Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 13 insertions, 18 deletions

diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index af35e1ddadd6..88a08f056241 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -26,6 +26,8 @@
 
 *******************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "ixgb.h"
 
 /* This is the only thing that needs to be changed to adjust the
@@ -209,16 +211,16 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			printk(KERN_INFO "%s Enabled\n", opt->name);
+			pr_info("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			printk(KERN_INFO "%s Disabled\n", opt->name);
+			pr_info("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			printk(KERN_INFO "%s set to %i\n", opt->name, *value);
+			pr_info("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
@@ -230,7 +232,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					printk(KERN_INFO "%s\n", ent->str);
+					pr_info("%s\n", ent->str);
 				return 0;
 			}
 		}
@@ -240,8 +242,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
 		BUG();
 	}
 
-	printk(KERN_INFO "Invalid %s specified (%i) %s\n",
-		   opt->name, *value, opt->err);
+	pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
 }
@@ -261,9 +262,8 @@ ixgb_check_options(struct ixgb_adapter *adapter)
 {
 	int bd = adapter->bd_number;
 	if (bd >= IXGB_MAX_NIC) {
-		printk(KERN_NOTICE
-			   "Warning: no configuration for board #%i\n", bd);
-		printk(KERN_NOTICE "Using defaults for all values\n");
+		pr_notice("Warning: no configuration for board #%i\n", bd);
+		pr_notice("Using defaults for all values\n");
 	}
 
 	{ /* Transmit Descriptor Count */
@@ -363,8 +363,7 @@ ixgb_check_options(struct ixgb_adapter *adapter)
 			adapter->hw.fc.high_water = opt.def;
 		}
 		if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
-			printk(KERN_INFO
-				"Ignoring RxFCHighThresh when no RxFC\n");
+			pr_info("Ignoring RxFCHighThresh when no RxFC\n");
 	}
 	{ /* Receive Flow Control Low Threshold */
 		const struct ixgb_option opt = {
@@ -383,8 +382,7 @@ ixgb_check_options(struct ixgb_adapter *adapter)
 			adapter->hw.fc.low_water = opt.def;
 		}
 		if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
-			printk(KERN_INFO
-				"Ignoring RxFCLowThresh when no RxFC\n");
+			pr_info("Ignoring RxFCLowThresh when no RxFC\n");
 	}
 	{ /* Flow Control Pause Time Request*/
 		const struct ixgb_option opt = {
@@ -404,17 +402,14 @@ ixgb_check_options(struct ixgb_adapter *adapter)
 			adapter->hw.fc.pause_time = opt.def;
 		}
 		if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
-			printk(KERN_INFO
-				"Ignoring FCReqTimeout when no RxFC\n");
+			pr_info("Ignoring FCReqTimeout when no RxFC\n");
 	}
 	/* high low and spacing check for rx flow control thresholds */
 	if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
 		/* high must be greater than low */
 		if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
 			/* set defaults */
-			printk(KERN_INFO
-				"RxFCHighThresh must be >= (RxFCLowThresh + 8), "
-				"Using Defaults\n");
+			pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
 			adapter->hw.fc.high_water = DEFAULT_FCRTH;
 			adapter->hw.fc.low_water  = DEFAULT_FCRTL;
 		}