summaryrefslogtreecommitdiff
path: root/drivers/net/mace.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/mace.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/mace.h')
-rw-r--r--drivers/net/mace.h173
1 files changed, 173 insertions, 0 deletions
diff --git a/drivers/net/mace.h b/drivers/net/mace.h
new file mode 100644
index 000000000000..30b7ec0cedb5
--- /dev/null
+++ b/drivers/net/mace.h
@@ -0,0 +1,173 @@
+/*
+ * mace.h - definitions for the registers in the Am79C940 MACE
+ * (Medium Access Control for Ethernet) controller.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define REG(x) volatile unsigned char x; char x ## _pad[15]
+
+struct mace {
+ REG(rcvfifo); /* receive FIFO */
+ REG(xmtfifo); /* transmit FIFO */
+ REG(xmtfc); /* transmit frame control */
+ REG(xmtfs); /* transmit frame status */
+ REG(xmtrc); /* transmit retry count */
+ REG(rcvfc); /* receive frame control */
+ REG(rcvfs); /* receive frame status (4 bytes) */
+ REG(fifofc); /* FIFO frame count */
+ REG(ir); /* interrupt register */
+ REG(imr); /* interrupt mask register */
+ REG(pr); /* poll register */
+ REG(biucc); /* bus interface unit config control */
+ REG(fifocc); /* FIFO configuration control */
+ REG(maccc); /* medium access control config control */
+ REG(plscc); /* phys layer signalling config control */
+ REG(phycc); /* physical configuration control */
+ REG(chipid_lo); /* chip ID, lsb */
+ REG(chipid_hi); /* chip ID, msb */
+ REG(iac); /* internal address config */
+ REG(reg19);
+ REG(ladrf); /* logical address filter (8 bytes) */
+ REG(padr); /* physical address (6 bytes) */
+ REG(reg22);
+ REG(reg23);
+ REG(mpc); /* missed packet count (clears when read) */
+ REG(reg25);
+ REG(rntpc); /* runt packet count (clears when read) */
+ REG(rcvcc); /* recv collision count (clears when read) */
+ REG(reg28);
+ REG(utr); /* user test reg */
+ REG(reg30);
+ REG(reg31);
+};
+
+/* Bits in XMTFC */
+#define DRTRY 0x80 /* don't retry transmission after collision */
+#define DXMTFCS 0x08 /* don't append FCS to transmitted frame */
+#define AUTO_PAD_XMIT 0x01 /* auto-pad short packets on transmission */
+
+/* Bits in XMTFS: only valid when XMTSV is set in PR and XMTFS */
+#define XMTSV 0x80 /* transmit status (i.e. XMTFS) valid */
+#define UFLO 0x40 /* underflow - xmit fifo ran dry */
+#define LCOL 0x20 /* late collision (transmission aborted) */
+#define MORE 0x10 /* 2 or more retries needed to xmit frame */
+#define ONE 0x08 /* 1 retry needed to xmit frame */
+#define DEFER 0x04 /* MACE had to defer xmission (enet busy) */
+#define LCAR 0x02 /* loss of carrier (transmission aborted) */
+#define RTRY 0x01 /* too many retries (transmission aborted) */
+
+/* Bits in XMTRC: only valid when XMTSV is set in PR (and XMTFS) */
+#define EXDEF 0x80 /* had to defer for excessive time */
+#define RETRY_MASK 0x0f /* number of retries (0 - 15) */
+
+/* Bits in RCVFC */
+#define LLRCV 0x08 /* low latency receive: early DMA request */
+#define M_RBAR 0x04 /* sets function of EAM/R pin */
+#define AUTO_STRIP_RCV 0x01 /* auto-strip short LLC frames on recv */
+
+/*
+ * Bits in RCVFS. After a frame is received, four bytes of status
+ * are automatically read from this register and appended to the frame
+ * data in memory. These are:
+ * Byte 0 and 1: message byte count and frame status
+ * Byte 2: runt packet count
+ * Byte 3: receive collision count
+ */
+#define RS_OFLO 0x8000 /* receive FIFO overflowed */
+#define RS_CLSN 0x4000 /* received frame suffered (late) collision */
+#define RS_FRAMERR 0x2000 /* framing error flag */
+#define RS_FCSERR 0x1000 /* frame had FCS error */
+#define RS_COUNT 0x0fff /* mask for byte count field */
+
+/* Bits (fields) in FIFOFC */
+#define RCVFC_SH 4 /* receive frame count in FIFO */
+#define RCVFC_MASK 0x0f
+#define XMTFC_SH 0 /* transmit frame count in FIFO */
+#define XMTFC_MASK 0x0f
+
+/*
+ * Bits in IR and IMR. The IR clears itself when read.
+ * Setting a bit in the IMR will disable the corresponding interrupt.
+ */
+#define JABBER 0x80 /* jabber error - 10baseT xmission too long */
+#define BABBLE 0x40 /* babble - xmitter xmitting for too long */
+#define CERR 0x20 /* collision err - no SQE test (heartbeat) */
+#define RCVCCO 0x10 /* RCVCC overflow */
+#define RNTPCO 0x08 /* RNTPC overflow */
+#define MPCO 0x04 /* MPC overflow */
+#define RCVINT 0x02 /* receive interrupt */
+#define XMTINT 0x01 /* transmitter interrupt */
+
+/* Bits in PR */
+#define XMTSV 0x80 /* XMTFS valid (same as in XMTFS) */
+#define TDTREQ 0x40 /* set when xmit fifo is requesting data */
+#define RDTREQ 0x20 /* set when recv fifo requests data xfer */
+
+/* Bits in BIUCC */
+#define BSWP 0x40 /* byte swap, i.e. big-endian bus */
+#define XMTSP_4 0x00 /* start xmitting when 4 bytes in FIFO */
+#define XMTSP_16 0x10 /* start xmitting when 16 bytes in FIFO */
+#define XMTSP_64 0x20 /* start xmitting when 64 bytes in FIFO */
+#define XMTSP_112 0x30 /* start xmitting when 112 bytes in FIFO */
+#define SWRST 0x01 /* software reset */
+
+/* Bits in FIFOCC */
+#define XMTFW_8 0x00 /* xmit fifo watermark = 8 words free */
+#define XMTFW_16 0x40 /* 16 words free */
+#define XMTFW_32 0x80 /* 32 words free */
+#define RCVFW_16 0x00 /* recv fifo watermark = 16 bytes avail */
+#define RCVFW_32 0x10 /* 32 bytes avail */
+#define RCVFW_64 0x20 /* 64 bytes avail */
+#define XMTFWU 0x08 /* xmit fifo watermark update enable */
+#define RCVFWU 0x04 /* recv fifo watermark update enable */
+#define XMTBRST 0x02 /* enable transmit burst mode */
+#define RCVBRST 0x01 /* enable receive burst mode */
+
+/* Bits in MACCC */
+#define PROM 0x80 /* promiscuous mode */
+#define DXMT2PD 0x40 /* disable xmit two-part deferral algorithm */
+#define EMBA 0x20 /* enable modified backoff algorithm */
+#define DRCVPA 0x08 /* disable receiving physical address */
+#define DRCVBC 0x04 /* disable receiving broadcasts */
+#define ENXMT 0x02 /* enable transmitter */
+#define ENRCV 0x01 /* enable receiver */
+
+/* Bits in PLSCC */
+#define XMTSEL 0x08 /* select DO+/DO- state when idle */
+#define PORTSEL_AUI 0x00 /* select AUI port */
+#define PORTSEL_10T 0x02 /* select 10Base-T port */
+#define PORTSEL_DAI 0x04 /* select DAI port */
+#define PORTSEL_GPSI 0x06 /* select GPSI port */
+#define ENPLSIO 0x01 /* enable optional PLS I/O pins */
+
+/* Bits in PHYCC */
+#define LNKFL 0x80 /* reports 10Base-T link failure */
+#define DLNKTST 0x40 /* disable 10Base-T link test */
+#define REVPOL 0x20 /* 10Base-T receiver polarity reversed */
+#define DAPC 0x10 /* disable auto receiver polarity correction */
+#define LRT 0x08 /* low receive threshold for long links */
+#define ASEL 0x04 /* auto-select AUI or 10Base-T port */
+#define RWAKE 0x02 /* remote wake function */
+#define AWAKE 0x01 /* auto wake function */
+
+/* Bits in IAC */
+#define ADDRCHG 0x80 /* request address change */
+#define PHYADDR 0x04 /* access physical address */
+#define LOGADDR 0x02 /* access multicast filter */
+
+/* Bits in UTR */
+#define RTRE 0x80 /* reserved test register enable. DON'T SET. */
+#define RTRD 0x40 /* reserved test register disable. Sticky */
+#define RPAC 0x20 /* accept runt packets */
+#define FCOLL 0x10 /* force collision */
+#define RCVFCSE 0x08 /* receive FCS enable */
+#define LOOP_NONE 0x00 /* no loopback */
+#define LOOP_EXT 0x02 /* external loopback */
+#define LOOP_INT 0x04 /* internal loopback, excludes MENDEC */
+#define LOOP_MENDEC 0x06 /* internal loopback, includes MENDEC */