summaryrefslogtreecommitdiff
path: root/drivers/net/irda
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/irda
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/Kconfig404
-rw-r--r--drivers/net/irda/Makefile47
-rw-r--r--drivers/net/irda/act200l-sir.c257
-rw-r--r--drivers/net/irda/act200l.c297
-rw-r--r--drivers/net/irda/actisys-sir.c246
-rw-r--r--drivers/net/irda/actisys.c288
-rw-r--r--drivers/net/irda/ali-ircc.c2277
-rw-r--r--drivers/net/irda/ali-ircc.h231
-rw-r--r--drivers/net/irda/au1000_ircc.h127
-rw-r--r--drivers/net/irda/au1k_ir.c851
-rw-r--r--drivers/net/irda/donauboe.c1789
-rw-r--r--drivers/net/irda/donauboe.h363
-rw-r--r--drivers/net/irda/ep7211_ir.c122
-rw-r--r--drivers/net/irda/esi-sir.c159
-rw-r--r--drivers/net/irda/esi.c149
-rw-r--r--drivers/net/irda/girbil-sir.c258
-rw-r--r--drivers/net/irda/girbil.c250
-rw-r--r--drivers/net/irda/irda-usb.c1602
-rw-r--r--drivers/net/irda/irda-usb.h163
-rw-r--r--drivers/net/irda/irport.c1146
-rw-r--r--drivers/net/irda/irport.h80
-rw-r--r--drivers/net/irda/irtty-sir.c642
-rw-r--r--drivers/net/irda/irtty-sir.h34
-rw-r--r--drivers/net/irda/litelink-sir.c209
-rw-r--r--drivers/net/irda/litelink.c179
-rw-r--r--drivers/net/irda/ma600-sir.c264
-rw-r--r--drivers/net/irda/ma600.c354
-rw-r--r--drivers/net/irda/mcp2120-sir.c230
-rw-r--r--drivers/net/irda/mcp2120.c240
-rw-r--r--drivers/net/irda/nsc-ircc.c2222
-rw-r--r--drivers/net/irda/nsc-ircc.h280
-rw-r--r--drivers/net/irda/old_belkin-sir.c156
-rw-r--r--drivers/net/irda/old_belkin.c164
-rw-r--r--drivers/net/irda/sa1100_ir.c1045
-rw-r--r--drivers/net/irda/sir-dev.h202
-rw-r--r--drivers/net/irda/sir_core.c56
-rw-r--r--drivers/net/irda/sir_dev.c677
-rw-r--r--drivers/net/irda/sir_dongle.c134
-rw-r--r--drivers/net/irda/sir_kthread.c502
-rw-r--r--drivers/net/irda/smsc-ircc2.c2396
-rw-r--r--drivers/net/irda/smsc-ircc2.h194
-rw-r--r--drivers/net/irda/smsc-sio.h100
-rw-r--r--drivers/net/irda/stir4200.c1184
-rw-r--r--drivers/net/irda/tekram-sir.c232
-rw-r--r--drivers/net/irda/tekram.c282
-rw-r--r--drivers/net/irda/via-ircc.c1676
-rw-r--r--drivers/net/irda/via-ircc.h853
-rw-r--r--drivers/net/irda/vlsi_ir.c1912
-rw-r--r--drivers/net/irda/vlsi_ir.h798
-rw-r--r--drivers/net/irda/w83977af.h53
-rw-r--r--drivers/net/irda/w83977af_ir.c1379
-rw-r--r--drivers/net/irda/w83977af_ir.h199
52 files changed, 29954 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
new file mode 100644
index 000000000000..a464841da49f
--- /dev/null
+++ b/drivers/net/irda/Kconfig
@@ -0,0 +1,404 @@
+
+menu "Infrared-port device drivers"
+ depends on IRDA!=n
+
+comment "SIR device drivers"
+
+config IRTTY_SIR
+ tristate "IrTTY (uses Linux serial driver)"
+ depends on IRDA
+ help
+ Say Y here if you want to build support for the IrTTY line
+ discipline. To compile it as a module, choose M here: the module
+ will be called irtty-sir. IrTTY makes it possible to use Linux's
+ own serial driver for all IrDA ports that are 16550 compatible.
+ Most IrDA chips are 16550 compatible so you should probably say Y
+ to this option. Using IrTTY will however limit the speed of the
+ connection to 115200 bps (IrDA SIR mode).
+
+ If unsure, say Y.
+
+comment "Dongle support"
+
+config DONGLE
+ bool "Serial dongle support"
+ depends on IRTTY_SIR
+ help
+ Say Y here if you have an infrared device that connects to your
+ computer's serial port. These devices are called dongles. Then say Y
+ or M to the driver for your particular dongle below.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial dongles.
+
+config ESI_DONGLE
+ tristate "ESI JetEye PC dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Extended Systems
+ JetEye PC dongle. To compile it as a module, choose M here. The ESI
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for ESI
+ dongles you will have to start irattach like this:
+ "irattach -d esi".
+
+config ACTISYS_DONGLE
+ tristate "ACTiSYS IR-220L and IR220L+ dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-220L and
+ IR220L+ dongles. To compile it as a module, choose M here. The
+ ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS dongles you will have to start irattach like this:
+ "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+ tristate "Tekram IrMate 210B dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Tekram IrMate 210B
+ dongle. To compile it as a module, choose M here. The Tekram dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Tekram
+ dongles you will have to start irattach like this:
+ "irattach -d tekram".
+
+config LITELINK_DONGLE
+ tristate "Parallax LiteLink dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MA600_DONGLE
+ tristate "Mobile Action MA600 dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. The driver should also support
+ the MA620 USB version of the dongle, if the integrated USB-to-RS232
+ converter is supported by usbserial. To activate support for
+ MA600 dongle you will have to start irattach like this:
+ "irattach -d ma600".
+
+config GIRBIL_DONGLE
+ tristate "Greenwich GIrBIL dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. If you want to compile it as a module, choose M here.
+ The Greenwich dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for Greenwich dongles you will have to start irattach
+ like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+ tristate "Microchip MCP2120"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. If you want to compile it as a module, choose M here.
+ The MCP2120 dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for MCP2120 dongles you will have to start irattach
+ like this: "irattach -d mcp2120".
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+ tristate "Old Belkin dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. If you want to compile it as a module, choose
+ M here. Some information is contained in the comments
+ at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE
+ tristate "ACTiSYS IR-200L dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. If you want to compile it as a module, choose M here.
+ The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+ port connector, and can currently only be used by IrTTY.
+ To activate support for ACTiSYS IR-200L dongle you will have to
+ start irattach like this: "irattach -d act200l".
+
+comment "Old SIR device drivers"
+
+config IRPORT_SIR
+ tristate "IrPORT (IrDA serial driver)"
+ depends on IRDA && BROKEN_ON_SMP
+ ---help---
+ Say Y here if you want to build support for the IrPORT IrDA device
+ driver. To compile it as a module, choose M here: the module will be
+ called irport. IrPORT can be used instead of IrTTY and sometimes
+ this can be better. One example is if your IrDA port does not
+ have echo-canceling, which will work OK with IrPORT since this
+ driver is working in half-duplex mode only. You don't need to use
+ irattach with IrPORT, but you just insert it the same way as FIR
+ drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
+ SIR device driver which means that speed is limited to 115200 bps.
+
+ If unsure, say Y.
+
+comment "Old Serial dongle support"
+
+config DONGLE_OLD
+ bool "Old Serial dongle support"
+ depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
+ help
+ Say Y here if you have an infrared device that connects to your
+ computer's serial port. These devices are called dongles. Then say Y
+ or M to the driver for your particular dongle below.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial dongles.
+
+config ESI_DONGLE_OLD
+ tristate "ESI JetEye PC dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Extended Systems
+ JetEye PC dongle. To compile it as a module, choose M here. The ESI
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for ESI
+ dongles you will have to start irattach like this:
+ "irattach -d esi".
+
+config ACTISYS_DONGLE_OLD
+ tristate "ACTiSYS IR-220L and IR220L+ dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-220L and
+ IR220L+ dongles. To compile it as a module, choose M here. The
+ ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS dongles you will have to start irattach like this:
+ "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE_OLD
+ tristate "Tekram IrMate 210B dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Tekram IrMate 210B
+ dongle. To compile it as a module, choose M here. The Tekram dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Tekram
+ dongles you will have to start irattach like this:
+ "irattach -d tekram".
+
+config GIRBIL_DONGLE_OLD
+ tristate "Greenwich GIrBIL dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. To compile it as a module, choose M here. The Greenwich
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Greenwich
+ dongles you will have to insert "irattach -d girbil" in the
+ /etc/irda/drivers script.
+
+config LITELINK_DONGLE_OLD
+ tristate "Parallax LiteLink dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MCP2120_DONGLE_OLD
+ tristate "Microchip MCP2120"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. To compile it as a module, choose M here. The MCP2120 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for MCP2120
+ dongles you will have to insert "irattach -d mcp2120" in the
+ /etc/irda/drivers script.
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE_OLD
+ tristate "Old Belkin dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. To compile it as a module, choose M here: the module
+ will be called old_belkin. Some information is contained in the
+ comments at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE_OLD
+ tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
+ depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. To compile it as a module, choose M here. The ACTiSYS
+ IR-200L dongle attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS IR-200L dongles you will have to start irattach like this:
+ "irattach -d act200l".
+
+config MA600_DONGLE_OLD
+ tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
+ depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+ ---help---
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be tested on IrCOMM. To activate support for MA600
+ dongles you will have to insert "irattach -d ma600" in the
+ /etc/irda/drivers script. Note: irutils 0.9.15 requires no
+ modification. irutils 0.9.9 needs modification. For more
+ information, download the following tar gzip file.
+
+ There is a pre-compiled module on
+ <http://engsvr.ust.hk/~eetwl95/ma600.html>
+
+config EP7211_IR
+ tristate "EP7211 I/R support"
+ depends on DONGLE_OLD && ARCH_EP7211 && IRDA
+
+comment "FIR device drivers"
+
+config USB_IRDA
+ tristate "IrDA USB dongles"
+ depends on IRDA && USB
+ ---help---
+ Say Y here if you want to build support for the USB IrDA FIR Dongle
+ device driver. To compile it as a module, choose M here: the module
+ will be called irda-usb. IrDA-USB support the various IrDA USB
+ dongles available and most of their pecularities. Those dongles
+ plug in the USB port of your computer, are plug and play, and
+ support SIR and FIR (4Mbps) speeds. On the other hand, those
+ dongles tend to be less efficient than a FIR chipset.
+
+ Please note that the driver is still experimental. And of course,
+ you will need both USB and IrDA support in your kernel...
+
+config SIGMATEL_FIR
+ tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y here if you want to build support for the SigmaTel STIr4200
+ USB IrDA FIR bridge device driver.
+
+ USB bridge based on the SigmaTel STIr4200 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ stir4200.
+
+config NSC_FIR
+ tristate "NSC PC87108/PC87338"
+ depends on IRDA && ISA
+ help
+ Say Y here if you want to build support for the NSC PC87108 and
+ PC87338 IrDA chipsets. This driver supports SIR,
+ MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ nsc-ircc.
+
+config WINBOND_FIR
+ tristate "Winbond W83977AF (IR)"
+ depends on IRDA && ISA
+ help
+ Say Y here if you want to build IrDA support for the Winbond
+ W83977AF super-io chipset. This driver should be used for the IrDA
+ chipset in the Corel NetWinder. The driver supports SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ w83977af_ir.
+
+config TOSHIBA_FIR
+ tristate "Toshiba Type-O IR Port"
+ depends on IRDA && PCI && !64BIT
+ help
+ Say Y here if you want to build support for the Toshiba Type-O IR
+ and Donau oboe chipsets. These chipsets are used by the Toshiba
+ Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+ To compile it as a module, choose M here: the module will be called
+ donauboe.
+
+config AU1000_FIR
+ tristate "Alchemy Au1000 SIR/FIR"
+ depends on MIPS_AU1000 && IRDA
+
+config SMC_IRCC_FIR
+ tristate "SMSC IrCC (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && ISA
+ help
+ Say Y here if you want to build support for the SMC Infrared
+ Communications Controller. It is used in a wide variety of
+ laptops (Fujitsu, Sony, Compaq and some Toshiba).
+ To compile it as a module, choose M here: the module will be called
+ smsc-ircc2.o.
+
+config ALI_FIR
+ tristate "ALi M5123 FIR (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && ISA
+ help
+ Say Y here if you want to build support for the ALi M5123 FIR
+ Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
+ M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ SIR, MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ ali-ircc.
+
+config VLSI_FIR
+ tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && PCI
+ help
+ Say Y here if you want to build support for the VLSI 82C147
+ PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+ and 5500 notebooks. The driver provides support for SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ vlsi_ir.
+
+config SA1100_FIR
+ tristate "SA1100 Internal IR"
+ depends on ARCH_SA1100 && IRDA
+
+config VIA_FIR
+ tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
+ depends on IRDA && ISA && PCI
+ help
+ Say Y here if you want to build support for the VIA VT8231
+ and VIA VT1211 IrDA controllers, found on the motherboards using
+ those those VIA chipsets. To use this controller, you will need
+ to plug a specific 5 pins FIR IrDA dongle in the specific
+ motherboard connector. The driver provides support for SIR, MIR
+ and FIR (4Mbps) speeds.
+
+ You will need to specify the 'dongle_id' module parameter to
+ indicate the FIR dongle attached to the controller.
+
+ To compile it as a module, choose M here: the module will be called
+ via-ircc.
+
+endmenu
+
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
new file mode 100644
index 000000000000..29a8bd812b21
--- /dev/null
+++ b/drivers/net/irda/Makefile
@@ -0,0 +1,47 @@
+#
+# Makefile for the Linux IrDA infrared port device drivers.
+#
+# 9 Aug 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+# Old SIR drivers
+obj-$(CONFIG_IRPORT_SIR) += irport.o
+# FIR drivers
+obj-$(CONFIG_USB_IRDA) += irda-usb.o
+obj-$(CONFIG_SIGMATEL_FIR) += stir4200.o
+obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
+obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
+obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o
+obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o
+obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o
+obj-$(CONFIG_ALI_FIR) += ali-ircc.o
+obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
+obj-$(CONFIG_VIA_FIR) += via-ircc.o
+# Old dongle drivers for old SIR drivers
+obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
+obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
+obj-$(CONFIG_ACTISYS_DONGLE_OLD) += actisys.o
+obj-$(CONFIG_GIRBIL_DONGLE_OLD) += girbil.o
+obj-$(CONFIG_LITELINK_DONGLE_OLD) += litelink.o
+obj-$(CONFIG_OLD_BELKIN_DONGLE_OLD) += old_belkin.o
+obj-$(CONFIG_MCP2120_DONGLE_OLD) += mcp2120.o
+obj-$(CONFIG_ACT200L_DONGLE_OLD) += act200l.o
+obj-$(CONFIG_MA600_DONGLE_OLD) += ma600.o
+obj-$(CONFIG_EP7211_IR) += ep7211_ir.o
+obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
+# New SIR drivers
+obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
+# New dongles drivers for new SIR drivers
+obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
+obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
+obj-$(CONFIG_ACTISYS_DONGLE) += actisys-sir.o
+obj-$(CONFIG_LITELINK_DONGLE) += litelink-sir.o
+obj-$(CONFIG_GIRBIL_DONGLE) += girbil-sir.o
+obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin-sir.o
+obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o
+obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
+obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
+
+# The SIR helper module
+sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
new file mode 100644
index 000000000000..d8b89c74aabd
--- /dev/null
+++ b/drivers/net/irda/act200l-sir.c
@@ -0,0 +1,257 @@
+/*********************************************************************
+ *
+ * Filename: act200l.c
+ * Version: 0.8
+ * Description: Implementation for the ACTiSYS ACT-IR200L dongle
+ * Status: Experimental.
+ * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ * Created at: Fri Aug 3 17:35:42 2001
+ * Modified at: Fri Aug 17 10:22:40 2001
+ * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ *
+ * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int act200l_reset(struct sir_dev *dev);
+static int act200l_open(struct sir_dev *dev);
+static int act200l_close(struct sir_dev *dev);
+static int act200l_change_speed(struct sir_dev *dev, unsigned speed);
+
+/* Regsiter 0: Control register #1 */
+#define ACT200L_REG0 0x00
+#define ACT200L_TXEN 0x01 /* Enable transmitter */
+#define ACT200L_RXEN 0x02 /* Enable receiver */
+
+/* Register 1: Control register #2 */
+#define ACT200L_REG1 0x10
+#define ACT200L_LODB 0x01 /* Load new baud rate count value */
+#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
+
+/* Register 4: Output Power register */
+#define ACT200L_REG4 0x40
+#define ACT200L_OP0 0x01 /* Enable LED1C output */
+#define ACT200L_OP1 0x02 /* Enable LED2C output */
+#define ACT200L_BLKR 0x04
+
+/* Register 5: Receive Mode register */
+#define ACT200L_REG5 0x50
+#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
+
+/* Register 6: Receive Sensitivity register #1 */
+#define ACT200L_REG6 0x60
+#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
+#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
+
+/* Register 7: Receive Sensitivity register #2 */
+#define ACT200L_REG7 0x70
+#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
+
+/* Register 8,9: Baud Rate Dvider register #1,#2 */
+#define ACT200L_REG8 0x80
+#define ACT200L_REG9 0x90
+
+#define ACT200L_2400 0x5f
+#define ACT200L_9600 0x17
+#define ACT200L_19200 0x0b
+#define ACT200L_38400 0x05
+#define ACT200L_57600 0x03
+#define ACT200L_115200 0x01
+
+/* Register 13: Control register #3 */
+#define ACT200L_REG13 0xd0
+#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
+
+/* Register 15: Status register */
+#define ACT200L_REG15 0xf0
+
+/* Register 21: Control register #4 */
+#define ACT200L_REG21 0x50
+#define ACT200L_EXCK 0x02 /* Disable clock output driver */
+#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
+
+static struct dongle_driver act200l = {
+ .owner = THIS_MODULE,
+ .driver_name = "ACTiSYS ACT-IR200L",
+ .type = IRDA_ACT200L_DONGLE,
+ .open = act200l_open,
+ .close = act200l_close,
+ .reset = act200l_reset,
+ .set_speed = act200l_change_speed,
+};
+
+static int __init act200l_sir_init(void)
+{
+ return irda_register_dongle(&act200l);
+}
+
+static void __exit act200l_sir_cleanup(void)
+{
+ irda_unregister_dongle(&act200l);
+}
+
+static int act200l_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power on the dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x03;
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int act200l_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power off the dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function act200l_change_speed (dev, speed)
+ *
+ * Set the speed for the ACTiSYS ACT-IR200L type dongle.
+ *
+ */
+static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ u8 control[3];
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Clear DTR and set RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ switch (speed) {
+ default:
+ ret = -EINVAL;
+ /* fall through */
+ case 9600:
+ control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
+ break;
+ case 19200:
+ control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
+ break;
+ case 38400:
+ control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
+ break;
+ case 57600:
+ control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
+ break;
+ case 115200:
+ control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
+ break;
+ }
+ control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, 3);
+ msleep(5);
+
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ dev->speed = speed;
+ return ret;
+}
+
+/*
+ * Function act200l_reset (driver)
+ *
+ * Reset the ACTiSYS ACT-IR200L type dongle.
+ */
+
+#define ACT200L_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1)
+#define ACT200L_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2)
+
+static int act200l_reset(struct sir_dev *dev)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 control[9] = {
+ ACT200L_REG15,
+ ACT200L_REG13 | ACT200L_SHDW,
+ ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
+ ACT200L_REG13,
+ ACT200L_REG7 | ACT200L_ENPOS,
+ ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
+ ACT200L_REG5 | ACT200L_RWIDL,
+ ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
+ ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
+ };
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ switch (state) {
+ case SIRDEV_STATE_DONGLE_RESET:
+ /* Reset the dongle : set RTS low for 25 ms */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ state = ACT200L_STATE_WAIT1_RESET;
+ delay = 50;
+ break;
+
+ case ACT200L_STATE_WAIT1_RESET:
+ /* Clear DTR and set RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ udelay(25); /* better wait for some short while */
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, sizeof(control));
+ state = ACT200L_STATE_WAIT2_RESET;
+ delay = 15;
+ break;
+
+ case ACT200L_STATE_WAIT2_RESET:
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ dev->speed = 9600;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state);
+ ret = -1;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
+MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
+
+module_init(act200l_sir_init);
+module_exit(act200l_sir_cleanup);
diff --git a/drivers/net/irda/act200l.c b/drivers/net/irda/act200l.c
new file mode 100644
index 000000000000..756cd44e857a
--- /dev/null
+++ b/drivers/net/irda/act200l.c
@@ -0,0 +1,297 @@
+/*********************************************************************
+ *
+ * Filename: act200l.c
+ * Version: 0.8
+ * Description: Implementation for the ACTiSYS ACT-IR200L dongle
+ * Status: Experimental.
+ * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ * Created at: Fri Aug 3 17:35:42 2001
+ * Modified at: Fri Aug 17 10:22:40 2001
+ * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
+ *
+ * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+static int act200l_reset(struct irda_task *task);
+static void act200l_open(dongle_t *self, struct qos_info *qos);
+static void act200l_close(dongle_t *self);
+static int act200l_change_speed(struct irda_task *task);
+
+/* Regsiter 0: Control register #1 */
+#define ACT200L_REG0 0x00
+#define ACT200L_TXEN 0x01 /* Enable transmitter */
+#define ACT200L_RXEN 0x02 /* Enable receiver */
+
+/* Register 1: Control register #2 */
+#define ACT200L_REG1 0x10
+#define ACT200L_LODB 0x01 /* Load new baud rate count value */
+#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
+
+/* Register 4: Output Power register */
+#define ACT200L_REG4 0x40
+#define ACT200L_OP0 0x01 /* Enable LED1C output */
+#define ACT200L_OP1 0x02 /* Enable LED2C output */
+#define ACT200L_BLKR 0x04
+
+/* Register 5: Receive Mode register */
+#define ACT200L_REG5 0x50
+#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
+
+/* Register 6: Receive Sensitivity register #1 */
+#define ACT200L_REG6 0x60
+#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
+#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
+
+/* Register 7: Receive Sensitivity register #2 */
+#define ACT200L_REG7 0x70
+#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
+
+/* Register 8,9: Baud Rate Dvider register #1,#2 */
+#define ACT200L_REG8 0x80
+#define ACT200L_REG9 0x90
+
+#define ACT200L_2400 0x5f
+#define ACT200L_9600 0x17
+#define ACT200L_19200 0x0b
+#define ACT200L_38400 0x05
+#define ACT200L_57600 0x03
+#define ACT200L_115200 0x01
+
+/* Register 13: Control register #3 */
+#define ACT200L_REG13 0xd0
+#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
+
+/* Register 15: Status register */
+#define ACT200L_REG15 0xf0
+
+/* Register 21: Control register #4 */
+#define ACT200L_REG21 0x50
+#define ACT200L_EXCK 0x02 /* Disable clock output driver */
+#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
+
+static struct dongle_reg dongle = {
+ .type = IRDA_ACT200L_DONGLE,
+ .open = act200l_open,
+ .close = act200l_close,
+ .reset = act200l_reset,
+ .change_speed = act200l_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init act200l_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit act200l_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void act200l_open(dongle_t *self, struct qos_info *qos)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power on the dongle */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x03;
+}
+
+static void act200l_close(dongle_t *self)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power off the dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function act200l_change_speed (dev, speed)
+ *
+ * Set the speed for the ACTiSYS ACT-IR200L type dongle.
+ *
+ */
+static int act200l_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ __u8 control[3];
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ self->speed_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ if (irda_task_execute(self, act200l_reset, NULL, task,
+ (void *) speed))
+ {
+ /* Dongle need more time to reset */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* Give reset 1 sec to finish */
+ ret = msecs_to_jiffies(1000);
+ }
+ break;
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), resetting dongle timed out!\n",
+ __FUNCTION__);
+ ret = -1;
+ break;
+ case IRDA_TASK_CHILD_DONE:
+ /* Clear DTR and set RTS to enter command mode */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+
+ switch (speed) {
+ case 9600:
+ default:
+ control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
+ break;
+ case 19200:
+ control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
+ break;
+ case 38400:
+ control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
+ break;
+ case 57600:
+ control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
+ break;
+ case 115200:
+ control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
+ control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
+ break;
+ }
+ control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
+
+ /* Write control bytes */
+ self->write(self->dev, control, 3);
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+ ret = msecs_to_jiffies(5);
+ break;
+ case IRDA_TASK_WAIT:
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function act200l_reset (driver)
+ *
+ * Reset the ACTiSYS ACT-IR200L type dongle.
+ */
+static int act200l_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u8 control[9] = {
+ ACT200L_REG15,
+ ACT200L_REG13 | ACT200L_SHDW,
+ ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
+ ACT200L_REG13,
+ ACT200L_REG7 | ACT200L_ENPOS,
+ ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
+ ACT200L_REG5 | ACT200L_RWIDL,
+ ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
+ ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
+ };
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ self->reset_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Power on the dongle */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+ ret = msecs_to_jiffies(50);
+ break;
+ case IRDA_TASK_WAIT1:
+ /* Reset the dongle : set RTS low for 25 ms */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+ ret = msecs_to_jiffies(50);
+ break;
+ case IRDA_TASK_WAIT2:
+ /* Clear DTR and set RTS to enter command mode */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+
+ /* Write control bytes */
+ self->write(self->dev, control, 9);
+ irda_task_next_state(task, IRDA_TASK_WAIT3);
+ ret = msecs_to_jiffies(15);
+ break;
+ case IRDA_TASK_WAIT3:
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
+MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize ACTiSYS ACT-IR200L module
+ *
+ */
+module_init(act200l_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup ACTiSYS ACT-IR200L module
+ *
+ */
+module_exit(act200l_cleanup);
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
new file mode 100644
index 000000000000..9715ab5572e9
--- /dev/null
+++ b/drivers/net/irda/actisys-sir.c
@@ -0,0 +1,246 @@
+/*********************************************************************
+ *
+ * Filename: actisys.c
+ * Version: 1.1
+ * Description: Implementation for the ACTiSYS IR-220L and IR-220L+
+ * dongles
+ * Status: Beta.
+ * Authors: Dag Brattli <dagb@cs.uit.no> (initially)
+ * Jean Tourrilhes <jt@hpl.hp.com> (new version)
+ * Martin Diehl <mad@mdiehl.de> (new version for sir_dev)
+ * Created at: Wed Oct 21 20:02:35 1998
+ * Modified at: Sun Oct 27 22:02:13 2002
+ * Modified by: Martin Diehl <mad@mdiehl.de>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 1999 Jean Tourrilhes
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * Changelog
+ *
+ * 0.8 -> 0.9999 - Jean
+ * o New initialisation procedure : much safer and correct
+ * o New procedure the change speed : much faster and simpler
+ * o Other cleanups & comments
+ * Thanks to Lichen Wang @ Actisys for his excellent help...
+ *
+ * 1.0 -> 1.1 - Martin Diehl
+ * modified for new sir infrastructure
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/*
+ * Define the timing of the pulses we send to the dongle (to reset it, and
+ * to toggle speeds). Basically, the limit here is the propagation speed of
+ * the signals through the serial port, the dongle being much faster. Any
+ * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
+ * go through cleanly . If you are on the wild side, you can try to lower
+ * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
+ */
+#define MIN_DELAY 10 /* 10 us to be on the conservative side */
+
+static int actisys_open(struct sir_dev *);
+static int actisys_close(struct sir_dev *);
+static int actisys_change_speed(struct sir_dev *, unsigned);
+static int actisys_reset(struct sir_dev *);
+
+/* These are the baudrates supported, in the order available */
+/* Note : the 220L doesn't support 38400, but we will fix that below */
+static unsigned baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
+
+#define MAX_SPEEDS (sizeof(baud_rates)/sizeof(baud_rates[0]))
+
+static struct dongle_driver act220l = {
+ .owner = THIS_MODULE,
+ .driver_name = "Actisys ACT-220L",
+ .type = IRDA_ACTISYS_DONGLE,
+ .open = actisys_open,
+ .close = actisys_close,
+ .reset = actisys_reset,
+ .set_speed = actisys_change_speed,
+};
+
+static struct dongle_driver act220l_plus = {
+ .owner = THIS_MODULE,
+ .driver_name = "Actisys ACT-220L+",
+ .type = IRDA_ACTISYS_PLUS_DONGLE,
+ .open = actisys_open,
+ .close = actisys_close,
+ .reset = actisys_reset,
+ .set_speed = actisys_change_speed,
+};
+
+static int __init actisys_sir_init(void)
+{
+ int ret;
+
+ /* First, register an Actisys 220L dongle */
+ ret = irda_register_dongle(&act220l);
+ if (ret < 0)
+ return ret;
+
+ /* Now, register an Actisys 220L+ dongle */
+ ret = irda_register_dongle(&act220l_plus);
+ if (ret < 0) {
+ irda_unregister_dongle(&act220l);
+ return ret;
+ }
+ return 0;
+}
+
+static void __exit actisys_sir_cleanup(void)
+{
+ /* We have to remove both dongles */
+ irda_unregister_dongle(&act220l_plus);
+ irda_unregister_dongle(&act220l);
+}
+
+static int actisys_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+
+ /* Remove support for 38400 if this is not a 220L+ dongle */
+ if (dev->dongle_drv->type == IRDA_ACTISYS_DONGLE)
+ qos->baud_rate.bits &= ~IR_38400;
+
+ qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int actisys_close(struct sir_dev *dev)
+{
+ /* Power off the dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function actisys_change_speed (task)
+ *
+ * Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
+ * To cycle through the available baud rates, pulse RTS low for a few us.
+ *
+ * First, we reset the dongle to always start from a known state.
+ * Then, we cycle through the speeds by pulsing RTS low and then up.
+ * The dongle allow us to pulse quite fast, se we can set speed in one go,
+ * which is must faster ( < 100 us) and less complex than what is found
+ * in some other dongle drivers...
+ * Note that even if the new speed is the same as the current speed,
+ * we reassert the speed. This make sure that things are all right,
+ * and it's fast anyway...
+ * By the way, this function will work for both type of dongles,
+ * because the additional speed is at the end of the sequence...
+ */
+static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ int ret = 0;
+ int i = 0;
+
+ IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+ speed, dev->speed);
+
+ /* dongle was already resetted from irda_request state machine,
+ * we are in known state (dongle default)
+ */
+
+ /*
+ * Now, we can set the speed requested. Send RTS pulses until we
+ * reach the target speed
+ */
+ for (i = 0; i < MAX_SPEEDS; i++) {
+ if (speed == baud_rates[i]) {
+ dev->speed = speed;
+ break;
+ }
+ /* Set RTS low for 10 us */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ udelay(MIN_DELAY);
+
+ /* Set RTS high for 10 us */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ udelay(MIN_DELAY);
+ }
+
+ /* Check if life is sweet... */
+ if (i >= MAX_SPEEDS) {
+ actisys_reset(dev);
+ ret = -EINVAL; /* This should not happen */
+ }
+
+ /* Basta lavoro, on se casse d'ici... */
+ return ret;
+}
+
+/*
+ * Function actisys_reset (task)
+ *
+ * Reset the Actisys type dongle. Warning, this function must only be
+ * called with a process context!
+ *
+ * We need to do two things in this function :
+ * o first make sure that the dongle is in a state where it can operate
+ * o second put the dongle in a know state
+ *
+ * The dongle is powered of the RTS and DTR lines. In the dongle, there
+ * is a big capacitor to accommodate the current spikes. This capacitor
+ * takes a least 50 ms to be charged. In theory, the Bios set those lines
+ * up, so by the time we arrive here we should be set. It doesn't hurt
+ * to be on the conservative side, so we will wait...
+ * <Martin : move above comment to irda_config_fsm>
+ * Then, we set the speed to 9600 b/s to get in a known state (see in
+ * change_speed for details). It is needed because the IrDA stack
+ * has tried to set the speed immediately after our first return,
+ * so before we can be sure the dongle is up and running.
+ */
+
+static int actisys_reset(struct sir_dev *dev)
+{
+ /* Reset the dongle : set DTR low for 10 us */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ dev->speed = 9600; /* That's the default */
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
+MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
+
+module_init(actisys_sir_init);
+module_exit(actisys_sir_cleanup);
diff --git a/drivers/net/irda/actisys.c b/drivers/net/irda/actisys.c
new file mode 100644
index 000000000000..b2e31f4a384c
--- /dev/null
+++ b/drivers/net/irda/actisys.c
@@ -0,0 +1,288 @@
+/*********************************************************************
+ *
+ * Filename: actisys.c
+ * Version: 1.0
+ * Description: Implementation for the ACTiSYS IR-220L and IR-220L+
+ * dongles
+ * Status: Beta.
+ * Authors: Dag Brattli <dagb@cs.uit.no> (initially)
+ * Jean Tourrilhes <jt@hpl.hp.com> (new version)
+ * Created at: Wed Oct 21 20:02:35 1998
+ * Modified at: Fri Dec 17 09:10:43 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 1999 Jean Tourrilhes
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * Changelog
+ *
+ * 0.8 -> 0.9999 - Jean
+ * o New initialisation procedure : much safer and correct
+ * o New procedure the change speed : much faster and simpler
+ * o Other cleanups & comments
+ * Thanks to Lichen Wang @ Actisys for his excellent help...
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+/*
+ * Define the timing of the pulses we send to the dongle (to reset it, and
+ * to toggle speeds). Basically, the limit here is the propagation speed of
+ * the signals through the serial port, the dongle being much faster. Any
+ * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
+ * go through cleanly . If you are on the wild side, you can try to lower
+ * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
+ */
+#define MIN_DELAY 10 /* 10 us to be on the conservative side */
+
+static int actisys_change_speed(struct irda_task *task);
+static int actisys_reset(struct irda_task *task);
+static void actisys_open(dongle_t *self, struct qos_info *qos);
+static void actisys_close(dongle_t *self);
+
+/* These are the baudrates supported, in the order available */
+/* Note : the 220L doesn't support 38400, but we will fix that below */
+static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
+#define MAX_SPEEDS 5
+
+static struct dongle_reg dongle = {
+ .type = IRDA_ACTISYS_DONGLE,
+ .open = actisys_open,
+ .close = actisys_close,
+ .reset = actisys_reset,
+ .change_speed = actisys_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static struct dongle_reg dongle_plus = {
+ .type = IRDA_ACTISYS_PLUS_DONGLE,
+ .open = actisys_open,
+ .close = actisys_close,
+ .reset = actisys_reset,
+ .change_speed = actisys_change_speed,
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Function actisys_change_speed (task)
+ *
+ * There is two model of Actisys dongle we are dealing with,
+ * the 220L and 220L+. At this point, only irattach knows with
+ * kind the user has requested (it was an argument on irattach
+ * command line).
+ * So, we register a dongle of each sort and let irattach
+ * pick the right one...
+ */
+static int __init actisys_init(void)
+{
+ int ret;
+
+ /* First, register an Actisys 220L dongle */
+ ret = irda_device_register_dongle(&dongle);
+ if (ret < 0)
+ return ret;
+ /* Now, register an Actisys 220L+ dongle */
+ ret = irda_device_register_dongle(&dongle_plus);
+ if (ret < 0) {
+ irda_device_unregister_dongle(&dongle);
+ return ret;
+ }
+ return 0;
+}
+
+static void __exit actisys_cleanup(void)
+{
+ /* We have to remove both dongles */
+ irda_device_unregister_dongle(&dongle);
+ irda_device_unregister_dongle(&dongle_plus);
+}
+
+static void actisys_open(dongle_t *self, struct qos_info *qos)
+{
+ /* Power on the dongle */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+
+ /* Remove support for 38400 if this is not a 220L+ dongle */
+ if (self->issue->type == IRDA_ACTISYS_DONGLE)
+ qos->baud_rate.bits &= ~IR_38400;
+
+ qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
+}
+
+static void actisys_close(dongle_t *self)
+{
+ /* Power off the dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function actisys_change_speed (task)
+ *
+ * Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
+ * To cycle through the available baud rates, pulse RTS low for a few us.
+ *
+ * First, we reset the dongle to always start from a known state.
+ * Then, we cycle through the speeds by pulsing RTS low and then up.
+ * The dongle allow us to pulse quite fast, se we can set speed in one go,
+ * which is must faster ( < 100 us) and less complex than what is found
+ * in some other dongle drivers...
+ * Note that even if the new speed is the same as the current speed,
+ * we reassert the speed. This make sure that things are all right,
+ * and it's fast anyway...
+ * By the way, this function will work for both type of dongles,
+ * because the additional speed is at the end of the sequence...
+ */
+static int actisys_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param; /* Target speed */
+ int ret = 0;
+ int i = 0;
+
+ IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, speed,
+ self->speed);
+
+ /* Go to a known state by reseting the dongle */
+
+ /* Reset the dongle : set DTR low for 10 us */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode (we are now at 9600 b/s) */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /*
+ * Now, we can set the speed requested. Send RTS pulses until we
+ * reach the target speed
+ */
+ for (i=0; i<MAX_SPEEDS; i++) {
+ if (speed == baud_rates[i]) {
+ self->speed = baud_rates[i];
+ break;
+ }
+ /* Make sure previous pulse is finished */
+ udelay(MIN_DELAY);
+
+ /* Set RTS low for 10 us */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+ udelay(MIN_DELAY);
+
+ /* Set RTS high for 10 us */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ }
+
+ /* Check if life is sweet... */
+ if (i >= MAX_SPEEDS)
+ ret = -1; /* This should not happen */
+
+ /* Basta lavoro, on se casse d'ici... */
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return ret;
+}
+
+/*
+ * Function actisys_reset (task)
+ *
+ * Reset the Actisys type dongle. Warning, this function must only be
+ * called with a process context!
+ *
+ * We need to do two things in this function :
+ * o first make sure that the dongle is in a state where it can operate
+ * o second put the dongle in a know state
+ *
+ * The dongle is powered of the RTS and DTR lines. In the dongle, there
+ * is a big capacitor to accommodate the current spikes. This capacitor
+ * takes a least 50 ms to be charged. In theory, the Bios set those lines
+ * up, so by the time we arrive here we should be set. It doesn't hurt
+ * to be on the conservative side, so we will wait...
+ * Then, we set the speed to 9600 b/s to get in a known state (see in
+ * change_speed for details). It is needed because the IrDA stack
+ * has tried to set the speed immediately after our first return,
+ * so before we can be sure the dongle is up and running.
+ */
+static int actisys_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ int ret = 0;
+
+ IRDA_ASSERT(task != NULL, return -1;);
+
+ self->reset_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Set both DTR & RTS to power up the dongle */
+ /* In theory redundant with power up in actisys_open() */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep 50 ms to make sure capacitor is charged */
+ ret = msecs_to_jiffies(50);
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+ break;
+ case IRDA_TASK_WAIT:
+ /* Reset the dongle : set DTR low for 10 us */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ self->speed = 9600; /* That's the default */
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
+MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
+
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Actisys module
+ *
+ */
+module_init(actisys_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Actisys module
+ *
+ */
+module_exit(actisys_cleanup);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
new file mode 100644
index 000000000000..9bf34681d3df
--- /dev/null
+++ b/drivers/net/irda/ali-ircc.c
@@ -0,0 +1,2277 @@
+/*********************************************************************
+ *
+ * Filename: ali-ircc.h
+ * Version: 0.5
+ * Description: Driver for the ALI M1535D and M1543C FIR Controller
+ * Status: Experimental.
+ * Author: Benjamin Kong <benjamin_kong@ali.com.tw>
+ * Created at: 2000/10/16 03:46PM
+ * Modified at: 2001/1/3 02:55PM
+ * Modified by: Benjamin Kong <benjamin_kong@ali.com.tw>
+ * Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563
+ * Modified by: Clear Zhang <clear_zhang@ali.com.tw>
+ *
+ * Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/serial_reg.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "ali-ircc.h"
+
+#define CHIP_IO_EXTENT 8
+#define BROKEN_DONGLE_ID
+
+static char *driver_name = "ali-ircc";
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+
+/* Use BIOS settions by default, but user may supply module parameters */
+static unsigned int io[] = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0 };
+
+static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
+static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
+static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
+
+/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+ * is that M1543C doesn't support HP HDSL-3600
+ */
+static ali_chip_t chips[] =
+{
+ { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 },
+ { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 },
+ { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 },
+ { NULL }
+};
+
+/* Max 4 instances for now */
+static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+/* Dongle Types */
+static char *dongle_types[] = {
+ "TFDS6000",
+ "HP HSDL-3600",
+ "HP HSDL-1100",
+ "No dongle connected",
+};
+
+/* Some prototypes */
+static int ali_ircc_open(int i, chipio_t *info);
+
+static int ali_ircc_close(struct ali_ircc_cb *self);
+
+static int ali_ircc_setup(chipio_t *info);
+static int ali_ircc_is_receiving(struct ali_ircc_cb *self);
+static int ali_ircc_net_open(struct net_device *dev);
+static int ali_ircc_net_close(struct net_device *dev);
+static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
+static void ali_ircc_suspend(struct ali_ircc_cb *self);
+static void ali_ircc_wakeup(struct ali_ircc_cb *self);
+static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev);
+
+/* SIR function */
+static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
+static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
+static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
+static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
+static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
+
+/* FIR function */
+static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
+static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
+static int ali_ircc_dma_receive(struct ali_ircc_cb *self);
+static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
+static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
+static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
+
+/* My Function */
+static int ali_ircc_read_dongle_id (int i, chipio_t *info);
+static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
+
+/* ALi chip function */
+static void SIR2FIR(int iobase);
+static void FIR2SIR(int iobase);
+static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
+
+/*
+ * Function ali_ircc_init ()
+ *
+ * Initialize chip. Find out whay kinds of chips we are dealing with
+ * and their configuation registers address
+ */
+static int __init ali_ircc_init(void)
+{
+ ali_chip_t *chip;
+ chipio_t info;
+ int ret = -ENODEV;
+ int cfg, cfg_base;
+ int reg, revision;
+ int i = 0;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ /* Probe for all the ALi chipsets we know about */
+ for (chip= chips; chip->name; chip++, i++)
+ {
+ IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
+
+ /* Try all config registers for this chip */
+ for (cfg=0; cfg<2; cfg++)
+ {
+ cfg_base = chip->cfg[cfg];
+ if (!cfg_base)
+ continue;
+
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = io[i];
+ info.dma = dma[i];
+ info.irq = irq[i];
+
+
+ /* Enter Configuration */
+ outb(chip->entr1, cfg_base);
+ outb(chip->entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read Chip Identification Register */
+ outb(chip->cid_index, cfg_base);
+ reg = inb(cfg_base+1);
+
+ if (reg == chip->cid_value)
+ {
+ IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
+
+ outb(0x1F, cfg_base);
+ revision = inb(cfg_base+1);
+ IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
+ chip->name, revision);
+
+ /*
+ * If the user supplies the base address, then
+ * we init the chip, if not we probe the values
+ * set by the BIOS
+ */
+ if (io[i] < 2000)
+ {
+ chip->init(chip, &info);
+ }
+ else
+ {
+ chip->probe(chip, &info);
+ }
+
+ if (ali_ircc_open(i, &info) == 0)
+ ret = 0;
+ i++;
+ }
+ else
+ {
+ IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
+ }
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+ }
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+ return ret;
+}
+
+/*
+ * Function ali_ircc_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+static void __exit ali_ircc_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ pm_unregister_all(ali_ircc_pmproc);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ ali_ircc_close(dev_self[i]);
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+}
+
+/*
+ * Function ali_ircc_open (int i, chipio_t *inf)
+ *
+ * Open driver instance
+ *
+ */
+static int ali_ircc_open(int i, chipio_t *info)
+{
+ struct net_device *dev;
+ struct ali_ircc_cb *self;
+ struct pm_dev *pmdev;
+ int dongle_id;
+ int err;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ /* Set FIR FIFO and DMA Threshold */
+ if ((ali_ircc_setup(info)) == -1)
+ return -1;
+
+ dev = alloc_irdadev(sizeof(*self));
+ if (dev == NULL) {
+ IRDA_ERROR("%s(), can't allocate memory for control block!\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ self = dev->priv;
+ self->netdev = dev;
+ spin_lock_init(&self->lock);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->index = i;
+
+ /* Initialize IO */
+ self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */
+ self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */
+ self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */
+ self->io.irq = info->irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = info->dma;
+ self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */
+
+ /* Reserve the ioports that we need */
+ if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
+ IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
+ self->io.fir_base);
+ err = -ENODEV;
+ goto err_out1;
+ }
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* The only value we must override it the baudrate */
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384;
+ self->tx_buff.truesize = 14384;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out2;
+ }
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out3;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Tx queue info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+
+ /* Keep track of module usage */
+ SET_MODULE_OWNER(dev);
+
+ /* Override the network functions we need to use */
+ dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
+ dev->open = ali_ircc_net_open;
+ dev->stop = ali_ircc_net_close;
+ dev->do_ioctl = ali_ircc_net_ioctl;
+ dev->get_stats = ali_ircc_net_get_stats;
+
+ err = register_netdev(dev);
+ if (err) {
+ IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+ goto err_out4;
+ }
+ IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ /* Check dongle id */
+ dongle_id = ali_ircc_read_dongle_id(i, info);
+ IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__, driver_name, dongle_types[dongle_id]);
+
+ self->io.dongle_id = dongle_id;
+
+ pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ali_ircc_pmproc);
+ if (pmdev)
+ pmdev->data = self;
+
+ IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+
+ return 0;
+
+ err_out4:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ err_out3:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ err_out2:
+ release_region(self->io.fir_base, self->io.fir_ext);
+ err_out1:
+ dev_self[i] = NULL;
+ free_netdev(dev);
+ return err;
+}
+
+
+/*
+ * Function ali_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int __exit ali_ircc_close(struct ali_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+
+ dev_self[self->index] = NULL;
+ free_netdev(self->netdev);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_init_43 (chip, info)
+ *
+ * Initialize the ALi M1543 chip.
+ */
+static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
+{
+ /* All controller information like I/O address, DMA channel, IRQ
+ * are set by BIOS
+ */
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_init_53 (chip, info)
+ *
+ * Initialize the ALi M1535 chip.
+ */
+static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
+{
+ /* All controller information like I/O address, DMA channel, IRQ
+ * are set by BIOS
+ */
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_probe_53 (chip, info)
+ *
+ * Probes for the ALi M1535D or M1535
+ */
+static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int hi, low, reg;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ /* Enter Configuration */
+ outb(chip->entr1, cfg_base);
+ outb(chip->entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read address control register */
+ outb(0x60, cfg_base);
+ hi = inb(cfg_base+1);
+ outb(0x61, cfg_base);
+ low = inb(cfg_base+1);
+ info->fir_base = (hi<<8) + low;
+
+ info->sir_base = info->fir_base;
+
+ IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
+
+ /* Read IRQ control register */
+ outb(0x70, cfg_base);
+ reg = inb(cfg_base+1);
+ info->irq = reg & 0x0f;
+ IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+
+ /* Read DMA channel */
+ outb(0x74, cfg_base);
+ reg = inb(cfg_base+1);
+ info->dma = reg & 0x07;
+
+ if(info->dma == 0x04)
+ IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
+ else
+ IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+
+ /* Read Enabled Status */
+ outb(0x30, cfg_base);
+ reg = inb(cfg_base+1);
+ info->enabled = (reg & 0x80) && (reg & 0x01);
+ IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
+
+ /* Read Power Status */
+ outb(0x22, cfg_base);
+ reg = inb(cfg_base+1);
+ info->suspended = (reg & 0x20);
+ IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
+
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_setup (info)
+ *
+ * Set FIR FIFO and DMA Threshold
+ * Returns non-negative on success.
+ *
+ */
+static int ali_ircc_setup(chipio_t *info)
+{
+ unsigned char tmp;
+ int version;
+ int iobase = info->fir_base;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ /* Locking comments :
+ * Most operations here need to be protected. We are called before
+ * the device instance is created in ali_ircc_open(), therefore
+ * nobody can bother us - Jean II */
+
+ /* Switch to FIR space */
+ SIR2FIR(iobase);
+
+ /* Master Reset */
+ outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
+
+ /* Read FIR ID Version Register */
+ switch_bank(iobase, BANK3);
+ version = inb(iobase+FIR_ID_VR);
+
+ /* Should be 0x00 in the M1535/M1535D */
+ if(version != 0x00)
+ {
+ IRDA_ERROR("%s, Wrong chip version %02x\n", driver_name, version);
+ return -1;
+ }
+
+ // IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name, info->cfg_base);
+
+ /* Set FIR FIFO Threshold Register */
+ switch_bank(iobase, BANK1);
+ outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
+
+ /* Set FIR DMA Threshold Register */
+ outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* CRC enable */
+ switch_bank(iobase, BANK2);
+ outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
+
+ /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
+
+ /* Switch to Bank 0 */
+ switch_bank(iobase, BANK0);
+
+ tmp = inb(iobase+FIR_LCR_B);
+ tmp &=~0x20; // disable SIP
+ tmp |= 0x80; // these two steps make RX mode
+ tmp &= 0xbf;
+ outb(tmp, iobase+FIR_LCR_B);
+
+ /* Disable Interrupt */
+ outb(0x00, iobase+FIR_IER);
+
+
+ /* Switch to SIR space */
+ FIR2SIR(iobase);
+
+ IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n", driver_name);
+
+ /* Enable receive interrupts */
+ // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
+ // Turn on the interrupts in ali_ircc_net_open
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_read_dongle_id (int index, info)
+ *
+ * Try to read dongle indentification. This procedure needs to be executed
+ * once after power-on/reset. It also needs to be used whenever you suspect
+ * that the user may have plugged/unplugged the IrDA Dongle.
+ */
+static int ali_ircc_read_dongle_id (int i, chipio_t *info)
+{
+ int dongle_id, reg;
+ int cfg_base = info->cfg_base;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ /* Enter Configuration */
+ outb(chips[i].entr1, cfg_base);
+ outb(chips[i].entr2, cfg_base);
+
+ /* Select Logical Device 5 Registers (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base+1);
+
+ /* Read Dongle ID */
+ outb(0xf0, cfg_base);
+ reg = inb(cfg_base+1);
+ dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
+ IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__,
+ dongle_id, dongle_types[dongle_id]);
+
+ /* Exit configuration */
+ outb(0xbb, cfg_base);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+
+ return dongle_id;
+}
+
+/*
+ * Function ali_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct ali_ircc_cb *self;
+ int ret;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ if (!dev) {
+ IRDA_WARNING("%s: irq %d for unknown device.\n", driver_name, irq);
+ return IRQ_NONE;
+ }
+
+ self = (struct ali_ircc_cb *) dev->priv;
+
+ spin_lock(&self->lock);
+
+ /* Dispatch interrupt handler for the current speed */
+ if (self->io.speed > 115200)
+ ret = ali_ircc_fir_interrupt(self);
+ else
+ ret = ali_ircc_sir_interrupt(self);
+
+ spin_unlock(&self->lock);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+ return ret;
+}
+/*
+ * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self)
+ *
+ * Handle MIR/FIR interrupt
+ *
+ */
+static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
+{
+ __u8 eir, OldMessageCount;
+ int iobase, tmp;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK0);
+ self->InterruptID = inb(iobase+FIR_IIR);
+ self->BusStatus = inb(iobase+FIR_BSR);
+
+ OldMessageCount = (self->LineStatus + 1) & 0x07;
+ self->LineStatus = inb(iobase+FIR_LSR);
+ //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM
+ eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
+
+ IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
+ IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
+ IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
+ IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
+
+ /* Disable interrupts */
+ SetCOMInterrupts(self, FALSE);
+
+ /* Tx or Rx Interrupt */
+
+ if (eir & IIR_EOM)
+ {
+ if (self->io.direction == IO_XMIT) /* TX */
+ {
+ IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
+
+ if(ali_ircc_dma_xmit_complete(self))
+ {
+ if (irda_device_txqueue_empty(self->netdev))
+ {
+ /* Prepare for receive */
+ ali_ircc_dma_receive(self);
+ self->ier = IER_EOM;
+ }
+ }
+ else
+ {
+ self->ier = IER_EOM;
+ }
+
+ }
+ else /* RX */
+ {
+ IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
+
+ if(OldMessageCount > ((self->LineStatus+1) & 0x07))
+ {
+ self->rcvFramesOverflow = TRUE;
+ IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
+ }
+
+ if (ali_ircc_dma_receive_complete(self))
+ {
+ IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
+
+ self->ier = IER_EOM;
+ }
+ else
+ {
+ IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
+
+ self->ier = IER_EOM | IER_TIMER;
+ }
+
+ }
+ }
+ /* Timer Interrupt */
+ else if (eir & IIR_TIMER)
+ {
+ if(OldMessageCount > ((self->LineStatus+1) & 0x07))
+ {
+ self->rcvFramesOverflow = TRUE;
+ IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
+ }
+ /* Disable Timer */
+ switch_bank(iobase, BANK1);
+ tmp = inb(iobase+FIR_CR);
+ outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
+
+ /* Check if this is a Tx timer interrupt */
+ if (self->io.direction == IO_XMIT)
+ {
+ ali_ircc_dma_xmit(self);
+
+ /* Interrupt on EOM */
+ self->ier = IER_EOM;
+
+ }
+ else /* Rx */
+ {
+ if(ali_ircc_dma_receive_complete(self))
+ {
+ self->ier = IER_EOM;
+ }
+ else
+ {
+ self->ier = IER_EOM | IER_TIMER;
+ }
+ }
+ }
+
+ /* Restore Interrupt */
+ SetCOMInterrupts(self, TRUE);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
+ return IRQ_RETVAL(eir);
+}
+
+/*
+ * Function ali_ircc_sir_interrupt (irq, self, eir)
+ *
+ * Handle SIR interrupt
+ *
+ */
+static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
+{
+ int iobase;
+ int iir, lsr;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+
+ iobase = self->io.sir_base;
+
+ iir = inb(iobase+UART_IIR) & UART_IIR_ID;
+ if (iir) {
+ /* Clear interrupt */
+ lsr = inb(iobase+UART_LSR);
+
+ IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__,
+ iir, lsr, iobase);
+
+ switch (iir)
+ {
+ case UART_IIR_RLSI:
+ IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+ break;
+ case UART_IIR_RDI:
+ /* Receive interrupt */
+ ali_ircc_sir_receive(self);
+ break;
+ case UART_IIR_THRI:
+ if (lsr & UART_LSR_THRE)
+ {
+ /* Transmitter ready for data */
+ ali_ircc_sir_write_wakeup(self);
+ }
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
+ break;
+ }
+
+ }
+
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+
+ return IRQ_RETVAL(iir);
+}
+
+
+/*
+ * Function ali_ircc_sir_receive (self)
+ *
+ * Receive one frame from the infrared port
+ *
+ */
+static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
+{
+ int boguscount = 0;
+ int iobase;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /*
+ * Receive all characters in Rx FIFO, unwrap and unstuff them.
+ * async_unwrap_char will deliver all found frames
+ */
+ do {
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ inb(iobase+UART_RX));
+
+ /* Make sure we don't stay here too long */
+ if (boguscount++ > 32) {
+ IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
+ break;
+ }
+ } while (inb(iobase+UART_LSR) & UART_LSR_DR);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+/*
+ * Function ali_ircc_sir_write_wakeup (tty)
+ *
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ *
+ */
+static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
+{
+ int actual = 0;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ iobase = self->io.sir_base;
+
+ /* Finished with frame? */
+ if (self->tx_buff.len > 0)
+ {
+ /* Write data left in transmit buffer */
+ actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
+ self->tx_buff.data, self->tx_buff.len);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+ }
+ else
+ {
+ if (self->new_speed)
+ {
+ /* We must wait until all data are gone */
+ while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
+ IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
+
+ IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
+ ali_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+
+ // benjamin 2000/11/10 06:32PM
+ if (self->io.speed > 115200)
+ {
+ IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );
+
+ self->ier = IER_EOM;
+ // SetCOMInterrupts(self, TRUE);
+ return;
+ }
+ }
+ else
+ {
+ netif_wake_queue(self->netdev);
+ }
+
+ self->stats.tx_packets++;
+
+ /* Turn on receive interrupts */
+ outb(UART_IER_RDI, iobase+UART_IER);
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
+{
+ struct net_device *dev = self->netdev;
+ int iobase;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
+
+ /* This function *must* be called with irq off and spin-lock.
+ * - Jean II */
+
+ iobase = self->io.fir_base;
+
+ SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
+
+ /* Go to MIR, FIR Speed */
+ if (baud > 115200)
+ {
+
+
+ ali_ircc_fir_change_speed(self, baud);
+
+ /* Install FIR xmit handler*/
+ dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
+
+ /* Enable Interuupt */
+ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
+
+ /* Be ready for incomming frames */
+ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
+ }
+ /* Go to SIR Speed */
+ else
+ {
+ ali_ircc_sir_change_speed(self, baud);
+
+ /* Install SIR xmit handler*/
+ dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
+ }
+
+
+ SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM
+
+ netif_wake_queue(self->netdev);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
+{
+
+ int iobase;
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ struct net_device *dev;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ dev = self->netdev;
+ iobase = self->io.fir_base;
+
+ IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
+
+ /* Come from SIR speed */
+ if(self->io.speed <=115200)
+ {
+ SIR2FIR(iobase);
+ }
+
+ /* Update accounting for new speed */
+ self->io.speed = baud;
+
+ // Set Dongle Speed mode
+ ali_ircc_change_dongle_speed(self, baud);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+/*
+ * Function ali_sir_change_speed (self, speed)
+ *
+ * Set speed of IrDA port to specified baudrate
+ *
+ */
+static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ unsigned long flags;
+ int iobase;
+ int fcr; /* FIFO control reg */
+ int lcr; /* Line control reg */
+ int divisor;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /* Come from MIR or FIR speed */
+ if(self->io.speed >115200)
+ {
+ // Set Dongle Speed mode first
+ ali_ircc_change_dongle_speed(self, speed);
+
+ FIR2SIR(iobase);
+ }
+
+ // Clear Line and Auxiluary status registers 2000/11/24 11:47AM
+
+ inb(iobase+UART_LSR);
+ inb(iobase+UART_SCR);
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ divisor = 115200/speed;
+
+ fcr = UART_FCR_ENABLE_FIFO;
+
+ /*
+ * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
+ * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
+ * about this timeout since it will always be fast enough.
+ */
+ if (self->io.speed < 38400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ fcr |= UART_FCR_TRIGGER_14;
+
+ /* IrDA ports use 8N1 */
+ lcr = UART_LCR_WLEN8;
+
+ outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
+ outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
+ outb(divisor >> 8, iobase+UART_DLM);
+ outb(lcr, iobase+UART_LCR); /* Set 8N1 */
+ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
+
+ /* without this, the conection will be broken after come back from FIR speed,
+ but with this, the SIR connection is harder to established */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
+{
+
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
+ int iobase,dongle_id;
+ int tmp = 0;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */
+ dongle_id = self->io.dongle_id;
+
+ /* We are already locked, no need to do it again */
+
+ IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);
+
+ switch_bank(iobase, BANK2);
+ tmp = inb(iobase+FIR_IRDA_CR);
+
+ /* IBM type dongle */
+ if(dongle_id == 0)
+ {
+ if(speed == 4000000)
+ {
+ // __ __
+ // SD/MODE __| |__ __
+ // __ __
+ // IRTX __ __| |__
+ // T1 T2 T3 T4 T5
+
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ // T1 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T2 -> SD/MODE:1 IRTX:0
+ tmp &= ~0x01;
+ tmp |= 0x0a;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T3 -> SD/MODE:1 IRTX:1
+ tmp |= 0x0b;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T4 -> SD/MODE:0 IRTX:1
+ tmp &= ~0x08;
+ tmp |= 0x03;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T5 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // reset -> Normal TX output Signal
+ outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
+ }
+ else /* speed <=1152000 */
+ {
+ // __
+ // SD/MODE __| |__
+ //
+ // IRTX ________
+ // T1 T2 T3
+
+ /* MIR 115200, 57600 */
+ if (speed==1152000)
+ {
+ tmp |= 0xA0; //HDLC=1, 1.152Mbps=1
+ }
+ else
+ {
+ tmp &=~0x80; //HDLC 0.576Mbps
+ tmp |= 0x20; //HDLC=1,
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ /* MIR 115200, 57600 */
+
+ //switch_bank(iobase, BANK2);
+ // T1 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // T2 -> SD/MODE:1 IRTX:0
+ tmp &= ~0x01;
+ tmp |= 0x0a;
+ outb(tmp, iobase+FIR_IRDA_CR);
+
+ // T3 -> SD/MODE:0 IRTX:0
+ tmp &= ~0x09;
+ tmp |= 0x02;
+ outb(tmp, iobase+FIR_IRDA_CR);
+ udelay(2);
+
+ // reset -> Normal TX output Signal
+ outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
+ }
+ }
+ else if (dongle_id == 1) /* HP HDSL-3600 */
+ {
+ switch(speed)
+ {
+ case 4000000:
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ break;
+
+ case 1152000:
+ tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
+ break;
+
+ case 576000:
+ tmp &=~0x80; // HDLC 0.576Mbps
+ tmp |= 0x20; // HDLC=1,
+ break;
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ else /* HP HDSL-1100 */
+ {
+ if(speed <= 115200) /* SIR */
+ {
+
+ tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ else /* MIR FIR */
+ {
+
+ switch(speed)
+ {
+ case 4000000:
+ tmp &= ~IRDA_CR_HDLC; // HDLC=0
+ break;
+
+ case 1152000:
+ tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
+ break;
+
+ case 576000:
+ tmp &=~0x80; // HDLC 0.576Mbps
+ tmp |= 0x20; // HDLC=1,
+ break;
+ }
+
+ tmp |= IRDA_CR_CRC; // CRC=1
+ tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1
+
+ switch_bank(iobase, BANK2);
+ outb(tmp, iobase+FIR_IRDA_CR);
+ }
+ }
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+/*
+ * Function ali_ircc_sir_write (driver)
+ *
+ * Fill Tx FIFO with transmit data
+ *
+ */
+static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
+{
+ int actual = 0;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ /* Tx FIFO should be empty! */
+ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
+ IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
+ return 0;
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual], iobase+UART_TX);
+
+ actual++;
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+ return actual;
+}
+
+/*
+ * Function ali_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int ali_ircc_net_open(struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ int iobase;
+ char hwname[32];
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Request IRQ and install Interrupt Handler */
+ if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
+ {
+ IRDA_WARNING("%s, unable to allocate irq=%d\n", driver_name,
+ self->io.irq);
+ return -EAGAIN;
+ }
+
+ /*
+ * Always allocate the DMA channel after the IRQ, and clean up on
+ * failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ IRDA_WARNING("%s, unable to allocate dma=%d\n", driver_name,
+ self->io.dma);
+ free_irq(self->io.irq, self);
+ return -EAGAIN;
+ }
+
+ /* Turn on interrups */
+ outb(UART_IER_RDI , iobase+UART_IER);
+
+ /* Ready to play! */
+ netif_start_queue(dev); //benjamin by irport
+
+ /* Give self a hardware name */
+ sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int ali_ircc_net_close(struct net_device *dev)
+{
+
+ struct ali_ircc_cb *self;
+ //int iobase;
+
+ IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ disable_dma(self->io.dma);
+
+ /* Disable interrupts */
+ SetCOMInterrupts(self, FALSE);
+
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return 0;
+}
+
+/*
+ * Function ali_ircc_fir_hard_xmit (skb, dev)
+ *
+ * Transmit the frame
+ *
+ */
+static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __u32 speed;
+ int mtt, diff;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Note : you should make sure that speed changes are not going
+ * to corrupt any outgoing frame. Look at nsc-ircc for the gory
+ * details - Jean II */
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ ali_ircc_change_speed(self, speed);
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Register and copy this frame to DMA memory */
+ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+ self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+ self->tx_fifo.tail += skb->len;
+
+ self->stats.tx_bytes += skb->len;
+
+ memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
+ skb->len);
+
+ self->tx_fifo.len++;
+ self->tx_fifo.free++;
+
+ /* Start transmit only if there is currently no transmit going on */
+ if (self->tx_fifo.len == 1)
+ {
+ /* Check if we must wait the min turn time or not */
+ mtt = irda_get_mtt(skb);
+
+ if (mtt)
+ {
+ /* Check how much time we have used already */
+ do_gettimeofday(&self->now);
+
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+ /* self->stamp is set from ali_ircc_dma_receive_complete() */
+
+ IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);
+
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff)
+ {
+ mtt -= diff;
+
+ /*
+ * Use timer if delay larger than 1000 us, and
+ * use udelay for smaller values which should
+ * be acceptable
+ */
+ if (mtt > 500)
+ {
+ /* Adjust for timer resolution */
+ mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */
+
+ IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);
+
+ /* Setup timer */
+ if (mtt == 1) /* 500 us */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR);
+ }
+ else if (mtt == 2) /* 1 ms */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR);
+ }
+ else /* > 2ms -> 4ms */
+ {
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR);
+ }
+
+
+ /* Start timer */
+ outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
+ self->io.direction = IO_XMIT;
+
+ /* Enable timer interrupt */
+ self->ier = IER_TIMER;
+ SetCOMInterrupts(self, TRUE);
+
+ /* Timer will take care of the rest */
+ goto out;
+ }
+ else
+ udelay(mtt);
+ } // if (if (mtt > diff)
+ }// if (mtt)
+
+ /* Enable EOM interrupt */
+ self->ier = IER_EOM;
+ SetCOMInterrupts(self, TRUE);
+
+ /* Transmit frame */
+ ali_ircc_dma_xmit(self);
+ } // if (self->tx_fifo.len == 1)
+
+ out:
+
+ /* Not busy transmitting anymore if window is not full */
+ if (self->tx_fifo.free < MAX_TX_WINDOW)
+ netif_wake_queue(self->netdev);
+
+ /* Restore bank register */
+ switch_bank(iobase, BANK0);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+ return 0;
+}
+
+
+static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
+{
+ int iobase, tmp;
+ unsigned char FIFO_OPTI, Hi, Lo;
+
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ iobase = self->io.fir_base;
+
+ /* FIFO threshold , this method comes from NDIS5 code */
+
+ if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
+ FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
+ else
+ FIFO_OPTI = TX_FIFO_Threshold;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ self->io.direction = IO_XMIT;
+
+ irda_setup_dma(self->io.dma,
+ ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
+ self->tx_buff.head) + self->tx_buff_dma,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ DMA_TX_MODE);
+
+ /* Reset Tx FIFO */
+ switch_bank(iobase, BANK0);
+ outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
+
+ /* Set Tx FIFO threshold */
+ if (self->fifo_opti_buf!=FIFO_OPTI)
+ {
+ switch_bank(iobase, BANK1);
+ outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
+ self->fifo_opti_buf=FIFO_OPTI;
+ }
+
+ /* Set Tx DMA threshold */
+ switch_bank(iobase, BANK1);
+ outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* Set max Tx frame size */
+ Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
+ Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
+ switch_bank(iobase, BANK2);
+ outb(Hi, iobase+FIR_TX_DSR_HI);
+ outb(Lo, iobase+FIR_TX_DSR_LO);
+
+ /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */
+ switch_bank(iobase, BANK0);
+ tmp = inb(iobase+FIR_LCR_B);
+ tmp &= ~0x20; // Disable SIP
+ outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
+ IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+
+ outb(0, iobase+FIR_LSR);
+
+ /* Enable DMA and Burst Mode */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
+{
+ int iobase;
+ int ret = TRUE;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ iobase = self->io.fir_base;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ /* Check for underrun! */
+ switch_bank(iobase, BANK0);
+ if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
+
+ {
+ IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+ }
+ else
+ {
+ self->stats.tx_packets++;
+ }
+
+ /* Check if we need to change the speed */
+ if (self->new_speed)
+ {
+ ali_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ /* Finished with this frame, so prepare for next */
+ self->tx_fifo.ptr++;
+ self->tx_fifo.len--;
+
+ /* Any frames to be sent back-to-back? */
+ if (self->tx_fifo.len)
+ {
+ ali_ircc_dma_xmit(self);
+
+ /* Not finished yet! */
+ ret = FALSE;
+ }
+ else
+ { /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+ }
+
+ /* Make sure we have room for more frames */
+ if (self->tx_fifo.free < MAX_TX_WINDOW) {
+ /* Not busy transmitting anymore */
+ /* Tell the network layer, that we can accept more frames */
+ netif_wake_queue(self->netdev);
+ }
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+ return ret;
+}
+
+/*
+ * Function ali_ircc_dma_receive (self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
+{
+ int iobase, tmp;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ iobase = self->io.fir_base;
+
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK1);
+ outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
+
+ /* Reset Message Count */
+ switch_bank(iobase, BANK0);
+ outb(0x07, iobase+FIR_LSR);
+
+ self->rcvFramesOverflow = FALSE;
+
+ self->LineStatus = inb(iobase+FIR_LSR) ;
+
+ /* Reset Rx FIFO info */
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Rx FIFO */
+ // switch_bank(iobase, BANK0);
+ outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
+
+ self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+ self->st_fifo.tail = self->st_fifo.head = 0;
+
+ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+ DMA_RX_MODE);
+
+ /* Set Receive Mode,Brick Wall */
+ //switch_bank(iobase, BANK0);
+ tmp = inb(iobase+FIR_LCR_B);
+ outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
+ IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+
+ /* Set Rx Threshold */
+ switch_bank(iobase, BANK1);
+ outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
+ outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
+
+ /* Enable DMA and Burst Mode */
+ // switch_bank(iobase, BANK1);
+ outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
+
+ switch_bank(iobase, BANK0);
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+ return 0;
+}
+
+static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ __u8 status, MessageCount;
+ int len, i, iobase, val;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ st_fifo = &self->st_fifo;
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK0);
+ MessageCount = inb(iobase+ FIR_LSR)&0x07;
+
+ if (MessageCount > 0)
+ IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);
+
+ for (i=0; i<=MessageCount; i++)
+ {
+ /* Bank 0 */
+ switch_bank(iobase, BANK0);
+ status = inb(iobase+FIR_LSR);
+
+ switch_bank(iobase, BANK2);
+ len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
+ len = len << 8;
+ len |= inb(iobase+FIR_RX_DSR_LO);
+
+ IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);
+ IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
+
+ if (st_fifo->tail >= MAX_RX_WINDOW) {
+ IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
+ continue;
+ }
+
+ st_fifo->entries[st_fifo->tail].status = status;
+ st_fifo->entries[st_fifo->tail].len = len;
+ st_fifo->pending_bytes += len;
+ st_fifo->tail++;
+ st_fifo->len++;
+ }
+
+ for (i=0; i<=MessageCount; i++)
+ {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->pending_bytes -= len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ /* Check for errors */
+ if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
+ {
+ IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );
+
+ /* Skip frame */
+ self->stats.rx_errors++;
+
+ self->rx_buff.data += len;
+
+ if (status & LSR_FIFO_UR)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
+ }
+ if (status & LSR_FRAME_ERROR)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
+ }
+
+ if (status & LSR_CRC_ERROR)
+ {
+ self->stats.rx_crc_errors++;
+ IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
+ }
+
+ if(self->rcvFramesOverflow)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );
+ }
+ if(len == 0)
+ {
+ self->stats.rx_frame_errors++;
+ IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
+ }
+ }
+ else
+ {
+
+ if (st_fifo->pending_bytes < 32)
+ {
+ switch_bank(iobase, BANK0);
+ val = inb(iobase+FIR_BSR);
+ if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
+ {
+ IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
+
+ /* Put this entry back in fifo */
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->pending_bytes += len;
+ st_fifo->entries[st_fifo->head].status = status;
+ st_fifo->entries[st_fifo->head].len = len;
+
+ /*
+ * DMA not finished yet, so try again
+ * later, set timer value, resolution
+ * 500 us
+ */
+
+ switch_bank(iobase, BANK1);
+ outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM
+
+ /* Enable Timer */
+ outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
+
+ return FALSE; /* I'll be back! */
+ }
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ do_gettimeofday(&self->stamp);
+
+ skb = dev_alloc_skb(len+1);
+ if (skb == NULL)
+ {
+ IRDA_WARNING("%s(), memory squeeze, "
+ "dropping frame.\n",
+ __FUNCTION__);
+ self->stats.rx_dropped++;
+
+ return FALSE;
+ }
+
+ /* Make sure IP header gets aligned */
+ skb_reserve(skb, 1);
+
+ /* Copy frame without CRC, CRC is removed by hardware*/
+ skb_put(skb, len);
+ memcpy(skb->data, self->rx_buff.data, len);
+
+ /* Move to next frame */
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ self->netdev->last_rx = jiffies;
+ }
+ }
+
+ switch_bank(iobase, BANK0);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+ return TRUE;
+}
+
+
+
+/*
+ * Function ali_ircc_sir_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __u32 speed;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return 0;);
+
+ self = (struct ali_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.sir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Note : you should make sure that speed changes are not going
+ * to corrupt any outgoing frame. Look at nsc-ircc for the gory
+ * details - Jean II */
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ ali_ircc_change_speed(self, speed);
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Init tx buffer */
+ self->tx_buff.data = self->tx_buff.head;
+
+ /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* Turn on transmit finished interrupt. Will fire immediately! */
+ outb(UART_IER_THRI, iobase+UART_IER);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return 0;
+}
+
+
+/*
+ * Function ali_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct ali_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
+ /*
+ * This function will also be used by IrLAP to change the
+ * speed, so we still must allow for speed change within
+ * interrupt context.
+ */
+ if (!in_interrupt() && !capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ spin_lock_irqsave(&self->lock, flags);
+ ali_ircc_change_speed(self, irq->ifr_baudrate);
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
+ /* This is protected */
+ irq->ifr_receiving = ali_ircc_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return ret;
+}
+
+/*
+ * Function ali_ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
+{
+ unsigned long flags;
+ int status = FALSE;
+ int iobase;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ if (self->io.speed > 115200)
+ {
+ iobase = self->io.fir_base;
+
+ switch_bank(iobase, BANK1);
+ if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
+ {
+ /* We are receiving something */
+ IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
+ status = TRUE;
+ }
+ switch_bank(iobase, BANK0);
+ }
+ else
+ {
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+ }
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return status;
+}
+
+static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return &self->stats;
+}
+
+static void ali_ircc_suspend(struct ali_ircc_cb *self)
+{
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ IRDA_MESSAGE("%s, Suspending\n", driver_name);
+
+ if (self->io.suspended)
+ return;
+
+ ali_ircc_net_close(self->netdev);
+
+ self->io.suspended = 1;
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void ali_ircc_wakeup(struct ali_ircc_cb *self)
+{
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ if (!self->io.suspended)
+ return;
+
+ ali_ircc_net_open(self->netdev);
+
+ IRDA_MESSAGE("%s, Waking up\n", driver_name);
+
+ self->io.suspended = 0;
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+ struct ali_ircc_cb *self = (struct ali_ircc_cb*) dev->data;
+
+ IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ if (self) {
+ switch (rqst) {
+ case PM_SUSPEND:
+ ali_ircc_suspend(self);
+ break;
+ case PM_RESUME:
+ ali_ircc_wakeup(self);
+ break;
+ }
+ }
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+
+ return 0;
+}
+
+
+/* ALi Chip Function */
+
+static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
+{
+
+ unsigned char newMask;
+
+ int iobase = self->io.fir_base; /* or sir_base */
+
+ IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);
+
+ /* Enable the interrupt which we wish to */
+ if (enable){
+ if (self->io.direction == IO_XMIT)
+ {
+ if (self->io.speed > 115200) /* FIR, MIR */
+ {
+ newMask = self->ier;
+ }
+ else /* SIR */
+ {
+ newMask = UART_IER_THRI | UART_IER_RDI;
+ }
+ }
+ else {
+ if (self->io.speed > 115200) /* FIR, MIR */
+ {
+ newMask = self->ier;
+ }
+ else /* SIR */
+ {
+ newMask = UART_IER_RDI;
+ }
+ }
+ }
+ else /* Disable all the interrupts */
+ {
+ newMask = 0x00;
+
+ }
+
+ //SIR and FIR has different registers
+ if (self->io.speed > 115200)
+ {
+ switch_bank(iobase, BANK0);
+ outb(newMask, iobase+FIR_IER);
+ }
+ else
+ outb(newMask, iobase+UART_IER);
+
+ IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void SIR2FIR(int iobase)
+{
+ //unsigned char tmp;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ /* Already protected (change_speed() or setup()), no need to lock.
+ * Jean II */
+
+ outb(0x28, iobase+UART_MCR);
+ outb(0x68, iobase+UART_MCR);
+ outb(0x88, iobase+UART_MCR);
+
+ outb(0x60, iobase+FIR_MCR); /* Master Reset */
+ outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */
+
+ //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */
+ //tmp |= 0x20;
+ //outb(tmp, iobase+FIR_LCR_B);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+static void FIR2SIR(int iobase)
+{
+ unsigned char val;
+
+ IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+
+ /* Already protected (change_speed() or setup()), no need to lock.
+ * Jean II */
+
+ outb(0x20, iobase+FIR_MCR); /* IRQ to low */
+ outb(0x00, iobase+UART_IER);
+
+ outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */
+ outb(0x00, iobase+UART_FCR);
+ outb(0x07, iobase+UART_FCR);
+
+ val = inb(iobase+UART_RX);
+ val = inb(iobase+UART_LSR);
+ val = inb(iobase+UART_MSR);
+
+ IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+}
+
+MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
+MODULE_DESCRIPTION("ALi FIR Controller Driver");
+MODULE_LICENSE("GPL");
+
+
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "Base I/O addresses");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ lines");
+module_param_array(dma, int, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channels");
+
+module_init(ali_ircc_init);
+module_exit(ali_ircc_cleanup);
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
new file mode 100644
index 000000000000..e489c6661ee8
--- /dev/null
+++ b/drivers/net/irda/ali-ircc.h
@@ -0,0 +1,231 @@
+/*********************************************************************
+ *
+ * Filename: ali-ircc.h
+ * Version: 0.5
+ * Description: Driver for the ALI M1535D and M1543C FIR Controller
+ * Status: Experimental.
+ * Author: Benjamin Kong <benjamin_kong@ali.com.tw>
+ * Created at: 2000/10/16 03:46PM
+ * Modified at: 2001/1/3 02:56PM
+ * Modified by: Benjamin Kong <benjamin_kong@ali.com.tw>
+ *
+ * Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef ALI_IRCC_H
+#define ALI_IRCC_H
+
+#include <linux/time.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+/* SIR Register */
+/* Usr definition of linux/serial_reg.h */
+
+/* FIR Register */
+#define BANK0 0x20
+#define BANK1 0x21
+#define BANK2 0x22
+#define BANK3 0x23
+
+#define FIR_MCR 0x07 /* Master Control Register */
+
+/* Bank 0 */
+#define FIR_DR 0x00 /* Alias 0, FIR Data Register (R/W) */
+#define FIR_IER 0x01 /* Alias 1, FIR Interrupt Enable Register (R/W) */
+#define FIR_IIR 0x02 /* Alias 2, FIR Interrupt Identification Register (Read only) */
+#define FIR_LCR_A 0x03 /* Alias 3, FIR Line Control Register A (R/W) */
+#define FIR_LCR_B 0x04 /* Alias 4, FIR Line Control Register B (R/W) */
+#define FIR_LSR 0x05 /* Alias 5, FIR Line Status Register (R/W) */
+#define FIR_BSR 0x06 /* Alias 6, FIR Bus Status Register (Read only) */
+
+
+ /* Alias 1 */
+ #define IER_FIFO 0x10 /* FIR FIFO Interrupt Enable */
+ #define IER_TIMER 0x20 /* Timer Interrupt Enable */
+ #define IER_EOM 0x40 /* End of Message Interrupt Enable */
+ #define IER_ACT 0x80 /* Active Frame Interrupt Enable */
+
+ /* Alias 2 */
+ #define IIR_FIFO 0x10 /* FIR FIFO Interrupt */
+ #define IIR_TIMER 0x20 /* Timer Interrupt */
+ #define IIR_EOM 0x40 /* End of Message Interrupt */
+ #define IIR_ACT 0x80 /* Active Frame Interrupt */
+
+ /* Alias 3 */
+ #define LCR_A_FIFO_RESET 0x80 /* FIFO Reset */
+
+ /* Alias 4 */
+ #define LCR_B_BW 0x10 /* Brick Wall */
+ #define LCR_B_SIP 0x20 /* SIP Enable */
+ #define LCR_B_TX_MODE 0x40 /* Transmit Mode */
+ #define LCR_B_RX_MODE 0x80 /* Receive Mode */
+
+ /* Alias 5 */
+ #define LSR_FIR_LSA 0x00 /* FIR Line Status Address */
+ #define LSR_FRAME_ABORT 0x08 /* Frame Abort */
+ #define LSR_CRC_ERROR 0x10 /* CRC Error */
+ #define LSR_SIZE_ERROR 0x20 /* Size Error */
+ #define LSR_FRAME_ERROR 0x40 /* Frame Error */
+ #define LSR_FIFO_UR 0x80 /* FIFO Underrun */
+ #define LSR_FIFO_OR 0x80 /* FIFO Overrun */
+
+ /* Alias 6 */
+ #define BSR_FIFO_NOT_EMPTY 0x80 /* FIFO Not Empty */
+
+/* Bank 1 */
+#define FIR_CR 0x00 /* Alias 0, FIR Configuration Register (R/W) */
+#define FIR_FIFO_TR 0x01 /* Alias 1, FIR FIFO Threshold Register (R/W) */
+#define FIR_DMA_TR 0x02 /* Alias 2, FIR DMA Threshold Register (R/W) */
+#define FIR_TIMER_IIR 0x03 /* Alias 3, FIR Timer interrupt interval register (W/O) */
+#define FIR_FIFO_FR 0x03 /* Alias 3, FIR FIFO Flag register (R/O) */
+#define FIR_FIFO_RAR 0x04 /* Alias 4, FIR FIFO Read Address register (R/O) */
+#define FIR_FIFO_WAR 0x05 /* Alias 5, FIR FIFO Write Address register (R/O) */
+#define FIR_TR 0x06 /* Alias 6, Test REgister (W/O) */
+
+ /* Alias 0 */
+ #define CR_DMA_EN 0x01 /* DMA Enable */
+ #define CR_DMA_BURST 0x02 /* DMA Burst Mode */
+ #define CR_TIMER_EN 0x08 /* Timer Enable */
+
+ /* Alias 3 */
+ #define TIMER_IIR_500 0x00 /* 500 us */
+ #define TIMER_IIR_1ms 0x01 /* 1 ms */
+ #define TIMER_IIR_2ms 0x02 /* 2 ms */
+ #define TIMER_IIR_4ms 0x03 /* 4 ms */
+
+/* Bank 2 */
+#define FIR_IRDA_CR 0x00 /* Alias 0, IrDA Control Register (R/W) */
+#define FIR_BOF_CR 0x01 /* Alias 1, BOF Count Register (R/W) */
+#define FIR_BW_CR 0x02 /* Alias 2, Brick Wall Count Register (R/W) */
+#define FIR_TX_DSR_HI 0x03 /* Alias 3, TX Data Size Register (high) (R/W) */
+#define FIR_TX_DSR_LO 0x04 /* Alias 4, TX Data Size Register (low) (R/W) */
+#define FIR_RX_DSR_HI 0x05 /* Alias 5, RX Data Size Register (high) (R/W) */
+#define FIR_RX_DSR_LO 0x06 /* Alias 6, RX Data Size Register (low) (R/W) */
+
+ /* Alias 0 */
+ #define IRDA_CR_HDLC1152 0x80 /* 1.152Mbps HDLC Select */
+ #define IRDA_CR_CRC 0X40 /* CRC Select. */
+ #define IRDA_CR_HDLC 0x20 /* HDLC select. */
+ #define IRDA_CR_HP_MODE 0x10 /* HP mode (read only) */
+ #define IRDA_CR_SD_ST 0x08 /* SD/MODE State. */
+ #define IRDA_CR_FIR_SIN 0x04 /* FIR SIN Select. */
+ #define IRDA_CR_ITTX_0 0x02 /* SOUT State. IRTX force to 0 */
+ #define IRDA_CR_ITTX_1 0x03 /* SOUT State. IRTX force to 1 */
+
+/* Bank 3 */
+#define FIR_ID_VR 0x00 /* Alias 0, FIR ID Version Register (R/O) */
+#define FIR_MODULE_CR 0x01 /* Alias 1, FIR Module Control Register (R/W) */
+#define FIR_IO_BASE_HI 0x02 /* Alias 2, FIR Higher I/O Base Address Register (R/O) */
+#define FIR_IO_BASE_LO 0x03 /* Alias 3, FIR Lower I/O Base Address Register (R/O) */
+#define FIR_IRQ_CR 0x04 /* Alias 4, FIR IRQ Channel Register (R/O) */
+#define FIR_DMA_CR 0x05 /* Alias 5, FIR DMA Channel Register (R/O) */
+
+struct ali_chip {
+ char *name;
+ int cfg[2];
+ unsigned char entr1;
+ unsigned char entr2;
+ unsigned char cid_index;
+ unsigned char cid_value;
+ int (*probe)(struct ali_chip *chip, chipio_t *info);
+ int (*init)(struct ali_chip *chip, chipio_t *info);
+};
+typedef struct ali_chip ali_chip_t;
+
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+#define TX_FIFO_Threshold 8
+#define RX_FIFO_Threshold 1
+#define TX_DMA_Threshold 1
+#define RX_DMA_Threshold 1
+
+/* For storing entries in the status FIFO */
+
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Lenght of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Lenght of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+/* Private data for each instance */
+struct ali_ircc_cb {
+
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ __u8 ier; /* Interrupt enable register */
+
+ __u8 InterruptID; /* Interrupt ID */
+ __u8 BusStatus; /* Bus Status */
+ __u8 LineStatus; /* Line Status */
+
+ unsigned char rcvFramesOverflow;
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ unsigned char fifo_opti_buf;
+
+ struct pm_dev *dev;
+};
+
+static inline void switch_bank(int iobase, int bank)
+{
+ outb(bank, iobase+FIR_MCR);
+}
+
+#endif /* ALI_IRCC_H */
diff --git a/drivers/net/irda/au1000_ircc.h b/drivers/net/irda/au1000_ircc.h
new file mode 100644
index 000000000000..7a31d4659ed6
--- /dev/null
+++ b/drivers/net/irda/au1000_ircc.h
@@ -0,0 +1,127 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Au1000 IrDA driver.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef AU1000_IRCC_H
+#define AU1000_IRCC_H
+
+#include <linux/time.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+#define NUM_IR_IFF 1
+#define NUM_IR_DESC 64
+#define RING_SIZE_4 0x0
+#define RING_SIZE_16 0x3
+#define RING_SIZE_64 0xF
+#define MAX_NUM_IR_DESC 64
+#define MAX_BUF_SIZE 2048
+
+#define BPS_115200 0
+#define BPS_57600 1
+#define BPS_38400 2
+#define BPS_19200 5
+#define BPS_9600 11
+#define BPS_2400 47
+
+/* Ring descriptor flags */
+#define AU_OWN (1<<7) /* tx,rx */
+
+#define IR_DIS_CRC (1<<6) /* tx */
+#define IR_BAD_CRC (1<<5) /* tx */
+#define IR_NEED_PULSE (1<<4) /* tx */
+#define IR_FORCE_UNDER (1<<3) /* tx */
+#define IR_DISABLE_TX (1<<2) /* tx */
+#define IR_HW_UNDER (1<<0) /* tx */
+#define IR_TX_ERROR (IR_DIS_CRC|IR_BAD_CRC|IR_HW_UNDER)
+
+#define IR_PHY_ERROR (1<<6) /* rx */
+#define IR_CRC_ERROR (1<<5) /* rx */
+#define IR_MAX_LEN (1<<4) /* rx */
+#define IR_FIFO_OVER (1<<3) /* rx */
+#define IR_SIR_ERROR (1<<2) /* rx */
+#define IR_RX_ERROR (IR_PHY_ERROR|IR_CRC_ERROR| \
+ IR_MAX_LEN|IR_FIFO_OVER|IR_SIR_ERROR)
+
+typedef struct db_dest {
+ struct db_dest *pnext;
+ volatile u32 *vaddr;
+ dma_addr_t dma_addr;
+} db_dest_t;
+
+
+typedef struct ring_desc {
+ u8 count_0; /* 7:0 */
+ u8 count_1; /* 12:8 */
+ u8 reserved;
+ u8 flags;
+ u8 addr_0; /* 7:0 */
+ u8 addr_1; /* 15:8 */
+ u8 addr_2; /* 23:16 */
+ u8 addr_3; /* 31:24 */
+} ring_dest_t;
+
+
+/* Private data for each instance */
+struct au1k_private {
+
+ db_dest_t *pDBfree;
+ db_dest_t db[2*NUM_IR_DESC];
+ volatile ring_dest_t *rx_ring[NUM_IR_DESC];
+ volatile ring_dest_t *tx_ring[NUM_IR_DESC];
+ db_dest_t *rx_db_inuse[NUM_IR_DESC];
+ db_dest_t *tx_db_inuse[NUM_IR_DESC];
+ u32 rx_head;
+ u32 tx_head;
+ u32 tx_tail;
+ u32 tx_full;
+
+ iobuff_t rx_buff;
+
+ struct net_device *netdev;
+ struct net_device_stats stats;
+
+ struct timeval stamp;
+ struct timeval now;
+ struct qos_info qos;
+ struct irlap_cb *irlap;
+
+ u8 open;
+ u32 speed;
+ u32 newspeed;
+
+ u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */
+ struct timer_list timer;
+
+ spinlock_t lock; /* For serializing operations */
+ struct pm_dev *dev;
+};
+#endif /* AU1000_IRCC_H */
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
new file mode 100644
index 000000000000..e6b1985767c2
--- /dev/null
+++ b/drivers/net/irda/au1k_ir.c
@@ -0,0 +1,851 @@
+/*
+ * Alchemy Semi Au1000 IrDA driver
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/au1000.h>
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100)
+#include <asm/pb1000.h>
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+#include <asm/db1x00.h>
+#else
+#error au1k_ir: unsupported board
+#endif
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+#include "au1000_ircc.h"
+
+static int au1k_irda_net_init(struct net_device *);
+static int au1k_irda_start(struct net_device *);
+static int au1k_irda_stop(struct net_device *dev);
+static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *);
+static int au1k_irda_rx(struct net_device *);
+static void au1k_irda_interrupt(int, void *, struct pt_regs *);
+static void au1k_tx_timeout(struct net_device *);
+static struct net_device_stats *au1k_irda_stats(struct net_device *);
+static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int);
+static int au1k_irda_set_speed(struct net_device *dev, int speed);
+
+static void *dma_alloc(size_t, dma_addr_t *);
+static void dma_free(void *, size_t);
+
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+static struct net_device *ir_devs[NUM_IR_IFF];
+static char version[] __devinitdata =
+ "au1k_ircc:1.2 ppopov@mvista.com\n";
+
+#define RUN_AT(x) (jiffies + (x))
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+static BCSR * const bcsr = (BCSR *)0xAE000000;
+#endif
+
+static DEFINE_SPINLOCK(ir_lock);
+
+/*
+ * IrDA peripheral bug. You have to read the register
+ * twice to get the right value.
+ */
+u32 read_ir_reg(u32 addr)
+{
+ readl(addr);
+ return readl(addr);
+}
+
+
+/*
+ * Buffer allocation/deallocation routines. The buffer descriptor returned
+ * has the virtual and dma address of a buffer suitable for
+ * both, receive and transmit operations.
+ */
+static db_dest_t *GetFreeDB(struct au1k_private *aup)
+{
+ db_dest_t *pDB;
+ pDB = aup->pDBfree;
+
+ if (pDB) {
+ aup->pDBfree = pDB->pnext;
+ }
+ return pDB;
+}
+
+static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB)
+{
+ db_dest_t *pDBfree = aup->pDBfree;
+ if (pDBfree)
+ pDBfree->pnext = pDB;
+ aup->pDBfree = pDB;
+}
+
+
+/*
+ DMA memory allocation, derived from pci_alloc_consistent.
+ However, the Au1000 data cache is coherent (when programmed
+ so), therefore we return KSEG0 address, not KSEG1.
+*/
+static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
+{
+ void *ret;
+ int gfp = GFP_ATOMIC | GFP_DMA;
+
+ ret = (void *) __get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_bus(ret);
+ ret = (void *)KSEG0ADDR(ret);
+ }
+ return ret;
+}
+
+
+static void dma_free(void *vaddr, size_t size)
+{
+ vaddr = (void *)KSEG0ADDR(vaddr);
+ free_pages((unsigned long) vaddr, get_order(size));
+}
+
+
+static void
+setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
+{
+ int i;
+ for (i=0; i<NUM_IR_DESC; i++) {
+ aup->rx_ring[i] = (volatile ring_dest_t *)
+ (rx_base + sizeof(ring_dest_t)*i);
+ }
+ for (i=0; i<NUM_IR_DESC; i++) {
+ aup->tx_ring[i] = (volatile ring_dest_t *)
+ (tx_base + sizeof(ring_dest_t)*i);
+ }
+}
+
+static int au1k_irda_init(void)
+{
+ static unsigned version_printed = 0;
+ struct au1k_private *aup;
+ struct net_device *dev;
+ int err;
+
+ if (version_printed++ == 0) printk(version);
+
+ dev = alloc_irdadev(sizeof(struct au1k_private));
+ if (!dev)
+ return -ENOMEM;
+
+ dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */
+ err = au1k_irda_net_init(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ ir_devs[0] = dev;
+ printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
+ return 0;
+
+out1:
+ aup = netdev_priv(dev);
+ dma_free((void *)aup->db[0].vaddr,
+ MAX_BUF_SIZE * 2*NUM_IR_DESC);
+ dma_free((void *)aup->rx_ring[0],
+ 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
+ kfree(aup->rx_buff.head);
+out:
+ free_netdev(dev);
+ return err;
+}
+
+static int au1k_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int au1k_irda_net_init(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ int i, retval = 0, err;
+ db_dest_t *pDB, *pDBfree;
+ dma_addr_t temp;
+
+ err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
+ if (err)
+ goto out1;
+
+ dev->open = au1k_irda_start;
+ dev->hard_start_xmit = au1k_irda_hard_xmit;
+ dev->stop = au1k_irda_stop;
+ dev->get_stats = au1k_irda_stats;
+ dev->do_ioctl = au1k_irda_ioctl;
+ dev->tx_timeout = au1k_tx_timeout;
+
+ irda_init_max_qos_capabilies(&aup->qos);
+
+ /* The only value we must override it the baudrate */
+ aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000 |(IR_4000000 << 8);
+
+ aup->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&aup->qos);
+
+ retval = -ENOMEM;
+
+ /* Tx ring follows rx ring + 512 bytes */
+ /* we need a 1k aligned buffer */
+ aup->rx_ring[0] = (ring_dest_t *)
+ dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp);
+ if (!aup->rx_ring[0])
+ goto out2;
+
+ /* allocate the data buffers */
+ aup->db[0].vaddr =
+ (void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp);
+ if (!aup->db[0].vaddr)
+ goto out3;
+
+ setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
+
+ pDBfree = NULL;
+ pDB = aup->db;
+ for (i=0; i<(2*NUM_IR_DESC); i++) {
+ pDB->pnext = pDBfree;
+ pDBfree = pDB;
+ pDB->vaddr =
+ (u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i);
+ pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
+ pDB++;
+ }
+ aup->pDBfree = pDBfree;
+
+ /* attach a data buffer to each descriptor */
+ for (i=0; i<NUM_IR_DESC; i++) {
+ pDB = GetFreeDB(aup);
+ if (!pDB) goto out;
+ aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+ aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
+ aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
+ aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
+ aup->rx_db_inuse[i] = pDB;
+ }
+ for (i=0; i<NUM_IR_DESC; i++) {
+ pDB = GetFreeDB(aup);
+ if (!pDB) goto out;
+ aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+ aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
+ aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
+ aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
+ aup->tx_ring[i]->count_0 = 0;
+ aup->tx_ring[i]->count_1 = 0;
+ aup->tx_ring[i]->flags = 0;
+ aup->tx_db_inuse[i] = pDB;
+ }
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+ /* power on */
+ bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
+ au_sync();
+#endif
+
+ return 0;
+
+out3:
+ dma_free((void *)aup->rx_ring[0],
+ 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
+out2:
+ kfree(aup->rx_buff.head);
+out1:
+ printk(KERN_ERR "au1k_init_module failed. Returns %d\n", retval);
+ return retval;
+}
+
+
+static int au1k_init(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ int i;
+ u32 control;
+ u32 ring_address;
+
+ /* bring the device out of reset */
+ control = 0xe; /* coherent, clock enable, one half system clock */
+
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+ control |= 1;
+#endif
+ aup->tx_head = 0;
+ aup->tx_tail = 0;
+ aup->rx_head = 0;
+
+ for (i=0; i<NUM_IR_DESC; i++) {
+ aup->rx_ring[i]->flags = AU_OWN;
+ }
+
+ writel(control, IR_INTERFACE_CONFIG);
+ au_sync_delay(10);
+
+ writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */
+ au_sync_delay(1);
+
+ writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN);
+
+ ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]);
+ writel(ring_address >> 26, IR_RING_BASE_ADDR_H);
+ writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L);
+
+ writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE);
+
+ writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */
+ writel(0, IR_RING_ADDR_CMPR);
+
+ au1k_irda_set_speed(dev, 9600);
+ return 0;
+}
+
+static int au1k_irda_start(struct net_device *dev)
+{
+ int retval;
+ char hwname[32];
+ struct au1k_private *aup = netdev_priv(dev);
+
+ if ((retval = au1k_init(dev))) {
+ printk(KERN_ERR "%s: error in au1k_init\n", dev->name);
+ return retval;
+ }
+
+ if ((retval = request_irq(AU1000_IRDA_TX_INT, &au1k_irda_interrupt,
+ 0, dev->name, dev))) {
+ printk(KERN_ERR "%s: unable to get IRQ %d\n",
+ dev->name, dev->irq);
+ return retval;
+ }
+ if ((retval = request_irq(AU1000_IRDA_RX_INT, &au1k_irda_interrupt,
+ 0, dev->name, dev))) {
+ free_irq(AU1000_IRDA_TX_INT, dev);
+ printk(KERN_ERR "%s: unable to get IRQ %d\n",
+ dev->name, dev->irq);
+ return retval;
+ }
+
+ /* Give self a hardware name */
+ sprintf(hwname, "Au1000 SIR/FIR");
+ aup->irlap = irlap_open(dev, &aup->qos, hwname);
+ netif_start_queue(dev);
+
+ writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */
+
+ aup->timer.expires = RUN_AT((3*HZ));
+ aup->timer.data = (unsigned long)dev;
+ return 0;
+}
+
+static int au1k_irda_stop(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+
+ /* disable interrupts */
+ writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2);
+ writel(0, IR_CONFIG_1);
+ writel(0, IR_INTERFACE_CONFIG); /* disable clock */
+ au_sync();
+
+ if (aup->irlap) {
+ irlap_close(aup->irlap);
+ aup->irlap = NULL;
+ }
+
+ netif_stop_queue(dev);
+ del_timer(&aup->timer);
+
+ /* disable the interrupt */
+ free_irq(AU1000_IRDA_TX_INT, dev);
+ free_irq(AU1000_IRDA_RX_INT, dev);
+ return 0;
+}
+
+static void __exit au1k_irda_exit(void)
+{
+ struct net_device *dev = ir_devs[0];
+ struct au1k_private *aup = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ dma_free((void *)aup->db[0].vaddr,
+ MAX_BUF_SIZE * 2*NUM_IR_DESC);
+ dma_free((void *)aup->rx_ring[0],
+ 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
+ kfree(aup->rx_buff.head);
+ free_netdev(dev);
+}
+
+
+static inline void
+update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ struct net_device_stats *ps = &aup->stats;
+
+ ps->tx_packets++;
+ ps->tx_bytes += pkt_len;
+
+ if (status & IR_TX_ERROR) {
+ ps->tx_errors++;
+ ps->tx_aborted_errors++;
+ }
+}
+
+
+static void au1k_tx_ack(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ volatile ring_dest_t *ptxd;
+
+ ptxd = aup->tx_ring[aup->tx_tail];
+ while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
+ update_tx_stats(dev, ptxd->flags,
+ ptxd->count_1<<8 | ptxd->count_0);
+ ptxd->count_0 = 0;
+ ptxd->count_1 = 0;
+ au_sync();
+
+ aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
+ ptxd = aup->tx_ring[aup->tx_tail];
+
+ if (aup->tx_full) {
+ aup->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+ }
+
+ if (aup->tx_tail == aup->tx_head) {
+ if (aup->newspeed) {
+ au1k_irda_set_speed(dev, aup->newspeed);
+ aup->newspeed = 0;
+ }
+ else {
+ writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE,
+ IR_CONFIG_1);
+ au_sync();
+ writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE,
+ IR_CONFIG_1);
+ writel(0, IR_RING_PROMPT);
+ au_sync();
+ }
+ }
+}
+
+
+/*
+ * Au1000 transmit routine.
+ */
+static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ int speed = irda_get_next_speed(skb);
+ volatile ring_dest_t *ptxd;
+ u32 len;
+
+ u32 flags;
+ db_dest_t *pDB;
+
+ if (speed != aup->speed && speed != -1) {
+ aup->newspeed = speed;
+ }
+
+ if ((skb->len == 0) && (aup->newspeed)) {
+ if (aup->tx_tail == aup->tx_head) {
+ au1k_irda_set_speed(dev, speed);
+ aup->newspeed = 0;
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ ptxd = aup->tx_ring[aup->tx_head];
+ flags = ptxd->flags;
+
+ if (flags & AU_OWN) {
+ printk(KERN_DEBUG "%s: tx_full\n", dev->name);
+ netif_stop_queue(dev);
+ aup->tx_full = 1;
+ return 1;
+ }
+ else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
+ printk(KERN_DEBUG "%s: tx_full\n", dev->name);
+ netif_stop_queue(dev);
+ aup->tx_full = 1;
+ return 1;
+ }
+
+ pDB = aup->tx_db_inuse[aup->tx_head];
+
+#if 0
+ if (read_ir_reg(IR_RX_BYTE_CNT) != 0) {
+ printk("tx warning: rx byte cnt %x\n",
+ read_ir_reg(IR_RX_BYTE_CNT));
+ }
+#endif
+
+ if (aup->speed == 4000000) {
+ /* FIR */
+ memcpy((void *)pDB->vaddr, skb->data, skb->len);
+ ptxd->count_0 = skb->len & 0xff;
+ ptxd->count_1 = (skb->len >> 8) & 0xff;
+
+ }
+ else {
+ /* SIR */
+ len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE);
+ ptxd->count_0 = len & 0xff;
+ ptxd->count_1 = (len >> 8) & 0xff;
+ ptxd->flags |= IR_DIS_CRC;
+ au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c);
+ }
+ ptxd->flags |= AU_OWN;
+ au_sync();
+
+ writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1);
+ writel(0, IR_RING_PROMPT);
+ au_sync();
+
+ dev_kfree_skb(skb);
+ aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1);
+ dev->trans_start = jiffies;
+ return 0;
+}
+
+
+static inline void
+update_rx_stats(struct net_device *dev, u32 status, u32 count)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ struct net_device_stats *ps = &aup->stats;
+
+ ps->rx_packets++;
+
+ if (status & IR_RX_ERROR) {
+ ps->rx_errors++;
+ if (status & (IR_PHY_ERROR|IR_FIFO_OVER))
+ ps->rx_missed_errors++;
+ if (status & IR_MAX_LEN)
+ ps->rx_length_errors++;
+ if (status & IR_CRC_ERROR)
+ ps->rx_crc_errors++;
+ }
+ else
+ ps->rx_bytes += count;
+}
+
+/*
+ * Au1000 receive routine.
+ */
+static int au1k_irda_rx(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ struct sk_buff *skb;
+ volatile ring_dest_t *prxd;
+ u32 flags, count;
+ db_dest_t *pDB;
+
+ prxd = aup->rx_ring[aup->rx_head];
+ flags = prxd->flags;
+
+ while (!(flags & AU_OWN)) {
+ pDB = aup->rx_db_inuse[aup->rx_head];
+ count = prxd->count_1<<8 | prxd->count_0;
+ if (!(flags & IR_RX_ERROR)) {
+ /* good frame */
+ update_rx_stats(dev, flags, count);
+ skb=alloc_skb(count+1,GFP_ATOMIC);
+ if (skb == NULL) {
+ aup->stats.rx_dropped++;
+ continue;
+ }
+ skb_reserve(skb, 1);
+ if (aup->speed == 4000000)
+ skb_put(skb, count);
+ else
+ skb_put(skb, count-2);
+ memcpy(skb->data, (void *)pDB->vaddr, count-2);
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ prxd->count_0 = 0;
+ prxd->count_1 = 0;
+ }
+ prxd->flags |= AU_OWN;
+ aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
+ writel(0, IR_RING_PROMPT);
+ au_sync();
+
+ /* next descriptor */
+ prxd = aup->rx_ring[aup->rx_head];
+ flags = prxd->flags;
+ dev->last_rx = jiffies;
+
+ }
+ return 0;
+}
+
+
+void au1k_irda_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
+ return;
+ }
+
+ writel(0, IR_INT_CLEAR); /* ack irda interrupts */
+
+ au1k_irda_rx(dev);
+ au1k_tx_ack(dev);
+}
+
+
+/*
+ * The Tx ring has been full longer than the watchdog timeout
+ * value. The transmitter must be hung?
+ */
+static void au1k_tx_timeout(struct net_device *dev)
+{
+ u32 speed;
+ struct au1k_private *aup = netdev_priv(dev);
+
+ printk(KERN_ERR "%s: tx timeout\n", dev->name);
+ speed = aup->speed;
+ aup->speed = 0;
+ au1k_irda_set_speed(dev, speed);
+ aup->tx_full = 0;
+ netif_wake_queue(dev);
+}
+
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int
+au1k_irda_set_speed(struct net_device *dev, int speed)
+{
+ unsigned long flags;
+ struct au1k_private *aup = netdev_priv(dev);
+ u32 control;
+ int ret = 0, timeout = 10, i;
+ volatile ring_dest_t *ptxd;
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+ unsigned long irda_resets;
+#endif
+
+ if (speed == aup->speed)
+ return ret;
+
+ spin_lock_irqsave(&ir_lock, flags);
+
+ /* disable PHY first */
+ writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE);
+
+ /* disable RX/TX */
+ writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE),
+ IR_CONFIG_1);
+ au_sync_delay(1);
+ while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) {
+ mdelay(1);
+ if (!timeout--) {
+ printk(KERN_ERR "%s: rx/tx disable timeout\n",
+ dev->name);
+ break;
+ }
+ }
+
+ /* disable DMA */
+ writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1);
+ au_sync_delay(1);
+
+ /*
+ * After we disable tx/rx. the index pointers
+ * go back to zero.
+ */
+ aup->tx_head = aup->tx_tail = aup->rx_head = 0;
+ for (i=0; i<NUM_IR_DESC; i++) {
+ ptxd = aup->tx_ring[i];
+ ptxd->flags = 0;
+ ptxd->count_0 = 0;
+ ptxd->count_1 = 0;
+ }
+
+ for (i=0; i<NUM_IR_DESC; i++) {
+ ptxd = aup->rx_ring[i];
+ ptxd->count_0 = 0;
+ ptxd->count_1 = 0;
+ ptxd->flags = AU_OWN;
+ }
+
+ if (speed == 4000000) {
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+ bcsr->resets |= BCSR_RESETS_FIR_SEL;
+#else /* Pb1000 and Pb1100 */
+ writel(1<<13, CPLD_AUX1);
+#endif
+ }
+ else {
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
+ bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
+#else /* Pb1000 and Pb1100 */
+ writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
+#endif
+ }
+
+ switch (speed) {
+ case 9600:
+ writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
+ writel(IR_SIR_MODE, IR_CONFIG_1);
+ break;
+ case 19200:
+ writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
+ writel(IR_SIR_MODE, IR_CONFIG_1);
+ break;
+ case 38400:
+ writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
+ writel(IR_SIR_MODE, IR_CONFIG_1);
+ break;
+ case 57600:
+ writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
+ writel(IR_SIR_MODE, IR_CONFIG_1);
+ break;
+ case 115200:
+ writel(12<<5, IR_WRITE_PHY_CONFIG);
+ writel(IR_SIR_MODE, IR_CONFIG_1);
+ break;
+ case 4000000:
+ writel(0xF, IR_WRITE_PHY_CONFIG);
+ writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1);
+ break;
+ default:
+ printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
+ ret = -EINVAL;
+ break;
+ }
+
+ aup->speed = speed;
+ writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE);
+ au_sync();
+
+ control = read_ir_reg(IR_ENABLE);
+ writel(0, IR_RING_PROMPT);
+ au_sync();
+
+ if (control & (1<<14)) {
+ printk(KERN_ERR "%s: configuration error\n", dev->name);
+ }
+ else {
+ if (control & (1<<11))
+ printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
+ if (control & (1<<12))
+ printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
+ if (control & (1<<13))
+ printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
+ if (control & (1<<10))
+ printk(KERN_DEBUG "%s TX enabled\n", dev->name);
+ if (control & (1<<9))
+ printk(KERN_DEBUG "%s RX enabled\n", dev->name);
+ }
+
+ spin_unlock_irqrestore(&ir_lock, flags);
+ return ret;
+}
+
+static int
+au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct au1k_private *aup = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (aup->open)
+ ret = au1k_irda_set_speed(dev,
+ rq->ifr_baudrate);
+ else {
+ printk(KERN_ERR "%s ioctl: !netif_running\n",
+ dev->name);
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ rq->ifr_receiving = 0;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+
+static struct net_device_stats *au1k_irda_stats(struct net_device *dev)
+{
+ struct au1k_private *aup = netdev_priv(dev);
+ return &aup->stats;
+}
+
+MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
+MODULE_DESCRIPTION("Au1000 IrDA Device Driver");
+
+module_init(au1k_irda_init);
+module_exit(au1k_irda_exit);
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
new file mode 100644
index 000000000000..0a08c539c051
--- /dev/null
+++ b/drivers/net/irda/donauboe.c
@@ -0,0 +1,1789 @@
+/*****************************************************************
+ *
+ * Filename: donauboe.c
+ * Version: 2.17
+ * Description: Driver for the Toshiba OBOE (or type-O or 701)
+ * FIR Chipset, also supports the DONAUOBOE (type-DO
+ * or d01) FIR chipset which as far as I know is
+ * register compatible.
+ * Documentation: http://libxg.free.fr/irda/lib-irda.html
+ * Status: Experimental.
+ * Author: James McKenzie <james@fishsoup.dhs.org>
+ * Created at: Sat May 8 12:35:27 1999
+ * Modified: Paul Bristow <paul.bristow@technologist.com>
+ * Modified: Mon Nov 11 19:10:05 1999
+ * Modified: James McKenzie <james@fishsoup.dhs.org>
+ * Modified: Thu Mar 16 12:49:00 2000 (Substantial rewrite)
+ * Modified: Sat Apr 29 00:23:03 2000 (Added DONAUOBOE support)
+ * Modified: Wed May 24 23:45:02 2000 (Fixed chipio_t structure)
+ * Modified: 2.13 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.13 dim jan 07 21:57:39 2001 (tested with kernel 2.4 & irnet/ppp)
+ * Modified: 2.14 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.14 lun fev 05 17:55:59 2001 (adapted to patch-2.4.1-pre8-irda1)
+ * Modified: 2.15 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.15 Fri Jun 21 20:40:59 2002 (sync with 2.4.18, substantial fixes)
+ * Modified: 2.16 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.16 Sat Jun 22 18:54:29 2002 (fix freeregion, default to verbose)
+ * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.17 jeu sep 12 08:50:20 2002 (save_flags();cli(); replaced by spinlocks)
+ * Modified: 2.18 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.18 ven jan 10 03:14:16 2003 Change probe default options
+ *
+ * Copyright (c) 1999 James McKenzie, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither James McKenzie nor Cambridge University admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Applicable Models : Libretto 100/110CT and many more.
+ * Toshiba refers to this chip as the type-O IR port,
+ * or the type-DO IR port.
+ *
+ ********************************************************************/
+
+/* Look at toshoboe.h (currently in include/net/irda) for details of */
+/* Where to get documentation on the chip */
+
+
+static char *rcsid =
+ "$Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$";
+
+/* See below for a description of the logic in this driver */
+
+/* User servicable parts */
+/* USE_PROBE Create the code which probes the chip and does a few tests */
+/* do_probe module parameter Enable this code */
+/* Probe code is very useful for understanding how the hardware works */
+/* Use it with various combinations of TT_LEN, RX_LEN */
+/* Strongly recomended, disable if the probe fails on your machine */
+/* and send me <james@fishsoup.dhs.org> the output of dmesg */
+#define USE_PROBE 1
+#undef USE_PROBE
+
+/* Trace Transmit ring, interrupts, Receive ring or not ? */
+#define PROBE_VERBOSE 1
+
+/* Debug option, examine sent and received raw data */
+/* Irdadump is better, but does not see all packets. enable it if you want. */
+#undef DUMP_PACKETS
+
+/* MIR mode has not been tested. Some behaviour is different */
+/* Seems to work against an Ericsson R520 for me. -Martin */
+#define USE_MIR
+
+/* Schedule back to back hardware transmits wherever possible, otherwise */
+/* we need an interrupt for every frame, unset if oboe works for a bit and */
+/* then hangs */
+#define OPTIMIZE_TX
+
+/* Set the number of slots in the rings */
+/* If you get rx/tx fifo overflows at high bitrates, you can try increasing */
+/* these */
+
+#define RING_SIZE (OBOE_RING_SIZE_RX8 | OBOE_RING_SIZE_TX8)
+#define TX_SLOTS 8
+#define RX_SLOTS 8
+
+
+/* Less user servicable parts below here */
+
+/* Test, Transmit and receive buffer sizes, adjust at your peril */
+/* remarks: nfs usually needs 1k blocks */
+/* remarks: in SIR mode, CRC is received, -> RX_LEN=TX_LEN+2 */
+/* remarks: test accepts large blocks. Standard is 0x80 */
+/* When TT_LEN > RX_LEN (SIR mode) data is stored in successive slots. */
+/* When 3 or more slots are needed for each test packet, */
+/* data received in the first slots is overwritten, even */
+/* if OBOE_CTL_RX_HW_OWNS is not set, without any error! */
+#define TT_LEN 0x80
+#define TX_LEN 0xc00
+#define RX_LEN 0xc04
+/* Real transmitted length (SIR mode) is about 14+(2%*TX_LEN) more */
+/* long than user-defined length (see async_wrap_skb) and is less then 4K */
+/* Real received length is (max RX_LEN) differs from user-defined */
+/* length only b the CRC (2 or 4 bytes) */
+#define BUF_SAFETY 0x7a
+#define RX_BUF_SZ (RX_LEN)
+#define TX_BUF_SZ (TX_LEN+BUF_SAFETY)
+
+
+/* Logic of the netdev part of this driver */
+
+/* The RX ring is filled with buffers, when a packet arrives */
+/* it is DMA'd into the buffer which is marked used and RxDone called */
+/* RxDone forms an skb (and checks the CRC if in SIR mode) and ships */
+/* the packet off upstairs */
+
+/* The transmitter on the oboe chip can work in one of two modes */
+/* for each ring->tx[] the transmitter can either */
+/* a) transmit the packet, leave the trasmitter enabled and proceed to */
+/* the next ring */
+/* OR */
+/* b) transmit the packet, switch off the transmitter and issue TxDone */
+
+/* All packets are entered into the ring in mode b), if the ring was */
+/* empty the transmitter is started. */
+
+/* If OPTIMIZE_TX is defined then in TxDone if the ring contains */
+/* more than one packet, all but the last are set to mode a) [HOWEVER */
+/* the hardware may not notice this, this is why we start in mode b) ] */
+/* then restart the transmitter */
+
+/* If OPTIMIZE_TX is not defined then we just restart the transmitter */
+/* if the ring isn't empty */
+
+/* Speed changes are delayed until the TxRing is empty */
+/* mtt is handled by generating packets with bad CRCs, before the data */
+
+/* TODO: */
+/* check the mtt works ok */
+/* finish the watchdog */
+
+/* No user servicable parts below here */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/rtnetlink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+//#include <net/irda/irmod.h>
+//#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/crc.h>
+
+#include "donauboe.h"
+
+#define INB(port) inb_p(port)
+#define OUTB(val,port) outb_p(val,port)
+#define OUTBP(val,port) outb_p(val,port)
+
+#define PROMPT OUTB(OBOE_PROMPT_BIT,OBOE_PROMPT);
+
+#if PROBE_VERBOSE
+#define PROBE_DEBUG(args...) (printk (args))
+#else
+#define PROBE_DEBUG(args...) ;
+#endif
+
+/* Set the DMA to be byte at a time */
+#define CONFIG0H_DMA_OFF OBOE_CONFIG0H_RCVANY
+#define CONFIG0H_DMA_ON_NORX CONFIG0H_DMA_OFF| OBOE_CONFIG0H_ENDMAC
+#define CONFIG0H_DMA_ON CONFIG0H_DMA_ON_NORX | OBOE_CONFIG0H_ENRX
+
+static struct pci_device_id toshoboe_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIRD01, PCI_ANY_ID, PCI_ANY_ID, },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, toshoboe_pci_tbl);
+
+#define DRIVER_NAME "toshoboe"
+static char *driver_name = DRIVER_NAME;
+
+static int max_baud = 4000000;
+#ifdef USE_PROBE
+static int do_probe = 0;
+#endif
+
+
+/**********************************************************************/
+static int
+toshoboe_checkfcs (unsigned char *buf, int len)
+{
+ int i;
+ union
+ {
+ __u16 value;
+ __u8 bytes[2];
+ }
+ fcs;
+
+ fcs.value = INIT_FCS;
+
+ for (i = 0; i < len; ++i)
+ fcs.value = irda_fcs (fcs.value, *(buf++));
+
+ return (fcs.value == GOOD_FCS);
+}
+
+/***********************************************************************/
+/* Generic chip handling code */
+#ifdef DUMP_PACKETS
+static unsigned char dump[50];
+static void
+_dumpbufs (unsigned char *data, int len, char tete)
+{
+int i,j;
+char head=tete;
+for (i=0;i<len;i+=16) {
+ for (j=0;j<16 && i+j<len;j++) { sprintf(&dump[3*j],"%02x.",data[i+j]); }
+ dump [3*j]=0;
+ IRDA_DEBUG (2, "%c%s\n",head , dump);
+ head='+';
+ }
+}
+#endif
+
+#ifdef USE_PROBE
+/* Dump the registers */
+static void
+toshoboe_dumpregs (struct toshoboe_cb *self)
+{
+ __u32 ringbase;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ ringbase = INB (OBOE_RING_BASE0) << 10;
+ ringbase |= INB (OBOE_RING_BASE1) << 18;
+ ringbase |= INB (OBOE_RING_BASE2) << 26;
+
+ printk (KERN_ERR DRIVER_NAME ": Register dump:\n");
+ printk (KERN_ERR "Interrupts: Tx:%d Rx:%d TxUnder:%d RxOver:%d Sip:%d\n",
+ self->int_tx, self->int_rx, self->int_txunder, self->int_rxover,
+ self->int_sip);
+ printk (KERN_ERR "RX %02x TX %02x RingBase %08x\n",
+ INB (OBOE_RXSLOT), INB (OBOE_TXSLOT), ringbase);
+ printk (KERN_ERR "RING_SIZE %02x IER %02x ISR %02x\n",
+ INB (OBOE_RING_SIZE), INB (OBOE_IER), INB (OBOE_ISR));
+ printk (KERN_ERR "CONFIG1 %02x STATUS %02x\n",
+ INB (OBOE_CONFIG1), INB (OBOE_STATUS));
+ printk (KERN_ERR "CONFIG0 %02x%02x ENABLE %02x%02x\n",
+ INB (OBOE_CONFIG0H), INB (OBOE_CONFIG0L),
+ INB (OBOE_ENABLEH), INB (OBOE_ENABLEL));
+ printk (KERN_ERR "NEW_PCONFIG %02x%02x CURR_PCONFIG %02x%02x\n",
+ INB (OBOE_NEW_PCONFIGH), INB (OBOE_NEW_PCONFIGL),
+ INB (OBOE_CURR_PCONFIGH), INB (OBOE_CURR_PCONFIGL));
+ printk (KERN_ERR "MAXLEN %02x%02x RXCOUNT %02x%02x\n",
+ INB (OBOE_MAXLENH), INB (OBOE_MAXLENL),
+ INB (OBOE_RXCOUNTL), INB (OBOE_RXCOUNTH));
+
+ if (self->ring)
+ {
+ int i;
+ ringbase = virt_to_bus (self->ring);
+ printk (KERN_ERR "Ring at %08x:\n", ringbase);
+ printk (KERN_ERR "RX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ printk (" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
+ printk ("\n");
+ printk (KERN_ERR "TX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ printk (" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
+ printk ("\n");
+ }
+}
+#endif
+
+/*Don't let the chip look at memory */
+static void
+toshoboe_disablebm (struct toshoboe_cb *self)
+{
+ __u8 command;
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
+ command &= ~PCI_COMMAND_MASTER;
+ pci_write_config_byte (self->pdev, PCI_COMMAND, command);
+
+}
+
+/* Shutdown the chip and point the taskfile reg somewhere else */
+static void
+toshoboe_stopchip (struct toshoboe_cb *self)
+{
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ /*Disable interrupts */
+ OUTB (0x0, OBOE_IER);
+ /*Disable DMA, Disable Rx, Disable Tx */
+ OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+ /*Disable SIR MIR FIR, Tx and Rx */
+ OUTB (0x00, OBOE_ENABLEH);
+ /*Point the ring somewhere safe */
+ OUTB (0x3f, OBOE_RING_BASE2);
+ OUTB (0xff, OBOE_RING_BASE1);
+ OUTB (0xff, OBOE_RING_BASE0);
+
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Why */
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ /*switch it off */
+ OUTB (OBOE_CONFIG1_OFF, OBOE_CONFIG1);
+
+ toshoboe_disablebm (self);
+}
+
+/* Transmitter initialization */
+static void
+toshoboe_start_DMA (struct toshoboe_cb *self, int opts)
+{
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (CONFIG0H_DMA_ON | opts, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+ PROMPT;
+}
+
+/*Set the baud rate */
+static void
+toshoboe_setbaud (struct toshoboe_cb *self)
+{
+ __u16 pconfig = 0;
+ __u8 config0l = 0;
+
+ IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
+
+ switch (self->speed)
+ {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+#ifdef USE_MIR
+ case 1152000:
+#endif
+ case 4000000:
+ break;
+ default:
+
+ printk (KERN_ERR DRIVER_NAME ": switch to unsupported baudrate %d\n",
+ self->speed);
+ return;
+ }
+
+ switch (self->speed)
+ {
+ /* For SIR the preamble is done by adding XBOFs */
+ /* to the packet */
+ /* set to filtered SIR mode, filter looks for BOF and EOF */
+ case 2400:
+ pconfig |= 47 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 4800:
+ pconfig |= 23 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 9600:
+ pconfig |= 11 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 19200:
+ pconfig |= 5 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 38400:
+ pconfig |= 2 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 57600:
+ pconfig |= 1 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 115200:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ default:
+ /*Set to packet based reception */
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+ break;
+ }
+
+ switch (self->speed)
+ {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ config0l = OBOE_CONFIG0L_ENSIR;
+ if (self->async)
+ {
+ /*Set to character based reception */
+ /*System will lock if MAXLEN=0 */
+ /*so have to be careful */
+ OUTB (0x01, OBOE_MAXLENH);
+ OUTB (0x01, OBOE_MAXLENL);
+ OUTB (0x00, OBOE_MAXLENH);
+ }
+ else
+ {
+ /*Set to packet based reception */
+ config0l |= OBOE_CONFIG0L_ENSIRF;
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+ }
+ break;
+
+#ifdef USE_MIR
+ /* MIR mode */
+ /* Set for 16 bit CRC and enable MIR */
+ /* Preamble now handled by the chip */
+ case 1152000:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 8 << OBOE_PCONFIG_WIDTHSHIFT;
+ pconfig |= 1 << OBOE_PCONFIG_PREAMBLESHIFT;
+ config0l = OBOE_CONFIG0L_CRC16 | OBOE_CONFIG0L_ENMIR;
+ break;
+#endif
+ /* FIR mode */
+ /* Set for 32 bit CRC and enable FIR */
+ /* Preamble handled by the chip */
+ case 4000000:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ /* Documentation says 14, but toshiba use 15 in their drivers */
+ pconfig |= 15 << OBOE_PCONFIG_PREAMBLESHIFT;
+ config0l = OBOE_CONFIG0L_ENFIR;
+ break;
+ }
+
+ /* Copy into new PHY config buffer */
+ OUTBP (pconfig >> 8, OBOE_NEW_PCONFIGH);
+ OUTB (pconfig & 0xff, OBOE_NEW_PCONFIGL);
+ OUTB (config0l, OBOE_CONFIG0L);
+
+ /* Now make OBOE copy from new PHY to current PHY */
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+ PROMPT;
+
+ /* speed change executed */
+ self->new_speed = 0;
+ self->io.speed = self->speed;
+}
+
+/*Let the chip look at memory */
+static void
+toshoboe_enablebm (struct toshoboe_cb *self)
+{
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+ pci_set_master (self->pdev);
+}
+
+/*setup the ring */
+static void
+toshoboe_initring (struct toshoboe_cb *self)
+{
+ int i;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ self->ring->tx[i].len = 0;
+ self->ring->tx[i].control = 0x00;
+ self->ring->tx[i].address = virt_to_bus (self->tx_bufs[i]);
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ self->ring->rx[i].len = RX_LEN;
+ self->ring->rx[i].len = 0;
+ self->ring->rx[i].address = virt_to_bus (self->rx_bufs[i]);
+ self->ring->rx[i].control = OBOE_CTL_RX_HW_OWNS;
+ }
+}
+
+static void
+toshoboe_resetptrs (struct toshoboe_cb *self)
+{
+ /* Can reset pointers by twidling DMA */
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTBP (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ self->rxs = inb_p (OBOE_RXSLOT) & OBOE_SLOT_MASK;
+ self->txs = inb_p (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+}
+
+/* Called in locked state */
+static void
+toshoboe_initptrs (struct toshoboe_cb *self)
+{
+
+ /* spin_lock_irqsave(self->spinlock, flags); */
+ /* save_flags (flags); */
+
+ /* Can reset pointers by twidling DMA */
+ toshoboe_resetptrs (self);
+
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ self->txpending = 0;
+
+ /* spin_unlock_irqrestore(self->spinlock, flags); */
+ /* restore_flags (flags); */
+}
+
+/* Wake the chip up and get it looking at the rings */
+/* Called in locked state */
+static void
+toshoboe_startchip (struct toshoboe_cb *self)
+{
+ __u32 physaddr;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ toshoboe_initring (self);
+ toshoboe_enablebm (self);
+ OUTBP (OBOE_CONFIG1_RESET, OBOE_CONFIG1);
+ OUTBP (OBOE_CONFIG1_ON, OBOE_CONFIG1);
+
+ /* Stop the clocks */
+ OUTB (0, OBOE_ENABLEH);
+
+ /*Set size of rings */
+ OUTB (RING_SIZE, OBOE_RING_SIZE);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Enable ints */
+ OUTB (OBOE_INT_TXDONE | OBOE_INT_RXDONE |
+ OBOE_INT_TXUNDER | OBOE_INT_RXOVER | OBOE_INT_SIP , OBOE_IER);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Set the maximum packet length to 0xfff (4095) */
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+
+ /*Shutdown DMA */
+ OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+
+ /*Find out where the rings live */
+ physaddr = virt_to_bus (self->ring);
+
+ IRDA_ASSERT ((physaddr & 0x3ff) == 0,
+ printk (KERN_ERR DRIVER_NAME "ring not correctly aligned\n");
+ return;);
+
+ OUTB ((physaddr >> 10) & 0xff, OBOE_RING_BASE0);
+ OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1);
+ OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2);
+
+ /*Enable DMA controler in byte mode and RX */
+ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
+
+ /* Start up the clocks */
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ /*set to sensible speed */
+ self->speed = 9600;
+ toshoboe_setbaud (self);
+ toshoboe_initptrs (self);
+}
+
+static void
+toshoboe_isntstuck (struct toshoboe_cb *self)
+{
+}
+
+static void
+toshoboe_checkstuck (struct toshoboe_cb *self)
+{
+ unsigned long flags;
+
+ if (0)
+ {
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ /* This will reset the chip completely */
+ printk (KERN_ERR DRIVER_NAME ": Resetting chip\n");
+
+ toshoboe_stopchip (self);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+}
+
+/*Generate packet of about mtt us long */
+static int
+toshoboe_makemttpacket (struct toshoboe_cb *self, void *buf, int mtt)
+{
+ int xbofs;
+
+ xbofs = ((int) (mtt/100)) * (int) (self->speed);
+ xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/
+ xbofs++;
+
+ IRDA_DEBUG (2, DRIVER_NAME
+ ": generated mtt of %d bytes for %d us at %d baud\n"
+ , xbofs,mtt,self->speed);
+
+ if (xbofs > TX_LEN)
+ {
+ printk (KERN_ERR DRIVER_NAME ": wanted %d bytes MTT but TX_LEN is %d\n",
+ xbofs, TX_LEN);
+ xbofs = TX_LEN;
+ }
+
+ /*xbofs will do for SIR, MIR and FIR,SIR mode doesn't generate a checksum anyway */
+ memset (buf, XBOF, xbofs);
+
+ return xbofs;
+}
+
+static int toshoboe_invalid_dev(int irq)
+{
+ printk (KERN_WARNING DRIVER_NAME ": irq %d for unknown device.\n", irq);
+ return 1;
+}
+
+#ifdef USE_PROBE
+/***********************************************************************/
+/* Probe code */
+
+static void
+toshoboe_dumptx (struct toshoboe_cb *self)
+{
+ int i;
+ PROBE_DEBUG(KERN_WARNING "TX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ PROBE_DEBUG(" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
+ PROBE_DEBUG(" [%d]\n",self->speed);
+}
+
+static void
+toshoboe_dumprx (struct toshoboe_cb *self, int score)
+{
+ int i;
+ PROBE_DEBUG(" %d\nRX:",score);
+ for (i = 0; i < RX_SLOTS; ++i)
+ PROBE_DEBUG(" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
+ PROBE_DEBUG("\n");
+}
+
+static inline int
+stuff_byte (__u8 byte, __u8 * buf)
+{
+ switch (byte)
+ {
+ case BOF: /* FALLTHROUGH */
+ case EOF: /* FALLTHROUGH */
+ case CE:
+ /* Insert transparently coded */
+ buf[0] = CE; /* Send link escape */
+ buf[1] = byte ^ IRDA_TRANS; /* Complement bit 5 */
+ return 2;
+ /* break; */
+ default:
+ /* Non-special value, no transparency required */
+ buf[0] = byte;
+ return 1;
+ /* break; */
+ }
+}
+
+static irqreturn_t
+toshoboe_probeinterrupt (int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
+ __u8 irqstat;
+
+ if (self == NULL && toshoboe_invalid_dev(irq))
+ return IRQ_NONE;
+
+ irqstat = INB (OBOE_ISR);
+
+/* was it us */
+ if (!(irqstat & OBOE_INT_MASK))
+ return IRQ_NONE;
+
+/* Ack all the interrupts */
+ OUTB (irqstat, OBOE_ISR);
+
+ if (irqstat & OBOE_INT_TXDONE)
+ {
+ int txp;
+
+ self->int_tx++;
+ PROBE_DEBUG("T");
+
+ txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+ if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ self->int_tx+=100;
+ PROBE_DEBUG("S");
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+ }
+ }
+
+ if (irqstat & OBOE_INT_RXDONE) {
+ self->int_rx++;
+ PROBE_DEBUG("R"); }
+ if (irqstat & OBOE_INT_TXUNDER) {
+ self->int_txunder++;
+ PROBE_DEBUG("U"); }
+ if (irqstat & OBOE_INT_RXOVER) {
+ self->int_rxover++;
+ PROBE_DEBUG("O"); }
+ if (irqstat & OBOE_INT_SIP) {
+ self->int_sip++;
+ PROBE_DEBUG("I"); }
+ return IRQ_HANDLED;
+}
+
+static int
+toshoboe_maketestpacket (unsigned char *buf, int badcrc, int fir)
+{
+ int i;
+ int len = 0;
+ union
+ {
+ __u16 value;
+ __u8 bytes[2];
+ }
+ fcs;
+
+ if (fir)
+ {
+ memset (buf, 0, TT_LEN);
+ return (TT_LEN);
+ }
+
+ fcs.value = INIT_FCS;
+
+ memset (buf, XBOF, 10);
+ len += 10;
+ buf[len++] = BOF;
+
+ for (i = 0; i < TT_LEN; ++i)
+ {
+ len += stuff_byte (i, buf + len);
+ fcs.value = irda_fcs (fcs.value, i);
+ }
+
+ len += stuff_byte (fcs.bytes[0] ^ badcrc, buf + len);
+ len += stuff_byte (fcs.bytes[1] ^ badcrc, buf + len);
+ buf[len++] = EOF;
+ len++;
+ return len;
+}
+
+static int
+toshoboe_probefail (struct toshoboe_cb *self, char *msg)
+{
+ printk (KERN_ERR DRIVER_NAME "probe(%d) failed %s\n",self-> speed, msg);
+ toshoboe_dumpregs (self);
+ toshoboe_stopchip (self);
+ free_irq (self->io.irq, (void *) self);
+ return 0;
+}
+
+static int
+toshoboe_numvalidrcvs (struct toshoboe_cb *self)
+{
+ int i, ret = 0;
+ for (i = 0; i < RX_SLOTS; ++i)
+ if ((self->ring->rx[i].control & 0xe0) == 0)
+ ret++;
+
+ return ret;
+}
+
+static int
+toshoboe_numrcvs (struct toshoboe_cb *self)
+{
+ int i, ret = 0;
+ for (i = 0; i < RX_SLOTS; ++i)
+ if (!(self->ring->rx[i].control & OBOE_CTL_RX_HW_OWNS))
+ ret++;
+
+ return ret;
+}
+
+static int
+toshoboe_probe (struct toshoboe_cb *self)
+{
+ int i, j, n;
+#ifdef USE_MIR
+ int bauds[] = { 9600, 115200, 4000000, 1152000 };
+#else
+ int bauds[] = { 9600, 115200, 4000000 };
+#endif
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (request_irq (self->io.irq, toshoboe_probeinterrupt,
+ self->io.irqflags, "toshoboe", (void *) self))
+ {
+ printk (KERN_ERR DRIVER_NAME ": probe failed to allocate irq %d\n",
+ self->io.irq);
+ return 0;
+ }
+
+ /* test 1: SIR filter and back to back */
+
+ for (j = 0; j < (sizeof (bauds) / sizeof (int)); ++j)
+ {
+ int fir = (j > 1);
+ toshoboe_stopchip (self);
+
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ /*Address is already setup */
+ toshoboe_startchip (self);
+ self->int_rx = self->int_tx = 0;
+ self->speed = bauds[j];
+ toshoboe_setbaud (self);
+ toshoboe_initptrs (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ self->ring->tx[self->txs].control =
+/* (FIR only) OBOE_CTL_TX_SIP needed for switching to next slot */
+/* MIR: all received data is stored in one slot */
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ : OBOE_CTL_TX_HW_OWNS ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_SIP
+ : OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ : OBOE_CTL_TX_HW_OWNS ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ | OBOE_CTL_TX_SIP | OBOE_CTL_TX_BAD_CRC
+ : OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ toshoboe_dumptx (self);
+ /* Turn on TX and RX and loopback */
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ i = 0;
+ n = fir ? 1 : 4;
+ while (toshoboe_numvalidrcvs (self) != n)
+ {
+ if (i > 4800)
+ return toshoboe_probefail (self, "filter test");
+ udelay ((9600*(TT_LEN+16))/self->speed);
+ i++;
+ }
+
+ n = fir ? 203 : 102;
+ while ((toshoboe_numrcvs(self) != self->int_rx) || (self->int_tx != n))
+ {
+ if (i > 4800)
+ return toshoboe_probefail (self, "interrupt test");
+ udelay ((9600*(TT_LEN+16))/self->speed);
+ i++;
+ }
+ toshoboe_dumprx (self,i);
+
+ }
+
+ /* test 2: SIR in char at a time */
+
+ toshoboe_stopchip (self);
+ self->int_rx = self->int_tx = 0;
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ self->async = 1;
+ self->speed = 115200;
+ toshoboe_setbaud (self);
+ self->ring->tx[self->txs].control =
+ OBOE_CTL_TX_RTCENTX | OBOE_CTL_TX_HW_OWNS;
+ self->ring->tx[self->txs].len = 4;
+
+ ((unsigned char *) self->tx_bufs[self->txs])[0] = 'f';
+ ((unsigned char *) self->tx_bufs[self->txs])[1] = 'i';
+ ((unsigned char *) self->tx_bufs[self->txs])[2] = 's';
+ ((unsigned char *) self->tx_bufs[self->txs])[3] = 'h';
+ toshoboe_dumptx (self);
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ i = 0;
+ while (toshoboe_numvalidrcvs (self) != 4)
+ {
+ if (i > 100)
+ return toshoboe_probefail (self, "Async test");
+ udelay (100);
+ i++;
+ }
+
+ while ((toshoboe_numrcvs (self) != self->int_rx) || (self->int_tx != 1))
+ {
+ if (i > 100)
+ return toshoboe_probefail (self, "Async interrupt test");
+ udelay (100);
+ i++;
+ }
+ toshoboe_dumprx (self,i);
+
+ self->async = 0;
+ self->speed = 9600;
+ toshoboe_setbaud (self);
+ toshoboe_stopchip (self);
+
+ free_irq (self->io.irq, (void *) self);
+
+ printk (KERN_WARNING DRIVER_NAME ": Self test passed ok\n");
+
+ return 1;
+}
+#endif
+
+/******************************************************************/
+/* Netdev style code */
+
+/* Transmit something */
+static int
+toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+ __s32 speed;
+ int mtt, len, ctl;
+ unsigned long flags;
+ struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+
+ self = (struct toshoboe_cb *) dev->priv;
+
+ IRDA_ASSERT (self != NULL, return 0; );
+
+ IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
+ ,skb->len,self->txpending,INB (OBOE_ENABLEH));
+ if (!cb->magic) {
+ IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
+#ifdef DUMP_PACKETS
+ _dumpbufs(skb->data,skb->len,'>');
+#endif
+ }
+
+ /* change speed pending, wait for its execution */
+ if (self->new_speed)
+ return -EBUSY;
+
+ /* device stopped (apm) wait for restart */
+ if (self->stopped)
+ return -EBUSY;
+
+ toshoboe_checkstuck (self);
+
+ dev->trans_start = jiffies;
+
+ /* Check if we need to change the speed */
+ /* But not now. Wait after transmission if mtt not required */
+ speed=irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1))
+ {
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->txpending || skb->len)
+ {
+ self->new_speed = speed;
+ IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
+ __FUNCTION__, speed);
+ /* if no data, that's all! */
+ if (!skb->len)
+ {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+ return 0;
+ }
+ /* True packet, go on, but */
+ /* do not accept anything before change speed execution */
+ netif_stop_queue(dev);
+ /* ready to process TxDone interrupt */
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+ else
+ {
+ /* idle and no data, change speed now */
+ self->speed = speed;
+ toshoboe_setbaud (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+ return 0;
+ }
+
+ }
+
+ if ((mtt = irda_get_mtt(skb)))
+ {
+ /* This is fair since the queue should be empty anyway */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->txpending)
+ {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -EBUSY;
+ }
+
+ /* If in SIR mode we need to generate a string of XBOFs */
+ /* In MIR and FIR we need to generate a string of data */
+ /* which we will add a wrong checksum to */
+
+ mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
+ IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
+ ,skb->len,mtt,self->txpending);
+ if (mtt)
+ {
+ self->ring->tx[self->txs].len = mtt & 0xfff;
+
+ ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
+ {
+ ctl |= OBOE_CTL_TX_BAD_CRC | OBOE_CTL_TX_SIP ;
+ }
+#ifdef USE_MIR
+ else if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_MIRON)
+ {
+ ctl |= OBOE_CTL_TX_BAD_CRC;
+ }
+#endif
+ self->ring->tx[self->txs].control = ctl;
+
+ OUTB (0x0, OBOE_ENABLEH);
+ /* It is only a timer. Do not send mtt packet outside! */
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ self->txpending++;
+
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ }
+ else
+ {
+ printk(KERN_ERR DRIVER_NAME ": problem with mtt packet - ignored\n");
+ }
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+
+#ifdef DUMP_PACKETS
+dumpbufs(skb->data,skb->len,'>');
+#endif
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
+ ,skb->len, self->ring->tx[self->txs].control, self->txpending);
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -EBUSY;
+ }
+
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_SIRON)
+ {
+ len = async_wrap_skb (skb, self->tx_bufs[self->txs], TX_BUF_SZ);
+ }
+ else
+ {
+ len = skb->len;
+ memcpy (self->tx_bufs[self->txs], skb->data, len);
+ }
+ self->ring->tx[self->txs].len = len & 0x0fff;
+
+ /*Sometimes the HW doesn't see us assert RTCENTX in the interrupt code */
+ /*later this plays safe, we garuntee the last packet to be transmitted */
+ /*has RTCENTX set */
+
+ ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
+ {
+ ctl |= OBOE_CTL_TX_SIP ;
+ }
+ self->ring->tx[self->txs].control = ctl;
+
+ /* If transmitter is idle start in one-shot mode */
+
+ if (!self->txpending)
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+
+ self->txpending++;
+
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+
+ return 0;
+}
+
+/*interrupt handler */
+static irqreturn_t
+toshoboe_interrupt (int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
+ __u8 irqstat;
+ struct sk_buff *skb = NULL;
+
+ if (self == NULL && toshoboe_invalid_dev(irq))
+ return IRQ_NONE;
+
+ irqstat = INB (OBOE_ISR);
+
+/* was it us */
+ if (!(irqstat & OBOE_INT_MASK))
+ return IRQ_NONE;
+
+/* Ack all the interrupts */
+ OUTB (irqstat, OBOE_ISR);
+
+ toshoboe_isntstuck (self);
+
+/* Txdone */
+ if (irqstat & OBOE_INT_TXDONE)
+ {
+ int txp, txpc;
+ int i;
+
+ txp = self->txpending;
+ self->txpending = 0;
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
+ self->txpending++;
+ }
+ IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
+ ,irqstat,txp,self->txpending);
+
+ txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+
+ /* Got anything queued ? start it together */
+ if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ txpc = txp;
+#ifdef OPTIMIZE_TX
+ while (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ txp = txpc;
+ txpc++;
+ txpc %= TX_SLOTS;
+ self->stats.tx_packets++;
+ if (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
+ self->ring->tx[txp].control &= ~OBOE_CTL_TX_RTCENTX;
+ }
+ self->stats.tx_packets--;
+#else
+ self->stats.tx_packets++;
+#endif
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+ }
+
+ if ((!self->txpending) && (self->new_speed))
+ {
+ self->speed = self->new_speed;
+ IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
+ __FUNCTION__, self->speed);
+ toshoboe_setbaud (self);
+ }
+
+ /* Tell network layer that we want more frames */
+ if (!self->new_speed)
+ netif_wake_queue(self->netdev);
+ }
+
+ if (irqstat & OBOE_INT_RXDONE)
+ {
+ while (!(self->ring->rx[self->rxs].control & OBOE_CTL_RX_HW_OWNS))
+ {
+ int len = self->ring->rx[self->rxs].len;
+ skb = NULL;
+ IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
+ ,len,self->ring->rx[self->rxs].control);
+
+#ifdef DUMP_PACKETS
+dumpbufs(self->rx_bufs[self->rxs],len,'<');
+#endif
+
+ if (self->ring->rx[self->rxs].control == 0)
+ {
+ __u8 enable = INB (OBOE_ENABLEH);
+
+ /* In SIR mode we need to check the CRC as this */
+ /* hasn't been done by the hardware */
+ if (enable & OBOE_ENABLEH_SIRON)
+ {
+ if (!toshoboe_checkfcs (self->rx_bufs[self->rxs], len))
+ len = 0;
+ /*Trim off the CRC */
+ if (len > 1)
+ len -= 2;
+ else
+ len = 0;
+ IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+
+#ifdef USE_MIR
+ else if (enable & OBOE_ENABLEH_MIRON)
+ {
+ if (len > 1)
+ len -= 2;
+ else
+ len = 0;
+ IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+#endif
+ else if (enable & OBOE_ENABLEH_FIRON)
+ {
+ if (len > 3)
+ len -= 4; /*FIXME: check this */
+ else
+ len = 0;
+ IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+ else
+ IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
+
+ if (len)
+ {
+ skb = dev_alloc_skb (len + 1);
+ if (skb)
+ {
+ skb_reserve (skb, 1);
+
+ skb_put (skb, len);
+ memcpy (skb->data, self->rx_bufs[self->rxs], len);
+
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons (ETH_P_IRDA);
+ }
+ else
+ {
+ printk (KERN_INFO
+ "%s(), memory squeeze, dropping frame.\n",
+ __FUNCTION__);
+ }
+ }
+ }
+ else
+ {
+ /* TODO: =========================================== */
+ /* if OBOE_CTL_RX_LENGTH, our buffers are too small */
+ /* (MIR or FIR) data is lost. */
+ /* (SIR) data is splitted in several slots. */
+ /* we have to join all the received buffers received */
+ /*in a large buffer before checking CRC. */
+ IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
+ ,len,self->ring->rx[self->rxs].control);
+ }
+
+ self->ring->rx[self->rxs].len = 0x0;
+ self->ring->rx[self->rxs].control = OBOE_CTL_RX_HW_OWNS;
+
+ self->rxs++;
+ self->rxs %= RX_SLOTS;
+
+ if (skb)
+ netif_rx (skb);
+
+ }
+ }
+
+ if (irqstat & OBOE_INT_TXUNDER)
+ {
+ printk (KERN_WARNING DRIVER_NAME ": tx fifo underflow\n");
+ }
+ if (irqstat & OBOE_INT_RXOVER)
+ {
+ printk (KERN_WARNING DRIVER_NAME ": rx fifo overflow\n");
+ }
+/* This must be useful for something... */
+ if (irqstat & OBOE_INT_SIP)
+ {
+ self->int_sip++;
+ IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
+ ,self->int_sip,irqstat,self->txpending);
+ }
+ return IRQ_HANDLED;
+}
+
+
+static int
+toshoboe_net_open (struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT (dev != NULL, return -1; );
+ self = (struct toshoboe_cb *) dev->priv;
+
+ IRDA_ASSERT (self != NULL, return 0; );
+
+ if (self->async)
+ return -EBUSY;
+
+ if (self->stopped)
+ return 0;
+
+ if (request_irq (self->io.irq, toshoboe_interrupt,
+ SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
+ {
+ return -EAGAIN;
+ }
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open (dev, &self->qos, driver_name);
+
+ self->irdad = 1;
+
+ return 0;
+}
+
+static int
+toshoboe_net_close (struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT (dev != NULL, return -1; );
+ self = (struct toshoboe_cb *) dev->priv;
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close (self->irlap);
+ self->irlap = NULL;
+
+ self->irdad = 0;
+
+ free_irq (self->io.irq, (void *) self);
+
+ if (!self->stopped)
+ {
+ toshoboe_stopchip (self);
+ }
+
+ return 0;
+}
+
+/*
+ * Function toshoboe_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int
+toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct toshoboe_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT (dev != NULL, return -1; );
+
+ self = dev->priv;
+
+ IRDA_ASSERT (self != NULL, return -1; );
+
+ IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ switch (cmd)
+ {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ /* This function will also be used by IrLAP to change the
+ * speed, so we still must allow for speed change within
+ * interrupt context.
+ */
+ IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
+ if (!in_interrupt () && !capable (CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* self->speed=irq->ifr_baudrate; */
+ /* toshoboe_setbaud(self); */
+ /* Just change speed once - inserted by Paul Bristow */
+ self->new_speed = irq->ifr_baudrate;
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
+ if (!capable (CAP_NET_ADMIN))
+ return -EPERM;
+ irda_device_set_media_busy (self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
+ IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
+ break;
+ default:
+ IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+ ret = -EOPNOTSUPP;
+ }
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return ret;
+
+}
+
+MODULE_DESCRIPTION("Toshiba OBOE IrDA Device Driver");
+MODULE_AUTHOR("James McKenzie <james@fishsoup.dhs.org>");
+MODULE_LICENSE("GPL");
+
+module_param (max_baud, int, 0);
+MODULE_PARM_DESC(max_baud, "Maximum baud rate");
+
+#ifdef USE_PROBE
+module_param (do_probe, bool, 0);
+MODULE_PARM_DESC(do_probe, "Enable/disable chip probing and self-test");
+#endif
+
+static void
+toshoboe_close (struct pci_dev *pci_dev)
+{
+ int i;
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT (self != NULL, return; );
+
+ if (!self->stopped)
+ {
+ toshoboe_stopchip (self);
+ }
+
+ release_region (self->io.fir_base, self->io.fir_ext);
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ kfree (self->tx_bufs[i]);
+ self->tx_bufs[i] = NULL;
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ kfree (self->rx_bufs[i]);
+ self->rx_bufs[i] = NULL;
+ }
+
+ unregister_netdev(self->netdev);
+
+ kfree (self->ringbuf);
+ self->ringbuf = NULL;
+ self->ring = NULL;
+
+ free_netdev(self->netdev);
+}
+
+static int
+toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
+{
+ struct toshoboe_cb *self;
+ struct net_device *dev;
+ int i = 0;
+ int ok = 0;
+ int err;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if ((err=pci_enable_device(pci_dev)))
+ return err;
+
+ dev = alloc_irdadev(sizeof (struct toshoboe_cb));
+ if (dev == NULL)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate memory for "
+ "IrDA control block\n");
+ return -ENOMEM;
+ }
+
+ self = dev->priv;
+ self->netdev = dev;
+ self->pdev = pci_dev;
+ self->base = pci_resource_start(pci_dev,0);
+
+ self->io.fir_base = self->base;
+ self->io.fir_ext = OBOE_IO_EXTENT;
+ self->io.irq = pci_dev->irq;
+ self->io.irqflags = SA_SHIRQ | SA_INTERRUPT;
+
+ self->speed = self->io.speed = 9600;
+ self->async = 0;
+
+ /* Lock the port that we need */
+ if (NULL==request_region (self->io.fir_base, self->io.fir_ext, driver_name))
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't get iobase of 0x%03x\n"
+ ,self->io.fir_base);
+ err = -EBUSY;
+ goto freeself;
+ }
+
+ spin_lock_init(&self->spinlock);
+
+ irda_init_max_qos_capabilies (&self->qos);
+ self->qos.baud_rate.bits = 0;
+
+ if (max_baud >= 2400)
+ self->qos.baud_rate.bits |= IR_2400;
+ /*if (max_baud>=4800) idev->qos.baud_rate.bits|=IR_4800; */
+ if (max_baud >= 9600)
+ self->qos.baud_rate.bits |= IR_9600;
+ if (max_baud >= 19200)
+ self->qos.baud_rate.bits |= IR_19200;
+ if (max_baud >= 115200)
+ self->qos.baud_rate.bits |= IR_115200;
+#ifdef USE_MIR
+ if (max_baud >= 1152000)
+ {
+ self->qos.baud_rate.bits |= IR_1152000;
+ }
+#endif
+ if (max_baud >= 4000000)
+ {
+ self->qos.baud_rate.bits |= (IR_4000000 << 8);
+ }
+
+ /*FIXME: work this out... */
+ self->qos.min_turn_time.bits = 0xff;
+
+ irda_qos_bits_to_value (&self->qos);
+
+ /* Allocate twice the size to guarantee alignment */
+ self->ringbuf = (void *) kmalloc (OBOE_RING_LEN << 1, GFP_KERNEL);
+ if (!self->ringbuf)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate DMA buffers\n");
+ err = -ENOMEM;
+ goto freeregion;
+ }
+
+#if (BITS_PER_LONG == 64)
+#error broken on 64-bit: casts pointer to 32-bit, and then back to pointer.
+#endif
+
+ /*We need to align the taskfile on a taskfile size boundary */
+ {
+ unsigned long addr;
+
+ addr = (__u32) self->ringbuf;
+ addr &= ~(OBOE_RING_LEN - 1);
+ addr += OBOE_RING_LEN;
+ self->ring = (struct OboeRing *) addr;
+ }
+
+ memset (self->ring, 0, OBOE_RING_LEN);
+ self->io.mem_base = (__u32) self->ring;
+
+ ok = 1;
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ self->tx_bufs[i] = kmalloc (TX_BUF_SZ, GFP_KERNEL);
+ if (!self->tx_bufs[i])
+ ok = 0;
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ self->rx_bufs[i] = kmalloc (RX_BUF_SZ, GFP_KERNEL);
+ if (!self->rx_bufs[i])
+ ok = 0;
+ }
+
+ if (!ok)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate rx/tx buffers\n");
+ err = -ENOMEM;
+ goto freebufs;
+ }
+
+
+#ifdef USE_PROBE
+ if (do_probe)
+ if (!toshoboe_probe (self))
+ {
+ err = -ENODEV;
+ goto freebufs;
+ }
+#endif
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pci_dev->dev);
+ dev->hard_start_xmit = toshoboe_hard_xmit;
+ dev->open = toshoboe_net_open;
+ dev->stop = toshoboe_net_close;
+ dev->do_ioctl = toshoboe_net_ioctl;
+
+ err = register_netdev(dev);
+ if (err)
+ {
+ printk (KERN_ERR DRIVER_NAME ": register_netdev() failed\n");
+ err = -ENOMEM;
+ goto freebufs;
+ }
+ printk (KERN_INFO "IrDA: Registered device %s\n", dev->name);
+
+ pci_set_drvdata(pci_dev,self);
+
+ printk (KERN_INFO DRIVER_NAME ": Using multiple tasks, version %s\n", rcsid);
+
+ return 0;
+
+freebufs:
+ for (i = 0; i < TX_SLOTS; ++i)
+ if (self->tx_bufs[i])
+ kfree (self->tx_bufs[i]);
+ for (i = 0; i < RX_SLOTS; ++i)
+ if (self->rx_bufs[i])
+ kfree (self->rx_bufs[i]);
+ kfree(self->ringbuf);
+
+freeregion:
+ release_region (self->io.fir_base, self->io.fir_ext);
+
+freeself:
+ free_netdev(dev);
+
+ return err;
+}
+
+static int
+toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+ unsigned long flags;
+ int i = 10;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (!self || self->stopped)
+ return 0;
+
+ if ((!self->irdad) && (!self->async))
+ return 0;
+
+/* Flush all packets */
+ while ((i--) && (self->txpending))
+ udelay (10000);
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ toshoboe_stopchip (self);
+ self->stopped = 1;
+ self->txpending = 0;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return 0;
+}
+
+static int
+toshoboe_wakeup (struct pci_dev *pci_dev)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (!self || !self->stopped)
+ return 0;
+
+ if ((!self->irdad) && (!self->async))
+ return 0;
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ toshoboe_startchip (self);
+ self->stopped = 0;
+
+ netif_wake_queue(self->netdev);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return 0;
+}
+
+static struct pci_driver donauboe_pci_driver = {
+ .name = "donauboe",
+ .id_table = toshoboe_pci_tbl,
+ .probe = toshoboe_open,
+ .remove = toshoboe_close,
+ .suspend = toshoboe_gotosleep,
+ .resume = toshoboe_wakeup
+};
+
+static int __init
+donauboe_init (void)
+{
+ return pci_module_init(&donauboe_pci_driver);
+}
+
+static void __exit
+donauboe_cleanup (void)
+{
+ pci_unregister_driver(&donauboe_pci_driver);
+}
+
+module_init(donauboe_init);
+module_exit(donauboe_cleanup);
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
new file mode 100644
index 000000000000..2ab173d9a0e4
--- /dev/null
+++ b/drivers/net/irda/donauboe.h
@@ -0,0 +1,363 @@
+/*********************************************************************
+ *
+ * Filename: toshoboe.h
+ * Version: 2.16
+ * Description: Driver for the Toshiba OBOE (or type-O or 701)
+ * FIR Chipset, also supports the DONAUOBOE (type-DO
+ * or d01) FIR chipset which as far as I know is
+ * register compatible.
+ * Status: Experimental.
+ * Author: James McKenzie <james@fishsoup.dhs.org>
+ * Created at: Sat May 8 12:35:27 1999
+ * Modified: 2.16 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers)
+ * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks)
+ *
+ * Copyright (c) 1999 James McKenzie, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither James McKenzie nor Cambridge University admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Applicable Models : Libretto 100/110CT and many more.
+ * Toshiba refers to this chip as the type-O IR port,
+ * or the type-DO IR port.
+ *
+ * IrDA chip set list from Toshiba Computer Engineering Corp.
+ * model method maker controler Version
+ * Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
+ * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 3020CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 7020CT FIR,SIR ? ?
+ *
+ * Satell. 4090XCDT FIR,SIR ? ?
+ *
+ * Libretto 100CT FIR,SIR Toshiba Oboe
+ * Libretto 1000CT FIR,SIR Toshiba Oboe
+ *
+ * TECRA750DVD FIR,SIR Toshiba Oboe(Triangle) REV ID=14h
+ * TECRA780 FIR,SIR Toshiba Oboe(Sandlot) REV ID=32h,33h
+ * TECRA750CDT FIR,SIR Toshiba Oboe(Triangle) REV ID=13h,14h
+ * TECRA8000 FIR,SIR Toshiba Oboe(ISKUR) REV ID=23h
+ *
+ ********************************************************************/
+
+/* The documentation for this chip is allegedly released */
+/* However I have not seen it, not have I managed to contact */
+/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
+/* the documentation for this is freely available at */
+/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* The mapping between the registers in that document and the */
+/* Registers in the 701 oboe chip are as follows */
+
+
+/* 3922 reg 701 regs, by bit numbers */
+/* 7- 0 15- 8 24-16 31-25 */
+/* $28 0x0 0x1 */
+/* $2c SEE NOTE 1 */
+/* $30 0x6 0x7 */
+/* $34 0x8 0x9 SEE NOTE 2 */
+/* $38 0x10 0x11 */
+/* $3C 0xe SEE NOTE 3 */
+/* $40 0x12 0x13 */
+/* $44 0x14 0x15 */
+/* $48 0x16 0x17 */
+/* $4c 0x18 0x19 */
+/* $50 0x1a 0x1b */
+
+/* FIXME: could be 0x1b 0x1a here */
+
+/* $54 0x1d 0x1c */
+/* $5C 0xf SEE NOTE 4 */
+/* $130 SEE NOTE 5 */
+/* $134 SEE NOTE 6 */
+/* */
+/* NOTES: */
+/* 1. The pointer to ring is packed in most unceremoniusly */
+/* 701 Register Address bits (A9-A0 must be zero) */
+/* 0x4: A17 A16 A15 A14 A13 A12 A11 A10 */
+/* 0x5: A25 A24 A23 A22 A21 A20 A19 A18 */
+/* 0x2: 0 0 A31 A30 A29 A28 A27 A26 */
+/* */
+/* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922 */
+/* documentation would suggest that a write of 0x1 to 0x8 */
+/* would be more appropriate. */
+/* */
+/* 3. This assignment is tenuous at best, register 0xe seems to */
+/* have bits arranged 0 0 0 R/W R/W R/W R/W R/W */
+/* if either of the lower two bits are set the chip seems to */
+/* switch off */
+/* */
+/* 4. Bits 7-4 seem to be different 4 seems just to be generic */
+/* receiver busy flag */
+/* */
+/* 5. and 6. The IER and ISR have a different bit assignment */
+/* The lower three bits of both read back as ones */
+/* ISR is register 0xc, IER is register 0xd */
+/* 7 6 5 4 3 2 1 0 */
+/* 0xc: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
+/* 0xd: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
+/* TxDone xmitt done (generated only if generate interrupt bit */
+/* is set in the ring) */
+/* RxDone recv completed (or other recv condition if you set it */
+/* up */
+/* TxUnder underflow in Transmit FIFO */
+/* RxOver overflow in Recv FIFO */
+/* SipRcv received serial gap (or other condition you set) */
+/* Interrupts are enabled by writing a one to the IER register */
+/* Interrupts are cleared by writting a one to the ISR register */
+/* */
+/* 6. The remaining registers: 0x6 and 0x3 appear to be */
+/* reserved parts of 16 or 32 bit registersthe remainder */
+/* 0xa 0xb 0x1e 0x1f could possibly be (by their behaviour) */
+/* the Unicast Filter register at $58. */
+/* */
+/* 7. While the core obviously expects 32 bit accesses all the */
+/* M$ drivers do 8 bit accesses, infact the Miniport ones */
+/* write and read back the byte serveral times (why?) */
+
+
+#ifndef TOSHOBOE_H
+#define TOSHOBOE_H
+
+/* Registers */
+
+#define OBOE_IO_EXTENT 0x1f
+
+/*Receive and transmit slot pointers */
+#define OBOE_REG(i) (i+(self->base))
+#define OBOE_RXSLOT OBOE_REG(0x0)
+#define OBOE_TXSLOT OBOE_REG(0x1)
+#define OBOE_SLOT_MASK 0x3f
+
+#define OBOE_TXRING_OFFSET 0x200
+#define OBOE_TXRING_OFFSET_IN_SLOTS 0x40
+
+/*pointer to the ring */
+#define OBOE_RING_BASE0 OBOE_REG(0x4)
+#define OBOE_RING_BASE1 OBOE_REG(0x5)
+#define OBOE_RING_BASE2 OBOE_REG(0x2)
+#define OBOE_RING_BASE3 OBOE_REG(0x3)
+
+/*Number of slots in the ring */
+#define OBOE_RING_SIZE OBOE_REG(0x7)
+#define OBOE_RING_SIZE_RX4 0x00
+#define OBOE_RING_SIZE_RX8 0x01
+#define OBOE_RING_SIZE_RX16 0x03
+#define OBOE_RING_SIZE_RX32 0x07
+#define OBOE_RING_SIZE_RX64 0x0f
+#define OBOE_RING_SIZE_TX4 0x00
+#define OBOE_RING_SIZE_TX8 0x10
+#define OBOE_RING_SIZE_TX16 0x30
+#define OBOE_RING_SIZE_TX32 0x70
+#define OBOE_RING_SIZE_TX64 0xf0
+
+#define OBOE_RING_MAX_SIZE 64
+
+/*Causes the gubbins to re-examine the ring */
+#define OBOE_PROMPT OBOE_REG(0x9)
+#define OBOE_PROMPT_BIT 0x1
+
+/* Interrupt Status Register */
+#define OBOE_ISR OBOE_REG(0xc)
+/* Interrupt Enable Register */
+#define OBOE_IER OBOE_REG(0xd)
+/* Interrupt bits for IER and ISR */
+#define OBOE_INT_TXDONE 0x80
+#define OBOE_INT_RXDONE 0x40
+#define OBOE_INT_TXUNDER 0x20
+#define OBOE_INT_RXOVER 0x10
+#define OBOE_INT_SIP 0x08
+#define OBOE_INT_MASK 0xf8
+
+/*Reset Register */
+#define OBOE_CONFIG1 OBOE_REG(0xe)
+#define OBOE_CONFIG1_RST 0x01
+#define OBOE_CONFIG1_DISABLE 0x02
+#define OBOE_CONFIG1_4 0x08
+#define OBOE_CONFIG1_8 0x08
+
+#define OBOE_CONFIG1_ON 0x8
+#define OBOE_CONFIG1_RESET 0xf
+#define OBOE_CONFIG1_OFF 0xe
+
+#define OBOE_STATUS OBOE_REG(0xf)
+#define OBOE_STATUS_RXBUSY 0x10
+#define OBOE_STATUS_FIRRX 0x04
+#define OBOE_STATUS_MIRRX 0x02
+#define OBOE_STATUS_SIRRX 0x01
+
+
+/*Speed control registers */
+#define OBOE_CONFIG0L OBOE_REG(0x10)
+#define OBOE_CONFIG0H OBOE_REG(0x11)
+
+#define OBOE_CONFIG0H_TXONLOOP 0x80 /*Transmit when looping (dangerous) */
+#define OBOE_CONFIG0H_LOOP 0x40 /*Loopback Tx->Rx */
+#define OBOE_CONFIG0H_ENTX 0x10 /*Enable Tx */
+#define OBOE_CONFIG0H_ENRX 0x08 /*Enable Rx */
+#define OBOE_CONFIG0H_ENDMAC 0x04 /*Enable/reset* the DMA controller */
+#define OBOE_CONFIG0H_RCVANY 0x02 /*DMA mode 1=bytes, 0=dwords */
+
+#define OBOE_CONFIG0L_CRC16 0x80 /*CRC 1=16 bit 0=32 bit */
+#define OBOE_CONFIG0L_ENFIR 0x40 /*Enable FIR */
+#define OBOE_CONFIG0L_ENMIR 0x20 /*Enable MIR */
+#define OBOE_CONFIG0L_ENSIR 0x10 /*Enable SIR */
+#define OBOE_CONFIG0L_ENSIRF 0x08 /*Enable SIR framer */
+#define OBOE_CONFIG0L_SIRTEST 0x04 /*Enable SIR framer in MIR and FIR */
+#define OBOE_CONFIG0L_INVERTTX 0x02 /*Invert Tx Line */
+#define OBOE_CONFIG0L_INVERTRX 0x01 /*Invert Rx Line */
+
+#define OBOE_BOF OBOE_REG(0x12)
+#define OBOE_EOF OBOE_REG(0x13)
+
+#define OBOE_ENABLEL OBOE_REG(0x14)
+#define OBOE_ENABLEH OBOE_REG(0x15)
+
+#define OBOE_ENABLEH_PHYANDCLOCK 0x80 /*Toggle low to copy config in */
+#define OBOE_ENABLEH_CONFIGERR 0x40
+#define OBOE_ENABLEH_FIRON 0x20
+#define OBOE_ENABLEH_MIRON 0x10
+#define OBOE_ENABLEH_SIRON 0x08
+#define OBOE_ENABLEH_ENTX 0x04
+#define OBOE_ENABLEH_ENRX 0x02
+#define OBOE_ENABLEH_CRC16 0x01
+
+#define OBOE_ENABLEL_BROADCAST 0x01
+
+#define OBOE_CURR_PCONFIGL OBOE_REG(0x16) /*Current config */
+#define OBOE_CURR_PCONFIGH OBOE_REG(0x17)
+
+#define OBOE_NEW_PCONFIGL OBOE_REG(0x18)
+#define OBOE_NEW_PCONFIGH OBOE_REG(0x19)
+
+#define OBOE_PCONFIGH_BAUDMASK 0xfc
+#define OBOE_PCONFIGH_WIDTHMASK 0x04
+#define OBOE_PCONFIGL_WIDTHMASK 0xe0
+#define OBOE_PCONFIGL_PREAMBLEMASK 0x1f
+
+#define OBOE_PCONFIG_BAUDMASK 0xfc00
+#define OBOE_PCONFIG_BAUDSHIFT 10
+#define OBOE_PCONFIG_WIDTHMASK 0x04e0
+#define OBOE_PCONFIG_WIDTHSHIFT 5
+#define OBOE_PCONFIG_PREAMBLEMASK 0x001f
+#define OBOE_PCONFIG_PREAMBLESHIFT 0
+
+#define OBOE_MAXLENL OBOE_REG(0x1a)
+#define OBOE_MAXLENH OBOE_REG(0x1b)
+
+#define OBOE_RXCOUNTH OBOE_REG(0x1c) /*Reset on recipt */
+#define OBOE_RXCOUNTL OBOE_REG(0x1d) /*of whole packet */
+
+/* The PCI ID of the OBOE chip */
+#ifndef PCI_DEVICE_ID_FIR701
+#define PCI_DEVICE_ID_FIR701 0x0701
+#endif
+
+#ifndef PCI_DEVICE_ID_FIRD01
+#define PCI_DEVICE_ID_FIRD01 0x0d01
+#endif
+
+struct OboeSlot
+{
+ __u16 len; /*Tweleve bits of packet length */
+ __u8 unused;
+ __u8 control; /*Slot control/status see below */
+ __u32 address; /*Slot buffer address */
+}
+__attribute__ ((packed));
+
+#define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS
+
+struct OboeRing
+{
+ struct OboeSlot rx[OBOE_NTASKS];
+ struct OboeSlot tx[OBOE_NTASKS];
+};
+
+#define OBOE_RING_LEN (sizeof(struct OboeRing))
+
+
+#define OBOE_CTL_TX_HW_OWNS 0x80 /*W/R This slot owned by the hardware */
+#define OBOE_CTL_TX_DISTX_CRC 0x40 /*W Disable CRC generation for [FM]IR */
+#define OBOE_CTL_TX_BAD_CRC 0x20 /*W Generate bad CRC */
+#define OBOE_CTL_TX_SIP 0x10 /*W Generate an SIP after xmittion */
+#define OBOE_CTL_TX_MKUNDER 0x08 /*W Generate an underrun error */
+#define OBOE_CTL_TX_RTCENTX 0x04 /*W Enable receiver and generate TXdone */
+ /* After this slot is processed */
+#define OBOE_CTL_TX_UNDER 0x01 /*R Set by hardware to indicate underrun */
+
+
+#define OBOE_CTL_RX_HW_OWNS 0x80 /*W/R This slot owned by hardware */
+#define OBOE_CTL_RX_PHYERR 0x40 /*R Decoder error on receiption */
+#define OBOE_CTL_RX_CRCERR 0x20 /*R CRC error only set for [FM]IR */
+#define OBOE_CTL_RX_LENGTH 0x10 /*R Packet > max Rx length */
+#define OBOE_CTL_RX_OVER 0x08 /*R set to indicate an overflow */
+#define OBOE_CTL_RX_SIRBAD 0x04 /*R SIR had BOF in packet or ABORT sequence */
+#define OBOE_CTL_RX_RXEOF 0x02 /*R Finished receiving on this slot */
+
+
+struct toshoboe_cb
+{
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+ struct tty_driver ttydev;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+
+ chipio_t io; /* IrDA controller information */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ __u32 flags; /* Interface flags */
+
+ struct pci_dev *pdev; /*PCI device */
+ int base; /*IO base */
+
+
+ int txpending; /*how many tx's are pending */
+ int txs, rxs; /*Which slots are we at */
+
+ int irdad; /*Driver under control of netdev end */
+ int async; /*Driver under control of async end */
+
+
+ int stopped; /*Stopped by some or other APM stuff */
+
+ int filter; /*In SIR mode do we want to receive
+ frames or byte ranges */
+
+ void *ringbuf; /*The ring buffer */
+ struct OboeRing *ring; /*The ring */
+
+ void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers */
+ void *rx_bufs[OBOE_RING_MAX_SIZE];
+
+
+ int speed; /*Current setting of the speed */
+ int new_speed; /*Set to request a speed change */
+
+/* The spinlock protect critical parts of the driver.
+ * Locking is done like this :
+ * spin_lock_irqsave(&self->spinlock, flags);
+ * Releasing the lock :
+ * spin_unlock_irqrestore(&self->spinlock, flags);
+ */
+ spinlock_t spinlock;
+ /* Used for the probe and diagnostics code */
+ int int_rx;
+ int int_tx;
+ int int_txunder;
+ int int_rxover;
+ int int_sip;
+};
+
+
+#endif
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
new file mode 100644
index 000000000000..31896262d21c
--- /dev/null
+++ b/drivers/net/irda/ep7211_ir.c
@@ -0,0 +1,122 @@
+/*
+ * IR port driver for the Cirrus Logic EP7211 processor.
+ *
+ * Copyright 2001, Blue Mug Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
+#define MAX_DELAY 10000 /* 1 ms */
+
+static void ep7211_ir_open(dongle_t *self, struct qos_info *qos);
+static void ep7211_ir_close(dongle_t *self);
+static int ep7211_ir_change_speed(struct irda_task *task);
+static int ep7211_ir_reset(struct irda_task *task);
+
+static struct dongle_reg dongle = {
+ .type = IRDA_EP7211_IR,
+ .open = ep7211_ir_open,
+ .close = ep7211_ir_close,
+ .reset = ep7211_ir_reset,
+ .change_speed = ep7211_ir_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
+{
+ unsigned int syscon1, flags;
+
+ save_flags(flags); cli();
+
+ /* Turn on the SIR encoder. */
+ syscon1 = clps_readl(SYSCON1);
+ syscon1 |= SYSCON1_SIREN;
+ clps_writel(syscon1, SYSCON1);
+
+ /* XXX: We should disable modem status interrupts on the first
+ UART (interrupt #14). */
+
+ restore_flags(flags);
+}
+
+static void ep7211_ir_close(dongle_t *self)
+{
+ unsigned int syscon1, flags;
+
+ save_flags(flags); cli();
+
+ /* Turn off the SIR encoder. */
+ syscon1 = clps_readl(SYSCON1);
+ syscon1 &= ~SYSCON1_SIREN;
+ clps_writel(syscon1, SYSCON1);
+
+ /* XXX: If we've disabled the modem status interrupts, we should
+ reset them back to their original state. */
+
+ restore_flags(flags);
+}
+
+/*
+ * Function ep7211_ir_change_speed (task)
+ *
+ * Change speed of the EP7211 I/R port. We don't really have to do anything
+ * for the EP7211 as long as the rate is being changed at the serial port
+ * level.
+ */
+static int ep7211_ir_change_speed(struct irda_task *task)
+{
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ return 0;
+}
+
+/*
+ * Function ep7211_ir_reset (task)
+ *
+ * Reset the EP7211 I/R. We don't really have to do anything.
+ *
+ */
+static int ep7211_ir_reset(struct irda_task *task)
+{
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ return 0;
+}
+
+/*
+ * Function ep7211_ir_init(void)
+ *
+ * Initialize EP7211 I/R module
+ *
+ */
+static int __init ep7211_ir_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+/*
+ * Function ep7211_ir_cleanup(void)
+ *
+ * Cleanup EP7211 I/R module
+ *
+ */
+static void __exit ep7211_ir_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+MODULE_AUTHOR("Jon McClintock <jonm@bluemug.com>");
+MODULE_DESCRIPTION("EP7211 I/R driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-8"); /* IRDA_EP7211_IR */
+
+module_init(ep7211_ir_init);
+module_exit(ep7211_ir_cleanup);
diff --git a/drivers/net/irda/esi-sir.c b/drivers/net/irda/esi-sir.c
new file mode 100644
index 000000000000..a908df7c4b9d
--- /dev/null
+++ b/drivers/net/irda/esi-sir.c
@@ -0,0 +1,159 @@
+/*********************************************************************
+ *
+ * Filename: esi.c
+ * Version: 1.6
+ * Description: Driver for the Extended Systems JetEye PC dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Feb 21 18:54:38 1998
+ * Modified at: Sun Oct 27 22:01:04 2002
+ * Modified by: Martin Diehl <mad@mdiehl.de>
+ *
+ * Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
+ * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
+ * Copyright (c) 2002 Martin Diehl, <mad@mdiehl.de>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int esi_open(struct sir_dev *);
+static int esi_close(struct sir_dev *);
+static int esi_change_speed(struct sir_dev *, unsigned);
+static int esi_reset(struct sir_dev *);
+
+static struct dongle_driver esi = {
+ .owner = THIS_MODULE,
+ .driver_name = "JetEye PC ESI-9680 PC",
+ .type = IRDA_ESI_DONGLE,
+ .open = esi_open,
+ .close = esi_close,
+ .reset = esi_reset,
+ .set_speed = esi_change_speed,
+};
+
+static int __init esi_sir_init(void)
+{
+ return irda_register_dongle(&esi);
+}
+
+static void __exit esi_sir_cleanup(void)
+{
+ irda_unregister_dongle(&esi);
+}
+
+static int esi_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ /* Power up and set dongle to 9600 baud */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
+ qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int esi_close(struct sir_dev *dev)
+{
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function esi_change_speed (task)
+ *
+ * Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
+ * Apparently (see old esi-driver) no delays are needed here...
+ *
+ */
+static int esi_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ int ret = 0;
+ int dtr, rts;
+
+ switch (speed) {
+ case 19200:
+ dtr = TRUE;
+ rts = FALSE;
+ break;
+ case 115200:
+ dtr = rts = TRUE;
+ break;
+ default:
+ ret = -EINVAL;
+ speed = 9600;
+ /* fall through */
+ case 9600:
+ dtr = FALSE;
+ rts = TRUE;
+ break;
+ }
+
+ /* Change speed of dongle */
+ sirdev_set_dtr_rts(dev, dtr, rts);
+ dev->speed = speed;
+
+ return ret;
+}
+
+/*
+ * Function esi_reset (task)
+ *
+ * Reset dongle;
+ *
+ */
+static int esi_reset(struct sir_dev *dev)
+{
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ /* Hm, the old esi-driver left the dongle unpowered relying on
+ * the following speed change to repower. This might work for
+ * the esi because we only need the modem lines. However, now the
+ * general rule is reset must bring the dongle to some working
+ * well-known state because speed change might write to registers.
+ * The old esi-driver didn't any delay here - let's hope it' fine.
+ */
+
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+ dev->speed = 9600;
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
+
+module_init(esi_sir_init);
+module_exit(esi_sir_cleanup);
+
diff --git a/drivers/net/irda/esi.c b/drivers/net/irda/esi.c
new file mode 100644
index 000000000000..d3a61af6402d
--- /dev/null
+++ b/drivers/net/irda/esi.c
@@ -0,0 +1,149 @@
+/*********************************************************************
+ *
+ * Filename: esi.c
+ * Version: 1.5
+ * Description: Driver for the Extended Systems JetEye PC dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Feb 21 18:54:38 1998
+ * Modified at: Fri Dec 17 09:14:04 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
+ * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+static void esi_open(dongle_t *self, struct qos_info *qos);
+static void esi_close(dongle_t *self);
+static int esi_change_speed(struct irda_task *task);
+static int esi_reset(struct irda_task *task);
+
+static struct dongle_reg dongle = {
+ .type = IRDA_ESI_DONGLE,
+ .open = esi_open,
+ .close = esi_close,
+ .reset = esi_reset,
+ .change_speed = esi_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init esi_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit esi_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void esi_open(dongle_t *self, struct qos_info *qos)
+{
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
+ qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+}
+
+static void esi_close(dongle_t *dongle)
+{
+ /* Power off dongle */
+ dongle->set_dtr_rts(dongle->dev, FALSE, FALSE);
+}
+
+/*
+ * Function esi_change_speed (task)
+ *
+ * Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
+ *
+ */
+static int esi_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ int dtr, rts;
+
+ switch (speed) {
+ case 19200:
+ dtr = TRUE;
+ rts = FALSE;
+ break;
+ case 115200:
+ dtr = rts = TRUE;
+ break;
+ case 9600:
+ default:
+ dtr = FALSE;
+ rts = TRUE;
+ break;
+ }
+
+ /* Change speed of dongle */
+ self->set_dtr_rts(self->dev, dtr, rts);
+ self->speed = speed;
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+/*
+ * Function esi_reset (task)
+ *
+ * Reset dongle;
+ *
+ */
+static int esi_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize ESI module
+ *
+ */
+module_init(esi_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup ESI module
+ *
+ */
+module_exit(esi_cleanup);
+
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
new file mode 100644
index 000000000000..0d2fe87fb9b7
--- /dev/null
+++ b/drivers/net/irda/girbil-sir.c
@@ -0,0 +1,258 @@
+/*********************************************************************
+ *
+ * Filename: girbil.c
+ * Version: 1.2
+ * Description: Implementation for the Greenwich GIrBIL dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Feb 6 21:02:33 1999
+ * Modified at: Fri Dec 17 09:13:20 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int girbil_reset(struct sir_dev *dev);
+static int girbil_open(struct sir_dev *dev);
+static int girbil_close(struct sir_dev *dev);
+static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
+
+/* Control register 1 */
+#define GIRBIL_TXEN 0x01 /* Enable transmitter */
+#define GIRBIL_RXEN 0x02 /* Enable receiver */
+#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
+#define GIRBIL_ECHO 0x08 /* Echo control characters */
+
+/* LED Current Register (0x2) */
+#define GIRBIL_HIGH 0x20
+#define GIRBIL_MEDIUM 0x21
+#define GIRBIL_LOW 0x22
+
+/* Baud register (0x3) */
+#define GIRBIL_2400 0x30
+#define GIRBIL_4800 0x31
+#define GIRBIL_9600 0x32
+#define GIRBIL_19200 0x33
+#define GIRBIL_38400 0x34
+#define GIRBIL_57600 0x35
+#define GIRBIL_115200 0x36
+
+/* Mode register (0x4) */
+#define GIRBIL_IRDA 0x40
+#define GIRBIL_ASK 0x41
+
+/* Control register 2 (0x5) */
+#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
+
+static struct dongle_driver girbil = {
+ .owner = THIS_MODULE,
+ .driver_name = "Greenwich GIrBIL",
+ .type = IRDA_GIRBIL_DONGLE,
+ .open = girbil_open,
+ .close = girbil_close,
+ .reset = girbil_reset,
+ .set_speed = girbil_change_speed,
+};
+
+static int __init girbil_sir_init(void)
+{
+ return irda_register_dongle(&girbil);
+}
+
+static void __exit girbil_sir_cleanup(void)
+{
+ irda_unregister_dongle(&girbil);
+}
+
+static int girbil_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power on dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x03;
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int girbil_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function girbil_change_speed (dev, speed)
+ *
+ * Set the speed for the Girbil type dongle.
+ *
+ */
+
+#define GIRBIL_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1)
+
+static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 control[2];
+ static int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* dongle alread reset - port and dongle at default speed */
+
+ switch(state) {
+
+ case SIRDEV_STATE_DONGLE_SPEED:
+
+ /* Set DTR and Clear RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ udelay(25); /* better wait a little while */
+
+ ret = 0;
+ switch (speed) {
+ default:
+ ret = -EINVAL;
+ /* fall through */
+ case 9600:
+ control[0] = GIRBIL_9600;
+ break;
+ case 19200:
+ control[0] = GIRBIL_19200;
+ break;
+ case 34800:
+ control[0] = GIRBIL_38400;
+ break;
+ case 57600:
+ control[0] = GIRBIL_57600;
+ break;
+ case 115200:
+ control[0] = GIRBIL_115200;
+ break;
+ }
+ control[1] = GIRBIL_LOAD;
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, 2);
+
+ dev->speed = speed;
+
+ state = GIRBIL_STATE_WAIT_SPEED;
+ delay = 100;
+ break;
+
+ case GIRBIL_STATE_WAIT_SPEED:
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ udelay(25); /* better wait a little while */
+ break;
+
+ default:
+ IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+ ret = -EINVAL;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+/*
+ * Function girbil_reset (driver)
+ *
+ * This function resets the girbil dongle.
+ *
+ * Algorithm:
+ * 0. set RTS, and wait at least 5 ms
+ * 1. clear RTS
+ */
+
+
+#define GIRBIL_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET + 1)
+#define GIRBIL_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET + 2)
+#define GIRBIL_STATE_WAIT3_RESET (SIRDEV_STATE_DONGLE_RESET + 3)
+
+static int girbil_reset(struct sir_dev *dev)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ switch (state) {
+ case SIRDEV_STATE_DONGLE_RESET:
+ /* Reset dongle */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ /* Sleep at least 5 ms */
+ delay = 20;
+ state = GIRBIL_STATE_WAIT1_RESET;
+ break;
+
+ case GIRBIL_STATE_WAIT1_RESET:
+ /* Set DTR and clear RTS to enter command mode */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+ delay = 20;
+ state = GIRBIL_STATE_WAIT2_RESET;
+ break;
+
+ case GIRBIL_STATE_WAIT2_RESET:
+ /* Write control byte */
+ sirdev_raw_write(dev, &control, 1);
+ delay = 20;
+ state = GIRBIL_STATE_WAIT3_RESET;
+ break;
+
+ case GIRBIL_STATE_WAIT3_RESET:
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ dev->speed = 9600;
+ break;
+
+ default:
+ IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+ ret = -1;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
+
+module_init(girbil_sir_init);
+module_exit(girbil_sir_cleanup);
diff --git a/drivers/net/irda/girbil.c b/drivers/net/irda/girbil.c
new file mode 100644
index 000000000000..248aeb0c726c
--- /dev/null
+++ b/drivers/net/irda/girbil.c
@@ -0,0 +1,250 @@
+/*********************************************************************
+ *
+ * Filename: girbil.c
+ * Version: 1.2
+ * Description: Implementation for the Greenwich GIrBIL dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Feb 6 21:02:33 1999
+ * Modified at: Fri Dec 17 09:13:20 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+static int girbil_reset(struct irda_task *task);
+static void girbil_open(dongle_t *self, struct qos_info *qos);
+static void girbil_close(dongle_t *self);
+static int girbil_change_speed(struct irda_task *task);
+
+/* Control register 1 */
+#define GIRBIL_TXEN 0x01 /* Enable transmitter */
+#define GIRBIL_RXEN 0x02 /* Enable receiver */
+#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
+#define GIRBIL_ECHO 0x08 /* Echo control characters */
+
+/* LED Current Register (0x2) */
+#define GIRBIL_HIGH 0x20
+#define GIRBIL_MEDIUM 0x21
+#define GIRBIL_LOW 0x22
+
+/* Baud register (0x3) */
+#define GIRBIL_2400 0x30
+#define GIRBIL_4800 0x31
+#define GIRBIL_9600 0x32
+#define GIRBIL_19200 0x33
+#define GIRBIL_38400 0x34
+#define GIRBIL_57600 0x35
+#define GIRBIL_115200 0x36
+
+/* Mode register (0x4) */
+#define GIRBIL_IRDA 0x40
+#define GIRBIL_ASK 0x41
+
+/* Control register 2 (0x5) */
+#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
+
+static struct dongle_reg dongle = {
+ .type = IRDA_GIRBIL_DONGLE,
+ .open = girbil_open,
+ .close = girbil_close,
+ .reset = girbil_reset,
+ .change_speed = girbil_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init girbil_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit girbil_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void girbil_open(dongle_t *self, struct qos_info *qos)
+{
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x03;
+}
+
+static void girbil_close(dongle_t *self)
+{
+ /* Power off dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function girbil_change_speed (dev, speed)
+ *
+ * Set the speed for the Girbil type dongle.
+ *
+ */
+static int girbil_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ __u8 control[2];
+ int ret = 0;
+
+ self->speed_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Need to reset the dongle and go to 9600 bps before
+ programming */
+ if (irda_task_execute(self, girbil_reset, NULL, task,
+ (void *) speed))
+ {
+ /* Dongle need more time to reset */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* Give reset 1 sec to finish */
+ ret = msecs_to_jiffies(1000);
+ }
+ break;
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), resetting dongle timed out!\n",
+ __FUNCTION__);
+ ret = -1;
+ break;
+ case IRDA_TASK_CHILD_DONE:
+ /* Set DTR and Clear RTS to enter command mode */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+
+ switch (speed) {
+ case 9600:
+ default:
+ control[0] = GIRBIL_9600;
+ break;
+ case 19200:
+ control[0] = GIRBIL_19200;
+ break;
+ case 34800:
+ control[0] = GIRBIL_38400;
+ break;
+ case 57600:
+ control[0] = GIRBIL_57600;
+ break;
+ case 115200:
+ control[0] = GIRBIL_115200;
+ break;
+ }
+ control[1] = GIRBIL_LOAD;
+
+ /* Write control bytes */
+ self->write(self->dev, control, 2);
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+ ret = msecs_to_jiffies(100);
+ break;
+ case IRDA_TASK_WAIT:
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function girbil_reset (driver)
+ *
+ * This function resets the girbil dongle.
+ *
+ * Algorithm:
+ * 0. set RTS, and wait at least 5 ms
+ * 1. clear RTS
+ */
+static int girbil_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
+ int ret = 0;
+
+ self->reset_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Reset dongle */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+ /* Sleep at least 5 ms */
+ ret = msecs_to_jiffies(20);
+ break;
+ case IRDA_TASK_WAIT1:
+ /* Set DTR and clear RTS to enter command mode */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+ ret = msecs_to_jiffies(20);
+ break;
+ case IRDA_TASK_WAIT2:
+ /* Write control byte */
+ self->write(self->dev, &control, 1);
+ irda_task_next_state(task, IRDA_TASK_WAIT3);
+ ret = msecs_to_jiffies(20);
+ break;
+ case IRDA_TASK_WAIT3:
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Girbil module
+ *
+ */
+module_init(girbil_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Girbil module
+ *
+ */
+module_exit(girbil_cleanup);
+
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
new file mode 100644
index 000000000000..46e0022d3258
--- /dev/null
+++ b/drivers/net/irda/irda-usb.c
@@ -0,0 +1,1602 @@
+/*****************************************************************************
+ *
+ * Filename: irda-usb.c
+ * Version: 0.9b
+ * Description: IrDA-USB Driver
+ * Status: Experimental
+ * Author: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+ * Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+ * Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+/*
+ * IMPORTANT NOTE
+ * --------------
+ *
+ * As of kernel 2.5.20, this is the state of compliance and testing of
+ * this driver (irda-usb) with regards to the USB low level drivers...
+ *
+ * This driver has been tested SUCCESSFULLY with the following drivers :
+ * o usb-uhci-hcd (For Intel/Via USB controllers)
+ * o uhci-hcd (Alternate/JE driver for Intel/Via USB controllers)
+ * o ohci-hcd (For other USB controllers)
+ *
+ * This driver has NOT been tested with the following drivers :
+ * o ehci-hcd (USB 2.0 controllers)
+ *
+ * Note that all HCD drivers do URB_ZERO_PACKET and timeout properly,
+ * so we don't have to worry about that anymore.
+ * One common problem is the failure to set the address on the dongle,
+ * but this happens before the driver gets loaded...
+ *
+ * Jean II
+ */
+
+/*------------------------------------------------------------------*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/usb.h>
+
+#include "irda-usb.h"
+
+/*------------------------------------------------------------------*/
+
+static int qos_mtt_bits = 0;
+
+/* These are the currently known IrDA USB dongles. Add new dongles here */
+static struct usb_device_id dongles[] = {
+ /* ACTiSYS Corp., ACT-IR2000U FIR-USB Adapter */
+ { USB_DEVICE(0x9c4, 0x011), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* Look like ACTiSYS, Report : IBM Corp., IBM UltraPort IrDA */
+ { USB_DEVICE(0x4428, 0x012), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* KC Technology Inc., KC-180 USB IrDA Device */
+ { USB_DEVICE(0x50f, 0x180), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
+ { USB_DEVICE(0x8e9, 0x100), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_APP_SPEC,
+ .bInterfaceSubClass = USB_CLASS_IRDA,
+ .driver_info = IUC_DEFAULT, },
+ { }, /* The end */
+};
+
+/*
+ * Important note :
+ * Devices based on the SigmaTel chipset (0x66f, 0x4200) are not designed
+ * using the "USB-IrDA specification" (yes, there exist such a thing), and
+ * therefore not supported by this driver (don't add them above).
+ * There is a Linux driver, stir4200, that support those USB devices.
+ * Jean II
+ */
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+/*------------------------------------------------------------------*/
+
+static struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf);
+static void irda_usb_disconnect(struct usb_interface *intf);
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self);
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static int irda_usb_open(struct irda_usb_cb *self);
+static void irda_usb_close(struct irda_usb_cb *self);
+static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs);
+static void write_bulk_callback(struct urb *urb, struct pt_regs *regs);
+static void irda_usb_receive(struct urb *urb, struct pt_regs *regs);
+static int irda_usb_net_open(struct net_device *dev);
+static int irda_usb_net_close(struct net_device *dev);
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void irda_usb_net_timeout(struct net_device *dev);
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev);
+
+/************************ TRANSMIT ROUTINES ************************/
+/*
+ * Receive packets from the IrDA stack and send them on the USB pipe.
+ * Handle speed change, timeout and lot's of ugliness...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_build_header(self, skb, header)
+ *
+ * Builds USB-IrDA outbound header
+ *
+ * When we send an IrDA frame over an USB pipe, we add to it a 1 byte
+ * header. This function create this header with the proper values.
+ *
+ * Important note : the USB-IrDA spec 1.0 say very clearly in chapter 5.4.2.2
+ * that the setting of the link speed and xbof number in this outbound header
+ * should be applied *AFTER* the frame has been sent.
+ * Unfortunately, some devices are not compliant with that... It seems that
+ * reading the spec is far too difficult...
+ * Jean II
+ */
+static void irda_usb_build_header(struct irda_usb_cb *self,
+ __u8 *header,
+ int force)
+{
+ /* Set the negotiated link speed */
+ if (self->new_speed != -1) {
+ /* Hum... Ugly hack :-(
+ * Some device are not compliant with the spec and change
+ * parameters *before* sending the frame. - Jean II
+ */
+ if ((self->capability & IUC_SPEED_BUG) &&
+ (!force) && (self->speed != -1)) {
+ /* No speed and xbofs change here
+ * (we'll do it later in the write callback) */
+ IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+ *header = 0;
+ return;
+ }
+
+ IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+ self->speed = self->new_speed;
+ /* We will do ` self->new_speed = -1; ' in the completion
+ * handler just in case the current URB fail - Jean II */
+
+ switch (self->speed) {
+ case 2400:
+ *header = SPEED_2400;
+ break;
+ default:
+ case 9600:
+ *header = SPEED_9600;
+ break;
+ case 19200:
+ *header = SPEED_19200;
+ break;
+ case 38400:
+ *header = SPEED_38400;
+ break;
+ case 57600:
+ *header = SPEED_57600;
+ break;
+ case 115200:
+ *header = SPEED_115200;
+ break;
+ case 576000:
+ *header = SPEED_576000;
+ break;
+ case 1152000:
+ *header = SPEED_1152000;
+ break;
+ case 4000000:
+ *header = SPEED_4000000;
+ self->new_xbofs = 0;
+ break;
+ }
+ } else
+ /* No change */
+ *header = 0;
+
+ /* Set the negotiated additional XBOFS */
+ if (self->new_xbofs != -1) {
+ IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+ self->xbofs = self->new_xbofs;
+ /* We will do ` self->new_xbofs = -1; ' in the completion
+ * handler just in case the current URB fail - Jean II */
+
+ switch (self->xbofs) {
+ case 48:
+ *header |= 0x10;
+ break;
+ case 28:
+ case 24: /* USB spec 1.0 says 24 */
+ *header |= 0x20;
+ break;
+ default:
+ case 12:
+ *header |= 0x30;
+ break;
+ case 5: /* Bug in IrLAP spec? (should be 6) */
+ case 6:
+ *header |= 0x40;
+ break;
+ case 3:
+ *header |= 0x50;
+ break;
+ case 2:
+ *header |= 0x60;
+ break;
+ case 1:
+ *header |= 0x70;
+ break;
+ case 0:
+ *header |= 0x80;
+ break;
+ }
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send a command to change the speed of the dongle
+ * Need to be called with spinlock on.
+ */
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
+{
+ __u8 *frame;
+ struct urb *urb;
+ int ret;
+
+ IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+ self->new_speed, self->new_xbofs);
+
+ /* Grab the speed URB */
+ urb = self->speed_urb;
+ if (urb->status != 0) {
+ IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ return;
+ }
+
+ /* Allocate the fake frame */
+ frame = self->speed_buff;
+
+ /* Set the new speed and xbofs in this fake frame */
+ irda_usb_build_header(self, frame, 1);
+
+ /* Submit the 0 length IrDA frame to trigger new speed settings */
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ frame, IRDA_USB_SPEED_MTU,
+ speed_bulk_callback, self);
+ urb->transfer_buffer_length = USB_IRDA_HEADER;
+ urb->transfer_flags = URB_ASYNC_UNLINK;
+
+ /* Irq disabled -> GFP_ATOMIC */
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
+ IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Speed URB callback
+ * Now, we can only get called for the speed URB.
+ */
+static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct irda_usb_cb *self = urb->context;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* We should always have a context */
+ IRDA_ASSERT(self != NULL, return;);
+ /* We should always be called for the speed URB */
+ IRDA_ASSERT(urb == self->speed_urb, return;);
+
+ /* Check for timeout and other USB nasties */
+ if (urb->status != 0) {
+ /* I get a lot of -ECONNABORTED = -103 here - Jean II */
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+
+ /* Don't do anything here, that might confuse the USB layer.
+ * Instead, we will wait for irda_usb_net_timeout(), the
+ * network layer watchdog, to fix the situation.
+ * Jean II */
+ /* A reset of the dongle might be welcomed here - Jean II */
+ return;
+ }
+
+ /* urb is now available */
+ //urb->status = 0; -> tested above
+
+ /* New speed and xbof is now commited in hardware */
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+
+ /* Allow the stack to send more packets */
+ netif_wake_queue(self->netdev);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send an IrDA frame to the USB dongle (for transmission)
+ */
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct irda_usb_cb *self = netdev->priv;
+ struct urb *urb = self->tx_urb;
+ unsigned long flags;
+ s32 speed;
+ s16 xbofs;
+ int res, mtt;
+ int err = 1; /* Failed */
+
+ IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+
+ netif_stop_queue(netdev);
+
+ /* Protect us from USB callbacks, net watchdog and else. */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if the device is still there.
+ * We need to check self->present under the spinlock because
+ * of irda_usb_disconnect() is synchronous - Jean II */
+ if (!self->present) {
+ IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+ goto drop;
+ }
+
+ /* Check if we need to change the number of xbofs */
+ xbofs = irda_get_next_xbofs(skb);
+ if ((xbofs != self->xbofs) && (xbofs != -1)) {
+ self->new_xbofs = xbofs;
+ }
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->speed) && (speed != -1)) {
+ /* Set the desired speed */
+ self->new_speed = speed;
+
+ /* Check for empty frame */
+ if (!skb->len) {
+ /* IrLAP send us an empty frame to make us change the
+ * speed. Changing speed with the USB adapter is in
+ * fact sending an empty frame to the adapter, so we
+ * could just let the present function do its job.
+ * However, we would wait for min turn time,
+ * do an extra memcpy and increment packet counters...
+ * Jean II */
+ irda_usb_change_speed_xbofs(self);
+ netdev->trans_start = jiffies;
+ /* Will netif_wake_queue() in callback */
+ err = 0; /* No error */
+ goto drop;
+ }
+ }
+
+ if (urb->status != 0) {
+ IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ goto drop;
+ }
+
+ /* Make sure there is room for IrDA-USB header. The actual
+ * allocation will be done lower in skb_push().
+ * Also, we don't use directly skb_cow(), because it require
+ * headroom >= 16, which force unnecessary copies - Jean II */
+ if (skb_headroom(skb) < USB_IRDA_HEADER) {
+ IRDA_DEBUG(0, "%s(), Insuficient skb headroom.\n", __FUNCTION__);
+ if (skb_cow(skb, USB_IRDA_HEADER)) {
+ IRDA_WARNING("%s(), failed skb_cow() !!!\n", __FUNCTION__);
+ goto drop;
+ }
+ }
+
+ /* Change setting for next frame */
+ irda_usb_build_header(self, skb_push(skb, USB_IRDA_HEADER), 0);
+
+ /* FIXME: Make macro out of this one */
+ ((struct irda_skb_cb *)skb->cb)->context = self;
+
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ skb->data, IRDA_SKB_MAX_MTU,
+ write_bulk_callback, skb);
+ urb->transfer_buffer_length = skb->len;
+ /* Note : unlink *must* be Asynchronous because of the code in
+ * irda_usb_net_timeout() -> call in irq - Jean II */
+ urb->transfer_flags = URB_ASYNC_UNLINK;
+ /* This flag (URB_ZERO_PACKET) indicates that what we send is not
+ * a continuous stream of data but separate packets.
+ * In this case, the USB layer will insert an empty USB frame (TD)
+ * after each of our packets that is exact multiple of the frame size.
+ * This is how the dongle will detect the end of packet - Jean II */
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ /* Generate min turn time. FIXME: can we do better than this? */
+ /* Trying to a turnaround time at this level is trying to measure
+ * processor clock cycle with a wrist-watch, approximate at best...
+ *
+ * What we know is the last time we received a frame over USB.
+ * Due to latency over USB that depend on the USB load, we don't
+ * know when this frame was received over IrDA (a few ms before ?)
+ * Then, same story for our outgoing frame...
+ *
+ * In theory, the USB dongle is supposed to handle the turnaround
+ * by itself (spec 1.0, chater 4, page 6). Who knows ??? That's
+ * why this code is enabled only for dongles that doesn't meet
+ * the spec.
+ * Jean II */
+ if (self->capability & IUC_NO_TURN) {
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ int diff;
+ do_gettimeofday(&self->now);
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+#ifdef IU_USB_MIN_RTT
+ /* Factor in USB delays -> Get rid of udelay() that
+ * would be lost in the noise - Jean II */
+ diff += IU_USB_MIN_RTT;
+#endif /* IU_USB_MIN_RTT */
+ /* If the usec counter did wraparound, the diff will
+ * go negative (tv_usec is a long), so we need to
+ * correct it by one second. Jean II */
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff) {
+ mtt -= diff;
+ if (mtt > 1000)
+ mdelay(mtt/1000);
+ else
+ udelay(mtt);
+ }
+ }
+ }
+
+ /* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
+ if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
+ IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+ self->stats.tx_errors++;
+ /* Let USB recover : We will catch that in the watchdog */
+ /*netif_start_queue(netdev);*/
+ } else {
+ /* Increment packet stats */
+ self->stats.tx_packets++;
+ self->stats.tx_bytes += skb->len;
+
+ netdev->trans_start = jiffies;
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return 0;
+
+drop:
+ /* Drop silently the skb and exit */
+ dev_kfree_skb(skb);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return err; /* Usually 1 */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Note : this function will be called only for tx_urb...
+ */
+static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ unsigned long flags;
+ struct sk_buff *skb = urb->context;
+ struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* We should always have a context */
+ IRDA_ASSERT(self != NULL, return;);
+ /* We should always be called for the speed URB */
+ IRDA_ASSERT(urb == self->tx_urb, return;);
+
+ /* Free up the skb */
+ dev_kfree_skb_any(skb);
+ urb->context = NULL;
+
+ /* Check for timeout and other USB nasties */
+ if (urb->status != 0) {
+ /* I get a lot of -ECONNABORTED = -103 here - Jean II */
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+
+ /* Don't do anything here, that might confuse the USB layer,
+ * and we could go in recursion and blow the kernel stack...
+ * Instead, we will wait for irda_usb_net_timeout(), the
+ * network layer watchdog, to fix the situation.
+ * Jean II */
+ /* A reset of the dongle might be welcomed here - Jean II */
+ return;
+ }
+
+ /* urb is now available */
+ //urb->status = 0; -> tested above
+
+ /* Make sure we read self->present properly */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* If the network is closed, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return;
+ }
+
+ /* If changes to speed or xbofs is pending... */
+ if ((self->new_speed != -1) || (self->new_xbofs != -1)) {
+ if ((self->new_speed != self->speed) ||
+ (self->new_xbofs != self->xbofs)) {
+ /* We haven't changed speed yet (because of
+ * IUC_SPEED_BUG), so do it now - Jean II */
+ IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+ irda_usb_change_speed_xbofs(self);
+ } else {
+ /* New speed and xbof is now commited in hardware */
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+ /* Done, waiting for next packet */
+ netif_wake_queue(self->netdev);
+ }
+ } else {
+ /* Otherwise, allow the stack to send more packets */
+ netif_wake_queue(self->netdev);
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Watchdog timer from the network layer.
+ * After a predetermined timeout, if we don't give confirmation that
+ * the packet has been sent (i.e. no call to netif_wake_queue()),
+ * the network layer will call this function.
+ * Note that URB that we submit have also a timeout. When the URB timeout
+ * expire, the normal URB callback is called (write_bulk_callback()).
+ */
+static void irda_usb_net_timeout(struct net_device *netdev)
+{
+ unsigned long flags;
+ struct irda_usb_cb *self = netdev->priv;
+ struct urb *urb;
+ int done = 0; /* If we have made any progress */
+
+ IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* Protect us from USB callbacks, net Tx and else. */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* self->present *MUST* be read under spinlock */
+ if (!self->present) {
+ IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return;
+ }
+
+ /* Check speed URB */
+ urb = self->speed_urb;
+ if (urb->status != 0) {
+ IRDA_DEBUG(0, "%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+
+ switch (urb->status) {
+ case -EINPROGRESS:
+ usb_unlink_urb(urb);
+ /* Note : above will *NOT* call netif_wake_queue()
+ * in completion handler, we will come back here.
+ * Jean II */
+ done = 1;
+ break;
+ case -ECONNABORTED: /* -103 */
+ case -ECONNRESET: /* -104 */
+ case -ETIMEDOUT: /* -110 */
+ case -ENOENT: /* -2 (urb unlinked by us) */
+ default: /* ??? - Play safe */
+ urb->status = 0;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ }
+ }
+
+ /* Check Tx URB */
+ urb = self->tx_urb;
+ if (urb->status != 0) {
+ struct sk_buff *skb = urb->context;
+
+ IRDA_DEBUG(0, "%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+
+ /* Increase error count */
+ self->stats.tx_errors++;
+
+#ifdef IU_BUG_KICK_TIMEOUT
+ /* Can't be a bad idea to reset the speed ;-) - Jean II */
+ if(self->new_speed == -1)
+ self->new_speed = self->speed;
+ if(self->new_xbofs == -1)
+ self->new_xbofs = self->xbofs;
+ irda_usb_change_speed_xbofs(self);
+#endif /* IU_BUG_KICK_TIMEOUT */
+
+ switch (urb->status) {
+ case -EINPROGRESS:
+ usb_unlink_urb(urb);
+ /* Note : above will *NOT* call netif_wake_queue()
+ * in completion handler, because urb->status will
+ * be -ENOENT. We will fix that at the next watchdog,
+ * leaving more time to USB to recover...
+ * Also, we are in interrupt, so we need to have
+ * URB_ASYNC_UNLINK to work properly...
+ * Jean II */
+ done = 1;
+ break;
+ case -ECONNABORTED: /* -103 */
+ case -ECONNRESET: /* -104 */
+ case -ETIMEDOUT: /* -110 */
+ case -ENOENT: /* -2 (urb unlinked by us) */
+ default: /* ??? - Play safe */
+ if(skb != NULL) {
+ dev_kfree_skb_any(skb);
+ urb->context = NULL;
+ }
+ urb->status = 0;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Maybe we need a reset */
+ /* Note : Some drivers seem to use a usb_set_interface() when they
+ * need to reset the hardware. Hum...
+ */
+
+ /* if(done == 0) */
+}
+
+/************************* RECEIVE ROUTINES *************************/
+/*
+ * Receive packets from the USB layer stack and pass them to the IrDA stack.
+ * Try to work around USB failures...
+ */
+
+/*
+ * Note :
+ * Some of you may have noticed that most dongle have an interrupt in pipe
+ * that we don't use. Here is the little secret...
+ * When we hang a Rx URB on the bulk in pipe, it generates some USB traffic
+ * in every USB frame. This is unnecessary overhead.
+ * The interrupt in pipe will generate an event every time a packet is
+ * received. Reading an interrupt pipe adds minimal overhead, but has some
+ * latency (~1ms).
+ * If we are connected (speed != 9600), we want to minimise latency, so
+ * we just always hang the Rx URB and ignore the interrupt.
+ * If we are not connected (speed == 9600), there is usually no Rx traffic,
+ * and we want to minimise the USB overhead. In this case we should wait
+ * on the interrupt pipe and hang the Rx URB only when an interrupt is
+ * received.
+ * Jean II
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Submit a Rx URB to the USB layer to handle reception of a frame
+ * Mostly called by the completion callback of the previous URB.
+ *
+ * Jean II
+ */
+static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struct urb *urb)
+{
+ struct irda_skb_cb *cb;
+ int ret;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* This should never happen */
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(urb != NULL, return;);
+
+ /* Save ourselves in the skb */
+ cb = (struct irda_skb_cb *) skb->cb;
+ cb->context = self;
+
+ /* Reinitialize URB */
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep),
+ skb->data, skb->truesize,
+ irda_usb_receive, skb);
+ /* Note : unlink *must* be synchronous because of the code in
+ * irda_usb_net_close() -> free the skb - Jean II */
+ urb->status = 0;
+
+ /* Can be called from irda_usb_receive (irq handler) -> GFP_ATOMIC */
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, the Rx path will stop... */
+ IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
+ __FUNCTION__, ret);
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_receive(urb)
+ *
+ * Called by the USB subsystem when a frame has been received
+ *
+ */
+static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
+{
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct irda_usb_cb *self;
+ struct irda_skb_cb *cb;
+ struct sk_buff *newskb;
+ struct sk_buff *dataskb;
+ int docopy;
+
+ IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+
+ /* Find ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ IRDA_ASSERT(cb != NULL, return;);
+ self = (struct irda_usb_cb *) cb->context;
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* If the network is closed or the device gone, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+ /* Don't re-submit the URB : will stall the Rx path */
+ return;
+ }
+
+ /* Check the status */
+ if (urb->status != 0) {
+ switch (urb->status) {
+ case -EILSEQ:
+ self->stats.rx_errors++;
+ self->stats.rx_crc_errors++;
+ break;
+ case -ECONNRESET: /* -104 */
+ IRDA_DEBUG(0, "%s(), Connection Reset (-104), transfer_flags 0x%04X \n", __FUNCTION__, urb->transfer_flags);
+ /* uhci_cleanup_unlink() is going to kill the Rx
+ * URB just after we return. No problem, at this
+ * point the URB will be idle ;-) - Jean II */
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), RX status %d,transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+ break;
+ }
+ goto done;
+ }
+
+ /* Check for empty frames */
+ if (urb->actual_length <= USB_IRDA_HEADER) {
+ IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+ goto done;
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ do_gettimeofday(&self->stamp);
+
+ /* Check if we need to copy the data to a new skb or not.
+ * For most frames, we use ZeroCopy and pass the already
+ * allocated skb up the stack.
+ * If the frame is small, it is more efficient to copy it
+ * to save memory (copy will be fast anyway - that's
+ * called Rx-copy-break). Jean II */
+ docopy = (urb->actual_length < IRDA_RX_COPY_THRESHOLD);
+
+ /* Allocate a new skb */
+ newskb = dev_alloc_skb(docopy ? urb->actual_length : IRDA_SKB_MAX_MTU);
+ if (!newskb) {
+ self->stats.rx_dropped++;
+ /* We could deliver the current skb, but this would stall
+ * the Rx path. Better drop the packet... Jean II */
+ goto done;
+ }
+
+ /* Make sure IP header get aligned (IrDA header is 5 bytes) */
+ /* But IrDA-USB header is 1 byte. Jean II */
+ //skb_reserve(newskb, USB_IRDA_HEADER - 1);
+
+ if(docopy) {
+ /* Copy packet, so we can recycle the original */
+ memcpy(newskb->data, skb->data, urb->actual_length);
+ /* Deliver this new skb */
+ dataskb = newskb;
+ /* And hook the old skb to the URB
+ * Note : we don't need to "clean up" the old skb,
+ * as we never touched it. Jean II */
+ } else {
+ /* We are using ZeroCopy. Deliver old skb */
+ dataskb = skb;
+ /* And hook the new skb to the URB */
+ skb = newskb;
+ }
+
+ /* Set proper length on skb & remove USB-IrDA header */
+ skb_put(dataskb, urb->actual_length);
+ skb_pull(dataskb, USB_IRDA_HEADER);
+
+ /* Ask the networking layer to queue the packet for the IrDA stack */
+ dataskb->dev = self->netdev;
+ dataskb->mac.raw = dataskb->data;
+ dataskb->protocol = htons(ETH_P_IRDA);
+ netif_rx(dataskb);
+
+ /* Keep stats up to date */
+ self->stats.rx_bytes += dataskb->len;
+ self->stats.rx_packets++;
+ self->netdev->last_rx = jiffies;
+
+done:
+ /* Note : at this point, the URB we've just received (urb)
+ * is still referenced by the USB layer. For example, if we
+ * have received a -ECONNRESET, uhci_cleanup_unlink() will
+ * continue to process it (in fact, cleaning it up).
+ * If we were to submit this URB, disaster would ensue.
+ * Therefore, we submit our idle URB, and put this URB in our
+ * idle slot....
+ * Jean II */
+ /* Note : with this scheme, we could submit the idle URB before
+ * processing the Rx URB. Another time... Jean II */
+
+ /* Submit the idle URB to replace the URB we've just received */
+ irda_usb_submit(self, skb, self->idle_rx_urb);
+ /* Recycle Rx URB : Now, the idle URB is the present one */
+ urb->context = NULL;
+ self->idle_rx_urb = urb;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Callbak from IrDA layer. IrDA wants to know if we have
+ * started receiving anything.
+ */
+static int irda_usb_is_receiving(struct irda_usb_cb *self)
+{
+ /* Note : because of the way UHCI works, it's almost impossible
+ * to get this info. The Controller DMA directly to memory and
+ * signal only when the whole frame is finished. To know if the
+ * first TD of the URB has been filled or not seems hard work...
+ *
+ * The other solution would be to use the "receiving" command
+ * on the default decriptor with a usb_control_msg(), but that
+ * would add USB traffic and would return result only in the
+ * next USB frame (~1ms).
+ *
+ * I've been told that current dongles send status info on their
+ * interrupt endpoint, and that's what the Windows driver uses
+ * to know this info. Unfortunately, this is not yet in the spec...
+ *
+ * Jean II
+ */
+
+ return 0; /* For now */
+}
+
+/********************** IRDA DEVICE CALLBACKS **********************/
+/*
+ * Main calls from the IrDA/Network subsystem.
+ * Mostly registering a new irda-usb device and removing it....
+ * We only deal with the IrDA side of the business, the USB side will
+ * be dealt with below...
+ */
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ *
+ * Note : don't mess with self->netopen - Jean II
+ */
+static int irda_usb_net_open(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ char hwname[16];
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* Can only open the device if it's there */
+ if(!self->present) {
+ IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* Initialise default speed and xbofs value
+ * (IrLAP will change that soon) */
+ self->speed = -1;
+ self->xbofs = -1;
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+
+ /* To do *before* submitting Rx urbs and starting net Tx queue
+ * Jean II */
+ self->netopen = 1;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ * Note : will send immediately a speed change...
+ */
+ sprintf(hwname, "usb#%d", self->usbdev->devnum);
+ self->irlap = irlap_open(netdev, &self->qos, hwname);
+ IRDA_ASSERT(self->irlap != NULL, return -1;);
+
+ /* Allow IrLAP to send data to us */
+ netif_start_queue(netdev);
+
+ /* We submit all the Rx URB except for one that we keep idle.
+ * Need to be initialised before submitting other USBs, because
+ * in some cases as soon as we submit the URBs the USB layer
+ * will trigger a dummy receive - Jean II */
+ self->idle_rx_urb = self->rx_urb[IU_MAX_ACTIVE_RX_URBS];
+ self->idle_rx_urb->context = NULL;
+
+ /* Now that we can pass data to IrLAP, allow the USB layer
+ * to send us some data... */
+ for (i = 0; i < IU_MAX_ACTIVE_RX_URBS; i++) {
+ struct sk_buff *skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!skb) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, we can't start the Rx path... */
+ IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
+ __FUNCTION__);
+ return -1;
+ }
+ //skb_reserve(newskb, USB_IRDA_HEADER - 1);
+ irda_usb_submit(self, skb, self->rx_urb[i]);
+ }
+
+ /* Ready to play !!! */
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_net_close (self)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int irda_usb_net_close(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* Clear this flag *before* unlinking the urbs and *before*
+ * stopping the network Tx queue - Jean II */
+ self->netopen = 0;
+
+ /* Stop network Tx queue */
+ netif_stop_queue(netdev);
+
+ /* Deallocate all the Rx path buffers (URBs and skb) */
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ struct urb *urb = self->rx_urb[i];
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ /* Cancel the receive command */
+ usb_kill_urb(urb);
+ /* The skb is ours, free it */
+ if(skb) {
+ dev_kfree_skb(skb);
+ urb->context = NULL;
+ }
+ }
+ /* Cancel Tx and speed URB - need to be synchronous to avoid races */
+ self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->tx_urb);
+ self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->speed_urb);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ unsigned long flags;
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct irda_usb_cb *self;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = dev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Protect us from USB callbacks, net watchdog and else. */
+ spin_lock_irqsave(&self->lock, flags);
+ /* Check if the device is still there */
+ if(self->present) {
+ /* Set the desired speed */
+ self->new_speed = irq->ifr_baudrate;
+ irda_usb_change_speed_xbofs(self);
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Check if the IrDA stack is still there */
+ if(self->netopen)
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = irda_usb_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev)
+{
+ struct irda_usb_cb *self = dev->priv;
+ return &self->stats;
+}
+
+/********************* IRDA CONFIG SUBROUTINES *********************/
+/*
+ * Various subroutines dealing with IrDA and network stuff we use to
+ * configure and initialise each irda-usb instance.
+ * These functions are used below in the main calls of the driver...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Set proper values in the IrDA QOS structure
+ */
+static inline void irda_usb_init_qos(struct irda_usb_cb *self)
+{
+ struct irda_class_desc *desc;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ desc = self->irda_desc;
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* See spec section 7.2 for meaning.
+ * Values are little endian (as most USB stuff), the IrDA stack
+ * use it in native order (see parameters.c). - Jean II */
+ self->qos.baud_rate.bits = le16_to_cpu(desc->wBaudRate);
+ self->qos.min_turn_time.bits = desc->bmMinTurnaroundTime;
+ self->qos.additional_bofs.bits = desc->bmAdditionalBOFs;
+ self->qos.window_size.bits = desc->bmWindowSize;
+ self->qos.data_size.bits = desc->bmDataSize;
+
+ IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
+ __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+
+ /* Don't always trust what the dongle tell us */
+ if(self->capability & IUC_SIR_ONLY)
+ self->qos.baud_rate.bits &= 0x00ff;
+ if(self->capability & IUC_SMALL_PKT)
+ self->qos.data_size.bits = 0x07;
+ if(self->capability & IUC_NO_WINDOW)
+ self->qos.window_size.bits = 0x01;
+ if(self->capability & IUC_MAX_WINDOW)
+ self->qos.window_size.bits = 0x7f;
+ if(self->capability & IUC_MAX_XBOFS)
+ self->qos.additional_bofs.bits = 0x01;
+
+#if 1
+ /* Module parameter can override the rx window size */
+ if (qos_mtt_bits)
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+#endif
+ /*
+ * Note : most of those values apply only for the receive path,
+ * the transmit path will be set differently - Jean II
+ */
+ irda_qos_bits_to_value(&self->qos);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Initialise the network side of the irda-usb instance
+ * Called when a new USB instance is registered in irda_usb_probe()
+ */
+static inline int irda_usb_open(struct irda_usb_cb *self)
+{
+ struct net_device *netdev = self->netdev;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ irda_usb_init_qos(self);
+
+ /* Override the network functions we need to use */
+ netdev->hard_start_xmit = irda_usb_hard_xmit;
+ netdev->tx_timeout = irda_usb_net_timeout;
+ netdev->watchdog_timeo = 250*HZ/1000; /* 250 ms > USB timeout */
+ netdev->open = irda_usb_net_open;
+ netdev->stop = irda_usb_net_close;
+ netdev->get_stats = irda_usb_net_get_stats;
+ netdev->do_ioctl = irda_usb_net_ioctl;
+
+ return register_netdev(netdev);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup the network side of the irda-usb instance
+ * Called when a USB instance is removed in irda_usb_disconnect()
+ */
+static inline void irda_usb_close(struct irda_usb_cb *self)
+{
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Remove the speed buffer */
+ if (self->speed_buff != NULL) {
+ kfree(self->speed_buff);
+ self->speed_buff = NULL;
+ }
+}
+
+/********************** USB CONFIG SUBROUTINES **********************/
+/*
+ * Various subroutines dealing with USB stuff we use to configure and
+ * initialise each irda-usb instance.
+ * These functions are used below in the main calls of the driver...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_parse_endpoints(dev, ifnum)
+ *
+ * Parse the various endpoints and find the one we need.
+ *
+ * The endpoint are the pipes used to communicate with the USB device.
+ * The spec defines 2 endpoints of type bulk transfer, one in, and one out.
+ * These are used to pass frames back and forth with the dongle.
+ * Most dongle have also an interrupt endpoint, that will be probably
+ * documented in the next spec...
+ */
+static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_host_endpoint *endpoint, int ennum)
+{
+ int i; /* Endpoint index in table */
+
+ /* Init : no endpoints */
+ self->bulk_in_ep = 0;
+ self->bulk_out_ep = 0;
+ self->bulk_int_ep = 0;
+
+ /* Let's look at all those endpoints */
+ for(i = 0; i < ennum; i++) {
+ /* All those variables will get optimised by the compiler,
+ * so let's aim for clarity... - Jean II */
+ __u8 ep; /* Endpoint address */
+ __u8 dir; /* Endpoint direction */
+ __u8 attr; /* Endpoint attribute */
+ __u16 psize; /* Endpoint max packet size in bytes */
+
+ /* Get endpoint address, direction and attribute */
+ ep = endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ dir = endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ attr = endpoint[i].desc.bmAttributes;
+ psize = le16_to_cpu(endpoint[i].desc.wMaxPacketSize);
+
+ /* Is it a bulk endpoint ??? */
+ if(attr == USB_ENDPOINT_XFER_BULK) {
+ /* We need to find an IN and an OUT */
+ if(dir == USB_DIR_IN) {
+ /* This is our Rx endpoint */
+ self->bulk_in_ep = ep;
+ } else {
+ /* This is our Tx endpoint */
+ self->bulk_out_ep = ep;
+ self->bulk_out_mtu = psize;
+ }
+ } else {
+ if((attr == USB_ENDPOINT_XFER_INT) &&
+ (dir == USB_DIR_IN)) {
+ /* This is our interrupt endpoint */
+ self->bulk_int_ep = ep;
+ } else {
+ IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+ }
+ }
+ }
+
+ IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
+ __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+ /* Should be 8, 16, 32 or 64 bytes */
+ IRDA_ASSERT(self->bulk_out_mtu == 64, ;);
+
+ return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
+}
+
+#ifdef IU_DUMP_CLASS_DESC
+/*------------------------------------------------------------------*/
+/*
+ * Function usb_irda_dump_class_desc(desc)
+ *
+ * Prints out the contents of the IrDA class descriptor
+ *
+ */
+static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc)
+{
+ /* Values are little endian */
+ printk("bLength=%x\n", desc->bLength);
+ printk("bDescriptorType=%x\n", desc->bDescriptorType);
+ printk("bcdSpecRevision=%x\n", le16_to_cpu(desc->bcdSpecRevision));
+ printk("bmDataSize=%x\n", desc->bmDataSize);
+ printk("bmWindowSize=%x\n", desc->bmWindowSize);
+ printk("bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
+ printk("wBaudRate=%x\n", le16_to_cpu(desc->wBaudRate));
+ printk("bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
+ printk("bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
+ printk("bMaxUnicastList=%x\n", desc->bMaxUnicastList);
+}
+#endif /* IU_DUMP_CLASS_DESC */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_find_class_desc(intf)
+ *
+ * Returns instance of IrDA class descriptor, or NULL if not found
+ *
+ * The class descriptor is some extra info that IrDA USB devices will
+ * offer to us, describing their IrDA characteristics. We will use that in
+ * irda_usb_init_qos()
+ */
+static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev (intf);
+ struct irda_class_desc *desc;
+ int ret;
+
+ desc = kmalloc(sizeof (*desc), GFP_KERNEL);
+ if (desc == NULL)
+ return NULL;
+ memset(desc, 0, sizeof(*desc));
+
+ /* USB-IrDA class spec 1.0:
+ * 6.1.3: Standard "Get Descriptor" Device Request is not
+ * appropriate to retrieve class-specific descriptor
+ * 6.2.5: Class Specific "Get Class Descriptor" Interface Request
+ * is mandatory and returns the USB-IrDA class descriptor
+ */
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev,0),
+ IU_REQ_GET_CLASS_DESC,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, intf->altsetting->desc.bInterfaceNumber, desc,
+ sizeof(*desc), 500);
+
+ IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+ if (ret < sizeof(*desc)) {
+ IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
+ (ret<0) ? "failed" : "too short", ret);
+ }
+ else if (desc->bDescriptorType != USB_DT_IRDA) {
+ IRDA_WARNING("usb-irda: bad class_descriptor type\n");
+ }
+ else {
+#ifdef IU_DUMP_CLASS_DESC
+ irda_usb_dump_class_desc(desc);
+#endif /* IU_DUMP_CLASS_DESC */
+
+ return desc;
+ }
+ kfree(desc);
+ return NULL;
+}
+
+/*********************** USB DEVICE CALLBACKS ***********************/
+/*
+ * Main calls from the USB subsystem.
+ * Mostly registering a new irda-usb device and removing it....
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ * The USB layer protect us from reentrancy (via BKL), so we don't need
+ * to spinlock in there... Jean II
+ */
+static int irda_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct net_device *net;
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct irda_usb_cb *self = NULL;
+ struct usb_host_interface *interface;
+ struct irda_class_desc *irda_desc;
+ int ret = -ENOMEM;
+ int i; /* Driver instance index / Rx URB index */
+
+ /* Note : the probe make sure to call us only for devices that
+ * matches the list of dongle (top of the file). So, we
+ * don't need to check if the dongle is really ours.
+ * Jean II */
+
+ IRDA_MESSAGE("IRDA-USB found at address %d, Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ net = alloc_irdadev(sizeof(*self));
+ if (!net)
+ goto err_out;
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(net, &intf->dev);
+ self = net->priv;
+ self->netdev = net;
+ spin_lock_init(&self->lock);
+
+ /* Create all of the needed urbs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->rx_urb[i]) {
+ goto err_out_1;
+ }
+ }
+ self->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->tx_urb) {
+ goto err_out_1;
+ }
+ self->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->speed_urb) {
+ goto err_out_2;
+ }
+
+ /* Is this really necessary? (no, except maybe for broken devices) */
+ if (usb_reset_configuration (dev) < 0) {
+ err("reset_configuration failed");
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Is this really necessary? */
+ /* Note : some driver do hardcode the interface number, some others
+ * specify an alternate, but very few driver do like this.
+ * Jean II */
+ ret = usb_set_interface(dev, intf->altsetting->desc.bInterfaceNumber, 0);
+ IRDA_DEBUG(1, "usb-irda: set interface %d result %d\n", intf->altsetting->desc.bInterfaceNumber, ret);
+ switch (ret) {
+ case 0:
+ break;
+ case -EPIPE: /* -EPIPE = -32 */
+ /* Martin Diehl says if we get a -EPIPE we should
+ * be fine and we don't need to do a usb_clear_halt().
+ * - Jean II */
+ IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Find our endpoints */
+ interface = intf->cur_altsetting;
+ if(!irda_usb_parse_endpoints(self, interface->endpoint,
+ interface->desc.bNumEndpoints)) {
+ IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Find IrDA class descriptor */
+ irda_desc = irda_usb_find_class_desc(intf);
+ ret = -ENODEV;
+ if (irda_desc == NULL)
+ goto err_out_3;
+
+ self->irda_desc = irda_desc;
+ self->present = 1;
+ self->netopen = 0;
+ self->capability = id->driver_info;
+ self->usbdev = dev;
+ self->usbintf = intf;
+
+ /* Allocate the buffer for speed changes */
+ /* Don't change this buffer size and allocation without doing
+ * some heavy and complete testing. Don't ask why :-(
+ * Jean II */
+ self->speed_buff = (char *) kmalloc(IRDA_USB_SPEED_MTU, GFP_KERNEL);
+ if (self->speed_buff == NULL)
+ goto err_out_3;
+
+ memset(self->speed_buff, 0, IRDA_USB_SPEED_MTU);
+
+ ret = irda_usb_open(self);
+ if (ret)
+ goto err_out_4;
+
+ IRDA_MESSAGE("IrDA: Registered device %s\n", net->name);
+ usb_set_intfdata(intf, self);
+ return 0;
+
+err_out_4:
+ kfree(self->speed_buff);
+err_out_3:
+ /* Free all urbs that we may have created */
+ usb_free_urb(self->speed_urb);
+err_out_2:
+ usb_free_urb(self->tx_urb);
+err_out_1:
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ if (self->rx_urb[i])
+ usb_free_urb(self->rx_urb[i]);
+ }
+ free_netdev(net);
+err_out:
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * The current irda-usb device is removed, the USB layer tell us
+ * to shut it down...
+ * One of the constraints is that when we exit this function,
+ * we cannot use the usb_device no more. Gone. Destroyed. kfree().
+ * Most other subsystem allow you to destroy the instance at a time
+ * when it's convenient to you, to postpone it to a later date, but
+ * not the USB subsystem.
+ * So, we must make bloody sure that everything gets deactivated.
+ * Jean II
+ */
+static void irda_usb_disconnect(struct usb_interface *intf)
+{
+ unsigned long flags;
+ struct irda_usb_cb *self = usb_get_intfdata(intf);
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ usb_set_intfdata(intf, NULL);
+ if (!self)
+ return;
+
+ /* Make sure that the Tx path is not executing. - Jean II */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Oups ! We are not there any more.
+ * This will stop/desactivate the Tx path. - Jean II */
+ self->present = 0;
+
+ /* We need to have irq enabled to unlink the URBs. That's OK,
+ * at this point the Tx path is gone - Jean II */
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Hum... Check if networking is still active (avoid races) */
+ if((self->netopen) || (self->irlap)) {
+ /* Accept no more transmissions */
+ /*netif_device_detach(self->netdev);*/
+ netif_stop_queue(self->netdev);
+ /* Stop all the receive URBs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ usb_kill_urb(self->rx_urb[i]);
+ /* Cancel Tx and speed URB.
+ * Toggle flags to make sure it's synchronous. */
+ self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->tx_urb);
+ self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->speed_urb);
+ }
+
+ /* Cleanup the device stuff */
+ irda_usb_close(self);
+ /* No longer attached to USB bus */
+ self->usbdev = NULL;
+ self->usbintf = NULL;
+
+ /* Clean up our urbs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ usb_free_urb(self->rx_urb[i]);
+ /* Clean up Tx and speed URB */
+ usb_free_urb(self->tx_urb);
+ usb_free_urb(self->speed_urb);
+
+ /* Free self and network device */
+ free_netdev(self->netdev);
+ IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .owner = THIS_MODULE,
+ .name = "irda-usb",
+ .probe = irda_usb_probe,
+ .disconnect = irda_usb_disconnect,
+ .id_table = dongles,
+};
+
+/************************* MODULE CALLBACKS *************************/
+/*
+ * Deal with module insertion/removal
+ * Mostly tell USB about our existence
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Module insertion
+ */
+static int __init usb_irda_init(void)
+{
+ int ret;
+
+ ret = usb_register(&irda_driver);
+ if (ret < 0)
+ return ret;
+
+ IRDA_MESSAGE("USB IrDA support registered\n");
+ return 0;
+}
+module_init(usb_irda_init);
+
+/*------------------------------------------------------------------*/
+/*
+ * Module removal
+ */
+static void __exit usb_irda_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(usb_irda_cleanup);
+
+/*------------------------------------------------------------------*/
+/*
+ * Module parameters
+ */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+MODULE_AUTHOR("Roman Weissgaerber <weissg@vienna.at>, Dag Brattli <dag@brattli.net> and Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/irda-usb.h b/drivers/net/irda/irda-usb.h
new file mode 100644
index 000000000000..bd8f66542322
--- /dev/null
+++ b/drivers/net/irda/irda-usb.h
@@ -0,0 +1,163 @@
+/*****************************************************************************
+ *
+ * Filename: irda-usb.h
+ * Version: 0.9b
+ * Description: IrDA-USB Driver
+ * Status: Experimental
+ * Author: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (C) 2001, Roman Weissgaerber <weissg@vienna.at>
+ * Copyright (C) 2000, Dag Brattli <dag@brattli.net>
+ * Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/time.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h> /* struct irlap_cb */
+
+#define RX_COPY_THRESHOLD 200
+#define IRDA_USB_MAX_MTU 2051
+#define IRDA_USB_SPEED_MTU 64 /* Weird, but work like this */
+
+/* Maximum number of active URB on the Rx path
+ * This is the amount of buffers the we keep between the USB harware and the
+ * IrDA stack.
+ *
+ * Note : the network layer does also queue the packets between us and the
+ * IrDA stack, and is actually pretty fast and efficient in doing that.
+ * Therefore, we don't need to have a large number of URBs, and we can
+ * perfectly live happy with only one. We certainly don't need to keep the
+ * full IrTTP window around here...
+ * I repeat for those who have trouble to understand : 1 URB is plenty
+ * good enough to handle back-to-back (brickwalled) frames. I tried it,
+ * it works (it's the hardware that has trouble doing it).
+ *
+ * Having 2 URBs would allow the USB stack to process one URB while we take
+ * care of the other and then swap the URBs...
+ * On the other hand, increasing the number of URB will have penalities
+ * in term of latency and will interact with the link management in IrLAP...
+ * Jean II */
+#define IU_MAX_ACTIVE_RX_URBS 1 /* Don't touch !!! */
+
+/* When a Rx URB is passed back to us, we can't reuse it immediately,
+ * because it may still be referenced by the USB layer. Therefore we
+ * need to keep one extra URB in the Rx path.
+ * Jean II */
+#define IU_MAX_RX_URBS (IU_MAX_ACTIVE_RX_URBS + 1)
+
+/* Various ugly stuff to try to workaround generic problems */
+/* Send speed command in case of timeout, just for trying to get things sane */
+#define IU_BUG_KICK_TIMEOUT
+/* Show the USB class descriptor */
+#undef IU_DUMP_CLASS_DESC
+/* Assume a minimum round trip latency for USB transfer (in us)...
+ * USB transfer are done in the next USB slot if there is no traffic
+ * (1/19 msec) and is done at 12 Mb/s :
+ * Waiting for slot + tx = (53us + 16us) * 2 = 137us minimum.
+ * Rx notification will only be done at the end of the USB frame period :
+ * OHCI : frame period = 1ms
+ * UHCI : frame period = 1ms, but notification can take 2 or 3 ms :-(
+ * EHCI : frame period = 125us */
+#define IU_USB_MIN_RTT 500 /* This should be safe in most cases */
+
+/* Inbound header */
+#define MEDIA_BUSY 0x80
+
+#define SPEED_2400 0x01
+#define SPEED_9600 0x02
+#define SPEED_19200 0x03
+#define SPEED_38400 0x04
+#define SPEED_57600 0x05
+#define SPEED_115200 0x06
+#define SPEED_576000 0x07
+#define SPEED_1152000 0x08
+#define SPEED_4000000 0x09
+
+/* Basic capabilities */
+#define IUC_DEFAULT 0x00 /* Basic device compliant with 1.0 spec */
+/* Main bugs */
+#define IUC_SPEED_BUG 0x01 /* Device doesn't set speed after the frame */
+#define IUC_NO_WINDOW 0x02 /* Device doesn't behave with big Rx window */
+#define IUC_NO_TURN 0x04 /* Device doesn't do turnaround by itself */
+/* Not currently used */
+#define IUC_SIR_ONLY 0x08 /* Device doesn't behave at FIR speeds */
+#define IUC_SMALL_PKT 0x10 /* Device doesn't behave with big Rx packets */
+#define IUC_MAX_WINDOW 0x20 /* Device underestimate the Rx window */
+#define IUC_MAX_XBOFS 0x40 /* Device need more xbofs than advertised */
+
+/* USB class definitions */
+#define USB_IRDA_HEADER 0x01
+#define USB_CLASS_IRDA 0x02 /* USB_CLASS_APP_SPEC subclass */
+#define USB_DT_IRDA 0x21
+
+struct irda_class_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u16 bcdSpecRevision;
+ __u8 bmDataSize;
+ __u8 bmWindowSize;
+ __u8 bmMinTurnaroundTime;
+ __u16 wBaudRate;
+ __u8 bmAdditionalBOFs;
+ __u8 bIrdaRateSniff;
+ __u8 bMaxUnicastList;
+} __attribute__ ((packed));
+
+/* class specific interface request to get the IrDA-USB class descriptor
+ * (6.2.5, USB-IrDA class spec 1.0) */
+
+#define IU_REQ_GET_CLASS_DESC 0x06
+
+struct irda_usb_cb {
+ struct irda_class_desc *irda_desc;
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct usb_interface *usbintf; /* init: probe_irda */
+ int netopen; /* Device is active for network */
+ int present; /* Device is present on the bus */
+ __u32 capability; /* Capability of the hardware */
+ __u8 bulk_in_ep; /* Rx Endpoint assignments */
+ __u8 bulk_out_ep; /* Tx Endpoint assignments */
+ __u16 bulk_out_mtu; /* Max Tx packet size in bytes */
+ __u8 bulk_int_ep; /* Interrupt Endpoint assignments */
+
+ wait_queue_head_t wait_q; /* for timeouts */
+
+ struct urb *rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
+ struct urb *idle_rx_urb; /* Pointer to idle URB in Rx path */
+ struct urb *tx_urb; /* URB used to send data frames */
+ struct urb *speed_urb; /* URB used to send speed commands */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdev. */
+ struct net_device_stats stats;
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos;
+ hashbin_t *tx_list; /* Queued transmit skb's */
+ char *speed_buff; /* Buffer for speed changes */
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u16 xbofs; /* Current xbofs setting */
+ __s16 new_xbofs; /* xbofs we need to set */
+ __u32 speed; /* Current speed */
+ __s32 new_speed; /* speed we need to set */
+};
+
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
new file mode 100644
index 000000000000..5971315f3fa0
--- /dev/null
+++ b/drivers/net/irda/irport.c
@@ -0,0 +1,1146 @@
+/*********************************************************************
+ *
+ * Filename: irport.c
+ * Version: 1.0
+ * Description: Half duplex serial port SIR driver for IrDA.
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 3 13:49:59 1997
+ * Modified at: Fri Jan 28 20:22:38 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: serial.c by Linus Torvalds
+ *
+ * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This driver is ment to be a small half duplex serial driver to be
+ * used for IR-chipsets that has a UART (16550) compatibility mode.
+ * Eventually it will replace irtty, because of irtty has some
+ * problems that is hard to get around when we don't have control
+ * over the serial driver. This driver may also be used by FIR
+ * drivers to handle SIR mode for them.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/serial_reg.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/rtnetlink.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include "irport.h"
+
+#define IO_EXTENT 8
+
+/*
+ * Currently you'll need to set these values using insmod like this:
+ * insmod irport io=0x3e8 irq=11
+ */
+static unsigned int io[] = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0 };
+
+static unsigned int qos_mtt_bits = 0x03;
+
+static struct irport_cb *dev_self[] = { NULL, NULL, NULL, NULL};
+static char *driver_name = "irport";
+
+static inline void irport_write_wakeup(struct irport_cb *self);
+static inline int irport_write(int iobase, int fifo_size, __u8 *buf, int len);
+static inline void irport_receive(struct irport_cb *self);
+
+static int irport_net_ioctl(struct net_device *dev, struct ifreq *rq,
+ int cmd);
+static inline int irport_is_receiving(struct irport_cb *self);
+static int irport_set_dtr_rts(struct net_device *dev, int dtr, int rts);
+static int irport_raw_write(struct net_device *dev, __u8 *buf, int len);
+static struct net_device_stats *irport_net_get_stats(struct net_device *dev);
+static int irport_change_speed_complete(struct irda_task *task);
+static void irport_timeout(struct net_device *dev);
+
+static irqreturn_t irport_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static void irport_change_speed(void *priv, __u32 speed);
+static int irport_net_open(struct net_device *dev);
+static int irport_net_close(struct net_device *dev);
+
+static struct irport_cb *
+irport_open(int i, unsigned int iobase, unsigned int irq)
+{
+ struct net_device *dev;
+ struct irport_cb *self;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ /* Lock the port that we need */
+ if (!request_region(iobase, IO_EXTENT, driver_name)) {
+ IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__, iobase);
+ goto err_out1;
+ }
+
+ /*
+ * Allocate new instance of the driver
+ */
+ dev = alloc_irdadev(sizeof(struct irport_cb));
+ if (!dev) {
+ IRDA_ERROR("%s(), can't allocate memory for "
+ "irda device!\n", __FUNCTION__);
+ goto err_out2;
+ }
+
+ self = dev->priv;
+ spin_lock_init(&self->lock);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->priv = self;
+ self->index = i;
+
+ /* Initialize IO */
+ self->io.sir_base = iobase;
+ self->io.sir_ext = IO_EXTENT;
+ self->io.irq = irq;
+ self->io.fifo_size = 16; /* 16550A and compatible */
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200;
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Bootstrap ZeroCopy Rx */
+ self->rx_buff.truesize = IRDA_SKB_MAX_MTU;
+ self->rx_buff.skb = __dev_alloc_skb(self->rx_buff.truesize,
+ GFP_KERNEL);
+ if (self->rx_buff.skb == NULL) {
+ IRDA_ERROR("%s(), can't allocate memory for "
+ "receive buffer!\n", __FUNCTION__);
+ goto err_out3;
+ }
+ skb_reserve(self->rx_buff.skb, 1);
+ self->rx_buff.head = self->rx_buff.skb->data;
+ /* No need to memset the buffer, unless you are really pedantic */
+
+ /* Finish setup the Rx buffer descriptor */
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Specify how much memory we want */
+ self->tx_buff.truesize = 4000;
+
+ /* Allocate memory if needed */
+ if (self->tx_buff.truesize > 0) {
+ self->tx_buff.head = (__u8 *) kmalloc(self->tx_buff.truesize,
+ GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ IRDA_ERROR("%s(), can't allocate memory for "
+ "transmit buffer!\n", __FUNCTION__);
+ goto err_out4;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+ }
+ self->tx_buff.data = self->tx_buff.head;
+
+ self->netdev = dev;
+ /* Keep track of module usage */
+ SET_MODULE_OWNER(dev);
+
+ /* May be overridden by piggyback drivers */
+ self->interrupt = irport_interrupt;
+ self->change_speed = irport_change_speed;
+
+ /* Override the network functions we need to use */
+ dev->hard_start_xmit = irport_hard_xmit;
+ dev->tx_timeout = irport_timeout;
+ dev->watchdog_timeo = HZ; /* Allow time enough for speed change */
+ dev->open = irport_net_open;
+ dev->stop = irport_net_close;
+ dev->get_stats = irport_net_get_stats;
+ dev->do_ioctl = irport_net_ioctl;
+
+ /* Make ifconfig display some details */
+ dev->base_addr = iobase;
+ dev->irq = irq;
+
+ if (register_netdev(dev)) {
+ IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+ goto err_out5;
+ }
+ IRDA_MESSAGE("IrDA: Registered device %s (irport io=0x%X irq=%d)\n",
+ dev->name, iobase, irq);
+
+ return self;
+ err_out5:
+ kfree(self->tx_buff.head);
+ err_out4:
+ kfree_skb(self->rx_buff.skb);
+ err_out3:
+ free_netdev(dev);
+ dev_self[i] = NULL;
+ err_out2:
+ release_region(iobase, IO_EXTENT);
+ err_out1:
+ return NULL;
+}
+
+static int irport_close(struct irport_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* We are not using any dongle anymore! */
+ if (self->dongle)
+ irda_device_dongle_cleanup(self->dongle);
+ self->dongle = NULL;
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the IO-port that this driver is using */
+ IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n",
+ __FUNCTION__, self->io.sir_base);
+ release_region(self->io.sir_base, self->io.sir_ext);
+
+ if (self->tx_buff.head)
+ kfree(self->tx_buff.head);
+
+ if (self->rx_buff.skb)
+ kfree_skb(self->rx_buff.skb);
+ self->rx_buff.skb = NULL;
+
+ /* Remove ourselves */
+ dev_self[self->index] = NULL;
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+static void irport_stop(struct irport_cb *self)
+{
+ int iobase;
+
+ iobase = self->io.sir_base;
+
+ /* We can't lock, we may be called from a FIR driver - Jean II */
+
+ /* We are not transmitting any more */
+ self->transmitting = 0;
+
+ /* Reset UART */
+ outb(0, iobase+UART_MCR);
+
+ /* Turn off interrupts */
+ outb(0, iobase+UART_IER);
+}
+
+static void irport_start(struct irport_cb *self)
+{
+ int iobase;
+
+ iobase = self->io.sir_base;
+
+ irport_stop(self);
+
+ /* We can't lock, we may be called from a FIR driver - Jean II */
+
+ /* Initialize UART */
+ outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
+
+ /* Turn on interrups */
+ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
+}
+
+/*
+ * Function irport_probe (void)
+ *
+ * Start IO port
+ *
+ */
+int irport_probe(int iobase)
+{
+ IRDA_DEBUG(4, "%s(), iobase=%#x\n", __FUNCTION__, iobase);
+
+ return 0;
+}
+
+/*
+ * Function irport_get_fcr (speed)
+ *
+ * Compute value of fcr
+ *
+ */
+static inline unsigned int irport_get_fcr(__u32 speed)
+{
+ unsigned int fcr; /* FIFO control reg */
+
+ /* Enable fifos */
+ fcr = UART_FCR_ENABLE_FIFO;
+
+ /*
+ * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
+ * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
+ * about this timeout since it will always be fast enough.
+ */
+ if (speed < 38400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ //fcr |= UART_FCR_TRIGGER_14;
+ fcr |= UART_FCR_TRIGGER_8;
+
+ return(fcr);
+}
+
+/*
+ * Function irport_change_speed (self, speed)
+ *
+ * Set speed of IrDA port to specified baudrate
+ *
+ * This function should be called with irq off and spin-lock.
+ */
+static void irport_change_speed(void *priv, __u32 speed)
+{
+ struct irport_cb *self = (struct irport_cb *) priv;
+ int iobase;
+ unsigned int fcr; /* FIFO control reg */
+ unsigned int lcr; /* Line control reg */
+ int divisor;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(speed != 0, return;);
+
+ IRDA_DEBUG(1, "%s(), Setting speed to: %d - iobase=%#x\n",
+ __FUNCTION__, speed, self->io.sir_base);
+
+ /* We can't lock, we may be called from a FIR driver - Jean II */
+
+ iobase = self->io.sir_base;
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ /* Turn off interrupts */
+ outb(0, iobase+UART_IER);
+
+ divisor = SPEED_MAX/speed;
+
+ /* Get proper fifo configuration */
+ fcr = irport_get_fcr(speed);
+
+ /* IrDA ports use 8N1 */
+ lcr = UART_LCR_WLEN8;
+
+ outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
+ outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
+ outb(divisor >> 8, iobase+UART_DLM);
+ outb(lcr, iobase+UART_LCR); /* Set 8N1 */
+ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
+
+ /* Turn on interrups */
+ /* This will generate a fatal interrupt storm.
+ * People calling us will do that properly - Jean II */
+ //outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
+}
+
+/*
+ * Function __irport_change_speed (instance, state, param)
+ *
+ * State machine for changing speed of the device. We do it this way since
+ * we cannot use schedule_timeout() when we are in interrupt context
+ *
+ */
+int __irport_change_speed(struct irda_task *task)
+{
+ struct irport_cb *self;
+ __u32 speed = (__u32) task->param;
+ unsigned long flags = 0;
+ int wasunlocked = 0;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+ self = (struct irport_cb *) task->instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* Locking notes : this function may be called from irq context with
+ * spinlock, via irport_write_wakeup(), or from non-interrupt without
+ * spinlock (from the task timer). Yuck !
+ * This is ugly, and unsafe is the spinlock is not already aquired.
+ * This will be fixed when irda-task get rewritten.
+ * Jean II */
+ if (!spin_is_locked(&self->lock)) {
+ spin_lock_irqsave(&self->lock, flags);
+ wasunlocked = 1;
+ }
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ case IRDA_TASK_WAIT:
+ /* Are we ready to change speed yet? */
+ if (self->tx_buff.len > 0) {
+ task->state = IRDA_TASK_WAIT;
+
+ /* Try again later */
+ ret = msecs_to_jiffies(20);
+ break;
+ }
+
+ if (self->dongle)
+ irda_task_next_state(task, IRDA_TASK_CHILD_INIT);
+ else
+ irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
+ break;
+ case IRDA_TASK_CHILD_INIT:
+ /* Go to default speed */
+ self->change_speed(self->priv, 9600);
+
+ /* Change speed of dongle */
+ if (irda_task_execute(self->dongle,
+ self->dongle->issue->change_speed,
+ NULL, task, (void *) speed))
+ {
+ /* Dongle need more time to change its speed */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* Give dongle 1 sec to finish */
+ ret = msecs_to_jiffies(1000);
+ } else
+ /* Child finished immediately */
+ irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
+ break;
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), changing speed of dongle timed out!\n", __FUNCTION__);
+ ret = -1;
+ break;
+ case IRDA_TASK_CHILD_DONE:
+ /* Finally we are ready to change the speed */
+ self->change_speed(self->priv, speed);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ ret = -1;
+ break;
+ }
+ /* Put stuff in the state we found them - Jean II */
+ if(wasunlocked) {
+ spin_unlock_irqrestore(&self->lock, flags);
+ }
+
+ return ret;
+}
+
+/*
+ * Function irport_change_speed_complete (task)
+ *
+ * Called when the change speed operation completes
+ *
+ */
+static int irport_change_speed_complete(struct irda_task *task)
+{
+ struct irport_cb *self;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ self = (struct irport_cb *) task->instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+ /* Finished changing speed, so we are not busy any longer */
+ /* Signal network layer so it can try to send the frame */
+
+ netif_wake_queue(self->netdev);
+
+ return 0;
+}
+
+/*
+ * Function irport_timeout (struct net_device *dev)
+ *
+ * The networking layer thinks we timed out.
+ *
+ */
+
+static void irport_timeout(struct net_device *dev)
+{
+ struct irport_cb *self;
+ int iobase;
+ int iir, lsr;
+ unsigned long flags;
+
+ self = (struct irport_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return;);
+ iobase = self->io.sir_base;
+
+ IRDA_WARNING("%s: transmit timed out, jiffies = %ld, trans_start = %ld\n",
+ dev->name, jiffies, dev->trans_start);
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Debug what's happening... */
+
+ /* Get interrupt status */
+ lsr = inb(iobase+UART_LSR);
+ /* Read interrupt register */
+ iir = inb(iobase+UART_IIR);
+ IRDA_DEBUG(0, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ __FUNCTION__, iir, lsr, iobase);
+
+ IRDA_DEBUG(0, "%s(), transmitting=%d, remain=%d, done=%d\n",
+ __FUNCTION__, self->transmitting, self->tx_buff.len,
+ self->tx_buff.data - self->tx_buff.head);
+
+ /* Now, restart the port */
+ irport_start(self);
+ self->change_speed(self->priv, self->io.speed);
+ /* This will re-enable irqs */
+ outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ netif_wake_queue(dev);
+}
+
+/*
+ * Function irport_wait_hw_transmitter_finish ()
+ *
+ * Wait for the real end of HW transmission
+ *
+ * The UART is a strict FIFO, and we get called only when we have finished
+ * pushing data to the FIFO, so the maximum amount of time we must wait
+ * is only for the FIFO to drain out.
+ *
+ * We use a simple calibrated loop. We may need to adjust the loop
+ * delay (udelay) to balance I/O traffic and latency. And we also need to
+ * adjust the maximum timeout.
+ * It would probably be better to wait for the proper interrupt,
+ * but it doesn't seem to be available.
+ *
+ * We can't use jiffies or kernel timers because :
+ * 1) We are called from the interrupt handler, which disable softirqs,
+ * so jiffies won't be increased
+ * 2) Jiffies granularity is usually very coarse (10ms), and we don't
+ * want to wait that long to detect stuck hardware.
+ * Jean II
+ */
+
+static void irport_wait_hw_transmitter_finish(struct irport_cb *self)
+{
+ int iobase;
+ int count = 1000; /* 1 ms */
+
+ iobase = self->io.sir_base;
+
+ /* Calibrated busy loop */
+ while((count-- > 0) && !(inb(iobase+UART_LSR) & UART_LSR_TEMT))
+ udelay(1);
+
+ if(count == 0)
+ IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
+}
+
+/*
+ * Function irport_hard_start_xmit (struct sk_buff *skb, struct net_device *dev)
+ *
+ * Transmits the current frame until FIFO is full, then
+ * waits until the next transmitt interrupt, and continues until the
+ * frame is transmitted.
+ */
+static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct irport_cb *self;
+ unsigned long flags;
+ int iobase;
+ s32 speed;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return 0;);
+
+ self = (struct irport_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.sir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests & speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ /*
+ * We send frames one by one in SIR mode (no
+ * pipelining), so at this point, if we were sending
+ * a previous frame, we just received the interrupt
+ * telling us it is finished (UART_IIR_THRI).
+ * Therefore, waiting for the transmitter to really
+ * finish draining the fifo won't take too long.
+ * And the interrupt handler is not expected to run.
+ * - Jean II */
+ irport_wait_hw_transmitter_finish(self);
+ /* Better go there already locked - Jean II */
+ irda_task_execute(self, __irport_change_speed,
+ irport_change_speed_complete,
+ NULL, (void *) speed);
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Init tx buffer */
+ self->tx_buff.data = self->tx_buff.head;
+
+ /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* We are transmitting */
+ self->transmitting = 1;
+
+ /* Turn on transmit finished interrupt. Will fire immediately! */
+ outb(UART_IER_THRI, iobase+UART_IER);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irport_write (driver)
+ *
+ * Fill Tx FIFO with transmit data
+ *
+ * Called only from irport_write_wakeup()
+ */
+static inline int irport_write(int iobase, int fifo_size, __u8 *buf, int len)
+{
+ int actual = 0;
+
+ /* Fill FIFO with current frame */
+ while ((actual < fifo_size) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual], iobase+UART_TX);
+
+ actual++;
+ }
+
+ return actual;
+}
+
+/*
+ * Function irport_write_wakeup (tty)
+ *
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ *
+ * Called only from irport_interrupt()
+ * Make sure this function is *not* called while we are receiving,
+ * otherwise we will reset fifo and loose data :-(
+ */
+static inline void irport_write_wakeup(struct irport_cb *self)
+{
+ int actual = 0;
+ int iobase;
+ unsigned int fcr;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ iobase = self->io.sir_base;
+
+ /* Finished with frame? */
+ if (self->tx_buff.len > 0) {
+ /* Write data left in transmit buffer */
+ actual = irport_write(iobase, self->io.fifo_size,
+ self->tx_buff.data, self->tx_buff.len);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+ } else {
+ /*
+ * Now serial buffer is almost free & we can start
+ * transmission of another packet. But first we must check
+ * if we need to change the speed of the hardware
+ */
+ if (self->new_speed) {
+ irport_wait_hw_transmitter_finish(self);
+ irda_task_execute(self, __irport_change_speed,
+ irport_change_speed_complete,
+ NULL, (void *) self->new_speed);
+ self->new_speed = 0;
+ } else {
+ /* Tell network layer that we want more frames */
+ netif_wake_queue(self->netdev);
+ }
+ self->stats.tx_packets++;
+
+ /*
+ * Reset Rx FIFO to make sure that all reflected transmit data
+ * is discarded. This is needed for half duplex operation
+ */
+ fcr = irport_get_fcr(self->io.speed);
+ fcr |= UART_FCR_CLEAR_RCVR;
+ outb(fcr, iobase+UART_FCR);
+
+ /* Finished transmitting */
+ self->transmitting = 0;
+
+ /* Turn on receive interrupts */
+ outb(UART_IER_RDI, iobase+UART_IER);
+
+ IRDA_DEBUG(1, "%s() : finished Tx\n", __FUNCTION__);
+ }
+}
+
+/*
+ * Function irport_receive (self)
+ *
+ * Receive one frame from the infrared port
+ *
+ * Called only from irport_interrupt()
+ */
+static inline void irport_receive(struct irport_cb *self)
+{
+ int boguscount = 0;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /*
+ * Receive all characters in Rx FIFO, unwrap and unstuff them.
+ * async_unwrap_char will deliver all found frames
+ */
+ do {
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ inb(iobase+UART_RX));
+
+ /* Make sure we don't stay here too long */
+ if (boguscount++ > 32) {
+ IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
+ break;
+ }
+ } while (inb(iobase+UART_LSR) & UART_LSR_DR);
+}
+
+/*
+ * Function irport_interrupt (irq, dev_id, regs)
+ *
+ * Interrupt handler
+ */
+static irqreturn_t irport_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct irport_cb *self;
+ int boguscount = 0;
+ int iobase;
+ int iir, lsr;
+ int handled = 0;
+
+ if (!dev) {
+ IRDA_WARNING("%s() irq %d for unknown device.\n", __FUNCTION__, irq);
+ return IRQ_NONE;
+ }
+ self = (struct irport_cb *) dev->priv;
+
+ spin_lock(&self->lock);
+
+ iobase = self->io.sir_base;
+
+ /* Cut'n'paste interrupt routine from serial.c
+ * This version try to minimise latency and I/O operations.
+ * Simplified and modified to enforce half duplex operation.
+ * - Jean II */
+
+ /* Check status even is iir reg is cleared, more robust and
+ * eliminate a read on the I/O bus - Jean II */
+ do {
+ /* Get interrupt status ; Clear interrupt */
+ lsr = inb(iobase+UART_LSR);
+
+ /* Are we receiving or transmitting ? */
+ if(!self->transmitting) {
+ /* Received something ? */
+ if (lsr & UART_LSR_DR)
+ irport_receive(self);
+ } else {
+ /* Room in Tx fifo ? */
+ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+ irport_write_wakeup(self);
+ }
+
+ /* A bit hackish, but working as expected... Jean II */
+ if(lsr & (UART_LSR_THRE | UART_LSR_TEMT | UART_LSR_DR))
+ handled = 1;
+
+ /* Make sure we don't stay here to long */
+ if (boguscount++ > 10) {
+ IRDA_WARNING("%s() irq handler looping : lsr=%02x\n",
+ __FUNCTION__, lsr);
+ break;
+ }
+
+ /* Read interrupt register */
+ iir = inb(iobase+UART_IIR);
+
+ /* Enable this debug only when no other options and at low
+ * bit rates, otherwise it may cause Rx overruns (lsr=63).
+ * - Jean II */
+ IRDA_DEBUG(6, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ __FUNCTION__, iir, lsr, iobase);
+
+ /* As long as interrupt pending... */
+ } while ((iir & UART_IIR_NO_INT) == 0);
+
+ spin_unlock(&self->lock);
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * Function irport_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ *
+ */
+static int irport_net_open(struct net_device *dev)
+{
+ struct irport_cb *self;
+ int iobase;
+ char hwname[16];
+ unsigned long flags;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct irport_cb *) dev->priv;
+
+ iobase = self->io.sir_base;
+
+ if (request_irq(self->io.irq, self->interrupt, 0, dev->name,
+ (void *) dev)) {
+ IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
+ __FUNCTION__, self->io.irq);
+ return -EAGAIN;
+ }
+
+ spin_lock_irqsave(&self->lock, flags);
+ /* Init uart */
+ irport_start(self);
+ /* Set 9600 bauds per default, including at the dongle */
+ irda_task_execute(self, __irport_change_speed,
+ irport_change_speed_complete,
+ NULL, (void *) 9600);
+ spin_unlock_irqrestore(&self->lock, flags);
+
+
+ /* Give self a hardware name */
+ sprintf(hwname, "SIR @ 0x%03x", self->io.sir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ /* Ready to play! */
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Function irport_net_close (self)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int irport_net_close(struct net_device *dev)
+{
+ struct irport_cb *self;
+ int iobase;
+ unsigned long flags;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct irport_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.sir_base;
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ spin_lock_irqsave(&self->lock, flags);
+ irport_stop(self);
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ free_irq(self->io.irq, dev);
+
+ return 0;
+}
+
+/*
+ * Function irport_is_receiving (self)
+ *
+ * Returns true is we are currently receiving data
+ *
+ */
+static inline int irport_is_receiving(struct irport_cb *self)
+{
+ return (self->rx_buff.state != OUTSIDE_FRAME);
+}
+
+/*
+ * Function irport_set_dtr_rts (tty, dtr, rts)
+ *
+ * This function can be used by dongles etc. to set or reset the status
+ * of the dtr and rts lines
+ */
+static int irport_set_dtr_rts(struct net_device *dev, int dtr, int rts)
+{
+ struct irport_cb *self = dev->priv;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.sir_base;
+
+ if (dtr)
+ dtr = UART_MCR_DTR;
+ if (rts)
+ rts = UART_MCR_RTS;
+
+ outb(dtr|rts|UART_MCR_OUT2, iobase+UART_MCR);
+
+ return 0;
+}
+
+static int irport_raw_write(struct net_device *dev, __u8 *buf, int len)
+{
+ struct irport_cb *self = (struct irport_cb *) dev->priv;
+ int actual = 0;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.sir_base;
+
+ /* Tx FIFO should be empty! */
+ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
+ IRDA_DEBUG( 0, "%s(), failed, fifo not empty!\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* Fill FIFO with current frame */
+ while (actual < len) {
+ /* Transmit next byte */
+ outb(buf[actual], iobase+UART_TX);
+ actual++;
+ }
+
+ return actual;
+}
+
+/*
+ * Function irport_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int irport_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct irport_cb *self;
+ dongle_t *dongle;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ irda_task_execute(self, __irport_change_speed, NULL,
+ NULL, (void *) irq->ifr_baudrate);
+ break;
+ case SIOCSDONGLE: /* Set dongle */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ /* Locking :
+ * irda_device_dongle_init() can't be locked.
+ * irda_task_execute() doesn't need to be locked.
+ * Jean II
+ */
+
+ /* Initialize dongle */
+ dongle = irda_device_dongle_init(dev, irq->ifr_dongle);
+ if (!dongle)
+ break;
+
+ dongle->set_mode = NULL;
+ dongle->read = NULL;
+ dongle->write = irport_raw_write;
+ dongle->set_dtr_rts = irport_set_dtr_rts;
+
+ /* Now initialize the dongle! */
+ dongle->issue->open(dongle, &self->qos);
+
+ /* Reset dongle */
+ irda_task_execute(dongle, dongle->issue->reset, NULL, NULL,
+ NULL);
+
+ /* Make dongle available to driver only now to avoid
+ * race conditions - Jean II */
+ self->dongle = dongle;
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = irport_is_receiving(self);
+ break;
+ case SIOCSDTRRTS:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ /* No real need to lock... */
+ spin_lock_irqsave(&self->lock, flags);
+ irport_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *irport_net_get_stats(struct net_device *dev)
+{
+ struct irport_cb *self = (struct irport_cb *) dev->priv;
+
+ return &self->stats;
+}
+
+static int __init irport_init(void)
+{
+ int i;
+
+ for (i=0; (io[i] < 2000) && (i < 4); i++) {
+ if (irport_open(i, io[i], irq[i]) != NULL)
+ return 0;
+ }
+ /*
+ * Maybe something failed, but we can still be usable for FIR drivers
+ */
+ return 0;
+}
+
+/*
+ * Function irport_cleanup ()
+ *
+ * Close all configured ports
+ *
+ */
+static void __exit irport_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ irport_close(dev_self[i]);
+ }
+}
+
+MODULE_PARM(io, "1-4i");
+MODULE_PARM_DESC(io, "Base I/O addresses");
+MODULE_PARM(irq, "1-4i");
+MODULE_PARM_DESC(irq, "IRQ lines");
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Half duplex serial driver for IrDA SIR mode");
+MODULE_LICENSE("GPL");
+
+module_init(irport_init);
+module_exit(irport_cleanup);
+
diff --git a/drivers/net/irda/irport.h b/drivers/net/irda/irport.h
new file mode 100644
index 000000000000..fc89c8c3dd7f
--- /dev/null
+++ b/drivers/net/irda/irport.h
@@ -0,0 +1,80 @@
+/*********************************************************************
+ *
+ * Filename: irport.h
+ * Version: 0.1
+ * Description: Serial driver for IrDA
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 3 13:49:59 1997
+ * Modified at: Fri Jan 14 10:21:10 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRPORT_H
+#define IRPORT_H
+
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <net/irda/irda_device.h>
+
+#define SPEED_DEFAULT 9600
+#define SPEED_MAX 115200
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN 0
+#define PORT_8250 1
+#define PORT_16450 2
+#define PORT_16550 3
+#define PORT_16550A 4
+#define PORT_CIRRUS 5
+#define PORT_16650 6
+#define PORT_MAX 6
+
+#define FRAME_MAX_SIZE 2048
+
+struct irport_cb {
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are attached to */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+
+ struct qos_info qos; /* QoS capabilities for this device */
+ dongle_t *dongle; /* Dongle driver */
+
+ __u32 flags; /* Interface flags */
+ __u32 new_speed;
+ int mode;
+ int index; /* Instance index */
+ int transmitting; /* Are we transmitting ? */
+
+ spinlock_t lock; /* For serializing operations */
+
+ /* For piggyback drivers */
+ void *priv;
+ void (*change_speed)(void *priv, __u32 speed);
+ int (*interrupt)(int irq, void *dev_id, struct pt_regs *regs);
+};
+
+#endif /* IRPORT_H */
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
new file mode 100644
index 000000000000..7d23aa375908
--- /dev/null
+++ b/drivers/net/irda/irtty-sir.c
@@ -0,0 +1,642 @@
+/*********************************************************************
+ *
+ * Filename: irtty-sir.c
+ * Version: 2.0
+ * Description: IrDA line discipline implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Dec 9 21:18:38 1997
+ * Modified at: Sun Oct 27 22:13:30 2002
+ * Modified by: Martin Diehl <mad@mdiehl.de>
+ * Sources: slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
+ * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli,
+ * Copyright (c) 2002 Martin Diehl,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "sir-dev.h"
+#include "irtty-sir.h"
+
+static int qos_mtt_bits = 0x03; /* 5 ms or more */
+
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+
+/* ------------------------------------------------------- */
+
+/* device configuration callbacks always invoked with irda-thread context */
+
+/* find out, how many chars we have in buffers below us
+ * this is allowed to lie, i.e. return less chars than we
+ * actually have. The returned value is used to determine
+ * how long the irdathread should wait before doing the
+ * real blocking wait_until_sent()
+ */
+
+static int irtty_chars_in_buffer(struct sir_dev *dev)
+{
+ struct sirtty_cb *priv = dev->priv;
+
+ IRDA_ASSERT(priv != NULL, return -1;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
+
+ return priv->tty->driver->chars_in_buffer(priv->tty);
+}
+
+/* Wait (sleep) until underlaying hardware finished transmission
+ * i.e. hardware buffers are drained
+ * this must block and not return before all characters are really sent
+ *
+ * If the tty sits on top of a 16550A-like uart, there are typically
+ * up to 16 bytes in the fifo - f.e. 9600 bps 8N1 needs 16.7 msec
+ *
+ * With usbserial the uart-fifo is basically replaced by the converter's
+ * outgoing endpoint buffer, which can usually hold 64 bytes (at least).
+ * With pl2303 it appears we are safe with 60msec here.
+ *
+ * I really wish all serial drivers would provide
+ * correct implementation of wait_until_sent()
+ */
+
+#define USBSERIAL_TX_DONE_DELAY 60
+
+static void irtty_wait_until_sent(struct sir_dev *dev)
+{
+ struct sirtty_cb *priv = dev->priv;
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(priv != NULL, return;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;);
+
+ tty = priv->tty;
+ if (tty->driver->wait_until_sent) {
+ lock_kernel();
+ tty->driver->wait_until_sent(tty, msecs_to_jiffies(100));
+ unlock_kernel();
+ }
+ else {
+ msleep(USBSERIAL_TX_DONE_DELAY);
+ }
+}
+
+/*
+ * Function irtty_change_speed (dev, speed)
+ *
+ * Change the speed of the serial port.
+ *
+ * This may sleep in set_termios (usbserial driver f.e.) and must
+ * not be called from interrupt/timer/tasklet therefore.
+ * All such invocations are deferred to kIrDAd now so we can sleep there.
+ */
+
+static int irtty_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ struct sirtty_cb *priv = dev->priv;
+ struct tty_struct *tty;
+ struct termios old_termios;
+ int cflag;
+
+ IRDA_ASSERT(priv != NULL, return -1;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
+
+ tty = priv->tty;
+
+ lock_kernel();
+ old_termios = *(tty->termios);
+ cflag = tty->termios->c_cflag;
+
+ cflag &= ~CBAUD;
+
+ IRDA_DEBUG(2, "%s(), Setting speed to %d\n", __FUNCTION__, speed);
+
+ switch (speed) {
+ case 1200:
+ cflag |= B1200;
+ break;
+ case 2400:
+ cflag |= B2400;
+ break;
+ case 4800:
+ cflag |= B4800;
+ break;
+ case 19200:
+ cflag |= B19200;
+ break;
+ case 38400:
+ cflag |= B38400;
+ break;
+ case 57600:
+ cflag |= B57600;
+ break;
+ case 115200:
+ cflag |= B115200;
+ break;
+ case 9600:
+ default:
+ cflag |= B9600;
+ break;
+ }
+
+ tty->termios->c_cflag = cflag;
+ if (tty->driver->set_termios)
+ tty->driver->set_termios(tty, &old_termios);
+ unlock_kernel();
+
+ priv->io.speed = speed;
+
+ return 0;
+}
+
+/*
+ * Function irtty_set_dtr_rts (dev, dtr, rts)
+ *
+ * This function can be used by dongles etc. to set or reset the status
+ * of the dtr and rts lines
+ */
+
+static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
+{
+ struct sirtty_cb *priv = dev->priv;
+ int set = 0;
+ int clear = 0;
+
+ IRDA_ASSERT(priv != NULL, return -1;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
+
+ if (rts)
+ set |= TIOCM_RTS;
+ else
+ clear |= TIOCM_RTS;
+ if (dtr)
+ set |= TIOCM_DTR;
+ else
+ clear |= TIOCM_DTR;
+
+ /*
+ * We can't use ioctl() because it expects a non-null file structure,
+ * and we don't have that here.
+ * This function is not yet defined for all tty driver, so
+ * let's be careful... Jean II
+ */
+ IRDA_ASSERT(priv->tty->driver->tiocmset != NULL, return -1;);
+ priv->tty->driver->tiocmset(priv->tty, NULL, set, clear);
+
+ return 0;
+}
+
+/* ------------------------------------------------------- */
+
+/* called from sir_dev when there is more data to send
+ * context is either netdev->hard_xmit or some transmit-completion bh
+ * i.e. we are under spinlock here and must not sleep.
+ */
+
+static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t len)
+{
+ struct sirtty_cb *priv = dev->priv;
+ struct tty_struct *tty;
+ int writelen;
+
+ IRDA_ASSERT(priv != NULL, return -1;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
+
+ tty = priv->tty;
+ if (!tty->driver->write)
+ return 0;
+ tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+ if (tty->driver->write_room) {
+ writelen = tty->driver->write_room(tty);
+ if (writelen > len)
+ writelen = len;
+ }
+ else
+ writelen = len;
+ return tty->driver->write(tty, ptr, writelen);
+}
+
+/* ------------------------------------------------------- */
+
+/* irda line discipline callbacks */
+
+/*
+ * Function irtty_receive_buf( tty, cp, count)
+ *
+ * Handle the 'receiver data ready' interrupt. This function is called
+ * by the 'tty_io' module in the kernel when a block of IrDA data has
+ * been received, which can now be decapsulated and delivered for
+ * further processing
+ *
+ * calling context depends on underlying driver and tty->low_latency!
+ * for example (low_latency: 1 / 0):
+ * serial.c: uart-interrupt / softint
+ * usbserial: urb-complete-interrupt / softint
+ */
+
+static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct sir_dev *dev;
+ struct sirtty_cb *priv = tty->disc_data;
+ int i;
+
+ IRDA_ASSERT(priv != NULL, return;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;);
+
+ if (unlikely(count==0)) /* yes, this happens */
+ return;
+
+ dev = priv->dev;
+ if (!dev) {
+ IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+ return;
+ }
+
+ for (i = 0; i < count; i++) {
+ /*
+ * Characters received with a parity error, etc?
+ */
+ if (fp && *fp++) {
+ IRDA_DEBUG(0, "Framing or parity error!\n");
+ sirdev_receive(dev, NULL, 0); /* notify sir_dev (updating stats) */
+ return;
+ }
+ }
+
+ sirdev_receive(dev, cp, count);
+}
+
+/*
+ * Function irtty_receive_room (tty)
+ *
+ * Used by the TTY to find out how much data we can receive at a time
+ *
+*/
+static int irtty_receive_room(struct tty_struct *tty)
+{
+ struct sirtty_cb *priv = tty->disc_data;
+
+ IRDA_ASSERT(priv != NULL, return 0;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return 0;);
+
+ return 65536; /* We can handle an infinite amount of data. :-) */
+}
+
+/*
+ * Function irtty_write_wakeup (tty)
+ *
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ *
+ */
+static void irtty_write_wakeup(struct tty_struct *tty)
+{
+ struct sirtty_cb *priv = tty->disc_data;
+
+ IRDA_ASSERT(priv != NULL, return;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;);
+
+ tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+
+ if (priv->dev)
+ sirdev_write_complete(priv->dev);
+}
+
+/* ------------------------------------------------------- */
+
+/*
+ * Function irtty_stop_receiver (tty, stop)
+ *
+ */
+
+static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
+{
+ struct termios old_termios;
+ int cflag;
+
+ lock_kernel();
+ old_termios = *(tty->termios);
+ cflag = tty->termios->c_cflag;
+
+ if (stop)
+ cflag &= ~CREAD;
+ else
+ cflag |= CREAD;
+
+ tty->termios->c_cflag = cflag;
+ if (tty->driver->set_termios)
+ tty->driver->set_termios(tty, &old_termios);
+ unlock_kernel();
+}
+
+/*****************************************************************/
+
+/* serialize ldisc open/close with sir_dev */
+static DECLARE_MUTEX(irtty_sem);
+
+/* notifier from sir_dev when irda% device gets opened (ifup) */
+
+static int irtty_start_dev(struct sir_dev *dev)
+{
+ struct sirtty_cb *priv;
+ struct tty_struct *tty;
+
+ /* serialize with ldisc open/close */
+ down(&irtty_sem);
+
+ priv = dev->priv;
+ if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
+ up(&irtty_sem);
+ return -ESTALE;
+ }
+
+ tty = priv->tty;
+
+ if (tty->driver->start)
+ tty->driver->start(tty);
+ /* Make sure we can receive more data */
+ irtty_stop_receiver(tty, FALSE);
+
+ up(&irtty_sem);
+ return 0;
+}
+
+/* notifier from sir_dev when irda% device gets closed (ifdown) */
+
+static int irtty_stop_dev(struct sir_dev *dev)
+{
+ struct sirtty_cb *priv;
+ struct tty_struct *tty;
+
+ /* serialize with ldisc open/close */
+ down(&irtty_sem);
+
+ priv = dev->priv;
+ if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
+ up(&irtty_sem);
+ return -ESTALE;
+ }
+
+ tty = priv->tty;
+
+ /* Make sure we don't receive more data */
+ irtty_stop_receiver(tty, TRUE);
+ if (tty->driver->stop)
+ tty->driver->stop(tty);
+
+ up(&irtty_sem);
+
+ return 0;
+}
+
+/* ------------------------------------------------------- */
+
+static struct sir_driver sir_tty_drv = {
+ .owner = THIS_MODULE,
+ .driver_name = "sir_tty",
+ .start_dev = irtty_start_dev,
+ .stop_dev = irtty_stop_dev,
+ .do_write = irtty_do_write,
+ .chars_in_buffer = irtty_chars_in_buffer,
+ .wait_until_sent = irtty_wait_until_sent,
+ .set_speed = irtty_change_speed,
+ .set_dtr_rts = irtty_set_dtr_rts,
+};
+
+/* ------------------------------------------------------- */
+
+/*
+ * Function irtty_ioctl (tty, file, cmd, arg)
+ *
+ * The Swiss army knife of system calls :-)
+ *
+ */
+static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct irtty_info { char name[6]; } info;
+ struct sir_dev *dev;
+ struct sirtty_cb *priv = tty->disc_data;
+ int err = 0;
+
+ IRDA_ASSERT(priv != NULL, return -ENODEV;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
+
+ IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd);
+
+ dev = priv->dev;
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ switch (cmd) {
+ case TCGETS:
+ case TCGETA:
+ err = n_tty_ioctl(tty, file, cmd, arg);
+ break;
+
+ case IRTTY_IOCTDONGLE:
+ /* this call blocks for completion */
+ err = sirdev_set_dongle(dev, (IRDA_DONGLE) arg);
+ break;
+
+ case IRTTY_IOCGET:
+ IRDA_ASSERT(dev->netdev != NULL, return -1;);
+
+ memset(&info, 0, sizeof(info));
+ strncpy(info.name, dev->netdev->name, sizeof(info.name)-1);
+
+ if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+ err = -EFAULT;
+ break;
+ default:
+ err = -ENOIOCTLCMD;
+ break;
+ }
+ return err;
+}
+
+
+/*
+ * Function irtty_open(tty)
+ *
+ * This function is called by the TTY module when the IrDA line
+ * discipline is called for. Because we are sure the tty line exists,
+ * we only have to link it to a free IrDA channel.
+ */
+static int irtty_open(struct tty_struct *tty)
+{
+ struct sir_dev *dev;
+ struct sirtty_cb *priv;
+ int ret = 0;
+
+ /* Module stuff handled via irda_ldisc.owner - Jean II */
+
+ /* First make sure we're not already connected. */
+ if (tty->disc_data != NULL) {
+ priv = tty->disc_data;
+ if (priv && priv->magic == IRTTY_MAGIC) {
+ ret = -EEXIST;
+ goto out;
+ }
+ tty->disc_data = NULL; /* ### */
+ }
+
+ /* stop the underlying driver */
+ irtty_stop_receiver(tty, TRUE);
+ if (tty->driver->stop)
+ tty->driver->stop(tty);
+
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+
+ /* apply mtt override */
+ sir_tty_drv.qos_mtt_bits = qos_mtt_bits;
+
+ /* get a sir device instance for this driver */
+ dev = sirdev_get_instance(&sir_tty_drv, tty->name);
+ if (!dev) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* allocate private device info block */
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ goto out_put;
+ memset(priv, 0, sizeof(*priv));
+
+ priv->magic = IRTTY_MAGIC;
+ priv->tty = tty;
+ priv->dev = dev;
+
+ /* serialize with start_dev - in case we were racing with ifup */
+ down(&irtty_sem);
+
+ dev->priv = priv;
+ tty->disc_data = priv;
+
+ up(&irtty_sem);
+
+ IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
+
+ return 0;
+
+out_put:
+ sirdev_put_instance(dev);
+out:
+ return ret;
+}
+
+/*
+ * Function irtty_close (tty)
+ *
+ * Close down a IrDA channel. This means flushing out any pending queues,
+ * and then restoring the TTY line discipline to what it was before it got
+ * hooked to IrDA (which usually is TTY again).
+ */
+static void irtty_close(struct tty_struct *tty)
+{
+ struct sirtty_cb *priv = tty->disc_data;
+
+ IRDA_ASSERT(priv != NULL, return;);
+ IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;);
+
+ /* Hm, with a dongle attached the dongle driver wants
+ * to close the dongle - which requires the use of
+ * some tty write and/or termios or ioctl operations.
+ * Are we allowed to call those when already requested
+ * to shutdown the ldisc?
+ * If not, we should somehow mark the dev being staled.
+ * Question remains, how to close the dongle in this case...
+ * For now let's assume we are granted to issue tty driver calls
+ * until we return here from the ldisc close. I'm just wondering
+ * how this behaves with hotpluggable serial hardware like
+ * rs232-pcmcia card or usb-serial...
+ *
+ * priv->tty = NULL?;
+ */
+
+ /* we are dead now */
+ tty->disc_data = NULL;
+
+ sirdev_put_instance(priv->dev);
+
+ /* Stop tty */
+ irtty_stop_receiver(tty, TRUE);
+ tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+ if (tty->driver->stop)
+ tty->driver->stop(tty);
+
+ kfree(priv);
+
+ IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name);
+}
+
+/* ------------------------------------------------------- */
+
+static struct tty_ldisc irda_ldisc = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "irda",
+ .flags = 0,
+ .open = irtty_open,
+ .close = irtty_close,
+ .read = NULL,
+ .write = NULL,
+ .ioctl = irtty_ioctl,
+ .poll = NULL,
+ .receive_buf = irtty_receive_buf,
+ .receive_room = irtty_receive_room,
+ .write_wakeup = irtty_write_wakeup,
+ .owner = THIS_MODULE,
+};
+
+/* ------------------------------------------------------- */
+
+static int __init irtty_sir_init(void)
+{
+ int err;
+
+ if ((err = tty_register_ldisc(N_IRDA, &irda_ldisc)) != 0)
+ IRDA_ERROR("IrDA: can't register line discipline (err = %d)\n",
+ err);
+ return err;
+}
+
+static void __exit irtty_sir_cleanup(void)
+{
+ int err;
+
+ if ((err = tty_register_ldisc(N_IRDA, NULL))) {
+ IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n",
+ __FUNCTION__, err);
+ }
+}
+
+module_init(irtty_sir_init);
+module_exit(irtty_sir_cleanup);
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("IrDA TTY device driver");
+MODULE_ALIAS_LDISC(N_IRDA);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/irda/irtty-sir.h b/drivers/net/irda/irtty-sir.h
new file mode 100644
index 000000000000..b132d8f6eb13
--- /dev/null
+++ b/drivers/net/irda/irtty-sir.h
@@ -0,0 +1,34 @@
+/*********************************************************************
+ *
+ * sir_tty.h: definitions for the irtty_sir client driver (former irtty)
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef IRTTYSIR_H
+#define IRTTYSIR_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h> // chipio_t
+
+#define IRTTY_IOC_MAGIC 'e'
+#define IRTTY_IOCTDONGLE _IO(IRTTY_IOC_MAGIC, 1)
+#define IRTTY_IOCGET _IOR(IRTTY_IOC_MAGIC, 2, struct irtty_info)
+#define IRTTY_IOC_MAXNR 2
+
+struct sirtty_cb {
+ magic_t magic;
+
+ struct sir_dev *dev;
+ struct tty_struct *tty;
+
+ chipio_t io; /* IrDA controller information */
+};
+
+#endif
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
new file mode 100644
index 000000000000..73261c54bbfd
--- /dev/null
+++ b/drivers/net/irda/litelink-sir.c
@@ -0,0 +1,209 @@
+/*********************************************************************
+ *
+ * Filename: litelink.c
+ * Version: 1.1
+ * Description: Driver for the Parallax LiteLink dongle
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Fri May 7 12:50:33 1999
+ * Modified at: Fri Dec 17 09:14:23 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+/*
+ * Modified at: Thu Jan 15 2003
+ * Modified by: Eugene Crosser <crosser@average.org>
+ *
+ * Convert to "new" IRDA infrastructure for kernel 2.6
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
+#define MAX_DELAY 10000 /* 1 ms */
+
+static int litelink_open(struct sir_dev *dev);
+static int litelink_close(struct sir_dev *dev);
+static int litelink_change_speed(struct sir_dev *dev, unsigned speed);
+static int litelink_reset(struct sir_dev *dev);
+
+/* These are the baudrates supported - 9600 must be last one! */
+static unsigned baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
+
+static struct dongle_driver litelink = {
+ .owner = THIS_MODULE,
+ .driver_name = "Parallax LiteLink",
+ .type = IRDA_LITELINK_DONGLE,
+ .open = litelink_open,
+ .close = litelink_close,
+ .reset = litelink_reset,
+ .set_speed = litelink_change_speed,
+};
+
+static int __init litelink_sir_init(void)
+{
+ return irda_register_dongle(&litelink);
+}
+
+static void __exit litelink_sir_cleanup(void)
+{
+ irda_unregister_dongle(&litelink);
+}
+
+static int litelink_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power up dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Set the speeds we can accept */
+ qos->baud_rate.bits &= IR_115200|IR_57600|IR_38400|IR_19200|IR_9600;
+ qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int litelink_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function litelink_change_speed (task)
+ *
+ * Change speed of the Litelink dongle. To cycle through the available
+ * baud rates, pulse RTS low for a few ms.
+ */
+static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ int i;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* dongle already reset by irda-thread - current speed (dongle and
+ * port) is the default speed (115200 for litelink!)
+ */
+
+ /* Cycle through avaiable baudrates until we reach the correct one */
+ for (i = 0; baud_rates[i] != speed; i++) {
+
+ /* end-of-list reached due to invalid speed request */
+ if (baud_rates[i] == 9600)
+ break;
+
+ /* Set DTR, clear RTS */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Set DTR, Set RTS */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+ }
+
+ dev->speed = baud_rates[i];
+
+ /* invalid baudrate should not happen - but if, we return -EINVAL and
+ * the dongle configured for 9600 so the stack has a chance to recover
+ */
+
+ return (dev->speed == speed) ? 0 : -EINVAL;
+}
+
+/*
+ * Function litelink_reset (task)
+ *
+ * Reset the Litelink type dongle.
+ *
+ */
+static int litelink_reset(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* probably the power-up can be dropped here, but with only
+ * 15 usec delay it's not worth the risk unless somebody with
+ * the hardware confirms it doesn't break anything...
+ */
+
+ /* Power on dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Clear RTS to reset dongle */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* This dongles speed defaults to 115200 bps */
+ dev->speed = 115200;
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Parallax Litelink dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Litelink module
+ *
+ */
+module_init(litelink_sir_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Litelink module
+ *
+ */
+module_exit(litelink_sir_cleanup);
diff --git a/drivers/net/irda/litelink.c b/drivers/net/irda/litelink.c
new file mode 100644
index 000000000000..7db11431d0f4
--- /dev/null
+++ b/drivers/net/irda/litelink.c
@@ -0,0 +1,179 @@
+/*********************************************************************
+ *
+ * Filename: litelink.c
+ * Version: 1.1
+ * Description: Driver for the Parallax LiteLink dongle
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Fri May 7 12:50:33 1999
+ * Modified at: Fri Dec 17 09:14:23 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
+#define MAX_DELAY 10000 /* 1 ms */
+
+static void litelink_open(dongle_t *self, struct qos_info *qos);
+static void litelink_close(dongle_t *self);
+static int litelink_change_speed(struct irda_task *task);
+static int litelink_reset(struct irda_task *task);
+
+/* These are the baudrates supported */
+static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
+
+static struct dongle_reg dongle = {
+ .type = IRDA_LITELINK_DONGLE,
+ .open = litelink_open,
+ .close = litelink_close,
+ .reset = litelink_reset,
+ .change_speed = litelink_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init litelink_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit litelink_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void litelink_open(dongle_t *self, struct qos_info *qos)
+{
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
+}
+
+static void litelink_close(dongle_t *self)
+{
+ /* Power off dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function litelink_change_speed (task)
+ *
+ * Change speed of the Litelink dongle. To cycle through the available
+ * baud rates, pulse RTS low for a few ms.
+ */
+static int litelink_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ int i;
+
+ /* Clear RTS to reset dongle */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Cycle through avaiable baudrates until we reach the correct one */
+ for (i=0; i<5 && baud_rates[i] != speed; i++) {
+ /* Set DTR, clear RTS */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Set DTR, Set RTS */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+ }
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+/*
+ * Function litelink_reset (task)
+ *
+ * Reset the Litelink type dongle.
+ *
+ */
+static int litelink_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+
+ /* Power on dongle */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Clear RTS to reset dongle */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* This dongles speed defaults to 115200 bps */
+ self->speed = 115200;
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Parallax Litelink dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Litelink module
+ *
+ */
+module_init(litelink_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Litelink module
+ *
+ */
+module_exit(litelink_cleanup);
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
new file mode 100644
index 000000000000..ebed168b7da6
--- /dev/null
+++ b/drivers/net/irda/ma600-sir.c
@@ -0,0 +1,264 @@
+/*********************************************************************
+ *
+ * Filename: ma600.c
+ * Version: 0.1
+ * Description: Implementation of the MA600 dongle
+ * Status: Experimental.
+ * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
+ * Created at: Sat Jun 10 20:02:35 2000
+ * Modified at: Sat Aug 16 09:34:13 2003
+ * Modified by: Martin Diehl <mad@mdiehl.de> (modified for new sir_dev)
+ *
+ * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
+ * information on the MA600 dongle
+ *
+ * Copyright (c) 2000 Leung, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int ma600_open(struct sir_dev *);
+static int ma600_close(struct sir_dev *);
+static int ma600_change_speed(struct sir_dev *, unsigned);
+static int ma600_reset(struct sir_dev *);
+
+/* control byte for MA600 */
+#define MA600_9600 0x00
+#define MA600_19200 0x01
+#define MA600_38400 0x02
+#define MA600_57600 0x03
+#define MA600_115200 0x04
+#define MA600_DEV_ID1 0x05
+#define MA600_DEV_ID2 0x06
+#define MA600_2400 0x08
+
+static struct dongle_driver ma600 = {
+ .owner = THIS_MODULE,
+ .driver_name = "MA600",
+ .type = IRDA_MA600_DONGLE,
+ .open = ma600_open,
+ .close = ma600_close,
+ .reset = ma600_reset,
+ .set_speed = ma600_change_speed,
+};
+
+
+static int __init ma600_sir_init(void)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ return irda_register_dongle(&ma600);
+}
+
+static void __exit ma600_sir_cleanup(void)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ irda_unregister_dongle(&ma600);
+}
+
+/*
+ Power on:
+ (0) Clear RTS and DTR for 1 second
+ (1) Set RTS and DTR for 1 second
+ (2) 9600 bps now
+ Note: assume RTS, DTR are clear before
+*/
+static int ma600_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Explicitly set the speeds we can accept */
+ qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
+ |IR_57600|IR_115200;
+ /* Hm, 0x01 means 10ms - for >= 1ms we would need 0x07 */
+ qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int ma600_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+static __u8 get_control_byte(__u32 speed)
+{
+ __u8 byte;
+
+ switch (speed) {
+ default:
+ case 115200:
+ byte = MA600_115200;
+ break;
+ case 57600:
+ byte = MA600_57600;
+ break;
+ case 38400:
+ byte = MA600_38400;
+ break;
+ case 19200:
+ byte = MA600_19200;
+ break;
+ case 9600:
+ byte = MA600_9600;
+ break;
+ case 2400:
+ byte = MA600_2400;
+ break;
+ }
+
+ return byte;
+}
+
+/*
+ * Function ma600_change_speed (dev, speed)
+ *
+ * Set the speed for the MA600 type dongle.
+ *
+ * The dongle has already been reset to a known state (dongle default)
+ * We cycle through speeds by pulsing RTS low and then high.
+ */
+
+/*
+ * Function ma600_change_speed (dev, speed)
+ *
+ * Set the speed for the MA600 type dongle.
+ *
+ * Algorithm
+ * 1. Reset (already done by irda thread state machine)
+ * 2. clear RTS, set DTR and wait for 1ms
+ * 3. send Control Byte to the MA600 through TXD to set new baud rate
+ * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
+ * it takes about 10 msec)
+ * 4. set RTS, set DTR (return to NORMAL Operation)
+ * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
+ * after
+ */
+
+/* total delays are only about 20ms - let's just sleep for now to
+ * avoid the state machine complexity before we get things working
+ */
+
+static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ u8 byte;
+
+ IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+ speed, dev->speed);
+
+ /* dongle already reset, dongle and port at default speed (9600) */
+
+ /* Set RTS low for 1 ms */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ mdelay(1);
+
+ /* Write control byte */
+ byte = get_control_byte(speed);
+ sirdev_raw_write(dev, &byte, sizeof(byte));
+
+ /* Wait at least 10ms: fake wait_until_sent - 10 bits at 9600 baud*/
+ msleep(15); /* old ma600 uses 15ms */
+
+#if 1
+ /* read-back of the control byte. ma600 is the first dongle driver
+ * which uses this so there might be some unidentified issues.
+ * Disable this in case of problems with readback.
+ */
+
+ sirdev_raw_read(dev, &byte, sizeof(byte));
+ if (byte != get_control_byte(speed)) {
+ IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
+ __FUNCTION__, (unsigned) byte,
+ (unsigned) get_control_byte(speed));
+ return -1;
+ }
+ else
+ IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
+#endif
+
+ /* Set DTR, Set RTS */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Wait at least 10ms */
+ msleep(10);
+
+ /* dongle is now switched to the new speed */
+ dev->speed = speed;
+
+ return 0;
+}
+
+/*
+ * Function ma600_reset (dev)
+ *
+ * This function resets the ma600 dongle.
+ *
+ * Algorithm:
+ * 0. DTR=0, RTS=1 and wait 10 ms
+ * 1. DTR=1, RTS=1 and wait 10 ms
+ * 2. 9600 bps now
+ */
+
+/* total delays are only about 20ms - let's just sleep for now to
+ * avoid the state machine complexity before we get things working
+ */
+
+int ma600_reset(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Reset the dongle : set DTR low for 10 ms */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+ msleep(10);
+
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ msleep(10);
+
+ dev->speed = 9600; /* That's the dongle-default */
+
+ return 0;
+}
+
+MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
+MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
+
+module_init(ma600_sir_init);
+module_exit(ma600_sir_cleanup);
+
diff --git a/drivers/net/irda/ma600.c b/drivers/net/irda/ma600.c
new file mode 100644
index 000000000000..f5e6836667fd
--- /dev/null
+++ b/drivers/net/irda/ma600.c
@@ -0,0 +1,354 @@
+/*********************************************************************
+ *
+ * Filename: ma600.c
+ * Version: 0.1
+ * Description: Implementation of the MA600 dongle
+ * Status: Experimental.
+ * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
+ * Created at: Sat Jun 10 20:02:35 2000
+ * Modified at:
+ * Modified by:
+ *
+ * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
+ * information on the MA600 dongle
+ *
+ * Copyright (c) 2000 Leung, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+/* define this macro for release version */
+//#define NDEBUG
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#ifndef NDEBUG
+ #undef IRDA_DEBUG
+ #define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
+
+ #undef ASSERT
+ #define ASSERT(expr, func) \
+ if(!(expr)) { \
+ printk( "Assertion failed! %s,%s,%s,line=%d\n",\
+ #expr,__FILE__,__FUNCTION__,__LINE__); \
+ func}
+#endif
+
+/* convert hex value to ascii hex */
+static const char hexTbl[] = "0123456789ABCDEF";
+
+
+static void ma600_open(dongle_t *self, struct qos_info *qos);
+static void ma600_close(dongle_t *self);
+static int ma600_change_speed(struct irda_task *task);
+static int ma600_reset(struct irda_task *task);
+
+/* control byte for MA600 */
+#define MA600_9600 0x00
+#define MA600_19200 0x01
+#define MA600_38400 0x02
+#define MA600_57600 0x03
+#define MA600_115200 0x04
+#define MA600_DEV_ID1 0x05
+#define MA600_DEV_ID2 0x06
+#define MA600_2400 0x08
+
+static struct dongle_reg dongle = {
+ .type = IRDA_MA600_DONGLE,
+ .open = ma600_open,
+ .close = ma600_close,
+ .reset = ma600_reset,
+ .change_speed = ma600_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init ma600_init(void)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit ma600_cleanup(void)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ irda_device_unregister_dongle(&dongle);
+}
+
+/*
+ Power on:
+ (0) Clear RTS and DTR for 1 second
+ (1) Set RTS and DTR for 1 second
+ (2) 9600 bps now
+ Note: assume RTS, DTR are clear before
+*/
+static void ma600_open(dongle_t *self, struct qos_info *qos)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
+ |IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
+ irda_qos_bits_to_value(qos);
+
+ //self->set_dtr_rts(self->dev, FALSE, FALSE);
+ // should wait 1 second
+
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ // should wait 1 second
+}
+
+static void ma600_close(dongle_t *self)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+static __u8 get_control_byte(__u32 speed)
+{
+ __u8 byte;
+
+ switch (speed) {
+ default:
+ case 115200:
+ byte = MA600_115200;
+ break;
+ case 57600:
+ byte = MA600_57600;
+ break;
+ case 38400:
+ byte = MA600_38400;
+ break;
+ case 19200:
+ byte = MA600_19200;
+ break;
+ case 9600:
+ byte = MA600_9600;
+ break;
+ case 2400:
+ byte = MA600_2400;
+ break;
+ }
+
+ return byte;
+}
+
+/*
+ * Function ma600_change_speed (dev, state, speed)
+ *
+ * Set the speed for the MA600 type dongle. Warning, this
+ * function must be called with a process context!
+ *
+ * Algorithm
+ * 1. Reset
+ * 2. clear RTS, set DTR and wait for 1ms
+ * 3. send Control Byte to the MA600 through TXD to set new baud rate
+ * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
+ * it takes about 10 msec)
+ * 4. set RTS, set DTR (return to NORMAL Operation)
+ * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
+ * after
+ */
+static int ma600_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ static __u8 byte;
+ __u8 byte_echo;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ ASSERT(task != NULL, return -1;);
+
+ if (self->speed_task && self->speed_task != task) {
+ IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
+ return msecs_to_jiffies(10);
+ } else {
+ self->speed_task = task;
+ }
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ case IRDA_TASK_CHILD_INIT:
+ /*
+ * Need to reset the dongle and go to 9600 bps before
+ * programming
+ */
+ if (irda_task_execute(self, ma600_reset, NULL, task,
+ (void *) speed)) {
+ /* Dongle need more time to reset */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* give 1 second to finish */
+ ret = msecs_to_jiffies(1000);
+ } else {
+ irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
+ }
+ break;
+
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), resetting dongle timed out!\n",
+ __FUNCTION__);
+ ret = -1;
+ break;
+
+ case IRDA_TASK_CHILD_DONE:
+ /* Set DTR, Clear RTS */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+
+ ret = msecs_to_jiffies(1); /* Sleep 1 ms */
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+ break;
+
+ case IRDA_TASK_WAIT:
+ speed = (__u32) task->param;
+ byte = get_control_byte(speed);
+
+ /* Write control byte */
+ self->write(self->dev, &byte, sizeof(byte));
+
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+
+ /* Wait at least 10 ms */
+ ret = msecs_to_jiffies(15);
+ break;
+
+ case IRDA_TASK_WAIT1:
+ /* Read control byte echo */
+ self->read(self->dev, &byte_echo, sizeof(byte_echo));
+
+ if(byte != byte_echo) {
+ /* if control byte != echo, I don't know what to do */
+ printk(KERN_WARNING "%s() control byte written != read!\n", __FUNCTION__);
+ printk(KERN_WARNING "control byte = 0x%c%c\n",
+ hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
+ printk(KERN_WARNING "byte echo = 0x%c%c\n",
+ hexTbl[(byte_echo>>4) & 0x0f],
+ hexTbl[byte_echo & 0x0f]);
+ #ifndef NDEBUG
+ } else {
+ IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
+ #endif
+ }
+
+ /* Set DTR, Set RTS */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+
+ /* Wait at least 10 ms */
+ ret = msecs_to_jiffies(10);
+ break;
+
+ case IRDA_TASK_WAIT2:
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ break;
+
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function ma600_reset (driver)
+ *
+ * This function resets the ma600 dongle. Warning, this function
+ * must be called with a process context!!
+ *
+ * Algorithm:
+ * 0. DTR=0, RTS=1 and wait 10 ms
+ * 1. DTR=1, RTS=1 and wait 10 ms
+ * 2. 9600 bps now
+ */
+int ma600_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ ASSERT(task != NULL, return -1;);
+
+ if (self->reset_task && self->reset_task != task) {
+ IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
+ return msecs_to_jiffies(10);
+ } else
+ self->reset_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Clear DTR and Set RTS */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+ ret = msecs_to_jiffies(10); /* Sleep 10 ms */
+ break;
+ case IRDA_TASK_WAIT1:
+ /* Set DTR and RTS */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+ ret = msecs_to_jiffies(10); /* Sleep 10 ms */
+ break;
+ case IRDA_TASK_WAIT2:
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
+MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize MA600 module
+ *
+ */
+module_init(ma600_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup MA600 module
+ *
+ */
+module_exit(ma600_cleanup);
+
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
new file mode 100644
index 000000000000..67bd016e4df8
--- /dev/null
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -0,0 +1,230 @@
+/*********************************************************************
+ *
+ *
+ * Filename: mcp2120.c
+ * Version: 1.0
+ * Description: Implementation for the MCP2120 (Microchip)
+ * Status: Experimental.
+ * Author: Felix Tang (tangf@eyetap.org)
+ * Created at: Sun Mar 31 19:32:12 EST 2002
+ * Based on code by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 2002 Felix Tang, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int mcp2120_reset(struct sir_dev *dev);
+static int mcp2120_open(struct sir_dev *dev);
+static int mcp2120_close(struct sir_dev *dev);
+static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed);
+
+#define MCP2120_9600 0x87
+#define MCP2120_19200 0x8B
+#define MCP2120_38400 0x85
+#define MCP2120_57600 0x83
+#define MCP2120_115200 0x81
+
+#define MCP2120_COMMIT 0x11
+
+static struct dongle_driver mcp2120 = {
+ .owner = THIS_MODULE,
+ .driver_name = "Microchip MCP2120",
+ .type = IRDA_MCP2120_DONGLE,
+ .open = mcp2120_open,
+ .close = mcp2120_close,
+ .reset = mcp2120_reset,
+ .set_speed = mcp2120_change_speed,
+};
+
+static int __init mcp2120_sir_init(void)
+{
+ return irda_register_dongle(&mcp2120);
+}
+
+static void __exit mcp2120_sir_cleanup(void)
+{
+ irda_unregister_dongle(&mcp2120);
+}
+
+static int mcp2120_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* seems no explicit power-on required here and reset switching it on anyway */
+
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x01;
+ irda_qos_bits_to_value(qos);
+
+ return 0;
+}
+
+static int mcp2120_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ /* reset and inhibit mcp2120 */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ // sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function mcp2120_change_speed (dev, speed)
+ *
+ * Set the speed for the MCP2120.
+ *
+ */
+
+#define MCP2120_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED+1)
+
+static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 control[2];
+ static int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ switch (state) {
+ case SIRDEV_STATE_DONGLE_SPEED:
+ /* Set DTR to enter command mode */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+ udelay(500);
+
+ ret = 0;
+ switch (speed) {
+ default:
+ speed = 9600;
+ ret = -EINVAL;
+ /* fall through */
+ case 9600:
+ control[0] = MCP2120_9600;
+ //printk("mcp2120 9600\n");
+ break;
+ case 19200:
+ control[0] = MCP2120_19200;
+ //printk("mcp2120 19200\n");
+ break;
+ case 34800:
+ control[0] = MCP2120_38400;
+ //printk("mcp2120 38400\n");
+ break;
+ case 57600:
+ control[0] = MCP2120_57600;
+ //printk("mcp2120 57600\n");
+ break;
+ case 115200:
+ control[0] = MCP2120_115200;
+ //printk("mcp2120 115200\n");
+ break;
+ }
+ control[1] = MCP2120_COMMIT;
+
+ /* Write control bytes */
+ sirdev_raw_write(dev, control, 2);
+ dev->speed = speed;
+
+ state = MCP2120_STATE_WAIT_SPEED;
+ delay = 100;
+ //printk("mcp2120_change_speed: dongle_speed\n");
+ break;
+
+ case MCP2120_STATE_WAIT_SPEED:
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+ //printk("mcp2120_change_speed: mcp_wait\n");
+ break;
+
+ default:
+ IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state);
+ ret = -EINVAL;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+/*
+ * Function mcp2120_reset (driver)
+ *
+ * This function resets the mcp2120 dongle.
+ *
+ * Info: -set RTS to reset mcp2120
+ * -set DTR to set mcp2120 software command mode
+ * -mcp2120 defaults to 9600 baud after reset
+ *
+ * Algorithm:
+ * 0. Set RTS to reset mcp2120.
+ * 1. Clear RTS and wait for device reset timer of 30 ms (max).
+ *
+ */
+
+#define MCP2120_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1)
+#define MCP2120_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2)
+
+static int mcp2120_reset(struct sir_dev *dev)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ switch (state) {
+ case SIRDEV_STATE_DONGLE_RESET:
+ //printk("mcp2120_reset: dongle_reset\n");
+ /* Reset dongle by setting RTS*/
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ state = MCP2120_STATE_WAIT1_RESET;
+ delay = 50;
+ break;
+
+ case MCP2120_STATE_WAIT1_RESET:
+ //printk("mcp2120_reset: mcp2120_wait1\n");
+ /* clear RTS and wait for at least 30 ms. */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+ state = MCP2120_STATE_WAIT2_RESET;
+ delay = 50;
+ break;
+
+ case MCP2120_STATE_WAIT2_RESET:
+ //printk("mcp2120_reset mcp2120_wait2\n");
+ /* Go back to normal mode */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+ break;
+
+ default:
+ IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+ ret = -EINVAL;
+ break;
+ }
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
+MODULE_DESCRIPTION("Microchip MCP2120");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
+
+module_init(mcp2120_sir_init);
+module_exit(mcp2120_sir_cleanup);
diff --git a/drivers/net/irda/mcp2120.c b/drivers/net/irda/mcp2120.c
new file mode 100644
index 000000000000..5e6199eeef4f
--- /dev/null
+++ b/drivers/net/irda/mcp2120.c
@@ -0,0 +1,240 @@
+/*********************************************************************
+ *
+ *
+ * Filename: mcp2120.c
+ * Version: 1.0
+ * Description: Implementation for the MCP2120 (Microchip)
+ * Status: Experimental.
+ * Author: Felix Tang (tangf@eyetap.org)
+ * Created at: Sun Mar 31 19:32:12 EST 2002
+ * Based on code by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 2002 Felix Tang, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+static int mcp2120_reset(struct irda_task *task);
+static void mcp2120_open(dongle_t *self, struct qos_info *qos);
+static void mcp2120_close(dongle_t *self);
+static int mcp2120_change_speed(struct irda_task *task);
+
+#define MCP2120_9600 0x87
+#define MCP2120_19200 0x8B
+#define MCP2120_38400 0x85
+#define MCP2120_57600 0x83
+#define MCP2120_115200 0x81
+
+#define MCP2120_COMMIT 0x11
+
+static struct dongle_reg dongle = {
+ .type = IRDA_MCP2120_DONGLE,
+ .open = mcp2120_open,
+ .close = mcp2120_close,
+ .reset = mcp2120_reset,
+ .change_speed = mcp2120_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init mcp2120_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit mcp2120_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void mcp2120_open(dongle_t *self, struct qos_info *qos)
+{
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x01;
+}
+
+static void mcp2120_close(dongle_t *self)
+{
+ /* Power off dongle */
+ /* reset and inhibit mcp2120 */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ //self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function mcp2120_change_speed (dev, speed)
+ *
+ * Set the speed for the MCP2120.
+ *
+ */
+static int mcp2120_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ __u8 control[2];
+ int ret = 0;
+
+ self->speed_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ /* Need to reset the dongle and go to 9600 bps before
+ programming */
+ //printk("Dmcp2120_change_speed irda_task_init\n");
+ if (irda_task_execute(self, mcp2120_reset, NULL, task,
+ (void *) speed))
+ {
+ /* Dongle need more time to reset */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* Give reset 1 sec to finish */
+ ret = msecs_to_jiffies(1000);
+ }
+ break;
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), resetting dongle timed out!\n",
+ __FUNCTION__);
+ ret = -1;
+ break;
+ case IRDA_TASK_CHILD_DONE:
+ /* Set DTR to enter command mode */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+ udelay(500);
+
+ switch (speed) {
+ case 9600:
+ default:
+ control[0] = MCP2120_9600;
+ //printk("mcp2120 9600\n");
+ break;
+ case 19200:
+ control[0] = MCP2120_19200;
+ //printk("mcp2120 19200\n");
+ break;
+ case 34800:
+ control[0] = MCP2120_38400;
+ //printk("mcp2120 38400\n");
+ break;
+ case 57600:
+ control[0] = MCP2120_57600;
+ //printk("mcp2120 57600\n");
+ break;
+ case 115200:
+ control[0] = MCP2120_115200;
+ //printk("mcp2120 115200\n");
+ break;
+ }
+ control[1] = MCP2120_COMMIT;
+
+ /* Write control bytes */
+ self->write(self->dev, control, 2);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+ ret = msecs_to_jiffies(100);
+ //printk("mcp2120_change_speed irda_child_done\n");
+ break;
+ case IRDA_TASK_WAIT:
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ //printk("mcp2120_change_speed irda_task_wait\n");
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function mcp2120_reset (driver)
+ *
+ * This function resets the mcp2120 dongle.
+ *
+ * Info: -set RTS to reset mcp2120
+ * -set DTR to set mcp2120 software command mode
+ * -mcp2120 defaults to 9600 baud after reset
+ *
+ * Algorithm:
+ * 0. Set RTS to reset mcp2120.
+ * 1. Clear RTS and wait for device reset timer of 30 ms (max).
+ *
+ */
+
+
+static int mcp2120_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ int ret = 0;
+
+ self->reset_task = task;
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ //printk("mcp2120_reset irda_task_init\n");
+ /* Reset dongle by setting RTS*/
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+ ret = msecs_to_jiffies(50);
+ break;
+ case IRDA_TASK_WAIT1:
+ //printk("mcp2120_reset irda_task_wait1\n");
+ /* clear RTS and wait for at least 30 ms. */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+ ret = msecs_to_jiffies(50);
+ break;
+ case IRDA_TASK_WAIT2:
+ //printk("mcp2120_reset irda_task_wait2\n");
+ /* Go back to normal mode */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
+MODULE_DESCRIPTION("Microchip MCP2120");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize MCP2120 module
+ *
+ */
+module_init(mcp2120_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup MCP2120 module
+ *
+ */
+module_exit(mcp2120_cleanup);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
new file mode 100644
index 000000000000..805714ec9a8a
--- /dev/null
+++ b/drivers/net/irda/nsc-ircc.c
@@ -0,0 +1,2222 @@
+/*********************************************************************
+ *
+ * Filename: nsc-ircc.c
+ * Version: 1.0
+ * Description: Driver for the NSC PC'108 and PC'338 IrDA chipsets
+ * Status: Stable.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Nov 7 21:43:15 1998
+ * Modified at: Wed Mar 1 11:29:34 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
+ * Copyright (c) 1998 Actisys Corp., www.actisys.com
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Notice that all functions that needs to access the chip in _any_
+ * way, must save BSR register on entry, and restore it on exit.
+ * It is _very_ important to follow this policy!
+ *
+ * __u8 bank;
+ *
+ * bank = inb(iobase+BSR);
+ *
+ * do_your_stuff_here();
+ *
+ * outb(bank, iobase+BSR);
+ *
+ * If you find bugs in this file, its very likely that the same bug
+ * will also be in w83977af_ir.c since the implementations are quite
+ * similar.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "nsc-ircc.h"
+
+#define CHIP_IO_EXTENT 8
+#define BROKEN_DONGLE_ID
+
+static char *driver_name = "nsc-ircc";
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+static int dongle_id;
+
+/* Use BIOS settions by default, but user may supply module parameters */
+static unsigned int io[] = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0, 0 };
+
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
+
+/* These are the known NSC chips */
+static nsc_chip_t chips[] = {
+/* Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
+ { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0,
+ nsc_ircc_probe_108, nsc_ircc_init_108 },
+ { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8,
+ nsc_ircc_probe_338, nsc_ircc_init_338 },
+ /* Contributed by Steffen Pingel - IBM X40 */
+ { "PC8738x", { 0x164e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
+ nsc_ircc_probe_39x, nsc_ircc_init_39x },
+ /* Contributed by Jan Frey - IBM A30/A31 */
+ { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff,
+ nsc_ircc_probe_39x, nsc_ircc_init_39x },
+ { NULL }
+};
+
+/* Max 4 instances for now */
+static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+static char *dongle_types[] = {
+ "Differential serial interface",
+ "Differential serial interface",
+ "Reserved",
+ "Reserved",
+ "Sharp RY5HD01",
+ "Reserved",
+ "Single-ended serial interface",
+ "Consumer-IR only",
+ "HP HSDL-2300, HP HSDL-3600/HSDL-3610",
+ "IBM31T1100 or Temic TFDS6000/TFDS6500",
+ "Reserved",
+ "Reserved",
+ "HP HSDL-1100/HSDL-2100",
+ "HP HSDL-1100/HSDL-2100",
+ "Supports SIR Mode only",
+ "No dongle connected",
+};
+
+/* Some prototypes */
+static int nsc_ircc_open(int i, chipio_t *info);
+static int nsc_ircc_close(struct nsc_ircc_cb *self);
+static int nsc_ircc_setup(chipio_t *info);
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
+static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self);
+static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
+static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
+static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
+static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
+static int nsc_ircc_read_dongle_id (int iobase);
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
+
+static int nsc_ircc_net_open(struct net_device *dev);
+static int nsc_ircc_net_close(struct net_device *dev);
+static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/*
+ * Function nsc_ircc_init ()
+ *
+ * Initialize chip. Just try to find out how many chips we are dealing with
+ * and where they are
+ */
+static int __init nsc_ircc_init(void)
+{
+ chipio_t info;
+ nsc_chip_t *chip;
+ int ret = -ENODEV;
+ int cfg_base;
+ int cfg, id;
+ int reg;
+ int i = 0;
+
+ /* Probe for all the NSC chipsets we know about */
+ for (chip=chips; chip->name ; chip++) {
+ IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+ chip->name);
+
+ /* Try all config registers for this chip */
+ for (cfg=0; cfg<3; cfg++) {
+ cfg_base = chip->cfg[cfg];
+ if (!cfg_base)
+ continue;
+
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = io[i];
+ info.dma = dma[i];
+ info.irq = irq[i];
+
+ /* Read index register */
+ reg = inb(cfg_base);
+ if (reg == 0xff) {
+ IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+ continue;
+ }
+
+ /* Read chip identification register */
+ outb(chip->cid_index, cfg_base);
+ id = inb(cfg_base+1);
+ if ((id & chip->cid_mask) == chip->cid_value) {
+ IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
+ __FUNCTION__, chip->name, id & ~chip->cid_mask);
+ /*
+ * If the user supplies the base address, then
+ * we init the chip, if not we probe the values
+ * set by the BIOS
+ */
+ if (io[i] < 0x2000) {
+ chip->init(chip, &info);
+ } else
+ chip->probe(chip, &info);
+
+ if (nsc_ircc_open(i, &info) == 0)
+ ret = 0;
+ i++;
+ } else {
+ IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+ }
+ }
+
+ }
+
+ return ret;
+}
+
+/*
+ * Function nsc_ircc_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+static void __exit nsc_ircc_cleanup(void)
+{
+ int i;
+
+ pm_unregister_all(nsc_ircc_pmproc);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ nsc_ircc_close(dev_self[i]);
+ }
+}
+
+/*
+ * Function nsc_ircc_open (iobase, irq)
+ *
+ * Open driver instance
+ *
+ */
+static int __init nsc_ircc_open(int i, chipio_t *info)
+{
+ struct net_device *dev;
+ struct nsc_ircc_cb *self;
+ struct pm_dev *pmdev;
+ void *ret;
+ int err;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
+ info->cfg_base);
+
+ if ((nsc_ircc_setup(info)) == -1)
+ return -1;
+
+ IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
+
+ dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
+ if (dev == NULL) {
+ IRDA_ERROR("%s(), can't allocate memory for "
+ "control block!\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ self = dev->priv;
+ self->netdev = dev;
+ spin_lock_init(&self->lock);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->index = i;
+
+ /* Initialize IO */
+ self->io.cfg_base = info->cfg_base;
+ self->io.fir_base = info->fir_base;
+ self->io.irq = info->irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = info->dma;
+ self->io.fifo_size = 32;
+
+ /* Reserve the ioports that we need */
+ ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
+ if (!ret) {
+ IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__, self->io.fir_base);
+ err = -ENODEV;
+ goto out1;
+ }
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* The only value we must override it the baudrate */
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384;
+ self->tx_buff.truesize = 14384;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto out2;
+
+ }
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto out3;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Tx queue info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Override the network functions we need to use */
+ SET_MODULE_OWNER(dev);
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+ dev->open = nsc_ircc_net_open;
+ dev->stop = nsc_ircc_net_close;
+ dev->do_ioctl = nsc_ircc_net_ioctl;
+ dev->get_stats = nsc_ircc_net_get_stats;
+
+ err = register_netdev(dev);
+ if (err) {
+ IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+ goto out4;
+ }
+ IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ /* Check if user has supplied a valid dongle id or not */
+ if ((dongle_id <= 0) ||
+ (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) {
+ dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
+
+ IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
+ dongle_types[dongle_id]);
+ } else {
+ IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
+ dongle_types[dongle_id]);
+ }
+
+ self->io.dongle_id = dongle_id;
+ nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
+
+ pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc);
+ if (pmdev)
+ pmdev->data = self;
+
+ return 0;
+ out4:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ out3:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ out2:
+ release_region(self->io.fir_base, self->io.fir_ext);
+ out1:
+ free_netdev(dev);
+ dev_self[i] = NULL;
+ return err;
+}
+
+/*
+ * Function nsc_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
+ __FUNCTION__, self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+
+ dev_self[self->index] = NULL;
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
+ *
+ * Initialize the NSC '108 chip
+ *
+ */
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ __u8 temp=0;
+
+ outb(2, cfg_base); /* Mode Control Register (MCTL) */
+ outb(0x00, cfg_base+1); /* Disable device */
+
+ /* Base Address and Interrupt Control Register (BAIC) */
+ outb(CFG_108_BAIC, cfg_base);
+ switch (info->fir_base) {
+ case 0x3e8: outb(0x14, cfg_base+1); break;
+ case 0x2e8: outb(0x15, cfg_base+1); break;
+ case 0x3f8: outb(0x16, cfg_base+1); break;
+ case 0x2f8: outb(0x17, cfg_base+1); break;
+ default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+ }
+
+ /* Control Signal Routing Register (CSRT) */
+ switch (info->irq) {
+ case 3: temp = 0x01; break;
+ case 4: temp = 0x02; break;
+ case 5: temp = 0x03; break;
+ case 7: temp = 0x04; break;
+ case 9: temp = 0x05; break;
+ case 11: temp = 0x06; break;
+ case 15: temp = 0x07; break;
+ default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+ }
+ outb(CFG_108_CSRT, cfg_base);
+
+ switch (info->dma) {
+ case 0: outb(0x08+temp, cfg_base+1); break;
+ case 1: outb(0x10+temp, cfg_base+1); break;
+ case 3: outb(0x18+temp, cfg_base+1); break;
+ default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+ }
+
+ outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */
+ outb(0x03, cfg_base+1); /* Enable device */
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_108 (chip, info)
+ *
+ *
+ *
+ */
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg;
+
+ /* Read address and interrupt control register (BAIC) */
+ outb(CFG_108_BAIC, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch (reg & 0x03) {
+ case 0:
+ info->fir_base = 0x3e8;
+ break;
+ case 1:
+ info->fir_base = 0x2e8;
+ break;
+ case 2:
+ info->fir_base = 0x3f8;
+ break;
+ case 3:
+ info->fir_base = 0x2f8;
+ break;
+ }
+ info->sir_base = info->fir_base;
+ IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+ info->fir_base);
+
+ /* Read control signals routing register (CSRT) */
+ outb(CFG_108_CSRT, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch (reg & 0x07) {
+ case 0:
+ info->irq = -1;
+ break;
+ case 1:
+ info->irq = 3;
+ break;
+ case 2:
+ info->irq = 4;
+ break;
+ case 3:
+ info->irq = 5;
+ break;
+ case 4:
+ info->irq = 7;
+ break;
+ case 5:
+ info->irq = 9;
+ break;
+ case 6:
+ info->irq = 11;
+ break;
+ case 7:
+ info->irq = 15;
+ break;
+ }
+ IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+
+ /* Currently we only read Rx DMA but it will also be used for Tx */
+ switch ((reg >> 3) & 0x03) {
+ case 0:
+ info->dma = -1;
+ break;
+ case 1:
+ info->dma = 0;
+ break;
+ case 2:
+ info->dma = 1;
+ break;
+ case 3:
+ info->dma = 3;
+ break;
+ }
+ IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+
+ /* Read mode control register (MCTL) */
+ outb(CFG_108_MCTL, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->enabled = reg & 0x01;
+ info->suspended = !((reg >> 1) & 0x01);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_init_338 (chip, info)
+ *
+ * Initialize the NSC '338 chip. Remember that the 87338 needs two
+ * consecutive writes to the data registers while CPU interrupts are
+ * disabled. The 97338 does not require this, but shouldn't be any
+ * harm if we do it anyway.
+ */
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info)
+{
+ /* No init yet */
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_338 (chip, info)
+ *
+ *
+ *
+ */
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg, com = 0;
+ int pnp;
+
+ /* Read funtion enable register (FER) */
+ outb(CFG_338_FER, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->enabled = (reg >> 2) & 0x01;
+
+ /* Check if we are in Legacy or PnP mode */
+ outb(CFG_338_PNP0, cfg_base);
+ reg = inb(cfg_base+1);
+
+ pnp = (reg >> 3) & 0x01;
+ if (pnp) {
+ IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+ outb(0x46, cfg_base);
+ reg = (inb(cfg_base+1) & 0xfe) << 2;
+
+ outb(0x47, cfg_base);
+ reg |= ((inb(cfg_base+1) & 0xfc) << 8);
+
+ info->fir_base = reg;
+ } else {
+ /* Read function address register (FAR) */
+ outb(CFG_338_FAR, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch ((reg >> 4) & 0x03) {
+ case 0:
+ info->fir_base = 0x3f8;
+ break;
+ case 1:
+ info->fir_base = 0x2f8;
+ break;
+ case 2:
+ com = 3;
+ break;
+ case 3:
+ com = 4;
+ break;
+ }
+
+ if (com) {
+ switch ((reg >> 6) & 0x03) {
+ case 0:
+ if (com == 3)
+ info->fir_base = 0x3e8;
+ else
+ info->fir_base = 0x2e8;
+ break;
+ case 1:
+ if (com == 3)
+ info->fir_base = 0x338;
+ else
+ info->fir_base = 0x238;
+ break;
+ case 2:
+ if (com == 3)
+ info->fir_base = 0x2e8;
+ else
+ info->fir_base = 0x2e0;
+ break;
+ case 3:
+ if (com == 3)
+ info->fir_base = 0x220;
+ else
+ info->fir_base = 0x228;
+ break;
+ }
+ }
+ }
+ info->sir_base = info->fir_base;
+
+ /* Read PnP register 1 (PNP1) */
+ outb(CFG_338_PNP1, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->irq = reg >> 4;
+
+ /* Read PnP register 3 (PNP3) */
+ outb(CFG_338_PNP3, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->dma = (reg & 0x07) - 1;
+
+ /* Read power and test register (PTR) */
+ outb(CFG_338_PTR, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->suspended = reg & 0x01;
+
+ return 0;
+}
+
+
+/*
+ * Function nsc_ircc_init_39x (chip, info)
+ *
+ * Now that we know it's a '39x (see probe below), we need to
+ * configure it so we can use it.
+ *
+ * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
+ * the configuration of the different functionality (serial, parallel,
+ * floppy...) are each in a different bank (Logical Device Number).
+ * The base address, irq and dma configuration registers are common
+ * to all functionalities (index 0x30 to 0x7F).
+ * There is only one configuration register specific to the
+ * serial port, CFG_39X_SPC.
+ * JeanII
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int enabled;
+
+ /* User is shure about his config... accept it. */
+ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
+ "io=0x%04x, irq=%d, dma=%d\n",
+ __FUNCTION__, info->fir_base, info->irq, info->dma);
+
+ /* Access bank for SP2 */
+ outb(CFG_39X_LDN, cfg_base);
+ outb(0x02, cfg_base+1);
+
+ /* Configure SP2 */
+
+ /* We want to enable the device if not enabled */
+ outb(CFG_39X_ACT, cfg_base);
+ enabled = inb(cfg_base+1) & 0x01;
+
+ if (!enabled) {
+ /* Enable the device */
+ outb(CFG_39X_SIOCF1, cfg_base);
+ outb(0x01, cfg_base+1);
+ /* May want to update info->enabled. Jean II */
+ }
+
+ /* Enable UART bank switching (bit 7) ; Sets the chip to normal
+ * power mode (wake up from sleep mode) (bit 1) */
+ outb(CFG_39X_SPC, cfg_base);
+ outb(0x82, cfg_base+1);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_39x (chip, info)
+ *
+ * Test if we really have a '39x chip at the given address
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg1, reg2, irq, irqt, dma1, dma2;
+ int enabled, susp;
+
+ IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
+ __FUNCTION__, cfg_base);
+
+ /* This function should be executed with irq off to avoid
+ * another driver messing with the Super I/O bank - Jean II */
+
+ /* Access bank for SP2 */
+ outb(CFG_39X_LDN, cfg_base);
+ outb(0x02, cfg_base+1);
+
+ /* Read infos about SP2 ; store in info struct */
+ outb(CFG_39X_BASEH, cfg_base);
+ reg1 = inb(cfg_base+1);
+ outb(CFG_39X_BASEL, cfg_base);
+ reg2 = inb(cfg_base+1);
+ info->fir_base = (reg1 << 8) | reg2;
+
+ outb(CFG_39X_IRQNUM, cfg_base);
+ irq = inb(cfg_base+1);
+ outb(CFG_39X_IRQSEL, cfg_base);
+ irqt = inb(cfg_base+1);
+ info->irq = irq;
+
+ outb(CFG_39X_DMA0, cfg_base);
+ dma1 = inb(cfg_base+1);
+ outb(CFG_39X_DMA1, cfg_base);
+ dma2 = inb(cfg_base+1);
+ info->dma = dma1 -1;
+
+ outb(CFG_39X_ACT, cfg_base);
+ info->enabled = enabled = inb(cfg_base+1) & 0x01;
+
+ outb(CFG_39X_SPC, cfg_base);
+ susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
+
+ IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+
+ /* Configure SP2 */
+
+ /* We want to enable the device if not enabled */
+ outb(CFG_39X_ACT, cfg_base);
+ enabled = inb(cfg_base+1) & 0x01;
+
+ if (!enabled) {
+ /* Enable the device */
+ outb(CFG_39X_SIOCF1, cfg_base);
+ outb(0x01, cfg_base+1);
+ /* May want to update info->enabled. Jean II */
+ }
+
+ /* Enable UART bank switching (bit 7) ; Sets the chip to normal
+ * power mode (wake up from sleep mode) (bit 1) */
+ outb(CFG_39X_SPC, cfg_base);
+ outb(0x82, cfg_base+1);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_setup (info)
+ *
+ * Returns non-negative on success.
+ *
+ */
+static int nsc_ircc_setup(chipio_t *info)
+{
+ int version;
+ int iobase = info->fir_base;
+
+ /* Read the Module ID */
+ switch_bank(iobase, BANK3);
+ version = inb(iobase+MID);
+
+ IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
+ __FUNCTION__, driver_name, version);
+
+ /* Should be 0x2? */
+ if (0x20 != (version & 0xf0)) {
+ IRDA_ERROR("%s, Wrong chip version %02x\n",
+ driver_name, version);
+ return -1;
+ }
+
+ /* Switch to advanced mode */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_EXT_SL, iobase+ECR1);
+ switch_bank(iobase, BANK0);
+
+ /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
+ switch_bank(iobase, BANK0);
+ outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+ outb(0x03, iobase+LCR); /* 8 bit word length */
+ outb(MCR_SIR, iobase+MCR); /* Start at SIR-mode, also clears LSR*/
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, BANK2);
+ outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+
+ /* IRCR2: FEND_MD is not set */
+ switch_bank(iobase, BANK5);
+ outb(0x02, iobase+4);
+
+ /* Make sure that some defaults are OK */
+ switch_bank(iobase, BANK6);
+ outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
+ outb(0x0a, iobase+1); /* Set MIR pulse width */
+ outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
+ outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
+
+ /* Enable receive interrupts */
+ switch_bank(iobase, BANK0);
+ outb(IER_RXHDL_IE, iobase+IER);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_read_dongle_id (void)
+ *
+ * Try to read dongle indentification. This procedure needs to be executed
+ * once after power-on/reset. It also needs to be used whenever you suspect
+ * that the user may have plugged/unplugged the IrDA Dongle.
+ */
+static int nsc_ircc_read_dongle_id (int iobase)
+{
+ int dongle_id;
+ __u8 bank;
+
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
+ outb(0x00, iobase+7);
+
+ /* ID0, 1, and 2 are pulled up/down very slowly */
+ udelay(50);
+
+ /* IRCFG1: read the ID bits */
+ dongle_id = inb(iobase+4) & 0x0f;
+
+#ifdef BROKEN_DONGLE_ID
+ if (dongle_id == 0x0a)
+ dongle_id = 0x09;
+#endif
+ /* Go back to bank 0 before returning */
+ switch_bank(iobase, BANK0);
+
+ outb(bank, iobase+BSR);
+
+ return dongle_id;
+}
+
+/*
+ * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
+ *
+ * This function initializes the dongle for the transceiver that is
+ * used. This procedure needs to be executed once after
+ * power-on/reset. It also needs to be used whenever you suspect that
+ * the dongle is changed.
+ */
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
+{
+ int bank;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG4: set according to dongle_id */
+ switch (dongle_id) {
+ case 0x00: /* same as */
+ case 0x01: /* Differential serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x02: /* same as */
+ case 0x03: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x04: /* Sharp RY5HD01 */
+ break;
+ case 0x05: /* Reserved, but this is what the Thinkpad reports */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x06: /* Single-ended serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x07: /* Consumer-IR only */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+ outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+ break;
+ case 0x0A: /* same as */
+ case 0x0B: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x0C: /* same as */
+ case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+ /*
+ * Set irsl0 as input, irsl[1-2] as output, and separate
+ * inputs are used for SIR and MIR/FIR
+ */
+ outb(0x48, iobase+7);
+ break;
+ case 0x0E: /* Supports SIR Mode only */
+ outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+ break;
+ case 0x0F: /* No dongle connected */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+
+ switch_bank(iobase, BANK0);
+ outb(0x62, iobase+MCR);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
+ __FUNCTION__, dongle_id);
+ }
+
+ /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
+ outb(0x00, iobase+4);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+} /* set_up_dongle_interface */
+
+/*
+ * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
+ *
+ * Change speed of the attach dongle
+ *
+ */
+static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
+{
+ __u8 bank;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG1: set according to dongle_id */
+ switch (dongle_id) {
+ case 0x00: /* same as */
+ case 0x01: /* Differential serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x02: /* same as */
+ case 0x03: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x04: /* Sharp RY5HD01 */
+ break;
+ case 0x05: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x06: /* Single-ended serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x07: /* Consumer-IR only */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ outb(0x00, iobase+4);
+ if (speed > 115200)
+ outb(0x01, iobase+4);
+ break;
+ case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+ outb(0x01, iobase+4);
+
+ if (speed == 4000000) {
+ /* There was a cli() there, but we now are already
+ * under spin_lock_irqsave() - JeanII */
+ outb(0x81, iobase+4);
+ outb(0x80, iobase+4);
+ } else
+ outb(0x00, iobase+4);
+ break;
+ case 0x0A: /* same as */
+ case 0x0B: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x0C: /* same as */
+ case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+ break;
+ case 0x0E: /* Supports SIR Mode only */
+ break;
+ case 0x0F: /* No dongle connected */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+
+ switch_bank(iobase, BANK0);
+ outb(0x62, iobase+MCR);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+ }
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_change_speed (self, baud)
+ *
+ * Change the speed of the device
+ *
+ * This function *must* be called with irq off and spin-lock.
+ */
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
+{
+ struct net_device *dev = self->netdev;
+ __u8 mcr = MCR_SIR;
+ int iobase;
+ __u8 bank;
+ __u8 ier; /* Interrupt enable register */
+
+ IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, BANK0);
+ outb(0, iobase+IER);
+
+ /* Select Bank 2 */
+ switch_bank(iobase, BANK2);
+
+ outb(0x00, iobase+BGDH);
+ switch (speed) {
+ case 9600: outb(0x0c, iobase+BGDL); break;
+ case 19200: outb(0x06, iobase+BGDL); break;
+ case 38400: outb(0x03, iobase+BGDL); break;
+ case 57600: outb(0x02, iobase+BGDL); break;
+ case 115200: outb(0x01, iobase+BGDL); break;
+ case 576000:
+ switch_bank(iobase, BANK5);
+
+ /* IRCR2: MDRS is set */
+ outb(inb(iobase+4) | 0x04, iobase+4);
+
+ mcr = MCR_MIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+ break;
+ case 1152000:
+ mcr = MCR_MIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+ break;
+ case 4000000:
+ mcr = MCR_FIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+ break;
+ default:
+ mcr = MCR_FIR;
+ IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
+ __FUNCTION__, speed);
+ break;
+ }
+
+ /* Set appropriate speed mode */
+ switch_bank(iobase, BANK0);
+ outb(mcr | MCR_TX_DFR, iobase+MCR);
+
+ /* Give some hits to the transceiver */
+ nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
+
+ /* Set FIFO threshold to TX17, RX16 */
+ switch_bank(iobase, BANK0);
+ outb(0x00, iobase+FCR);
+ outb(FCR_FIFO_EN, iobase+FCR);
+ outb(FCR_RXTH| /* Set Rx FIFO threshold */
+ FCR_TXTH| /* Set Tx FIFO threshold */
+ FCR_TXSR| /* Reset Tx FIFO */
+ FCR_RXSR| /* Reset Rx FIFO */
+ FCR_FIFO_EN, /* Enable FIFOs */
+ iobase+FCR);
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, BANK2);
+ outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+
+ /* Enable some interrupts so we can receive frames */
+ switch_bank(iobase, BANK0);
+ if (speed > 115200) {
+ /* Install FIR xmit handler */
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
+ ier = IER_SFIF_IE;
+ nsc_ircc_dma_receive(self);
+ } else {
+ /* Install SIR xmit handler */
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+ ier = IER_RXHDL_IE;
+ }
+ /* Set our current interrupt mask */
+ outb(ier, iobase+IER);
+
+ /* Restore BSR */
+ outb(bank, iobase+BSR);
+
+ /* Make sure interrupt handlers keep the proper interrupt mask */
+ return(ier);
+}
+
+/*
+ * Function nsc_ircc_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __s32 speed;
+ __u8 bank;
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame. */
+ if (!skb->len) {
+ /* If we just sent a frame, we get called before
+ * the last bytes get out (because of the SIR FIFO).
+ * If this is the case, let interrupt handler change
+ * the speed itself... Jean II */
+ if (self->io.direction == IO_RECV) {
+ nsc_ircc_change_speed(self, speed);
+ /* TODO : For SIR->SIR, the next packet
+ * may get corrupted - Jean II */
+ netif_wake_queue(dev);
+ } else {
+ self->new_speed = speed;
+ /* Queue will be restarted after speed change
+ * to make sure packets gets through the
+ * proper xmit handler - Jean II */
+ }
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ self->tx_buff.data = self->tx_buff.head;
+
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* Add interrupt on tx low level (will fire immediately) */
+ switch_bank(iobase, BANK0);
+ outb(IER_TXLDL_IE, iobase+IER);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __s32 speed;
+ __u8 bank;
+ int mtt, diff;
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame. */
+ if (!skb->len) {
+ /* If we are currently transmitting, defer to
+ * interrupt handler. - Jean II */
+ if(self->tx_fifo.len == 0) {
+ nsc_ircc_change_speed(self, speed);
+ netif_wake_queue(dev);
+ } else {
+ self->new_speed = speed;
+ /* Keep queue stopped :
+ * the speed change operation may change the
+ * xmit handler, and we want to make sure
+ * the next packet get through the proper
+ * Tx path, so block the Tx queue until
+ * the speed change has been done.
+ * Jean II */
+ }
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else {
+ /* Change speed after current frame */
+ self->new_speed = speed;
+ }
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Register and copy this frame to DMA memory */
+ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+ self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+ self->tx_fifo.tail += skb->len;
+
+ self->stats.tx_bytes += skb->len;
+
+ memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
+ skb->len);
+
+ self->tx_fifo.len++;
+ self->tx_fifo.free++;
+
+ /* Start transmit only if there is currently no transmit going on */
+ if (self->tx_fifo.len == 1) {
+ /* Check if we must wait the min turn time or not */
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ /* Check how much time we have used already */
+ do_gettimeofday(&self->now);
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff) {
+ mtt -= diff;
+
+ /*
+ * Use timer if delay larger than 125 us, and
+ * use udelay for smaller values which should
+ * be acceptable
+ */
+ if (mtt > 125) {
+ /* Adjust for timer resolution */
+ mtt = mtt / 125;
+
+ /* Setup timer */
+ switch_bank(iobase, BANK4);
+ outb(mtt & 0xff, iobase+TMRL);
+ outb((mtt >> 8) & 0x0f, iobase+TMRH);
+
+ /* Start timer */
+ outb(IRCR1_TMR_EN, iobase+IRCR1);
+ self->io.direction = IO_XMIT;
+
+ /* Enable timer interrupt */
+ switch_bank(iobase, BANK0);
+ outb(IER_TMR_IE, iobase+IER);
+
+ /* Timer will take care of the rest */
+ goto out;
+ } else
+ udelay(mtt);
+ }
+ }
+ /* Enable DMA interrupt */
+ switch_bank(iobase, BANK0);
+ outb(IER_DMA_IE, iobase+IER);
+
+ /* Transmit frame */
+ nsc_ircc_dma_xmit(self, iobase);
+ }
+ out:
+ /* Not busy transmitting anymore if window is not full,
+ * and if we don't need to change speed */
+ if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
+ netif_wake_queue(self->netdev);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit (self, iobase)
+ *
+ * Transmit data using DMA
+ *
+ */
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
+{
+ int bsr;
+
+ /* Save current bank */
+ bsr = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ self->io.direction = IO_XMIT;
+
+ /* Choose transmit DMA channel */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+
+ irda_setup_dma(self->io.dma,
+ ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
+ self->tx_buff.head) + self->tx_buff_dma,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ DMA_TX_MODE);
+
+ /* Enable DMA and SIR interaction pulse */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
+
+ /* Restore bank register */
+ outb(bsr, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_pio_xmit (self, iobase)
+ *
+ * Transmit data using PIO. Returns the number of bytes that actually
+ * got transferred
+ *
+ */
+static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
+{
+ int actual = 0;
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ switch_bank(iobase, BANK0);
+ if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
+ IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
+ __FUNCTION__);
+
+ /* FIFO may still be filled to the Tx interrupt threshold */
+ fifo_size -= 17;
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual++], iobase+TXD);
+ }
+
+ IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
+ __FUNCTION__, fifo_size, actual, len);
+
+ /* Restore bank */
+ outb(bank, iobase+BSR);
+
+ return actual;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit_complete (self)
+ *
+ * The transfer of a frame in finished. This function will only be called
+ * by the interrupt handler
+ *
+ */
+static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
+{
+ int iobase;
+ __u8 bank;
+ int ret = TRUE;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ iobase = self->io.fir_base;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ /* Check for underrrun! */
+ if (inb(iobase+ASCR) & ASCR_TXUR) {
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+
+ /* Clear bit, by writing 1 into it */
+ outb(ASCR_TXUR, iobase+ASCR);
+ } else {
+ self->stats.tx_packets++;
+ }
+
+ /* Finished with this frame, so prepare for next */
+ self->tx_fifo.ptr++;
+ self->tx_fifo.len--;
+
+ /* Any frames to be sent back-to-back? */
+ if (self->tx_fifo.len) {
+ nsc_ircc_dma_xmit(self, iobase);
+
+ /* Not finished yet! */
+ ret = FALSE;
+ } else {
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+ }
+
+ /* Make sure we have room for more frames and
+ * that we don't need to change speed */
+ if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
+ /* Not busy transmitting anymore */
+ /* Tell the network layer, that we can accept more frames */
+ netif_wake_queue(self->netdev);
+ }
+
+ /* Restore bank */
+ outb(bank, iobase+BSR);
+
+ return ret;
+}
+
+/*
+ * Function nsc_ircc_dma_receive (self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self)
+{
+ int iobase;
+ __u8 bsr;
+
+ iobase = self->io.fir_base;
+
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Save current bank */
+ bsr = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ /* Choose DMA Rx, DMA Fairness, and Advanced mode */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Rx FIFO. This will also flush the ST_FIFO */
+ switch_bank(iobase, BANK0);
+ outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+ self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+ self->st_fifo.tail = self->st_fifo.head = 0;
+
+ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+ DMA_RX_MODE);
+
+ /* Enable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
+
+ /* Restore bank register */
+ outb(bsr, iobase+BSR);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_receive_complete (self)
+ *
+ * Finished with receiving frames
+ *
+ *
+ */
+static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ __u8 status;
+ __u8 bank;
+ int len;
+
+ st_fifo = &self->st_fifo;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Read all entries in status FIFO */
+ switch_bank(iobase, BANK5);
+ while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
+ /* We must empty the status FIFO no matter what */
+ len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
+
+ if (st_fifo->tail >= MAX_RX_WINDOW) {
+ IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+ continue;
+ }
+
+ st_fifo->entries[st_fifo->tail].status = status;
+ st_fifo->entries[st_fifo->tail].len = len;
+ st_fifo->pending_bytes += len;
+ st_fifo->tail++;
+ st_fifo->len++;
+ }
+ /* Try to process all entries in status FIFO */
+ while (st_fifo->len > 0) {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->pending_bytes -= len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ /* Check for errors */
+ if (status & FRM_ST_ERR_MSK) {
+ if (status & FRM_ST_LOST_FR) {
+ /* Add number of lost frames to stats */
+ self->stats.rx_errors += len;
+ } else {
+ /* Skip frame */
+ self->stats.rx_errors++;
+
+ self->rx_buff.data += len;
+
+ if (status & FRM_ST_MAX_LEN)
+ self->stats.rx_length_errors++;
+
+ if (status & FRM_ST_PHY_ERR)
+ self->stats.rx_frame_errors++;
+
+ if (status & FRM_ST_BAD_CRC)
+ self->stats.rx_crc_errors++;
+ }
+ /* The errors below can be reported in both cases */
+ if (status & FRM_ST_OVR1)
+ self->stats.rx_fifo_errors++;
+
+ if (status & FRM_ST_OVR2)
+ self->stats.rx_fifo_errors++;
+ } else {
+ /*
+ * First we must make sure that the frame we
+ * want to deliver is all in main memory. If we
+ * cannot tell, then we check if the Rx FIFO is
+ * empty. If not then we will have to take a nap
+ * and try again later.
+ */
+ if (st_fifo->pending_bytes < self->io.fifo_size) {
+ switch_bank(iobase, BANK0);
+ if (inb(iobase+LSR) & LSR_RXDA) {
+ /* Put this entry back in fifo */
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->pending_bytes += len;
+ st_fifo->entries[st_fifo->head].status = status;
+ st_fifo->entries[st_fifo->head].len = len;
+ /*
+ * DMA not finished yet, so try again
+ * later, set timer value, resolution
+ * 125 us
+ */
+ switch_bank(iobase, BANK4);
+ outb(0x02, iobase+TMRL); /* x 125 us */
+ outb(0x00, iobase+TMRH);
+
+ /* Start timer */
+ outb(IRCR1_TMR_EN, iobase+IRCR1);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return FALSE; /* I'll be back! */
+ }
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ do_gettimeofday(&self->stamp);
+
+ skb = dev_alloc_skb(len+1);
+ if (skb == NULL) {
+ IRDA_WARNING("%s(), memory squeeze, "
+ "dropping frame.\n",
+ __FUNCTION__);
+ self->stats.rx_dropped++;
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return FALSE;
+ }
+
+ /* Make sure IP header gets aligned */
+ skb_reserve(skb, 1);
+
+ /* Copy frame without CRC */
+ if (self->io.speed < 4000000) {
+ skb_put(skb, len-2);
+ memcpy(skb->data, self->rx_buff.data, len-2);
+ } else {
+ skb_put(skb, len-4);
+ memcpy(skb->data, self->rx_buff.data, len-4);
+ }
+
+ /* Move to next frame */
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ self->netdev->last_rx = jiffies;
+ }
+ }
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return TRUE;
+}
+
+/*
+ * Function nsc_ircc_pio_receive (self)
+ *
+ * Receive all data in receiver FIFO
+ *
+ */
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self)
+{
+ __u8 byte;
+ int iobase;
+
+ iobase = self->io.fir_base;
+
+ /* Receive all characters in Rx FIFO */
+ do {
+ byte = inb(iobase+RXD);
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ byte);
+ } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */
+}
+
+/*
+ * Function nsc_ircc_sir_interrupt (self, eir)
+ *
+ * Handle SIR interrupt
+ *
+ */
+static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
+{
+ int actual;
+
+ /* Check if transmit FIFO is low on data */
+ if (eir & EIR_TXLDL_EV) {
+ /* Write data left in transmit buffer */
+ actual = nsc_ircc_pio_write(self->io.fir_base,
+ self->tx_buff.data,
+ self->tx_buff.len,
+ self->io.fifo_size);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+
+ self->io.direction = IO_XMIT;
+
+ /* Check if finished */
+ if (self->tx_buff.len > 0)
+ self->ier = IER_TXLDL_IE;
+ else {
+
+ self->stats.tx_packets++;
+ netif_wake_queue(self->netdev);
+ self->ier = IER_TXEMP_IE;
+ }
+
+ }
+ /* Check if transmission has completed */
+ if (eir & EIR_TXEMP_EV) {
+ /* Turn around and get ready to receive some data */
+ self->io.direction = IO_RECV;
+ self->ier = IER_RXHDL_IE;
+ /* Check if we need to change the speed?
+ * Need to be after self->io.direction to avoid race with
+ * nsc_ircc_hard_xmit_sir() - Jean II */
+ if (self->new_speed) {
+ IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+ self->ier = nsc_ircc_change_speed(self,
+ self->new_speed);
+ self->new_speed = 0;
+ netif_wake_queue(self->netdev);
+
+ /* Check if we are going to FIR */
+ if (self->io.speed > 115200) {
+ /* No need to do anymore SIR stuff */
+ return;
+ }
+ }
+ }
+
+ /* Rx FIFO threshold or timeout */
+ if (eir & EIR_RXHDL_EV) {
+ nsc_ircc_pio_receive(self);
+
+ /* Keep receiving */
+ self->ier = IER_RXHDL_IE;
+ }
+}
+
+/*
+ * Function nsc_ircc_fir_interrupt (self, eir)
+ *
+ * Handle MIR/FIR interrupt
+ *
+ */
+static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
+ int eir)
+{
+ __u8 bank;
+
+ bank = inb(iobase+BSR);
+
+ /* Status FIFO event*/
+ if (eir & EIR_SFIF_EV) {
+ /* Check if DMA has finished */
+ if (nsc_ircc_dma_receive_complete(self, iobase)) {
+ /* Wait for next status FIFO interrupt */
+ self->ier = IER_SFIF_IE;
+ } else {
+ self->ier = IER_SFIF_IE | IER_TMR_IE;
+ }
+ } else if (eir & EIR_TMR_EV) { /* Timer finished */
+ /* Disable timer */
+ switch_bank(iobase, BANK4);
+ outb(0, iobase+IRCR1);
+
+ /* Clear timer event */
+ switch_bank(iobase, BANK0);
+ outb(ASCR_CTE, iobase+ASCR);
+
+ /* Check if this is a Tx timer interrupt */
+ if (self->io.direction == IO_XMIT) {
+ nsc_ircc_dma_xmit(self, iobase);
+
+ /* Interrupt on DMA */
+ self->ier = IER_DMA_IE;
+ } else {
+ /* Check (again) if DMA has finished */
+ if (nsc_ircc_dma_receive_complete(self, iobase)) {
+ self->ier = IER_SFIF_IE;
+ } else {
+ self->ier = IER_SFIF_IE | IER_TMR_IE;
+ }
+ }
+ } else if (eir & EIR_DMA_EV) {
+ /* Finished with all transmissions? */
+ if (nsc_ircc_dma_xmit_complete(self)) {
+ if(self->new_speed != 0) {
+ /* As we stop the Tx queue, the speed change
+ * need to be done when the Tx fifo is
+ * empty. Ask for a Tx done interrupt */
+ self->ier = IER_TXEMP_IE;
+ } else {
+ /* Check if there are more frames to be
+ * transmitted */
+ if (irda_device_txqueue_empty(self->netdev)) {
+ /* Prepare for receive */
+ nsc_ircc_dma_receive(self);
+ self->ier = IER_SFIF_IE;
+ } else
+ IRDA_WARNING("%s(), potential "
+ "Tx queue lockup !\n",
+ __FUNCTION__);
+ }
+ } else {
+ /* Not finished yet, so interrupt on DMA again */
+ self->ier = IER_DMA_IE;
+ }
+ } else if (eir & EIR_TXEMP_EV) {
+ /* The Tx FIFO has totally drained out, so now we can change
+ * the speed... - Jean II */
+ self->ier = nsc_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ netif_wake_queue(self->netdev);
+ /* Note : nsc_ircc_change_speed() restarted Rx fifo */
+ }
+
+ outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct nsc_ircc_cb *self;
+ __u8 bsr, eir;
+ int iobase;
+
+ if (!dev) {
+ IRDA_WARNING("%s: irq %d for unknown device.\n",
+ driver_name, irq);
+ return IRQ_NONE;
+ }
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ spin_lock(&self->lock);
+
+ iobase = self->io.fir_base;
+
+ bsr = inb(iobase+BSR); /* Save current bank */
+
+ switch_bank(iobase, BANK0);
+ self->ier = inb(iobase+IER);
+ eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */
+
+ outb(0, iobase+IER); /* Disable interrupts */
+
+ if (eir) {
+ /* Dispatch interrupt handler for the current speed */
+ if (self->io.speed > 115200)
+ nsc_ircc_fir_interrupt(self, iobase, eir);
+ else
+ nsc_ircc_sir_interrupt(self, eir);
+ }
+
+ outb(self->ier, iobase+IER); /* Restore interrupts */
+ outb(bsr, iobase+BSR); /* Restore bank register */
+
+ spin_unlock(&self->lock);
+ return IRQ_RETVAL(eir);
+}
+
+/*
+ * Function nsc_ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
+{
+ unsigned long flags;
+ int status = FALSE;
+ int iobase;
+ __u8 bank;
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ if (self->io.speed > 115200) {
+ iobase = self->io.fir_base;
+
+ /* Check if rx FIFO is not empty */
+ bank = inb(iobase+BSR);
+ switch_bank(iobase, BANK2);
+ if ((inb(iobase+RXFLV) & 0x3f) != 0) {
+ /* We are receiving something */
+ status = TRUE;
+ }
+ outb(bank, iobase+BSR);
+ } else
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return status;
+}
+
+/*
+ * Function nsc_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int nsc_ircc_net_open(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ int iobase;
+ char hwname[32];
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
+ IRDA_WARNING("%s, unable to allocate irq=%d\n",
+ driver_name, self->io.irq);
+ return -EAGAIN;
+ }
+ /*
+ * Always allocate the DMA channel after the IRQ, and clean up on
+ * failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ IRDA_WARNING("%s, unable to allocate dma=%d\n",
+ driver_name, self->io.dma);
+ free_irq(self->io.irq, dev);
+ return -EAGAIN;
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* turn on interrupts */
+ switch_bank(iobase, BANK0);
+ outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /* Give self a hardware name */
+ sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int nsc_ircc_net_close(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ int iobase;
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ iobase = self->io.fir_base;
+
+ disable_dma(self->io.dma);
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, BANK0);
+ outb(0, iobase+IER);
+
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ spin_lock_irqsave(&self->lock, flags);
+ nsc_ircc_change_speed(self, irq->ifr_baudrate);
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ /* This is already protected */
+ irq->ifr_receiving = nsc_ircc_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv;
+
+ return &self->stats;
+}
+
+static void nsc_ircc_suspend(struct nsc_ircc_cb *self)
+{
+ IRDA_MESSAGE("%s, Suspending\n", driver_name);
+
+ if (self->io.suspended)
+ return;
+
+ nsc_ircc_net_close(self->netdev);
+
+ self->io.suspended = 1;
+}
+
+static void nsc_ircc_wakeup(struct nsc_ircc_cb *self)
+{
+ if (!self->io.suspended)
+ return;
+
+ nsc_ircc_setup(&self->io);
+ nsc_ircc_net_open(self->netdev);
+
+ IRDA_MESSAGE("%s, Waking up\n", driver_name);
+
+ self->io.suspended = 0;
+}
+
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+ struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data;
+ if (self) {
+ switch (rqst) {
+ case PM_SUSPEND:
+ nsc_ircc_suspend(self);
+ break;
+ case PM_RESUME:
+ nsc_ircc_wakeup(self);
+ break;
+ }
+ }
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("NSC IrDA Device Driver");
+MODULE_LICENSE("GPL");
+
+
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "Base I/O addresses");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ lines");
+module_param_array(dma, int, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channels");
+module_param(dongle_id, int, 0);
+MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
+
+module_init(nsc_ircc_init);
+module_exit(nsc_ircc_cleanup);
+
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
new file mode 100644
index 000000000000..6edf7e514624
--- /dev/null
+++ b/drivers/net/irda/nsc-ircc.h
@@ -0,0 +1,280 @@
+/*********************************************************************
+ *
+ * Filename: nsc-ircc.h
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Fri Nov 13 14:37:40 1998
+ * Modified at: Sun Jan 23 17:47:00 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
+ * Copyright (c) 1998 Actisys Corp., www.actisys.com
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef NSC_IRCC_H
+#define NSC_IRCC_H
+
+#include <linux/time.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+/* Config registers for the '108 */
+#define CFG_108_BAIC 0x00
+#define CFG_108_CSRT 0x01
+#define CFG_108_MCTL 0x02
+
+/* Config registers for the '338 */
+#define CFG_338_FER 0x00
+#define CFG_338_FAR 0x01
+#define CFG_338_PTR 0x02
+#define CFG_338_PNP0 0x1b
+#define CFG_338_PNP1 0x1c
+#define CFG_338_PNP3 0x4f
+
+/* Config registers for the '39x (in the logical device bank) */
+#define CFG_39X_LDN 0x07 /* Logical device number (Super I/O bank) */
+#define CFG_39X_SIOCF1 0x21 /* SuperI/O Config */
+#define CFG_39X_ACT 0x30 /* Device activation */
+#define CFG_39X_BASEH 0x60 /* Device base address (high bits) */
+#define CFG_39X_BASEL 0x61 /* Device base address (low bits) */
+#define CFG_39X_IRQNUM 0x70 /* Interrupt number & wake up enable */
+#define CFG_39X_IRQSEL 0x71 /* Interrupt select (edge/level + polarity) */
+#define CFG_39X_DMA0 0x74 /* DMA 0 configuration */
+#define CFG_39X_DMA1 0x75 /* DMA 1 configuration */
+#define CFG_39X_SPC 0xF0 /* Serial port configuration register */
+
+/* Flags for configuration register CRF0 */
+#define APEDCRC 0x02
+#define ENBNKSEL 0x01
+
+/* Set 0 */
+#define TXD 0x00 /* Transmit data port */
+#define RXD 0x00 /* Receive data port */
+
+/* Register 1 */
+#define IER 0x01 /* Interrupt Enable Register*/
+#define IER_RXHDL_IE 0x01 /* Receiver high data level interrupt */
+#define IER_TXLDL_IE 0x02 /* Transeiver low data level interrupt */
+#define IER_LS_IE 0x04//* Link Status Interrupt */
+#define IER_ETXURI 0x04 /* Tx underrun */
+#define IER_DMA_IE 0x10 /* DMA finished interrupt */
+#define IER_TXEMP_IE 0x20
+#define IER_SFIF_IE 0x40 /* Frame status FIFO intr */
+#define IER_TMR_IE 0x80 /* Timer event */
+
+#define FCR 0x02 /* (write only) */
+#define FCR_FIFO_EN 0x01 /* Enable FIFO's */
+#define FCR_RXSR 0x02 /* Rx FIFO soft reset */
+#define FCR_TXSR 0x04 /* Tx FIFO soft reset */
+#define FCR_RXTH 0x40 /* Rx FIFO threshold (set to 16) */
+#define FCR_TXTH 0x20 /* Tx FIFO threshold (set to 17) */
+
+#define EIR 0x02 /* (read only) */
+#define EIR_RXHDL_EV 0x01
+#define EIR_TXLDL_EV 0x02
+#define EIR_LS_EV 0x04
+#define EIR_DMA_EV 0x10
+#define EIR_TXEMP_EV 0x20
+#define EIR_SFIF_EV 0x40
+#define EIR_TMR_EV 0x80
+
+#define LCR 0x03 /* Link control register */
+#define LCR_WLS_8 0x03 /* 8 bits */
+
+#define BSR 0x03 /* Bank select register */
+#define BSR_BKSE 0x80
+#define BANK0 LCR_WLS_8 /* Must make sure that we set 8N1 */
+#define BANK1 0x80
+#define BANK2 0xe0
+#define BANK3 0xe4
+#define BANK4 0xe8
+#define BANK5 0xec
+#define BANK6 0xf0
+#define BANK7 0xf4
+
+#define MCR 0x04 /* Mode Control Register */
+#define MCR_MODE_MASK ~(0xd0)
+#define MCR_UART 0x00
+#define MCR_RESERVED 0x20
+#define MCR_SHARP_IR 0x40
+#define MCR_SIR 0x60
+#define MCR_MIR 0x80
+#define MCR_FIR 0xa0
+#define MCR_CEIR 0xb0
+#define MCR_IR_PLS 0x10
+#define MCR_DMA_EN 0x04
+#define MCR_EN_IRQ 0x08
+#define MCR_TX_DFR 0x08
+
+#define LSR 0x05 /* Link status register */
+#define LSR_RXDA 0x01 /* Receiver data available */
+#define LSR_TXRDY 0x20 /* Transmitter ready */
+#define LSR_TXEMP 0x40 /* Transmitter empty */
+
+#define ASCR 0x07 /* Auxillary Status and Control Register */
+#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */
+#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */
+#define ASCR_S_EOT 0x04 /* Set end of transmission */
+#define ASCT_RXBSY 0x20 /* Rx busy */
+#define ASCR_TXUR 0x40 /* Transeiver underrun */
+#define ASCR_CTE 0x80 /* Clear timer event */
+
+/* Bank 2 */
+#define BGDL 0x00 /* Baud Generator Divisor Port (Low Byte) */
+#define BGDH 0x01 /* Baud Generator Divisor Port (High Byte) */
+
+#define ECR1 0x02 /* Extended Control Register 1 */
+#define ECR1_EXT_SL 0x01 /* Extended Mode Select */
+#define ECR1_DMANF 0x02 /* DMA Fairness */
+#define ECR1_DMATH 0x04 /* DMA Threshold */
+#define ECR1_DMASWP 0x08 /* DMA Swap */
+
+#define EXCR2 0x04
+#define EXCR2_TFSIZ 0x01 /* Rx FIFO size = 32 */
+#define EXCR2_RFSIZ 0x04 /* Tx FIFO size = 32 */
+
+#define TXFLV 0x06 /* Tx FIFO level */
+#define RXFLV 0x07 /* Rx FIFO level */
+
+/* Bank 3 */
+#define MID 0x00
+
+/* Bank 4 */
+#define TMRL 0x00 /* Timer low byte */
+#define TMRH 0x01 /* Timer high byte */
+#define IRCR1 0x02 /* Infrared control register 1 */
+#define IRCR1_TMR_EN 0x01 /* Timer enable */
+
+#define TFRLL 0x04
+#define TFRLH 0x05
+#define RFRLL 0x06
+#define RFRLH 0x07
+
+/* Bank 5 */
+#define IRCR2 0x04 /* Infrared control register 2 */
+#define IRCR2_MDRS 0x04 /* MIR data rate select */
+#define IRCR2_FEND_MD 0x20 /* */
+
+#define FRM_ST 0x05 /* Frame status FIFO */
+#define FRM_ST_VLD 0x80 /* Frame status FIFO data valid */
+#define FRM_ST_ERR_MSK 0x5f
+#define FRM_ST_LOST_FR 0x40 /* Frame lost */
+#define FRM_ST_MAX_LEN 0x10 /* Max frame len exceeded */
+#define FRM_ST_PHY_ERR 0x08 /* Physical layer error */
+#define FRM_ST_BAD_CRC 0x04
+#define FRM_ST_OVR1 0x02 /* Rx FIFO overrun */
+#define FRM_ST_OVR2 0x01 /* Frame status FIFO overrun */
+
+#define RFLFL 0x06
+#define RFLFH 0x07
+
+/* Bank 6 */
+#define IR_CFG2 0x00
+#define IR_CFG2_DIS_CRC 0x02
+
+/* Bank 7 */
+#define IRM_CR 0x07 /* Infrared module control register */
+#define IRM_CR_IRX_MSL 0x40
+#define IRM_CR_AF_MNT 0x80 /* Automatic format */
+
+/* NSC chip information */
+struct nsc_chip {
+ char *name; /* Name of chipset */
+ int cfg[3]; /* Config registers */
+ u_int8_t cid_index; /* Chip identification index reg */
+ u_int8_t cid_value; /* Chip identification expected value */
+ u_int8_t cid_mask; /* Chip identification revision mask */
+
+ /* Functions for probing and initializing the specific chip */
+ int (*probe)(struct nsc_chip *chip, chipio_t *info);
+ int (*init)(struct nsc_chip *chip, chipio_t *info);
+};
+typedef struct nsc_chip nsc_chip_t;
+
+/* For storing entries in the status FIFO */
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Lenght of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Lenght of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+/* Private data for each instance */
+struct nsc_ircc_cb {
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ __u8 ier; /* Interrupt enable register */
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ struct pm_dev *dev;
+};
+
+static inline void switch_bank(int iobase, int bank)
+{
+ outb(bank, iobase+BSR);
+}
+
+#endif /* NSC_IRCC_H */
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
new file mode 100644
index 000000000000..8c22c7374a23
--- /dev/null
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -0,0 +1,156 @@
+/*********************************************************************
+ *
+ * Filename: old_belkin.c
+ * Version: 1.1
+ * Description: Driver for the Belkin (old) SmartBeam dongle
+ * Status: Experimental...
+ * Author: Jean Tourrilhes <jt@hpl.hp.com>
+ * Created at: 22/11/99
+ * Modified at: Fri Dec 17 09:13:32 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+// #include <net/irda/irda_device.h>
+
+#include "sir-dev.h"
+
+/*
+ * Belkin is selling a dongle called the SmartBeam.
+ * In fact, there is two hardware version of this dongle, of course with
+ * the same name and looking the exactly same (grrr...).
+ * I guess that I've got the old one, because inside I don't have
+ * a jumper for IrDA/ASK...
+ *
+ * As far as I can make it from info on their web site, the old dongle
+ * support only 9600 b/s, which make our life much simpler as far as
+ * the driver is concerned, but you might not like it very much ;-)
+ * The new SmartBeam does 115 kb/s, and I've not tested it...
+ *
+ * Belkin claim that the correct driver for the old dongle (in Windows)
+ * is the generic Parallax 9500a driver, but the Linux LiteLink driver
+ * fails for me (probably because Linux-IrDA doesn't rate fallback),
+ * so I created this really dumb driver...
+ *
+ * In fact, this driver doesn't do much. The only thing it does is to
+ * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
+ * driver is called "old_belkin" so that when the new SmartBeam is supported
+ * its driver can be called "belkin" instead of "new_belkin".
+ *
+ * Note : this driver was written without any info/help from Belkin,
+ * so a lot of info here might be totally wrong. Blame me ;-)
+ */
+
+static int old_belkin_open(struct sir_dev *dev);
+static int old_belkin_close(struct sir_dev *dev);
+static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed);
+static int old_belkin_reset(struct sir_dev *dev);
+
+static struct dongle_driver old_belkin = {
+ .owner = THIS_MODULE,
+ .driver_name = "Old Belkin SmartBeam",
+ .type = IRDA_OLD_BELKIN_DONGLE,
+ .open = old_belkin_open,
+ .close = old_belkin_close,
+ .reset = old_belkin_reset,
+ .set_speed = old_belkin_change_speed,
+};
+
+static int __init old_belkin_sir_init(void)
+{
+ return irda_register_dongle(&old_belkin);
+}
+
+static void __exit old_belkin_sir_cleanup(void)
+{
+ irda_unregister_dongle(&old_belkin);
+}
+
+static int old_belkin_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power on dongle */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Not too fast, please... */
+ qos->baud_rate.bits &= IR_9600;
+ /* Needs at least 10 ms (totally wild guess, can do probably better) */
+ qos->min_turn_time.bits = 0x01;
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int old_belkin_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function old_belkin_change_speed (task)
+ *
+ * With only one speed available, not much to do...
+ */
+static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ dev->speed = 9600;
+ return (speed==dev->speed) ? 0 : -EINVAL;
+}
+
+/*
+ * Function old_belkin_reset (task)
+ *
+ * Reset the Old-Belkin type dongle.
+ *
+ */
+static int old_belkin_reset(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* This dongles speed "defaults" to 9600 bps ;-) */
+ dev->speed = 9600;
+
+ return 0;
+}
+
+MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
+
+module_init(old_belkin_sir_init);
+module_exit(old_belkin_sir_cleanup);
diff --git a/drivers/net/irda/old_belkin.c b/drivers/net/irda/old_belkin.c
new file mode 100644
index 000000000000..26f81fd28371
--- /dev/null
+++ b/drivers/net/irda/old_belkin.c
@@ -0,0 +1,164 @@
+/*********************************************************************
+ *
+ * Filename: old_belkin.c
+ * Version: 1.1
+ * Description: Driver for the Belkin (old) SmartBeam dongle
+ * Status: Experimental...
+ * Author: Jean Tourrilhes <jt@hpl.hp.com>
+ * Created at: 22/11/99
+ * Modified at: Fri Dec 17 09:13:32 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+/*
+ * Belkin is selling a dongle called the SmartBeam.
+ * In fact, there is two hardware version of this dongle, of course with
+ * the same name and looking the exactly same (grrr...).
+ * I guess that I've got the old one, because inside I don't have
+ * a jumper for IrDA/ASK...
+ *
+ * As far as I can make it from info on their web site, the old dongle
+ * support only 9600 b/s, which make our life much simpler as far as
+ * the driver is concerned, but you might not like it very much ;-)
+ * The new SmartBeam does 115 kb/s, and I've not tested it...
+ *
+ * Belkin claim that the correct driver for the old dongle (in Windows)
+ * is the generic Parallax 9500a driver, but the Linux LiteLink driver
+ * fails for me (probably because Linux-IrDA doesn't rate fallback),
+ * so I created this really dumb driver...
+ *
+ * In fact, this driver doesn't do much. The only thing it does is to
+ * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
+ * driver is called "old_belkin" so that when the new SmartBeam is supported
+ * its driver can be called "belkin" instead of "new_belkin".
+ *
+ * Note : this driver was written without any info/help from Belkin,
+ * so a lot of info here might be totally wrong. Blame me ;-)
+ */
+
+/* Let's guess */
+#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
+
+static void old_belkin_open(dongle_t *self, struct qos_info *qos);
+static void old_belkin_close(dongle_t *self);
+static int old_belkin_change_speed(struct irda_task *task);
+static int old_belkin_reset(struct irda_task *task);
+
+/* These are the baudrates supported */
+/* static __u32 baud_rates[] = { 9600 }; */
+
+static struct dongle_reg dongle = {
+ .type = IRDA_OLD_BELKIN_DONGLE,
+ .open = old_belkin_open,
+ .close = old_belkin_close,
+ .reset = old_belkin_reset,
+ .change_speed = old_belkin_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init old_belkin_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit old_belkin_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void old_belkin_open(dongle_t *self, struct qos_info *qos)
+{
+ /* Not too fast, please... */
+ qos->baud_rate.bits &= IR_9600;
+ /* Needs at least 10 ms (totally wild guess, can do probably better) */
+ qos->min_turn_time.bits = 0x01;
+}
+
+static void old_belkin_close(dongle_t *self)
+{
+ /* Power off dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+}
+
+/*
+ * Function old_belkin_change_speed (task)
+ *
+ * With only one speed available, not much to do...
+ */
+static int old_belkin_change_speed(struct irda_task *task)
+{
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+/*
+ * Function old_belkin_reset (task)
+ *
+ * Reset the Old-Belkin type dongle.
+ *
+ */
+static int old_belkin_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+
+ /* Power on dongle */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Sleep a minimum of 15 us */
+ udelay(MIN_DELAY);
+
+ /* This dongles speed "defaults" to 9600 bps ;-) */
+ self->speed = 9600;
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+
+ return 0;
+}
+
+MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Old-Belkin module
+ *
+ */
+module_init(old_belkin_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Old-Belkin module
+ *
+ */
+module_exit(old_belkin_cleanup);
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
new file mode 100644
index 000000000000..89f5096cab74
--- /dev/null
+++ b/drivers/net/irda/sa1100_ir.c
@@ -0,0 +1,1045 @@
+/*
+ * linux/drivers/net/irda/sa1100_ir.c
+ *
+ * Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver for the StrongARM SA1100 embedded microprocessor
+ *
+ * Note that we don't have to worry about the SA1111's DMA bugs in here,
+ * so we use the straight forward dma_map_* functions with a null pointer.
+ *
+ * This driver takes one kernel command line parameter, sa1100ir=, with
+ * the following options:
+ * max_rate:baudrate - set the maximum baud rate
+ * power_leve:level - set the transmitter power level
+ * tx_lpm:0|1 - set transmit low power mode
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/mach/irda.h>
+
+static int power_level = 3;
+static int tx_lpm;
+static int max_rate = 4000000;
+
+struct sa1100_irda {
+ unsigned char hscr0;
+ unsigned char utcr4;
+ unsigned char power;
+ unsigned char open;
+
+ int speed;
+ int newspeed;
+
+ struct sk_buff *txskb;
+ struct sk_buff *rxskb;
+ dma_addr_t txbuf_dma;
+ dma_addr_t rxbuf_dma;
+ dma_regs_t *txdma;
+ dma_regs_t *rxdma;
+
+ struct net_device_stats stats;
+ struct device *dev;
+ struct irda_platform_data *pdata;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+};
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+
+#define HPSIR_MAX_RXLEN 2047
+
+/*
+ * Allocate and map the receive buffer, unless it is already allocated.
+ */
+static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
+{
+ if (si->rxskb)
+ return 0;
+
+ si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+
+ if (!si->rxskb) {
+ printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Align any IP headers that may be contained
+ * within the frame.
+ */
+ skb_reserve(si->rxskb, 1);
+
+ si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
+ HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ return 0;
+}
+
+/*
+ * We want to get here as soon as possible, and get the receiver setup.
+ * We use the existing buffer.
+ */
+static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
+{
+ if (!si->rxskb) {
+ printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
+ return;
+ }
+
+ /*
+ * First empty receive FIFO
+ */
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+
+ /*
+ * Enable the DMA, receiver and receive interrupt.
+ */
+ sa1100_clear_dma(si->rxdma);
+ sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+{
+ unsigned long flags;
+ int brd, ret = -EINVAL;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+ brd = 3686400 / (16 * speed) - 1;
+
+ /*
+ * Stop the receive DMA.
+ */
+ if (IS_FIR(si))
+ sa1100_stop_dma(si->rxdma);
+
+ local_irq_save(flags);
+
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+
+ Ser2UTCR1 = brd >> 8;
+ Ser2UTCR2 = brd;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ si->speed = speed;
+
+ local_irq_restore(flags);
+ ret = 0;
+ break;
+
+ case 4000000:
+ local_irq_save(flags);
+
+ si->hscr0 = 0;
+
+ Ser2HSSR0 = 0xff;
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+ Ser2UTCR3 = 0;
+
+ si->speed = speed;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ sa1100_irda_rx_alloc(si);
+ sa1100_irda_rx_dma_start(si);
+
+ local_irq_restore(flags);
+
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ * 0 - off
+ * 1 - short range, lowest power
+ * 2 - medium range, medium power
+ * 3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret = 0;
+ if (si->pdata->set_power)
+ ret = si->pdata->set_power(si->dev, state);
+ return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret;
+
+ ret = __sa1100_irda_set_power(si, state);
+ if (ret == 0)
+ si->power = state;
+
+ return ret;
+}
+
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+ int ret;
+
+ /*
+ * Ensure that the ports for this device are setup correctly.
+ */
+ if (si->pdata->startup)
+ si->pdata->startup(si->dev);
+
+ /*
+ * Configure PPC for IRDA - we want to drive TXD2 low.
+ * We also want to drive this pin low during sleep.
+ */
+ PPSR &= ~PPC_TXD2;
+ PSDR &= ~PPC_TXD2;
+ PPDR |= PPC_TXD2;
+
+ /*
+ * Enable HP-SIR modulation, and ensure that the port is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+ Ser2UTCR4 = si->utcr4;
+ Ser2UTCR0 = UTCR0_8BitData;
+ Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+ ret = sa1100_irda_set_speed(si, si->speed = 9600);
+ if (ret) {
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+ }
+
+ return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+ /*
+ * Stop all DMA activity.
+ */
+ sa1100_stop_dma(si->rxdma);
+ sa1100_stop_dma(si->txdma);
+
+ /* Disable the port. */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct sa1100_irda *si;
+
+ if (!dev || level != SUSPEND_DISABLE)
+ return 0;
+
+ si = dev->priv;
+ if (si->open) {
+ /*
+ * Stop the transmit queue
+ */
+ netif_device_detach(dev);
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+ __sa1100_irda_set_power(si, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct device *_dev, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct sa1100_irda *si;
+
+ if (!dev || level != RESUME_ENABLE)
+ return 0;
+
+ si = dev->priv;
+ if (si->open) {
+ /*
+ * If we missed a speed change, initialise at the new speed
+ * directly. It is debatable whether this is actually
+ * required, but in the interests of continuing from where
+ * we left off it is desireable. The converse argument is
+ * that we should re-negotiate at 9600 baud again.
+ */
+ if (si->newspeed) {
+ si->speed = si->newspeed;
+ si->newspeed = 0;
+ }
+
+ sa1100_irda_startup(si);
+ __sa1100_irda_set_power(si, si->power);
+ enable_irq(dev->irq);
+
+ /*
+ * This automatically wakes up the queue
+ */
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+#else
+#define sa1100_irda_suspend NULL
+#define sa1100_irda_resume NULL
+#endif
+
+/*
+ * HP-SIR format interrupt service routines.
+ */
+static void sa1100_irda_hpsir_irq(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int status;
+
+ status = Ser2UTSR0;
+
+ /*
+ * Deal with any receive errors first. The bytes in error may be
+ * the only bytes in the receive FIFO, so we do this first.
+ */
+ while (status & UTSR0_EIF) {
+ int stat, data;
+
+ stat = Ser2UTSR1;
+ data = Ser2UTDR;
+
+ if (stat & (UTSR1_FRE | UTSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & UTSR1_FRE)
+ si->stats.rx_frame_errors++;
+ if (stat & UTSR1_ROR)
+ si->stats.rx_fifo_errors++;
+ } else
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
+
+ status = Ser2UTSR0;
+ }
+
+ /*
+ * We must clear certain bits.
+ */
+ Ser2UTSR0 = status & (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+ if (status & UTSR0_RFS) {
+ /*
+ * There are at least 4 bytes in the FIFO. Read 3 bytes
+ * and leave the rest to the block below.
+ */
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
+ }
+
+ if (status & (UTSR0_RFS | UTSR0_RID)) {
+ /*
+ * Fifo contains more than 1 character.
+ */
+ do {
+ async_unwrap_char(dev, &si->stats, &si->rx_buff,
+ Ser2UTDR);
+ } while (Ser2UTSR1 & UTSR1_RNE);
+
+ dev->last_rx = jiffies;
+ }
+
+ if (status & UTSR0_TFS && si->tx_buff.len) {
+ /*
+ * Transmitter FIFO is not full
+ */
+ do {
+ Ser2UTDR = *si->tx_buff.data++;
+ si->tx_buff.len -= 1;
+ } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
+
+ if (si->tx_buff.len == 0) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->tx_buff.data -
+ si->tx_buff.head;
+
+ /*
+ * We need to ensure that the transmitter has
+ * finished.
+ */
+ do
+ rmb();
+ while (Ser2UTSR1 & UTSR1_TBY);
+
+ /*
+ * Ok, we've finished transmitting. Now enable
+ * the receiver. Sometimes we get a receive IRQ
+ * immediately after a transmit...
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ }
+
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+ }
+ }
+}
+
+static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
+{
+ struct sk_buff *skb = si->rxskb;
+ dma_addr_t dma_addr;
+ unsigned int len, stat, data;
+
+ if (!skb) {
+ printk(KERN_ERR "sa1100_ir: SKB is NULL!\n");
+ return;
+ }
+
+ /*
+ * Get the current data position.
+ */
+ dma_addr = sa1100_get_dma_pos(si->rxdma);
+ len = dma_addr - si->rxbuf_dma;
+ if (len > HPSIR_MAX_RXLEN)
+ len = HPSIR_MAX_RXLEN;
+ dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
+
+ do {
+ /*
+ * Read Status, and then Data.
+ */
+ stat = Ser2HSSR1;
+ rmb();
+ data = Ser2HSDR;
+
+ if (stat & (HSSR1_CRE | HSSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & HSSR1_CRE)
+ si->stats.rx_crc_errors++;
+ if (stat & HSSR1_ROR)
+ si->stats.rx_frame_errors++;
+ } else
+ skb->data[len++] = data;
+
+ /*
+ * If we hit the end of frame, there's
+ * no point in continuing.
+ */
+ if (stat & HSSR1_EOF)
+ break;
+ } while (Ser2HSSR0 & HSSR0_EIF);
+
+ if (stat & HSSR1_EOF) {
+ si->rxskb = NULL;
+
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ /*
+ * Before we pass the buffer up, allocate a new one.
+ */
+ sa1100_irda_rx_alloc(si);
+
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ } else {
+ /*
+ * Remap the buffer.
+ */
+ si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
+ HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ }
+}
+
+/*
+ * FIR format interrupt service routine. We only have to
+ * handle RX events; transmit events go via the TX DMA handler.
+ *
+ * No matter what, we disable RX, process, and the restart RX.
+ */
+static void sa1100_irda_fir_irq(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+
+ /*
+ * Stop RX DMA
+ */
+ sa1100_stop_dma(si->rxdma);
+
+ /*
+ * Framing error - we throw away the packet completely.
+ * Clearing RXE flushes the error conditions and data
+ * from the fifo.
+ */
+ if (Ser2HSSR0 & (HSSR0_FRE | HSSR0_RAB)) {
+ si->stats.rx_errors++;
+
+ if (Ser2HSSR0 & HSSR0_FRE)
+ si->stats.rx_frame_errors++;
+
+ /*
+ * Clear out the DMA...
+ */
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+
+ /*
+ * Clear selected status bits now, so we
+ * don't miss them next time around.
+ */
+ Ser2HSSR0 = HSSR0_FRE | HSSR0_RAB;
+ }
+
+ /*
+ * Deal with any receive errors. The any of the lowest
+ * 8 bytes in the FIFO may contain an error. We must read
+ * them one by one. The "error" could even be the end of
+ * packet!
+ */
+ if (Ser2HSSR0 & HSSR0_EIF)
+ sa1100_irda_fir_error(si, dev);
+
+ /*
+ * No matter what happens, we must restart reception.
+ */
+ sa1100_irda_rx_dma_start(si);
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ if (IS_FIR(((struct sa1100_irda *)dev->priv)))
+ sa1100_irda_fir_irq(dev);
+ else
+ sa1100_irda_hpsir_irq(dev);
+ return IRQ_HANDLED;
+}
+
+/*
+ * TX DMA completion handler.
+ */
+static void sa1100_irda_txdma_irq(void *id)
+{
+ struct net_device *dev = id;
+ struct sa1100_irda *si = dev->priv;
+ struct sk_buff *skb = si->txskb;
+
+ si->txskb = NULL;
+
+ /*
+ * Wait for the transmission to complete. Unfortunately,
+ * the hardware doesn't give us an interrupt to indicate
+ * "end of frame".
+ */
+ do
+ rmb();
+ while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+
+ /*
+ * Clear the transmit underrun bit.
+ */
+ Ser2HSSR0 = HSSR0_TUR;
+
+ /*
+ * Do we need to change speed? Note that we're lazy
+ * here - we don't free the old rxskb. We don't need
+ * to allocate a buffer either.
+ */
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ }
+
+ /*
+ * Start reception. This disables the transmitter for
+ * us. This will be using the existing RX buffer.
+ */
+ sa1100_irda_rx_dma_start(si);
+
+ /*
+ * Account and free the packet.
+ */
+ if (skb) {
+ dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
+ si->stats.tx_packets ++;
+ si->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ /*
+ * Make sure that the TX queue is available for sending
+ * (for retries). TX has priority over RX at all times.
+ */
+ netif_wake_queue(dev);
+}
+
+static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ sa1100_irda_set_speed(si, speed);
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ if (!IS_FIR(si)) {
+ netif_stop_queue(dev);
+
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
+ si->tx_buff.truesize);
+
+ /*
+ * Set the transmit interrupt enable. This will fire
+ * off an interrupt immediately. Note that we disable
+ * the receiver so we won't get spurious characteres
+ * received.
+ */
+ Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
+
+ dev_kfree_skb(skb);
+ } else {
+ int mtt = irda_get_mtt(skb);
+
+ /*
+ * We must not be transmitting...
+ */
+ if (si->txskb)
+ BUG();
+
+ netif_stop_queue(dev);
+
+ si->txskb = skb;
+ si->txbuf_dma = dma_map_single(si->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+
+ sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
+
+ /*
+ * If we have a mean turn-around time, impose the specified
+ * specified delay. We could shorten this by timing from
+ * the point we received the packet.
+ */
+ if (mtt)
+ udelay(mtt);
+
+ Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
+ }
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static int
+sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct sa1100_irda *si = dev->priv;
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (si->open) {
+ ret = sa1100_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk("sa1100_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *sa1100_irda_stats(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ return &si->stats;
+}
+
+static int sa1100_irda_start(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+ int err;
+
+ si->speed = 9600;
+
+ err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq;
+
+ err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
+ NULL, NULL, &si->rxdma);
+ if (err)
+ goto err_rx_dma;
+
+ err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
+ sa1100_irda_txdma_irq, dev, &si->txdma);
+ if (err)
+ goto err_tx_dma;
+
+ /*
+ * The interrupt must remain disabled for now.
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Setup the serial port for the specified speed.
+ */
+ err = sa1100_irda_startup(si);
+ if (err)
+ goto err_startup;
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "sa1100");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ si->open = 1;
+ sa1100_set_power(si, power_level); /* low power mode */
+ enable_irq(dev->irq);
+ netif_start_queue(dev);
+ return 0;
+
+err_irlap:
+ si->open = 0;
+ sa1100_irda_shutdown(si);
+err_startup:
+ sa1100_free_dma(si->txdma);
+err_tx_dma:
+ sa1100_free_dma(si->rxdma);
+err_rx_dma:
+ free_irq(dev->irq, dev);
+err_irq:
+ return err;
+}
+
+static int sa1100_irda_stop(struct net_device *dev)
+{
+ struct sa1100_irda *si = dev->priv;
+
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+
+ /*
+ * If we have been doing DMA receive, make sure we
+ * tidy that up cleanly.
+ */
+ if (si->rxskb) {
+ dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(si->rxskb);
+ si->rxskb = NULL;
+ }
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ netif_stop_queue(dev);
+ si->open = 0;
+
+ /*
+ * Free resources
+ */
+ sa1100_free_dma(si->txdma);
+ sa1100_free_dma(si->rxdma);
+ free_irq(dev->irq, dev);
+
+ sa1100_set_power(si, 0);
+
+ return 0;
+}
+
+static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int sa1100_irda_probe(struct device *_dev)
+{
+ struct platform_device *pdev = to_platform_device(_dev);
+ struct net_device *dev;
+ struct sa1100_irda *si;
+ unsigned int baudrate_mask;
+ int err;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+ err = request_mem_region(__PREG(Ser2HSCR0), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+ err = request_mem_region(__PREG(Ser2HSCR2), 0x04, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_3;
+
+ dev = alloc_irdadev(sizeof(struct sa1100_irda));
+ if (!dev)
+ goto err_mem_4;
+
+ si = dev->priv;
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ /*
+ * Initialise the HP-SIR buffers
+ */
+ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_5;
+ err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
+ if (err)
+ goto err_mem_5;
+
+ dev->hard_start_xmit = sa1100_irda_hard_xmit;
+ dev->open = sa1100_irda_start;
+ dev->stop = sa1100_irda_stop;
+ dev->do_ioctl = sa1100_irda_ioctl;
+ dev->get_stats = sa1100_irda_stats;
+ dev->irq = IRQ_Ser2ICP;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ /*
+ * We support original IRDA up to 115k2. (we don't currently
+ * support 4Mbps). Min Turn Time set to 1ms or greater.
+ */
+ baudrate_mask = IR_9600;
+
+ switch (max_rate) {
+ case 4000000: baudrate_mask |= IR_4000000 << 8;
+ case 115200: baudrate_mask |= IR_115200;
+ case 57600: baudrate_mask |= IR_57600;
+ case 38400: baudrate_mask |= IR_38400;
+ case 19200: baudrate_mask |= IR_19200;
+ }
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7;
+
+ irda_qos_bits_to_value(&si->qos);
+
+ si->utcr4 = UTCR4_HPSIR;
+ if (tx_lpm)
+ si->utcr4 |= UTCR4_Z1_6us;
+
+ /*
+ * Initially enable HP-SIR modulation, and ensure that the port
+ * is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2UTCR4 = si->utcr4;
+ Ser2HSCR0 = HSCR0_UART;
+
+ err = register_netdev(dev);
+ if (err == 0)
+ dev_set_drvdata(&pdev->dev, dev);
+
+ if (err) {
+ err_mem_5:
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ err_mem_4:
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ err_mem_3:
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ err_mem_2:
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+ }
+ err_mem_1:
+ return err;
+}
+
+static int sa1100_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ struct sa1100_irda *si = dev->priv;
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+
+ return 0;
+}
+
+static struct device_driver sa1100ir_driver = {
+ .name = "sa11x0-ir",
+ .bus = &platform_bus_type,
+ .probe = sa1100_irda_probe,
+ .remove = sa1100_irda_remove,
+ .suspend = sa1100_irda_suspend,
+ .resume = sa1100_irda_resume,
+};
+
+static int __init sa1100_irda_init(void)
+{
+ /*
+ * Limit power level a sensible range.
+ */
+ if (power_level < 1)
+ power_level = 1;
+ if (power_level > 3)
+ power_level = 3;
+
+ return driver_register(&sa1100ir_driver);
+}
+
+static void __exit sa1100_irda_exit(void)
+{
+ driver_unregister(&sa1100ir_driver);
+}
+
+module_init(sa1100_irda_init);
+module_exit(sa1100_irda_exit);
+module_param(power_level, int, 0);
+module_param(tx_lpm, int, 0);
+module_param(max_rate, int, 0);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("StrongARM SA1100 IrDA driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
+MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
diff --git a/drivers/net/irda/sir-dev.h b/drivers/net/irda/sir-dev.h
new file mode 100644
index 000000000000..f0b8bc3637e5
--- /dev/null
+++ b/drivers/net/irda/sir-dev.h
@@ -0,0 +1,202 @@
+/*********************************************************************
+ *
+ * sir.h: include file for irda-sir device abstraction layer
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef IRDA_SIR_H
+#define IRDA_SIR_H
+
+#include <linux/netdevice.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h> // iobuff_t
+
+/* FIXME: unify irda_request with sir_fsm! */
+
+struct irda_request {
+ struct list_head lh_request;
+ unsigned long pending;
+ void (*func)(void *);
+ void *data;
+ struct timer_list timer;
+};
+
+struct sir_fsm {
+ struct semaphore sem;
+ struct irda_request rq;
+ unsigned state, substate;
+ int param;
+ int result;
+};
+
+#define SIRDEV_STATE_WAIT_TX_COMPLETE 0x0100
+
+/* substates for wait_tx_complete */
+#define SIRDEV_STATE_WAIT_XMIT 0x0101
+#define SIRDEV_STATE_WAIT_UNTIL_SENT 0x0102
+#define SIRDEV_STATE_TX_DONE 0x0103
+
+#define SIRDEV_STATE_DONGLE_OPEN 0x0300
+
+/* 0x0301-0x03ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_DONGLE_CLOSE 0x0400
+
+/* 0x0401-0x04ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_SET_DTR_RTS 0x0500
+
+#define SIRDEV_STATE_SET_SPEED 0x0700
+#define SIRDEV_STATE_DONGLE_CHECK 0x0800
+#define SIRDEV_STATE_DONGLE_RESET 0x0900
+
+/* 0x0901-0x09ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_DONGLE_SPEED 0x0a00
+/* 0x0a01-0x0aff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_PORT_SPEED 0x0b00
+#define SIRDEV_STATE_DONE 0x0c00
+#define SIRDEV_STATE_ERROR 0x0d00
+#define SIRDEV_STATE_COMPLETE 0x0e00
+
+#define SIRDEV_STATE_DEAD 0xffff
+
+
+struct sir_dev;
+
+struct dongle_driver {
+
+ struct module *owner;
+
+ const char *driver_name;
+
+ IRDA_DONGLE type;
+
+ int (*open)(struct sir_dev *dev);
+ int (*close)(struct sir_dev *dev);
+ int (*reset)(struct sir_dev *dev);
+ int (*set_speed)(struct sir_dev *dev, unsigned speed);
+
+ struct list_head dongle_list;
+};
+
+struct sir_driver {
+
+ struct module *owner;
+
+ const char *driver_name;
+
+ int qos_mtt_bits;
+
+ int (*chars_in_buffer)(struct sir_dev *dev);
+ void (*wait_until_sent)(struct sir_dev *dev);
+ int (*set_speed)(struct sir_dev *dev, unsigned speed);
+ int (*set_dtr_rts)(struct sir_dev *dev, int dtr, int rts);
+
+ int (*do_write)(struct sir_dev *dev, const unsigned char *ptr, size_t len);
+
+ int (*start_dev)(struct sir_dev *dev);
+ int (*stop_dev)(struct sir_dev *dev);
+};
+
+
+/* exported */
+
+extern int irda_register_dongle(struct dongle_driver *new);
+extern int irda_unregister_dongle(struct dongle_driver *drv);
+
+extern struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *name);
+extern int sirdev_put_instance(struct sir_dev *self);
+
+extern int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type);
+extern void sirdev_write_complete(struct sir_dev *dev);
+extern int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count);
+
+/* low level helpers for SIR device/dongle setup */
+extern int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len);
+extern int sirdev_raw_read(struct sir_dev *dev, char *buf, int len);
+extern int sirdev_set_dtr_rts(struct sir_dev *dev, int dtr, int rts);
+
+/* not exported */
+
+extern int sirdev_get_dongle(struct sir_dev *self, IRDA_DONGLE type);
+extern int sirdev_put_dongle(struct sir_dev *self);
+
+extern void sirdev_enable_rx(struct sir_dev *dev);
+extern int sirdev_schedule_request(struct sir_dev *dev, int state, unsigned param);
+extern int __init irda_thread_create(void);
+extern void __exit irda_thread_join(void);
+
+/* inline helpers */
+
+static inline int sirdev_schedule_speed(struct sir_dev *dev, unsigned speed)
+{
+ return sirdev_schedule_request(dev, SIRDEV_STATE_SET_SPEED, speed);
+}
+
+static inline int sirdev_schedule_dongle_open(struct sir_dev *dev, int dongle_id)
+{
+ return sirdev_schedule_request(dev, SIRDEV_STATE_DONGLE_OPEN, dongle_id);
+}
+
+static inline int sirdev_schedule_dongle_close(struct sir_dev *dev)
+{
+ return sirdev_schedule_request(dev, SIRDEV_STATE_DONGLE_CLOSE, 0);
+}
+
+static inline int sirdev_schedule_dtr_rts(struct sir_dev *dev, int dtr, int rts)
+{
+ int dtrrts;
+
+ dtrrts = ((dtr) ? 0x02 : 0x00) | ((rts) ? 0x01 : 0x00);
+ return sirdev_schedule_request(dev, SIRDEV_STATE_SET_DTR_RTS, dtrrts);
+}
+
+#if 0
+static inline int sirdev_schedule_mode(struct sir_dev *dev, int mode)
+{
+ return sirdev_schedule_request(dev, SIRDEV_STATE_SET_MODE, mode);
+}
+#endif
+
+
+struct sir_dev {
+ struct net_device *netdev;
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap;
+
+ struct qos_info qos;
+
+ char hwname[32];
+
+ struct sir_fsm fsm;
+ atomic_t enable_rx;
+ int raw_tx;
+ spinlock_t tx_lock;
+
+ u32 new_speed;
+ u32 flags;
+
+ unsigned speed;
+
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ struct sk_buff *tx_skb;
+
+ const struct dongle_driver * dongle_drv;
+ const struct sir_driver * drv;
+ void *priv;
+
+};
+
+#endif /* IRDA_SIR_H */
diff --git a/drivers/net/irda/sir_core.c b/drivers/net/irda/sir_core.c
new file mode 100644
index 000000000000..a49f910c835b
--- /dev/null
+++ b/drivers/net/irda/sir_core.c
@@ -0,0 +1,56 @@
+/*********************************************************************
+ *
+ * sir_core.c: module core for irda-sir abstraction layer
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/***************************************************************************/
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
+
+/***************************************************************************/
+
+EXPORT_SYMBOL(irda_register_dongle);
+EXPORT_SYMBOL(irda_unregister_dongle);
+
+EXPORT_SYMBOL(sirdev_get_instance);
+EXPORT_SYMBOL(sirdev_put_instance);
+
+EXPORT_SYMBOL(sirdev_set_dongle);
+EXPORT_SYMBOL(sirdev_write_complete);
+EXPORT_SYMBOL(sirdev_receive);
+
+EXPORT_SYMBOL(sirdev_raw_write);
+EXPORT_SYMBOL(sirdev_raw_read);
+EXPORT_SYMBOL(sirdev_set_dtr_rts);
+
+static int __init sir_core_init(void)
+{
+ return irda_thread_create();
+}
+
+static void __exit sir_core_exit(void)
+{
+ irda_thread_join();
+}
+
+module_init(sir_core_init);
+module_exit(sir_core_exit);
+
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
new file mode 100644
index 000000000000..efc5a8870565
--- /dev/null
+++ b/drivers/net/irda/sir_dev.c
@@ -0,0 +1,677 @@
+/*********************************************************************
+ *
+ * sir_dev.c: irda sir network device
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include "sir-dev.h"
+
+/***************************************************************************/
+
+void sirdev_enable_rx(struct sir_dev *dev)
+{
+ if (unlikely(atomic_read(&dev->enable_rx)))
+ return;
+
+ /* flush rx-buffer - should also help in case of problems with echo cancelation */
+ dev->rx_buff.data = dev->rx_buff.head;
+ dev->rx_buff.len = 0;
+ dev->rx_buff.in_frame = FALSE;
+ dev->rx_buff.state = OUTSIDE_FRAME;
+ atomic_set(&dev->enable_rx, 1);
+}
+
+static int sirdev_is_receiving(struct sir_dev *dev)
+{
+ if (!atomic_read(&dev->enable_rx))
+ return 0;
+
+ return (dev->rx_buff.state != OUTSIDE_FRAME);
+}
+
+int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type)
+{
+ int err;
+
+ IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type);
+
+ err = sirdev_schedule_dongle_open(dev, type);
+ if (unlikely(err))
+ return err;
+ down(&dev->fsm.sem); /* block until config change completed */
+ err = dev->fsm.result;
+ up(&dev->fsm.sem);
+ return err;
+}
+
+/* used by dongle drivers for dongle programming */
+
+int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len)
+{
+ unsigned long flags;
+ int ret;
+
+ if (unlikely(len > dev->tx_buff.truesize))
+ return -ENOSPC;
+
+ spin_lock_irqsave(&dev->tx_lock, flags); /* serialize with other tx operations */
+ while (dev->tx_buff.len > 0) { /* wait until tx idle */
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&dev->tx_lock, flags);
+ }
+
+ dev->tx_buff.data = dev->tx_buff.head;
+ memcpy(dev->tx_buff.data, buf, len);
+ dev->tx_buff.len = len;
+
+ ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
+ if (ret > 0) {
+ IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__);
+
+ dev->tx_buff.data += ret;
+ dev->tx_buff.len -= ret;
+ dev->raw_tx = 1;
+ ret = len; /* all data is going to be sent */
+ }
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
+ return ret;
+}
+
+/* seems some dongle drivers may need this */
+
+int sirdev_raw_read(struct sir_dev *dev, char *buf, int len)
+{
+ int count;
+
+ if (atomic_read(&dev->enable_rx))
+ return -EIO; /* fail if we expect irda-frames */
+
+ count = (len < dev->rx_buff.len) ? len : dev->rx_buff.len;
+
+ if (count > 0) {
+ memcpy(buf, dev->rx_buff.data, count);
+ dev->rx_buff.data += count;
+ dev->rx_buff.len -= count;
+ }
+
+ /* remaining stuff gets flushed when re-enabling normal rx */
+
+ return count;
+}
+
+int sirdev_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
+{
+ int ret = -ENXIO;
+ if (dev->drv->set_dtr_rts != 0)
+ ret = dev->drv->set_dtr_rts(dev, dtr, rts);
+ return ret;
+}
+
+/**********************************************************************/
+
+/* called from client driver - likely with bh-context - to indicate
+ * it made some progress with transmission. Hence we send the next
+ * chunk, if any, or complete the skb otherwise
+ */
+
+void sirdev_write_complete(struct sir_dev *dev)
+{
+ unsigned long flags;
+ struct sk_buff *skb;
+ int actual = 0;
+ int err;
+
+ spin_lock_irqsave(&dev->tx_lock, flags);
+
+ IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
+ __FUNCTION__, dev->tx_buff.len);
+
+ if (likely(dev->tx_buff.len > 0)) {
+ /* Write data left in transmit buffer */
+ actual = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
+
+ if (likely(actual>0)) {
+ dev->tx_buff.data += actual;
+ dev->tx_buff.len -= actual;
+ }
+ else if (unlikely(actual<0)) {
+ /* could be dropped later when we have tx_timeout to recover */
+ IRDA_ERROR("%s: drv->do_write failed (%d)\n",
+ __FUNCTION__, actual);
+ if ((skb=dev->tx_skb) != NULL) {
+ dev->tx_skb = NULL;
+ dev_kfree_skb_any(skb);
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+ }
+ dev->tx_buff.len = 0;
+ }
+ if (dev->tx_buff.len > 0)
+ goto done; /* more data to send later */
+ }
+
+ if (unlikely(dev->raw_tx != 0)) {
+ /* in raw mode we are just done now after the buffer was sent
+ * completely. Since this was requested by some dongle driver
+ * running under the control of the irda-thread we must take
+ * care here not to re-enable the queue. The queue will be
+ * restarted when the irda-thread has completed the request.
+ */
+
+ IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__);
+ dev->raw_tx = 0;
+ goto done; /* no post-frame handling in raw mode */
+ }
+
+ /* we have finished now sending this skb.
+ * update statistics and free the skb.
+ * finally we check and trigger a pending speed change, if any.
+ * if not we switch to rx mode and wake the queue for further
+ * packets.
+ * note the scheduled speed request blocks until the lower
+ * client driver and the corresponding hardware has really
+ * finished sending all data (xmit fifo drained f.e.)
+ * before the speed change gets finally done and the queue
+ * re-activated.
+ */
+
+ IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__);
+
+ if ((skb=dev->tx_skb) != NULL) {
+ dev->tx_skb = NULL;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_any(skb);
+ }
+
+ if (unlikely(dev->new_speed > 0)) {
+ IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__);
+ err = sirdev_schedule_speed(dev, dev->new_speed);
+ if (unlikely(err)) {
+ /* should never happen
+ * forget the speed change and hope the stack recovers
+ */
+ IRDA_ERROR("%s - schedule speed change failed: %d\n",
+ __FUNCTION__, err);
+ netif_wake_queue(dev->netdev);
+ }
+ /* else: success
+ * speed change in progress now
+ * on completion dev->new_speed gets cleared,
+ * rx-reenabled and the queue restarted
+ */
+ }
+ else {
+ sirdev_enable_rx(dev);
+ netif_wake_queue(dev->netdev);
+ }
+
+done:
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
+}
+
+/* called from client driver - likely with bh-context - to give us
+ * some more received bytes. We put them into the rx-buffer,
+ * normally unwrapping and building LAP-skb's (unless rx disabled)
+ */
+
+int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
+{
+ if (!dev || !dev->netdev) {
+ IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (!dev->irlap) {
+ IRDA_WARNING("%s - too early: %p / %zd!\n",
+ __FUNCTION__, cp, count);
+ return -1;
+ }
+
+ if (cp==NULL) {
+ /* error already at lower level receive
+ * just update stats and set media busy
+ */
+ irda_device_set_media_busy(dev->netdev, TRUE);
+ dev->stats.rx_dropped++;
+ IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count);
+ return 0;
+ }
+
+ /* Read the characters into the buffer */
+ if (likely(atomic_read(&dev->enable_rx))) {
+ while (count--)
+ /* Unwrap and destuff one byte */
+ async_unwrap_char(dev->netdev, &dev->stats,
+ &dev->rx_buff, *cp++);
+ } else {
+ while (count--) {
+ /* rx not enabled: save the raw bytes and never
+ * trigger any netif_rx. The received bytes are flushed
+ * later when we re-enable rx but might be read meanwhile
+ * by the dongle driver.
+ */
+ dev->rx_buff.data[dev->rx_buff.len++] = *cp++;
+
+ /* What should we do when the buffer is full? */
+ if (unlikely(dev->rx_buff.len == dev->rx_buff.truesize))
+ dev->rx_buff.len = 0;
+ }
+ }
+
+ return 0;
+}
+
+/**********************************************************************/
+
+/* callbacks from network layer */
+
+static struct net_device_stats *sirdev_get_stats(struct net_device *ndev)
+{
+ struct sir_dev *dev = ndev->priv;
+
+ return (dev) ? &dev->stats : NULL;
+}
+
+static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct sir_dev *dev = ndev->priv;
+ unsigned long flags;
+ int actual = 0;
+ int err;
+ s32 speed;
+
+ IRDA_ASSERT(dev != NULL, return 0;);
+
+ netif_stop_queue(ndev);
+
+ IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len);
+
+ speed = irda_get_next_speed(skb);
+ if ((speed != dev->speed) && (speed != -1)) {
+ if (!skb->len) {
+ err = sirdev_schedule_speed(dev, speed);
+ if (unlikely(err == -EWOULDBLOCK)) {
+ /* Failed to initiate the speed change, likely the fsm
+ * is still busy (pretty unlikely, but...)
+ * We refuse to accept the skb and return with the queue
+ * stopped so the network layer will retry after the
+ * fsm completes and wakes the queue.
+ */
+ return 1;
+ }
+ else if (unlikely(err)) {
+ /* other fatal error - forget the speed change and
+ * hope the stack will recover somehow
+ */
+ netif_start_queue(ndev);
+ }
+ /* else: success
+ * speed change in progress now
+ * on completion the queue gets restarted
+ */
+
+ dev_kfree_skb_any(skb);
+ return 0;
+ } else
+ dev->new_speed = speed;
+ }
+
+ /* Init tx buffer*/
+ dev->tx_buff.data = dev->tx_buff.head;
+
+ /* Check problems */
+ if(spin_is_locked(&dev->tx_lock)) {
+ IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__);
+ }
+
+ /* serialize with write completion */
+ spin_lock_irqsave(&dev->tx_lock, flags);
+
+ /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
+ dev->tx_buff.len = async_wrap_skb(skb, dev->tx_buff.data, dev->tx_buff.truesize);
+
+ /* transmission will start now - disable receive.
+ * if we are just in the middle of an incoming frame,
+ * treat it as collision. probably it's a good idea to
+ * reset the rx_buf OUTSIDE_FRAME in this case too?
+ */
+ atomic_set(&dev->enable_rx, 0);
+ if (unlikely(sirdev_is_receiving(dev)))
+ dev->stats.collisions++;
+
+ actual = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
+
+ if (likely(actual > 0)) {
+ dev->tx_skb = skb;
+ ndev->trans_start = jiffies;
+ dev->tx_buff.data += actual;
+ dev->tx_buff.len -= actual;
+ }
+ else if (unlikely(actual < 0)) {
+ /* could be dropped later when we have tx_timeout to recover */
+ IRDA_ERROR("%s: drv->do_write failed (%d)\n",
+ __FUNCTION__, actual);
+ dev_kfree_skb_any(skb);
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+ netif_wake_queue(ndev);
+ }
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
+
+ return 0;
+}
+
+/* called from network layer with rtnl hold */
+
+static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct sir_dev *dev = ndev->priv;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ ret = sirdev_schedule_speed(dev, irq->ifr_baudrate);
+ /* cannot sleep here for completion
+ * we are called from network layer with rtnl hold
+ */
+ break;
+
+ case SIOCSDONGLE: /* Set dongle */
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ ret = sirdev_schedule_dongle_open(dev, irq->ifr_dongle);
+ /* cannot sleep here for completion
+ * we are called from network layer with rtnl hold
+ */
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ irda_device_set_media_busy(dev->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = sirdev_is_receiving(dev);
+ break;
+
+ case SIOCSDTRRTS:
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ ret = sirdev_schedule_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
+ /* cannot sleep here for completion
+ * we are called from network layer with rtnl hold
+ */
+ break;
+
+ case SIOCSMODE:
+#if 0
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else
+ ret = sirdev_schedule_mode(dev, irq->ifr_mode);
+ /* cannot sleep here for completion
+ * we are called from network layer with rtnl hold
+ */
+ break;
+#endif
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/* ----------------------------------------------------------------------------- */
+
+#define SIRBUF_ALLOCSIZE 4269 /* worst case size of a wrapped IrLAP frame */
+
+static int sirdev_alloc_buffers(struct sir_dev *dev)
+{
+ dev->tx_buff.truesize = SIRBUF_ALLOCSIZE;
+ dev->rx_buff.truesize = IRDA_SKB_MAX_MTU;
+
+ /* Bootstrap ZeroCopy Rx */
+ dev->rx_buff.skb = __dev_alloc_skb(dev->rx_buff.truesize, GFP_KERNEL);
+ if (dev->rx_buff.skb == NULL)
+ return -ENOMEM;
+ skb_reserve(dev->rx_buff.skb, 1);
+ dev->rx_buff.head = dev->rx_buff.skb->data;
+
+ dev->tx_buff.head = kmalloc(dev->tx_buff.truesize, GFP_KERNEL);
+ if (dev->tx_buff.head == NULL) {
+ kfree_skb(dev->rx_buff.skb);
+ dev->rx_buff.skb = NULL;
+ dev->rx_buff.head = NULL;
+ return -ENOMEM;
+ }
+
+ dev->tx_buff.data = dev->tx_buff.head;
+ dev->rx_buff.data = dev->rx_buff.head;
+ dev->tx_buff.len = 0;
+ dev->rx_buff.len = 0;
+
+ dev->rx_buff.in_frame = FALSE;
+ dev->rx_buff.state = OUTSIDE_FRAME;
+ return 0;
+};
+
+static void sirdev_free_buffers(struct sir_dev *dev)
+{
+ if (dev->rx_buff.skb)
+ kfree_skb(dev->rx_buff.skb);
+ if (dev->tx_buff.head)
+ kfree(dev->tx_buff.head);
+ dev->rx_buff.head = dev->tx_buff.head = NULL;
+ dev->rx_buff.skb = NULL;
+}
+
+static int sirdev_open(struct net_device *ndev)
+{
+ struct sir_dev *dev = ndev->priv;
+ const struct sir_driver *drv = dev->drv;
+
+ if (!drv)
+ return -ENODEV;
+
+ /* increase the reference count of the driver module before doing serious stuff */
+ if (!try_module_get(drv->owner))
+ return -ESTALE;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ if (sirdev_alloc_buffers(dev))
+ goto errout_dec;
+
+ if (!dev->drv->start_dev || dev->drv->start_dev(dev))
+ goto errout_free;
+
+ sirdev_enable_rx(dev);
+ dev->raw_tx = 0;
+
+ netif_start_queue(ndev);
+ dev->irlap = irlap_open(ndev, &dev->qos, dev->hwname);
+ if (!dev->irlap)
+ goto errout_stop;
+
+ netif_wake_queue(ndev);
+
+ IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
+
+ return 0;
+
+errout_stop:
+ atomic_set(&dev->enable_rx, 0);
+ if (dev->drv->stop_dev)
+ dev->drv->stop_dev(dev);
+errout_free:
+ sirdev_free_buffers(dev);
+errout_dec:
+ module_put(drv->owner);
+ return -EAGAIN;
+}
+
+static int sirdev_close(struct net_device *ndev)
+{
+ struct sir_dev *dev = ndev->priv;
+ const struct sir_driver *drv;
+
+// IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+
+ netif_stop_queue(ndev);
+
+ down(&dev->fsm.sem); /* block on pending config completion */
+
+ atomic_set(&dev->enable_rx, 0);
+
+ if (unlikely(!dev->irlap))
+ goto out;
+ irlap_close(dev->irlap);
+ dev->irlap = NULL;
+
+ drv = dev->drv;
+ if (unlikely(!drv || !dev->priv))
+ goto out;
+
+ if (drv->stop_dev)
+ drv->stop_dev(dev);
+
+ sirdev_free_buffers(dev);
+ module_put(drv->owner);
+
+out:
+ dev->speed = 0;
+ up(&dev->fsm.sem);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------------- */
+
+struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *name)
+{
+ struct net_device *ndev;
+ struct sir_dev *dev;
+
+ IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name);
+
+ /* instead of adding tests to protect against drv->do_write==NULL
+ * at several places we refuse to create a sir_dev instance for
+ * drivers which don't implement do_write.
+ */
+ if (!drv || !drv->do_write)
+ return NULL;
+
+ /*
+ * Allocate new instance of the device
+ */
+ ndev = alloc_irdadev(sizeof(*dev));
+ if (ndev == NULL) {
+ IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__);
+ goto out;
+ }
+ dev = ndev->priv;
+
+ irda_init_max_qos_capabilies(&dev->qos);
+ dev->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ dev->qos.min_turn_time.bits = drv->qos_mtt_bits;
+ irda_qos_bits_to_value(&dev->qos);
+
+ strncpy(dev->hwname, name, sizeof(dev->hwname)-1);
+
+ atomic_set(&dev->enable_rx, 0);
+ dev->tx_skb = NULL;
+
+ spin_lock_init(&dev->tx_lock);
+ init_MUTEX(&dev->fsm.sem);
+
+ INIT_LIST_HEAD(&dev->fsm.rq.lh_request);
+ dev->fsm.rq.pending = 0;
+ init_timer(&dev->fsm.rq.timer);
+
+ dev->drv = drv;
+ dev->netdev = ndev;
+
+ SET_MODULE_OWNER(ndev);
+
+ /* Override the network functions we need to use */
+ ndev->hard_start_xmit = sirdev_hard_xmit;
+ ndev->open = sirdev_open;
+ ndev->stop = sirdev_close;
+ ndev->get_stats = sirdev_get_stats;
+ ndev->do_ioctl = sirdev_ioctl;
+
+ if (register_netdev(ndev)) {
+ IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+ goto out_freenetdev;
+ }
+
+ return dev;
+
+out_freenetdev:
+ free_netdev(ndev);
+out:
+ return NULL;
+}
+
+int sirdev_put_instance(struct sir_dev *dev)
+{
+ int err = 0;
+
+ IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+
+ atomic_set(&dev->enable_rx, 0);
+
+ netif_carrier_off(dev->netdev);
+ netif_device_detach(dev->netdev);
+
+ if (dev->dongle_drv)
+ err = sirdev_schedule_dongle_close(dev);
+ if (err)
+ IRDA_ERROR("%s - error %d\n", __FUNCTION__, err);
+
+ sirdev_close(dev->netdev);
+
+ down(&dev->fsm.sem);
+ dev->fsm.state = SIRDEV_STATE_DEAD; /* mark staled */
+ dev->dongle_drv = NULL;
+ dev->priv = NULL;
+ up(&dev->fsm.sem);
+
+ /* Remove netdevice */
+ unregister_netdev(dev->netdev);
+
+ free_netdev(dev->netdev);
+
+ return 0;
+}
+
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
new file mode 100644
index 000000000000..c5b76746e72b
--- /dev/null
+++ b/drivers/net/irda/sir_dongle.c
@@ -0,0 +1,134 @@
+/*********************************************************************
+ *
+ * sir_dongle.c: manager for serial dongle protocol drivers
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/kmod.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/**************************************************************************
+ *
+ * dongle registration and attachment
+ *
+ */
+
+static LIST_HEAD(dongle_list); /* list of registered dongle drivers */
+static DECLARE_MUTEX(dongle_list_lock); /* protects the list */
+
+int irda_register_dongle(struct dongle_driver *new)
+{
+ struct list_head *entry;
+ struct dongle_driver *drv;
+
+ IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
+ __FUNCTION__, new->driver_name, new->type);
+
+ down(&dongle_list_lock);
+ list_for_each(entry, &dongle_list) {
+ drv = list_entry(entry, struct dongle_driver, dongle_list);
+ if (new->type == drv->type) {
+ up(&dongle_list_lock);
+ return -EEXIST;
+ }
+ }
+ list_add(&new->dongle_list, &dongle_list);
+ up(&dongle_list_lock);
+ return 0;
+}
+
+int irda_unregister_dongle(struct dongle_driver *drv)
+{
+ down(&dongle_list_lock);
+ list_del(&drv->dongle_list);
+ up(&dongle_list_lock);
+ return 0;
+}
+
+int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
+{
+ struct list_head *entry;
+ const struct dongle_driver *drv = NULL;
+ int err = -EINVAL;
+
+#ifdef CONFIG_KMOD
+ request_module("irda-dongle-%d", type);
+#endif
+
+ if (dev->dongle_drv != NULL)
+ return -EBUSY;
+
+ /* serialize access to the list of registered dongles */
+ down(&dongle_list_lock);
+
+ list_for_each(entry, &dongle_list) {
+ drv = list_entry(entry, struct dongle_driver, dongle_list);
+ if (drv->type == type)
+ break;
+ else
+ drv = NULL;
+ }
+
+ if (!drv) {
+ err = -ENODEV;
+ goto out_unlock; /* no such dongle */
+ }
+
+ /* handling of SMP races with dongle module removal - three cases:
+ * 1) dongle driver was already unregistered - then we haven't found the
+ * requested dongle above and are already out here
+ * 2) the module is already marked deleted but the driver is still
+ * registered - then the try_module_get() below will fail
+ * 3) the try_module_get() below succeeds before the module is marked
+ * deleted - then sys_delete_module() fails and prevents the removal
+ * because the module is in use.
+ */
+
+ if (!try_module_get(drv->owner)) {
+ err = -ESTALE;
+ goto out_unlock; /* rmmod already pending */
+ }
+ dev->dongle_drv = drv;
+
+ if (!drv->open || (err=drv->open(dev))!=0)
+ goto out_reject; /* failed to open driver */
+
+ up(&dongle_list_lock);
+ return 0;
+
+out_reject:
+ dev->dongle_drv = NULL;
+ module_put(drv->owner);
+out_unlock:
+ up(&dongle_list_lock);
+ return err;
+}
+
+int sirdev_put_dongle(struct sir_dev *dev)
+{
+ const struct dongle_driver *drv = dev->dongle_drv;
+
+ if (drv) {
+ if (drv->close)
+ drv->close(dev); /* close this dongle instance */
+
+ dev->dongle_drv = NULL; /* unlink the dongle driver */
+ module_put(drv->owner);/* decrement driver's module refcount */
+ }
+
+ return 0;
+}
diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c
new file mode 100644
index 000000000000..18cea1099530
--- /dev/null
+++ b/drivers/net/irda/sir_kthread.c
@@ -0,0 +1,502 @@
+/*********************************************************************
+ *
+ * sir_kthread.c: dedicated thread to process scheduled
+ * sir device setup requests
+ *
+ * Copyright (c) 2002 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/**************************************************************************
+ *
+ * kIrDAd kernel thread and config state machine
+ *
+ */
+
+struct irda_request_queue {
+ struct list_head request_list;
+ spinlock_t lock;
+ task_t *thread;
+ struct completion exit;
+ wait_queue_head_t kick, done;
+ atomic_t num_pending;
+};
+
+static struct irda_request_queue irda_rq_queue;
+
+static int irda_queue_request(struct irda_request *rq)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ if (!test_and_set_bit(0, &rq->pending)) {
+ spin_lock_irqsave(&irda_rq_queue.lock, flags);
+ list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
+ wake_up(&irda_rq_queue.kick);
+ atomic_inc(&irda_rq_queue.num_pending);
+ spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
+ ret = 1;
+ }
+ return ret;
+}
+
+static void irda_request_timer(unsigned long data)
+{
+ struct irda_request *rq = (struct irda_request *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irda_rq_queue.lock, flags);
+ list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
+ wake_up(&irda_rq_queue.kick);
+ spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
+}
+
+static int irda_queue_delayed_request(struct irda_request *rq, unsigned long delay)
+{
+ int ret = 0;
+ struct timer_list *timer = &rq->timer;
+
+ if (!test_and_set_bit(0, &rq->pending)) {
+ timer->expires = jiffies + delay;
+ timer->function = irda_request_timer;
+ timer->data = (unsigned long)rq;
+ atomic_inc(&irda_rq_queue.num_pending);
+ add_timer(timer);
+ ret = 1;
+ }
+ return ret;
+}
+
+static void run_irda_queue(void)
+{
+ unsigned long flags;
+ struct list_head *entry, *tmp;
+ struct irda_request *rq;
+
+ spin_lock_irqsave(&irda_rq_queue.lock, flags);
+ list_for_each_safe(entry, tmp, &irda_rq_queue.request_list) {
+ rq = list_entry(entry, struct irda_request, lh_request);
+ list_del_init(entry);
+ spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
+
+ clear_bit(0, &rq->pending);
+ rq->func(rq->data);
+
+ if (atomic_dec_and_test(&irda_rq_queue.num_pending))
+ wake_up(&irda_rq_queue.done);
+
+ spin_lock_irqsave(&irda_rq_queue.lock, flags);
+ }
+ spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
+}
+
+static int irda_thread(void *startup)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ daemonize("kIrDAd");
+
+ irda_rq_queue.thread = current;
+
+ complete((struct completion *)startup);
+
+ while (irda_rq_queue.thread != NULL) {
+
+ /* We use TASK_INTERRUPTIBLE, rather than
+ * TASK_UNINTERRUPTIBLE. Andrew Morton made this
+ * change ; he told me that it is safe, because "signal
+ * blocking is now handled in daemonize()", he added
+ * that the problem is that "uninterruptible sleep
+ * contributes to load average", making user worry.
+ * Jean II */
+ set_task_state(current, TASK_INTERRUPTIBLE);
+ add_wait_queue(&irda_rq_queue.kick, &wait);
+ if (list_empty(&irda_rq_queue.request_list))
+ schedule();
+ else
+ __set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&irda_rq_queue.kick, &wait);
+
+ /* make swsusp happy with our thread */
+ if (current->flags & PF_FREEZE)
+ refrigerator(PF_FREEZE);
+
+ run_irda_queue();
+ }
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
+ reparent_to_init();
+#endif
+ complete_and_exit(&irda_rq_queue.exit, 0);
+ /* never reached */
+ return 0;
+}
+
+
+static void flush_irda_queue(void)
+{
+ if (atomic_read(&irda_rq_queue.num_pending)) {
+
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (!list_empty(&irda_rq_queue.request_list))
+ run_irda_queue();
+
+ set_task_state(current, TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&irda_rq_queue.done, &wait);
+ if (atomic_read(&irda_rq_queue.num_pending))
+ schedule();
+ else
+ __set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&irda_rq_queue.done, &wait);
+ }
+}
+
+/* substate handler of the config-fsm to handle the cases where we want
+ * to wait for transmit completion before changing the port configuration
+ */
+
+static int irda_tx_complete_fsm(struct sir_dev *dev)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+ unsigned next_state, delay;
+ unsigned bytes_left;
+
+ do {
+ next_state = fsm->substate; /* default: stay in current substate */
+ delay = 0;
+
+ switch(fsm->substate) {
+
+ case SIRDEV_STATE_WAIT_XMIT:
+ if (dev->drv->chars_in_buffer)
+ bytes_left = dev->drv->chars_in_buffer(dev);
+ else
+ bytes_left = 0;
+ if (!bytes_left) {
+ next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
+ break;
+ }
+
+ if (dev->speed > 115200)
+ delay = (bytes_left*8*10000) / (dev->speed/100);
+ else if (dev->speed > 0)
+ delay = (bytes_left*10*10000) / (dev->speed/100);
+ else
+ delay = 0;
+ /* expected delay (usec) until remaining bytes are sent */
+ if (delay < 100) {
+ udelay(delay);
+ delay = 0;
+ break;
+ }
+ /* sleep some longer delay (msec) */
+ delay = (delay+999) / 1000;
+ break;
+
+ case SIRDEV_STATE_WAIT_UNTIL_SENT:
+ /* block until underlaying hardware buffer are empty */
+ if (dev->drv->wait_until_sent)
+ dev->drv->wait_until_sent(dev);
+ next_state = SIRDEV_STATE_TX_DONE;
+ break;
+
+ case SIRDEV_STATE_TX_DONE:
+ return 0;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ fsm->substate = next_state;
+ } while (delay == 0);
+ return delay;
+}
+
+/*
+ * Function irda_config_fsm
+ *
+ * State machine to handle the configuration of the device (and attached dongle, if any).
+ * This handler is scheduled for execution in kIrDAd context, so we can sleep.
+ * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
+ * long. Instead, for longer delays we start a timer to reschedule us later.
+ * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
+ * Both must be unlocked/restarted on completion - but only on final exit.
+ */
+
+static void irda_config_fsm(void *data)
+{
+ struct sir_dev *dev = data;
+ struct sir_fsm *fsm = &dev->fsm;
+ int next_state;
+ int ret = -1;
+ unsigned delay;
+
+ IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+ do {
+ IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
+ __FUNCTION__, fsm->state, fsm->substate);
+
+ next_state = fsm->state;
+ delay = 0;
+
+ switch(fsm->state) {
+
+ case SIRDEV_STATE_DONGLE_OPEN:
+ if (dev->dongle_drv != NULL) {
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+
+ /* Initialize dongle */
+ ret = sirdev_get_dongle(dev, fsm->param);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ /* Dongles are powered through the modem control lines which
+ * were just set during open. Before resetting, let's wait for
+ * the power to stabilize. This is what some dongle drivers did
+ * in open before, while others didn't - should be safe anyway.
+ */
+
+ delay = 50;
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+
+ fsm->param = 9600;
+
+ break;
+
+ case SIRDEV_STATE_DONGLE_CLOSE:
+ /* shouldn't we just treat this as success=? */
+ if (dev->dongle_drv == NULL) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_DTR_RTS:
+ ret = sirdev_set_dtr_rts(dev,
+ (fsm->param&0x02) ? TRUE : FALSE,
+ (fsm->param&0x01) ? TRUE : FALSE);
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_SPEED:
+ fsm->substate = SIRDEV_STATE_WAIT_XMIT;
+ next_state = SIRDEV_STATE_DONGLE_CHECK;
+ break;
+
+ case SIRDEV_STATE_DONGLE_CHECK:
+ ret = irda_tx_complete_fsm(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ if ((delay=ret) != 0)
+ break;
+
+ if (dev->dongle_drv) {
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+ }
+ else {
+ dev->speed = fsm->param;
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_RESET:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->reset(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0) {
+ /* set serial port according to dongle default speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
+ next_state = SIRDEV_STATE_DONGLE_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_SPEED:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->set_speed(dev, fsm->param);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0)
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ break;
+
+ case SIRDEV_STATE_PORT_SPEED:
+ /* Finally we are ready to change the serial port speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ dev->new_speed = 0;
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_DONE:
+ /* Signal network layer so it can send more frames */
+ netif_wake_queue(dev->netdev);
+ next_state = SIRDEV_STATE_COMPLETE;
+ break;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ fsm->result = -EINVAL;
+ /* fall thru */
+
+ case SIRDEV_STATE_ERROR:
+ IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+
+#if 0 /* don't enable this before we have netdev->tx_timeout to recover */
+ netif_stop_queue(dev->netdev);
+#else
+ netif_wake_queue(dev->netdev);
+#endif
+ /* fall thru */
+
+ case SIRDEV_STATE_COMPLETE:
+ /* config change finished, so we are not busy any longer */
+ sirdev_enable_rx(dev);
+ up(&fsm->sem);
+ return;
+ }
+ fsm->state = next_state;
+ } while(!delay);
+
+ irda_queue_delayed_request(&fsm->rq, msecs_to_jiffies(delay));
+}
+
+/* schedule some device configuration task for execution by kIrDAd
+ * on behalf of the above state machine.
+ * can be called from process or interrupt/tasklet context.
+ */
+
+int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+ int xmit_was_down;
+
+ IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+
+ if (down_trylock(&fsm->sem)) {
+ if (in_interrupt() || in_atomic() || irqs_disabled()) {
+ IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+ return -EWOULDBLOCK;
+ } else
+ down(&fsm->sem);
+ }
+
+ if (fsm->state == SIRDEV_STATE_DEAD) {
+ /* race with sirdev_close should never happen */
+ IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+ up(&fsm->sem);
+ return -ESTALE; /* or better EPIPE? */
+ }
+
+ xmit_was_down = netif_queue_stopped(dev->netdev);
+ netif_stop_queue(dev->netdev);
+ atomic_set(&dev->enable_rx, 0);
+
+ fsm->state = initial_state;
+ fsm->param = param;
+ fsm->result = 0;
+
+ INIT_LIST_HEAD(&fsm->rq.lh_request);
+ fsm->rq.pending = 0;
+ fsm->rq.func = irda_config_fsm;
+ fsm->rq.data = dev;
+
+ if (!irda_queue_request(&fsm->rq)) { /* returns 0 on error! */
+ atomic_set(&dev->enable_rx, 1);
+ if (!xmit_was_down)
+ netif_wake_queue(dev->netdev);
+ up(&fsm->sem);
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+int __init irda_thread_create(void)
+{
+ struct completion startup;
+ int pid;
+
+ spin_lock_init(&irda_rq_queue.lock);
+ irda_rq_queue.thread = NULL;
+ INIT_LIST_HEAD(&irda_rq_queue.request_list);
+ init_waitqueue_head(&irda_rq_queue.kick);
+ init_waitqueue_head(&irda_rq_queue.done);
+ atomic_set(&irda_rq_queue.num_pending, 0);
+
+ init_completion(&startup);
+ pid = kernel_thread(irda_thread, &startup, CLONE_FS|CLONE_FILES);
+ if (pid <= 0)
+ return -EAGAIN;
+ else
+ wait_for_completion(&startup);
+
+ return 0;
+}
+
+void __exit irda_thread_join(void)
+{
+ if (irda_rq_queue.thread) {
+ flush_irda_queue();
+ init_completion(&irda_rq_queue.exit);
+ irda_rq_queue.thread = NULL;
+ wake_up(&irda_rq_queue.kick);
+ wait_for_completion(&irda_rq_queue.exit);
+ }
+}
+
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
new file mode 100644
index 000000000000..10125a1dba22
--- /dev/null
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -0,0 +1,2396 @@
+/*********************************************************************
+ * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $
+ *
+ * Description: Driver for the SMC Infrared Communications Controller
+ * Status: Experimental.
+ * Author: Daniele Peri (peri@csai.unipa.it)
+ * Created at:
+ * Modified at:
+ * Modified by:
+ *
+ * Copyright (c) 2002 Daniele Peri
+ * All Rights Reserved.
+ * Copyright (c) 2002 Jean Tourrilhes
+ *
+ *
+ * Based on smc-ircc.c:
+ *
+ * Copyright (c) 2001 Stefani Seibold
+ * Copyright (c) 1999-2001 Dag Brattli
+ * Copyright (c) 1998-1999 Thomas Davis,
+ *
+ * and irport.c:
+ *
+ * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/serial_reg.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "smsc-ircc2.h"
+#include "smsc-sio.h"
+
+/* Types */
+
+struct smsc_transceiver {
+ char *name;
+ void (*set_for_speed)(int fir_base, u32 speed);
+ int (*probe)(int fir_base);
+};
+typedef struct smsc_transceiver smsc_transceiver_t;
+
+#if 0
+struct smc_chip {
+ char *name;
+ u16 flags;
+ u8 devid;
+ u8 rev;
+};
+typedef struct smc_chip smc_chip_t;
+#endif
+
+struct smsc_chip {
+ char *name;
+ #if 0
+ u8 type;
+ #endif
+ u16 flags;
+ u8 devid;
+ u8 rev;
+};
+typedef struct smsc_chip smsc_chip_t;
+
+struct smsc_chip_address {
+ unsigned int cfg_base;
+ unsigned int type;
+};
+typedef struct smsc_chip_address smsc_chip_address_t;
+
+/* Private data for each instance */
+struct smsc_ircc_cb {
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+ __u32 flags; /* Interface flags */
+
+ int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
+ int tx_len; /* Number of frames in tx_buff */
+
+ int transceiver;
+ struct pm_dev *pmdev;
+};
+
+/* Constants */
+
+static const char *driver_name = "smsc-ircc2";
+#define DIM(x) (sizeof(x)/(sizeof(*(x))))
+#define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600
+#define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1
+#define SMSC_IRCC2_C_NET_TIMEOUT 0
+#define SMSC_IRCC2_C_SIR_STOP 0
+
+/* Prototypes */
+
+static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
+static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
+static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
+static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
+static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
+static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
+static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self, int iobase);
+static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self, int iobase);
+static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
+static int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
+static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int iobase, int bofs);
+static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self, int iobase);
+static void smsc_ircc_change_speed(void *priv, u32 speed);
+static void smsc_ircc_set_sir_speed(void *priv, u32 speed);
+static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
+static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
+#if SMSC_IRCC2_C_SIR_STOP
+static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
+#endif
+static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
+static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
+static int smsc_ircc_net_open(struct net_device *dev);
+static int smsc_ircc_net_close(struct net_device *dev);
+static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#if SMSC_IRCC2_C_NET_TIMEOUT
+static void smsc_ircc_timeout(struct net_device *dev);
+#endif
+static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev);
+static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
+static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
+static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
+static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
+
+/* Probing */
+static int __init smsc_ircc_look_for_chips(void);
+static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type);
+static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfg_base, char *type);
+static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cfg_base, char *type);
+static int __init smsc_superio_fdc(unsigned short cfg_base);
+static int __init smsc_superio_lpc(unsigned short cfg_base);
+
+/* Transceivers specific functions */
+
+static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
+static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
+static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
+static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
+static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
+static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
+
+/* Power Management */
+
+static void smsc_ircc_suspend(struct smsc_ircc_cb *self);
+static void smsc_ircc_wakeup(struct smsc_ircc_cb *self);
+static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+
+/* Transceivers for SMSC-ircc */
+
+static smsc_transceiver_t smsc_transceivers[]=
+{
+ { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800},
+ { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select},
+ { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc},
+ { NULL, NULL}
+};
+#define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (DIM(smsc_transceivers)-1)
+
+/* SMC SuperIO chipsets definitions */
+
+#define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */
+#define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */
+#define NoIRDA 2 /* SuperIO Chip has no IRDA Port */
+#define SIR 0 /* SuperIO Chip has only slow IRDA */
+#define FIR 4 /* SuperIO Chip has fast IRDA */
+#define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
+
+static smsc_chip_t __initdata fdc_chips_flat[]=
+{
+ /* Base address 0x3f0 or 0x370 */
+ { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */
+ { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 },
+ { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 },
+ { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 },
+ { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */
+ { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 },
+ { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 },
+ { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 },
+ { NULL }
+};
+
+static smsc_chip_t __initdata fdc_chips_paged[]=
+{
+ /* Base address 0x3f0 or 0x370 */
+ { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
+ { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 },
+ { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 },
+ { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 },
+ { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 },
+ { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 },
+ { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 },
+ { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 },
+ { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 },
+ { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 },
+ { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 },
+ { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 },
+ { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 },
+ { NULL }
+};
+
+static smsc_chip_t __initdata lpc_chips_flat[]=
+{
+ /* Base address 0x2E or 0x4E */
+ { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 },
+ { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 },
+ { NULL }
+};
+
+static smsc_chip_t __initdata lpc_chips_paged[]=
+{
+ /* Base address 0x2E or 0x4E */
+ { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
+ { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 },
+ { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
+ { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 },
+ { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
+ { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 },
+ { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 },
+ { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 },
+ { NULL }
+};
+
+#define SMSCSIO_TYPE_FDC 1
+#define SMSCSIO_TYPE_LPC 2
+#define SMSCSIO_TYPE_FLAT 4
+#define SMSCSIO_TYPE_PAGED 8
+
+static smsc_chip_address_t __initdata possible_addresses[]=
+{
+ {0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
+ {0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
+ {0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
+ {0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
+ {0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
+ {0,0}
+};
+
+/* Globals */
+
+static struct smsc_ircc_cb *dev_self[] = { NULL, NULL};
+
+static int ircc_irq=255;
+static int ircc_dma=255;
+static int ircc_fir=0;
+static int ircc_sir=0;
+static int ircc_cfg=0;
+static int ircc_transceiver=0;
+
+static unsigned short dev_count=0;
+
+static inline void register_bank(int iobase, int bank)
+{
+ outb(((inb(iobase+IRCC_MASTER) & 0xf0) | (bank & 0x07)),
+ iobase+IRCC_MASTER);
+}
+
+
+/*******************************************************************************
+ *
+ *
+ * SMSC-ircc stuff
+ *
+ *
+ *******************************************************************************/
+
+/*
+ * Function smsc_ircc_init ()
+ *
+ * Initialize chip. Just try to find out how many chips we are dealing with
+ * and where they are
+ */
+static int __init smsc_ircc_init(void)
+{
+ int ret=-ENODEV;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ dev_count=0;
+
+ if ((ircc_fir>0)&&(ircc_sir>0)) {
+ IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
+ IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
+
+ if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq) == 0)
+ return 0;
+
+ return -ENODEV;
+ }
+
+ /* try user provided configuration register base address */
+ if (ircc_cfg>0) {
+ IRDA_MESSAGE(" Overriding configuration address 0x%04x\n",
+ ircc_cfg);
+ if (!smsc_superio_fdc(ircc_cfg))
+ ret = 0;
+ if (!smsc_superio_lpc(ircc_cfg))
+ ret = 0;
+ }
+
+ if(smsc_ircc_look_for_chips()>0) ret = 0;
+
+ return ret;
+}
+
+/*
+ * Function smsc_ircc_open (firbase, sirbase, dma, irq)
+ *
+ * Try to open driver instance
+ *
+ */
+static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
+{
+ struct smsc_ircc_cb *self;
+ struct net_device *dev;
+ int err;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ err = smsc_ircc_present(fir_base, sir_base);
+ if(err)
+ goto err_out;
+
+ err = -ENOMEM;
+ if (dev_count > DIM(dev_self)) {
+ IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
+ goto err_out1;
+ }
+
+ /*
+ * Allocate new instance of the driver
+ */
+ dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
+ if (!dev) {
+ IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
+ goto err_out1;
+ }
+
+ SET_MODULE_OWNER(dev);
+
+ dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
+#if SMSC_IRCC2_C_NET_TIMEOUT
+ dev->tx_timeout = smsc_ircc_timeout;
+ dev->watchdog_timeo = HZ*2; /* Allow enough time for speed change */
+#endif
+ dev->open = smsc_ircc_net_open;
+ dev->stop = smsc_ircc_net_close;
+ dev->do_ioctl = smsc_ircc_net_ioctl;
+ dev->get_stats = smsc_ircc_net_get_stats;
+
+ self = dev->priv;
+ self->netdev = dev;
+
+ /* Make ifconfig display some details */
+ dev->base_addr = self->io.fir_base = fir_base;
+ dev->irq = self->io.irq = irq;
+
+ /* Need to store self somewhere */
+ dev_self[dev_count++] = self;
+ spin_lock_init(&self->lock);
+
+ self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
+ self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
+
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
+ driver_name);
+ goto err_out2;
+ }
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
+ driver_name);
+ goto err_out3;
+ }
+
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
+
+ smsc_ircc_setup_qos(self);
+
+ smsc_ircc_init_chip(self);
+
+ if(ircc_transceiver > 0 &&
+ ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
+ self->transceiver = ircc_transceiver;
+ else
+ smsc_ircc_probe_transceiver(self);
+
+ err = register_netdev(self->netdev);
+ if(err) {
+ IRDA_ERROR("%s, Network device registration failed!\n",
+ driver_name);
+ goto err_out4;
+ }
+
+ self->pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, smsc_ircc_pmproc);
+ if (self->pmdev)
+ self->pmdev->data = self;
+
+ IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ return 0;
+ err_out4:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ err_out3:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ err_out2:
+ free_netdev(self->netdev);
+ dev_self[--dev_count] = NULL;
+ err_out1:
+ release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
+ release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
+ err_out:
+ return err;
+}
+
+/*
+ * Function smsc_ircc_present(fir_base, sir_base)
+ *
+ * Check the smsc-ircc chip presence
+ *
+ */
+static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
+{
+ unsigned char low, high, chip, config, dma, irq, version;
+
+ if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
+ driver_name)) {
+ IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
+ __FUNCTION__, fir_base);
+ goto out1;
+ }
+
+ if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
+ driver_name)) {
+ IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
+ __FUNCTION__, sir_base);
+ goto out2;
+ }
+
+ register_bank(fir_base, 3);
+
+ high = inb(fir_base+IRCC_ID_HIGH);
+ low = inb(fir_base+IRCC_ID_LOW);
+ chip = inb(fir_base+IRCC_CHIP_ID);
+ version = inb(fir_base+IRCC_VERSION);
+ config = inb(fir_base+IRCC_INTERFACE);
+ dma = config & IRCC_INTERFACE_DMA_MASK;
+ irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
+
+ if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
+ IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
+ __FUNCTION__, fir_base);
+ goto out3;
+ }
+ IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
+ "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
+ chip & 0x0f, version, fir_base, sir_base, dma, irq);
+
+ return 0;
+ out3:
+ release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
+ out2:
+ release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
+ out1:
+ return -ENODEV;
+}
+
+/*
+ * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
+ *
+ * Setup I/O
+ *
+ */
+static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
+ unsigned int fir_base, unsigned int sir_base,
+ u8 dma, u8 irq)
+{
+ unsigned char config, chip_dma, chip_irq;
+
+ register_bank(fir_base, 3);
+ config = inb(fir_base+IRCC_INTERFACE);
+ chip_dma = config & IRCC_INTERFACE_DMA_MASK;
+ chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
+
+ self->io.fir_base = fir_base;
+ self->io.sir_base = sir_base;
+ self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
+ self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
+ self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
+ self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
+
+ if (irq < 255) {
+ if (irq != chip_irq)
+ IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
+ driver_name, chip_irq, irq);
+ self->io.irq = irq;
+ }
+ else
+ self->io.irq = chip_irq;
+
+ if (dma < 255) {
+ if (dma != chip_dma)
+ IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
+ driver_name, chip_dma, dma);
+ self->io.dma = dma;
+ }
+ else
+ self->io.dma = chip_dma;
+
+}
+
+/*
+ * Function smsc_ircc_setup_qos(self)
+ *
+ * Setup qos
+ *
+ */
+static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
+{
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
+
+ self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
+ self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
+ irda_qos_bits_to_value(&self->qos);
+}
+
+/*
+ * Function smsc_ircc_init_chip(self)
+ *
+ * Init chip
+ *
+ */
+static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
+{
+ int iobase, ir_mode, ctrl, fast;
+
+ IRDA_ASSERT( self != NULL, return; );
+ iobase = self->io.fir_base;
+
+ ir_mode = IRCC_CFGA_IRDA_SIR_A;
+ ctrl = 0;
+ fast = 0;
+
+ register_bank(iobase, 0);
+ outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
+ outb(0x00, iobase+IRCC_MASTER);
+
+ register_bank(iobase, 1);
+ outb(((inb(iobase+IRCC_SCE_CFGA) & 0x87) | ir_mode),
+ iobase+IRCC_SCE_CFGA);
+
+#ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
+ outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
+ iobase+IRCC_SCE_CFGB);
+#else
+ outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
+ iobase+IRCC_SCE_CFGB);
+#endif
+ (void) inb(iobase+IRCC_FIFO_THRESHOLD);
+ outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase+IRCC_FIFO_THRESHOLD);
+
+ register_bank(iobase, 4);
+ outb((inb(iobase+IRCC_CONTROL) & 0x30) | ctrl, iobase+IRCC_CONTROL);
+
+ register_bank(iobase, 0);
+ outb(fast, iobase+IRCC_LCR_A);
+
+ smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
+
+ /* Power on device */
+ outb(0x00, iobase+IRCC_MASTER);
+}
+
+/*
+ * Function smsc_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct smsc_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ ret = -EPERM;
+ else {
+ /* Make sure we are the only one touching
+ * self->io.speed and the hardware - Jean II */
+ spin_lock_irqsave(&self->lock, flags);
+ smsc_ircc_change_speed(self, irq->ifr_baudrate);
+ spin_unlock_irqrestore(&self->lock, flags);
+ }
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = smsc_ircc_is_receiving(self);
+ break;
+ #if 0
+ case SIOCSDTRRTS:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
+ break;
+ #endif
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev)
+{
+ struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) dev->priv;
+
+ return &self->stats;
+}
+
+#if SMSC_IRCC2_C_NET_TIMEOUT
+/*
+ * Function smsc_ircc_timeout (struct net_device *dev)
+ *
+ * The networking timeout management.
+ *
+ */
+
+static void smsc_ircc_timeout(struct net_device *dev)
+{
+ struct smsc_ircc_cb *self;
+ unsigned long flags;
+
+ self = (struct smsc_ircc_cb *) dev->priv;
+
+ IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
+ dev->name, self->io.speed);
+ spin_lock_irqsave(&self->lock, flags);
+ smsc_ircc_sir_start(self);
+ smsc_ircc_change_speed(self, self->io.speed);
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+#endif
+
+/*
+ * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
+ *
+ * Transmits the current frame until FIFO is full, then
+ * waits until the next transmit interrupt, and continues until the
+ * frame is transmitted.
+ */
+int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct smsc_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ s32 speed;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return 0;);
+
+ self = (struct smsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.sir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure test of self->io.speed & speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ /*
+ * We send frames one by one in SIR mode (no
+ * pipelining), so at this point, if we were sending
+ * a previous frame, we just received the interrupt
+ * telling us it is finished (UART_IIR_THRI).
+ * Therefore, waiting for the transmitter to really
+ * finish draining the fifo won't take too long.
+ * And the interrupt handler is not expected to run.
+ * - Jean II */
+ smsc_ircc_sir_wait_hw_transmitter_finish(self);
+ smsc_ircc_change_speed(self, speed);
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else {
+ self->new_speed = speed;
+ }
+ }
+
+ /* Init tx buffer */
+ self->tx_buff.data = self->tx_buff.head;
+
+ /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* Turn on transmit finished interrupt. Will fire immediately! */
+ outb(UART_IER_THRI, iobase+UART_IER);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_set_fir_speed (self, baud)
+ *
+ * Change the speed of the device
+ *
+ */
+static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
+{
+ int fir_base, ir_mode, ctrl, fast;
+
+ IRDA_ASSERT(self != NULL, return;);
+ fir_base = self->io.fir_base;
+
+ self->io.speed = speed;
+
+ switch(speed) {
+ default:
+ case 576000:
+ ir_mode = IRCC_CFGA_IRDA_HDLC;
+ ctrl = IRCC_CRC;
+ fast = 0;
+ IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+ break;
+ case 1152000:
+ ir_mode = IRCC_CFGA_IRDA_HDLC;
+ ctrl = IRCC_1152 | IRCC_CRC;
+ fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
+ IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
+ __FUNCTION__);
+ break;
+ case 4000000:
+ ir_mode = IRCC_CFGA_IRDA_4PPM;
+ ctrl = IRCC_CRC;
+ fast = IRCC_LCR_A_FAST;
+ IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
+ __FUNCTION__);
+ break;
+ }
+ #if 0
+ Now in tranceiver!
+ /* This causes an interrupt */
+ register_bank(fir_base, 0);
+ outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast, fir_base+IRCC_LCR_A);
+ #endif
+
+ register_bank(fir_base, 1);
+ outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base+IRCC_SCE_CFGA);
+
+ register_bank(fir_base, 4);
+ outb((inb(fir_base+IRCC_CONTROL) & 0x30) | ctrl, fir_base+IRCC_CONTROL);
+}
+
+/*
+ * Function smsc_ircc_fir_start(self)
+ *
+ * Change the speed of the device
+ *
+ */
+static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
+{
+ struct net_device *dev;
+ int fir_base;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return;);
+ dev = self->netdev;
+ IRDA_ASSERT(dev != NULL, return;);
+
+ fir_base = self->io.fir_base;
+
+ /* Reset everything */
+
+ /* Install FIR transmit handler */
+ dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
+
+ /* Clear FIFO */
+ outb(inb(fir_base+IRCC_LCR_A)|IRCC_LCR_A_FIFO_RESET, fir_base+IRCC_LCR_A);
+
+ /* Enable interrupt */
+ /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER);*/
+
+ register_bank(fir_base, 1);
+
+ /* Select the TX/RX interface */
+#ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
+ outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
+ fir_base+IRCC_SCE_CFGB);
+#else
+ outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
+ fir_base+IRCC_SCE_CFGB);
+#endif
+ (void) inb(fir_base+IRCC_FIFO_THRESHOLD);
+
+ /* Enable SCE interrupts */
+ outb(0, fir_base+IRCC_MASTER);
+ register_bank(fir_base, 0);
+ outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, fir_base+IRCC_MASTER);
+}
+
+/*
+ * Function smsc_ircc_fir_stop(self, baud)
+ *
+ * Change the speed of the device
+ *
+ */
+static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
+{
+ int fir_base;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ fir_base = self->io.fir_base;
+ register_bank(fir_base, 0);
+ /*outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER);*/
+ outb(inb(fir_base+IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base+IRCC_LCR_B);
+}
+
+
+/*
+ * Function smsc_ircc_change_speed(self, baud)
+ *
+ * Change the speed of the device
+ *
+ * This function *must* be called with spinlock held, because it may
+ * be called from the irq handler. - Jean II
+ */
+static void smsc_ircc_change_speed(void *priv, u32 speed)
+{
+ struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv;
+ struct net_device *dev;
+ int iobase;
+ int last_speed_was_sir;
+
+ IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
+
+ IRDA_ASSERT(self != NULL, return;);
+ dev = self->netdev;
+ iobase = self->io.fir_base;
+
+ last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
+
+ #if 0
+ /* Temp Hack */
+ speed= 1152000;
+ self->io.speed = speed;
+ last_speed_was_sir = 0;
+ smsc_ircc_fir_start(self);
+ #endif
+
+ if(self->io.speed == 0)
+ smsc_ircc_sir_start(self);
+
+ #if 0
+ if(!last_speed_was_sir) speed = self->io.speed;
+ #endif
+
+ if(self->io.speed != speed) smsc_ircc_set_transceiver_for_speed(self, speed);
+
+ self->io.speed = speed;
+
+ if(speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
+ if(!last_speed_was_sir) {
+ smsc_ircc_fir_stop(self);
+ smsc_ircc_sir_start(self);
+ }
+ smsc_ircc_set_sir_speed(self, speed);
+ }
+ else {
+ if(last_speed_was_sir) {
+ #if SMSC_IRCC2_C_SIR_STOP
+ smsc_ircc_sir_stop(self);
+ #endif
+ smsc_ircc_fir_start(self);
+ }
+ smsc_ircc_set_fir_speed(self, speed);
+
+ #if 0
+ self->tx_buff.len = 10;
+ self->tx_buff.data = self->tx_buff.head;
+
+ smsc_ircc_dma_xmit(self, iobase, 4000);
+ #endif
+ /* Be ready for incoming frames */
+ smsc_ircc_dma_receive(self, iobase);
+ }
+
+ netif_wake_queue(dev);
+}
+
+/*
+ * Function smsc_ircc_set_sir_speed (self, speed)
+ *
+ * Set speed of IrDA port to specified baudrate
+ *
+ */
+void smsc_ircc_set_sir_speed(void *priv, __u32 speed)
+{
+ struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv;
+ int iobase;
+ int fcr; /* FIFO control reg */
+ int lcr; /* Line control reg */
+ int divisor;
+
+ IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
+
+ IRDA_ASSERT(self != NULL, return;);
+ iobase = self->io.sir_base;
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ /* Turn off interrupts */
+ outb(0, iobase+UART_IER);
+
+ divisor = SMSC_IRCC2_MAX_SIR_SPEED/speed;
+
+ fcr = UART_FCR_ENABLE_FIFO;
+
+ /*
+ * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
+ * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
+ * about this timeout since it will always be fast enough.
+ */
+ if (self->io.speed < 38400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ fcr |= UART_FCR_TRIGGER_14;
+
+ /* IrDA ports use 8N1 */
+ lcr = UART_LCR_WLEN8;
+
+ outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
+ outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
+ outb(divisor >> 8, iobase+UART_DLM);
+ outb(lcr, iobase+UART_LCR); /* Set 8N1 */
+ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
+
+ /* Turn on interrups */
+ outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, iobase+UART_IER);
+
+ IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
+}
+
+
+/*
+ * Function smsc_ircc_hard_xmit_fir (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct smsc_ircc_cb *self;
+ unsigned long flags;
+ s32 speed;
+ int iobase;
+ int mtt;
+
+ IRDA_ASSERT(dev != NULL, return 0;);
+ self = (struct smsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure test of self->io.speed & speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed after this frame */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ /* Note : you should make sure that speed changes
+ * are not going to corrupt any outgoing frame.
+ * Look at nsc-ircc for the gory details - Jean II */
+ smsc_ircc_change_speed(self, speed);
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ memcpy(self->tx_buff.head, skb->data, skb->len);
+
+ self->tx_buff.len = skb->len;
+ self->tx_buff.data = self->tx_buff.head;
+
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ int bofs;
+
+ /*
+ * Compute how many BOFs (STA or PA's) we need to waste the
+ * min turn time given the speed of the link.
+ */
+ bofs = mtt * (self->io.speed / 1000) / 8000;
+ if (bofs > 4095)
+ bofs = 4095;
+
+ smsc_ircc_dma_xmit(self, iobase, bofs);
+ } else {
+ /* Transmit frame */
+ smsc_ircc_dma_xmit(self, iobase, 0);
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_dma_xmit (self, iobase)
+ *
+ * Transmit data using DMA
+ *
+ */
+static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int iobase, int bofs)
+{
+ u8 ctrl;
+
+ IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+#if 1
+ /* Disable Rx */
+ register_bank(iobase, 0);
+ outb(0x00, iobase+IRCC_LCR_B);
+#endif
+ register_bank(iobase, 1);
+ outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase+IRCC_SCE_CFGB);
+
+ self->io.direction = IO_XMIT;
+
+ /* Set BOF additional count for generating the min turn time */
+ register_bank(iobase, 4);
+ outb(bofs & 0xff, iobase+IRCC_BOF_COUNT_LO);
+ ctrl = inb(iobase+IRCC_CONTROL) & 0xf0;
+ outb(ctrl | ((bofs >> 8) & 0x0f), iobase+IRCC_BOF_COUNT_HI);
+
+ /* Set max Tx frame size */
+ outb(self->tx_buff.len >> 8, iobase+IRCC_TX_SIZE_HI);
+ outb(self->tx_buff.len & 0xff, iobase+IRCC_TX_SIZE_LO);
+
+ /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
+
+ /* Enable burst mode chip Tx DMA */
+ register_bank(iobase, 1);
+ outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
+ IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
+
+ /* Setup DMA controller (must be done after enabling chip DMA) */
+ irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
+ DMA_TX_MODE);
+
+ /* Enable interrupt */
+
+ register_bank(iobase, 0);
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
+
+ /* Enable transmit */
+ outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B);
+}
+
+/*
+ * Function smsc_ircc_dma_xmit_complete (self)
+ *
+ * The transfer of a frame in finished. This function will only be called
+ * by the interrupt handler
+ *
+ */
+static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self, int iobase)
+{
+ IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+#if 0
+ /* Disable Tx */
+ register_bank(iobase, 0);
+ outb(0x00, iobase+IRCC_LCR_B);
+#endif
+ register_bank(self->io.fir_base, 1);
+ outb(inb(self->io.fir_base+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ self->io.fir_base+IRCC_SCE_CFGB);
+
+ /* Check for underrun! */
+ register_bank(iobase, 0);
+ if (inb(iobase+IRCC_LSR) & IRCC_LSR_UNDERRUN) {
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+
+ /* Reset error condition */
+ register_bank(iobase, 0);
+ outb(IRCC_MASTER_ERROR_RESET, iobase+IRCC_MASTER);
+ outb(0x00, iobase+IRCC_MASTER);
+ } else {
+ self->stats.tx_packets++;
+ self->stats.tx_bytes += self->tx_buff.len;
+ }
+
+ /* Check if it's time to change the speed */
+ if (self->new_speed) {
+ smsc_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ netif_wake_queue(self->netdev);
+}
+
+/*
+ * Function smsc_ircc_dma_receive(self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self, int iobase)
+{
+#if 0
+ /* Turn off chip DMA */
+ register_bank(iobase, 1);
+ outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase+IRCC_SCE_CFGB);
+#endif
+
+ /* Disable Tx */
+ register_bank(iobase, 0);
+ outb(0x00, iobase+IRCC_LCR_B);
+
+ /* Turn off chip DMA */
+ register_bank(iobase, 1);
+ outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase+IRCC_SCE_CFGB);
+
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Set max Rx frame size */
+ register_bank(iobase, 4);
+ outb((2050 >> 8) & 0x0f, iobase+IRCC_RX_SIZE_HI);
+ outb(2050 & 0xff, iobase+IRCC_RX_SIZE_LO);
+
+ /* Setup DMA controller */
+ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+ DMA_RX_MODE);
+
+ /* Enable burst mode chip Rx DMA */
+ register_bank(iobase, 1);
+ outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
+ IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
+
+ /* Enable interrupt */
+ register_bank(iobase, 0);
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
+
+
+ /* Enable receiver */
+ register_bank(iobase, 0);
+ outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
+ iobase+IRCC_LCR_B);
+
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_dma_receive_complete(self, iobase)
+ *
+ * Finished with receiving frames
+ *
+ */
+static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self, int iobase)
+{
+ struct sk_buff *skb;
+ int len, msgcnt, lsr;
+
+ register_bank(iobase, 0);
+
+ IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+#if 0
+ /* Disable Rx */
+ register_bank(iobase, 0);
+ outb(0x00, iobase+IRCC_LCR_B);
+#endif
+ register_bank(iobase, 0);
+ outb(inb(iobase+IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase+IRCC_LSAR);
+ lsr= inb(iobase+IRCC_LSR);
+ msgcnt = inb(iobase+IRCC_LCR_B) & 0x08;
+
+ IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
+ get_dma_residue(self->io.dma));
+
+ len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
+
+ /* Look for errors
+ */
+
+ if(lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
+ self->stats.rx_errors++;
+ if(lsr & IRCC_LSR_FRAME_ERROR) self->stats.rx_frame_errors++;
+ if(lsr & IRCC_LSR_CRC_ERROR) self->stats.rx_crc_errors++;
+ if(lsr & IRCC_LSR_SIZE_ERROR) self->stats.rx_length_errors++;
+ if(lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) self->stats.rx_length_errors++;
+ return;
+ }
+ /* Remove CRC */
+ if (self->io.speed < 4000000)
+ len -= 2;
+ else
+ len -= 4;
+
+ if ((len < 2) || (len > 2050)) {
+ IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
+ return;
+ }
+ IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
+
+ skb = dev_alloc_skb(len+1);
+ if (!skb) {
+ IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
+ __FUNCTION__);
+ return;
+ }
+ /* Make sure IP header gets aligned */
+ skb_reserve(skb, 1);
+
+ memcpy(skb_put(skb, len), self->rx_buff.data, len);
+ self->stats.rx_packets++;
+ self->stats.rx_bytes += len;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+}
+
+/*
+ * Function smsc_ircc_sir_receive (self)
+ *
+ * Receive one frame from the infrared port
+ *
+ */
+static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
+{
+ int boguscount = 0;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.sir_base;
+
+ /*
+ * Receive all characters in Rx FIFO, unwrap and unstuff them.
+ * async_unwrap_char will deliver all found frames
+ */
+ do {
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ inb(iobase+UART_RX));
+
+ /* Make sure we don't stay here to long */
+ if (boguscount++ > 32) {
+ IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
+ break;
+ }
+ } while (inb(iobase+UART_LSR) & UART_LSR_DR);
+}
+
+
+/*
+ * Function smsc_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct smsc_ircc_cb *self;
+ int iobase, iir, lcra, lsr;
+ irqreturn_t ret = IRQ_NONE;
+
+ if (dev == NULL) {
+ printk(KERN_WARNING "%s: irq %d for unknown device.\n",
+ driver_name, irq);
+ goto irq_ret;
+ }
+ self = (struct smsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return IRQ_NONE;);
+
+ /* Serialise the interrupt handler in various CPUs, stop Tx path */
+ spin_lock(&self->lock);
+
+ /* Check if we should use the SIR interrupt handler */
+ if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
+ ret = smsc_ircc_interrupt_sir(dev);
+ goto irq_ret_unlock;
+ }
+
+ iobase = self->io.fir_base;
+
+ register_bank(iobase, 0);
+ iir = inb(iobase+IRCC_IIR);
+ if (iir == 0)
+ goto irq_ret_unlock;
+ ret = IRQ_HANDLED;
+
+ /* Disable interrupts */
+ outb(0, iobase+IRCC_IER);
+ lcra = inb(iobase+IRCC_LCR_A);
+ lsr = inb(iobase+IRCC_LSR);
+
+ IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
+
+ if (iir & IRCC_IIR_EOM) {
+ if (self->io.direction == IO_RECV)
+ smsc_ircc_dma_receive_complete(self, iobase);
+ else
+ smsc_ircc_dma_xmit_complete(self, iobase);
+
+ smsc_ircc_dma_receive(self, iobase);
+ }
+
+ if (iir & IRCC_IIR_ACTIVE_FRAME) {
+ /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
+ }
+
+ /* Enable interrupts again */
+
+ register_bank(iobase, 0);
+ outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, iobase+IRCC_IER);
+
+ irq_ret_unlock:
+ spin_unlock(&self->lock);
+ irq_ret:
+ return ret;
+}
+
+/*
+ * Function irport_interrupt_sir (irq, dev_id, regs)
+ *
+ * Interrupt handler for SIR modes
+ */
+static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
+{
+ struct smsc_ircc_cb *self = dev->priv;
+ int boguscount = 0;
+ int iobase;
+ int iir, lsr;
+
+ /* Already locked comming here in smsc_ircc_interrupt() */
+ /*spin_lock(&self->lock);*/
+
+ iobase = self->io.sir_base;
+
+ iir = inb(iobase+UART_IIR) & UART_IIR_ID;
+ if (iir == 0)
+ return IRQ_NONE;
+ while (iir) {
+ /* Clear interrupt */
+ lsr = inb(iobase+UART_LSR);
+
+ IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ __FUNCTION__, iir, lsr, iobase);
+
+ switch (iir) {
+ case UART_IIR_RLSI:
+ IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+ break;
+ case UART_IIR_RDI:
+ /* Receive interrupt */
+ smsc_ircc_sir_receive(self);
+ break;
+ case UART_IIR_THRI:
+ if (lsr & UART_LSR_THRE)
+ /* Transmitter ready for data */
+ smsc_ircc_sir_write_wakeup(self);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
+ __FUNCTION__, iir);
+ break;
+ }
+
+ /* Make sure we don't stay here to long */
+ if (boguscount++ > 100)
+ break;
+
+ iir = inb(iobase + UART_IIR) & UART_IIR_ID;
+ }
+ /*spin_unlock(&self->lock);*/
+ return IRQ_HANDLED;
+}
+
+
+#if 0 /* unused */
+/*
+ * Function ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int ircc_is_receiving(struct smsc_ircc_cb *self)
+{
+ int status = FALSE;
+ /* int iobase; */
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
+ get_dma_residue(self->io.dma));
+
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+
+ return status;
+}
+#endif /* unused */
+
+
+/*
+ * Function smsc_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int smsc_ircc_net_open(struct net_device *dev)
+{
+ struct smsc_ircc_cb *self;
+ int iobase;
+ char hwname[16];
+ unsigned long flags;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct smsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
+ (void *) dev)) {
+ IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
+ __FUNCTION__, self->io.irq);
+ return -EAGAIN;
+ }
+
+ spin_lock_irqsave(&self->lock, flags);
+ /*smsc_ircc_sir_start(self);*/
+ self->io.speed = 0;
+ smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Give self a hardware name */
+ /* It would be cool to offer the chip revision here - Jean II */
+ sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ /*
+ * Always allocate the DMA channel after the IRQ,
+ * and clean up on failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ smsc_ircc_net_close(dev);
+
+ IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
+ __FUNCTION__, self->io.dma);
+ return -EAGAIN;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int smsc_ircc_net_close(struct net_device *dev)
+{
+ struct smsc_ircc_cb *self;
+ int iobase;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct smsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ free_irq(self->io.irq, dev);
+
+ disable_dma(self->io.dma);
+
+ free_dma(self->io.dma);
+
+ return 0;
+}
+
+
+static void smsc_ircc_suspend(struct smsc_ircc_cb *self)
+{
+ IRDA_MESSAGE("%s, Suspending\n", driver_name);
+
+ if (self->io.suspended)
+ return;
+
+ smsc_ircc_net_close(self->netdev);
+
+ self->io.suspended = 1;
+}
+
+static void smsc_ircc_wakeup(struct smsc_ircc_cb *self)
+{
+ if (!self->io.suspended)
+ return;
+
+ /* The code was doing a "cli()" here, but this can't be right.
+ * If you need protection, do it in net_open with a spinlock
+ * or give a good reason. - Jean II */
+
+ smsc_ircc_net_open(self->netdev);
+
+ IRDA_MESSAGE("%s, Waking up\n", driver_name);
+}
+
+static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+ struct smsc_ircc_cb *self = (struct smsc_ircc_cb*) dev->data;
+ if (self) {
+ switch (rqst) {
+ case PM_SUSPEND:
+ smsc_ircc_suspend(self);
+ break;
+ case PM_RESUME:
+ smsc_ircc_wakeup(self);
+ break;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
+{
+ int iobase;
+ unsigned long flags;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ if (self->pmdev)
+ pm_unregister(self->pmdev);
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Make sure the irq handler is not exectuting */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Stop interrupts */
+ register_bank(iobase, 0);
+ outb(0, iobase+IRCC_IER);
+ outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
+ outb(0x00, iobase+IRCC_MASTER);
+#if 0
+ /* Reset to SIR mode */
+ register_bank(iobase, 1);
+ outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase+IRCC_SCE_CFGA);
+ outb(IRCC_CFGB_IR, iobase+IRCC_SCE_CFGB);
+#endif
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Release the PORTS that this driver is using */
+ IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
+ self->io.fir_base);
+
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
+ self->io.sir_base);
+
+ release_region(self->io.sir_base, self->io.sir_ext);
+
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+static void __exit smsc_ircc_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ for (i=0; i < 2; i++) {
+ if (dev_self[i])
+ smsc_ircc_close(dev_self[i]);
+ }
+}
+
+/*
+ * Start SIR operations
+ *
+ * This function *must* be called with spinlock held, because it may
+ * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
+ */
+void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
+{
+ struct net_device *dev;
+ int fir_base, sir_base;
+
+ IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return;);
+ dev= self->netdev;
+ IRDA_ASSERT(dev != NULL, return;);
+ dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
+
+ fir_base = self->io.fir_base;
+ sir_base = self->io.sir_base;
+
+ /* Reset everything */
+ outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER);
+
+ #if SMSC_IRCC2_C_SIR_STOP
+ /*smsc_ircc_sir_stop(self);*/
+ #endif
+
+ register_bank(fir_base, 1);
+ outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base+IRCC_SCE_CFGA);
+
+ /* Initialize UART */
+ outb(UART_LCR_WLEN8, sir_base+UART_LCR); /* Reset DLAB */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base+UART_MCR);
+
+ /* Turn on interrups */
+ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base+UART_IER);
+
+ IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
+
+ outb(0x00, fir_base+IRCC_MASTER);
+}
+
+#if SMSC_IRCC2_C_SIR_STOP
+void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+ iobase = self->io.sir_base;
+
+ /* Reset UART */
+ outb(0, iobase+UART_MCR);
+
+ /* Turn off interrupts */
+ outb(0, iobase+UART_IER);
+}
+#endif
+
+/*
+ * Function smsc_sir_write_wakeup (self)
+ *
+ * Called by the SIR interrupt handler when there's room for more data.
+ * If we have more packets to send, we send them here.
+ *
+ */
+static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
+{
+ int actual = 0;
+ int iobase;
+ int fcr;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ IRDA_DEBUG(4, "%s\n", __FUNCTION__);
+
+ iobase = self->io.sir_base;
+
+ /* Finished with frame? */
+ if (self->tx_buff.len > 0) {
+ /* Write data left in transmit buffer */
+ actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
+ self->tx_buff.data, self->tx_buff.len);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+ } else {
+
+ /*if (self->tx_buff.len ==0) {*/
+
+ /*
+ * Now serial buffer is almost free & we can start
+ * transmission of another packet. But first we must check
+ * if we need to change the speed of the hardware
+ */
+ if (self->new_speed) {
+ IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
+ __FUNCTION__, self->new_speed);
+ smsc_ircc_sir_wait_hw_transmitter_finish(self);
+ smsc_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ } else {
+ /* Tell network layer that we want more frames */
+ netif_wake_queue(self->netdev);
+ }
+ self->stats.tx_packets++;
+
+ if(self->io.speed <= 115200) {
+ /*
+ * Reset Rx FIFO to make sure that all reflected transmit data
+ * is discarded. This is needed for half duplex operation
+ */
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
+ if (self->io.speed < 38400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ fcr |= UART_FCR_TRIGGER_14;
+
+ outb(fcr, iobase+UART_FCR);
+
+ /* Turn on receive interrupts */
+ outb(UART_IER_RDI, iobase+UART_IER);
+ }
+ }
+}
+
+/*
+ * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
+ *
+ * Fill Tx FIFO with transmit data
+ *
+ */
+static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
+{
+ int actual = 0;
+
+ /* Tx FIFO should be empty! */
+ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
+ IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
+ return 0;
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual], iobase+UART_TX);
+ actual++;
+ }
+ return actual;
+}
+
+/*
+ * Function smsc_ircc_is_receiving (self)
+ *
+ * Returns true is we are currently receiving data
+ *
+ */
+static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
+{
+ return (self->rx_buff.state != OUTSIDE_FRAME);
+}
+
+
+/*
+ * Function smsc_ircc_probe_transceiver(self)
+ *
+ * Tries to find the used Transceiver
+ *
+ */
+static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
+{
+ unsigned int i;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ for(i=0; smsc_transceivers[i].name!=NULL; i++)
+ if((*smsc_transceivers[i].probe)(self->io.fir_base)) {
+ IRDA_MESSAGE(" %s transceiver found\n",
+ smsc_transceivers[i].name);
+ self->transceiver= i+1;
+ return;
+ }
+ IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
+ smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
+
+ self->transceiver= SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
+}
+
+
+/*
+ * Function smsc_ircc_set_transceiver_for_speed(self, speed)
+ *
+ * Set the transceiver according to the speed
+ *
+ */
+static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
+{
+ unsigned int trx;
+
+ trx = self->transceiver;
+ if(trx>0) (*smsc_transceivers[trx-1].set_for_speed)(self->io.fir_base, speed);
+}
+
+/*
+ * Function smsc_ircc_wait_hw_transmitter_finish ()
+ *
+ * Wait for the real end of HW transmission
+ *
+ * The UART is a strict FIFO, and we get called only when we have finished
+ * pushing data to the FIFO, so the maximum amount of time we must wait
+ * is only for the FIFO to drain out.
+ *
+ * We use a simple calibrated loop. We may need to adjust the loop
+ * delay (udelay) to balance I/O traffic and latency. And we also need to
+ * adjust the maximum timeout.
+ * It would probably be better to wait for the proper interrupt,
+ * but it doesn't seem to be available.
+ *
+ * We can't use jiffies or kernel timers because :
+ * 1) We are called from the interrupt handler, which disable softirqs,
+ * so jiffies won't be increased
+ * 2) Jiffies granularity is usually very coarse (10ms), and we don't
+ * want to wait that long to detect stuck hardware.
+ * Jean II
+ */
+
+static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
+{
+ int iobase;
+ int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
+
+ iobase = self->io.sir_base;
+
+ /* Calibrated busy loop */
+ while((count-- > 0) && !(inb(iobase+UART_LSR) & UART_LSR_TEMT))
+ udelay(1);
+
+ if(count == 0)
+ IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
+}
+
+
+/* PROBING
+ *
+ *
+ */
+
+static int __init smsc_ircc_look_for_chips(void)
+{
+ smsc_chip_address_t *address;
+ char *type;
+ unsigned int cfg_base, found;
+
+ found = 0;
+ address = possible_addresses;
+
+ while(address->cfg_base){
+ cfg_base = address->cfg_base;
+
+ /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
+
+ if( address->type & SMSCSIO_TYPE_FDC){
+ type = "FDC";
+ if((address->type) & SMSCSIO_TYPE_FLAT) {
+ if(!smsc_superio_flat(fdc_chips_flat,cfg_base, type)) found++;
+ }
+ if((address->type) & SMSCSIO_TYPE_PAGED) {
+ if(!smsc_superio_paged(fdc_chips_paged,cfg_base, type)) found++;
+ }
+ }
+ if( address->type & SMSCSIO_TYPE_LPC){
+ type = "LPC";
+ if((address->type) & SMSCSIO_TYPE_FLAT) {
+ if(!smsc_superio_flat(lpc_chips_flat,cfg_base,type)) found++;
+ }
+ if((address->type) & SMSCSIO_TYPE_PAGED) {
+ if(!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC")) found++;
+ }
+ }
+ address++;
+ }
+ return found;
+}
+
+/*
+ * Function smsc_superio_flat (chip, base, type)
+ *
+ * Try to get configuration of a smc SuperIO chip with flat register model
+ *
+ */
+static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfgbase, char *type)
+{
+ unsigned short firbase, sirbase;
+ u8 mode, dma, irq;
+ int ret = -ENODEV;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type)==NULL)
+ return ret;
+
+ outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
+ mode = inb(cfgbase+1);
+
+ /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
+
+ if(!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
+ IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
+
+ outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
+ sirbase = inb(cfgbase+1) << 2;
+
+ /* FIR iobase */
+ outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
+ firbase = inb(cfgbase+1) << 3;
+
+ /* DMA */
+ outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
+ dma = inb(cfgbase+1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
+
+ /* IRQ */
+ outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
+ irq = inb(cfgbase+1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
+
+ IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
+
+ if (firbase) {
+ if (smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
+ ret=0;
+ }
+
+ /* Exit configuration */
+ outb(SMSCSIO_CFGEXITKEY, cfgbase);
+
+ return ret;
+}
+
+/*
+ * Function smsc_superio_paged (chip, base, type)
+ *
+ * Try to get configuration of a smc SuperIO chip with paged register model
+ *
+ */
+static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cfg_base, char *type)
+{
+ unsigned short fir_io, sir_io;
+ int ret = -ENODEV;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ if (smsc_ircc_probe(cfg_base,0x20,chips,type)==NULL)
+ return ret;
+
+ /* Select logical device (UART2) */
+ outb(0x07, cfg_base);
+ outb(0x05, cfg_base + 1);
+
+ /* SIR iobase */
+ outb(0x60, cfg_base);
+ sir_io = inb(cfg_base + 1) << 8;
+ outb(0x61, cfg_base);
+ sir_io |= inb(cfg_base + 1);
+
+ /* Read FIR base */
+ outb(0x62, cfg_base);
+ fir_io = inb(cfg_base + 1) << 8;
+ outb(0x63, cfg_base);
+ fir_io |= inb(cfg_base + 1);
+ outb(0x2b, cfg_base); /* ??? */
+
+ if (fir_io) {
+ if (smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
+ ret=0;
+ }
+
+ /* Exit configuration */
+ outb(SMSCSIO_CFGEXITKEY, cfg_base);
+
+ return ret;
+}
+
+
+static int __init smsc_access(unsigned short cfg_base,unsigned char reg)
+{
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ outb(reg, cfg_base);
+
+ if (inb(cfg_base)!=reg)
+ return -1;
+
+ return 0;
+}
+
+static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type)
+{
+ u8 devid,xdevid,rev;
+
+ IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+
+ /* Leave configuration */
+
+ outb(SMSCSIO_CFGEXITKEY, cfg_base);
+
+ if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */
+ return NULL;
+
+ outb(reg, cfg_base);
+
+ xdevid=inb(cfg_base+1);
+
+ /* Enter configuration */
+
+ outb(SMSCSIO_CFGACCESSKEY, cfg_base);
+
+ #if 0
+ if (smsc_access(cfg_base,0x55)) /* send second key and check */
+ return NULL;
+ #endif
+
+ /* probe device ID */
+
+ if (smsc_access(cfg_base,reg))
+ return NULL;
+
+ devid=inb(cfg_base+1);
+
+ if (devid==0) /* typical value for unused port */
+ return NULL;
+
+ if (devid==0xff) /* typical value for unused port */
+ return NULL;
+
+ /* probe revision ID */
+
+ if (smsc_access(cfg_base,reg+1))
+ return NULL;
+
+ rev=inb(cfg_base+1);
+
+ if (rev>=128) /* i think this will make no sense */
+ return NULL;
+
+ if (devid==xdevid) /* protection against false positives */
+ return NULL;
+
+ /* Check for expected device ID; are there others? */
+
+ while(chip->devid!=devid) {
+
+ chip++;
+
+ if (chip->name==NULL)
+ return NULL;
+ }
+
+ IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",devid,rev,cfg_base,type,chip->name);
+
+ if (chip->rev>rev){
+ IRDA_MESSAGE("Revision higher than expected\n");
+ return NULL;
+ }
+
+ if (chip->flags&NoIRDA)
+ IRDA_MESSAGE("chipset does not support IRDA\n");
+
+ return chip;
+}
+
+static int __init smsc_superio_fdc(unsigned short cfg_base)
+{
+ int ret = -1;
+
+ if (!request_region(cfg_base, 2, driver_name)) {
+ IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
+ __FUNCTION__, cfg_base);
+ } else {
+ if (!smsc_superio_flat(fdc_chips_flat,cfg_base,"FDC")
+ ||!smsc_superio_paged(fdc_chips_paged,cfg_base,"FDC"))
+ ret = 0;
+
+ release_region(cfg_base, 2);
+ }
+
+ return ret;
+}
+
+static int __init smsc_superio_lpc(unsigned short cfg_base)
+{
+ int ret = -1;
+
+ if (!request_region(cfg_base, 2, driver_name)) {
+ IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
+ __FUNCTION__, cfg_base);
+ } else {
+ if (!smsc_superio_flat(lpc_chips_flat,cfg_base,"LPC")
+ ||!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC"))
+ ret = 0;
+ release_region(cfg_base, 2);
+ }
+ return ret;
+}
+
+/************************************************
+ *
+ * Transceivers specific functions
+ *
+ ************************************************/
+
+
+/*
+ * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
+ *
+ * Program transceiver through smsc-ircc ATC circuitry
+ *
+ */
+
+static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
+{
+ unsigned long jiffies_now, jiffies_timeout;
+ u8 val;
+
+ jiffies_now= jiffies;
+ jiffies_timeout= jiffies+SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
+
+ /* ATC */
+ register_bank(fir_base, 4);
+ outb((inb(fir_base+IRCC_ATC) & IRCC_ATC_MASK) |IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, fir_base+IRCC_ATC);
+ while((val=(inb(fir_base+IRCC_ATC) & IRCC_ATC_nPROGREADY)) && !time_after(jiffies, jiffies_timeout));
+ if(val)
+ IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
+ inb(fir_base+IRCC_ATC));
+}
+
+/*
+ * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
+ *
+ * Probe transceiver smsc-ircc ATC circuitry
+ *
+ */
+
+static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
+{
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
+ *
+ * Set transceiver
+ *
+ */
+
+static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
+{
+ u8 fast_mode;
+
+ switch(speed)
+ {
+ default:
+ case 576000 :
+ fast_mode = 0;
+ break;
+ case 1152000 :
+ case 4000000 :
+ fast_mode = IRCC_LCR_A_FAST;
+ break;
+
+ }
+ register_bank(fir_base, 0);
+ outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A);
+}
+
+/*
+ * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
+ *
+ * Probe transceiver
+ *
+ */
+
+static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
+{
+ return 0;
+}
+
+/*
+ * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
+ *
+ * Set transceiver
+ *
+ */
+
+static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
+{
+ u8 fast_mode;
+
+ switch(speed)
+ {
+ default:
+ case 576000 :
+ fast_mode = 0;
+ break;
+ case 1152000 :
+ case 4000000 :
+ fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
+ break;
+
+ }
+ /* This causes an interrupt */
+ register_bank(fir_base, 0);
+ outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A);
+}
+
+/*
+ * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
+ *
+ * Probe transceiver
+ *
+ */
+
+static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
+{
+ return 0;
+}
+
+
+module_init(smsc_ircc_init);
+module_exit(smsc_ircc_cleanup);
+
+MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
+MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
+MODULE_LICENSE("GPL");
+
+module_param(ircc_dma, int, 0);
+MODULE_PARM_DESC(ircc_dma, "DMA channel");
+module_param(ircc_irq, int, 0);
+MODULE_PARM_DESC(ircc_irq, "IRQ line");
+module_param(ircc_fir, int, 0);
+MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
+module_param(ircc_sir, int, 0);
+MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
+module_param(ircc_cfg, int, 0);
+MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
+module_param(ircc_transceiver, int, 0);
+MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h
new file mode 100644
index 000000000000..458611cc0d40
--- /dev/null
+++ b/drivers/net/irda/smsc-ircc2.h
@@ -0,0 +1,194 @@
+/*********************************************************************
+ * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $
+ *
+ * Description: Definitions for the SMC IrCC chipset
+ * Status: Experimental.
+ * Author: Daniele Peri (peri@csai.unipa.it)
+ *
+ * Copyright (c) 2002 Daniele Peri
+ * All Rights Reserved.
+ *
+ * Based on smc-ircc.h:
+ *
+ * Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net>
+ * All Rights Reserved
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#ifndef SMSC_IRCC2_H
+#define SMSC_IRCC2_H
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+/* Master Control Register */
+#define IRCC_MASTER 0x07
+#define IRCC_MASTER_POWERDOWN 0x80
+#define IRCC_MASTER_RESET 0x40
+#define IRCC_MASTER_INT_EN 0x20
+#define IRCC_MASTER_ERROR_RESET 0x10
+
+/* Register block 0 */
+
+/* Interrupt Identification */
+#define IRCC_IIR 0x01
+#define IRCC_IIR_ACTIVE_FRAME 0x80
+#define IRCC_IIR_EOM 0x40
+#define IRCC_IIR_RAW_MODE 0x20
+#define IRCC_IIR_FIFO 0x10
+
+/* Interrupt Enable */
+#define IRCC_IER 0x02
+#define IRCC_IER_ACTIVE_FRAME 0x80
+#define IRCC_IER_EOM 0x40
+#define IRCC_IER_RAW_MODE 0x20
+#define IRCC_IER_FIFO 0x10
+
+/* Line Status Register */
+#define IRCC_LSR 0x03
+#define IRCC_LSR_UNDERRUN 0x80
+#define IRCC_LSR_OVERRUN 0x40
+#define IRCC_LSR_FRAME_ERROR 0x20
+#define IRCC_LSR_SIZE_ERROR 0x10
+#define IRCC_LSR_CRC_ERROR 0x80
+#define IRCC_LSR_FRAME_ABORT 0x40
+
+/* Line Status Address Register */
+#define IRCC_LSAR 0x03
+#define IRCC_LSAR_ADDRESS_MASK 0x07
+
+/* Line Control Register A */
+#define IRCC_LCR_A 0x04
+#define IRCC_LCR_A_FIFO_RESET 0x80
+#define IRCC_LCR_A_FAST 0x40
+#define IRCC_LCR_A_GP_DATA 0x20
+#define IRCC_LCR_A_RAW_TX 0x10
+#define IRCC_LCR_A_RAW_RX 0x08
+#define IRCC_LCR_A_ABORT 0x04
+#define IRCC_LCR_A_DATA_DONE 0x02
+
+/* Line Control Register B */
+#define IRCC_LCR_B 0x05
+#define IRCC_LCR_B_SCE_DISABLED 0x00
+#define IRCC_LCR_B_SCE_TRANSMIT 0x40
+#define IRCC_LCR_B_SCE_RECEIVE 0x80
+#define IRCC_LCR_B_SCE_UNDEFINED 0xc0
+#define IRCC_LCR_B_SIP_ENABLE 0x20
+#define IRCC_LCR_B_BRICK_WALL 0x10
+
+/* Bus Status Register */
+#define IRCC_BSR 0x06
+#define IRCC_BSR_NOT_EMPTY 0x80
+#define IRCC_BSR_FIFO_FULL 0x40
+#define IRCC_BSR_TIMEOUT 0x20
+
+/* Register block 1 */
+
+#define IRCC_FIFO_THRESHOLD 0x02
+
+#define IRCC_SCE_CFGA 0x00
+#define IRCC_CFGA_AUX_IR 0x80
+#define IRCC_CFGA_HALF_DUPLEX 0x04
+#define IRCC_CFGA_TX_POLARITY 0x02
+#define IRCC_CFGA_RX_POLARITY 0x01
+
+#define IRCC_CFGA_COM 0x00
+#define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87
+#define IRCC_CFGA_IRDA_SIR_A 0x08
+#define IRCC_CFGA_ASK_SIR 0x10
+#define IRCC_CFGA_IRDA_SIR_B 0x18
+#define IRCC_CFGA_IRDA_HDLC 0x20
+#define IRCC_CFGA_IRDA_4PPM 0x28
+#define IRCC_CFGA_CONSUMER 0x30
+#define IRCC_CFGA_RAW_IR 0x38
+#define IRCC_CFGA_OTHER 0x40
+
+#define IRCC_IR_HDLC 0x04
+#define IRCC_IR_4PPM 0x01
+#define IRCC_IR_CONSUMER 0x02
+
+#define IRCC_SCE_CFGB 0x01
+#define IRCC_CFGB_LOOPBACK 0x20
+#define IRCC_CFGB_LPBCK_TX_CRC 0x10
+#define IRCC_CFGB_NOWAIT 0x08
+#define IRCC_CFGB_STRING_MOVE 0x04
+#define IRCC_CFGB_DMA_BURST 0x02
+#define IRCC_CFGB_DMA_ENABLE 0x01
+
+#define IRCC_CFGB_MUX_COM 0x00
+#define IRCC_CFGB_MUX_IR 0x40
+#define IRCC_CFGB_MUX_AUX 0x80
+#define IRCC_CFGB_MUX_INACTIVE 0xc0
+
+/* Register block 3 - Identification Registers! */
+#define IRCC_ID_HIGH 0x00 /* 0x10 */
+#define IRCC_ID_LOW 0x01 /* 0xB8 */
+#define IRCC_CHIP_ID 0x02 /* 0xF1 */
+#define IRCC_VERSION 0x03 /* 0x01 */
+#define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */
+#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */
+#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */
+
+/* Register block 4 - IrDA */
+#define IRCC_CONTROL 0x00
+#define IRCC_BOF_COUNT_LO 0x01 /* Low byte */
+#define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */
+#define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */
+#define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */
+#define IRCC_TX_SIZE_LO 0x04 /* Low byte */
+#define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_LO 0x06 /* Low byte */
+
+#define IRCC_1152 0x80
+#define IRCC_CRC 0x40
+
+/* Register block 5 - IrDA */
+#define IRCC_ATC 0x00
+#define IRCC_ATC_nPROGREADY 0x80
+#define IRCC_ATC_SPEED 0x40
+#define IRCC_ATC_ENABLE 0x20
+#define IRCC_ATC_MASK 0xE0
+
+
+#define IRCC_IRHALFDUPLEX_TIMEOUT 0x01
+
+#define IRCC_SCE_TX_DELAY_TIMER 0x02
+
+/*
+ * Other definitions
+ */
+
+#define SMSC_IRCC2_MAX_SIR_SPEED 115200
+#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8
+#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8
+#define SMSC_IRCC2_FIFO_SIZE 16
+#define SMSC_IRCC2_FIFO_THRESHOLD 64
+/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+#define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384
+#define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384
+#define SMSC_IRCC2_MIN_TURN_TIME 0x07
+#define SMSC_IRCC2_WINDOW_SIZE 0x07
+/* Maximum wait for hw transmitter to finish */
+#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */
+/* Maximum wait for ATC transceiver programming to finish */
+#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
+#endif /* SMSC_IRCC2_H */
diff --git a/drivers/net/irda/smsc-sio.h b/drivers/net/irda/smsc-sio.h
new file mode 100644
index 000000000000..59e20e653ebe
--- /dev/null
+++ b/drivers/net/irda/smsc-sio.h
@@ -0,0 +1,100 @@
+#ifndef SMSC_SIO_H
+#define SMSC_SIO_H
+
+/******************************************
+ Keys. They should work with every SMsC SIO
+ ******************************************/
+
+#define SMSCSIO_CFGACCESSKEY 0x55
+#define SMSCSIO_CFGEXITKEY 0xaa
+
+/*****************************
+ * Generic SIO Flat (!?) *
+ *****************************/
+
+/* Register 0x0d */
+#define SMSCSIOFLAT_DEVICEID_REG 0x0d
+
+/* Register 0x0c */
+#define SMSCSIOFLAT_UARTMODE0C_REG 0x0c
+#define SMSCSIOFLAT_UART2MODE_MASK 0x38
+#define SMSCSIOFLAT_UART2MODE_VAL_COM 0x00
+#define SMSCSIOFLAT_UART2MODE_VAL_IRDA 0x08
+#define SMSCSIOFLAT_UART2MODE_VAL_ASKIR 0x10
+
+/* Register 0x25 */
+#define SMSCSIOFLAT_UART2BASEADDR_REG 0x25
+
+/* Register 0x2b */
+#define SMSCSIOFLAT_FIRBASEADDR_REG 0x2b
+
+/* Register 0x2c */
+#define SMSCSIOFLAT_FIRDMASELECT_REG 0x2c
+#define SMSCSIOFLAT_FIRDMASELECT_MASK 0x0f
+
+/* Register 0x28 */
+#define SMSCSIOFLAT_UARTIRQSELECT_REG 0x28
+#define SMSCSIOFLAT_UART2IRQSELECT_MASK 0x0f
+#define SMSCSIOFLAT_UART1IRQSELECT_MASK 0xf0
+#define SMSCSIOFLAT_UARTIRQSELECT_VAL_NONE 0x00
+
+
+/*********************
+ * LPC47N227 *
+ *********************/
+
+#define LPC47N227_CFGACCESSKEY 0x55
+#define LPC47N227_CFGEXITKEY 0xaa
+
+/* Register 0x00 */
+#define LPC47N227_FDCPOWERVALIDCONF_REG 0x00
+#define LPC47N227_FDCPOWER_MASK 0x08
+#define LPC47N227_VALID_MASK 0x80
+
+/* Register 0x02 */
+#define LPC47N227_UART12POWER_REG 0x02
+#define LPC47N227_UART1POWERDOWN_MASK 0x08
+#define LPC47N227_UART2POWERDOWN_MASK 0x80
+
+/* Register 0x07 */
+#define LPC47N227_APMBOOTDRIVE_REG 0x07
+#define LPC47N227_PARPORT2AUTOPWRDOWN_MASK 0x10 /* auto power down on if set */
+#define LPC47N227_UART2AUTOPWRDOWN_MASK 0x20 /* auto power down on if set */
+#define LPC47N227_UART1AUTOPWRDOWN_MASK 0x40 /* auto power down on if set */
+
+/* Register 0x0c */
+#define LPC47N227_UARTMODE0C_REG 0x0c
+#define LPC47N227_UART2MODE_MASK 0x38
+#define LPC47N227_UART2MODE_VAL_COM 0x00
+#define LPC47N227_UART2MODE_VAL_IRDA 0x08
+#define LPC47N227_UART2MODE_VAL_ASKIR 0x10
+
+/* Register 0x0d */
+#define LPC47N227_DEVICEID_REG 0x0d
+#define LPC47N227_DEVICEID_DEFVAL 0x5a
+
+/* Register 0x0e */
+#define LPC47N227_REVISIONID_REG 0x0e
+
+/* Register 0x25 */
+#define LPC47N227_UART2BASEADDR_REG 0x25
+
+/* Register 0x28 */
+#define LPC47N227_UARTIRQSELECT_REG 0x28
+#define LPC47N227_UART2IRQSELECT_MASK 0x0f
+#define LPC47N227_UART1IRQSELECT_MASK 0xf0
+#define LPC47N227_UARTIRQSELECT_VAL_NONE 0x00
+
+/* Register 0x2b */
+#define LPC47N227_FIRBASEADDR_REG 0x2b
+
+/* Register 0x2c */
+#define LPC47N227_FIRDMASELECT_REG 0x2c
+#define LPC47N227_FIRDMASELECT_MASK 0x0f
+#define LPC47N227_FIRDMASELECT_VAL_DMA1 0x01 /* 47n227 has three dma channels */
+#define LPC47N227_FIRDMASELECT_VAL_DMA2 0x02
+#define LPC47N227_FIRDMASELECT_VAL_DMA3 0x03
+#define LPC47N227_FIRDMASELECT_VAL_NONE 0x0f
+
+
+#endif
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
new file mode 100644
index 000000000000..83c605e8824c
--- /dev/null
+++ b/drivers/net/irda/stir4200.c
@@ -0,0 +1,1184 @@
+/*****************************************************************************
+*
+* Filename: stir4200.c
+* Version: 0.4
+* Description: Irda SigmaTel USB Dongle
+* Status: Experimental
+* Author: Stephen Hemminger <shemminger@osdl.org>
+*
+* Based on earlier driver by Paul Stewart <stewart@parc.com>
+*
+* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+* Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+* Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * This dongle does no framing, and requires polling to receive the
+ * data. The STIr4200 has bulk in and out endpoints just like
+ * usr-irda devices, but the data it sends and receives is raw; like
+ * irtty, it needs to call the wrap and unwrap functions to add and
+ * remove SOF/BOF and escape characters to/from the frame.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200");
+MODULE_LICENSE("GPL");
+
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+
+static int rx_sensitivity = 1; /* FIR 0..4, SIR 0..6 */
+module_param(rx_sensitivity, int, 0);
+MODULE_PARM_DESC(rx_sensitivity, "Set Receiver sensitivity (0-6, 0 is most sensitive)");
+
+static int tx_power = 0; /* 0 = highest ... 3 = lowest */
+module_param(tx_power, int, 0);
+MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)");
+
+#define STIR_IRDA_HEADER 4
+#define CTRL_TIMEOUT 100 /* milliseconds */
+#define TRANSMIT_TIMEOUT 200 /* milliseconds */
+#define STIR_FIFO_SIZE 4096
+#define FIFO_REGS_SIZE 3
+
+enum FirChars {
+ FIR_CE = 0x7d,
+ FIR_XBOF = 0x7f,
+ FIR_EOF = 0x7e,
+};
+
+enum StirRequests {
+ REQ_WRITE_REG = 0x00,
+ REQ_READ_REG = 0x01,
+ REQ_READ_ROM = 0x02,
+ REQ_WRITE_SINGLE = 0x03,
+};
+
+/* Register offsets */
+enum StirRegs {
+ REG_RSVD=0,
+ REG_MODE,
+ REG_PDCLK,
+ REG_CTRL1,
+ REG_CTRL2,
+ REG_FIFOCTL,
+ REG_FIFOLSB,
+ REG_FIFOMSB,
+ REG_DPLL,
+ REG_IRDIG,
+ REG_TEST=15,
+};
+
+enum StirModeMask {
+ MODE_FIR = 0x80,
+ MODE_SIR = 0x20,
+ MODE_ASK = 0x10,
+ MODE_FASTRX = 0x08,
+ MODE_FFRSTEN = 0x04,
+ MODE_NRESET = 0x02,
+ MODE_2400 = 0x01,
+};
+
+enum StirPdclkMask {
+ PDCLK_4000000 = 0x02,
+ PDCLK_115200 = 0x09,
+ PDCLK_57600 = 0x13,
+ PDCLK_38400 = 0x1D,
+ PDCLK_19200 = 0x3B,
+ PDCLK_9600 = 0x77,
+ PDCLK_2400 = 0xDF,
+};
+
+enum StirCtrl1Mask {
+ CTRL1_SDMODE = 0x80,
+ CTRL1_RXSLOW = 0x40,
+ CTRL1_TXPWD = 0x10,
+ CTRL1_RXPWD = 0x08,
+ CTRL1_SRESET = 0x01,
+};
+
+enum StirCtrl2Mask {
+ CTRL2_SPWIDTH = 0x08,
+ CTRL2_REVID = 0x03,
+};
+
+enum StirFifoCtlMask {
+ FIFOCTL_EOF = 0x80,
+ FIFOCTL_UNDER = 0x40,
+ FIFOCTL_OVER = 0x20,
+ FIFOCTL_DIR = 0x10,
+ FIFOCTL_CLR = 0x08,
+ FIFOCTL_EMPTY = 0x04,
+ FIFOCTL_RXERR = 0x02,
+ FIFOCTL_TXERR = 0x01,
+};
+
+enum StirDiagMask {
+ IRDIG_RXHIGH = 0x80,
+ IRDIG_RXLOW = 0x40,
+};
+
+enum StirTestMask {
+ TEST_PLLDOWN = 0x80,
+ TEST_LOOPIR = 0x40,
+ TEST_LOOPUSB = 0x20,
+ TEST_TSTENA = 0x10,
+ TEST_TSTOSC = 0x0F,
+};
+
+struct stir_cb {
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct net_device *netdev; /* network layer */
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct net_device_stats stats; /* network statistics */
+ struct qos_info qos;
+ unsigned speed; /* Current speed */
+
+ wait_queue_head_t thr_wait; /* transmit thread wakeup */
+ struct completion thr_exited;
+ pid_t thr_pid;
+
+ struct sk_buff *tx_pending;
+ void *io_buf; /* transmit/receive buffer */
+ __u8 *fifo_status;
+
+ iobuff_t rx_buff; /* receive unwrap state machine */
+ struct timeval rx_time;
+ int receiving;
+ struct urb *rx_urb;
+};
+
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+ /* SigmaTel, Inc, STIr4200 IrDA/USB Bridge */
+ { USB_DEVICE(0x066f, 0x4200) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+/* Send control message to set dongle register */
+static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value)
+{
+ struct usb_device *dev = stir->usbdev;
+
+ pr_debug("%s: write reg %d = 0x%x\n",
+ stir->netdev->name, reg, value);
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ REQ_WRITE_SINGLE,
+ USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
+ value, reg, NULL, 0,
+ CTRL_TIMEOUT);
+}
+
+/* Send control message to read multiple registers */
+static inline int read_reg(struct stir_cb *stir, __u16 reg,
+ __u8 *data, __u16 count)
+{
+ struct usb_device *dev = stir->usbdev;
+
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ REQ_READ_REG,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, reg, data, count,
+ CTRL_TIMEOUT);
+}
+
+static inline int isfir(u32 speed)
+{
+ return (speed == 4000000);
+}
+
+/*
+ * Prepare a FIR IrDA frame for transmission to the USB dongle. The
+ * FIR transmit frame is documented in the datasheet. It consists of
+ * a two byte 0x55 0xAA sequence, two little-endian length bytes, a
+ * sequence of exactly 16 XBOF bytes of 0x7E, two BOF bytes of 0x7E,
+ * then the data escaped as follows:
+ *
+ * 0x7D -> 0x7D 0x5D
+ * 0x7E -> 0x7D 0x5E
+ * 0x7F -> 0x7D 0x5F
+ *
+ * Then, 4 bytes of little endian (stuffed) FCS follow, then two
+ * trailing EOF bytes of 0x7E.
+ */
+static inline __u8 *stuff_fir(__u8 *p, __u8 c)
+{
+ switch(c) {
+ case 0x7d:
+ case 0x7e:
+ case 0x7f:
+ *p++ = 0x7d;
+ c ^= IRDA_TRANS;
+ /* fall through */
+ default:
+ *p++ = c;
+ }
+ return p;
+}
+
+/* Take raw data in skb and put it wrapped into buf */
+static unsigned wrap_fir_skb(const struct sk_buff *skb, __u8 *buf)
+{
+ __u8 *ptr = buf;
+ __u32 fcs = ~(crc32_le(~0, skb->data, skb->len));
+ __u16 wraplen;
+ int i;
+
+ /* Header */
+ buf[0] = 0x55;
+ buf[1] = 0xAA;
+
+ ptr = buf + STIR_IRDA_HEADER;
+ memset(ptr, 0x7f, 16);
+ ptr += 16;
+
+ /* BOF */
+ *ptr++ = 0x7e;
+ *ptr++ = 0x7e;
+
+ /* Address / Control / Information */
+ for (i = 0; i < skb->len; i++)
+ ptr = stuff_fir(ptr, skb->data[i]);
+
+ /* FCS */
+ ptr = stuff_fir(ptr, fcs & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 8) & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 16) & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 24) & 0xff);
+
+ /* EOFs */
+ *ptr++ = 0x7e;
+ *ptr++ = 0x7e;
+
+ /* Total length, minus the header */
+ wraplen = (ptr - buf) - STIR_IRDA_HEADER;
+ buf[2] = wraplen & 0xff;
+ buf[3] = (wraplen >> 8) & 0xff;
+
+ return wraplen + STIR_IRDA_HEADER;
+}
+
+static unsigned wrap_sir_skb(struct sk_buff *skb, __u8 *buf)
+{
+ __u16 wraplen;
+
+ wraplen = async_wrap_skb(skb, buf + STIR_IRDA_HEADER,
+ STIR_FIFO_SIZE - STIR_IRDA_HEADER);
+ buf[0] = 0x55;
+ buf[1] = 0xAA;
+ buf[2] = wraplen & 0xff;
+ buf[3] = (wraplen >> 8) & 0xff;
+
+ return wraplen + STIR_IRDA_HEADER;
+}
+
+/*
+ * Frame is fully formed in the rx_buff so check crc
+ * and pass up to irlap
+ * setup for next receive
+ */
+static void fir_eof(struct stir_cb *stir)
+{
+ iobuff_t *rx_buff = &stir->rx_buff;
+ int len = rx_buff->len - 4;
+ struct sk_buff *skb, *nskb;
+ __u32 fcs;
+
+ if (unlikely(len <= 0)) {
+ pr_debug("%s: short frame len %d\n",
+ stir->netdev->name, len);
+
+ ++stir->stats.rx_errors;
+ ++stir->stats.rx_length_errors;
+ return;
+ }
+
+ fcs = ~(crc32_le(~0, rx_buff->data, len));
+ if (fcs != le32_to_cpu(get_unaligned((u32 *)(rx_buff->data+len)))) {
+ pr_debug("crc error calc 0x%x len %d\n", fcs, len);
+ stir->stats.rx_errors++;
+ stir->stats.rx_crc_errors++;
+ return;
+ }
+
+ /* if frame is short then just copy it */
+ if (len < IRDA_RX_COPY_THRESHOLD) {
+ nskb = dev_alloc_skb(len + 1);
+ if (unlikely(!nskb)) {
+ ++stir->stats.rx_dropped;
+ return;
+ }
+ skb_reserve(nskb, 1);
+ skb = nskb;
+ memcpy(nskb->data, rx_buff->data, len);
+ } else {
+ nskb = dev_alloc_skb(rx_buff->truesize);
+ if (unlikely(!nskb)) {
+ ++stir->stats.rx_dropped;
+ return;
+ }
+ skb_reserve(nskb, 1);
+ skb = rx_buff->skb;
+ rx_buff->skb = nskb;
+ rx_buff->head = nskb->data;
+ }
+
+ skb_put(skb, len);
+
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ skb->dev = stir->netdev;
+
+ netif_rx(skb);
+
+ stir->stats.rx_packets++;
+ stir->stats.rx_bytes += len;
+
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+}
+
+/* Unwrap FIR stuffed data and bump it to IrLAP */
+static void stir_fir_chars(struct stir_cb *stir,
+ const __u8 *bytes, int len)
+{
+ iobuff_t *rx_buff = &stir->rx_buff;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ __u8 byte = bytes[i];
+
+ switch(rx_buff->state) {
+ case OUTSIDE_FRAME:
+ /* ignore garbage till start of frame */
+ if (unlikely(byte != FIR_EOF))
+ continue;
+ /* Now receiving frame */
+ rx_buff->state = BEGIN_FRAME;
+
+ /* Time to initialize receive buffer */
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+ continue;
+
+ case LINK_ESCAPE:
+ if (byte == FIR_EOF) {
+ pr_debug("%s: got EOF after escape\n",
+ stir->netdev->name);
+ goto frame_error;
+ }
+ rx_buff->state = INSIDE_FRAME;
+ byte ^= IRDA_TRANS;
+ break;
+
+ case BEGIN_FRAME:
+ /* ignore multiple BOF/EOF */
+ if (byte == FIR_EOF)
+ continue;
+ rx_buff->state = INSIDE_FRAME;
+ rx_buff->in_frame = TRUE;
+
+ /* fall through */
+ case INSIDE_FRAME:
+ switch(byte) {
+ case FIR_CE:
+ rx_buff->state = LINK_ESCAPE;
+ continue;
+ case FIR_XBOF:
+ /* 0x7f is not used in this framing */
+ pr_debug("%s: got XBOF without escape\n",
+ stir->netdev->name);
+ goto frame_error;
+ case FIR_EOF:
+ rx_buff->state = OUTSIDE_FRAME;
+ rx_buff->in_frame = FALSE;
+ fir_eof(stir);
+ continue;
+ }
+ break;
+ }
+
+ /* add byte to rx buffer */
+ if (unlikely(rx_buff->len >= rx_buff->truesize)) {
+ pr_debug("%s: fir frame exceeds %d\n",
+ stir->netdev->name, rx_buff->truesize);
+ ++stir->stats.rx_over_errors;
+ goto error_recovery;
+ }
+
+ rx_buff->data[rx_buff->len++] = byte;
+ continue;
+
+ frame_error:
+ ++stir->stats.rx_frame_errors;
+
+ error_recovery:
+ ++stir->stats.rx_errors;
+ rx_buff->state = OUTSIDE_FRAME;
+ rx_buff->in_frame = FALSE;
+ }
+}
+
+/* Unwrap SIR stuffed data and bump it up to IrLAP */
+static void stir_sir_chars(struct stir_cb *stir,
+ const __u8 *bytes, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ async_unwrap_char(stir->netdev, &stir->stats,
+ &stir->rx_buff, bytes[i]);
+}
+
+static inline void unwrap_chars(struct stir_cb *stir,
+ const __u8 *bytes, int length)
+{
+ if (isfir(stir->speed))
+ stir_fir_chars(stir, bytes, length);
+ else
+ stir_sir_chars(stir, bytes, length);
+}
+
+/* Mode parameters for each speed */
+static const struct {
+ unsigned speed;
+ __u8 pdclk;
+} stir_modes[] = {
+ { 2400, PDCLK_2400 },
+ { 9600, PDCLK_9600 },
+ { 19200, PDCLK_19200 },
+ { 38400, PDCLK_38400 },
+ { 57600, PDCLK_57600 },
+ { 115200, PDCLK_115200 },
+ { 4000000, PDCLK_4000000 },
+};
+
+
+/*
+ * Setup chip for speed.
+ * Called at startup to initialize the chip
+ * and on speed changes.
+ *
+ * Note: Write multiple registers doesn't appear to work
+ */
+static int change_speed(struct stir_cb *stir, unsigned speed)
+{
+ int i, err;
+ __u8 mode;
+
+ for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) {
+ if (speed == stir_modes[i].speed)
+ goto found;
+ }
+
+ warn("%s: invalid speed %d", stir->netdev->name, speed);
+ return -EINVAL;
+
+ found:
+ pr_debug("speed change from %d to %d\n", stir->speed, speed);
+
+ /* Reset modulator */
+ err = write_reg(stir, REG_CTRL1, CTRL1_SRESET);
+ if (err)
+ goto out;
+
+ /* Undocumented magic to tweak the DPLL */
+ err = write_reg(stir, REG_DPLL, 0x15);
+ if (err)
+ goto out;
+
+ /* Set clock */
+ err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk);
+ if (err)
+ goto out;
+
+ mode = MODE_NRESET | MODE_FASTRX;
+ if (isfir(speed))
+ mode |= MODE_FIR | MODE_FFRSTEN;
+ else
+ mode |= MODE_SIR;
+
+ if (speed == 2400)
+ mode |= MODE_2400;
+
+ err = write_reg(stir, REG_MODE, mode);
+ if (err)
+ goto out;
+
+ /* This resets TEMIC style transceiver if any. */
+ err = write_reg(stir, REG_CTRL1,
+ CTRL1_SDMODE | (tx_power & 3) << 1);
+ if (err)
+ goto out;
+
+ err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1);
+ if (err)
+ goto out;
+
+ /* Reset sensitivity */
+ err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5);
+ out:
+ stir->speed = speed;
+ return err;
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int stir_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+
+ netif_stop_queue(netdev);
+
+ /* the IRDA wrapping routines don't deal with non linear skb */
+ SKB_LINEAR_ASSERT(skb);
+
+ skb = xchg(&stir->tx_pending, skb);
+ wake_up(&stir->thr_wait);
+
+ /* this should never happen unless stop/wakeup problem */
+ if (unlikely(skb)) {
+ WARN_ON(1);
+ dev_kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+/*
+ * Wait for the transmit FIFO to have space for next data
+ *
+ * If space < 0 then wait till FIFO completely drains.
+ * FYI: can take up to 13 seconds at 2400baud.
+ */
+static int fifo_txwait(struct stir_cb *stir, int space)
+{
+ int err;
+ unsigned long count, status;
+
+ /* Read FIFO status and count */
+ for(;;) {
+ err = read_reg(stir, REG_FIFOCTL, stir->fifo_status,
+ FIFO_REGS_SIZE);
+ if (unlikely(err != FIFO_REGS_SIZE)) {
+ warn("%s: FIFO register read error: %d",
+ stir->netdev->name, err);
+
+ return err;
+ }
+
+ status = stir->fifo_status[0];
+ count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8
+ | stir->fifo_status[1];
+
+ pr_debug("fifo status 0x%lx count %lu\n", status, count);
+
+ /* error when receive/transmit fifo gets confused */
+ if (status & FIFOCTL_RXERR) {
+ stir->stats.rx_fifo_errors++;
+ stir->stats.rx_errors++;
+ break;
+ }
+
+ if (status & FIFOCTL_TXERR) {
+ stir->stats.tx_fifo_errors++;
+ stir->stats.tx_errors++;
+ break;
+ }
+
+ /* is fifo receiving already, or empty */
+ if (!(status & FIFOCTL_DIR)
+ || (status & FIFOCTL_EMPTY))
+ return 0;
+
+ if (signal_pending(current))
+ return -EINTR;
+
+ /* shutting down? */
+ if (!netif_running(stir->netdev)
+ || !netif_device_present(stir->netdev))
+ return -ESHUTDOWN;
+
+ /* only waiting for some space */
+ if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count)
+ return 0;
+
+ /* estimate transfer time for remaining chars */
+ msleep((count * 8000) / stir->speed);
+ }
+
+ err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR);
+ if (err)
+ return err;
+ err = write_reg(stir, REG_FIFOCTL, 0);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+
+/* Wait for turnaround delay before starting transmit. */
+static void turnaround_delay(const struct stir_cb *stir, long us)
+{
+ long ticks;
+ struct timeval now;
+
+ if (us <= 0)
+ return;
+
+ do_gettimeofday(&now);
+ if (now.tv_sec - stir->rx_time.tv_sec > 0)
+ us -= USEC_PER_SEC;
+ us -= now.tv_usec - stir->rx_time.tv_usec;
+ if (us < 10)
+ return;
+
+ ticks = us / (1000000 / HZ);
+ if (ticks > 0) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(1 + ticks);
+ } else
+ udelay(us);
+}
+
+/*
+ * Start receiver by submitting a request to the receive pipe.
+ * If nothing is available it will return after rx_interval.
+ */
+static int receive_start(struct stir_cb *stir)
+{
+ /* reset state */
+ stir->receiving = 1;
+
+ stir->rx_buff.in_frame = FALSE;
+ stir->rx_buff.state = OUTSIDE_FRAME;
+
+ stir->rx_urb->status = 0;
+ return usb_submit_urb(stir->rx_urb, GFP_KERNEL);
+}
+
+/* Stop all pending receive Urb's */
+static void receive_stop(struct stir_cb *stir)
+{
+ stir->receiving = 0;
+ usb_kill_urb(stir->rx_urb);
+
+ if (stir->rx_buff.in_frame)
+ stir->stats.collisions++;
+}
+/*
+ * Wrap data in socket buffer and send it.
+ */
+static void stir_send(struct stir_cb *stir, struct sk_buff *skb)
+{
+ unsigned wraplen;
+ int first_frame = 0;
+
+ /* if receiving, need to turnaround */
+ if (stir->receiving) {
+ receive_stop(stir);
+ turnaround_delay(stir, irda_get_mtt(skb));
+ first_frame = 1;
+ }
+
+ if (isfir(stir->speed))
+ wraplen = wrap_fir_skb(skb, stir->io_buf);
+ else
+ wraplen = wrap_sir_skb(skb, stir->io_buf);
+
+ /* check for space available in fifo */
+ if (!first_frame)
+ fifo_txwait(stir, wraplen);
+
+ stir->stats.tx_packets++;
+ stir->stats.tx_bytes += skb->len;
+ stir->netdev->trans_start = jiffies;
+ pr_debug("send %d (%d)\n", skb->len, wraplen);
+
+ if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1),
+ stir->io_buf, wraplen,
+ NULL, TRANSMIT_TIMEOUT))
+ stir->stats.tx_errors++;
+}
+
+/*
+ * Transmit state machine thread
+ */
+static int stir_transmit_thread(void *arg)
+{
+ struct stir_cb *stir = arg;
+ struct net_device *dev = stir->netdev;
+ struct sk_buff *skb;
+
+ daemonize("%s", dev->name);
+ allow_signal(SIGTERM);
+
+ while (netif_running(dev)
+ && netif_device_present(dev)
+ && !signal_pending(current))
+ {
+#ifdef CONFIG_PM
+ /* if suspending, then power off and wait */
+ if (unlikely(current->flags & PF_FREEZE)) {
+ if (stir->receiving)
+ receive_stop(stir);
+ else
+ fifo_txwait(stir, -1);
+
+ write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD);
+
+ refrigerator(PF_FREEZE);
+
+ if (change_speed(stir, stir->speed))
+ break;
+ }
+#endif
+
+ /* if something to send? */
+ skb = xchg(&stir->tx_pending, NULL);
+ if (skb) {
+ unsigned new_speed = irda_get_next_speed(skb);
+ netif_wake_queue(dev);
+
+ if (skb->len > 0)
+ stir_send(stir, skb);
+ dev_kfree_skb(skb);
+
+ if ((new_speed != -1) && (stir->speed != new_speed)) {
+ if (fifo_txwait(stir, -1) ||
+ change_speed(stir, new_speed))
+ break;
+ }
+ continue;
+ }
+
+ /* nothing to send? start receiving */
+ if (!stir->receiving
+ && irda_device_txqueue_empty(dev)) {
+ /* Wait otherwise chip gets confused. */
+ if (fifo_txwait(stir, -1))
+ break;
+
+ if (unlikely(receive_start(stir))) {
+ if (net_ratelimit())
+ info("%s: receive usb submit failed",
+ stir->netdev->name);
+ stir->receiving = 0;
+ msleep(10);
+ continue;
+ }
+ }
+
+ /* sleep if nothing to send */
+ wait_event_interruptible(stir->thr_wait, stir->tx_pending);
+ }
+
+ complete_and_exit (&stir->thr_exited, 0);
+}
+
+
+/*
+ * USB bulk receive completion callback.
+ * Wakes up every ms (usb round trip) with wrapped
+ * data.
+ */
+static void stir_rcv_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct stir_cb *stir = urb->context;
+ int err;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(stir->netdev))
+ return;
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0)
+ return;
+
+ if (urb->actual_length > 0) {
+ pr_debug("receive %d\n", urb->actual_length);
+ unwrap_chars(stir, urb->transfer_buffer,
+ urb->actual_length);
+
+ stir->netdev->last_rx = jiffies;
+ do_gettimeofday(&stir->rx_time);
+ }
+
+ /* kernel thread is stopping receiver don't resubmit */
+ if (!stir->receiving)
+ return;
+
+ /* resubmit existing urb */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+
+ /* in case of error, the kernel thread will restart us */
+ if (err) {
+ warn("%s: usb receive submit error: %d",
+ stir->netdev->name, err);
+ stir->receiving = 0;
+ wake_up(&stir->thr_wait);
+ }
+}
+
+/*
+ * Function stir_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int stir_net_open(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+ int err;
+ char hwname[16];
+
+ err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1));
+ if (err)
+ goto err_out1;
+ err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2));
+ if (err)
+ goto err_out1;
+
+ err = change_speed(stir, 9600);
+ if (err)
+ goto err_out1;
+
+ err = -ENOMEM;
+
+ /* Initialize for SIR/FIR to copy data directly into skb. */
+ stir->receiving = 0;
+ stir->rx_buff.truesize = IRDA_SKB_MAX_MTU;
+ stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!stir->rx_buff.skb)
+ goto err_out1;
+
+ skb_reserve(stir->rx_buff.skb, 1);
+ stir->rx_buff.head = stir->rx_buff.skb->data;
+ do_gettimeofday(&stir->rx_time);
+
+ stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!stir->rx_urb)
+ goto err_out2;
+
+ stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
+ if (!stir->io_buf)
+ goto err_out3;
+
+ usb_fill_bulk_urb(stir->rx_urb, stir->usbdev,
+ usb_rcvbulkpipe(stir->usbdev, 2),
+ stir->io_buf, STIR_FIFO_SIZE,
+ stir_rcv_irq, stir);
+
+ stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL);
+ if (!stir->fifo_status)
+ goto err_out4;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ * Note : will send immediately a speed change...
+ */
+ sprintf(hwname, "usb#%d", stir->usbdev->devnum);
+ stir->irlap = irlap_open(netdev, &stir->qos, hwname);
+ if (!stir->irlap) {
+ err("stir4200: irlap_open failed");
+ goto err_out5;
+ }
+
+ /** Start kernel thread for transmit. */
+ stir->thr_pid = kernel_thread(stir_transmit_thread, stir,
+ CLONE_FS|CLONE_FILES);
+ if (stir->thr_pid < 0) {
+ err = stir->thr_pid;
+ err("stir4200: unable to start kernel thread");
+ goto err_out6;
+ }
+
+ netif_start_queue(netdev);
+
+ return 0;
+
+ err_out6:
+ irlap_close(stir->irlap);
+ err_out5:
+ kfree(stir->fifo_status);
+ err_out4:
+ kfree(stir->io_buf);
+ err_out3:
+ usb_free_urb(stir->rx_urb);
+ err_out2:
+ kfree_skb(stir->rx_buff.skb);
+ err_out1:
+ return err;
+}
+
+/*
+ * Function stir_net_close (stir)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int stir_net_close(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+
+ /* Stop transmit processing */
+ netif_stop_queue(netdev);
+
+ /* Kill transmit thread */
+ kill_proc(stir->thr_pid, SIGTERM, 1);
+ wait_for_completion(&stir->thr_exited);
+ kfree(stir->fifo_status);
+
+ /* Mop up receive urb's */
+ usb_kill_urb(stir->rx_urb);
+
+ kfree(stir->io_buf);
+ usb_free_urb(stir->rx_urb);
+ kfree_skb(stir->rx_buff.skb);
+
+ /* Stop and remove instance of IrLAP */
+ if (stir->irlap)
+ irlap_close(stir->irlap);
+
+ stir->irlap = NULL;
+
+ return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int stir_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct stir_cb *stir = netdev_priv(netdev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the device is still there */
+ if (netif_device_present(stir->netdev))
+ ret = change_speed(stir, irq->ifr_baudrate);
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the IrDA stack is still there */
+ if (netif_running(stir->netdev))
+ irda_device_set_media_busy(stir->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING:
+ /* Only approximately true */
+ irq->ifr_receiving = stir->receiving;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *stir_net_get_stats(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+ return &stir->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ * Note : it might be worth protecting this function by a global
+ * spinlock... Or not, because maybe USB already deal with that...
+ */
+static int stir_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct stir_cb *stir = NULL;
+ struct net_device *net;
+ int ret = -ENOMEM;
+
+ /* Allocate network device container. */
+ net = alloc_irdadev(sizeof(*stir));
+ if(!net)
+ goto err_out1;
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(net, &intf->dev);
+ stir = netdev_priv(net);
+ stir->netdev = net;
+ stir->usbdev = dev;
+
+ ret = usb_reset_configuration(dev);
+ if (ret != 0) {
+ err("stir4200: usb reset configuration failed");
+ goto err_out2;
+ }
+
+ printk(KERN_INFO "SigmaTel STIr4200 IRDA/USB found at address %d, "
+ "Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&stir->qos);
+
+ /* That's the Rx capability. */
+ stir->qos.baud_rate.bits &= IR_2400 | IR_9600 | IR_19200 |
+ IR_38400 | IR_57600 | IR_115200 |
+ (IR_4000000 << 8);
+ stir->qos.min_turn_time.bits &= qos_mtt_bits;
+ irda_qos_bits_to_value(&stir->qos);
+
+ init_completion (&stir->thr_exited);
+ init_waitqueue_head (&stir->thr_wait);
+
+ /* Override the network functions we need to use */
+ net->hard_start_xmit = stir_hard_xmit;
+ net->open = stir_net_open;
+ net->stop = stir_net_close;
+ net->get_stats = stir_net_get_stats;
+ net->do_ioctl = stir_net_ioctl;
+
+ ret = register_netdev(net);
+ if (ret != 0)
+ goto err_out2;
+
+ info("IrDA: Registered SigmaTel device %s", net->name);
+
+ usb_set_intfdata(intf, stir);
+
+ return 0;
+
+err_out2:
+ free_netdev(net);
+err_out1:
+ return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void stir_disconnect(struct usb_interface *intf)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ if (!stir)
+ return;
+
+ unregister_netdev(stir->netdev);
+ free_netdev(stir->netdev);
+
+ usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* Power management suspend, so power off the transmitter/receiver */
+static int stir_suspend(struct usb_interface *intf, u32 state)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ netif_device_detach(stir->netdev);
+ return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int stir_resume(struct usb_interface *intf)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ netif_device_attach(stir->netdev);
+
+ /* receiver restarted when send thread wakes up */
+ return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .owner = THIS_MODULE,
+ .name = "stir4200",
+ .probe = stir_probe,
+ .disconnect = stir_disconnect,
+ .id_table = dongles,
+#ifdef CONFIG_PM
+ .suspend = stir_suspend,
+ .resume = stir_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init stir_init(void)
+{
+ return usb_register(&irda_driver);
+}
+module_init(stir_init);
+
+/*
+ * Module removal
+ */
+static void __exit stir_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(stir_cleanup);
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
new file mode 100644
index 000000000000..0dd6bc7af3f2
--- /dev/null
+++ b/drivers/net/irda/tekram-sir.c
@@ -0,0 +1,232 @@
+/*********************************************************************
+ *
+ * Filename: tekram.c
+ * Version: 1.3
+ * Description: Implementation of the Tekram IrMate IR-210B dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Wed Oct 21 20:02:35 1998
+ * Modified at: Sun Oct 27 22:02:38 2002
+ * Modified by: Martin Diehl <mad@mdiehl.de>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli,
+ * Copyright (c) 2002 Martin Diehl,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int tekram_delay = 150; /* default is 150 ms */
+module_param(tekram_delay, int, 0);
+MODULE_PARM_DESC(tekram_delay, "tekram dongle write complete delay");
+
+static int tekram_open(struct sir_dev *);
+static int tekram_close(struct sir_dev *);
+static int tekram_change_speed(struct sir_dev *, unsigned);
+static int tekram_reset(struct sir_dev *);
+
+#define TEKRAM_115200 0x00
+#define TEKRAM_57600 0x01
+#define TEKRAM_38400 0x02
+#define TEKRAM_19200 0x03
+#define TEKRAM_9600 0x04
+
+#define TEKRAM_PW 0x10 /* Pulse select bit */
+
+static struct dongle_driver tekram = {
+ .owner = THIS_MODULE,
+ .driver_name = "Tekram IR-210B",
+ .type = IRDA_TEKRAM_DONGLE,
+ .open = tekram_open,
+ .close = tekram_close,
+ .reset = tekram_reset,
+ .set_speed = tekram_change_speed,
+};
+
+static int __init tekram_sir_init(void)
+{
+ if (tekram_delay < 1 || tekram_delay > 500)
+ tekram_delay = 200;
+ IRDA_DEBUG(1, "%s - using %d ms delay\n",
+ tekram.driver_name, tekram_delay);
+ return irda_register_dongle(&tekram);
+}
+
+static void __exit tekram_sir_cleanup(void)
+{
+ irda_unregister_dongle(&tekram);
+}
+
+static int tekram_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int tekram_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function tekram_change_speed (dev, state, speed)
+ *
+ * Set the speed for the Tekram IRMate 210 type dongle. Warning, this
+ * function must be called with a process context!
+ *
+ * Algorithm
+ * 1. clear DTR
+ * 2. set RTS, and wait at least 7 us
+ * 3. send Control Byte to the IR-210 through TXD to set new baud rate
+ * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
+ * it takes about 100 msec)
+ *
+ * [oops, why 100 msec? sending 1 byte (10 bits) takes 1.05 msec
+ * - is this probably to compensate for delays in tty layer?]
+ *
+ * 5. clear RTS (return to NORMAL Operation)
+ * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here
+ * after
+ */
+
+#define TEKRAM_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1)
+
+static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 byte;
+ static int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ switch(state) {
+ case SIRDEV_STATE_DONGLE_SPEED:
+
+ switch (speed) {
+ default:
+ speed = 9600;
+ ret = -EINVAL;
+ /* fall thru */
+ case 9600:
+ byte = TEKRAM_PW|TEKRAM_9600;
+ break;
+ case 19200:
+ byte = TEKRAM_PW|TEKRAM_19200;
+ break;
+ case 38400:
+ byte = TEKRAM_PW|TEKRAM_38400;
+ break;
+ case 57600:
+ byte = TEKRAM_PW|TEKRAM_57600;
+ break;
+ case 115200:
+ byte = TEKRAM_115200;
+ break;
+ }
+
+ /* Set DTR, Clear RTS */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+
+ /* Wait at least 7us */
+ udelay(14);
+
+ /* Write control byte */
+ sirdev_raw_write(dev, &byte, 1);
+
+ dev->speed = speed;
+
+ state = TEKRAM_STATE_WAIT_SPEED;
+ delay = tekram_delay;
+ break;
+
+ case TEKRAM_STATE_WAIT_SPEED:
+ /* Set DTR, Set RTS */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+ udelay(50);
+ break;
+
+ default:
+ IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+ ret = -EINVAL;
+ break;
+ }
+
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+/*
+ * Function tekram_reset (driver)
+ *
+ * This function resets the tekram dongle. Warning, this function
+ * must be called with a process context!!
+ *
+ * Algorithm:
+ * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
+ * 1. clear RTS
+ * 2. set DTR, and wait at least 1 ms
+ * 3. clear DTR to SPACE state, wait at least 50 us for further
+ * operation
+ */
+
+static int tekram_reset(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Clear DTR, Set RTS */
+ sirdev_set_dtr_rts(dev, FALSE, TRUE);
+
+ /* Should sleep 1 ms */
+ msleep(1);
+
+ /* Set DTR, Set RTS */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Wait at least 50 us */
+ udelay(75);
+
+ dev->speed = 9600;
+
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
+
+module_init(tekram_sir_init);
+module_exit(tekram_sir_cleanup);
diff --git a/drivers/net/irda/tekram.c b/drivers/net/irda/tekram.c
new file mode 100644
index 000000000000..8f6258221cb0
--- /dev/null
+++ b/drivers/net/irda/tekram.c
@@ -0,0 +1,282 @@
+/*********************************************************************
+ *
+ * Filename: tekram.c
+ * Version: 1.2
+ * Description: Implementation of the Tekram IrMate IR-210B dongle
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Wed Oct 21 20:02:35 1998
+ * Modified at: Fri Dec 17 09:13:09 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+static void tekram_open(dongle_t *self, struct qos_info *qos);
+static void tekram_close(dongle_t *self);
+static int tekram_change_speed(struct irda_task *task);
+static int tekram_reset(struct irda_task *task);
+
+#define TEKRAM_115200 0x00
+#define TEKRAM_57600 0x01
+#define TEKRAM_38400 0x02
+#define TEKRAM_19200 0x03
+#define TEKRAM_9600 0x04
+
+#define TEKRAM_PW 0x10 /* Pulse select bit */
+
+static struct dongle_reg dongle = {
+ .type = IRDA_TEKRAM_DONGLE,
+ .open = tekram_open,
+ .close = tekram_close,
+ .reset = tekram_reset,
+ .change_speed = tekram_change_speed,
+ .owner = THIS_MODULE,
+};
+
+static int __init tekram_init(void)
+{
+ return irda_device_register_dongle(&dongle);
+}
+
+static void __exit tekram_cleanup(void)
+{
+ irda_device_unregister_dongle(&dongle);
+}
+
+static void tekram_open(dongle_t *self, struct qos_info *qos)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+ irda_qos_bits_to_value(qos);
+}
+
+static void tekram_close(dongle_t *self)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ /* Power off dongle */
+ self->set_dtr_rts(self->dev, FALSE, FALSE);
+
+ if (self->reset_task)
+ irda_task_delete(self->reset_task);
+ if (self->speed_task)
+ irda_task_delete(self->speed_task);
+}
+
+/*
+ * Function tekram_change_speed (dev, state, speed)
+ *
+ * Set the speed for the Tekram IRMate 210 type dongle. Warning, this
+ * function must be called with a process context!
+ *
+ * Algorithm
+ * 1. clear DTR
+ * 2. set RTS, and wait at least 7 us
+ * 3. send Control Byte to the IR-210 through TXD to set new baud rate
+ * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
+ * it takes about 100 msec)
+ * 5. clear RTS (return to NORMAL Operation)
+ * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here
+ * after
+ */
+static int tekram_change_speed(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ __u32 speed = (__u32) task->param;
+ __u8 byte;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ IRDA_ASSERT(task != NULL, return -1;);
+
+ if (self->speed_task && self->speed_task != task) {
+ IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
+ return msecs_to_jiffies(10);
+ } else
+ self->speed_task = task;
+
+ switch (speed) {
+ default:
+ case 9600:
+ byte = TEKRAM_PW|TEKRAM_9600;
+ break;
+ case 19200:
+ byte = TEKRAM_PW|TEKRAM_19200;
+ break;
+ case 38400:
+ byte = TEKRAM_PW|TEKRAM_38400;
+ break;
+ case 57600:
+ byte = TEKRAM_PW|TEKRAM_57600;
+ break;
+ case 115200:
+ byte = TEKRAM_115200;
+ break;
+ }
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ case IRDA_TASK_CHILD_INIT:
+ /*
+ * Need to reset the dongle and go to 9600 bps before
+ * programming
+ */
+ if (irda_task_execute(self, tekram_reset, NULL, task,
+ (void *) speed))
+ {
+ /* Dongle need more time to reset */
+ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
+
+ /* Give reset 1 sec to finish */
+ ret = msecs_to_jiffies(1000);
+ } else
+ irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
+ break;
+ case IRDA_TASK_CHILD_WAIT:
+ IRDA_WARNING("%s(), resetting dongle timed out!\n",
+ __FUNCTION__);
+ ret = -1;
+ break;
+ case IRDA_TASK_CHILD_DONE:
+ /* Set DTR, Clear RTS */
+ self->set_dtr_rts(self->dev, TRUE, FALSE);
+
+ /* Wait at least 7us */
+ udelay(14);
+
+ /* Write control byte */
+ self->write(self->dev, &byte, 1);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT);
+
+ /* Wait at least 100 ms */
+ ret = msecs_to_jiffies(150);
+ break;
+ case IRDA_TASK_WAIT:
+ /* Set DTR, Set RTS */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->speed_task = NULL;
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function tekram_reset (driver)
+ *
+ * This function resets the tekram dongle. Warning, this function
+ * must be called with a process context!!
+ *
+ * Algorithm:
+ * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
+ * 1. clear RTS
+ * 2. set DTR, and wait at least 1 ms
+ * 3. clear DTR to SPACE state, wait at least 50 us for further
+ * operation
+ */
+int tekram_reset(struct irda_task *task)
+{
+ dongle_t *self = (dongle_t *) task->instance;
+ int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+ IRDA_ASSERT(task != NULL, return -1;);
+
+ if (self->reset_task && self->reset_task != task) {
+ IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
+ return msecs_to_jiffies(10);
+ } else
+ self->reset_task = task;
+
+ /* Power off dongle */
+ //self->set_dtr_rts(self->dev, FALSE, FALSE);
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ switch (task->state) {
+ case IRDA_TASK_INIT:
+ irda_task_next_state(task, IRDA_TASK_WAIT1);
+
+ /* Sleep 50 ms */
+ ret = msecs_to_jiffies(50);
+ break;
+ case IRDA_TASK_WAIT1:
+ /* Clear DTR, Set RTS */
+ self->set_dtr_rts(self->dev, FALSE, TRUE);
+
+ irda_task_next_state(task, IRDA_TASK_WAIT2);
+
+ /* Should sleep 1 ms */
+ ret = msecs_to_jiffies(1);
+ break;
+ case IRDA_TASK_WAIT2:
+ /* Set DTR, Set RTS */
+ self->set_dtr_rts(self->dev, TRUE, TRUE);
+
+ /* Wait at least 50 us */
+ udelay(75);
+
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ break;
+ default:
+ IRDA_ERROR("%s(), unknown state %d\n",
+ __FUNCTION__, task->state);
+ irda_task_next_state(task, IRDA_TASK_DONE);
+ self->reset_task = NULL;
+ ret = -1;
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
+
+/*
+ * Function init_module (void)
+ *
+ * Initialize Tekram module
+ *
+ */
+module_init(tekram_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ * Cleanup Tekram module
+ *
+ */
+module_exit(tekram_cleanup);
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
new file mode 100644
index 000000000000..8bafb455c102
--- /dev/null
+++ b/drivers/net/irda/via-ircc.c
@@ -0,0 +1,1676 @@
+/********************************************************************
+ Filename: via-ircc.c
+ Version: 1.0
+ Description: Driver for the VIA VT8231/VT8233 IrDA chipsets
+ Author: VIA Technologies,inc
+ Date : 08/06/2003
+
+Copyright (c) 1998-2003 VIA Technologies, Inc.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTIES OR REPRESENTATIONS; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+F01 Oct/02/02: Modify code for V0.11(move out back to back transfer)
+F02 Oct/28/02: Add SB device ID for 3147 and 3177.
+ Comment :
+ jul/09/2002 : only implement two kind of dongle currently.
+ Oct/02/2002 : work on VT8231 and VT8233 .
+ Aug/06/2003 : change driver format to pci driver .
+
+2004-02-16: <sda@bdit.de>
+- Removed unneeded 'legacy' pci stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- On speed change from core, don't send SIR frame with new speed.
+ Use current speed and change speeds later.
+- Make module-param dongle_id actually work.
+- New dongle_id 17 (0x11): TDFS4500. Single-ended SIR only.
+ Tested with home-grown PCB on EPIA boards.
+- Code cleanup.
+
+ ********************************************************************/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "via-ircc.h"
+
+#define VIA_MODULE_NAME "via-ircc"
+#define CHIP_IO_EXTENT 0x40
+
+static char *driver_name = VIA_MODULE_NAME;
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+static int dongle_id = 0; /* default: probe */
+
+/* We can't guess the type of connected dongle, user *must* supply it. */
+module_param(dongle_id, int, 0);
+
+/* FIXME : we should not need this, because instances should be automatically
+ * managed by the PCI layer. Especially that we seem to only be using the
+ * first entry. Jean II */
+/* Max 4 instances for now */
+static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+/* Some prototypes */
+static int via_ircc_open(int i, chipio_t * info, unsigned int id);
+static int via_ircc_close(struct via_ircc_cb *self);
+static int via_ircc_dma_receive(struct via_ircc_cb *self);
+static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
+ int iobase);
+static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev);
+static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev);
+static void via_hw_init(struct via_ircc_cb *self);
+static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 baud);
+static irqreturn_t via_ircc_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+static int via_ircc_is_receiving(struct via_ircc_cb *self);
+static int via_ircc_read_dongle_id(int iobase);
+
+static int via_ircc_net_open(struct net_device *dev);
+static int via_ircc_net_close(struct net_device *dev);
+static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
+ int cmd);
+static struct net_device_stats *via_ircc_net_get_stats(struct net_device
+ *dev);
+static void via_ircc_change_dongle_speed(int iobase, int speed,
+ int dongle_id);
+static int RxTimerHandler(struct via_ircc_cb *self, int iobase);
+static void hwreset(struct via_ircc_cb *self);
+static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase);
+static int upload_rxdata(struct via_ircc_cb *self, int iobase);
+static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id);
+static void __devexit via_remove_one (struct pci_dev *pdev);
+
+/* FIXME : Should use udelay() instead, even if we are x86 only - Jean II */
+static void iodelay(int udelay)
+{
+ u8 data;
+ int i;
+
+ for (i = 0; i < udelay; i++) {
+ data = inb(0x80);
+ }
+}
+
+static struct pci_device_id via_pci_tbl[] = {
+ { PCI_VENDOR_ID_VIA, 0x8231, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
+ { PCI_VENDOR_ID_VIA, 0x3109, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
+ { PCI_VENDOR_ID_VIA, 0x3074, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
+ { PCI_VENDOR_ID_VIA, 0x3147, PCI_ANY_ID, PCI_ANY_ID,0,0,3 },
+ { PCI_VENDOR_ID_VIA, 0x3177, PCI_ANY_ID, PCI_ANY_ID,0,0,4 },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci,via_pci_tbl);
+
+
+static struct pci_driver via_driver = {
+ .name = VIA_MODULE_NAME,
+ .id_table = via_pci_tbl,
+ .probe = via_init_one,
+ .remove = __devexit_p(via_remove_one),
+};
+
+
+/*
+ * Function via_ircc_init ()
+ *
+ * Initialize chip. Just find out chip type and resource.
+ */
+static int __init via_ircc_init(void)
+{
+ int rc;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ rc = pci_register_driver(&via_driver);
+ if (rc < 0) {
+ IRDA_DEBUG(0, "%s(): error rc = %d, returning -ENODEV...\n",
+ __FUNCTION__, rc);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id)
+{
+ int rc;
+ u8 temp,oldPCI_40,oldPCI_44,bTmp,bTmp1;
+ u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
+ chipio_t info;
+
+ IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);
+
+ rc = pci_enable_device (pcidev);
+ if (rc) {
+ IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
+ return -ENODEV;
+ }
+
+ // South Bridge exist
+ if ( ReadLPCReg(0x20) != 0x3C )
+ Chipset=0x3096;
+ else
+ Chipset=0x3076;
+
+ if (Chipset==0x3076) {
+ IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);
+
+ WriteLPCReg(7,0x0c );
+ temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
+ if((temp&0x01)==1) { // BIOS close or no FIR
+ WriteLPCReg(0x1d, 0x82 );
+ WriteLPCReg(0x23,0x18);
+ temp=ReadLPCReg(0xF0);
+ if((temp&0x01)==0) {
+ temp=(ReadLPCReg(0x74)&0x03); //DMA
+ FirDRQ0=temp + 4;
+ temp=(ReadLPCReg(0x74)&0x0C) >> 2;
+ FirDRQ1=temp + 4;
+ } else {
+ temp=(ReadLPCReg(0x74)&0x0C) >> 2; //DMA
+ FirDRQ0=temp + 4;
+ FirDRQ1=FirDRQ0;
+ }
+ FirIRQ=(ReadLPCReg(0x70)&0x0f); //IRQ
+ FirIOBase=ReadLPCReg(0x60 ) << 8; //IO Space :high byte
+ FirIOBase=FirIOBase| ReadLPCReg(0x61) ; //low byte
+ FirIOBase=FirIOBase ;
+ info.fir_base=FirIOBase;
+ info.irq=FirIRQ;
+ info.dma=FirDRQ1;
+ info.dma2=FirDRQ0;
+ pci_read_config_byte(pcidev,0x40,&bTmp);
+ pci_write_config_byte(pcidev,0x40,((bTmp | 0x08) & 0xfe));
+ pci_read_config_byte(pcidev,0x42,&bTmp);
+ pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0));
+ pci_write_config_byte(pcidev,0x5a,0xc0);
+ WriteLPCReg(0x28, 0x70 );
+ if (via_ircc_open(0, &info,0x3076) == 0)
+ rc=0;
+ } else
+ rc = -ENODEV; //IR not turn on
+ } else { //Not VT1211
+ IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);
+
+ pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
+ if((bTmp&0x01)==1) { // BIOS enable FIR
+ //Enable Double DMA clock
+ pci_read_config_byte(pcidev,0x42,&oldPCI_40);
+ pci_write_config_byte(pcidev,0x42,oldPCI_40 | 0x80);
+ pci_read_config_byte(pcidev,0x40,&oldPCI_40);
+ pci_write_config_byte(pcidev,0x40,oldPCI_40 & 0xf7);
+ pci_read_config_byte(pcidev,0x44,&oldPCI_44);
+ pci_write_config_byte(pcidev,0x44,0x4e);
+ //---------- read configuration from Function0 of south bridge
+ if((bTmp&0x02)==0) {
+ pci_read_config_byte(pcidev,0x44,&bTmp1); //DMA
+ FirDRQ0 = (bTmp1 & 0x30) >> 4;
+ pci_read_config_byte(pcidev,0x44,&bTmp1);
+ FirDRQ1 = (bTmp1 & 0xc0) >> 6;
+ } else {
+ pci_read_config_byte(pcidev,0x44,&bTmp1); //DMA
+ FirDRQ0 = (bTmp1 & 0x30) >> 4 ;
+ FirDRQ1=0;
+ }
+ pci_read_config_byte(pcidev,0x47,&bTmp1); //IRQ
+ FirIRQ = bTmp1 & 0x0f;
+
+ pci_read_config_byte(pcidev,0x69,&bTmp);
+ FirIOBase = bTmp << 8;//hight byte
+ pci_read_config_byte(pcidev,0x68,&bTmp);
+ FirIOBase = (FirIOBase | bTmp ) & 0xfff0;
+ //-------------------------
+ info.fir_base=FirIOBase;
+ info.irq=FirIRQ;
+ info.dma=FirDRQ1;
+ info.dma2=FirDRQ0;
+ if (via_ircc_open(0, &info,0x3096) == 0)
+ rc=0;
+ } else
+ rc = -ENODEV; //IR not turn on !!!!!
+ }//Not VT1211
+
+ IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
+ return rc;
+}
+
+/*
+ * Function via_ircc_clean ()
+ *
+ * Close all configured chips
+ *
+ */
+static void via_ircc_clean(void)
+{
+ int i;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ via_ircc_close(dev_self[i]);
+ }
+}
+
+static void __devexit via_remove_one (struct pci_dev *pdev)
+{
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ /* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
+ * to get our driver instance and call directly via_ircc_close().
+ * See vlsi_ir for details...
+ * Jean II */
+ via_ircc_clean();
+
+ /* FIXME : This should be in via_ircc_close(), because here we may
+ * theoritically disable still configured devices :-( - Jean II */
+ pci_disable_device(pdev);
+}
+
+static void __exit via_ircc_cleanup(void)
+{
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ /* FIXME : This should be redundant, as pci_unregister_driver()
+ * should call via_remove_one() on each device.
+ * Jean II */
+ via_ircc_clean();
+
+ /* Cleanup all instances of the driver */
+ pci_unregister_driver (&via_driver);
+}
+
+/*
+ * Function via_ircc_open (iobase, irq)
+ *
+ * Open driver instance
+ *
+ */
+static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
+{
+ struct net_device *dev;
+ struct via_ircc_cb *self;
+ int err;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ /* Allocate new instance of the driver */
+ dev = alloc_irdadev(sizeof(struct via_ircc_cb));
+ if (dev == NULL)
+ return -ENOMEM;
+
+ self = dev->priv;
+ self->netdev = dev;
+ spin_lock_init(&self->lock);
+
+ /* FIXME : We should store our driver instance in the PCI layer,
+ * using pci_set_drvdata(), not in this array.
+ * See vlsi_ir for details... - Jean II */
+ /* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->index = i;
+ /* Initialize Resource */
+ self->io.cfg_base = info->cfg_base;
+ self->io.fir_base = info->fir_base;
+ self->io.irq = info->irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = info->dma;
+ self->io.dma2 = info->dma2;
+ self->io.fifo_size = 32;
+ self->chip_id = id;
+ self->st_fifo.len = 0;
+ self->RxDataReady = 0;
+
+ /* Reserve the ioports that we need */
+ if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
+ IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__, self->io.fir_base);
+ err = -ENODEV;
+ goto err_out1;
+ }
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* Check if user has supplied the dongle id or not */
+ if (!dongle_id)
+ dongle_id = via_ircc_read_dongle_id(self->io.fir_base);
+ self->io.dongle_id = dongle_id;
+
+ /* The only value we must override it the baudrate */
+ /* Maximum speeds and capabilities are dongle-dependant. */
+ switch( self->io.dongle_id ){
+ case 0x0d:
+ self->qos.baud_rate.bits =
+ IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 |
+ IR_576000 | IR_1152000 | (IR_4000000 << 8);
+ break;
+ default:
+ self->qos.baud_rate.bits =
+ IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
+ break;
+ }
+
+ /* Following was used for testing:
+ *
+ * self->qos.baud_rate.bits = IR_9600;
+ *
+ * Is is no good, as it prohibits (error-prone) speed-changes.
+ */
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384 + 2048;
+ self->tx_buff.truesize = 14384 + 2048;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out2;
+ }
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out3;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Tx queue info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Keep track of module usage */
+ SET_MODULE_OWNER(dev);
+
+ /* Override the network functions we need to use */
+ dev->hard_start_xmit = via_ircc_hard_xmit_sir;
+ dev->open = via_ircc_net_open;
+ dev->stop = via_ircc_net_close;
+ dev->do_ioctl = via_ircc_net_ioctl;
+ dev->get_stats = via_ircc_net_get_stats;
+
+ err = register_netdev(dev);
+ if (err)
+ goto err_out4;
+
+ IRDA_MESSAGE("IrDA: Registered device %s (via-ircc)\n", dev->name);
+
+ /* Initialise the hardware..
+ */
+ self->io.speed = 9600;
+ via_hw_init(self);
+ return 0;
+ err_out4:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ err_out3:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ err_out2:
+ release_region(self->io.fir_base, self->io.fir_ext);
+ err_out1:
+ free_netdev(dev);
+ dev_self[i] = NULL;
+ return err;
+}
+
+/*
+ * Function via_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int via_ircc_close(struct via_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ ResetChip(iobase, 5); //hardware reset.
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
+ __FUNCTION__, self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ dev_self[self->index] = NULL;
+
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+/*
+ * Function via_hw_init(self)
+ *
+ * Returns non-negative on success.
+ *
+ * Formerly via_ircc_setup
+ */
+static void via_hw_init(struct via_ircc_cb *self)
+{
+ int iobase = self->io.fir_base;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
+ // FIFO Init
+ EnRXFIFOReadyInt(iobase, OFF);
+ EnRXFIFOHalfLevelInt(iobase, OFF);
+ EnTXFIFOHalfLevelInt(iobase, OFF);
+ EnTXFIFOUnderrunEOMInt(iobase, ON);
+ EnTXFIFOReadyInt(iobase, OFF);
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, OFF);
+
+ if (ReadLPCReg(0x20) == 0x3c)
+ WriteLPCReg(0xF0, 0); // for VT1211
+ /* Int Init */
+ EnRXSpecInt(iobase, ON);
+
+ /* The following is basically hwreset */
+ /* If this is the case, why not just call hwreset() ? Jean II */
+ ResetChip(iobase, 5);
+ EnableDMA(iobase, OFF);
+ EnableTX(iobase, OFF);
+ EnableRX(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ EnTXDMA(iobase, OFF);
+ RXStart(iobase, OFF);
+ TXStart(iobase, OFF);
+ InitCard(iobase);
+ CommonInit(iobase);
+ SIRFilter(iobase, ON);
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ EnTXCRC(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x00);
+ SetBaudRate(iobase, 9600);
+ SetPulseWidth(iobase, 12);
+ SetSendPreambleCount(iobase, 0);
+
+ self->io.speed = 9600;
+ self->st_fifo.len = 0;
+
+ via_ircc_change_dongle_speed(iobase, self->io.speed,
+ self->io.dongle_id);
+
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+}
+
+/*
+ * Function via_ircc_read_dongle_id (void)
+ *
+ */
+static int via_ircc_read_dongle_id(int iobase)
+{
+ int dongle_id = 9; /* Default to IBM */
+
+ IRDA_ERROR("via-ircc: dongle probing not supported, please specify dongle_id module parameter.\n");
+ return dongle_id;
+}
+
+/*
+ * Function via_ircc_change_dongle_speed (iobase, speed, dongle_id)
+ * Change speed of the attach dongle
+ * only implement two type of dongle currently.
+ */
+static void via_ircc_change_dongle_speed(int iobase, int speed,
+ int dongle_id)
+{
+ u8 mode = 0;
+
+ /* speed is unused, as we use IsSIROn()/IsMIROn() */
+ speed = speed;
+
+ IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
+ __FUNCTION__, speed, iobase, dongle_id);
+
+ switch (dongle_id) {
+
+ /* Note: The dongle_id's listed here are derived from
+ * nsc-ircc.c */
+
+ case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+ UseOneRX(iobase, ON); // use one RX pin RX1,RX2
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, OFF);
+
+ EnRX2(iobase, ON); //sir to rx2
+ EnGPIOtoRX2(iobase, OFF);
+
+ if (IsSIROn(iobase)) { //sir
+ // Mode select Off
+ SlowIRRXLowActive(iobase, ON);
+ udelay(1000);
+ SlowIRRXLowActive(iobase, OFF);
+ } else {
+ if (IsMIROn(iobase)) { //mir
+ // Mode select On
+ SlowIRRXLowActive(iobase, OFF);
+ udelay(20);
+ } else { // fir
+ if (IsFIROn(iobase)) { //fir
+ // Mode select On
+ SlowIRRXLowActive(iobase, OFF);
+ udelay(20);
+ }
+ }
+ }
+ break;
+
+ case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+ UseOneRX(iobase, ON); //use ONE RX....RX1
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, OFF); // invert RX pin
+
+ EnRX2(iobase, ON);
+ EnGPIOtoRX2(iobase, OFF);
+ if (IsSIROn(iobase)) { //sir
+ // Mode select On
+ SlowIRRXLowActive(iobase, ON);
+ udelay(20);
+ // Mode select Off
+ SlowIRRXLowActive(iobase, OFF);
+ }
+ if (IsMIROn(iobase)) { //mir
+ // Mode select On
+ SlowIRRXLowActive(iobase, OFF);
+ udelay(20);
+ // Mode select Off
+ SlowIRRXLowActive(iobase, ON);
+ } else { // fir
+ if (IsFIROn(iobase)) { //fir
+ // Mode select On
+ SlowIRRXLowActive(iobase, OFF);
+ // TX On
+ WriteTX(iobase, ON);
+ udelay(20);
+ // Mode select OFF
+ SlowIRRXLowActive(iobase, ON);
+ udelay(20);
+ // TX Off
+ WriteTX(iobase, OFF);
+ }
+ }
+ break;
+
+ case 0x0d:
+ UseOneRX(iobase, OFF); // use two RX pin RX1,RX2
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, OFF);
+ SlowIRRXLowActive(iobase, OFF);
+ if (IsSIROn(iobase)) { //sir
+ EnGPIOtoRX2(iobase, OFF);
+ WriteGIO(iobase, OFF);
+ EnRX2(iobase, OFF); //sir to rx2
+ } else { // fir mir
+ EnGPIOtoRX2(iobase, OFF);
+ WriteGIO(iobase, OFF);
+ EnRX2(iobase, OFF); //fir to rx
+ }
+ break;
+
+ case 0x11: /* Temic TFDS4500 */
+
+ IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);
+
+ UseOneRX(iobase, ON); //use ONE RX....RX1
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, ON); // invert RX pin
+
+ EnRX2(iobase, ON); //sir to rx2
+ EnGPIOtoRX2(iobase, OFF);
+
+ if( IsSIROn(iobase) ){ //sir
+
+ // Mode select On
+ SlowIRRXLowActive(iobase, ON);
+ udelay(20);
+ // Mode select Off
+ SlowIRRXLowActive(iobase, OFF);
+
+ } else{
+ IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
+ }
+ break;
+
+ case 0x0ff: /* Vishay */
+ if (IsSIROn(iobase))
+ mode = 0;
+ else if (IsMIROn(iobase))
+ mode = 1;
+ else if (IsFIROn(iobase))
+ mode = 2;
+ else if (IsVFIROn(iobase))
+ mode = 5; //VFIR-16
+ SI_SetMode(iobase, mode);
+ break;
+
+ default:
+ IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n",
+ __FUNCTION__, dongle_id);
+ }
+}
+
+/*
+ * Function via_ircc_change_speed (self, baud)
+ *
+ * Change the speed of the device
+ *
+ */
+static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
+{
+ struct net_device *dev = self->netdev;
+ u16 iobase;
+ u8 value = 0, bTmp;
+
+ iobase = self->io.fir_base;
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+ IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);
+
+ WriteReg(iobase, I_ST_CT_0, 0x0);
+
+ /* Controller mode sellection */
+ switch (speed) {
+ case 2400:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ value = (115200/speed)-1;
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ break;
+ case 576000:
+ /* FIXME: this can't be right, as it's the same as 115200,
+ * and 576000 is MIR, not SIR. */
+ value = 0;
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ break;
+ case 1152000:
+ value = 0;
+ SetMIR(iobase, ON);
+ /* FIXME: CRC ??? */
+ break;
+ case 4000000:
+ value = 0;
+ SetFIR(iobase, ON);
+ SetPulseWidth(iobase, 0);
+ SetSendPreambleCount(iobase, 14);
+ CRC16(iobase, OFF);
+ EnTXCRC(iobase, ON);
+ break;
+ case 16000000:
+ value = 0;
+ SetVFIR(iobase, ON);
+ /* FIXME: CRC ??? */
+ break;
+ default:
+ value = 0;
+ break;
+ }
+
+ /* Set baudrate to 0x19[2..7] */
+ bTmp = (ReadReg(iobase, I_CF_H_1) & 0x03);
+ bTmp |= value << 2;
+ WriteReg(iobase, I_CF_H_1, bTmp);
+
+ /* Some dongles may need to be informed about speed changes. */
+ via_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
+
+ /* Set FIFO size to 64 */
+ SetFIFO(iobase, 64);
+
+ /* Enable IR */
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+
+ // EnTXFIFOHalfLevelInt(iobase,ON);
+
+ /* Enable some interrupts so we can receive frames */
+ //EnAllInt(iobase,ON);
+
+ if (IsSIROn(iobase)) {
+ SIRFilter(iobase, ON);
+ SIRRecvAny(iobase, ON);
+ } else {
+ SIRFilter(iobase, OFF);
+ SIRRecvAny(iobase, OFF);
+ }
+
+ if (speed > 115200) {
+ /* Install FIR xmit handler */
+ dev->hard_start_xmit = via_ircc_hard_xmit_fir;
+ via_ircc_dma_receive(self);
+ } else {
+ /* Install SIR xmit handler */
+ dev->hard_start_xmit = via_ircc_hard_xmit_sir;
+ }
+ netif_wake_queue(dev);
+}
+
+/*
+ * Function via_ircc_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct via_ircc_cb *self;
+ unsigned long flags;
+ u16 iobase;
+ __u32 speed;
+
+ self = (struct via_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ via_ircc_change_speed(self, speed);
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+ InitCard(iobase);
+ CommonInit(iobase);
+ SIRFilter(iobase, ON);
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ EnTXCRC(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x00);
+
+ spin_lock_irqsave(&self->lock, flags);
+ self->tx_buff.data = self->tx_buff.head;
+ self->tx_buff.len =
+ async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+ /* Send this frame with old speed */
+ SetBaudRate(iobase, self->io.speed);
+ SetPulseWidth(iobase, 12);
+ SetSendPreambleCount(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+
+ EnableTX(iobase, ON);
+ EnableRX(iobase, OFF);
+
+ ResetChip(iobase, 0);
+ ResetChip(iobase, 1);
+ ResetChip(iobase, 2);
+ ResetChip(iobase, 3);
+ ResetChip(iobase, 4);
+
+ EnAllInt(iobase, ON);
+ EnTXDMA(iobase, ON);
+ EnRXDMA(iobase, OFF);
+
+ irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
+ DMA_TX_MODE);
+
+ SetSendByte(iobase, self->tx_buff.len);
+ RXStart(iobase, OFF);
+ TXStart(iobase, ON);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct via_ircc_cb *self;
+ u16 iobase;
+ __u32 speed;
+ unsigned long flags;
+
+ self = (struct via_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+
+ if (self->st_fifo.len)
+ return 0;
+ if (self->chip_id == 0x3076)
+ iodelay(1500);
+ else
+ udelay(1500);
+ netif_stop_queue(dev);
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ if (!skb->len) {
+ via_ircc_change_speed(self, speed);
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+ spin_lock_irqsave(&self->lock, flags);
+ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+ self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+
+ self->tx_fifo.tail += skb->len;
+ self->stats.tx_bytes += skb->len;
+ memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
+ skb->len);
+ self->tx_fifo.len++;
+ self->tx_fifo.free++;
+//F01 if (self->tx_fifo.len == 1) {
+ via_ircc_dma_xmit(self, iobase);
+//F01 }
+//F01 if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) netif_wake_queue(self->netdev);
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return 0;
+
+}
+
+static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
+{
+ EnTXDMA(iobase, OFF);
+ self->io.direction = IO_XMIT;
+ EnPhys(iobase, ON);
+ EnableTX(iobase, ON);
+ EnableRX(iobase, OFF);
+ ResetChip(iobase, 0);
+ ResetChip(iobase, 1);
+ ResetChip(iobase, 2);
+ ResetChip(iobase, 3);
+ ResetChip(iobase, 4);
+ EnAllInt(iobase, ON);
+ EnTXDMA(iobase, ON);
+ EnRXDMA(iobase, OFF);
+ irda_setup_dma(self->io.dma,
+ ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
+ self->tx_buff.head) + self->tx_buff_dma,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
+ IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
+ __FUNCTION__, self->tx_fifo.ptr,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ self->tx_fifo.len);
+
+ SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
+ RXStart(iobase, OFF);
+ TXStart(iobase, ON);
+ return 0;
+
+}
+
+/*
+ * Function via_ircc_dma_xmit_complete (self)
+ *
+ * The transfer of a frame in finished. This function will only be called
+ * by the interrupt handler
+ *
+ */
+static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
+{
+ int iobase;
+ int ret = TRUE;
+ u8 Tx_status;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ iobase = self->io.fir_base;
+ /* Disable DMA */
+// DisableDmaChannel(self->io.dma);
+ /* Check for underrrun! */
+ /* Clear bit, by writing 1 into it */
+ Tx_status = GetTXStatus(iobase);
+ if (Tx_status & 0x08) {
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+ hwreset(self);
+// how to clear underrrun ?
+ } else {
+ self->stats.tx_packets++;
+ ResetChip(iobase, 3);
+ ResetChip(iobase, 4);
+ }
+ /* Check if we need to change the speed */
+ if (self->new_speed) {
+ via_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ /* Finished with this frame, so prepare for next */
+ if (IsFIROn(iobase)) {
+ if (self->tx_fifo.len) {
+ self->tx_fifo.len--;
+ self->tx_fifo.ptr++;
+ }
+ }
+ IRDA_DEBUG(1,
+ "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
+ __FUNCTION__,
+ self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
+/* F01_S
+ // Any frames to be sent back-to-back?
+ if (self->tx_fifo.len) {
+ // Not finished yet!
+ via_ircc_dma_xmit(self, iobase);
+ ret = FALSE;
+ } else {
+F01_E*/
+ // Reset Tx FIFO info
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+//F01 }
+
+ // Make sure we have room for more frames
+//F01 if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) {
+ // Not busy transmitting anymore
+ // Tell the network layer, that we can accept more frames
+ netif_wake_queue(self->netdev);
+//F01 }
+ return ret;
+}
+
+/*
+ * Function via_ircc_dma_receive (self)
+ *
+ * Set configuration for receive a frame.
+ *
+ */
+static int via_ircc_dma_receive(struct via_ircc_cb *self)
+{
+ int iobase;
+
+ iobase = self->io.fir_base;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+ self->RxDataReady = 0;
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+ self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+ self->st_fifo.tail = self->st_fifo.head = 0;
+
+ EnPhys(iobase, ON);
+ EnableTX(iobase, OFF);
+ EnableRX(iobase, ON);
+
+ ResetChip(iobase, 0);
+ ResetChip(iobase, 1);
+ ResetChip(iobase, 2);
+ ResetChip(iobase, 3);
+ ResetChip(iobase, 4);
+
+ EnAllInt(iobase, ON);
+ EnTXDMA(iobase, OFF);
+ EnRXDMA(iobase, ON);
+ irda_setup_dma(self->io.dma2, self->rx_buff_dma,
+ self->rx_buff.truesize, DMA_RX_MODE);
+ TXStart(iobase, OFF);
+ RXStart(iobase, ON);
+
+ return 0;
+}
+
+/*
+ * Function via_ircc_dma_receive_complete (self)
+ *
+ * Controller Finished with receiving frames,
+ * and this routine is call by ISR
+ *
+ */
+static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
+ int iobase)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ int len, i;
+ u8 status = 0;
+
+ iobase = self->io.fir_base;
+ st_fifo = &self->st_fifo;
+
+ if (self->io.speed < 4000000) { //Speed below FIR
+ len = GetRecvByte(iobase, self);
+ skb = dev_alloc_skb(len + 1);
+ if (skb == NULL)
+ return FALSE;
+ // Make sure IP header gets aligned
+ skb_reserve(skb, 1);
+ skb_put(skb, len - 2);
+ if (self->chip_id == 0x3076) {
+ for (i = 0; i < len - 2; i++)
+ skb->data[i] = self->rx_buff.data[i * 2];
+ } else {
+ if (self->chip_id == 0x3096) {
+ for (i = 0; i < len - 2; i++)
+ skb->data[i] =
+ self->rx_buff.data[i];
+ }
+ }
+ // Move to next frame
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ return TRUE;
+ }
+
+ else { //FIR mode
+ len = GetRecvByte(iobase, self);
+ if (len == 0)
+ return TRUE; //interrupt only, data maybe move by RxT
+ if (((len - 4) < 2) || ((len - 4) > 2048)) {
+ IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
+ __FUNCTION__, len, RxCurCount(iobase, self),
+ self->RxLastCount);
+ hwreset(self);
+ return FALSE;
+ }
+ IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
+ __FUNCTION__,
+ st_fifo->len, len - 4, RxCurCount(iobase, self));
+
+ st_fifo->entries[st_fifo->tail].status = status;
+ st_fifo->entries[st_fifo->tail].len = len;
+ st_fifo->pending_bytes += len;
+ st_fifo->tail++;
+ st_fifo->len++;
+ if (st_fifo->tail > MAX_RX_WINDOW)
+ st_fifo->tail = 0;
+ self->RxDataReady = 0;
+
+ // It maybe have MAX_RX_WINDOW package receive by
+ // receive_complete before Timer IRQ
+/* F01_S
+ if (st_fifo->len < (MAX_RX_WINDOW+2 )) {
+ RXStart(iobase,ON);
+ SetTimer(iobase,4);
+ }
+ else {
+F01_E */
+ EnableRX(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ RXStart(iobase, OFF);
+//F01_S
+ // Put this entry back in fifo
+ if (st_fifo->head > MAX_RX_WINDOW)
+ st_fifo->head = 0;
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ skb = dev_alloc_skb(len + 1 - 4);
+ /*
+ * if frame size,data ptr,or skb ptr are wrong ,the get next
+ * entry.
+ */
+ if ((skb == NULL) || (skb->data == NULL)
+ || (self->rx_buff.data == NULL) || (len < 6)) {
+ self->stats.rx_dropped++;
+ return TRUE;
+ }
+ skb_reserve(skb, 1);
+ skb_put(skb, len - 4);
+
+ memcpy(skb->data, self->rx_buff.data, len - 4);
+ IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
+ len - 4, self->rx_buff.data);
+
+ // Move to next frame
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+
+//F01_E
+ } //FIR
+ return TRUE;
+
+}
+
+/*
+ * if frame is received , but no INT ,then use this routine to upload frame.
+ */
+static int upload_rxdata(struct via_ircc_cb *self, int iobase)
+{
+ struct sk_buff *skb;
+ int len;
+ struct st_fifo *st_fifo;
+ st_fifo = &self->st_fifo;
+
+ len = GetRecvByte(iobase, self);
+
+ IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);
+
+ skb = dev_alloc_skb(len + 1);
+ if ((skb == NULL) || ((len - 4) < 2)) {
+ self->stats.rx_dropped++;
+ return FALSE;
+ }
+ skb_reserve(skb, 1);
+ skb_put(skb, len - 4 + 1);
+ memcpy(skb->data, self->rx_buff.data, len - 4 + 1);
+ st_fifo->tail++;
+ st_fifo->len++;
+ if (st_fifo->tail > MAX_RX_WINDOW)
+ st_fifo->tail = 0;
+ // Move to next frame
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ if (st_fifo->len < (MAX_RX_WINDOW + 2)) {
+ RXStart(iobase, ON);
+ } else {
+ EnableRX(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ RXStart(iobase, OFF);
+ }
+ return TRUE;
+}
+
+/*
+ * Implement back to back receive , use this routine to upload data.
+ */
+
+static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ int len;
+ u8 status;
+
+ st_fifo = &self->st_fifo;
+
+ if (CkRxRecv(iobase, self)) {
+ // if still receiving ,then return ,don't upload frame
+ self->RetryCount = 0;
+ SetTimer(iobase, 20);
+ self->RxDataReady++;
+ return FALSE;
+ } else
+ self->RetryCount++;
+
+ if ((self->RetryCount >= 1) ||
+ ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize)
+ || (st_fifo->len >= (MAX_RX_WINDOW))) {
+ while (st_fifo->len > 0) { //upload frame
+ // Put this entry back in fifo
+ if (st_fifo->head > MAX_RX_WINDOW)
+ st_fifo->head = 0;
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ skb = dev_alloc_skb(len + 1 - 4);
+ /*
+ * if frame size, data ptr, or skb ptr are wrong,
+ * then get next entry.
+ */
+ if ((skb == NULL) || (skb->data == NULL)
+ || (self->rx_buff.data == NULL) || (len < 6)) {
+ self->stats.rx_dropped++;
+ continue;
+ }
+ skb_reserve(skb, 1);
+ skb_put(skb, len - 4);
+ memcpy(skb->data, self->rx_buff.data, len - 4);
+
+ IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
+ len - 4, st_fifo->head);
+
+ // Move to next frame
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ } //while
+ self->RetryCount = 0;
+
+ IRDA_DEBUG(2,
+ "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
+ __FUNCTION__,
+ GetHostStatus(iobase), GetRXStatus(iobase));
+
+ /*
+ * if frame is receive complete at this routine ,then upload
+ * frame.
+ */
+ if ((GetRXStatus(iobase) & 0x10)
+ && (RxCurCount(iobase, self) != self->RxLastCount)) {
+ upload_rxdata(self, iobase);
+ if (irda_device_txqueue_empty(self->netdev))
+ via_ircc_dma_receive(self);
+ }
+ } // timer detect complete
+ else
+ SetTimer(iobase, 4);
+ return TRUE;
+
+}
+
+
+
+/*
+ * Function via_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t via_ircc_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct via_ircc_cb *self;
+ int iobase;
+ u8 iHostIntType, iRxIntType, iTxIntType;
+
+ if (!dev) {
+ IRDA_WARNING("%s: irq %d for unknown device.\n", driver_name,
+ irq);
+ return IRQ_NONE;
+ }
+ self = (struct via_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+ spin_lock(&self->lock);
+ iHostIntType = GetHostStatus(iobase);
+
+ IRDA_DEBUG(4, "%s(): iHostIntType %02x: %s %s %s %02x\n",
+ __FUNCTION__, iHostIntType,
+ (iHostIntType & 0x40) ? "Timer" : "",
+ (iHostIntType & 0x20) ? "Tx" : "",
+ (iHostIntType & 0x10) ? "Rx" : "",
+ (iHostIntType & 0x0e) >> 1);
+
+ if ((iHostIntType & 0x40) != 0) { //Timer Event
+ self->EventFlag.TimeOut++;
+ ClearTimerInt(iobase, 1);
+ if (self->io.direction == IO_XMIT) {
+ via_ircc_dma_xmit(self, iobase);
+ }
+ if (self->io.direction == IO_RECV) {
+ /*
+ * frame ready hold too long, must reset.
+ */
+ if (self->RxDataReady > 30) {
+ hwreset(self);
+ if (irda_device_txqueue_empty(self->netdev)) {
+ via_ircc_dma_receive(self);
+ }
+ } else { // call this to upload frame.
+ RxTimerHandler(self, iobase);
+ }
+ } //RECV
+ } //Timer Event
+ if ((iHostIntType & 0x20) != 0) { //Tx Event
+ iTxIntType = GetTXStatus(iobase);
+
+ IRDA_DEBUG(4, "%s(): iTxIntType %02x: %s %s %s %s\n",
+ __FUNCTION__, iTxIntType,
+ (iTxIntType & 0x08) ? "FIFO underr." : "",
+ (iTxIntType & 0x04) ? "EOM" : "",
+ (iTxIntType & 0x02) ? "FIFO ready" : "",
+ (iTxIntType & 0x01) ? "Early EOM" : "");
+
+ if (iTxIntType & 0x4) {
+ self->EventFlag.EOMessage++; // read and will auto clean
+ if (via_ircc_dma_xmit_complete(self)) {
+ if (irda_device_txqueue_empty
+ (self->netdev)) {
+ via_ircc_dma_receive(self);
+ }
+ } else {
+ self->EventFlag.Unknown++;
+ }
+ } //EOP
+ } //Tx Event
+ //----------------------------------------
+ if ((iHostIntType & 0x10) != 0) { //Rx Event
+ /* Check if DMA has finished */
+ iRxIntType = GetRXStatus(iobase);
+
+ IRDA_DEBUG(4, "%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n",
+ __FUNCTION__, iRxIntType,
+ (iRxIntType & 0x80) ? "PHY err." : "",
+ (iRxIntType & 0x40) ? "CRC err" : "",
+ (iRxIntType & 0x20) ? "FIFO overr." : "",
+ (iRxIntType & 0x10) ? "EOF" : "",
+ (iRxIntType & 0x08) ? "RxData" : "",
+ (iRxIntType & 0x02) ? "RxMaxLen" : "",
+ (iRxIntType & 0x01) ? "SIR bad" : "");
+ if (!iRxIntType)
+ IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);
+
+ if (iRxIntType & 0x10) {
+ if (via_ircc_dma_receive_complete(self, iobase)) {
+//F01 if(!(IsFIROn(iobase))) via_ircc_dma_receive(self);
+ via_ircc_dma_receive(self);
+ }
+ } // No ERR
+ else { //ERR
+ IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
+ __FUNCTION__, iRxIntType, iHostIntType,
+ RxCurCount(iobase, self),
+ self->RxLastCount);
+
+ if (iRxIntType & 0x20) { //FIFO OverRun ERR
+ ResetChip(iobase, 0);
+ ResetChip(iobase, 1);
+ } else { //PHY,CRC ERR
+
+ if (iRxIntType != 0x08)
+ hwreset(self); //F01
+ }
+ via_ircc_dma_receive(self);
+ } //ERR
+
+ } //Rx Event
+ spin_unlock(&self->lock);
+ return IRQ_RETVAL(iHostIntType);
+}
+
+static void hwreset(struct via_ircc_cb *self)
+{
+ int iobase;
+ iobase = self->io.fir_base;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ ResetChip(iobase, 5);
+ EnableDMA(iobase, OFF);
+ EnableTX(iobase, OFF);
+ EnableRX(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ EnTXDMA(iobase, OFF);
+ RXStart(iobase, OFF);
+ TXStart(iobase, OFF);
+ InitCard(iobase);
+ CommonInit(iobase);
+ SIRFilter(iobase, ON);
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ EnTXCRC(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x00);
+ SetBaudRate(iobase, 9600);
+ SetPulseWidth(iobase, 12);
+ SetSendPreambleCount(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+
+ /* Restore speed. */
+ via_ircc_change_speed(self, self->io.speed);
+
+ self->st_fifo.len = 0;
+}
+
+/*
+ * Function via_ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int via_ircc_is_receiving(struct via_ircc_cb *self)
+{
+ int status = FALSE;
+ int iobase;
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ iobase = self->io.fir_base;
+ if (CkRxRecv(iobase, self))
+ status = TRUE;
+
+ IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);
+
+ return status;
+}
+
+
+/*
+ * Function via_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int via_ircc_net_open(struct net_device *dev)
+{
+ struct via_ircc_cb *self;
+ int iobase;
+ char hwname[32];
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct via_ircc_cb *) dev->priv;
+ self->stats.rx_packets = 0;
+ IRDA_ASSERT(self != NULL, return 0;);
+ iobase = self->io.fir_base;
+ if (request_irq(self->io.irq, via_ircc_interrupt, 0, dev->name, dev)) {
+ IRDA_WARNING("%s, unable to allocate irq=%d\n", driver_name,
+ self->io.irq);
+ return -EAGAIN;
+ }
+ /*
+ * Always allocate the DMA channel after the IRQ, and clean up on
+ * failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ IRDA_WARNING("%s, unable to allocate dma=%d\n", driver_name,
+ self->io.dma);
+ free_irq(self->io.irq, self);
+ return -EAGAIN;
+ }
+ if (self->io.dma2 != self->io.dma) {
+ if (request_dma(self->io.dma2, dev->name)) {
+ IRDA_WARNING("%s, unable to allocate dma2=%d\n",
+ driver_name, self->io.dma2);
+ free_irq(self->io.irq, self);
+ return -EAGAIN;
+ }
+ }
+
+
+ /* turn on interrupts */
+ EnAllInt(iobase, ON);
+ EnInternalLoop(iobase, OFF);
+ EnExternalLoop(iobase, OFF);
+
+ /* */
+ via_ircc_dma_receive(self);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ sprintf(hwname, "VIA @ 0x%x", iobase);
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ self->RxLastCount = 0;
+
+ return 0;
+}
+
+/*
+ * Function via_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int via_ircc_net_close(struct net_device *dev)
+{
+ struct via_ircc_cb *self;
+ int iobase;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct via_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+ iobase = self->io.fir_base;
+ EnTXDMA(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ DisableDmaChannel(self->io.dma);
+
+ /* Disable interrupts */
+ EnAllInt(iobase, OFF);
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ return 0;
+}
+
+/*
+ * Function via_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
+ int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct via_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = dev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
+ cmd);
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&self->lock, flags);
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ goto out;
+ }
+ via_ircc_change_speed(self, irq->ifr_baudrate);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ goto out;
+ }
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = via_ircc_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ out:
+ spin_unlock_irqrestore(&self->lock, flags);
+ return ret;
+}
+
+static struct net_device_stats *via_ircc_net_get_stats(struct net_device
+ *dev)
+{
+ struct via_ircc_cb *self = (struct via_ircc_cb *) dev->priv;
+
+ return &self->stats;
+}
+
+MODULE_AUTHOR("VIA Technologies,inc");
+MODULE_DESCRIPTION("VIA IrDA Device Driver");
+MODULE_LICENSE("GPL");
+
+module_init(via_ircc_init);
+module_exit(via_ircc_cleanup);
diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
new file mode 100644
index 000000000000..204b1b34ffc7
--- /dev/null
+++ b/drivers/net/irda/via-ircc.h
@@ -0,0 +1,853 @@
+/*********************************************************************
+ *
+ * Filename: via-ircc.h
+ * Version: 1.0
+ * Description: Driver for the VIA VT8231/VT8233 IrDA chipsets
+ * Author: VIA Technologies, inc
+ * Date : 08/06/2003
+
+Copyright (c) 1998-2003 VIA Technologies, Inc.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTIES OR REPRESENTATIONS; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ * Comment:
+ * jul/08/2002 : Rx buffer length should use Rx ring ptr.
+ * Oct/28/2002 : Add SB id for 3147 and 3177.
+ * jul/09/2002 : only implement two kind of dongle currently.
+ * Oct/02/2002 : work on VT8231 and VT8233 .
+ * Aug/06/2003 : change driver format to pci driver .
+ ********************************************************************/
+#ifndef via_IRCC_H
+#define via_IRCC_H
+#include <linux/time.h>
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW + 2];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Lenght of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Lenght of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+
+struct eventflag // for keeping track of Interrupt Events
+{
+ //--------tx part
+ unsigned char TxFIFOUnderRun;
+ unsigned char EOMessage;
+ unsigned char TxFIFOReady;
+ unsigned char EarlyEOM;
+ //--------rx part
+ unsigned char PHYErr;
+ unsigned char CRCErr;
+ unsigned char RxFIFOOverRun;
+ unsigned char EOPacket;
+ unsigned char RxAvail;
+ unsigned char TooLargePacket;
+ unsigned char SIRBad;
+ //--------unknown
+ unsigned char Unknown;
+ //----------
+ unsigned char TimeOut;
+ unsigned char RxDMATC;
+ unsigned char TxDMATC;
+};
+
+/* Private data for each instance */
+struct via_ircc_cb {
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ __u8 ier; /* Interrupt enable register */
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 flags; /* Interface flags */
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ struct eventflag EventFlag;
+ struct pm_dev *dev;
+ unsigned int chip_id; /* to remember chip id */
+ unsigned int RetryCount;
+ unsigned int RxDataReady;
+ unsigned int RxLastCount;
+};
+
+
+//---------I=Infrared, H=Host, M=Misc, T=Tx, R=Rx, ST=Status,
+// CF=Config, CT=Control, L=Low, H=High, C=Count
+#define I_CF_L_0 0x10
+#define I_CF_H_0 0x11
+#define I_SIR_BOF 0x12
+#define I_SIR_EOF 0x13
+#define I_ST_CT_0 0x15
+#define I_ST_L_1 0x16
+#define I_ST_H_1 0x17
+#define I_CF_L_1 0x18
+#define I_CF_H_1 0x19
+#define I_CF_L_2 0x1a
+#define I_CF_H_2 0x1b
+#define I_CF_3 0x1e
+#define H_CT 0x20
+#define H_ST 0x21
+#define M_CT 0x22
+#define TX_CT_1 0x23
+#define TX_CT_2 0x24
+#define TX_ST 0x25
+#define RX_CT 0x26
+#define RX_ST 0x27
+#define RESET 0x28
+#define P_ADDR 0x29
+#define RX_C_L 0x2a
+#define RX_C_H 0x2b
+#define RX_P_L 0x2c
+#define RX_P_H 0x2d
+#define TX_C_L 0x2e
+#define TX_C_H 0x2f
+#define TIMER 0x32
+#define I_CF_4 0x33
+#define I_T_C_L 0x34
+#define I_T_C_H 0x35
+#define VERSION 0x3f
+//-------------------------------
+#define StartAddr 0x10 // the first register address
+#define EndAddr 0x3f // the last register address
+#define GetBit(val,bit) val = (unsigned char) ((val>>bit) & 0x1)
+ // Returns the bit
+#define SetBit(val,bit) val= (unsigned char ) (val | (0x1 << bit))
+ // Sets bit to 1
+#define ResetBit(val,bit) val= (unsigned char ) (val & ~(0x1 << bit))
+ // Sets bit to 0
+
+#define OFF 0
+#define ON 1
+#define DMA_TX_MODE 0x08
+#define DMA_RX_MODE 0x04
+
+#define DMA1 0
+#define DMA2 0xc0
+#define MASK1 DMA1+0x0a
+#define MASK2 DMA2+0x14
+
+#define Clk_bit 0x40
+#define Tx_bit 0x01
+#define Rd_Valid 0x08
+#define RxBit 0x08
+
+static void DisableDmaChannel(unsigned int channel)
+{
+ switch (channel) { // 8 Bit DMA channels DMAC1
+ case 0:
+ outb(4, MASK1); //mask channel 0
+ break;
+ case 1:
+ outb(5, MASK1); //Mask channel 1
+ break;
+ case 2:
+ outb(6, MASK1); //Mask channel 2
+ break;
+ case 3:
+ outb(7, MASK1); //Mask channel 3
+ break;
+ case 5:
+ outb(5, MASK2); //Mask channel 5
+ break;
+ case 6:
+ outb(6, MASK2); //Mask channel 6
+ break;
+ case 7:
+ outb(7, MASK2); //Mask channel 7
+ break;
+ default:
+ break;
+ }; //Switch
+}
+
+static unsigned char ReadLPCReg(int iRegNum)
+{
+ unsigned char iVal;
+
+ outb(0x87, 0x2e);
+ outb(0x87, 0x2e);
+ outb(iRegNum, 0x2e);
+ iVal = inb(0x2f);
+ outb(0xaa, 0x2e);
+
+ return iVal;
+}
+
+static void WriteLPCReg(int iRegNum, unsigned char iVal)
+{
+
+ outb(0x87, 0x2e);
+ outb(0x87, 0x2e);
+ outb(iRegNum, 0x2e);
+ outb(iVal, 0x2f);
+ outb(0xAA, 0x2e);
+}
+
+static __u8 ReadReg(unsigned int BaseAddr, int iRegNum)
+{
+ return ((__u8) inb(BaseAddr + iRegNum));
+}
+
+static void WriteReg(unsigned int BaseAddr, int iRegNum, unsigned char iVal)
+{
+ outb(iVal, BaseAddr + iRegNum);
+}
+
+static int WriteRegBit(unsigned int BaseAddr, unsigned char RegNum,
+ unsigned char BitPos, unsigned char value)
+{
+ __u8 Rtemp, Wtemp;
+
+ if (BitPos > 7) {
+ return -1;
+ }
+ if ((RegNum < StartAddr) || (RegNum > EndAddr))
+ return -1;
+ Rtemp = ReadReg(BaseAddr, RegNum);
+ if (value == 0)
+ Wtemp = ResetBit(Rtemp, BitPos);
+ else {
+ if (value == 1)
+ Wtemp = SetBit(Rtemp, BitPos);
+ else
+ return -1;
+ }
+ WriteReg(BaseAddr, RegNum, Wtemp);
+ return 0;
+}
+
+static __u8 CheckRegBit(unsigned int BaseAddr, unsigned char RegNum,
+ unsigned char BitPos)
+{
+ __u8 temp;
+
+ if (BitPos > 7)
+ return 0xff;
+ if ((RegNum < StartAddr) || (RegNum > EndAddr)) {
+// printf("what is the register %x!\n",RegNum);
+ }
+ temp = ReadReg(BaseAddr, RegNum);
+ return GetBit(temp, BitPos);
+}
+
+static void SetMaxRxPacketSize(__u16 iobase, __u16 size)
+{
+ __u16 low, high;
+ if ((size & 0xe000) == 0) {
+ low = size & 0x00ff;
+ high = (size & 0x1f00) >> 8;
+ WriteReg(iobase, I_CF_L_2, low);
+ WriteReg(iobase, I_CF_H_2, high);
+
+ }
+
+}
+
+//for both Rx and Tx
+
+static void SetFIFO(__u16 iobase, __u16 value)
+{
+ switch (value) {
+ case 128:
+ WriteRegBit(iobase, 0x11, 0, 0);
+ WriteRegBit(iobase, 0x11, 7, 1);
+ break;
+ case 64:
+ WriteRegBit(iobase, 0x11, 0, 0);
+ WriteRegBit(iobase, 0x11, 7, 0);
+ break;
+ case 32:
+ WriteRegBit(iobase, 0x11, 0, 1);
+ WriteRegBit(iobase, 0x11, 7, 0);
+ break;
+ default:
+ WriteRegBit(iobase, 0x11, 0, 0);
+ WriteRegBit(iobase, 0x11, 7, 0);
+ }
+
+}
+
+#define CRC16(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,7,val) //0 for 32 CRC
+/*
+#define SetVFIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,5,val)
+#define SetFIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,6,val)
+#define SetMIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,5,val)
+#define SetSIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,4,val)
+*/
+#define SIRFilter(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,3,val)
+#define Filter(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,2,val)
+#define InvertTX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,1,val)
+#define InvertRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,0,val)
+//****************************I_CF_H_0
+#define EnableTX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,4,val)
+#define EnableRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,3,val)
+#define EnableDMA(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,2,val)
+#define SIRRecvAny(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,1,val)
+#define DiableTrans(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,0,val)
+//***************************I_SIR_BOF,I_SIR_EOF
+#define SetSIRBOF(BaseAddr,val) WriteReg(BaseAddr,I_SIR_BOF,val)
+#define SetSIREOF(BaseAddr,val) WriteReg(BaseAddr,I_SIR_EOF,val)
+#define GetSIRBOF(BaseAddr) ReadReg(BaseAddr,I_SIR_BOF)
+#define GetSIREOF(BaseAddr) ReadReg(BaseAddr,I_SIR_EOF)
+//*******************I_ST_CT_0
+#define EnPhys(BaseAddr,val) WriteRegBit(BaseAddr,I_ST_CT_0,7,val)
+#define IsModeError(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,6) //RO
+#define IsVFIROn(BaseAddr) CheckRegBit(BaseAddr,0x14,0) //RO for VT1211 only
+#define IsFIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,5) //RO
+#define IsMIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,4) //RO
+#define IsSIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,3) //RO
+#define IsEnableTX(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,2) //RO
+#define IsEnableRX(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,1) //RO
+#define Is16CRC(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,0) //RO
+//***************************I_CF_3
+#define DisableAdjacentPulseWidth(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,5,val) //1 disable
+#define DisablePulseWidthAdjust(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,4,val) //1 disable
+#define UseOneRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,1,val) //0 use two RX
+#define SlowIRRXLowActive(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,0,val) //0 show RX high=1 in SIR
+//***************************H_CT
+#define EnAllInt(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,7,val)
+#define TXStart(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,6,val)
+#define RXStart(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,5,val)
+#define ClearRXInt(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,4,val) // 1 clear
+//*****************H_ST
+#define IsRXInt(BaseAddr) CheckRegBit(BaseAddr,H_ST,4)
+#define GetIntIndentify(BaseAddr) ((ReadReg(BaseAddr,H_ST)&0xf1) >>1)
+#define IsHostBusy(BaseAddr) CheckRegBit(BaseAddr,H_ST,0)
+#define GetHostStatus(BaseAddr) ReadReg(BaseAddr,H_ST) //RO
+//**************************M_CT
+#define EnTXDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,7,val)
+#define EnRXDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,6,val)
+#define SwapDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,5,val)
+#define EnInternalLoop(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,4,val)
+#define EnExternalLoop(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,3,val)
+//**************************TX_CT_1
+#define EnTXFIFOHalfLevelInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,4,val) //half empty int (1 half)
+#define EnTXFIFOUnderrunEOMInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,5,val)
+#define EnTXFIFOReadyInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,6,val) //int when reach it threshold (setting by bit 4)
+//**************************TX_CT_2
+#define ForceUnderrun(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,7,val) // force an underrun int
+#define EnTXCRC(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,6,val) //1 for FIR,MIR...0 (not SIR)
+#define ForceBADCRC(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,5,val) //force an bad CRC
+#define SendSIP(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,4,val) //send indication pulse for prevent SIR disturb
+#define ClearEnTX(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,3,val) // opposite to EnTX
+//*****************TX_ST
+#define GetTXStatus(BaseAddr) ReadReg(BaseAddr,TX_ST) //RO
+//**************************RX_CT
+#define EnRXSpecInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,0,val)
+#define EnRXFIFOReadyInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,1,val) //enable int when reach it threshold (setting by bit 7)
+#define EnRXFIFOHalfLevelInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,7,val) //enable int when (1) half full...or (0) just not full
+//*****************RX_ST
+#define GetRXStatus(BaseAddr) ReadReg(BaseAddr,RX_ST) //RO
+//***********************P_ADDR
+#define SetPacketAddr(BaseAddr,addr) WriteReg(BaseAddr,P_ADDR,addr)
+//***********************I_CF_4
+#define EnGPIOtoRX2(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,7,val)
+#define EnTimerInt(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,1,val)
+#define ClearTimerInt(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,0,val)
+//***********************I_T_C_L
+#define WriteGIO(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_L,7,val)
+#define ReadGIO(BaseAddr) CheckRegBit(BaseAddr,I_T_C_L,7)
+#define ReadRX(BaseAddr) CheckRegBit(BaseAddr,I_T_C_L,3) //RO
+#define WriteTX(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_L,0,val)
+//***********************I_T_C_H
+#define EnRX2(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_H,7,val)
+#define ReadRX2(BaseAddr) CheckRegBit(BaseAddr,I_T_C_H,7)
+//**********************Version
+#define GetFIRVersion(BaseAddr) ReadReg(BaseAddr,VERSION)
+
+
+static void SetTimer(__u16 iobase, __u8 count)
+{
+ EnTimerInt(iobase, OFF);
+ WriteReg(iobase, TIMER, count);
+ EnTimerInt(iobase, ON);
+}
+
+
+static void SetSendByte(__u16 iobase, __u32 count)
+{
+ __u32 low, high;
+
+ if ((count & 0xf000) == 0) {
+ low = count & 0x00ff;
+ high = (count & 0x0f00) >> 8;
+ WriteReg(iobase, TX_C_L, low);
+ WriteReg(iobase, TX_C_H, high);
+ }
+}
+
+static void ResetChip(__u16 iobase, __u8 type)
+{
+ __u8 value;
+
+ value = (type + 2) << 4;
+ WriteReg(iobase, RESET, type);
+}
+
+static int CkRxRecv(__u16 iobase, struct via_ircc_cb *self)
+{
+ __u8 low, high;
+ __u16 wTmp = 0, wTmp1 = 0, wTmp_new = 0;
+
+ low = ReadReg(iobase, RX_C_L);
+ high = ReadReg(iobase, RX_C_H);
+ wTmp1 = high;
+ wTmp = (wTmp1 << 8) | low;
+ udelay(10);
+ low = ReadReg(iobase, RX_C_L);
+ high = ReadReg(iobase, RX_C_H);
+ wTmp1 = high;
+ wTmp_new = (wTmp1 << 8) | low;
+ if (wTmp_new != wTmp)
+ return 1;
+ else
+ return 0;
+
+}
+
+static __u16 RxCurCount(__u16 iobase, struct via_ircc_cb * self)
+{
+ __u8 low, high;
+ __u16 wTmp = 0, wTmp1 = 0;
+
+ low = ReadReg(iobase, RX_P_L);
+ high = ReadReg(iobase, RX_P_H);
+ wTmp1 = high;
+ wTmp = (wTmp1 << 8) | low;
+ return wTmp;
+}
+
+/* This Routine can only use in recevie_complete
+ * for it will update last count.
+ */
+
+static __u16 GetRecvByte(__u16 iobase, struct via_ircc_cb * self)
+{
+ __u8 low, high;
+ __u16 wTmp, wTmp1, ret;
+
+ low = ReadReg(iobase, RX_P_L);
+ high = ReadReg(iobase, RX_P_H);
+ wTmp1 = high;
+ wTmp = (wTmp1 << 8) | low;
+
+
+ if (wTmp >= self->RxLastCount)
+ ret = wTmp - self->RxLastCount;
+ else
+ ret = (0x8000 - self->RxLastCount) + wTmp;
+ self->RxLastCount = wTmp;
+
+/* RX_P is more actually the RX_C
+ low=ReadReg(iobase,RX_C_L);
+ high=ReadReg(iobase,RX_C_H);
+
+ if(!(high&0xe000)) {
+ temp=(high<<8)+low;
+ return temp;
+ }
+ else return 0;
+*/
+ return ret;
+}
+
+static void Sdelay(__u16 scale)
+{
+ __u8 bTmp;
+ int i, j;
+
+ for (j = 0; j < scale; j++) {
+ for (i = 0; i < 0x20; i++) {
+ bTmp = inb(0xeb);
+ outb(bTmp, 0xeb);
+ }
+ }
+}
+
+static void Tdelay(__u16 scale)
+{
+ __u8 bTmp;
+ int i, j;
+
+ for (j = 0; j < scale; j++) {
+ for (i = 0; i < 0x50; i++) {
+ bTmp = inb(0xeb);
+ outb(bTmp, 0xeb);
+ }
+ }
+}
+
+
+static void ActClk(__u16 iobase, __u8 value)
+{
+ __u8 bTmp;
+ bTmp = ReadReg(iobase, 0x34);
+ if (value)
+ WriteReg(iobase, 0x34, bTmp | Clk_bit);
+ else
+ WriteReg(iobase, 0x34, bTmp & ~Clk_bit);
+}
+
+static void ClkTx(__u16 iobase, __u8 Clk, __u8 Tx)
+{
+ __u8 bTmp;
+
+ bTmp = ReadReg(iobase, 0x34);
+ if (Clk == 0)
+ bTmp &= ~Clk_bit;
+ else {
+ if (Clk == 1)
+ bTmp |= Clk_bit;
+ }
+ WriteReg(iobase, 0x34, bTmp);
+ Sdelay(1);
+ if (Tx == 0)
+ bTmp &= ~Tx_bit;
+ else {
+ if (Tx == 1)
+ bTmp |= Tx_bit;
+ }
+ WriteReg(iobase, 0x34, bTmp);
+}
+
+static void Wr_Byte(__u16 iobase, __u8 data)
+{
+ __u8 bData = data;
+// __u8 btmp;
+ int i;
+
+ ClkTx(iobase, 0, 1);
+
+ Tdelay(2);
+ ActClk(iobase, 1);
+ Tdelay(1);
+
+ for (i = 0; i < 8; i++) { //LDN
+
+ if ((bData >> i) & 0x01) {
+ ClkTx(iobase, 0, 1); //bit data = 1;
+ } else {
+ ClkTx(iobase, 0, 0); //bit data = 1;
+ }
+ Tdelay(2);
+ Sdelay(1);
+ ActClk(iobase, 1); //clk hi
+ Tdelay(1);
+ }
+}
+
+static __u8 Rd_Indx(__u16 iobase, __u8 addr, __u8 index)
+{
+ __u8 data = 0, bTmp, data_bit;
+ int i;
+
+ bTmp = addr | (index << 1) | 0;
+ ClkTx(iobase, 0, 0);
+ Tdelay(2);
+ ActClk(iobase, 1);
+ udelay(1);
+ Wr_Byte(iobase, bTmp);
+ Sdelay(1);
+ ClkTx(iobase, 0, 0);
+ Tdelay(2);
+ for (i = 0; i < 10; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ Tdelay(1);
+ ClkTx(iobase, 0, 1);
+ Tdelay(1);
+ bTmp = ReadReg(iobase, 0x34);
+ if (!(bTmp & Rd_Valid))
+ break;
+ }
+ if (!(bTmp & Rd_Valid)) {
+ for (i = 0; i < 8; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ bTmp = ReadReg(iobase, 0x34);
+ data_bit = 1 << i;
+ if (bTmp & RxBit)
+ data |= data_bit;
+ else
+ data &= ~data_bit;
+ Tdelay(2);
+ }
+ } else {
+ for (i = 0; i < 2; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ Tdelay(2);
+ }
+ bTmp = ReadReg(iobase, 0x34);
+ }
+ for (i = 0; i < 1; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ Tdelay(2);
+ }
+ ClkTx(iobase, 0, 0);
+ Tdelay(1);
+ for (i = 0; i < 3; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ Tdelay(2);
+ }
+ return data;
+}
+
+static void Wr_Indx(__u16 iobase, __u8 addr, __u8 index, __u8 data)
+{
+ int i;
+ __u8 bTmp;
+
+ ClkTx(iobase, 0, 0);
+ udelay(2);
+ ActClk(iobase, 1);
+ udelay(1);
+ bTmp = addr | (index << 1) | 1;
+ Wr_Byte(iobase, bTmp);
+ Wr_Byte(iobase, data);
+ for (i = 0; i < 2; i++) {
+ ClkTx(iobase, 0, 0);
+ Tdelay(2);
+ ActClk(iobase, 1);
+ Tdelay(1);
+ }
+ ActClk(iobase, 0);
+}
+
+static void ResetDongle(__u16 iobase)
+{
+ int i;
+ ClkTx(iobase, 0, 0);
+ Tdelay(1);
+ for (i = 0; i < 30; i++) {
+ ActClk(iobase, 1);
+ Tdelay(1);
+ ActClk(iobase, 0);
+ Tdelay(1);
+ }
+ ActClk(iobase, 0);
+}
+
+static void SetSITmode(__u16 iobase)
+{
+
+ __u8 bTmp;
+
+ bTmp = ReadLPCReg(0x28);
+ WriteLPCReg(0x28, bTmp | 0x10); //select ITMOFF
+ bTmp = ReadReg(iobase, 0x35);
+ WriteReg(iobase, 0x35, bTmp | 0x40); // Driver ITMOFF
+ WriteReg(iobase, 0x28, bTmp | 0x80); // enable All interrupt
+}
+
+static void SI_SetMode(__u16 iobase, int mode)
+{
+ //__u32 dTmp;
+ __u8 bTmp;
+
+ WriteLPCReg(0x28, 0x70); // S/W Reset
+ SetSITmode(iobase);
+ ResetDongle(iobase);
+ udelay(10);
+ Wr_Indx(iobase, 0x40, 0x0, 0x17); //RX ,APEN enable,Normal power
+ Wr_Indx(iobase, 0x40, 0x1, mode); //Set Mode
+ Wr_Indx(iobase, 0x40, 0x2, 0xff); //Set power to FIR VFIR > 1m
+ bTmp = Rd_Indx(iobase, 0x40, 1);
+}
+
+static void InitCard(__u16 iobase)
+{
+ ResetChip(iobase, 5);
+ WriteReg(iobase, I_ST_CT_0, 0x00); // open CHIP on
+ SetSIRBOF(iobase, 0xc0); // hardware default value
+ SetSIREOF(iobase, 0xc1);
+}
+
+static void CommonInit(__u16 iobase)
+{
+// EnTXCRC(iobase,0);
+ SwapDMA(iobase, OFF);
+ SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
+ EnRXFIFOReadyInt(iobase, OFF);
+ EnRXFIFOHalfLevelInt(iobase, OFF);
+ EnTXFIFOHalfLevelInt(iobase, OFF);
+ EnTXFIFOUnderrunEOMInt(iobase, ON);
+// EnTXFIFOReadyInt(iobase,ON);
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, OFF);
+// WriteLPCReg(0xF0,0); //(if VT1211 then do this)
+ if (IsSIROn(iobase)) {
+ SIRFilter(iobase, ON);
+ SIRRecvAny(iobase, ON);
+ } else {
+ SIRFilter(iobase, OFF);
+ SIRRecvAny(iobase, OFF);
+ }
+ EnRXSpecInt(iobase, ON);
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+ EnableDMA(iobase, ON);
+}
+
+static void SetBaudRate(__u16 iobase, __u32 rate)
+{
+ __u8 value = 11, temp;
+
+ if (IsSIROn(iobase)) {
+ switch (rate) {
+ case (__u32) (2400L):
+ value = 47;
+ break;
+ case (__u32) (9600L):
+ value = 11;
+ break;
+ case (__u32) (19200L):
+ value = 5;
+ break;
+ case (__u32) (38400L):
+ value = 2;
+ break;
+ case (__u32) (57600L):
+ value = 1;
+ break;
+ case (__u32) (115200L):
+ value = 0;
+ break;
+ default:
+ break;
+ };
+ } else if (IsMIROn(iobase)) {
+ value = 0; // will automatically be fixed in 1.152M
+ } else if (IsFIROn(iobase)) {
+ value = 0; // will automatically be fixed in 4M
+ }
+ temp = (ReadReg(iobase, I_CF_H_1) & 0x03);
+ temp |= value << 2;
+ WriteReg(iobase, I_CF_H_1, temp);
+}
+
+static void SetPulseWidth(__u16 iobase, __u8 width)
+{
+ __u8 temp, temp1, temp2;
+
+ temp = (ReadReg(iobase, I_CF_L_1) & 0x1f);
+ temp1 = (ReadReg(iobase, I_CF_H_1) & 0xfc);
+ temp2 = (width & 0x07) << 5;
+ temp |= temp2;
+ temp2 = (width & 0x18) >> 3;
+ temp1 |= temp2;
+ WriteReg(iobase, I_CF_L_1, temp);
+ WriteReg(iobase, I_CF_H_1, temp1);
+}
+
+static void SetSendPreambleCount(__u16 iobase, __u8 count)
+{
+ __u8 temp;
+
+ temp = ReadReg(iobase, I_CF_L_1) & 0xe0;
+ temp |= count;
+ WriteReg(iobase, I_CF_L_1, temp);
+
+}
+
+static void SetVFIR(__u16 BaseAddr, __u8 val)
+{
+ __u8 tmp;
+
+ tmp = ReadReg(BaseAddr, I_CF_L_0);
+ WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
+ WriteRegBit(BaseAddr, I_CF_H_0, 5, val);
+}
+
+static void SetFIR(__u16 BaseAddr, __u8 val)
+{
+ __u8 tmp;
+
+ WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
+ tmp = ReadReg(BaseAddr, I_CF_L_0);
+ WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
+ WriteRegBit(BaseAddr, I_CF_L_0, 6, val);
+}
+
+static void SetMIR(__u16 BaseAddr, __u8 val)
+{
+ __u8 tmp;
+
+ WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
+ tmp = ReadReg(BaseAddr, I_CF_L_0);
+ WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
+ WriteRegBit(BaseAddr, I_CF_L_0, 5, val);
+}
+
+static void SetSIR(__u16 BaseAddr, __u8 val)
+{
+ __u8 tmp;
+
+ WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
+ tmp = ReadReg(BaseAddr, I_CF_L_0);
+ WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
+ WriteRegBit(BaseAddr, I_CF_L_0, 4, val);
+}
+
+#endif /* via_IRCC_H */
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
new file mode 100644
index 000000000000..35fad8171a01
--- /dev/null
+++ b/drivers/net/irda/vlsi_ir.c
@@ -0,0 +1,1912 @@
+/*********************************************************************
+ *
+ * vlsi_ir.c: VLSI82C147 PCI IrDA controller driver for Linux
+ *
+ * Copyright (c) 2001-2003 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME "vlsi_ir"
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_DESCRIPTION "IrDA SIR/MIR/FIR driver for VLSI 82C147"
+#define DRIVER_AUTHOR "Martin Diehl <info@mdiehl.de>"
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+/********************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+#include "vlsi_ir.h"
+
+/********************************************************/
+
+static /* const */ char drivername[] = DRIVER_NAME;
+
+static struct pci_device_id vlsi_irda_table [] = {
+ {
+ .class = PCI_CLASS_WIRELESS_IRDA << 8,
+ .class_mask = PCI_CLASS_SUBCLASS_MASK << 8,
+ .vendor = PCI_VENDOR_ID_VLSI,
+ .device = PCI_DEVICE_ID_VLSI_82C147,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ { /* all zeroes */ }
+};
+
+MODULE_DEVICE_TABLE(pci, vlsi_irda_table);
+
+/********************************************************/
+
+/* clksrc: which clock source to be used
+ * 0: auto - try PLL, fallback to 40MHz XCLK
+ * 1: on-chip 48MHz PLL
+ * 2: external 48MHz XCLK
+ * 3: external 40MHz XCLK (HP OB-800)
+ */
+
+static int clksrc = 0; /* default is 0(auto) */
+module_param(clksrc, int, 0);
+MODULE_PARM_DESC(clksrc, "clock input source selection");
+
+/* ringsize: size of the tx and rx descriptor rings
+ * independent for tx and rx
+ * specify as ringsize=tx[,rx]
+ * allowed values: 4, 8, 16, 32, 64
+ * Due to the IrDA 1.x max. allowed window size=7,
+ * there should be no gain when using rings larger than 8
+ */
+
+static int ringsize[] = {8,8}; /* default is tx=8 / rx=8 */
+module_param_array(ringsize, int, NULL, 0);
+MODULE_PARM_DESC(ringsize, "TX, RX ring descriptor size");
+
+/* sirpulse: tuning of the SIR pulse width within IrPHY 1.3 limits
+ * 0: very short, 1.5us (exception: 6us at 2.4 kbaud)
+ * 1: nominal 3/16 bittime width
+ * note: IrDA compliant peer devices should be happy regardless
+ * which one is used. Primary goal is to save some power
+ * on the sender's side - at 9.6kbaud for example the short
+ * pulse width saves more than 90% of the transmitted IR power.
+ */
+
+static int sirpulse = 1; /* default is 3/16 bittime */
+module_param(sirpulse, int, 0);
+MODULE_PARM_DESC(sirpulse, "SIR pulse width tuning");
+
+/* qos_mtt_bits: encoded min-turn-time value we require the peer device
+ * to use before transmitting to us. "Type 1" (per-station)
+ * bitfield according to IrLAP definition (section 6.6.8)
+ * Don't know which transceiver is used by my OB800 - the
+ * pretty common HP HDLS-1100 requires 1 msec - so lets use this.
+ */
+
+static int qos_mtt_bits = 0x07; /* default is 1 ms or more */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "IrLAP bitfield representing min-turn-time");
+
+/********************************************************/
+
+static void vlsi_reg_debug(unsigned iobase, const char *s)
+{
+ int i;
+
+ printk(KERN_DEBUG "%s: ", s);
+ for (i = 0; i < 0x20; i++)
+ printk("%02x", (unsigned)inb((iobase+i)));
+ printk("\n");
+}
+
+static void vlsi_ring_debug(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i;
+
+ printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
+ __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+ printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__,
+ atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask);
+ for (i = 0; i < r->size; i++) {
+ rd = &r->rd[i];
+ printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i);
+ printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
+ printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n",
+ __FUNCTION__, (unsigned) rd_get_status(rd),
+ (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
+ }
+}
+
+/********************************************************/
+
+/* needed regardless of CONFIG_PROC_FS */
+static struct proc_dir_entry *vlsi_proc_root = NULL;
+
+#ifdef CONFIG_PROC_FS
+
+static void vlsi_proc_pdev(struct seq_file *seq, struct pci_dev *pdev)
+{
+ unsigned iobase = pci_resource_start(pdev, 0);
+ unsigned i;
+
+ seq_printf(seq, "\n%s (vid/did: %04x/%04x)\n",
+ PCIDEV_NAME(pdev), (int)pdev->vendor, (int)pdev->device);
+ seq_printf(seq, "pci-power-state: %u\n", (unsigned) pdev->current_state);
+ seq_printf(seq, "resources: irq=%u / io=0x%04x / dma_mask=0x%016Lx\n",
+ pdev->irq, (unsigned)pci_resource_start(pdev, 0), (unsigned long long)pdev->dma_mask);
+ seq_printf(seq, "hw registers: ");
+ for (i = 0; i < 0x20; i++)
+ seq_printf(seq, "%02x", (unsigned)inb((iobase+i)));
+ seq_printf(seq, "\n");
+}
+
+static void vlsi_proc_ndev(struct seq_file *seq, struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ u8 byte;
+ u16 word;
+ unsigned delta1, delta2;
+ struct timeval now;
+ unsigned iobase = ndev->base_addr;
+
+ seq_printf(seq, "\n%s link state: %s / %s / %s / %s\n", ndev->name,
+ netif_device_present(ndev) ? "attached" : "detached",
+ netif_running(ndev) ? "running" : "not running",
+ netif_carrier_ok(ndev) ? "carrier ok" : "no carrier",
+ netif_queue_stopped(ndev) ? "queue stopped" : "queue running");
+
+ if (!netif_running(ndev))
+ return;
+
+ seq_printf(seq, "\nhw-state:\n");
+ pci_read_config_byte(idev->pdev, VLSI_PCI_IRMISC, &byte);
+ seq_printf(seq, "IRMISC:%s%s%s uart%s",
+ (byte&IRMISC_IRRAIL) ? " irrail" : "",
+ (byte&IRMISC_IRPD) ? " irpd" : "",
+ (byte&IRMISC_UARTTST) ? " uarttest" : "",
+ (byte&IRMISC_UARTEN) ? "@" : " disabled\n");
+ if (byte&IRMISC_UARTEN) {
+ seq_printf(seq, "0x%s\n",
+ (byte&2) ? ((byte&1) ? "3e8" : "2e8")
+ : ((byte&1) ? "3f8" : "2f8"));
+ }
+ pci_read_config_byte(idev->pdev, VLSI_PCI_CLKCTL, &byte);
+ seq_printf(seq, "CLKCTL: PLL %s%s%s / clock %s / wakeup %s\n",
+ (byte&CLKCTL_PD_INV) ? "powered" : "down",
+ (byte&CLKCTL_LOCK) ? " locked" : "",
+ (byte&CLKCTL_EXTCLK) ? ((byte&CLKCTL_XCKSEL)?" / 40 MHz XCLK":" / 48 MHz XCLK") : "",
+ (byte&CLKCTL_CLKSTP) ? "stopped" : "running",
+ (byte&CLKCTL_WAKE) ? "enabled" : "disabled");
+ pci_read_config_byte(idev->pdev, VLSI_PCI_MSTRPAGE, &byte);
+ seq_printf(seq, "MSTRPAGE: 0x%02x\n", (unsigned)byte);
+
+ byte = inb(iobase+VLSI_PIO_IRINTR);
+ seq_printf(seq, "IRINTR:%s%s%s%s%s%s%s%s\n",
+ (byte&IRINTR_ACTEN) ? " ACTEN" : "",
+ (byte&IRINTR_RPKTEN) ? " RPKTEN" : "",
+ (byte&IRINTR_TPKTEN) ? " TPKTEN" : "",
+ (byte&IRINTR_OE_EN) ? " OE_EN" : "",
+ (byte&IRINTR_ACTIVITY) ? " ACTIVITY" : "",
+ (byte&IRINTR_RPKTINT) ? " RPKTINT" : "",
+ (byte&IRINTR_TPKTINT) ? " TPKTINT" : "",
+ (byte&IRINTR_OE_INT) ? " OE_INT" : "");
+ word = inw(iobase+VLSI_PIO_RINGPTR);
+ seq_printf(seq, "RINGPTR: rx=%u / tx=%u\n", RINGPTR_GET_RX(word), RINGPTR_GET_TX(word));
+ word = inw(iobase+VLSI_PIO_RINGBASE);
+ seq_printf(seq, "RINGBASE: busmap=0x%08x\n",
+ ((unsigned)word << 10)|(MSTRPAGE_VALUE<<24));
+ word = inw(iobase+VLSI_PIO_RINGSIZE);
+ seq_printf(seq, "RINGSIZE: rx=%u / tx=%u\n", RINGSIZE_TO_RXSIZE(word),
+ RINGSIZE_TO_TXSIZE(word));
+
+ word = inw(iobase+VLSI_PIO_IRCFG);
+ seq_printf(seq, "IRCFG:%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+ (word&IRCFG_LOOP) ? " LOOP" : "",
+ (word&IRCFG_ENTX) ? " ENTX" : "",
+ (word&IRCFG_ENRX) ? " ENRX" : "",
+ (word&IRCFG_MSTR) ? " MSTR" : "",
+ (word&IRCFG_RXANY) ? " RXANY" : "",
+ (word&IRCFG_CRC16) ? " CRC16" : "",
+ (word&IRCFG_FIR) ? " FIR" : "",
+ (word&IRCFG_MIR) ? " MIR" : "",
+ (word&IRCFG_SIR) ? " SIR" : "",
+ (word&IRCFG_SIRFILT) ? " SIRFILT" : "",
+ (word&IRCFG_SIRTEST) ? " SIRTEST" : "",
+ (word&IRCFG_TXPOL) ? " TXPOL" : "",
+ (word&IRCFG_RXPOL) ? " RXPOL" : "");
+ word = inw(iobase+VLSI_PIO_IRENABLE);
+ seq_printf(seq, "IRENABLE:%s%s%s%s%s%s%s%s\n",
+ (word&IRENABLE_PHYANDCLOCK) ? " PHYANDCLOCK" : "",
+ (word&IRENABLE_CFGER) ? " CFGERR" : "",
+ (word&IRENABLE_FIR_ON) ? " FIR_ON" : "",
+ (word&IRENABLE_MIR_ON) ? " MIR_ON" : "",
+ (word&IRENABLE_SIR_ON) ? " SIR_ON" : "",
+ (word&IRENABLE_ENTXST) ? " ENTXST" : "",
+ (word&IRENABLE_ENRXST) ? " ENRXST" : "",
+ (word&IRENABLE_CRC16_ON) ? " CRC16_ON" : "");
+ word = inw(iobase+VLSI_PIO_PHYCTL);
+ seq_printf(seq, "PHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n",
+ (unsigned)PHYCTL_TO_BAUD(word),
+ (unsigned)PHYCTL_TO_PLSWID(word),
+ (unsigned)PHYCTL_TO_PREAMB(word));
+ word = inw(iobase+VLSI_PIO_NPHYCTL);
+ seq_printf(seq, "NPHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n",
+ (unsigned)PHYCTL_TO_BAUD(word),
+ (unsigned)PHYCTL_TO_PLSWID(word),
+ (unsigned)PHYCTL_TO_PREAMB(word));
+ word = inw(iobase+VLSI_PIO_MAXPKT);
+ seq_printf(seq, "MAXPKT: max. rx packet size = %u\n", word);
+ word = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ seq_printf(seq, "RCVBCNT: rx-fifo filling level = %u\n", word);
+
+ seq_printf(seq, "\nsw-state:\n");
+ seq_printf(seq, "IrPHY setup: %d baud - %s encoding\n", idev->baud,
+ (idev->mode==IFF_SIR)?"SIR":((idev->mode==IFF_MIR)?"MIR":"FIR"));
+ do_gettimeofday(&now);
+ if (now.tv_usec >= idev->last_rx.tv_usec) {
+ delta2 = now.tv_usec - idev->last_rx.tv_usec;
+ delta1 = 0;
+ }
+ else {
+ delta2 = 1000000 + now.tv_usec - idev->last_rx.tv_usec;
+ delta1 = 1;
+ }
+ seq_printf(seq, "last rx: %lu.%06u sec\n",
+ now.tv_sec - idev->last_rx.tv_sec - delta1, delta2);
+
+ seq_printf(seq, "RX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu",
+ idev->stats.rx_packets, idev->stats.rx_bytes, idev->stats.rx_errors,
+ idev->stats.rx_dropped);
+ seq_printf(seq, " / overrun=%lu / length=%lu / frame=%lu / crc=%lu\n",
+ idev->stats.rx_over_errors, idev->stats.rx_length_errors,
+ idev->stats.rx_frame_errors, idev->stats.rx_crc_errors);
+ seq_printf(seq, "TX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu / fifo=%lu\n",
+ idev->stats.tx_packets, idev->stats.tx_bytes, idev->stats.tx_errors,
+ idev->stats.tx_dropped, idev->stats.tx_fifo_errors);
+
+}
+
+static void vlsi_proc_ring(struct seq_file *seq, struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i, j;
+ int h, t;
+
+ seq_printf(seq, "size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
+ r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+ h = atomic_read(&r->head) & r->mask;
+ t = atomic_read(&r->tail) & r->mask;
+ seq_printf(seq, "head = %d / tail = %d ", h, t);
+ if (h == t)
+ seq_printf(seq, "(empty)\n");
+ else {
+ if (((t+1)&r->mask) == h)
+ seq_printf(seq, "(full)\n");
+ else
+ seq_printf(seq, "(level = %d)\n", ((unsigned)(t-h) & r->mask));
+ rd = &r->rd[h];
+ j = (unsigned) rd_get_count(rd);
+ seq_printf(seq, "current: rd = %d / status = %02x / len = %u\n",
+ h, (unsigned)rd_get_status(rd), j);
+ if (j > 0) {
+ seq_printf(seq, " data:");
+ if (j > 20)
+ j = 20;
+ for (i = 0; i < j; i++)
+ seq_printf(seq, " %02x", (unsigned)((unsigned char *)rd->buf)[i]);
+ seq_printf(seq, "\n");
+ }
+ }
+ for (i = 0; i < r->size; i++) {
+ rd = &r->rd[i];
+ seq_printf(seq, "> ring descr %u: ", i);
+ seq_printf(seq, "skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
+ seq_printf(seq, " hw: status=%02x count=%u busaddr=0x%08x\n",
+ (unsigned) rd_get_status(rd),
+ (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
+ }
+}
+
+static int vlsi_seq_show(struct seq_file *seq, void *v)
+{
+ struct net_device *ndev = seq->private;
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned long flags;
+
+ seq_printf(seq, "\n%s %s\n\n", DRIVER_NAME, DRIVER_VERSION);
+ seq_printf(seq, "clksrc: %s\n",
+ (clksrc>=2) ? ((clksrc==3)?"40MHz XCLK":"48MHz XCLK")
+ : ((clksrc==1)?"48MHz PLL":"autodetect"));
+ seq_printf(seq, "ringsize: tx=%d / rx=%d\n",
+ ringsize[0], ringsize[1]);
+ seq_printf(seq, "sirpulse: %s\n", (sirpulse)?"3/16 bittime":"short");
+ seq_printf(seq, "qos_mtt_bits: 0x%02x\n", (unsigned)qos_mtt_bits);
+
+ spin_lock_irqsave(&idev->lock, flags);
+ if (idev->pdev != NULL) {
+ vlsi_proc_pdev(seq, idev->pdev);
+
+ if (idev->pdev->current_state == 0)
+ vlsi_proc_ndev(seq, ndev);
+ else
+ seq_printf(seq, "\nPCI controller down - resume_ok = %d\n",
+ idev->resume_ok);
+ if (netif_running(ndev) && idev->rx_ring && idev->tx_ring) {
+ seq_printf(seq, "\n--------- RX ring -----------\n\n");
+ vlsi_proc_ring(seq, idev->rx_ring);
+ seq_printf(seq, "\n--------- TX ring -----------\n\n");
+ vlsi_proc_ring(seq, idev->tx_ring);
+ }
+ }
+ seq_printf(seq, "\n");
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ return 0;
+}
+
+static int vlsi_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, vlsi_seq_show, PDE(inode)->data);
+}
+
+static struct file_operations vlsi_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = vlsi_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+#define VLSI_PROC_FOPS (&vlsi_proc_fops)
+
+#else /* CONFIG_PROC_FS */
+#define VLSI_PROC_FOPS NULL
+#endif
+
+/********************************************************/
+
+static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr_hw *hwmap,
+ unsigned size, unsigned len, int dir)
+{
+ struct vlsi_ring *r;
+ struct ring_descr *rd;
+ unsigned i, j;
+ dma_addr_t busaddr;
+
+ if (!size || ((size-1)&size)!=0) /* must be >0 and power of 2 */
+ return NULL;
+
+ r = kmalloc(sizeof(*r) + size * sizeof(struct ring_descr), GFP_KERNEL);
+ if (!r)
+ return NULL;
+ memset(r, 0, sizeof(*r));
+
+ r->pdev = pdev;
+ r->dir = dir;
+ r->len = len;
+ r->rd = (struct ring_descr *)(r+1);
+ r->mask = size - 1;
+ r->size = size;
+ atomic_set(&r->head, 0);
+ atomic_set(&r->tail, 0);
+
+ for (i = 0; i < size; i++) {
+ rd = r->rd + i;
+ memset(rd, 0, sizeof(*rd));
+ rd->hw = hwmap + i;
+ rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
+ if (rd->buf == NULL
+ || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+ if (rd->buf) {
+ IRDA_ERROR("%s: failed to create PCI-MAP for %p",
+ __FUNCTION__, rd->buf);
+ kfree(rd->buf);
+ rd->buf = NULL;
+ }
+ for (j = 0; j < i; j++) {
+ rd = r->rd + j;
+ busaddr = rd_get_addr(rd);
+ rd_set_addr_status(rd, 0, 0);
+ if (busaddr)
+ pci_unmap_single(pdev, busaddr, len, dir);
+ kfree(rd->buf);
+ rd->buf = NULL;
+ }
+ kfree(r);
+ return NULL;
+ }
+ rd_set_addr_status(rd, busaddr, 0);
+ /* initially, the dma buffer is owned by the CPU */
+ rd->skb = NULL;
+ }
+ return r;
+}
+
+static int vlsi_free_ring(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i;
+ dma_addr_t busaddr;
+
+ for (i = 0; i < r->size; i++) {
+ rd = r->rd + i;
+ if (rd->skb)
+ dev_kfree_skb_any(rd->skb);
+ busaddr = rd_get_addr(rd);
+ rd_set_addr_status(rd, 0, 0);
+ if (busaddr)
+ pci_unmap_single(r->pdev, busaddr, r->len, r->dir);
+ if (rd->buf)
+ kfree(rd->buf);
+ }
+ kfree(r);
+ return 0;
+}
+
+static int vlsi_create_hwif(vlsi_irda_dev_t *idev)
+{
+ char *ringarea;
+ struct ring_descr_hw *hwmap;
+
+ idev->virtaddr = NULL;
+ idev->busaddr = 0;
+
+ ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr);
+ if (!ringarea) {
+ IRDA_ERROR("%s: insufficient memory for descriptor rings\n",
+ __FUNCTION__);
+ goto out;
+ }
+ memset(ringarea, 0, HW_RING_AREA_SIZE);
+
+ hwmap = (struct ring_descr_hw *)ringarea;
+ idev->rx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[1],
+ XFER_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ if (idev->rx_ring == NULL)
+ goto out_unmap;
+
+ hwmap += MAX_RING_DESCR;
+ idev->tx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[0],
+ XFER_BUF_SIZE, PCI_DMA_TODEVICE);
+ if (idev->tx_ring == NULL)
+ goto out_free_rx;
+
+ idev->virtaddr = ringarea;
+ return 0;
+
+out_free_rx:
+ vlsi_free_ring(idev->rx_ring);
+out_unmap:
+ idev->rx_ring = idev->tx_ring = NULL;
+ pci_free_consistent(idev->pdev, HW_RING_AREA_SIZE, ringarea, idev->busaddr);
+ idev->busaddr = 0;
+out:
+ return -ENOMEM;
+}
+
+static int vlsi_destroy_hwif(vlsi_irda_dev_t *idev)
+{
+ vlsi_free_ring(idev->rx_ring);
+ vlsi_free_ring(idev->tx_ring);
+ idev->rx_ring = idev->tx_ring = NULL;
+
+ if (idev->busaddr)
+ pci_free_consistent(idev->pdev,HW_RING_AREA_SIZE,idev->virtaddr,idev->busaddr);
+
+ idev->virtaddr = NULL;
+ idev->busaddr = 0;
+
+ return 0;
+}
+
+/********************************************************/
+
+static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
+{
+ u16 status;
+ int crclen, len = 0;
+ struct sk_buff *skb;
+ int ret = 0;
+ struct net_device *ndev = (struct net_device *)pci_get_drvdata(r->pdev);
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ /* dma buffer now owned by the CPU */
+ status = rd_get_status(rd);
+ if (status & RD_RX_ERROR) {
+ if (status & RD_RX_OVER)
+ ret |= VLSI_RX_OVER;
+ if (status & RD_RX_LENGTH)
+ ret |= VLSI_RX_LENGTH;
+ if (status & RD_RX_PHYERR)
+ ret |= VLSI_RX_FRAME;
+ if (status & RD_RX_CRCERR)
+ ret |= VLSI_RX_CRC;
+ goto done;
+ }
+
+ len = rd_get_count(rd);
+ crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
+ len -= crclen; /* remove trailing CRC */
+ if (len <= 0) {
+ IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len);
+ ret |= VLSI_RX_DROP;
+ goto done;
+ }
+
+ if (idev->mode == IFF_SIR) { /* hw checks CRC in MIR, FIR mode */
+
+ /* rd->buf is a streaming PCI_DMA_FROMDEVICE map. Doing the
+ * endian-adjustment there just in place will dirty a cache line
+ * which belongs to the map and thus we must be sure it will
+ * get flushed before giving the buffer back to hardware.
+ * vlsi_fill_rx() will do this anyway - but here we rely on.
+ */
+ le16_to_cpus(rd->buf+len);
+ if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
+ IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__);
+ ret |= VLSI_RX_CRC;
+ goto done;
+ }
+ }
+
+ if (!rd->skb) {
+ IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__);
+ ret |= VLSI_RX_DROP;
+ goto done;
+ }
+
+ skb = rd->skb;
+ rd->skb = NULL;
+ skb->dev = ndev;
+ memcpy(skb_put(skb,len), rd->buf, len);
+ skb->mac.raw = skb->data;
+ if (in_interrupt())
+ netif_rx(skb);
+ else
+ netif_rx_ni(skb);
+ ndev->last_rx = jiffies;
+
+done:
+ rd_set_status(rd, 0);
+ rd_set_count(rd, 0);
+ /* buffer still owned by CPU */
+
+ return (ret) ? -ret : len;
+}
+
+static void vlsi_fill_rx(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+
+ for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) {
+ if (rd_is_active(rd)) {
+ IRDA_WARNING("%s: driver bug: rx descr race with hw\n",
+ __FUNCTION__);
+ vlsi_ring_debug(r);
+ break;
+ }
+ if (!rd->skb) {
+ rd->skb = dev_alloc_skb(IRLAP_SKB_ALLOCSIZE);
+ if (rd->skb) {
+ skb_reserve(rd->skb,1);
+ rd->skb->protocol = htons(ETH_P_IRDA);
+ }
+ else
+ break; /* probably not worth logging? */
+ }
+ /* give dma buffer back to busmaster */
+ pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ rd_activate(rd);
+ }
+}
+
+static void vlsi_rx_interrupt(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->rx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ if (rd_is_active(rd))
+ break;
+
+ ret = vlsi_process_rx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.rx_errors++;
+ if (ret & VLSI_RX_DROP)
+ idev->stats.rx_dropped++;
+ if (ret & VLSI_RX_OVER)
+ idev->stats.rx_over_errors++;
+ if (ret & VLSI_RX_LENGTH)
+ idev->stats.rx_length_errors++;
+ if (ret & VLSI_RX_FRAME)
+ idev->stats.rx_frame_errors++;
+ if (ret & VLSI_RX_CRC)
+ idev->stats.rx_crc_errors++;
+ }
+ else if (ret > 0) {
+ idev->stats.rx_packets++;
+ idev->stats.rx_bytes += ret;
+ }
+ }
+
+ do_gettimeofday(&idev->last_rx); /* remember "now" for later mtt delay */
+
+ vlsi_fill_rx(r);
+
+ if (ring_first(r) == NULL) {
+ /* we are in big trouble, if this should ever happen */
+ IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__);
+ vlsi_ring_debug(r);
+ }
+ else
+ outw(0, ndev->base_addr+VLSI_PIO_PROMPT);
+}
+
+/* caller must have stopped the controller from busmastering */
+
+static void vlsi_unarm_rx(vlsi_irda_dev_t *idev)
+{
+ struct vlsi_ring *r = idev->rx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ ret = 0;
+ if (rd_is_active(rd)) {
+ rd_set_status(rd, 0);
+ if (rd_get_count(rd)) {
+ IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__);
+ ret = -VLSI_RX_DROP;
+ }
+ rd_set_count(rd, 0);
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ if (rd->skb) {
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ }
+ else
+ ret = vlsi_process_rx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.rx_errors++;
+ if (ret & VLSI_RX_DROP)
+ idev->stats.rx_dropped++;
+ if (ret & VLSI_RX_OVER)
+ idev->stats.rx_over_errors++;
+ if (ret & VLSI_RX_LENGTH)
+ idev->stats.rx_length_errors++;
+ if (ret & VLSI_RX_FRAME)
+ idev->stats.rx_frame_errors++;
+ if (ret & VLSI_RX_CRC)
+ idev->stats.rx_crc_errors++;
+ }
+ else if (ret > 0) {
+ idev->stats.rx_packets++;
+ idev->stats.rx_bytes += ret;
+ }
+ }
+}
+
+/********************************************************/
+
+static int vlsi_process_tx(struct vlsi_ring *r, struct ring_descr *rd)
+{
+ u16 status;
+ int len;
+ int ret;
+
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ /* dma buffer now owned by the CPU */
+ status = rd_get_status(rd);
+ if (status & RD_TX_UNDRN)
+ ret = VLSI_TX_FIFO;
+ else
+ ret = 0;
+ rd_set_status(rd, 0);
+
+ if (rd->skb) {
+ len = rd->skb->len;
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ else /* tx-skb already freed? - should never happen */
+ len = rd_get_count(rd); /* incorrect for SIR! (due to wrapping) */
+
+ rd_set_count(rd, 0);
+ /* dma buffer still owned by the CPU */
+
+ return (ret) ? -ret : len;
+}
+
+static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
+{
+ u16 nphyctl;
+ u16 config;
+ unsigned mode;
+ int ret;
+ int baudrate;
+ int fifocnt;
+
+ baudrate = idev->new_baud;
+ IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud);
+ if (baudrate == 4000000) {
+ mode = IFF_FIR;
+ config = IRCFG_FIR;
+ nphyctl = PHYCTL_FIR;
+ }
+ else if (baudrate == 1152000) {
+ mode = IFF_MIR;
+ config = IRCFG_MIR | IRCFG_CRC16;
+ nphyctl = PHYCTL_MIR(clksrc==3);
+ }
+ else {
+ mode = IFF_SIR;
+ config = IRCFG_SIR | IRCFG_SIRFILT | IRCFG_RXANY;
+ switch(baudrate) {
+ default:
+ IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n",
+ __FUNCTION__, baudrate);
+ baudrate = 9600;
+ /* fallthru */
+ case 2400:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ nphyctl = PHYCTL_SIR(baudrate,sirpulse,clksrc==3);
+ break;
+ }
+ }
+ config |= IRCFG_MSTR | IRCFG_ENRX;
+
+ fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+ }
+
+ outw(0, iobase+VLSI_PIO_IRENABLE);
+ outw(config, iobase+VLSI_PIO_IRCFG);
+ outw(nphyctl, iobase+VLSI_PIO_NPHYCTL);
+ wmb();
+ outw(IRENABLE_PHYANDCLOCK, iobase+VLSI_PIO_IRENABLE);
+ mb();
+
+ udelay(1); /* chip applies IRCFG on next rising edge of its 8MHz clock */
+
+ /* read back settings for validation */
+
+ config = inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_MASK;
+
+ if (mode == IFF_FIR)
+ config ^= IRENABLE_FIR_ON;
+ else if (mode == IFF_MIR)
+ config ^= (IRENABLE_MIR_ON|IRENABLE_CRC16_ON);
+ else
+ config ^= IRENABLE_SIR_ON;
+
+ if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) {
+ IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__,
+ (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR"));
+ ret = -1;
+ }
+ else {
+ if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) {
+ IRDA_WARNING("%s: failed to apply baudrate %d\n",
+ __FUNCTION__, baudrate);
+ ret = -1;
+ }
+ else {
+ idev->mode = mode;
+ idev->baud = baudrate;
+ idev->new_baud = 0;
+ ret = 0;
+ }
+ }
+
+ if (ret)
+ vlsi_reg_debug(iobase,__FUNCTION__);
+
+ return ret;
+}
+
+static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ unsigned long flags;
+ unsigned iobase = ndev->base_addr;
+ u8 status;
+ u16 config;
+ int mtt;
+ int len, speed;
+ struct timeval now, ready;
+ char *msg = NULL;
+
+ speed = irda_get_next_speed(skb);
+ spin_lock_irqsave(&idev->lock, flags);
+ if (speed != -1 && speed != idev->baud) {
+ netif_stop_queue(ndev);
+ idev->new_baud = speed;
+ status = RD_TX_CLRENTX; /* stop tx-ring after this frame */
+ }
+ else
+ status = 0;
+
+ if (skb->len == 0) {
+ /* handle zero packets - should be speed change */
+ if (status == 0) {
+ msg = "bogus zero-length packet";
+ goto drop_unlock;
+ }
+
+ /* due to the completely asynch tx operation we might have
+ * IrLAP racing with the hardware here, f.e. if the controller
+ * is just sending the last packet with current speed while
+ * the LAP is already switching the speed using synchronous
+ * len=0 packet. Immediate execution would lead to hw lockup
+ * requiring a powercycle to reset. Good candidate to trigger
+ * this is the final UA:RSP packet after receiving a DISC:CMD
+ * when getting the LAP down.
+ * Note that we are not protected by the queue_stop approach
+ * because the final UA:RSP arrives _without_ request to apply
+ * new-speed-after-this-packet - hence the driver doesn't know
+ * this was the last packet and doesn't stop the queue. So the
+ * forced switch to default speed from LAP gets through as fast
+ * as only some 10 usec later while the UA:RSP is still processed
+ * by the hardware and we would get screwed.
+ */
+
+ if (ring_first(idev->tx_ring) == NULL) {
+ /* no race - tx-ring already empty */
+ vlsi_set_baud(idev, iobase);
+ netif_wake_queue(ndev);
+ }
+ else
+ ;
+ /* keep the speed change pending like it would
+ * for any len>0 packet. tx completion interrupt
+ * will apply it when the tx ring becomes empty.
+ */
+ spin_unlock_irqrestore(&idev->lock, flags);
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ /* sanity checks - simply drop the packet */
+
+ rd = ring_last(r);
+ if (!rd) {
+ msg = "ring full, but queue wasn't stopped";
+ goto drop_unlock;
+ }
+
+ if (rd_is_active(rd)) {
+ msg = "entry still owned by hw";
+ goto drop_unlock;
+ }
+
+ if (!rd->buf) {
+ msg = "tx ring entry without pci buffer";
+ goto drop_unlock;
+ }
+
+ if (rd->skb) {
+ msg = "ring entry with old skb still attached";
+ goto drop_unlock;
+ }
+
+ /* no need for serialization or interrupt disable during mtt */
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ if ((mtt = irda_get_mtt(skb)) > 0) {
+
+ ready.tv_usec = idev->last_rx.tv_usec + mtt;
+ ready.tv_sec = idev->last_rx.tv_sec;
+ if (ready.tv_usec >= 1000000) {
+ ready.tv_usec -= 1000000;
+ ready.tv_sec++; /* IrLAP 1.1: mtt always < 1 sec */
+ }
+ for(;;) {
+ do_gettimeofday(&now);
+ if (now.tv_sec > ready.tv_sec
+ || (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
+ break;
+ udelay(100);
+ /* must not sleep here - we are called under xmit_lock! */
+ }
+ }
+
+ /* tx buffer already owned by CPU due to pci_dma_sync_single_for_cpu()
+ * after subsequent tx-completion
+ */
+
+ if (idev->mode == IFF_SIR) {
+ status |= RD_TX_DISCRC; /* no hw-crc creation */
+ len = async_wrap_skb(skb, rd->buf, r->len);
+
+ /* Some rare worst case situation in SIR mode might lead to
+ * potential buffer overflow. The wrapper detects this, returns
+ * with a shortened frame (without FCS/EOF) but doesn't provide
+ * any error indication about the invalid packet which we are
+ * going to transmit.
+ * Therefore we log if the buffer got filled to the point, where the
+ * wrapper would abort, i.e. when there are less than 5 bytes left to
+ * allow appending the FCS/EOF.
+ */
+
+ if (len >= r->len-5)
+ IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n",
+ __FUNCTION__);
+ }
+ else {
+ /* hw deals with MIR/FIR mode wrapping */
+ status |= RD_TX_PULSE; /* send 2 us highspeed indication pulse */
+ len = skb->len;
+ if (len > r->len) {
+ msg = "frame exceeds tx buffer length";
+ goto drop;
+ }
+ else
+ memcpy(rd->buf, skb->data, len);
+ }
+
+ rd->skb = skb; /* remember skb for tx-complete stats */
+
+ rd_set_count(rd, len);
+ rd_set_status(rd, status); /* not yet active! */
+
+ /* give dma buffer back to busmaster-hw (flush caches to make
+ * CPU-driven changes visible from the pci bus).
+ */
+
+ pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir);
+
+/* Switching to TX mode here races with the controller
+ * which may stop TX at any time when fetching an inactive descriptor
+ * or one with CLR_ENTX set. So we switch on TX only, if TX was not running
+ * _after_ the new descriptor was activated on the ring. This ensures
+ * we will either find TX already stopped or we can be sure, there
+ * will be a TX-complete interrupt even if the chip stopped doing
+ * TX just after we found it still running. The ISR will then find
+ * the non-empty ring and restart TX processing. The enclosing
+ * spinlock provides the correct serialization to prevent race with isr.
+ */
+
+ spin_lock_irqsave(&idev->lock,flags);
+
+ rd_activate(rd);
+
+ if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) {
+ int fifocnt;
+
+ fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+ }
+
+ config = inw(iobase+VLSI_PIO_IRCFG);
+ mb();
+ outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
+ wmb();
+ outw(0, iobase+VLSI_PIO_PROMPT);
+ }
+ ndev->trans_start = jiffies;
+
+ if (ring_put(r) == NULL) {
+ netif_stop_queue(ndev);
+ IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__);
+ }
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ return 0;
+
+drop_unlock:
+ spin_unlock_irqrestore(&idev->lock, flags);
+drop:
+ IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg);
+ dev_kfree_skb_any(skb);
+ idev->stats.tx_errors++;
+ idev->stats.tx_dropped++;
+ /* Don't even think about returning NET_XMIT_DROP (=1) here!
+ * In fact any retval!=0 causes the packet scheduler to requeue the
+ * packet for later retry of transmission - which isn't exactly
+ * what we want after we've just called dev_kfree_skb_any ;-)
+ */
+ return 0;
+}
+
+static void vlsi_tx_interrupt(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ unsigned iobase;
+ int ret;
+ u16 config;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ if (rd_is_active(rd))
+ break;
+
+ ret = vlsi_process_tx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.tx_errors++;
+ if (ret & VLSI_TX_DROP)
+ idev->stats.tx_dropped++;
+ if (ret & VLSI_TX_FIFO)
+ idev->stats.tx_fifo_errors++;
+ }
+ else if (ret > 0){
+ idev->stats.tx_packets++;
+ idev->stats.tx_bytes += ret;
+ }
+ }
+
+ iobase = ndev->base_addr;
+
+ if (idev->new_baud && rd == NULL) /* tx ring empty and speed change pending */
+ vlsi_set_baud(idev, iobase);
+
+ config = inw(iobase+VLSI_PIO_IRCFG);
+ if (rd == NULL) /* tx ring empty: re-enable rx */
+ outw((config & ~IRCFG_ENTX) | IRCFG_ENRX, iobase+VLSI_PIO_IRCFG);
+
+ else if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) {
+ int fifocnt;
+
+ fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
+ __FUNCTION__, fifocnt);
+ }
+ outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
+ }
+
+ outw(0, iobase+VLSI_PIO_PROMPT);
+
+ if (netif_queue_stopped(ndev) && !idev->new_baud) {
+ netif_wake_queue(ndev);
+ IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__);
+ }
+}
+
+/* caller must have stopped the controller from busmastering */
+
+static void vlsi_unarm_tx(vlsi_irda_dev_t *idev)
+{
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ ret = 0;
+ if (rd_is_active(rd)) {
+ rd_set_status(rd, 0);
+ rd_set_count(rd, 0);
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ if (rd->skb) {
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__);
+ ret = -VLSI_TX_DROP;
+ }
+ else
+ ret = vlsi_process_tx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.tx_errors++;
+ if (ret & VLSI_TX_DROP)
+ idev->stats.tx_dropped++;
+ if (ret & VLSI_TX_FIFO)
+ idev->stats.tx_fifo_errors++;
+ }
+ else if (ret > 0){
+ idev->stats.tx_packets++;
+ idev->stats.tx_bytes += ret;
+ }
+ }
+
+}
+
+/********************************************************/
+
+static int vlsi_start_clock(struct pci_dev *pdev)
+{
+ u8 clkctl, lock;
+ int i, count;
+
+ if (clksrc < 2) { /* auto or PLL: try PLL */
+ clkctl = CLKCTL_PD_INV | CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* procedure to detect PLL lock synchronisation:
+ * after 0.5 msec initial delay we expect to find 3 PLL lock
+ * indications within 10 msec for successful PLL detection.
+ */
+ udelay(500);
+ count = 0;
+ for (i = 500; i <= 10000; i += 50) { /* max 10 msec */
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &lock);
+ if (lock&CLKCTL_LOCK) {
+ if (++count >= 3)
+ break;
+ }
+ udelay(50);
+ }
+ if (count < 3) {
+ if (clksrc == 1) { /* explicitly asked for PLL hence bail out */
+ IRDA_ERROR("%s: no PLL or failed to lock!\n",
+ __FUNCTION__);
+ clkctl = CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+ return -1;
+ }
+ else /* was: clksrc=0(auto) */
+ clksrc = 3; /* fallback to 40MHz XCLK (OB800) */
+
+ IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
+ __FUNCTION__, clksrc);
+ }
+ else
+ clksrc = 1; /* got successful PLL lock */
+ }
+
+ if (clksrc != 1) {
+ /* we get here if either no PLL detected in auto-mode or
+ an external clock source was explicitly specified */
+
+ clkctl = CLKCTL_EXTCLK | CLKCTL_CLKSTP;
+ if (clksrc == 3)
+ clkctl |= CLKCTL_XCKSEL;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* no way to test for working XCLK */
+ }
+ else
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl);
+
+ /* ok, now going to connect the chip with the clock source */
+
+ clkctl &= ~CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ return 0;
+}
+
+static void vlsi_stop_clock(struct pci_dev *pdev)
+{
+ u8 clkctl;
+
+ /* disconnect chip from clock source */
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl);
+ clkctl |= CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* disable all clock sources */
+ clkctl &= ~(CLKCTL_EXTCLK | CLKCTL_PD_INV);
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+}
+
+/********************************************************/
+
+/* writing all-zero to the VLSI PCI IO register area seems to prevent
+ * some occasional situations where the hardware fails (symptoms are
+ * what appears as stalled tx/rx state machines, i.e. everything ok for
+ * receive or transmit but hw makes no progress or is unable to access
+ * the bus memory locations).
+ * Best place to call this is immediately after/before the internal clock
+ * gets started/stopped.
+ */
+
+static inline void vlsi_clear_regs(unsigned iobase)
+{
+ unsigned i;
+ const unsigned chip_io_extent = 32;
+
+ for (i = 0; i < chip_io_extent; i += sizeof(u16))
+ outw(0, iobase + i);
+}
+
+static int vlsi_init_chip(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned iobase;
+ u16 ptr;
+
+ /* start the clock and clean the registers */
+
+ if (vlsi_start_clock(pdev)) {
+ IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__);
+ return -1;
+ }
+ iobase = ndev->base_addr;
+ vlsi_clear_regs(iobase);
+
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* w/c pending IRQ, disable all INT */
+
+ outw(0, iobase+VLSI_PIO_IRENABLE); /* disable IrPHY-interface */
+
+ /* disable everything, particularly IRCFG_MSTR - (also resetting the RING_PTR) */
+
+ outw(0, iobase+VLSI_PIO_IRCFG);
+ wmb();
+
+ outw(MAX_PACKET_LENGTH, iobase+VLSI_PIO_MAXPKT); /* max possible value=0x0fff */
+
+ outw(BUS_TO_RINGBASE(idev->busaddr), iobase+VLSI_PIO_RINGBASE);
+
+ outw(TX_RX_TO_RINGSIZE(idev->tx_ring->size, idev->rx_ring->size),
+ iobase+VLSI_PIO_RINGSIZE);
+
+ ptr = inw(iobase+VLSI_PIO_RINGPTR);
+ atomic_set(&idev->rx_ring->head, RINGPTR_GET_RX(ptr));
+ atomic_set(&idev->rx_ring->tail, RINGPTR_GET_RX(ptr));
+ atomic_set(&idev->tx_ring->head, RINGPTR_GET_TX(ptr));
+ atomic_set(&idev->tx_ring->tail, RINGPTR_GET_TX(ptr));
+
+ vlsi_set_baud(idev, iobase); /* idev->new_baud used as provided by caller */
+
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* just in case - w/c pending IRQ's */
+ wmb();
+
+ /* DO NOT BLINDLY ENABLE IRINTR_ACTEN!
+ * basically every received pulse fires an ACTIVITY-INT
+ * leading to >>1000 INT's per second instead of few 10
+ */
+
+ outb(IRINTR_RPKTEN|IRINTR_TPKTEN, iobase+VLSI_PIO_IRINTR);
+
+ return 0;
+}
+
+static int vlsi_start_hw(vlsi_irda_dev_t *idev)
+{
+ struct pci_dev *pdev = idev->pdev;
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ unsigned iobase = ndev->base_addr;
+ u8 byte;
+
+ /* we don't use the legacy UART, disable its address decoding */
+
+ pci_read_config_byte(pdev, VLSI_PCI_IRMISC, &byte);
+ byte &= ~(IRMISC_UARTEN | IRMISC_UARTTST);
+ pci_write_config_byte(pdev, VLSI_PCI_IRMISC, byte);
+
+ /* enable PCI busmaster access to our 16MB page */
+
+ pci_write_config_byte(pdev, VLSI_PCI_MSTRPAGE, MSTRPAGE_VALUE);
+ pci_set_master(pdev);
+
+ if (vlsi_init_chip(pdev) < 0) {
+ pci_disable_device(pdev);
+ return -1;
+ }
+
+ vlsi_fill_rx(idev->rx_ring);
+
+ do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */
+
+ outw(0, iobase+VLSI_PIO_PROMPT); /* kick hw state machine */
+
+ return 0;
+}
+
+static int vlsi_stop_hw(vlsi_irda_dev_t *idev)
+{
+ struct pci_dev *pdev = idev->pdev;
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ unsigned iobase = ndev->base_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&idev->lock,flags);
+ outw(0, iobase+VLSI_PIO_IRENABLE);
+ outw(0, iobase+VLSI_PIO_IRCFG); /* disable everything */
+
+ /* disable and w/c irqs */
+ outb(0, iobase+VLSI_PIO_IRINTR);
+ wmb();
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR);
+ spin_unlock_irqrestore(&idev->lock,flags);
+
+ vlsi_unarm_tx(idev);
+ vlsi_unarm_rx(idev);
+
+ vlsi_clear_regs(iobase);
+ vlsi_stop_clock(pdev);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+/**************************************************************/
+
+static struct net_device_stats * vlsi_get_stats(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ return &idev->stats;
+}
+
+static void vlsi_tx_timeout(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+
+ vlsi_reg_debug(ndev->base_addr, __FUNCTION__);
+ vlsi_ring_debug(idev->tx_ring);
+
+ if (netif_running(ndev))
+ netif_stop_queue(ndev);
+
+ vlsi_stop_hw(idev);
+
+ /* now simply restart the whole thing */
+
+ if (!idev->new_baud)
+ idev->new_baud = idev->baud; /* keep current baudrate */
+
+ if (vlsi_start_hw(idev))
+ IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
+ __FUNCTION__, PCIDEV_NAME(idev->pdev), ndev->name);
+ else
+ netif_start_queue(ndev);
+}
+
+static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ unsigned long flags;
+ u16 fifocnt;
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ spin_lock_irqsave(&idev->lock, flags);
+ idev->new_baud = irq->ifr_baudrate;
+ /* when called from userland there might be a minor race window here
+ * if the stack tries to change speed concurrently - which would be
+ * pretty strange anyway with the userland having full control...
+ */
+ vlsi_set_baud(idev, ndev->base_addr);
+ spin_unlock_irqrestore(&idev->lock, flags);
+ break;
+ case SIOCSMEDIABUSY:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ irda_device_set_media_busy(ndev, TRUE);
+ break;
+ case SIOCGRECEIVING:
+ /* the best we can do: check whether there are any bytes in rx fifo.
+ * The trustable window (in case some data arrives just afterwards)
+ * may be as short as 1usec or so at 4Mbps.
+ */
+ fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ irq->ifr_receiving = (fifocnt!=0) ? 1 : 0;
+ break;
+ default:
+ IRDA_WARNING("%s: notsupp - cmd=%04x\n",
+ __FUNCTION__, cmd);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/********************************************************/
+
+static irqreturn_t vlsi_interrupt(int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct net_device *ndev = dev_instance;
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned iobase;
+ u8 irintr;
+ int boguscount = 5;
+ unsigned long flags;
+ int handled = 0;
+
+ iobase = ndev->base_addr;
+ spin_lock_irqsave(&idev->lock,flags);
+ do {
+ irintr = inb(iobase+VLSI_PIO_IRINTR);
+ mb();
+ outb(irintr, iobase+VLSI_PIO_IRINTR); /* acknowledge asap */
+
+ if (!(irintr&=IRINTR_INT_MASK)) /* not our INT - probably shared */
+ break;
+
+ handled = 1;
+
+ if (unlikely(!(irintr & ~IRINTR_ACTIVITY)))
+ break; /* nothing todo if only activity */
+
+ if (irintr&IRINTR_RPKTINT)
+ vlsi_rx_interrupt(ndev);
+
+ if (irintr&IRINTR_TPKTINT)
+ vlsi_tx_interrupt(ndev);
+
+ } while (--boguscount > 0);
+ spin_unlock_irqrestore(&idev->lock,flags);
+
+ if (boguscount <= 0)
+ IRDA_MESSAGE("%s: too much work in interrupt!\n",
+ __FUNCTION__);
+ return IRQ_RETVAL(handled);
+}
+
+/********************************************************/
+
+static int vlsi_open(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ int err = -EAGAIN;
+ char hwname[32];
+
+ if (pci_request_regions(idev->pdev, drivername)) {
+ IRDA_WARNING("%s: io resource busy\n", __FUNCTION__);
+ goto errout;
+ }
+ ndev->base_addr = pci_resource_start(idev->pdev,0);
+ ndev->irq = idev->pdev->irq;
+
+ /* under some rare occasions the chip apparently comes up with
+ * IRQ's pending. We better w/c pending IRQ and disable them all
+ */
+
+ outb(IRINTR_INT_MASK, ndev->base_addr+VLSI_PIO_IRINTR);
+
+ if (request_irq(ndev->irq, vlsi_interrupt, SA_SHIRQ,
+ drivername, ndev)) {
+ IRDA_WARNING("%s: couldn't get IRQ: %d\n",
+ __FUNCTION__, ndev->irq);
+ goto errout_io;
+ }
+
+ if ((err = vlsi_create_hwif(idev)) != 0)
+ goto errout_irq;
+
+ sprintf(hwname, "VLSI-FIR @ 0x%04x", (unsigned)ndev->base_addr);
+ idev->irlap = irlap_open(ndev,&idev->qos,hwname);
+ if (!idev->irlap)
+ goto errout_free_ring;
+
+ do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */
+
+ idev->new_baud = 9600; /* start with IrPHY using 9600(SIR) mode */
+
+ if ((err = vlsi_start_hw(idev)) != 0)
+ goto errout_close_irlap;
+
+ netif_start_queue(ndev);
+
+ IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name);
+
+ return 0;
+
+errout_close_irlap:
+ irlap_close(idev->irlap);
+errout_free_ring:
+ vlsi_destroy_hwif(idev);
+errout_irq:
+ free_irq(ndev->irq,ndev);
+errout_io:
+ pci_release_regions(idev->pdev);
+errout:
+ return err;
+}
+
+static int vlsi_close(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ netif_stop_queue(ndev);
+
+ if (idev->irlap)
+ irlap_close(idev->irlap);
+ idev->irlap = NULL;
+
+ vlsi_stop_hw(idev);
+
+ vlsi_destroy_hwif(idev);
+
+ free_irq(ndev->irq,ndev);
+
+ pci_release_regions(idev->pdev);
+
+ IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name);
+
+ return 0;
+}
+
+static int vlsi_irda_init(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct pci_dev *pdev = idev->pdev;
+
+ SET_MODULE_OWNER(ndev);
+
+ ndev->irq = pdev->irq;
+ ndev->base_addr = pci_resource_start(pdev,0);
+
+ /* PCI busmastering
+ * see include file for details why we need these 2 masks, in this order!
+ */
+
+ if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
+ || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
+ IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__);
+ return -1;
+ }
+
+ irda_init_max_qos_capabilies(&idev->qos);
+
+ /* the VLSI82C147 does not support 576000! */
+
+ idev->qos.baud_rate.bits = IR_2400 | IR_9600
+ | IR_19200 | IR_38400 | IR_57600 | IR_115200
+ | IR_1152000 | (IR_4000000 << 8);
+
+ idev->qos.min_turn_time.bits = qos_mtt_bits;
+
+ irda_qos_bits_to_value(&idev->qos);
+
+ /* currently no public media definitions for IrDA */
+
+ ndev->flags |= IFF_PORTSEL | IFF_AUTOMEDIA;
+ ndev->if_port = IF_PORT_UNKNOWN;
+
+ ndev->open = vlsi_open;
+ ndev->stop = vlsi_close;
+ ndev->get_stats = vlsi_get_stats;
+ ndev->hard_start_xmit = vlsi_hard_start_xmit;
+ ndev->do_ioctl = vlsi_ioctl;
+ ndev->tx_timeout = vlsi_tx_timeout;
+ ndev->watchdog_timeo = 500*HZ/1000; /* max. allowed turn time for IrLAP */
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ return 0;
+}
+
+/**************************************************************/
+
+static int __devinit
+vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct net_device *ndev;
+ vlsi_irda_dev_t *idev;
+
+ if (pci_enable_device(pdev))
+ goto out;
+ else
+ pdev->current_state = 0; /* hw must be running now */
+
+ IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n",
+ drivername, PCIDEV_NAME(pdev));
+
+ if ( !pci_resource_start(pdev,0)
+ || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
+ IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__);
+ goto out_disable;
+ }
+
+ ndev = alloc_irdadev(sizeof(*idev));
+ if (ndev==NULL) {
+ IRDA_ERROR("%s: Unable to allocate device memory.\n",
+ __FUNCTION__);
+ goto out_disable;
+ }
+
+ idev = ndev->priv;
+
+ spin_lock_init(&idev->lock);
+ init_MUTEX(&idev->sem);
+ down(&idev->sem);
+ idev->pdev = pdev;
+
+ if (vlsi_irda_init(ndev) < 0)
+ goto out_freedev;
+
+ if (register_netdev(ndev) < 0) {
+ IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__);
+ goto out_freedev;
+ }
+
+ if (vlsi_proc_root != NULL) {
+ struct proc_dir_entry *ent;
+
+ ent = create_proc_entry(ndev->name, S_IFREG|S_IRUGO, vlsi_proc_root);
+ if (!ent) {
+ IRDA_WARNING("%s: failed to create proc entry\n",
+ __FUNCTION__);
+ } else {
+ ent->data = ndev;
+ ent->proc_fops = VLSI_PROC_FOPS;
+ ent->size = 0;
+ }
+ idev->proc_entry = ent;
+ }
+ IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
+
+ pci_set_drvdata(pdev, ndev);
+ up(&idev->sem);
+
+ return 0;
+
+out_freedev:
+ up(&idev->sem);
+ free_netdev(ndev);
+out_disable:
+ pci_disable_device(pdev);
+out:
+ pci_set_drvdata(pdev, NULL);
+ return -ENODEV;
+}
+
+static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (!ndev) {
+ IRDA_ERROR("%s: lost netdevice?\n", drivername);
+ return;
+ }
+
+ unregister_netdev(ndev);
+
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (idev->proc_entry) {
+ remove_proc_entry(ndev->name, vlsi_proc_root);
+ idev->proc_entry = NULL;
+ }
+ up(&idev->sem);
+
+ free_netdev(ndev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ IRDA_MESSAGE("%s: %s removed\n", drivername, PCIDEV_NAME(pdev));
+}
+
+#ifdef CONFIG_PM
+
+/* The Controller doesn't provide PCI PM capabilities as defined by PCI specs.
+ * Some of the Linux PCI-PM code however depends on this, for example in
+ * pci_set_power_state(). So we have to take care to perform the required
+ * operations on our own (particularly reflecting the pdev->current_state)
+ * otherwise we might get cheated by pci-pm.
+ */
+
+
+static int vlsi_irda_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (state < 1 || state > 3 ) {
+ IRDA_ERROR("%s - %s: invalid pm state request: %u\n",
+ __FUNCTION__, PCIDEV_NAME(pdev), state);
+ return 0;
+ }
+ if (!ndev) {
+ IRDA_ERROR("%s - %s: no netdevice \n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (pdev->current_state != 0) { /* already suspended */
+ if (state > pdev->current_state) { /* simply go deeper */
+ pci_set_power_state(pdev,state);
+ pdev->current_state = state;
+ }
+ else
+ IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state);
+ up(&idev->sem);
+ return 0;
+ }
+
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ vlsi_stop_hw(idev);
+ pci_save_state(pdev);
+ if (!idev->new_baud)
+ /* remember speed settings to restore on resume */
+ idev->new_baud = idev->baud;
+ }
+
+ pci_set_power_state(pdev,state);
+ pdev->current_state = state;
+ idev->resume_ok = 1;
+ up(&idev->sem);
+ return 0;
+}
+
+static int vlsi_irda_resume(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (!ndev) {
+ IRDA_ERROR("%s - %s: no netdevice \n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (pdev->current_state == 0) {
+ up(&idev->sem);
+ IRDA_WARNING("%s - %s: already resumed\n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+
+ pci_set_power_state(pdev, 0);
+ pdev->current_state = 0;
+
+ if (!idev->resume_ok) {
+ /* should be obsolete now - but used to happen due to:
+ * - pci layer initially setting pdev->current_state = 4 (unknown)
+ * - pci layer did not walk the save_state-tree (might be APM problem)
+ * so we could not refuse to suspend from undefined state
+ * - vlsi_irda_suspend detected invalid state and refused to save
+ * configuration for resume - but was too late to stop suspending
+ * - vlsi_irda_resume got screwed when trying to resume from garbage
+ *
+ * now we explicitly set pdev->current_state = 0 after enabling the
+ * device and independently resume_ok should catch any garbage config.
+ */
+ IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
+ up(&idev->sem);
+ return 0;
+ }
+
+ if (netif_running(ndev)) {
+ pci_restore_state(pdev);
+ vlsi_start_hw(idev);
+ netif_device_attach(ndev);
+ }
+ idev->resume_ok = 0;
+ up(&idev->sem);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/*********************************************************/
+
+static struct pci_driver vlsi_irda_driver = {
+ .name = drivername,
+ .id_table = vlsi_irda_table,
+ .probe = vlsi_irda_probe,
+ .remove = __devexit_p(vlsi_irda_remove),
+#ifdef CONFIG_PM
+ .suspend = vlsi_irda_suspend,
+ .resume = vlsi_irda_resume,
+#endif
+};
+
+#define PROC_DIR ("driver/" DRIVER_NAME)
+
+static int __init vlsi_mod_init(void)
+{
+ int i, ret;
+
+ if (clksrc < 0 || clksrc > 3) {
+ IRDA_ERROR("%s: invalid clksrc=%d\n", drivername, clksrc);
+ return -1;
+ }
+
+ for (i = 0; i < 2; i++) {
+ switch(ringsize[i]) {
+ case 4:
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ break;
+ default:
+ IRDA_WARNING("%s: invalid %s ringsize %d, using default=8", drivername, (i)?"rx":"tx", ringsize[i]);
+ ringsize[i] = 8;
+ break;
+ }
+ }
+
+ sirpulse = !!sirpulse;
+
+ /* create_proc_entry returns NULL if !CONFIG_PROC_FS.
+ * Failure to create the procfs entry is handled like running
+ * without procfs - it's not required for the driver to work.
+ */
+ vlsi_proc_root = create_proc_entry(PROC_DIR, S_IFDIR, NULL);
+ if (vlsi_proc_root) {
+ /* protect registered procdir against module removal.
+ * Because we are in the module init path there's no race
+ * window after create_proc_entry (and no barrier needed).
+ */
+ vlsi_proc_root->owner = THIS_MODULE;
+ }
+
+ ret = pci_module_init(&vlsi_irda_driver);
+
+ if (ret && vlsi_proc_root)
+ remove_proc_entry(PROC_DIR, NULL);
+ return ret;
+
+}
+
+static void __exit vlsi_mod_exit(void)
+{
+ pci_unregister_driver(&vlsi_irda_driver);
+ if (vlsi_proc_root)
+ remove_proc_entry(PROC_DIR, NULL);
+}
+
+module_init(vlsi_mod_init);
+module_exit(vlsi_mod_exit);
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
new file mode 100644
index 000000000000..414694abf588
--- /dev/null
+++ b/drivers/net/irda/vlsi_ir.h
@@ -0,0 +1,798 @@
+
+/*********************************************************************
+ *
+ * vlsi_ir.h: VLSI82C147 PCI IrDA controller driver for Linux
+ *
+ * Version: 0.5
+ *
+ * Copyright (c) 2001-2003 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#ifndef IRDA_VLSI_FIR_H
+#define IRDA_VLSI_FIR_H
+
+/* ================================================================
+ * compatibility stuff
+ */
+
+/* definitions not present in pci_ids.h */
+
+#ifndef PCI_CLASS_WIRELESS_IRDA
+#define PCI_CLASS_WIRELESS_IRDA 0x0d00
+#endif
+
+#ifndef PCI_CLASS_SUBCLASS_MASK
+#define PCI_CLASS_SUBCLASS_MASK 0xffff
+#endif
+
+/* in recent 2.5 interrupt handlers have non-void return value */
+#ifndef IRQ_RETVAL
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+
+/* some stuff need to check kernelversion. Not all 2.5 stuff was present
+ * in early 2.5.x - the test is merely to separate 2.4 from 2.5
+ */
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+
+/* PDE() introduced in 2.5.4 */
+#ifdef CONFIG_PROC_FS
+#define PDE(inode) ((inode)->u.generic_ip)
+#endif
+
+/* irda crc16 calculation exported in 2.5.42 */
+#define irda_calc_crc16(fcs,buf,len) (GOOD_FCS)
+
+/* we use this for unified pci device name access */
+#define PCIDEV_NAME(pdev) ((pdev)->name)
+
+#else /* 2.5 or later */
+
+/* recent 2.5/2.6 stores pci device names at varying places ;-) */
+#ifdef CONFIG_PCI_NAMES
+/* human readable name */
+#define PCIDEV_NAME(pdev) ((pdev)->pretty_name)
+#else
+/* whatever we get from the associated struct device - bus:slot:dev.fn id */
+#define PCIDEV_NAME(pdev) (pci_name(pdev))
+#endif
+
+#endif
+
+/* ================================================================ */
+
+/* non-standard PCI registers */
+
+enum vlsi_pci_regs {
+ VLSI_PCI_CLKCTL = 0x40, /* chip clock input control */
+ VLSI_PCI_MSTRPAGE = 0x41, /* addr [31:24] for all busmaster cycles */
+ VLSI_PCI_IRMISC = 0x42 /* mainly legacy UART related */
+};
+
+/* ------------------------------------------ */
+
+/* VLSI_PCI_CLKCTL: Clock Control Register (u8, rw) */
+
+/* Three possible clock sources: either on-chip 48MHz PLL or
+ * external clock applied to EXTCLK pin. External clock may
+ * be either 48MHz or 40MHz, which is indicated by XCKSEL.
+ * CLKSTP controls whether the selected clock source gets
+ * connected to the IrDA block.
+ *
+ * On my HP OB-800 the BIOS sets external 40MHz clock as source
+ * when IrDA enabled and I've never detected any PLL lock success.
+ * Apparently the 14.3...MHz OSC input required for the PLL to work
+ * is not connected and the 40MHz EXTCLK is provided externally.
+ * At least this is what makes the driver working for me.
+ */
+
+enum vlsi_pci_clkctl {
+
+ /* PLL control */
+
+ CLKCTL_PD_INV = 0x04, /* PD#: inverted power down signal,
+ * i.e. PLL is powered, if PD_INV set */
+ CLKCTL_LOCK = 0x40, /* (ro) set, if PLL is locked */
+
+ /* clock source selection */
+
+ CLKCTL_EXTCLK = 0x20, /* set to select external clock input, not PLL */
+ CLKCTL_XCKSEL = 0x10, /* set to indicate EXTCLK is 40MHz, not 48MHz */
+
+ /* IrDA block control */
+
+ CLKCTL_CLKSTP = 0x80, /* set to disconnect from selected clock source */
+ CLKCTL_WAKE = 0x08 /* set to enable wakeup feature: whenever IR activity
+ * is detected, PD_INV gets set(?) and CLKSTP cleared */
+};
+
+/* ------------------------------------------ */
+
+/* VLSI_PCI_MSTRPAGE: Master Page Register (u8, rw) and busmastering stuff */
+
+#define DMA_MASK_USED_BY_HW 0xffffffff
+#define DMA_MASK_MSTRPAGE 0x00ffffff
+#define MSTRPAGE_VALUE (DMA_MASK_MSTRPAGE >> 24)
+
+ /* PCI busmastering is somewhat special for this guy - in short:
+ *
+ * We select to operate using fixed MSTRPAGE=0, use ISA DMA
+ * address restrictions to make the PCI BM api aware of this,
+ * but ensure the hardware is dealing with real 32bit access.
+ *
+ * In detail:
+ * The chip executes normal 32bit busmaster cycles, i.e.
+ * drives all 32 address lines. These addresses however are
+ * composed of [0:23] taken from various busaddr-pointers
+ * and [24:31] taken from the MSTRPAGE register in the VLSI82C147
+ * config space. Therefore _all_ busmastering must be
+ * targeted to/from one single 16MB (busaddr-) superpage!
+ * The point is to make sure all the allocations for memory
+ * locations with busmaster access (ring descriptors, buffers)
+ * are indeed bus-mappable to the same 16MB range (for x86 this
+ * means they must reside in the same 16MB physical memory address
+ * range). The only constraint we have which supports "several objects
+ * mappable to common 16MB range" paradigma, is the old ISA DMA
+ * restriction to the first 16MB of physical address range.
+ * Hence the approach here is to enable PCI busmaster support using
+ * the correct 32bit dma-mask used by the chip. Afterwards the device's
+ * dma-mask gets restricted to 24bit, which must be honoured somehow by
+ * all allocations for memory areas to be exposed to the chip ...
+ *
+ * Note:
+ * Don't be surprised to get "Setting latency timer..." messages every
+ * time when PCI busmastering is enabled for the chip.
+ * The chip has its PCI latency timer RO fixed at 0 - which is not a
+ * problem here, because it is never requesting _burst_ transactions.
+ */
+
+/* ------------------------------------------ */
+
+/* VLSI_PCIIRMISC: IR Miscellaneous Register (u8, rw) */
+
+/* legacy UART emulation - not used by this driver - would require:
+ * (see below for some register-value definitions)
+ *
+ * - IRMISC_UARTEN must be set to enable UART address decoding
+ * - IRMISC_UARTSEL configured
+ * - IRCFG_MASTER must be cleared
+ * - IRCFG_SIR must be set
+ * - IRENABLE_PHYANDCLOCK must be asserted 0->1 (and hence IRENABLE_SIR_ON)
+ */
+
+enum vlsi_pci_irmisc {
+
+ /* IR transceiver control */
+
+ IRMISC_IRRAIL = 0x40, /* (ro?) IR rail power indication (and control?)
+ * 0=3.3V / 1=5V. Probably set during power-on?
+ * unclear - not touched by driver */
+ IRMISC_IRPD = 0x08, /* transceiver power down, if set */
+
+ /* legacy UART control */
+
+ IRMISC_UARTTST = 0x80, /* UART test mode - "always write 0" */
+ IRMISC_UARTEN = 0x04, /* enable UART address decoding */
+
+ /* bits [1:0] IRMISC_UARTSEL to select legacy UART address */
+
+ IRMISC_UARTSEL_3f8 = 0x00,
+ IRMISC_UARTSEL_2f8 = 0x01,
+ IRMISC_UARTSEL_3e8 = 0x02,
+ IRMISC_UARTSEL_2e8 = 0x03
+};
+
+/* ================================================================ */
+
+/* registers mapped to 32 byte PCI IO space */
+
+/* note: better access all registers at the indicated u8/u16 size
+ * although some of them contain only 1 byte of information.
+ * some of them (particaluarly PROMPT and IRCFG) ignore
+ * access when using the wrong addressing mode!
+ */
+
+enum vlsi_pio_regs {
+ VLSI_PIO_IRINTR = 0x00, /* interrupt enable/request (u8, rw) */
+ VLSI_PIO_RINGPTR = 0x02, /* rx/tx ring pointer (u16, ro) */
+ VLSI_PIO_RINGBASE = 0x04, /* [23:10] of ring address (u16, rw) */
+ VLSI_PIO_RINGSIZE = 0x06, /* rx/tx ring size (u16, rw) */
+ VLSI_PIO_PROMPT = 0x08, /* triggers ring processing (u16, wo) */
+ /* 0x0a-0x0f: reserved / duplicated UART regs */
+ VLSI_PIO_IRCFG = 0x10, /* configuration select (u16, rw) */
+ VLSI_PIO_SIRFLAG = 0x12, /* BOF/EOF for filtered SIR (u16, ro) */
+ VLSI_PIO_IRENABLE = 0x14, /* enable and status register (u16, rw/ro) */
+ VLSI_PIO_PHYCTL = 0x16, /* physical layer current status (u16, ro) */
+ VLSI_PIO_NPHYCTL = 0x18, /* next physical layer select (u16, rw) */
+ VLSI_PIO_MAXPKT = 0x1a, /* [11:0] max len for packet receive (u16, rw) */
+ VLSI_PIO_RCVBCNT = 0x1c /* current receive-FIFO byte count (u16, ro) */
+ /* 0x1e-0x1f: reserved / duplicated UART regs */
+};
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_IRINTR: Interrupt Register (u8, rw) */
+
+/* enable-bits:
+ * 1 = enable / 0 = disable
+ * interrupt condition bits:
+ * set according to corresponding interrupt source
+ * (regardless of the state of the enable bits)
+ * enable bit status indicates whether interrupt gets raised
+ * write-to-clear
+ * note: RPKTINT and TPKTINT behave different in legacy UART mode (which we don't use :-)
+ */
+
+enum vlsi_pio_irintr {
+ IRINTR_ACTEN = 0x80, /* activity interrupt enable */
+ IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */
+ IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/
+ IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */
+ IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */
+ IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */
+ IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */
+ IRINTR_OE_INT = 0x01 /* UART rx fifo overrun error (read LSR to clear) */
+};
+
+/* we use this mask to check whether the (shared PCI) interrupt is ours */
+
+#define IRINTR_INT_MASK (IRINTR_ACTIVITY|IRINTR_RPKTINT|IRINTR_TPKTINT)
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_RINGPTR: Ring Pointer Read-Back Register (u16, ro) */
+
+/* _both_ ring pointers are indices relative to the _entire_ rx,tx-ring!
+ * i.e. the referenced descriptor is located
+ * at RINGBASE + PTR * sizeof(descr) for rx and tx
+ * therefore, the tx-pointer has offset MAX_RING_DESCR
+ */
+
+#define MAX_RING_DESCR 64 /* tx, rx rings may contain up to 64 descr each */
+
+#define RINGPTR_RX_MASK (MAX_RING_DESCR-1)
+#define RINGPTR_TX_MASK ((MAX_RING_DESCR-1)<<8)
+
+#define RINGPTR_GET_RX(p) ((p)&RINGPTR_RX_MASK)
+#define RINGPTR_GET_TX(p) (((p)&RINGPTR_TX_MASK)>>8)
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_RINGBASE: Ring Pointer Base Address Register (u16, ro) */
+
+/* Contains [23:10] part of the ring base (bus-) address
+ * which must be 1k-alinged. [31:24] is taken from
+ * VLSI_PCI_MSTRPAGE above.
+ * The controller initiates non-burst PCI BM cycles to
+ * fetch and update the descriptors in the ring.
+ * Once fetched, the descriptor remains cached onchip
+ * until it gets closed and updated due to the ring
+ * processing state machine.
+ * The entire ring area is split in rx and tx areas with each
+ * area consisting of 64 descriptors of 8 bytes each.
+ * The rx(tx) ring is located at ringbase+0 (ringbase+64*8).
+ */
+
+#define BUS_TO_RINGBASE(p) (((p)>>10)&0x3fff)
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_RINGSIZE: Ring Size Register (u16, rw) */
+
+/* bit mask to indicate the ring size to be used for rx and tx.
+ * possible values encoded bits
+ * 4 0000
+ * 8 0001
+ * 16 0011
+ * 32 0111
+ * 64 1111
+ * located at [15:12] for tx and [11:8] for rx ([7:0] unused)
+ *
+ * note: probably a good idea to have IRCFG_MSTR cleared when writing
+ * this so the state machines are stopped and the RINGPTR is reset!
+ */
+
+#define SIZE_TO_BITS(num) ((((num)-1)>>2)&0x0f)
+#define TX_RX_TO_RINGSIZE(tx,rx) ((SIZE_TO_BITS(tx)<<12)|(SIZE_TO_BITS(rx)<<8))
+#define RINGSIZE_TO_RXSIZE(rs) ((((rs)&0x0f00)>>6)+4)
+#define RINGSIZE_TO_TXSIZE(rs) ((((rs)&0xf000)>>10)+4)
+
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_PROMPT: Ring Prompting Register (u16, write-to-start) */
+
+/* writing any value kicks the ring processing state machines
+ * for both tx, rx rings as follows:
+ * - active rings (currently owning an active descriptor)
+ * ignore the prompt and continue
+ * - idle rings fetch the next descr from the ring and start
+ * their processing
+ */
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_IRCFG: IR Config Register (u16, rw) */
+
+/* notes:
+ * - not more than one SIR/MIR/FIR bit must be set at any time
+ * - SIR, MIR, FIR and CRC16 select the configuration which will
+ * be applied on next 0->1 transition of IRENABLE_PHYANDCLOCK (see below).
+ * - besides allowing the PCI interface to execute busmaster cycles
+ * and therefore the ring SM to operate, the MSTR bit has side-effects:
+ * when MSTR is cleared, the RINGPTR's get reset and the legacy UART mode
+ * (in contrast to busmaster access mode) gets enabled.
+ * - clearing ENRX or setting ENTX while data is received may stall the
+ * receive fifo until ENRX reenabled _and_ another packet arrives
+ * - SIRFILT means the chip performs the required unwrapping of hardware
+ * headers (XBOF's, BOF/EOF) and un-escaping in the _receive_ direction.
+ * Only the resulting IrLAP payload is copied to the receive buffers -
+ * but with the 16bit FCS still encluded. Question remains, whether it
+ * was already checked or we should do it before passing the packet to IrLAP?
+ */
+
+enum vlsi_pio_ircfg {
+ IRCFG_LOOP = 0x4000, /* enable loopback test mode */
+ IRCFG_ENTX = 0x1000, /* transmit enable */
+ IRCFG_ENRX = 0x0800, /* receive enable */
+ IRCFG_MSTR = 0x0400, /* master enable */
+ IRCFG_RXANY = 0x0200, /* receive any packet */
+ IRCFG_CRC16 = 0x0080, /* 16bit (not 32bit) CRC select for MIR/FIR */
+ IRCFG_FIR = 0x0040, /* FIR 4PPM encoding mode enable */
+ IRCFG_MIR = 0x0020, /* MIR HDLC encoding mode enable */
+ IRCFG_SIR = 0x0010, /* SIR encoding mode enable */
+ IRCFG_SIRFILT = 0x0008, /* enable SIR decode filter (receiver unwrapping) */
+ IRCFG_SIRTEST = 0x0004, /* allow SIR decode filter when not in SIR mode */
+ IRCFG_TXPOL = 0x0002, /* invert tx polarity when set */
+ IRCFG_RXPOL = 0x0001 /* invert rx polarity when set */
+};
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_SIRFLAG: SIR Flag Register (u16, ro) */
+
+/* register contains hardcoded BOF=0xc0 at [7:0] and EOF=0xc1 at [15:8]
+ * which is used for unwrapping received frames in SIR decode-filter mode
+ */
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_IRENABLE: IR Enable Register (u16, rw/ro) */
+
+/* notes:
+ * - IREN acts as gate for latching the configured IR mode information
+ * from IRCFG and IRPHYCTL when IREN=reset and applying them when
+ * IREN gets set afterwards.
+ * - ENTXST reflects IRCFG_ENTX
+ * - ENRXST = IRCFG_ENRX && (!IRCFG_ENTX || IRCFG_LOOP)
+ */
+
+enum vlsi_pio_irenable {
+ IRENABLE_PHYANDCLOCK = 0x8000, /* enable IR phy and gate the mode config (rw) */
+ IRENABLE_CFGER = 0x4000, /* mode configuration error (ro) */
+ IRENABLE_FIR_ON = 0x2000, /* FIR on status (ro) */
+ IRENABLE_MIR_ON = 0x1000, /* MIR on status (ro) */
+ IRENABLE_SIR_ON = 0x0800, /* SIR on status (ro) */
+ IRENABLE_ENTXST = 0x0400, /* transmit enable status (ro) */
+ IRENABLE_ENRXST = 0x0200, /* Receive enable status (ro) */
+ IRENABLE_CRC16_ON = 0x0100 /* 16bit (not 32bit) CRC enabled status (ro) */
+};
+
+#define IRENABLE_MASK 0xff00 /* Read mask */
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_PHYCTL: IR Physical Layer Current Control Register (u16, ro) */
+
+/* read-back of the currently applied physical layer status.
+ * applied from VLSI_PIO_NPHYCTL at rising edge of IRENABLE_PHYANDCLOCK
+ * contents identical to VLSI_PIO_NPHYCTL (see below)
+ */
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_NPHYCTL: IR Physical Layer Next Control Register (u16, rw) */
+
+/* latched during IRENABLE_PHYANDCLOCK=0 and applied at 0-1 transition
+ *
+ * consists of BAUD[15:10], PLSWID[9:5] and PREAMB[4:0] bits defined as follows:
+ *
+ * SIR-mode: BAUD = (115.2kHz / baudrate) - 1
+ * PLSWID = (pulsetime * freq / (BAUD+1)) - 1
+ * where pulsetime is the requested IrPHY pulse width
+ * and freq is 8(16)MHz for 40(48)MHz primary input clock
+ * PREAMB: don't care for SIR
+ *
+ * The nominal SIR pulse width is 3/16 bit time so we have PLSWID=12
+ * fixed for all SIR speeds at 40MHz input clock (PLSWID=24 at 48MHz).
+ * IrPHY also allows shorter pulses down to the nominal pulse duration
+ * at 115.2kbaud (minus some tolerance) which is 1.41 usec.
+ * Using the expression PLSWID = 12/(BAUD+1)-1 (multiplied by two for 48MHz)
+ * we get the minimum acceptable PLSWID values according to the VLSI
+ * specification, which provides 1.5 usec pulse width for all speeds (except
+ * for 2.4kbaud getting 6usec). This is fine with IrPHY v1.3 specs and
+ * reduces the transceiver power which drains the battery. At 9.6kbaud for
+ * example this amounts to more than 90% battery power saving!
+ *
+ * MIR-mode: BAUD = 0
+ * PLSWID = 9(10) for 40(48) MHz input clock
+ * to get nominal MIR pulse width
+ * PREAMB = 1
+ *
+ * FIR-mode: BAUD = 0
+ * PLSWID: don't care
+ * PREAMB = 15
+ */
+
+#define PHYCTL_BAUD_SHIFT 10
+#define PHYCTL_BAUD_MASK 0xfc00
+#define PHYCTL_PLSWID_SHIFT 5
+#define PHYCTL_PLSWID_MASK 0x03e0
+#define PHYCTL_PREAMB_SHIFT 0
+#define PHYCTL_PREAMB_MASK 0x001f
+
+#define PHYCTL_TO_BAUD(bwp) (((bwp)&PHYCTL_BAUD_MASK)>>PHYCTL_BAUD_SHIFT)
+#define PHYCTL_TO_PLSWID(bwp) (((bwp)&PHYCTL_PLSWID_MASK)>>PHYCTL_PLSWID_SHIFT)
+#define PHYCTL_TO_PREAMB(bwp) (((bwp)&PHYCTL_PREAMB_MASK)>>PHYCTL_PREAMB_SHIFT)
+
+#define BWP_TO_PHYCTL(b,w,p) ((((b)<<PHYCTL_BAUD_SHIFT)&PHYCTL_BAUD_MASK) \
+ | (((w)<<PHYCTL_PLSWID_SHIFT)&PHYCTL_PLSWID_MASK) \
+ | (((p)<<PHYCTL_PREAMB_SHIFT)&PHYCTL_PREAMB_MASK))
+
+#define BAUD_BITS(br) ((115200/(br))-1)
+
+static inline unsigned
+calc_width_bits(unsigned baudrate, unsigned widthselect, unsigned clockselect)
+{
+ unsigned tmp;
+
+ if (widthselect) /* nominal 3/16 puls width */
+ return (clockselect) ? 12 : 24;
+
+ tmp = ((clockselect) ? 12 : 24) / (BAUD_BITS(baudrate)+1);
+
+ /* intermediate result of integer division needed here */
+
+ return (tmp>0) ? (tmp-1) : 0;
+}
+
+#define PHYCTL_SIR(br,ws,cs) BWP_TO_PHYCTL(BAUD_BITS(br),calc_width_bits((br),(ws),(cs)),0)
+#define PHYCTL_MIR(cs) BWP_TO_PHYCTL(0,((cs)?9:10),1)
+#define PHYCTL_FIR BWP_TO_PHYCTL(0,0,15)
+
+/* quite ugly, I know. But implementing these calculations here avoids
+ * having magic numbers in the code and allows some playing with pulsewidths
+ * without risk to violate the standards.
+ * FWIW, here is the table for reference:
+ *
+ * baudrate BAUD min-PLSWID nom-PLSWID PREAMB
+ * 2400 47 0(0) 12(24) 0
+ * 9600 11 0(0) 12(24) 0
+ * 19200 5 1(2) 12(24) 0
+ * 38400 2 3(6) 12(24) 0
+ * 57600 1 5(10) 12(24) 0
+ * 115200 0 11(22) 12(24) 0
+ * MIR 0 - 9(10) 1
+ * FIR 0 - 0 15
+ *
+ * note: x(y) means x-value for 40MHz / y-value for 48MHz primary input clock
+ */
+
+/* ------------------------------------------ */
+
+
+/* VLSI_PIO_MAXPKT: Maximum Packet Length register (u16, rw) */
+
+/* maximum acceptable length for received packets */
+
+/* hw imposed limitation - register uses only [11:0] */
+#define MAX_PACKET_LENGTH 0x0fff
+
+/* IrLAP I-field (apparently not defined elsewhere) */
+#define IRDA_MTU 2048
+
+/* complete packet consists of A(1)+C(1)+I(<=IRDA_MTU) */
+#define IRLAP_SKB_ALLOCSIZE (1+1+IRDA_MTU)
+
+/* the buffers we use to exchange frames with the hardware need to be
+ * larger than IRLAP_SKB_ALLOCSIZE because we may have up to 4 bytes FCS
+ * appended and, in SIR mode, a lot of frame wrapping bytes. The worst
+ * case appears to be a SIR packet with I-size==IRDA_MTU and all bytes
+ * requiring to be escaped to provide transparency. Furthermore, the peer
+ * might ask for quite a number of additional XBOFs:
+ * up to 115+48 XBOFS 163
+ * regular BOF 1
+ * A-field 1
+ * C-field 1
+ * I-field, IRDA_MTU, all escaped 4096
+ * FCS (16 bit at SIR, escaped) 4
+ * EOF 1
+ * AFAICS nothing in IrLAP guarantees A/C field not to need escaping
+ * (f.e. 0xc0/0xc1 - i.e. BOF/EOF - are legal values there) so in the
+ * worst case we have 4269 bytes total frame size.
+ * However, the VLSI uses 12 bits only for all buffer length values,
+ * which limits the maximum useable buffer size <= 4095.
+ * Note this is not a limitation in the receive case because we use
+ * the SIR filtering mode where the hw unwraps the frame and only the
+ * bare packet+fcs is stored into the buffer - in contrast to the SIR
+ * tx case where we have to pass frame-wrapped packets to the hw.
+ * If this would ever become an issue in real life, the only workaround
+ * I see would be using the legacy UART emulation in SIR mode.
+ */
+
+#define XFER_BUF_SIZE MAX_PACKET_LENGTH
+
+/* ------------------------------------------ */
+
+/* VLSI_PIO_RCVBCNT: Receive Byte Count Register (u16, ro) */
+
+/* receive packet counter gets incremented on every non-filtered
+ * byte which was put in the receive fifo and reset for each
+ * new packet. Used to decide whether we are just in the middle
+ * of receiving
+ */
+
+/* better apply the [11:0] mask when reading, as some docs say the
+ * reserved [15:12] would return 1 when reading - which is wrong AFAICS
+ */
+#define RCVBCNT_MASK 0x0fff
+
+/******************************************************************/
+
+/* descriptors for rx/tx ring
+ *
+ * accessed by hardware - don't change!
+ *
+ * the descriptor is owned by hardware, when the ACTIVE status bit
+ * is set and nothing (besides reading status to test the bit)
+ * shall be done. The bit gets cleared by hw, when the descriptor
+ * gets closed. Premature reaping of descriptors owned be the chip
+ * can be achieved by disabling IRCFG_MSTR
+ *
+ * Attention: Writing addr overwrites status!
+ *
+ * ### FIXME: depends on endianess (but there ain't no non-i586 ob800 ;-)
+ */
+
+struct ring_descr_hw {
+ volatile u16 rd_count; /* tx/rx count [11:0] */
+ u16 reserved;
+ union {
+ u32 addr; /* [23:0] of the buffer's busaddress */
+ struct {
+ u8 addr_res[3];
+ volatile u8 status; /* descriptor status */
+ } rd_s __attribute__((packed));
+ } rd_u __attribute((packed));
+} __attribute__ ((packed));
+
+#define rd_addr rd_u.addr
+#define rd_status rd_u.rd_s.status
+
+/* ring descriptor status bits */
+
+#define RD_ACTIVE 0x80 /* descriptor owned by hw (both TX,RX) */
+
+/* TX ring descriptor status */
+
+#define RD_TX_DISCRC 0x40 /* do not send CRC (for SIR) */
+#define RD_TX_BADCRC 0x20 /* force a bad CRC */
+#define RD_TX_PULSE 0x10 /* send indication pulse after this frame (MIR/FIR) */
+#define RD_TX_FRCEUND 0x08 /* force underrun */
+#define RD_TX_CLRENTX 0x04 /* clear ENTX after this frame */
+#define RD_TX_UNDRN 0x01 /* TX fifo underrun (probably PCI problem) */
+
+/* RX ring descriptor status */
+
+#define RD_RX_PHYERR 0x40 /* physical encoding error */
+#define RD_RX_CRCERR 0x20 /* CRC error (MIR/FIR) */
+#define RD_RX_LENGTH 0x10 /* frame exceeds buffer length */
+#define RD_RX_OVER 0x08 /* RX fifo overrun (probably PCI problem) */
+#define RD_RX_SIRBAD 0x04 /* EOF missing: BOF follows BOF (SIR, filtered) */
+
+#define RD_RX_ERROR 0x7c /* any error in received frame */
+
+/* the memory required to hold the 2 descriptor rings */
+#define HW_RING_AREA_SIZE (2 * MAX_RING_DESCR * sizeof(struct ring_descr_hw))
+
+/******************************************************************/
+
+/* sw-ring descriptors consists of a bus-mapped transfer buffer with
+ * associated skb and a pointer to the hw entry descriptor
+ */
+
+struct ring_descr {
+ struct ring_descr_hw *hw;
+ struct sk_buff *skb;
+ void *buf;
+};
+
+/* wrappers for operations on hw-exposed ring descriptors
+ * access to the hw-part of the descriptors must use these.
+ */
+
+static inline int rd_is_active(struct ring_descr *rd)
+{
+ return ((rd->hw->rd_status & RD_ACTIVE) != 0);
+}
+
+static inline void rd_activate(struct ring_descr *rd)
+{
+ rd->hw->rd_status |= RD_ACTIVE;
+}
+
+static inline void rd_set_status(struct ring_descr *rd, u8 s)
+{
+ rd->hw->rd_status = s; /* may pass ownership to the hardware */
+}
+
+static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s)
+{
+ /* order is important for two reasons:
+ * - overlayed: writing addr overwrites status
+ * - we want to write status last so we have valid address in
+ * case status has RD_ACTIVE set
+ */
+
+ if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) {
+ IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__);
+ dump_stack();
+ return;
+ }
+
+ a &= DMA_MASK_MSTRPAGE; /* clear highbyte to make sure we won't write
+ * to status - just in case MSTRPAGE_VALUE!=0
+ */
+ rd->hw->rd_addr = cpu_to_le32(a);
+ wmb();
+ rd_set_status(rd, s); /* may pass ownership to the hardware */
+}
+
+static inline void rd_set_count(struct ring_descr *rd, u16 c)
+{
+ rd->hw->rd_count = cpu_to_le16(c);
+}
+
+static inline u8 rd_get_status(struct ring_descr *rd)
+{
+ return rd->hw->rd_status;
+}
+
+static inline dma_addr_t rd_get_addr(struct ring_descr *rd)
+{
+ dma_addr_t a;
+
+ a = le32_to_cpu(rd->hw->rd_addr);
+ return (a & DMA_MASK_MSTRPAGE) | (MSTRPAGE_VALUE << 24);
+}
+
+static inline u16 rd_get_count(struct ring_descr *rd)
+{
+ return le16_to_cpu(rd->hw->rd_count);
+}
+
+/******************************************************************/
+
+/* sw descriptor rings for rx, tx:
+ *
+ * operations follow producer-consumer paradigm, with the hw
+ * in the middle doing the processing.
+ * ring size must be power of two.
+ *
+ * producer advances r->tail after inserting for processing
+ * consumer advances r->head after removing processed rd
+ * ring is empty if head==tail / full if (tail+1)==head
+ */
+
+struct vlsi_ring {
+ struct pci_dev *pdev;
+ int dir;
+ unsigned len;
+ unsigned size;
+ unsigned mask;
+ atomic_t head, tail;
+ struct ring_descr *rd;
+};
+
+/* ring processing helpers */
+
+static inline struct ring_descr *ring_last(struct vlsi_ring *r)
+{
+ int t;
+
+ t = atomic_read(&r->tail) & r->mask;
+ return (((t+1) & r->mask) == (atomic_read(&r->head) & r->mask)) ? NULL : &r->rd[t];
+}
+
+static inline struct ring_descr *ring_put(struct vlsi_ring *r)
+{
+ atomic_inc(&r->tail);
+ return ring_last(r);
+}
+
+static inline struct ring_descr *ring_first(struct vlsi_ring *r)
+{
+ int h;
+
+ h = atomic_read(&r->head) & r->mask;
+ return (h == (atomic_read(&r->tail) & r->mask)) ? NULL : &r->rd[h];
+}
+
+static inline struct ring_descr *ring_get(struct vlsi_ring *r)
+{
+ atomic_inc(&r->head);
+ return ring_first(r);
+}
+
+/******************************************************************/
+
+/* our private compound VLSI-PCI-IRDA device information */
+
+typedef struct vlsi_irda_dev {
+ struct pci_dev *pdev;
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap;
+
+ struct qos_info qos;
+
+ unsigned mode;
+ int baud, new_baud;
+
+ dma_addr_t busaddr;
+ void *virtaddr;
+ struct vlsi_ring *tx_ring, *rx_ring;
+
+ struct timeval last_rx;
+
+ spinlock_t lock;
+ struct semaphore sem;
+
+ u8 resume_ok;
+ struct proc_dir_entry *proc_entry;
+
+} vlsi_irda_dev_t;
+
+/********************************************************/
+
+/* the remapped error flags we use for returning from frame
+ * post-processing in vlsi_process_tx/rx() after it was completed
+ * by the hardware. These functions either return the >=0 number
+ * of transfered bytes in case of success or the negative (-)
+ * of the or'ed error flags.
+ */
+
+#define VLSI_TX_DROP 0x0001
+#define VLSI_TX_FIFO 0x0002
+
+#define VLSI_RX_DROP 0x0100
+#define VLSI_RX_OVER 0x0200
+#define VLSI_RX_LENGTH 0x0400
+#define VLSI_RX_FRAME 0x0800
+#define VLSI_RX_CRC 0x1000
+
+/********************************************************/
+
+#endif /* IRDA_VLSI_FIR_H */
+
diff --git a/drivers/net/irda/w83977af.h b/drivers/net/irda/w83977af.h
new file mode 100644
index 000000000000..04476c2e9121
--- /dev/null
+++ b/drivers/net/irda/w83977af.h
@@ -0,0 +1,53 @@
+#ifndef W83977AF_H
+#define W83977AF_H
+
+#define W977_EFIO_BASE 0x370
+#define W977_EFIO2_BASE 0x3f0
+#define W977_DEVICE_IR 0x06
+
+
+/*
+ * Enter extended function mode
+ */
+static inline void w977_efm_enter(unsigned int efio)
+{
+ outb(0x87, efio);
+ outb(0x87, efio);
+}
+
+/*
+ * Select a device to configure
+ */
+
+static inline void w977_select_device(__u8 devnum, unsigned int efio)
+{
+ outb(0x07, efio);
+ outb(devnum, efio+1);
+}
+
+/*
+ * Write a byte to a register
+ */
+static inline void w977_write_reg(__u8 reg, __u8 value, unsigned int efio)
+{
+ outb(reg, efio);
+ outb(value, efio+1);
+}
+
+/*
+ * read a byte from a register
+ */
+static inline __u8 w977_read_reg(__u8 reg, unsigned int efio)
+{
+ outb(reg, efio);
+ return inb(efio+1);
+}
+
+/*
+ * Exit extended function mode
+ */
+static inline void w977_efm_exit(unsigned int efio)
+{
+ outb(0xAA, efio);
+}
+#endif
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
new file mode 100644
index 000000000000..0ea65c4c6f85
--- /dev/null
+++ b/drivers/net/irda/w83977af_ir.c
@@ -0,0 +1,1379 @@
+/*********************************************************************
+ *
+ * Filename: w83977af_ir.c
+ * Version: 1.0
+ * Description: FIR driver for the Winbond W83977AF Super I/O chip
+ * Status: Experimental.
+ * Author: Paul VanderSpek
+ * Created at: Wed Nov 4 11:46:16 1998
+ * Modified at: Fri Jan 28 12:10:59 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998-1999 Rebel.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Paul VanderSpek nor Rebel.com admit liability nor provide
+ * warranty for any of this software. This material is provided "AS-IS"
+ * and at no charge.
+ *
+ * If you find bugs in this file, its very likely that the same bug
+ * will also be in pc87108.c since the implementations are quite
+ * similar.
+ *
+ * Notice that all functions that needs to access the chip in _any_
+ * way, must save BSR register on entry, and restore it on exit.
+ * It is _very_ important to follow this policy!
+ *
+ * __u8 bank;
+ *
+ * bank = inb( iobase+BSR);
+ *
+ * do_your_stuff_here();
+ *
+ * outb( bank, iobase+BSR);
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+#include "w83977af.h"
+#include "w83977af_ir.h"
+
+#ifdef CONFIG_ARCH_NETWINDER /* Adjust to NetWinder differences */
+#undef CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
+#define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
+#endif
+#undef CONFIG_USE_INTERNAL_TIMER /* Just cannot make that timer work */
+#define CONFIG_USE_W977_PNP /* Currently needed */
+#define PIO_MAX_SPEED 115200
+
+static char *driver_name = "w83977af_ir";
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+
+#define CHIP_IO_EXTENT 8
+
+static unsigned int io[] = { 0x180, ~0, ~0, ~0 };
+#ifdef CONFIG_ARCH_NETWINDER /* Adjust to NetWinder differences */
+static unsigned int irq[] = { 6, 0, 0, 0 };
+#else
+static unsigned int irq[] = { 11, 0, 0, 0 };
+#endif
+static unsigned int dma[] = { 1, 0, 0, 0 };
+static unsigned int efbase[] = { W977_EFIO_BASE, W977_EFIO2_BASE };
+static unsigned int efio = W977_EFIO_BASE;
+
+static struct w83977af_ir *dev_self[] = { NULL, NULL, NULL, NULL};
+
+/* Some prototypes */
+static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
+ unsigned int dma);
+static int w83977af_close(struct w83977af_ir *self);
+static int w83977af_probe(int iobase, int irq, int dma);
+static int w83977af_dma_receive(struct w83977af_ir *self);
+static int w83977af_dma_receive_complete(struct w83977af_ir *self);
+static int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
+static void w83977af_dma_write(struct w83977af_ir *self, int iobase);
+static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed);
+static int w83977af_is_receiving(struct w83977af_ir *self);
+
+static int w83977af_net_open(struct net_device *dev);
+static int w83977af_net_close(struct net_device *dev);
+static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *w83977af_net_get_stats(struct net_device *dev);
+
+/*
+ * Function w83977af_init ()
+ *
+ * Initialize chip. Just try to find out how many chips we are dealing with
+ * and where they are
+ */
+static int __init w83977af_init(void)
+{
+ int i;
+
+ IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+ for (i=0; (io[i] < 2000) && (i < 4); i++) {
+ if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
+ return 0;
+ }
+ return -ENODEV;
+}
+
+/*
+ * Function w83977af_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+static void __exit w83977af_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ w83977af_close(dev_self[i]);
+ }
+}
+
+/*
+ * Function w83977af_open (iobase, irq)
+ *
+ * Open driver instance
+ *
+ */
+int w83977af_open(int i, unsigned int iobase, unsigned int irq,
+ unsigned int dma)
+{
+ struct net_device *dev;
+ struct w83977af_ir *self;
+ int err;
+
+ IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+ /* Lock the port that we need */
+ if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
+ IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__ , iobase);
+ return -ENODEV;
+ }
+
+ if (w83977af_probe(iobase, irq, dma) == -1) {
+ err = -1;
+ goto err_out;
+ }
+ /*
+ * Allocate new instance of the driver
+ */
+ dev = alloc_irdadev(sizeof(struct w83977af_ir));
+ if (dev == NULL) {
+ printk( KERN_ERR "IrDA: Can't allocate memory for "
+ "IrDA control block!\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ self = dev->priv;
+ spin_lock_init(&self->lock);
+
+
+ /* Initialize IO */
+ self->io.fir_base = iobase;
+ self->io.irq = irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = dma;
+ self->io.fifo_size = 32;
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* The only value we must override it the baudrate */
+
+ /* FIXME: The HP HDLS-1100 does not support 1152000! */
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
+
+ /* The HP HDLS-1100 needs 1 ms according to the specs */
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384;
+ self->tx_buff.truesize = 4000;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out1;
+ }
+
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto err_out2;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+ self->netdev = dev;
+
+ /* Keep track of module usage */
+ SET_MODULE_OWNER(dev);
+
+ /* Override the network functions we need to use */
+ dev->hard_start_xmit = w83977af_hard_xmit;
+ dev->open = w83977af_net_open;
+ dev->stop = w83977af_net_close;
+ dev->do_ioctl = w83977af_net_ioctl;
+ dev->get_stats = w83977af_net_get_stats;
+
+ err = register_netdev(dev);
+ if (err) {
+ IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__);
+ goto err_out3;
+ }
+ IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+
+ return 0;
+err_out3:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+err_out2:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+err_out1:
+ free_netdev(dev);
+err_out:
+ release_region(iobase, CHIP_IO_EXTENT);
+ return err;
+}
+
+/*
+ * Function w83977af_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int w83977af_close(struct w83977af_ir *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+ iobase = self->io.fir_base;
+
+#ifdef CONFIG_USE_W977_PNP
+ /* enter PnP configuration mode */
+ w977_efm_enter(efio);
+
+ w977_select_device(W977_DEVICE_IR, efio);
+
+ /* Deactivate device */
+ w977_write_reg(0x30, 0x00, efio);
+
+ w977_efm_exit(efio);
+#endif /* CONFIG_USE_W977_PNP */
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n",
+ __FUNCTION__ , self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+int w83977af_probe( int iobase, int irq, int dma)
+{
+ int version;
+ int i;
+
+ for (i=0; i < 2; i++) {
+ IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ );
+#ifdef CONFIG_USE_W977_PNP
+ /* Enter PnP configuration mode */
+ w977_efm_enter(efbase[i]);
+
+ w977_select_device(W977_DEVICE_IR, efbase[i]);
+
+ /* Configure PnP port, IRQ, and DMA channel */
+ w977_write_reg(0x60, (iobase >> 8) & 0xff, efbase[i]);
+ w977_write_reg(0x61, (iobase) & 0xff, efbase[i]);
+
+ w977_write_reg(0x70, irq, efbase[i]);
+#ifdef CONFIG_ARCH_NETWINDER
+ /* Netwinder uses 1 higher than Linux */
+ w977_write_reg(0x74, dma+1, efbase[i]);
+#else
+ w977_write_reg(0x74, dma, efbase[i]);
+#endif /*CONFIG_ARCH_NETWINDER */
+ w977_write_reg(0x75, 0x04, efbase[i]); /* Disable Tx DMA */
+
+ /* Set append hardware CRC, enable IR bank selection */
+ w977_write_reg(0xf0, APEDCRC|ENBNKSEL, efbase[i]);
+
+ /* Activate device */
+ w977_write_reg(0x30, 0x01, efbase[i]);
+
+ w977_efm_exit(efbase[i]);
+#endif /* CONFIG_USE_W977_PNP */
+ /* Disable Advanced mode */
+ switch_bank(iobase, SET2);
+ outb(iobase+2, 0x00);
+
+ /* Turn on UART (global) interrupts */
+ switch_bank(iobase, SET0);
+ outb(HCR_EN_IRQ, iobase+HCR);
+
+ /* Switch to advanced mode */
+ switch_bank(iobase, SET2);
+ outb(inb(iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
+
+ /* Set default IR-mode */
+ switch_bank(iobase, SET0);
+ outb(HCR_SIR, iobase+HCR);
+
+ /* Read the Advanced IR ID */
+ switch_bank(iobase, SET3);
+ version = inb(iobase+AUID);
+
+ /* Should be 0x1? */
+ if (0x10 == (version & 0xf0)) {
+ efio = efbase[i];
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, SET2);
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+
+ /* Set FIFO threshold to TX17, RX16 */
+ switch_bank(iobase, SET0);
+ outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|
+ UFR_EN_FIFO,iobase+UFR);
+
+ /* Receiver frame length */
+ switch_bank(iobase, SET4);
+ outb(2048 & 0xff, iobase+6);
+ outb((2048 >> 8) & 0x1f, iobase+7);
+
+ /*
+ * Init HP HSDL-1100 transceiver.
+ *
+ * Set IRX_MSL since we have 2 * receive paths IRRX,
+ * and IRRXH. Clear IRSL0D since we want IRSL0 * to
+ * be a input pin used for IRRXH
+ *
+ * IRRX pin 37 connected to receiver
+ * IRTX pin 38 connected to transmitter
+ * FIRRX pin 39 connected to receiver (IRSL0)
+ * CIRRX pin 40 connected to pin 37
+ */
+ switch_bank(iobase, SET7);
+ outb(0x40, iobase+7);
+
+ IRDA_MESSAGE("W83977AF (IR) driver loaded. "
+ "Version: 0x%02x\n", version);
+
+ return 0;
+ } else {
+ /* Try next extented function register address */
+ IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ );
+ }
+ }
+ return -1;
+}
+
+void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
+{
+ int ir_mode = HCR_SIR;
+ int iobase;
+ __u8 set;
+
+ iobase = self->io.fir_base;
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ /* Save current bank */
+ set = inb(iobase+SSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, SET0);
+ outb(0, iobase+ICR);
+
+ /* Select Set 2 */
+ switch_bank(iobase, SET2);
+ outb(0x00, iobase+ABHL);
+
+ switch (speed) {
+ case 9600: outb(0x0c, iobase+ABLL); break;
+ case 19200: outb(0x06, iobase+ABLL); break;
+ case 38400: outb(0x03, iobase+ABLL); break;
+ case 57600: outb(0x02, iobase+ABLL); break;
+ case 115200: outb(0x01, iobase+ABLL); break;
+ case 576000:
+ ir_mode = HCR_MIR_576;
+ IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ );
+ break;
+ case 1152000:
+ ir_mode = HCR_MIR_1152;
+ IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ );
+ break;
+ case 4000000:
+ ir_mode = HCR_FIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ );
+ break;
+ default:
+ ir_mode = HCR_FIR;
+ IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed);
+ break;
+ }
+
+ /* Set speed mode */
+ switch_bank(iobase, SET0);
+ outb(ir_mode, iobase+HCR);
+
+ /* set FIFO size to 32 */
+ switch_bank(iobase, SET2);
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+
+ /* set FIFO threshold to TX17, RX16 */
+ switch_bank(iobase, SET0);
+ outb(0x00, iobase+UFR); /* Reset */
+ outb(UFR_EN_FIFO, iobase+UFR); /* First we must enable FIFO */
+ outb(0xa7, iobase+UFR);
+
+ netif_wake_queue(self->netdev);
+
+ /* Enable some interrupts so we can receive frames */
+ switch_bank(iobase, SET0);
+ if (speed > PIO_MAX_SPEED) {
+ outb(ICR_EFSFI, iobase+ICR);
+ w83977af_dma_receive(self);
+ } else
+ outb(ICR_ERBRI, iobase+ICR);
+
+ /* Restore SSR */
+ outb(set, iobase+SSR);
+}
+
+/*
+ * Function w83977af_hard_xmit (skb, dev)
+ *
+ * Sets up a DMA transfer to send the current frame.
+ *
+ */
+int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct w83977af_ir *self;
+ __s32 speed;
+ int iobase;
+ __u8 set;
+ int mtt;
+
+ self = (struct w83977af_ir *) dev->priv;
+
+ iobase = self->io.fir_base;
+
+ IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies,
+ (int) skb->len);
+
+ /* Lock transmit buffer */
+ netif_stop_queue(dev);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame */
+ if (!skb->len) {
+ w83977af_change_speed(self, speed);
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Decide if we should use PIO or DMA transfer */
+ if (self->io.speed > PIO_MAX_SPEED) {
+ self->tx_buff.data = self->tx_buff.head;
+ memcpy(self->tx_buff.data, skb->data, skb->len);
+ self->tx_buff.len = skb->len;
+
+ mtt = irda_get_mtt(skb);
+#ifdef CONFIG_USE_INTERNAL_TIMER
+ if (mtt > 50) {
+ /* Adjust for timer resolution */
+ mtt /= 1000+1;
+
+ /* Setup timer */
+ switch_bank(iobase, SET4);
+ outb(mtt & 0xff, iobase+TMRL);
+ outb((mtt >> 8) & 0x0f, iobase+TMRH);
+
+ /* Start timer */
+ outb(IR_MSL_EN_TMR, iobase+IR_MSL);
+ self->io.direction = IO_XMIT;
+
+ /* Enable timer interrupt */
+ switch_bank(iobase, SET0);
+ outb(ICR_ETMRI, iobase+ICR);
+ } else {
+#endif
+ IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt);
+ if (mtt)
+ udelay(mtt);
+
+ /* Enable DMA interrupt */
+ switch_bank(iobase, SET0);
+ outb(ICR_EDMAI, iobase+ICR);
+ w83977af_dma_write(self, iobase);
+#ifdef CONFIG_USE_INTERNAL_TIMER
+ }
+#endif
+ } else {
+ self->tx_buff.data = self->tx_buff.head;
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ /* Add interrupt on tx low level (will fire immediately) */
+ switch_bank(iobase, SET0);
+ outb(ICR_ETXTHI, iobase+ICR);
+ }
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+
+ /* Restore set register */
+ outb(set, iobase+SSR);
+
+ return 0;
+}
+
+/*
+ * Function w83977af_dma_write (self, iobase)
+ *
+ * Send frame using DMA
+ *
+ */
+static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
+{
+ __u8 set;
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ unsigned long flags;
+ __u8 hcr;
+#endif
+ IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len);
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, SET0);
+ outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
+
+ /* Choose transmit DMA channel */
+ switch_bank(iobase, SET2);
+ outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ spin_lock_irqsave(&self->lock, flags);
+
+ disable_dma(self->io.dma);
+ clear_dma_ff(self->io.dma);
+ set_dma_mode(self->io.dma, DMA_MODE_READ);
+ set_dma_addr(self->io.dma, self->tx_buff_dma);
+ set_dma_count(self->io.dma, self->tx_buff.len);
+#else
+ irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
+ DMA_MODE_WRITE);
+#endif
+ self->io.direction = IO_XMIT;
+
+ /* Enable DMA */
+ switch_bank(iobase, SET0);
+#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
+ hcr = inb(iobase+HCR);
+ outb(hcr | HCR_EN_DMA, iobase+HCR);
+ enable_dma(self->io.dma);
+ spin_unlock_irqrestore(&self->lock, flags);
+#else
+ outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
+#endif
+
+ /* Restore set register */
+ outb(set, iobase+SSR);
+}
+
+/*
+ * Function w83977af_pio_write (iobase, buf, len, fifo_size)
+ *
+ *
+ *
+ */
+static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
+{
+ int actual = 0;
+ __u8 set;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+ /* Save current bank */
+ set = inb(iobase+SSR);
+
+ switch_bank(iobase, SET0);
+ if (!(inb_p(iobase+USR) & USR_TSRE)) {
+ IRDA_DEBUG(4,
+ "%s(), warning, FIFO not empty yet!\n", __FUNCTION__ );
+
+ fifo_size -= 17;
+ IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n",
+ __FUNCTION__ , fifo_size);
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual++], iobase+TBR);
+ }
+
+ IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
+ __FUNCTION__ , fifo_size, actual, len);
+
+ /* Restore bank */
+ outb(set, iobase+SSR);
+
+ return actual;
+}
+
+/*
+ * Function w83977af_dma_xmit_complete (self)
+ *
+ * The transfer of a frame in finished. So do the necessary things
+ *
+ *
+ */
+static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
+{
+ int iobase;
+ __u8 set;
+
+ IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies);
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.fir_base;
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, SET0);
+ outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
+
+ /* Check for underrrun! */
+ if (inb(iobase+AUDR) & AUDR_UNDR) {
+ IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ );
+
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+
+ /* Clear bit, by writing 1 to it */
+ outb(AUDR_UNDR, iobase+AUDR);
+ } else
+ self->stats.tx_packets++;
+
+
+ if (self->new_speed) {
+ w83977af_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ /* Unlock tx_buff and request another frame */
+ /* Tell the network layer, that we want more frames */
+ netif_wake_queue(self->netdev);
+
+ /* Restore set */
+ outb(set, iobase+SSR);
+}
+
+/*
+ * Function w83977af_dma_receive (self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+int w83977af_dma_receive(struct w83977af_ir *self)
+{
+ int iobase;
+ __u8 set;
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+ unsigned long flags;
+ __u8 hcr;
+#endif
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+
+ iobase= self->io.fir_base;
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, SET0);
+ outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
+
+ /* Choose DMA Rx, DMA Fairness, and Advanced mode */
+ switch_bank(iobase, SET2);
+ outb((inb(iobase+ADCR1) & ~ADCR1_D_CHSW)/*|ADCR1_DMA_F*/|ADCR1_ADV_SL,
+ iobase+ADCR1);
+
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+ spin_lock_irqsave(&self->lock, flags);
+
+ disable_dma(self->io.dma);
+ clear_dma_ff(self->io.dma);
+ set_dma_mode(self->io.dma, DMA_MODE_READ);
+ set_dma_addr(self->io.dma, self->rx_buff_dma);
+ set_dma_count(self->io.dma, self->rx_buff.truesize);
+#else
+ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+ DMA_MODE_READ);
+#endif
+ /*
+ * Reset Rx FIFO. This will also flush the ST_FIFO, it's very
+ * important that we don't reset the Tx FIFO since it might not
+ * be finished transmitting yet
+ */
+ switch_bank(iobase, SET0);
+ outb(UFR_RXTL|UFR_TXTL|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
+ self->st_fifo.len = self->st_fifo.tail = self->st_fifo.head = 0;
+
+ /* Enable DMA */
+ switch_bank(iobase, SET0);
+#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+ hcr = inb(iobase+HCR);
+ outb(hcr | HCR_EN_DMA, iobase+HCR);
+ enable_dma(self->io.dma);
+ spin_unlock_irqrestore(&self->lock, flags);
+#else
+ outb(inb(iobase+HCR) | HCR_EN_DMA, iobase+HCR);
+#endif
+ /* Restore set */
+ outb(set, iobase+SSR);
+
+ return 0;
+}
+
+/*
+ * Function w83977af_receive_complete (self)
+ *
+ * Finished with receiving a frame
+ *
+ */
+int w83977af_dma_receive_complete(struct w83977af_ir *self)
+{
+ struct sk_buff *skb;
+ struct st_fifo *st_fifo;
+ int len;
+ int iobase;
+ __u8 set;
+ __u8 status;
+
+ IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+
+ st_fifo = &self->st_fifo;
+
+ iobase = self->io.fir_base;
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ iobase = self->io.fir_base;
+
+ /* Read status FIFO */
+ switch_bank(iobase, SET5);
+ while ((status = inb(iobase+FS_FO)) & FS_FO_FSFDR) {
+ st_fifo->entries[st_fifo->tail].status = status;
+
+ st_fifo->entries[st_fifo->tail].len = inb(iobase+RFLFL);
+ st_fifo->entries[st_fifo->tail].len |= inb(iobase+RFLFH) << 8;
+
+ st_fifo->tail++;
+ st_fifo->len++;
+ }
+
+ while (st_fifo->len) {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ /* Check for errors */
+ if (status & FS_FO_ERR_MSK) {
+ if (status & FS_FO_LST_FR) {
+ /* Add number of lost frames to stats */
+ self->stats.rx_errors += len;
+ } else {
+ /* Skip frame */
+ self->stats.rx_errors++;
+
+ self->rx_buff.data += len;
+
+ if (status & FS_FO_MX_LEX)
+ self->stats.rx_length_errors++;
+
+ if (status & FS_FO_PHY_ERR)
+ self->stats.rx_frame_errors++;
+
+ if (status & FS_FO_CRC_ERR)
+ self->stats.rx_crc_errors++;
+ }
+ /* The errors below can be reported in both cases */
+ if (status & FS_FO_RX_OV)
+ self->stats.rx_fifo_errors++;
+
+ if (status & FS_FO_FSF_OV)
+ self->stats.rx_fifo_errors++;
+
+ } else {
+ /* Check if we have transferred all data to memory */
+ switch_bank(iobase, SET0);
+ if (inb(iobase+USR) & USR_RDR) {
+#ifdef CONFIG_USE_INTERNAL_TIMER
+ /* Put this entry back in fifo */
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->entries[st_fifo->head].status = status;
+ st_fifo->entries[st_fifo->head].len = len;
+
+ /* Restore set register */
+ outb(set, iobase+SSR);
+
+ return FALSE; /* I'll be back! */
+#else
+ udelay(80); /* Should be enough!? */
+#endif
+ }
+
+ skb = dev_alloc_skb(len+1);
+ if (skb == NULL) {
+ printk(KERN_INFO
+ "%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
+ /* Restore set register */
+ outb(set, iobase+SSR);
+
+ return FALSE;
+ }
+
+ /* Align to 20 bytes */
+ skb_reserve(skb, 1);
+
+ /* Copy frame without CRC */
+ if (self->io.speed < 4000000) {
+ skb_put(skb, len-2);
+ memcpy(skb->data, self->rx_buff.data, len-2);
+ } else {
+ skb_put(skb, len-4);
+ memcpy(skb->data, self->rx_buff.data, len-4);
+ }
+
+ /* Move to next frame */
+ self->rx_buff.data += len;
+ self->stats.rx_packets++;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ self->netdev->last_rx = jiffies;
+ }
+ }
+ /* Restore set register */
+ outb(set, iobase+SSR);
+
+ return TRUE;
+}
+
+/*
+ * Function pc87108_pio_receive (self)
+ *
+ * Receive all data in receiver FIFO
+ *
+ */
+static void w83977af_pio_receive(struct w83977af_ir *self)
+{
+ __u8 byte = 0x00;
+ int iobase;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ iobase = self->io.fir_base;
+
+ /* Receive all characters in Rx FIFO */
+ do {
+ byte = inb(iobase+RBR);
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ byte);
+ } while (inb(iobase+USR) & USR_RDR); /* Data available */
+}
+
+/*
+ * Function w83977af_sir_interrupt (self, eir)
+ *
+ * Handle SIR interrupt
+ *
+ */
+static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
+{
+ int actual;
+ __u8 new_icr = 0;
+ __u8 set;
+ int iobase;
+
+ IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr);
+
+ iobase = self->io.fir_base;
+ /* Transmit FIFO low on data */
+ if (isr & ISR_TXTH_I) {
+ /* Write data left in transmit buffer */
+ actual = w83977af_pio_write(self->io.fir_base,
+ self->tx_buff.data,
+ self->tx_buff.len,
+ self->io.fifo_size);
+
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+
+ self->io.direction = IO_XMIT;
+
+ /* Check if finished */
+ if (self->tx_buff.len > 0) {
+ new_icr |= ICR_ETXTHI;
+ } else {
+ set = inb(iobase+SSR);
+ switch_bank(iobase, SET0);
+ outb(AUDR_SFEND, iobase+AUDR);
+ outb(set, iobase+SSR);
+
+ self->stats.tx_packets++;
+
+ /* Feed me more packets */
+ netif_wake_queue(self->netdev);
+ new_icr |= ICR_ETBREI;
+ }
+ }
+ /* Check if transmission has completed */
+ if (isr & ISR_TXEMP_I) {
+ /* Check if we need to change the speed? */
+ if (self->new_speed) {
+ IRDA_DEBUG(2,
+ "%s(), Changing speed!\n", __FUNCTION__ );
+ w83977af_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ }
+
+ /* Turn around and get ready to receive some data */
+ self->io.direction = IO_RECV;
+ new_icr |= ICR_ERBRI;
+ }
+
+ /* Rx FIFO threshold or timeout */
+ if (isr & ISR_RXTH_I) {
+ w83977af_pio_receive(self);
+
+ /* Keep receiving */
+ new_icr |= ICR_ERBRI;
+ }
+ return new_icr;
+}
+
+/*
+ * Function pc87108_fir_interrupt (self, eir)
+ *
+ * Handle MIR/FIR interrupt
+ *
+ */
+static __u8 w83977af_fir_interrupt(struct w83977af_ir *self, int isr)
+{
+ __u8 new_icr = 0;
+ __u8 set;
+ int iobase;
+
+ iobase = self->io.fir_base;
+ set = inb(iobase+SSR);
+
+ /* End of frame detected in FIFO */
+ if (isr & (ISR_FEND_I|ISR_FSF_I)) {
+ if (w83977af_dma_receive_complete(self)) {
+
+ /* Wait for next status FIFO interrupt */
+ new_icr |= ICR_EFSFI;
+ } else {
+ /* DMA not finished yet */
+
+ /* Set timer value, resolution 1 ms */
+ switch_bank(iobase, SET4);
+ outb(0x01, iobase+TMRL); /* 1 ms */
+ outb(0x00, iobase+TMRH);
+
+ /* Start timer */
+ outb(IR_MSL_EN_TMR, iobase+IR_MSL);
+
+ new_icr |= ICR_ETMRI;
+ }
+ }
+ /* Timer finished */
+ if (isr & ISR_TMR_I) {
+ /* Disable timer */
+ switch_bank(iobase, SET4);
+ outb(0, iobase+IR_MSL);
+
+ /* Clear timer event */
+ /* switch_bank(iobase, SET0); */
+/* outb(ASCR_CTE, iobase+ASCR); */
+
+ /* Check if this is a TX timer interrupt */
+ if (self->io.direction == IO_XMIT) {
+ w83977af_dma_write(self, iobase);
+
+ new_icr |= ICR_EDMAI;
+ } else {
+ /* Check if DMA has now finished */
+ w83977af_dma_receive_complete(self);
+
+ new_icr |= ICR_EFSFI;
+ }
+ }
+ /* Finished with DMA */
+ if (isr & ISR_DMA_I) {
+ w83977af_dma_xmit_complete(self);
+
+ /* Check if there are more frames to be transmitted */
+ /* if (irda_device_txqueue_empty(self)) { */
+
+ /* Prepare for receive
+ *
+ * ** Netwinder Tx DMA likes that we do this anyway **
+ */
+ w83977af_dma_receive(self);
+ new_icr = ICR_EFSFI;
+ /* } */
+ }
+
+ /* Restore set */
+ outb(set, iobase+SSR);
+
+ return new_icr;
+}
+
+/*
+ * Function w83977af_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t w83977af_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct w83977af_ir *self;
+ __u8 set, icr, isr;
+ int iobase;
+
+ if (!dev) {
+ printk(KERN_WARNING "%s: irq %d for unknown device.\n",
+ driver_name, irq);
+ return IRQ_NONE;
+ }
+ self = (struct w83977af_ir *) dev->priv;
+
+ iobase = self->io.fir_base;
+
+ /* Save current bank */
+ set = inb(iobase+SSR);
+ switch_bank(iobase, SET0);
+
+ icr = inb(iobase+ICR);
+ isr = inb(iobase+ISR) & icr; /* Mask out the interesting ones */
+
+ outb(0, iobase+ICR); /* Disable interrupts */
+
+ if (isr) {
+ /* Dispatch interrupt handler for the current speed */
+ if (self->io.speed > PIO_MAX_SPEED )
+ icr = w83977af_fir_interrupt(self, isr);
+ else
+ icr = w83977af_sir_interrupt(self, isr);
+ }
+
+ outb(icr, iobase+ICR); /* Restore (new) interrupts */
+ outb(set, iobase+SSR); /* Restore bank register */
+ return IRQ_RETVAL(isr);
+}
+
+/*
+ * Function w83977af_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int w83977af_is_receiving(struct w83977af_ir *self)
+{
+ int status = FALSE;
+ int iobase;
+ __u8 set;
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ if (self->io.speed > 115200) {
+ iobase = self->io.fir_base;
+
+ /* Check if rx FIFO is not empty */
+ set = inb(iobase+SSR);
+ switch_bank(iobase, SET2);
+ if ((inb(iobase+RXFDTH) & 0x3f) != 0) {
+ /* We are receiving something */
+ status = TRUE;
+ }
+ outb(set, iobase+SSR);
+ } else
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+
+ return status;
+}
+
+/*
+ * Function w83977af_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int w83977af_net_open(struct net_device *dev)
+{
+ struct w83977af_ir *self;
+ int iobase;
+ char hwname[32];
+ __u8 set;
+
+ IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct w83977af_ir *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ if (request_irq(self->io.irq, w83977af_interrupt, 0, dev->name,
+ (void *) dev)) {
+ return -EAGAIN;
+ }
+ /*
+ * Always allocate the DMA channel after the IRQ,
+ * and clean up on failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ free_irq(self->io.irq, self);
+ return -EAGAIN;
+ }
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Enable some interrupts so we can receive frames again */
+ switch_bank(iobase, SET0);
+ if (self->io.speed > 115200) {
+ outb(ICR_EFSFI, iobase+ICR);
+ w83977af_dma_receive(self);
+ } else
+ outb(ICR_ERBRI, iobase+ICR);
+
+ /* Restore bank register */
+ outb(set, iobase+SSR);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /* Give self a hardware name */
+ sprintf(hwname, "w83977af @ 0x%03x", self->io.fir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ return 0;
+}
+
+/*
+ * Function w83977af_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int w83977af_net_close(struct net_device *dev)
+{
+ struct w83977af_ir *self;
+ int iobase;
+ __u8 set;
+
+ IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = (struct w83977af_ir *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ disable_dma(self->io.dma);
+
+ /* Save current set */
+ set = inb(iobase+SSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, SET0);
+ outb(0, iobase+ICR);
+
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ /* Restore bank register */
+ outb(set, iobase+SSR);
+
+ return 0;
+}
+
+/*
+ * Function w83977af_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct w83977af_ir *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ goto out;
+ }
+ w83977af_change_speed(self, irq->ifr_baudrate);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ goto out;
+ }
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = w83977af_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+out:
+ spin_unlock_irqrestore(&self->lock, flags);
+ return ret;
+}
+
+static struct net_device_stats *w83977af_net_get_stats(struct net_device *dev)
+{
+ struct w83977af_ir *self = (struct w83977af_ir *) dev->priv;
+
+ return &self->stats;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Winbond W83977AF IrDA Device Driver");
+MODULE_LICENSE("GPL");
+
+
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "Base I/O addresses");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ lines");
+
+/*
+ * Function init_module (void)
+ *
+ *
+ *
+ */
+module_init(w83977af_init);
+
+/*
+ * Function cleanup_module (void)
+ *
+ *
+ *
+ */
+module_exit(w83977af_cleanup);
diff --git a/drivers/net/irda/w83977af_ir.h b/drivers/net/irda/w83977af_ir.h
new file mode 100644
index 000000000000..0b7661deafee
--- /dev/null
+++ b/drivers/net/irda/w83977af_ir.h
@@ -0,0 +1,199 @@
+/*********************************************************************
+ *
+ * Filename: w83977af_ir.h
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Paul VanderSpek
+ * Created at: Thu Nov 19 13:55:34 1998
+ * Modified at: Tue Jan 11 13:08:19 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsų admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef W83977AF_IR_H
+#define W83977AF_IR_H
+
+#include <asm/io.h>
+#include <linux/types.h>
+
+/* Flags for configuration register CRF0 */
+#define ENBNKSEL 0x01
+#define APEDCRC 0x02
+#define TXW4C 0x04
+#define RXW4C 0x08
+
+/* Bank 0 */
+#define RBR 0x00 /* Receiver buffer register */
+#define TBR 0x00 /* Transmitter buffer register */
+
+#define ICR 0x01 /* Interrupt configuration register */
+#define ICR_ERBRI 0x01 /* Receiver buffer register interrupt */
+#define ICR_ETBREI 0x02 /* Transeiver empty interrupt */
+#define ICR_EUSRI 0x04//* IR status interrupt */
+#define ICR_EHSRI 0x04
+#define ICR_ETXURI 0x04 /* Tx underrun */
+#define ICR_EDMAI 0x10 /* DMA interrupt */
+#define ICR_ETXTHI 0x20 /* Transmitter threshold interrupt */
+#define ICR_EFSFI 0x40 /* Frame status FIFO interrupt */
+#define ICR_ETMRI 0x80 /* Timer interrupt */
+
+#define UFR 0x02 /* FIFO control register */
+#define UFR_EN_FIFO 0x01 /* Enable FIFO's */
+#define UFR_RXF_RST 0x02 /* Reset Rx FIFO */
+#define UFR_TXF_RST 0x04 /* Reset Tx FIFO */
+#define UFR_RXTL 0x80 /* Rx FIFO threshold (set to 16) */
+#define UFR_TXTL 0x20 /* Tx FIFO threshold (set to 17) */
+
+#define ISR 0x02 /* Interrupt status register */
+#define ISR_RXTH_I 0x01 /* Receive threshold interrupt */
+#define ISR_TXEMP_I 0x02 /* Transmitter empty interrupt */
+#define ISR_FEND_I 0x04
+#define ISR_DMA_I 0x10
+#define ISR_TXTH_I 0x20 /* Transmitter threshold interrupt */
+#define ISR_FSF_I 0x40
+#define ISR_TMR_I 0x80 /* Timer interrupt */
+
+#define UCR 0x03 /* Uart control register */
+#define UCR_DLS8 0x03 /* 8N1 */
+
+#define SSR 0x03 /* Sets select register */
+#define SET0 UCR_DLS8 /* Make sure we keep 8N1 */
+#define SET1 (0x80|UCR_DLS8) /* Make sure we keep 8N1 */
+#define SET2 0xE0
+#define SET3 0xE4
+#define SET4 0xE8
+#define SET5 0xEC
+#define SET6 0xF0
+#define SET7 0xF4
+
+#define HCR 0x04
+#define HCR_MODE_MASK ~(0xD0)
+#define HCR_SIR 0x60
+#define HCR_MIR_576 0x20
+#define HCR_MIR_1152 0x80
+#define HCR_FIR 0xA0
+#define HCR_EN_DMA 0x04
+#define HCR_EN_IRQ 0x08
+#define HCR_TX_WT 0x08
+
+#define USR 0x05 /* IR status register */
+#define USR_RDR 0x01 /* Receive data ready */
+#define USR_TSRE 0x40 /* Transmitter empty? */
+
+#define AUDR 0x07
+#define AUDR_SFEND 0x08 /* Set a frame end */
+#define AUDR_RXBSY 0x20 /* Rx busy */
+#define AUDR_UNDR 0x40 /* Transeiver underrun */
+
+/* Set 2 */
+#define ABLL 0x00 /* Advanced baud rate divisor latch (low byte) */
+#define ABHL 0x01 /* Advanced baud rate divisor latch (high byte) */
+
+#define ADCR1 0x02
+#define ADCR1_ADV_SL 0x01
+#define ADCR1_D_CHSW 0x08 /* the specs are wrong. its bit 3, not 4 */
+#define ADCR1_DMA_F 0x02
+
+#define ADCR2 0x04
+#define ADCR2_TXFS32 0x01
+#define ADCR2_RXFS32 0x04
+
+#define RXFDTH 0x07
+
+/* Set 3 */
+#define AUID 0x00
+
+/* Set 4 */
+#define TMRL 0x00 /* Timer value register (low byte) */
+#define TMRH 0x01 /* Timer value register (high byte) */
+
+#define IR_MSL 0x02 /* Infrared mode select */
+#define IR_MSL_EN_TMR 0x01 /* Enable timer */
+
+#define TFRLL 0x04 /* Transmitter frame length (low byte) */
+#define TFRLH 0x05 /* Transmitter frame length (high byte) */
+#define RFRLL 0x06 /* Receiver frame length (low byte) */
+#define RFRLH 0x07 /* Receiver frame length (high byte) */
+
+/* Set 5 */
+
+#define FS_FO 0x05 /* Frame status FIFO */
+#define FS_FO_FSFDR 0x80 /* Frame status FIFO data ready */
+#define FS_FO_LST_FR 0x40 /* Frame lost */
+#define FS_FO_MX_LEX 0x10 /* Max frame len exceeded */
+#define FS_FO_PHY_ERR 0x08 /* Physical layer error */
+#define FS_FO_CRC_ERR 0x04
+#define FS_FO_RX_OV 0x02 /* Receive overrun */
+#define FS_FO_FSF_OV 0x01 /* Frame status FIFO overrun */
+#define FS_FO_ERR_MSK 0x5f /* Error mask */
+
+#define RFLFL 0x06
+#define RFLFH 0x07
+
+/* Set 6 */
+#define IR_CFG2 0x00
+#define IR_CFG2_DIS_CRC 0x02
+
+/* Set 7 */
+#define IRM_CR 0x07 /* Infrared module control register */
+#define IRM_CR_IRX_MSL 0x40
+#define IRM_CR_AF_MNT 0x80 /* Automatic format */
+
+/* For storing entries in the status FIFO */
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[10];
+ int head;
+ int tail;
+ int len;
+};
+
+/* Private data for each instance */
+struct w83977af_ir {
+ struct st_fifo st_fifo;
+
+ int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
+ int tx_len; /* Number of frames in tx_buff */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ /* Note : currently locking is *very* incomplete, but this
+ * will get you started. Check in nsc-ircc.c for a proper
+ * locking strategy. - Jean II */
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+};
+
+static inline void switch_bank( int iobase, int set)
+{
+ outb(set, iobase+SSR);
+}
+
+#endif