mrf24j40: use regmap for register access

This patch uses the regmap functions for transceiver register settings
where it's possible. This means everything except the hotpaths like
receive/transmit handling.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

1 files changed, 50 insertions, 97 deletions

diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index c8b7ce6b5462..ca98b5c603ce 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -543,35 +543,6 @@ static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value)
 	return ret;
 }
 
-static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val)
-{
-	int ret;
-	u16 cmd;
-	struct spi_message msg;
-	struct spi_transfer xfer = {
-		.len = 3,
-		.tx_buf = devrec->buf,
-		.rx_buf = devrec->buf,
-	};
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	cmd = MRF24J40_WRITELONG(reg);
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = cmd >> 8 & 0xff;
-	devrec->buf[1] = cmd & 0xff;
-	devrec->buf[2] = val;
-
-	ret = spi_sync(devrec->spi, &msg);
-	if (ret)
-		dev_err(printdev(devrec),
-			"SPI write Failed for long register 0x%hx\n", reg);
-
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
-}
-
 /* This function relies on an undocumented write method. Once a write command
    and address is set, as many bytes of data as desired can be clocked into
    the device. The datasheet only shows setting one byte at a time. */
@@ -755,33 +726,23 @@ static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
 static int mrf24j40_start(struct ieee802154_hw *hw)
 {
 	struct mrf24j40 *devrec = hw->priv;
-	u8 val;
-	int ret;
 
 	dev_dbg(printdev(devrec), "start\n");
 
-	ret = read_short_reg(devrec, REG_INTCON, &val);
-	if (ret)
-		return ret;
-	val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */
-	write_short_reg(devrec, REG_INTCON, val);
-
-	return 0;
+	/* Clear TXNIE and RXIE. Enable interrupts */
+	return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+				  0x01 | 0x08, 0x00);
 }
 
 static void mrf24j40_stop(struct ieee802154_hw *hw)
 {
 	struct mrf24j40 *devrec = hw->priv;
-	u8 val;
-	int ret;
 
 	dev_dbg(printdev(devrec), "stop\n");
 
-	ret = read_short_reg(devrec, REG_INTCON, &val);
-	if (ret)
-		return;
-	val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */
-	write_short_reg(devrec, REG_INTCON, val);
+	/* Set TXNIE and RXIE. Disable Interrupts */
+	regmap_update_bits(devrec->regmap_short, REG_INTCON, 0x01 | 0x08,
+			   0x01 | 0x08);
 }
 
 static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
@@ -798,20 +759,20 @@ static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 
 	/* Set Channel TODO */
 	val = (channel-11) << 4 | 0x03;
-	write_long_reg(devrec, REG_RFCON0, val);
+	ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, 0xf0, val);
+	if (ret)
+		return ret;
 
 	/* RF Reset */
-	ret = read_short_reg(devrec, REG_RFCTL, &val);
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, 0x04, 0x04);
 	if (ret)
 		return ret;
-	val |= 0x04;
-	write_short_reg(devrec, REG_RFCTL, val);
-	val &= ~0x04;
-	write_short_reg(devrec, REG_RFCTL, val);
 
-	udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, 0x04, 0x00);
+	if (!ret)
+		udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
 
-	return 0;
+	return ret;
 }
 
 static int mrf24j40_filter(struct ieee802154_hw *hw,
@@ -829,8 +790,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
 		addrl = le16_to_cpu(filt->short_addr) & 0xff;
 
-		write_short_reg(devrec, REG_SADRH, addrh);
-		write_short_reg(devrec, REG_SADRL, addrl);
+		regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+		regmap_write(devrec->regmap_short, REG_SADRL, addrl);
 		dev_dbg(printdev(devrec),
 			"Set short addr to %04hx\n", filt->short_addr);
 	}
@@ -841,7 +802,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 
 		memcpy(addr, &filt->ieee_addr, 8);
 		for (i = 0; i < 8; i++)
-			write_short_reg(devrec, REG_EADR0 + i, addr[i]);
+			regmap_write(devrec->regmap_short, REG_EADR0 + i,
+				     addr[i]);
 
 #ifdef DEBUG
 		pr_debug("Set long addr to: ");
@@ -857,8 +819,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 
 		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
 		panidl = le16_to_cpu(filt->pan_id) & 0xff;
-		write_short_reg(devrec, REG_PANIDH, panidh);
-		write_short_reg(devrec, REG_PANIDL, panidl);
+		regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+		regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
 
 		dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
 	}
@@ -868,14 +830,14 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 		u8 val;
 		int ret;
 
-		ret = read_short_reg(devrec, REG_RXMCR, &val);
-		if (ret)
-			return ret;
 		if (filt->pan_coord)
-			val |= 0x8;
+			val = 0x8;
 		else
-			val &= ~0x8;
-		write_short_reg(devrec, REG_RXMCR, val);
+			val = 0x0;
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x8,
+					 val);
+		if (ret)
+			return ret;
 
 		/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
 		 * REG_ORDER is maintained as default (no beacon/superframe).
@@ -976,80 +938,73 @@ out:
 static int mrf24j40_hw_init(struct mrf24j40 *devrec)
 {
 	int ret;
-	u8 val;
 
 	/* Initialize the device.
 		From datasheet section 3.2: Initialization. */
-	ret = write_short_reg(devrec, REG_SOFTRST, 0x07);
+	ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_PACON2, 0x98);
+	ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_TXSTBL, 0x95);
+	ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON0, 0x03);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON1, 0x01);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON2, 0x80);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON6, 0x90);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON7, 0x80);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON8, 0x10);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_SLPCON1, 0x21);
+	ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_BBREG2, 0x80);
+	ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_CCAEDTH, 0x60);
+	ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_BBREG6, 0x40);
+	ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_RFCTL, 0x04);
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_RFCTL, 0x0);
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
 	if (ret)
 		goto err_ret;
 
 	udelay(192);
 
 	/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
-	ret = read_short_reg(devrec, REG_RXMCR, &val);
-	if (ret)
-		goto err_ret;
-
-	val &= ~0x3; /* Clear RX mode (normal) */
-
-	ret = write_short_reg(devrec, REG_RXMCR, val);
+	ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
 	if (ret)
 		goto err_ret;
 
@@ -1057,22 +1012,20 @@ static int mrf24j40_hw_init(struct mrf24j40 *devrec)
 		/* Enable external amplifier.
 		 * From MRF24J40MC datasheet section 1.3: Operation.
 		 */
-		read_long_reg(devrec, REG_TESTMODE, &val);
-		val |= 0x7; /* Configure GPIO 0-2 to control amplifier */
-		write_long_reg(devrec, REG_TESTMODE, val);
+		regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+				   0x07);
 
-		read_short_reg(devrec, REG_TRISGPIO, &val);
-		val |= 0x8; /* Set GPIO3 as output. */
-		write_short_reg(devrec, REG_TRISGPIO, val);
+		/* Set GPIO3 as output. */
+		regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+				   0x08);
 
-		read_short_reg(devrec, REG_GPIO, &val);
-		val |= 0x8; /* Set GPIO3 HIGH to enable U5 voltage regulator */
-		write_short_reg(devrec, REG_GPIO, val);
+		/* Set GPIO3 HIGH to enable U5 voltage regulator */
+		regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
 
 		/* Reduce TX pwr to meet FCC requirements.
 		 * From MRF24J40MC datasheet section 3.1.1
 		 */
-		write_long_reg(devrec, REG_RFCON3, 0x28);
+		regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
 	}
 
 	return 0;