summaryrefslogtreecommitdiff
path: root/drivers/net/hp-plus.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/hp-plus.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/hp-plus.c')
-rw-r--r--drivers/net/hp-plus.c495
1 files changed, 495 insertions, 0 deletions
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
new file mode 100644
index 000000000000..4834314b676d
--- /dev/null
+++ b/drivers/net/hp-plus.c
@@ -0,0 +1,495 @@
+/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */
+/*
+ Written 1994 by Donald Becker.
+
+ This driver is for the Hewlett Packard PC LAN (27***) plus ethercards.
+ These cards are sold under several model numbers, usually 2724*.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ As is often the case, a great deal of credit is owed to Russ Nelson.
+ The Crynwr packet driver was my primary source of HP-specific
+ programming information.
+*/
+
+static const char version[] =
+"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#include <linux/module.h>
+
+#include <linux/string.h> /* Important -- this inlines word moves. */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include "8390.h"
+
+#define DRV_NAME "hp-plus"
+
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int hpplus_portlist[] __initdata =
+{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
+
+/*
+ The HP EtherTwist chip implementation is a fairly routine DP8390
+ implementation. It allows both shared memory and programmed-I/O buffer
+ access, using a custom interface for both. The programmed-I/O mode is
+ entirely implemented in the HP EtherTwist chip, bypassing the problem
+ ridden built-in 8390 facilities used on NE2000 designs. The shared
+ memory mode is likewise special, with an offset register used to make
+ packets appear at the shared memory base. Both modes use a base and bounds
+ page register to hide the Rx ring buffer wrap -- a packet that spans the
+ end of physical buffer memory appears continuous to the driver. (c.f. the
+ 3c503 and Cabletron E2100)
+
+ A special note: the internal buffer of the board is only 8 bits wide.
+ This lays several nasty traps for the unaware:
+ - the 8390 must be programmed for byte-wide operations
+ - all I/O and memory operations must work on whole words (the access
+ latches are serially preloaded and have no byte-swapping ability).
+
+ This board is laid out in I/O space much like the earlier HP boards:
+ the first 16 locations are for the board registers, and the second 16 are
+ for the 8390. The board is easy to identify, with both a dedicated 16 bit
+ ID register and a constant 0x530* value in the upper bits of the paging
+ register.
+*/
+
+#define HP_ID 0x00 /* ID register, always 0x4850. */
+#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */
+#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */
+#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */
+#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */
+#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */
+#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */
+#define HP_IO_EXTENT 32
+
+#define HP_START_PG 0x00 /* First page of TX buffer */
+#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+/* The register set selected in HP_PAGING. */
+enum PageName {
+ Perf_Page = 0, /* Normal operation. */
+ MAC_Page = 1, /* The ethernet address (+checksum). */
+ HW_Page = 2, /* EEPROM-loaded hardware parameters. */
+ LAN_Page = 4, /* Transceiver selection, testing, etc. */
+ ID_Page = 6 };
+
+/* The bit definitions for the HPP_OPTION register. */
+enum HP_Option {
+ NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */
+ EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
+ MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
+
+static int hpp_probe1(struct net_device *dev, int ioaddr);
+
+static void hpp_reset_8390(struct net_device *dev);
+static int hpp_open(struct net_device *dev);
+static int hpp_close(struct net_device *dev);
+static void hpp_mem_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset);
+static void hpp_mem_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page);
+static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page);
+static void hpp_io_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset);
+static void hpp_io_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page);
+static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page);
+
+
+/* Probe a list of addresses for an HP LAN+ adaptor.
+ This routine is almost boilerplate. */
+
+static int __init do_hpp_probe(struct net_device *dev)
+{
+ int i;
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+
+ SET_MODULE_OWNER(dev);
+
+ if (base_addr > 0x1ff) /* Check a single specified location. */
+ return hpp_probe1(dev, base_addr);
+ else if (base_addr != 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ for (i = 0; hpplus_portlist[i]; i++) {
+ if (hpp_probe1(dev, hpplus_portlist[i]) == 0)
+ return 0;
+ dev->irq = irq;
+ }
+
+ return -ENODEV;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ /* NB: hpp_close() handles free_irq */
+ release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
+}
+
+#ifndef MODULE
+struct net_device * __init hp_plus_probe(int unit)
+{
+ struct net_device *dev = alloc_ei_netdev();
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_hpp_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+/* Do the interesting part of the probe at a single address. */
+static int __init hpp_probe1(struct net_device *dev, int ioaddr)
+{
+ int i, retval;
+ unsigned char checksum = 0;
+ const char name[] = "HP-PC-LAN+";
+ int mem_start;
+ static unsigned version_printed;
+
+ if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+
+ /* Check for the HP+ signature, 50 48 0x 53. */
+ if (inw(ioaddr + HP_ID) != 0x4850
+ || (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ if (ei_debug && version_printed++ == 0)
+ printk(version);
+
+ printk("%s: %s at %#3x,", dev->name, name, ioaddr);
+
+ /* Retrieve and checksum the station address. */
+ outw(MAC_Page, ioaddr + HP_PAGING);
+
+ for(i = 0; i < ETHER_ADDR_LEN; i++) {
+ unsigned char inval = inb(ioaddr + 8 + i);
+ dev->dev_addr[i] = inval;
+ checksum += inval;
+ printk(" %2.2x", inval);
+ }
+ checksum += inb(ioaddr + 14);
+
+ if (checksum != 0xff) {
+ printk(" bad checksum %2.2x.\n", checksum);
+ retval = -ENODEV;
+ goto out;
+ } else {
+ /* Point at the Software Configuration Flags. */
+ outw(ID_Page, ioaddr + HP_PAGING);
+ printk(" ID %4.4x", inw(ioaddr + 12));
+ }
+
+ /* Read the IRQ line. */
+ outw(HW_Page, ioaddr + HP_PAGING);
+ {
+ int irq = inb(ioaddr + 13) & 0x0f;
+ int option = inw(ioaddr + HPP_OPTION);
+
+ dev->irq = irq;
+ if (option & MemEnable) {
+ mem_start = inw(ioaddr + 9) << 8;
+ printk(", IRQ %d, memory address %#x.\n", irq, mem_start);
+ } else {
+ mem_start = 0;
+ printk(", IRQ %d, programmed-I/O mode.\n", irq);
+ }
+ }
+
+ /* Set the wrap registers for string I/O reads. */
+ outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
+
+ /* Set the base address to point to the NIC, not the "real" base! */
+ dev->base_addr = ioaddr + NIC_OFFSET;
+
+ dev->open = &hpp_open;
+ dev->stop = &hpp_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ei_poll;
+#endif
+
+ ei_status.name = name;
+ ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */
+ ei_status.tx_start_page = HP_START_PG;
+ ei_status.rx_start_page = HP_START_PG + TX_PAGES/2;
+ ei_status.stop_page = HP_STOP_PG;
+
+ ei_status.reset_8390 = &hpp_reset_8390;
+ ei_status.block_input = &hpp_io_block_input;
+ ei_status.block_output = &hpp_io_block_output;
+ ei_status.get_8390_hdr = &hpp_io_get_8390_hdr;
+
+ /* Check if the memory_enable flag is set in the option register. */
+ if (mem_start) {
+ ei_status.block_input = &hpp_mem_block_input;
+ ei_status.block_output = &hpp_mem_block_output;
+ ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr;
+ dev->mem_start = mem_start;
+ ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256;
+ dev->mem_end = ei_status.rmem_end
+ = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256;
+ }
+
+ outw(Perf_Page, ioaddr + HP_PAGING);
+ NS8390_init(dev, 0);
+ /* Leave the 8390 and HP chip reset. */
+ outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
+
+ return 0;
+out:
+ release_region(ioaddr, HP_IO_EXTENT);
+ return retval;
+}
+
+static int
+hpp_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg;
+ int retval;
+
+ if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ return retval;
+ }
+
+ /* Reset the 8390 and HP chip. */
+ option_reg = inw(ioaddr + HPP_OPTION);
+ outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
+ udelay(5);
+ /* Unreset the board and enable interrupts. */
+ outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
+
+ /* Set the wrap registers for programmed-I/O operation. */
+ outw(HW_Page, ioaddr + HP_PAGING);
+ outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
+
+ /* Select the operational page. */
+ outw(Perf_Page, ioaddr + HP_PAGING);
+
+ ei_open(dev);
+ return 0;
+}
+
+static int
+hpp_close(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg = inw(ioaddr + HPP_OPTION);
+
+ free_irq(dev->irq, dev);
+ ei_close(dev);
+ outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
+ ioaddr + HPP_OPTION);
+
+ return 0;
+}
+
+static void
+hpp_reset_8390(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg = inw(ioaddr + HPP_OPTION);
+
+ if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
+
+ outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
+ /* Pause a few cycles for the hardware reset to take place. */
+ udelay(5);
+ ei_status.txing = 0;
+ outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
+
+ udelay(5);
+
+
+ if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
+ printk("%s: hp_reset_8390() did not complete.\n", dev->name);
+
+ if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
+ return;
+}
+
+/* The programmed-I/O version of reading the 4 byte 8390 specific header.
+ Note that transfer with the EtherTwist+ must be on word boundaries. */
+
+static void
+hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+
+ outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
+ insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+}
+
+/* Block input and output, similar to the Crynwr packet driver. */
+
+static void
+hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ char *buf = skb->data;
+
+ outw(ring_offset, ioaddr + HPP_IN_ADDR);
+ insw(ioaddr + HP_DATAPORT, buf, count>>1);
+ if (count & 0x01)
+ buf[count-1] = inw(ioaddr + HP_DATAPORT);
+}
+
+/* The corresponding shared memory versions of the above 2 functions. */
+
+static void
+hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg = inw(ioaddr + HPP_OPTION);
+
+ outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
+ outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+ isa_memcpy_fromio(hdr, dev->mem_start, sizeof(struct e8390_pkt_hdr));
+ outw(option_reg, ioaddr + HPP_OPTION);
+ hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */
+}
+
+static void
+hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg = inw(ioaddr + HPP_OPTION);
+
+ outw(ring_offset, ioaddr + HPP_IN_ADDR);
+
+ outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+
+ /* Caution: this relies on get_8390_hdr() rounding up count!
+ Also note that we *can't* use eth_io_copy_and_sum() because
+ it will not always copy "count" bytes (e.g. padded IP). */
+
+ isa_memcpy_fromio(skb->data, dev->mem_start, count);
+ outw(option_reg, ioaddr + HPP_OPTION);
+}
+
+/* A special note: we *must* always transfer >=16 bit words.
+ It's always safe to round up, so we do. */
+static void
+hpp_io_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
+ outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
+ return;
+}
+
+static void
+hpp_mem_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page)
+{
+ int ioaddr = dev->base_addr - NIC_OFFSET;
+ int option_reg = inw(ioaddr + HPP_OPTION);
+
+ outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
+ outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+ isa_memcpy_toio(dev->mem_start, buf, (count + 3) & ~3);
+ outw(option_reg, ioaddr + HPP_OPTION);
+
+ return;
+}
+
+
+#ifdef MODULE
+#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */
+static struct net_device *dev_hpp[MAX_HPP_CARDS];
+static int io[MAX_HPP_CARDS];
+static int irq[MAX_HPP_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O port address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected");
+MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int
+init_module(void)
+{
+ struct net_device *dev;
+ int this_dev, found = 0;
+
+ for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
+ if (io[this_dev] == 0) {
+ if (this_dev != 0) break; /* only autoprobe 1st one */
+ printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
+ }
+ dev = alloc_ei_netdev();
+ if (!dev)
+ break;
+ dev->irq = irq[this_dev];
+ dev->base_addr = io[this_dev];
+ if (do_hpp_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_hpp[found++] = dev;
+ continue;
+ }
+ cleanup_card(dev);
+ }
+ free_netdev(dev);
+ printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+void
+cleanup_module(void)
+{
+ int this_dev;
+
+ for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
+ struct net_device *dev = dev_hpp[this_dev];
+ if (dev) {
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */