diff options
| author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-05-13 02:51:01 -0700 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-11 02:41:47 -0700 |
| commit | 86387e1ac4fcaa45ff5578013a78593d1a0ba279 (patch) | |
| tree | 25c662fa8226419e73c72873888634fe1df04693 /drivers/net/s2io.c | |
| parent | 93f7848b77bcf1108879defd32612422ae80d785 (diff) | |
s2io/vxge: Move the Exar drivers
Move the Exar drivers into drivers/net/ethernet/neterion/ and make the
necessary Kconfig and Makefile changes.
CC: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/s2io.c')
| -rw-r--r-- | drivers/net/s2io.c | 8674 |
1 files changed, 0 insertions, 8674 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c deleted file mode 100644 index 277d48b0800a..000000000000 --- a/drivers/net/s2io.c +++ /dev/null @@ -1,8674 +0,0 @@ -/************************************************************************ - * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC - * Copyright(c) 2002-2010 Exar Corp. - * - * This software may be used and distributed according to the terms of - * the GNU General Public License (GPL), incorporated herein by reference. - * Drivers based on or derived from this code fall under the GPL and must - * retain the authorship, copyright and license notice. This file is not - * a complete program and may only be used when the entire operating - * system is licensed under the GPL. - * See the file COPYING in this distribution for more information. - * - * Credits: - * Jeff Garzik : For pointing out the improper error condition - * check in the s2io_xmit routine and also some - * issues in the Tx watch dog function. Also for - * patiently answering all those innumerable - * questions regaring the 2.6 porting issues. - * Stephen Hemminger : Providing proper 2.6 porting mechanism for some - * macros available only in 2.6 Kernel. - * Francois Romieu : For pointing out all code part that were - * deprecated and also styling related comments. - * Grant Grundler : For helping me get rid of some Architecture - * dependent code. - * Christopher Hellwig : Some more 2.6 specific issues in the driver. - * - * The module loadable parameters that are supported by the driver and a brief - * explanation of all the variables. - * - * rx_ring_num : This can be used to program the number of receive rings used - * in the driver. - * rx_ring_sz: This defines the number of receive blocks each ring can have. - * This is also an array of size 8. - * rx_ring_mode: This defines the operation mode of all 8 rings. The valid - * values are 1, 2. - * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. - * tx_fifo_len: This too is an array of 8. Each element defines the number of - * Tx descriptors that can be associated with each corresponding FIFO. - * intr_type: This defines the type of interrupt. The values can be 0(INTA), - * 2(MSI_X). Default value is '2(MSI_X)' - * lro_max_pkts: This parameter defines maximum number of packets can be - * aggregated as a single large packet - * napi: This parameter used to enable/disable NAPI (polling Rx) - * Possible values '1' for enable and '0' for disable. Default is '1' - * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO) - * Possible values '1' for enable and '0' for disable. Default is '0' - * vlan_tag_strip: This can be used to enable or disable vlan stripping. - * Possible values '1' for enable , '0' for disable. - * Default is '2' - which means disable in promisc mode - * and enable in non-promiscuous mode. - * multiq: This parameter used to enable/disable MULTIQUEUE support. - * Possible values '1' for enable and '0' for disable. Default is '0' - ************************************************************************/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/mdio.h> -#include <linux/skbuff.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/stddef.h> -#include <linux/ioctl.h> -#include <linux/timex.h> -#include <linux/ethtool.h> -#include <linux/workqueue.h> -#include <linux/if_vlan.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/uaccess.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/prefetch.h> -#include <net/tcp.h> - -#include <asm/system.h> -#include <asm/div64.h> -#include <asm/irq.h> - -/* local include */ -#include "s2io.h" -#include "s2io-regs.h" - -#define DRV_VERSION "2.0.26.28" - -/* S2io Driver name & version. */ -static const char s2io_driver_name[] = "Neterion"; -static const char s2io_driver_version[] = DRV_VERSION; - -static const int rxd_size[2] = {32, 48}; -static const int rxd_count[2] = {127, 85}; - -static inline int RXD_IS_UP2DT(struct RxD_t *rxdp) -{ - int ret; - - ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) && - (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK)); - - return ret; -} - -/* - * Cards with following subsystem_id have a link state indication - * problem, 600B, 600C, 600D, 640B, 640C and 640D. - * macro below identifies these cards given the subsystem_id. - */ -#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \ - (dev_type == XFRAME_I_DEVICE) ? \ - ((((subid >= 0x600B) && (subid <= 0x600D)) || \ - ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0 - -#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \ - ADAPTER_STATUS_RMAC_LOCAL_FAULT))) - -static inline int is_s2io_card_up(const struct s2io_nic *sp) -{ - return test_bit(__S2IO_STATE_CARD_UP, &sp->state); -} - -/* Ethtool related variables and Macros. */ -static const char s2io_gstrings[][ETH_GSTRING_LEN] = { - "Register test\t(offline)", - "Eeprom test\t(offline)", - "Link test\t(online)", - "RLDRAM test\t(offline)", - "BIST Test\t(offline)" -}; - -static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = { - {"tmac_frms"}, - {"tmac_data_octets"}, - {"tmac_drop_frms"}, - {"tmac_mcst_frms"}, - {"tmac_bcst_frms"}, - {"tmac_pause_ctrl_frms"}, - {"tmac_ttl_octets"}, - {"tmac_ucst_frms"}, - {"tmac_nucst_frms"}, - {"tmac_any_err_frms"}, - {"tmac_ttl_less_fb_octets"}, - {"tmac_vld_ip_octets"}, - {"tmac_vld_ip"}, - {"tmac_drop_ip"}, - {"tmac_icmp"}, - {"tmac_rst_tcp"}, - {"tmac_tcp"}, - {"tmac_udp"}, - {"rmac_vld_frms"}, - {"rmac_data_octets"}, - {"rmac_fcs_err_frms"}, - {"rmac_drop_frms"}, - {"rmac_vld_mcst_frms"}, - {"rmac_vld_bcst_frms"}, - {"rmac_in_rng_len_err_frms"}, - {"rmac_out_rng_len_err_frms"}, - {"rmac_long_frms"}, - {"rmac_pause_ctrl_frms"}, - {"rmac_unsup_ctrl_frms"}, - {"rmac_ttl_octets"}, - {"rmac_accepted_ucst_frms"}, - {"rmac_accepted_nucst_frms"}, - {"rmac_discarded_frms"}, - {"rmac_drop_events"}, - {"rmac_ttl_less_fb_octets"}, - {"rmac_ttl_frms"}, - {"rmac_usized_frms"}, - {"rmac_osized_frms"}, - {"rmac_frag_frms"}, - {"rmac_jabber_frms"}, - {"rmac_ttl_64_frms"}, - {"rmac_ttl_65_127_frms"}, - {"rmac_ttl_128_255_frms"}, - {"rmac_ttl_256_511_frms"}, - {"rmac_ttl_512_1023_frms"}, - {"rmac_ttl_1024_1518_frms"}, - {"rmac_ip"}, - {"rmac_ip_octets"}, - {"rmac_hdr_err_ip"}, - {"rmac_drop_ip"}, - {"rmac_icmp"}, - {"rmac_tcp"}, - {"rmac_udp"}, - {"rmac_err_drp_udp"}, - {"rmac_xgmii_err_sym"}, - {"rmac_frms_q0"}, - {"rmac_frms_q1"}, - {"rmac_frms_q2"}, - {"rmac_frms_q3"}, - {"rmac_frms_q4"}, - {"rmac_frms_q5"}, - {"rmac_frms_q6"}, - {"rmac_frms_q7"}, - {"rmac_full_q0"}, - {"rmac_full_q1"}, - {"rmac_full_q2"}, - {"rmac_full_q3"}, - {"rmac_full_q4"}, - {"rmac_full_q5"}, - {"rmac_full_q6"}, - {"rmac_full_q7"}, - {"rmac_pause_cnt"}, - {"rmac_xgmii_data_err_cnt"}, - {"rmac_xgmii_ctrl_err_cnt"}, - {"rmac_accepted_ip"}, - {"rmac_err_tcp"}, - {"rd_req_cnt"}, - {"new_rd_req_cnt"}, - {"new_rd_req_rtry_cnt"}, - {"rd_rtry_cnt"}, - {"wr_rtry_rd_ack_cnt"}, - {"wr_req_cnt"}, - {"new_wr_req_cnt"}, - {"new_wr_req_rtry_cnt"}, - {"wr_rtry_cnt"}, - {"wr_disc_cnt"}, - {"rd_rtry_wr_ack_cnt"}, - {"txp_wr_cnt"}, - {"txd_rd_cnt"}, - {"txd_wr_cnt"}, - {"rxd_rd_cnt"}, - {"rxd_wr_cnt"}, - {"txf_rd_cnt"}, - {"rxf_wr_cnt"} -}; - -static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = { - {"rmac_ttl_1519_4095_frms"}, - {"rmac_ttl_4096_8191_frms"}, - {"rmac_ttl_8192_max_frms"}, - {"rmac_ttl_gt_max_frms"}, - {"rmac_osized_alt_frms"}, - {"rmac_jabber_alt_frms"}, - {"rmac_gt_max_alt_frms"}, - {"rmac_vlan_frms"}, - {"rmac_len_discard"}, - {"rmac_fcs_discard"}, - {"rmac_pf_discard"}, - {"rmac_da_discard"}, - {"rmac_red_discard"}, - {"rmac_rts_discard"}, - {"rmac_ingm_full_discard"}, - {"link_fault_cnt"} -}; - -static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = { - {"\n DRIVER STATISTICS"}, - {"single_bit_ecc_errs"}, - {"double_bit_ecc_errs"}, - {"parity_err_cnt"}, - {"serious_err_cnt"}, - {"soft_reset_cnt"}, - {"fifo_full_cnt"}, - {"ring_0_full_cnt"}, - {"ring_1_full_cnt"}, - {"ring_2_full_cnt"}, - {"ring_3_full_cnt"}, - {"ring_4_full_cnt"}, - {"ring_5_full_cnt"}, - {"ring_6_full_cnt"}, - {"ring_7_full_cnt"}, - {"alarm_transceiver_temp_high"}, - {"alarm_transceiver_temp_low"}, - {"alarm_laser_bias_current_high"}, - {"alarm_laser_bias_current_low"}, - {"alarm_laser_output_power_high"}, - {"alarm_laser_output_power_low"}, - {"warn_transceiver_temp_high"}, - {"warn_transceiver_temp_low"}, - {"warn_laser_bias_current_high"}, - {"warn_laser_bias_current_low"}, - {"warn_laser_output_power_high"}, - {"warn_laser_output_power_low"}, - {"lro_aggregated_pkts"}, - {"lro_flush_both_count"}, - {"lro_out_of_sequence_pkts"}, - {"lro_flush_due_to_max_pkts"}, - {"lro_avg_aggr_pkts"}, - {"mem_alloc_fail_cnt"}, - {"pci_map_fail_cnt"}, - {"watchdog_timer_cnt"}, - {"mem_allocated"}, - {"mem_freed"}, - {"link_up_cnt"}, - {"link_down_cnt"}, - {"link_up_time"}, - {"link_down_time"}, - {"tx_tcode_buf_abort_cnt"}, - {"tx_tcode_desc_abort_cnt"}, - {"tx_tcode_parity_err_cnt"}, - {"tx_tcode_link_loss_cnt"}, - {"tx_tcode_list_proc_err_cnt"}, - {"rx_tcode_parity_err_cnt"}, - {"rx_tcode_abort_cnt"}, - {"rx_tcode_parity_abort_cnt"}, - {"rx_tcode_rda_fail_cnt"}, - {"rx_tcode_unkn_prot_cnt"}, - {"rx_tcode_fcs_err_cnt"}, - {"rx_tcode_buf_size_err_cnt"}, - {"rx_tcode_rxd_corrupt_cnt"}, - {"rx_tcode_unkn_err_cnt"}, - {"tda_err_cnt"}, - {"pfc_err_cnt"}, - {"pcc_err_cnt"}, - {"tti_err_cnt"}, - {"tpa_err_cnt"}, - {"sm_err_cnt"}, - {"lso_err_cnt"}, - {"mac_tmac_err_cnt"}, - {"mac_rmac_err_cnt"}, - {"xgxs_txgxs_err_cnt"}, - {"xgxs_rxgxs_err_cnt"}, - {"rc_err_cnt"}, - {"prc_pcix_err_cnt"}, - {"rpa_err_cnt"}, - {"rda_err_cnt"}, - {"rti_err_cnt"}, - {"mc_err_cnt"} -}; - -#define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys) -#define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys) -#define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys) - -#define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN) -#define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN) - -#define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN) -#define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN) - -#define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings) -#define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN) - -#define S2IO_TIMER_CONF(timer, handle, arg, exp) \ - init_timer(&timer); \ - timer.function = handle; \ - timer.data = (unsigned long)arg; \ - mod_timer(&timer, (jiffies + exp)) \ - -/* copy mac addr to def_mac_addr array */ -static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr) -{ - sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr); - sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8); - sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16); - sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24); - sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32); - sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40); -} - -/* - * Constants to be programmed into the Xena's registers, to configure - * the XAUI. - */ - -#define END_SIGN 0x0 -static const u64 herc_act_dtx_cfg[] = { - /* Set address */ - 0x8000051536750000ULL, 0x80000515367500E0ULL, - /* Write data */ - 0x8000051536750004ULL, 0x80000515367500E4ULL, - /* Set address */ - 0x80010515003F0000ULL, 0x80010515003F00E0ULL, - /* Write data */ - 0x80010515003F0004ULL, 0x80010515003F00E4ULL, - /* Set address */ - 0x801205150D440000ULL, 0x801205150D4400E0ULL, - /* Write data */ - 0x801205150D440004ULL, 0x801205150D4400E4ULL, - /* Set address */ - 0x80020515F2100000ULL, 0x80020515F21000E0ULL, - /* Write data */ - 0x80020515F2100004ULL, 0x80020515F21000E4ULL, - /* Done */ - END_SIGN -}; - -static const u64 xena_dtx_cfg[] = { - /* Set address */ - 0x8000051500000000ULL, 0x80000515000000E0ULL, - /* Write data */ - 0x80000515D9350004ULL, 0x80000515D93500E4ULL, - /* Set address */ - 0x8001051500000000ULL, 0x80010515000000E0ULL, - /* Write data */ - 0x80010515001E0004ULL, 0x80010515001E00E4ULL, - /* Set address */ - 0x8002051500000000ULL, 0x80020515000000E0ULL, - /* Write data */ - 0x80020515F2100004ULL, 0x80020515F21000E4ULL, - END_SIGN -}; - -/* - * Constants for Fixing the MacAddress problem seen mostly on - * Alpha machines. - */ -static const u64 fix_mac[] = { - 0x0060000000000000ULL, 0x0060600000000000ULL, - 0x0040600000000000ULL, 0x0000600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0060600000000000ULL, - 0x0020600000000000ULL, 0x0000600000000000ULL, - 0x0040600000000000ULL, 0x0060600000000000ULL, - END_SIGN -}; - -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - - -/* Module Loadable parameters. */ -S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM); -S2IO_PARM_INT(rx_ring_num, 1); -S2IO_PARM_INT(multiq, 0); -S2IO_PARM_INT(rx_ring_mode, 1); -S2IO_PARM_INT(use_continuous_tx_intrs, 1); -S2IO_PARM_INT(rmac_pause_time, 0x100); -S2IO_PARM_INT(mc_pause_threshold_q0q3, 187); -S2IO_PARM_INT(mc_pause_threshold_q4q7, 187); -S2IO_PARM_INT(shared_splits, 0); -S2IO_PARM_INT(tmac_util_period, 5); -S2IO_PARM_INT(rmac_util_period, 5); -S2IO_PARM_INT(l3l4hdr_size, 128); -/* 0 is no steering, 1 is Priority steering, 2 is Default steering */ -S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING); -/* Frequency of Rx desc syncs expressed as power of 2 */ -S2IO_PARM_INT(rxsync_frequency, 3); -/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */ -S2IO_PARM_INT(intr_type, 2); -/* Large receive offload feature */ - -/* Max pkts to be aggregated by LRO at one time. If not specified, - * aggregation happens until we hit max IP pkt size(64K) - */ -S2IO_PARM_INT(lro_max_pkts, 0xFFFF); -S2IO_PARM_INT(indicate_max_pkts, 0); - -S2IO_PARM_INT(napi, 1); -S2IO_PARM_INT(ufo, 0); -S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC); - -static unsigned int tx_fifo_len[MAX_TX_FIFOS] = -{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; -static unsigned int rx_ring_sz[MAX_RX_RINGS] = -{[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; -static unsigned int rts_frm_len[MAX_RX_RINGS] = -{[0 ...(MAX_RX_RINGS - 1)] = 0 }; - -module_param_array(tx_fifo_len, uint, NULL, 0); -module_param_array(rx_ring_sz, uint, NULL, 0); -module_param_array(rts_frm_len, uint, NULL, 0); - -/* - * S2IO device table. - * This table lists all the devices that this driver supports. - */ -static DEFINE_PCI_DEVICE_TABLE(s2io_tbl) = { - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN, - PCI_ANY_ID, PCI_ANY_ID}, - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI, - PCI_ANY_ID, PCI_ANY_ID}, - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN, - PCI_ANY_ID, PCI_ANY_ID}, - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, - PCI_ANY_ID, PCI_ANY_ID}, - {0,} -}; - -MODULE_DEVICE_TABLE(pci, s2io_tbl); - -static struct pci_error_handlers s2io_err_handler = { - .error_detected = s2io_io_error_detected, - .slot_reset = s2io_io_slot_reset, - .resume = s2io_io_resume, -}; - -static struct pci_driver s2io_driver = { - .name = "S2IO", - .id_table = s2io_tbl, - .probe = s2io_init_nic, - .remove = __devexit_p(s2io_rem_nic), - .err_handler = &s2io_err_handler, -}; - -/* A simplifier macro used both by init and free shared_mem Fns(). */ -#define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each) - -/* netqueue manipulation helper functions */ -static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp) -{ - if (!sp->config.multiq) { - int i; - - for (i = 0; i < sp->config.tx_fifo_num; i++) - sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP; - } - netif_tx_stop_all_queues(sp->dev); -} - -static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no) -{ - if (!sp->config.multiq) - sp->mac_control.fifos[fifo_no].queue_state = - FIFO_QUEUE_STOP; - - netif_tx_stop_all_queues(sp->dev); -} - -static inline void s2io_start_all_tx_queue(struct s2io_nic *sp) -{ - if (!sp->config.multiq) { - int i; - - for (i = 0; i < sp->config.tx_fifo_num; i++) - sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; - } - netif_tx_start_all_queues(sp->dev); -} - -static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no) -{ - if (!sp->config.multiq) - sp->mac_control.fifos[fifo_no].queue_state = - FIFO_QUEUE_START; - - netif_tx_start_all_queues(sp->dev); -} - -static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp) -{ - if (!sp->config.multiq) { - int i; - - for (i = 0; i < sp->config.tx_fifo_num; i++) - sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; - } - netif_tx_wake_all_queues(sp->dev); -} - -static inline void s2io_wake_tx_queue( - struct fifo_info *fifo, int cnt, u8 multiq) -{ - - if (multiq) { - if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no)) - netif_wake_subqueue(fifo->dev, fifo->fifo_no); - } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) { - if (netif_queue_stopped(fifo->dev)) { - fifo->queue_state = FIFO_QUEUE_START; - netif_wake_queue(fifo->dev); - } - } -} - -/** - * init_shared_mem - Allocation and Initialization of Memory - * @nic: Device private variable. - * Description: The function allocates all the memory areas shared - * between the NIC and the driver. This includes Tx descriptors, - * Rx descriptors and the statistics block. - */ - -static int init_shared_mem(struct s2io_nic *nic) -{ - u32 size; - void *tmp_v_addr, *tmp_v_addr_next; - dma_addr_t tmp_p_addr, tmp_p_addr_next; - struct RxD_block *pre_rxd_blk = NULL; - int i, j, blk_cnt; - int lst_size, lst_per_page; - struct net_device *dev = nic->dev; - unsigned long tmp; - struct buffAdd *ba; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - unsigned long long mem_allocated = 0; - - /* Allocation and initialization of TXDLs in FIFOs */ - size = 0; - for (i = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - size += tx_cfg->fifo_len; - } - if (size > MAX_AVAILABLE_TXDS) { - DBG_PRINT(ERR_DBG, - "Too many TxDs requested: %d, max supported: %d\n", - size, MAX_AVAILABLE_TXDS); - return -EINVAL; - } - - size = 0; - for (i = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - size = tx_cfg->fifo_len; - /* - * Legal values are from 2 to 8192 - */ - if (size < 2) { - DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - " - "Valid lengths are 2 through 8192\n", - i, size); - return -EINVAL; - } - } - - lst_size = (sizeof(struct TxD) * config->max_txds); - lst_per_page = PAGE_SIZE / lst_size; - - for (i = 0; i < config->tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - int fifo_len = tx_cfg->fifo_len; - int list_holder_size = fifo_len * sizeof(struct list_info_hold); - - fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL); - if (!fifo->list_info) { - DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n"); - return -ENOMEM; - } - mem_allocated += list_holder_size; - } - for (i = 0; i < config->tx_fifo_num; i++) { - int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len, - lst_per_page); - struct fifo_info *fifo = &mac_control->fifos[i]; - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - fifo->tx_curr_put_info.offset = 0; - fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1; - fifo->tx_curr_get_info.offset = 0; - fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1; - fifo->fifo_no = i; - fifo->nic = nic; - fifo->max_txds = MAX_SKB_FRAGS + 2; - fifo->dev = dev; - - for (j = 0; j < page_num; j++) { - int k = 0; - dma_addr_t tmp_p; - void *tmp_v; - tmp_v = pci_alloc_consistent(nic->pdev, - PAGE_SIZE, &tmp_p); - if (!tmp_v) { - DBG_PRINT(INFO_DBG, - "pci_alloc_consistent failed for TxDL\n"); - return -ENOMEM; - } - /* If we got a zero DMA address(can happen on - * certain platforms like PPC), reallocate. - * Store virtual address of page we don't want, - * to be freed later. - */ - if (!tmp_p) { - mac_control->zerodma_virt_addr = tmp_v; - DBG_PRINT(INIT_DBG, - "%s: Zero DMA address for TxDL. " - "Virtual address %p\n", - dev->name, tmp_v); - tmp_v = pci_alloc_consistent(nic->pdev, - PAGE_SIZE, &tmp_p); - if (!tmp_v) { - DBG_PRINT(INFO_DBG, - "pci_alloc_consistent failed for TxDL\n"); - return -ENOMEM; - } - mem_allocated += PAGE_SIZE; - } - while (k < lst_per_page) { - int l = (j * lst_per_page) + k; - if (l == tx_cfg->fifo_len) - break; - fifo->list_info[l].list_virt_addr = - tmp_v + (k * lst_size); - fifo->list_info[l].list_phy_addr = - tmp_p + (k * lst_size); - k++; - } - } - } - - for (i = 0; i < config->tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - size = tx_cfg->fifo_len; - fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL); - if (!fifo->ufo_in_band_v) - return -ENOMEM; - mem_allocated += (size * sizeof(u64)); - } - - /* Allocation and initialization of RXDs in Rings */ - size = 0; - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) { - DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a " - "multiple of RxDs per Block\n", - dev->name, i); - return FAILURE; - } - size += rx_cfg->num_rxd; - ring->block_count = rx_cfg->num_rxd / - (rxd_count[nic->rxd_mode] + 1); - ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count; - } - if (nic->rxd_mode == RXD_MODE_1) - size = (size * (sizeof(struct RxD1))); - else - size = (size * (sizeof(struct RxD3))); - - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - ring->rx_curr_get_info.block_index = 0; - ring->rx_curr_get_info.offset = 0; - ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1; - ring->rx_curr_put_info.block_index = 0; - ring->rx_curr_put_info.offset = 0; - ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1; - ring->nic = nic; - ring->ring_no = i; - - blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1); - /* Allocating all the Rx blocks */ - for (j = 0; j < blk_cnt; j++) { - struct rx_block_info *rx_blocks; - int l; - - rx_blocks = &ring->rx_blocks[j]; - size = SIZE_OF_BLOCK; /* size is always page size */ - tmp_v_addr = pci_alloc_consistent(nic->pdev, size, - &tmp_p_addr); - if (tmp_v_addr == NULL) { - /* - * In case of failure, free_shared_mem() - * is called, which should free any - * memory that was alloced till the - * failure happened. - */ - rx_blocks->block_virt_addr = tmp_v_addr; - return -ENOMEM; - } - mem_allocated += size; - memset(tmp_v_addr, 0, size); - - size = sizeof(struct rxd_info) * - rxd_count[nic->rxd_mode]; - rx_blocks->block_virt_addr = tmp_v_addr; - rx_blocks->block_dma_addr = tmp_p_addr; - rx_blocks->rxds = kmalloc(size, GFP_KERNEL); - if (!rx_blocks->rxds) - return -ENOMEM; - mem_allocated += size; - for (l = 0; l < rxd_count[nic->rxd_mode]; l++) { - rx_blocks->rxds[l].virt_addr = - rx_blocks->block_virt_addr + - (rxd_size[nic->rxd_mode] * l); - rx_blocks->rxds[l].dma_addr = - rx_blocks->block_dma_addr + - (rxd_size[nic->rxd_mode] * l); - } - } - /* Interlinking all Rx Blocks */ - for (j = 0; j < blk_cnt; j++) { - int next = (j + 1) % blk_cnt; - tmp_v_addr = ring->rx_blocks[j].block_virt_addr; - tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr; - tmp_p_addr = ring->rx_blocks[j].block_dma_addr; - tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr; - - pre_rxd_blk = tmp_v_addr; - pre_rxd_blk->reserved_2_pNext_RxD_block = - (unsigned long)tmp_v_addr_next; - pre_rxd_blk->pNext_RxD_Blk_physical = - (u64)tmp_p_addr_next; - } - } - if (nic->rxd_mode == RXD_MODE_3B) { - /* - * Allocation of Storages for buffer addresses in 2BUFF mode - * and the buffers as well. - */ - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - blk_cnt = rx_cfg->num_rxd / - (rxd_count[nic->rxd_mode] + 1); - size = sizeof(struct buffAdd *) * blk_cnt; - ring->ba = kmalloc(size, GFP_KERNEL); - if (!ring->ba) - return -ENOMEM; - mem_allocated += size; - for (j = 0; j < blk_cnt; j++) { - int k = 0; - - size = sizeof(struct buffAdd) * - (rxd_count[nic->rxd_mode] + 1); - ring->ba[j] = kmalloc(size, GFP_KERNEL); - if (!ring->ba[j]) - return -ENOMEM; - mem_allocated += size; - while (k != rxd_count[nic->rxd_mode]) { - ba = &ring->ba[j][k]; - size = BUF0_LEN + ALIGN_SIZE; - ba->ba_0_org = kmalloc(size, GFP_KERNEL); - if (!ba->ba_0_org) - return -ENOMEM; - mem_allocated += size; - tmp = (unsigned long)ba->ba_0_org; - tmp += ALIGN_SIZE; - tmp &= ~((unsigned long)ALIGN_SIZE); - ba->ba_0 = (void *)tmp; - - size = BUF1_LEN + ALIGN_SIZE; - ba->ba_1_org = kmalloc(size, GFP_KERNEL); - if (!ba->ba_1_org) - return -ENOMEM; - mem_allocated += size; - tmp = (unsigned long)ba->ba_1_org; - tmp += ALIGN_SIZE; - tmp &= ~((unsigned long)ALIGN_SIZE); - ba->ba_1 = (void *)tmp; - k++; - } - } - } - } - - /* Allocation and initialization of Statistics block */ - size = sizeof(struct stat_block); - mac_control->stats_mem = - pci_alloc_consistent(nic->pdev, size, - &mac_control->stats_mem_phy); - - if (!mac_control->stats_mem) { - /* - * In case of failure, free_shared_mem() is called, which - * should free any memory that was alloced till the - * failure happened. - */ - return -ENOMEM; - } - mem_allocated += size; - mac_control->stats_mem_sz = size; - - tmp_v_addr = mac_control->stats_mem; - mac_control->stats_info = tmp_v_addr; - memset(tmp_v_addr, 0, size); - DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", - dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr); - mac_control->stats_info->sw_stat.mem_allocated += mem_allocated; - return SUCCESS; -} - -/** - * free_shared_mem - Free the allocated Memory - * @nic: Device private variable. - * Description: This function is to free all memory locations allocated by - * the init_shared_mem() function and return it to the kernel. - */ - -static void free_shared_mem(struct s2io_nic *nic) -{ - int i, j, blk_cnt, size; - void *tmp_v_addr; - dma_addr_t tmp_p_addr; - int lst_size, lst_per_page; - struct net_device *dev; - int page_num = 0; - struct config_param *config; - struct mac_info *mac_control; - struct stat_block *stats; - struct swStat *swstats; - - if (!nic) - return; - - dev = nic->dev; - - config = &nic->config; - mac_control = &nic->mac_control; - stats = mac_control->stats_info; - swstats = &stats->sw_stat; - - lst_size = sizeof(struct TxD) * config->max_txds; - lst_per_page = PAGE_SIZE / lst_size; - - for (i = 0; i < config->tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page); - for (j = 0; j < page_num; j++) { - int mem_blks = (j * lst_per_page); - struct list_info_hold *fli; - - if (!fifo->list_info) - return; - - fli = &fifo->list_info[mem_blks]; - if (!fli->list_virt_addr) - break; - pci_free_consistent(nic->pdev, PAGE_SIZE, - fli->list_virt_addr, - fli->list_phy_addr); - swstats->mem_freed += PAGE_SIZE; - } - /* If we got a zero DMA address during allocation, - * free the page now - */ - if (mac_control->zerodma_virt_addr) { - pci_free_consistent(nic->pdev, PAGE_SIZE, - mac_control->zerodma_virt_addr, - (dma_addr_t)0); - DBG_PRINT(INIT_DBG, - "%s: Freeing TxDL with zero DMA address. " - "Virtual address %p\n", - dev->name, mac_control->zerodma_virt_addr); - swstats->mem_freed += PAGE_SIZE; - } - kfree(fifo->list_info); - swstats->mem_freed += tx_cfg->fifo_len * - sizeof(struct list_info_hold); - } - - size = SIZE_OF_BLOCK; - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - blk_cnt = ring->block_count; - for (j = 0; j < blk_cnt; j++) { - tmp_v_addr = ring->rx_blocks[j].block_virt_addr; - tmp_p_addr = ring->rx_blocks[j].block_dma_addr; - if (tmp_v_addr == NULL) - break; - pci_free_consistent(nic->pdev, size, - tmp_v_addr, tmp_p_addr); - swstats->mem_freed += size; - kfree(ring->rx_blocks[j].rxds); - swstats->mem_freed += sizeof(struct rxd_info) * - rxd_count[nic->rxd_mode]; - } - } - - if (nic->rxd_mode == RXD_MODE_3B) { - /* Freeing buffer storage addresses in 2BUFF mode. */ - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - blk_cnt = rx_cfg->num_rxd / - (rxd_count[nic->rxd_mode] + 1); - for (j = 0; j < blk_cnt; j++) { - int k = 0; - if (!ring->ba[j]) - continue; - while (k != rxd_count[nic->rxd_mode]) { - struct buffAdd *ba = &ring->ba[j][k]; - kfree(ba->ba_0_org); - swstats->mem_freed += - BUF0_LEN + ALIGN_SIZE; - kfree(ba->ba_1_org); - swstats->mem_freed += - BUF1_LEN + ALIGN_SIZE; - k++; - } - kfree(ring->ba[j]); - swstats->mem_freed += sizeof(struct buffAdd) * - (rxd_count[nic->rxd_mode] + 1); - } - kfree(ring->ba); - swstats->mem_freed += sizeof(struct buffAdd *) * - blk_cnt; - } - } - - for (i = 0; i < nic->config.tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - if (fifo->ufo_in_band_v) { - swstats->mem_freed += tx_cfg->fifo_len * - sizeof(u64); - kfree(fifo->ufo_in_band_v); - } - } - - if (mac_control->stats_mem) { - swstats->mem_freed += mac_control->stats_mem_sz; - pci_free_consistent(nic->pdev, - mac_control->stats_mem_sz, - mac_control->stats_mem, - mac_control->stats_mem_phy); - } -} - -/** - * s2io_verify_pci_mode - - */ - -static int s2io_verify_pci_mode(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64 = 0; - int mode; - - val64 = readq(&bar0->pci_mode); - mode = (u8)GET_PCI_MODE(val64); - - if (val64 & PCI_MODE_UNKNOWN_MODE) - return -1; /* Unknown PCI mode */ - return mode; -} - -#define NEC_VENID 0x1033 -#define NEC_DEVID 0x0125 -static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev) -{ - struct pci_dev *tdev = NULL; - while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) { - if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) { - if (tdev->bus == s2io_pdev->bus->parent) { - pci_dev_put(tdev); - return 1; - } - } - } - return 0; -} - -static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266}; -/** - * s2io_print_pci_mode - - */ -static int s2io_print_pci_mode(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64 = 0; - int mode; - struct config_param *config = &nic->config; - const char *pcimode; - - val64 = readq(&bar0->pci_mode); - mode = (u8)GET_PCI_MODE(val64); - - if (val64 & PCI_MODE_UNKNOWN_MODE) - return -1; /* Unknown PCI mode */ - - config->bus_speed = bus_speed[mode]; - - if (s2io_on_nec_bridge(nic->pdev)) { - DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n", - nic->dev->name); - return mode; - } - - switch (mode) { - case PCI_MODE_PCI_33: - pcimode = "33MHz PCI bus"; - break; - case PCI_MODE_PCI_66: - pcimode = "66MHz PCI bus"; - break; - case PCI_MODE_PCIX_M1_66: - pcimode = "66MHz PCIX(M1) bus"; - break; - case PCI_MODE_PCIX_M1_100: - pcimode = "100MHz PCIX(M1) bus"; - break; - case PCI_MODE_PCIX_M1_133: - pcimode = "133MHz PCIX(M1) bus"; - break; - case PCI_MODE_PCIX_M2_66: - pcimode = "133MHz PCIX(M2) bus"; - break; - case PCI_MODE_PCIX_M2_100: - pcimode = "200MHz PCIX(M2) bus"; - break; - case PCI_MODE_PCIX_M2_133: - pcimode = "266MHz PCIX(M2) bus"; - break; - default: - pcimode = "unsupported bus!"; - mode = -1; - } - - DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n", - nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode); - - return mode; -} - -/** - * init_tti - Initialization transmit traffic interrupt scheme - * @nic: device private variable - * @link: link status (UP/DOWN) used to enable/disable continuous - * transmit interrupts - * Description: The function configures transmit traffic interrupts - * Return Value: SUCCESS on success and - * '-1' on failure - */ - -static int init_tti(struct s2io_nic *nic, int link) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64 = 0; - int i; - struct config_param *config = &nic->config; - - for (i = 0; i < config->tx_fifo_num; i++) { - /* - * TTI Initialization. Default Tx timer gets us about - * 250 interrupts per sec. Continuous interrupts are enabled - * by default. - */ - if (nic->device_type == XFRAME_II_DEVICE) { - int count = (nic->config.bus_speed * 125)/2; - val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count); - } else - val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078); - - val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) | - TTI_DATA1_MEM_TX_URNG_B(0x10) | - TTI_DATA1_MEM_TX_URNG_C(0x30) | - TTI_DATA1_MEM_TX_TIMER_AC_EN; - if (i == 0) - if (use_continuous_tx_intrs && (link == LINK_UP)) - val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; - writeq(val64, &bar0->tti_data1_mem); - - if (nic->config.intr_type == MSI_X) { - val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | - TTI_DATA2_MEM_TX_UFC_B(0x100) | - TTI_DATA2_MEM_TX_UFC_C(0x200) | - TTI_DATA2_MEM_TX_UFC_D(0x300); - } else { - if ((nic->config.tx_steering_type == - TX_DEFAULT_STEERING) && - (config->tx_fifo_num > 1) && - (i >= nic->udp_fifo_idx) && - (i < (nic->udp_fifo_idx + - nic->total_udp_fifos))) - val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) | - TTI_DATA2_MEM_TX_UFC_B(0x80) | - TTI_DATA2_MEM_TX_UFC_C(0x100) | - TTI_DATA2_MEM_TX_UFC_D(0x120); - else - val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | - TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | - TTI_DATA2_MEM_TX_UFC_D(0x80); - } - - writeq(val64, &bar0->tti_data2_mem); - - val64 = TTI_CMD_MEM_WE | - TTI_CMD_MEM_STROBE_NEW_CMD | - TTI_CMD_MEM_OFFSET(i); - writeq(val64, &bar0->tti_command_mem); - - if (wait_for_cmd_complete(&bar0->tti_command_mem, - TTI_CMD_MEM_STROBE_NEW_CMD, - S2IO_BIT_RESET) != SUCCESS) - return FAILURE; - } - - return SUCCESS; -} - -/** - * init_nic - Initialization of hardware - * @nic: device private variable - * Description: The function sequentially configures every block - * of the H/W from their reset values. - * Return Value: SUCCESS on success and - * '-1' on failure (endian settings incorrect). - */ - -static int init_nic(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - struct net_device *dev = nic->dev; - register u64 val64 = 0; - void __iomem *add; - u32 time; - int i, j; - int dtx_cnt = 0; - unsigned long long mem_share; - int mem_size; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - - /* to set the swapper controle on the card */ - if (s2io_set_swapper(nic)) { - DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n"); - return -EIO; - } - - /* - * Herc requires EOI to be removed from reset before XGXS, so.. - */ - if (nic->device_type & XFRAME_II_DEVICE) { - val64 = 0xA500000000ULL; - writeq(val64, &bar0->sw_reset); - msleep(500); - val64 = readq(&bar0->sw_reset); - } - - /* Remove XGXS from reset state */ - val64 = 0; - writeq(val64, &bar0->sw_reset); - msleep(500); - val64 = readq(&bar0->sw_reset); - - /* Ensure that it's safe to access registers by checking - * RIC_RUNNING bit is reset. Check is valid only for XframeII. - */ - if (nic->device_type == XFRAME_II_DEVICE) { - for (i = 0; i < 50; i++) { - val64 = readq(&bar0->adapter_status); - if (!(val64 & ADAPTER_STATUS_RIC_RUNNING)) - break; - msleep(10); - } - if (i == 50) - return -ENODEV; - } - - /* Enable Receiving broadcasts */ - add = &bar0->mac_cfg; - val64 = readq(&bar0->mac_cfg); - val64 |= MAC_RMAC_BCAST_ENABLE; - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32)val64, add); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64 >> 32), (add + 4)); - - /* Read registers in all blocks */ - val64 = readq(&bar0->mac_int_mask); - val64 = readq(&bar0->mc_int_mask); - val64 = readq(&bar0->xgxs_int_mask); - - /* Set MTU */ - val64 = dev->mtu; - writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - - if (nic->device_type & XFRAME_II_DEVICE) { - while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) { - SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt], - &bar0->dtx_control, UF); - if (dtx_cnt & 0x1) - msleep(1); /* Necessary!! */ - dtx_cnt++; - } - } else { - while (xena_dtx_cfg[dtx_cnt] != END_SIGN) { - SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], - &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - dtx_cnt++; - } - } - - /* Tx DMA Initialization */ - val64 = 0; - writeq(val64, &bar0->tx_fifo_partition_0); - writeq(val64, &bar0->tx_fifo_partition_1); - writeq(val64, &bar0->tx_fifo_partition_2); - writeq(val64, &bar0->tx_fifo_partition_3); - - for (i = 0, j = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) | - vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3); - - if (i == (config->tx_fifo_num - 1)) { - if (i % 2 == 0) - i++; - } - - switch (i) { - case 1: - writeq(val64, &bar0->tx_fifo_partition_0); - val64 = 0; - j = 0; - break; - case 3: - writeq(val64, &bar0->tx_fifo_partition_1); - val64 = 0; - j = 0; - break; - case 5: - writeq(val64, &bar0->tx_fifo_partition_2); - val64 = 0; - j = 0; - break; - case 7: - writeq(val64, &bar0->tx_fifo_partition_3); - val64 = 0; - j = 0; - break; - default: - j++; - break; - } - } - - /* - * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug - * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. - */ - if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4)) - writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); - - val64 = readq(&bar0->tx_fifo_partition_0); - DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", - &bar0->tx_fifo_partition_0, (unsigned long long)val64); - - /* - * Initialization of Tx_PA_CONFIG register to ignore packet - * integrity checking. - */ - val64 = readq(&bar0->tx_pa_cfg); - val64 |= TX_PA_CFG_IGNORE_FRM_ERR | - TX_PA_CFG_IGNORE_SNAP_OUI | - TX_PA_CFG_IGNORE_LLC_CTRL | - TX_PA_CFG_IGNORE_L2_ERR; - writeq(val64, &bar0->tx_pa_cfg); - - /* Rx DMA intialization. */ - val64 = 0; - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - - val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3); - } - writeq(val64, &bar0->rx_queue_priority); - - /* - * Allocating equal share of memory to all the - * configured Rings. - */ - val64 = 0; - if (nic->device_type & XFRAME_II_DEVICE) - mem_size = 32; - else - mem_size = 64; - - for (i = 0; i < config->rx_ring_num; i++) { - switch (i) { - case 0: - mem_share = (mem_size / config->rx_ring_num + - mem_size % config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share); - continue; - case 1: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share); - continue; - case 2: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share); - continue; - case 3: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share); - continue; - case 4: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share); - continue; - case 5: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share); - continue; - case 6: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share); - continue; - case 7: - mem_share = (mem_size / config->rx_ring_num); - val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share); - continue; - } - } - writeq(val64, &bar0->rx_queue_cfg); - - /* - * Filling Tx round robin registers - * as per the number of FIFOs for equal scheduling priority - */ - switch (config->tx_fifo_num) { - case 1: - val64 = 0x0; - writeq(val64, &bar0->tx_w_round_robin_0); - writeq(val64, &bar0->tx_w_round_robin_1); - writeq(val64, &bar0->tx_w_round_robin_2); - writeq(val64, &bar0->tx_w_round_robin_3); - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 2: - val64 = 0x0001000100010001ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - writeq(val64, &bar0->tx_w_round_robin_1); - writeq(val64, &bar0->tx_w_round_robin_2); - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0001000100000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 3: - val64 = 0x0001020001020001ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - val64 = 0x0200010200010200ULL; - writeq(val64, &bar0->tx_w_round_robin_1); - val64 = 0x0102000102000102ULL; - writeq(val64, &bar0->tx_w_round_robin_2); - val64 = 0x0001020001020001ULL; - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0200010200000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 4: - val64 = 0x0001020300010203ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - writeq(val64, &bar0->tx_w_round_robin_1); - writeq(val64, &bar0->tx_w_round_robin_2); - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0001020300000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 5: - val64 = 0x0001020304000102ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - val64 = 0x0304000102030400ULL; - writeq(val64, &bar0->tx_w_round_robin_1); - val64 = 0x0102030400010203ULL; - writeq(val64, &bar0->tx_w_round_robin_2); - val64 = 0x0400010203040001ULL; - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0203040000000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 6: - val64 = 0x0001020304050001ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - val64 = 0x0203040500010203ULL; - writeq(val64, &bar0->tx_w_round_robin_1); - val64 = 0x0405000102030405ULL; - writeq(val64, &bar0->tx_w_round_robin_2); - val64 = 0x0001020304050001ULL; - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0203040500000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 7: - val64 = 0x0001020304050600ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - val64 = 0x0102030405060001ULL; - writeq(val64, &bar0->tx_w_round_robin_1); - val64 = 0x0203040506000102ULL; - writeq(val64, &bar0->tx_w_round_robin_2); - val64 = 0x0304050600010203ULL; - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0405060000000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - case 8: - val64 = 0x0001020304050607ULL; - writeq(val64, &bar0->tx_w_round_robin_0); - writeq(val64, &bar0->tx_w_round_robin_1); - writeq(val64, &bar0->tx_w_round_robin_2); - writeq(val64, &bar0->tx_w_round_robin_3); - val64 = 0x0001020300000000ULL; - writeq(val64, &bar0->tx_w_round_robin_4); - break; - } - - /* Enable all configured Tx FIFO partitions */ - val64 = readq(&bar0->tx_fifo_partition_0); - val64 |= (TX_FIFO_PARTITION_EN); - writeq(val64, &bar0->tx_fifo_partition_0); - - /* Filling the Rx round robin registers as per the - * number of Rings and steering based on QoS with - * equal priority. - */ - switch (config->rx_ring_num) { - case 1: - val64 = 0x0; - writeq(val64, &bar0->rx_w_round_robin_0); - writeq(val64, &bar0->rx_w_round_robin_1); - writeq(val64, &bar0->rx_w_round_robin_2); - writeq(val64, &bar0->rx_w_round_robin_3); - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080808080808080ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 2: - val64 = 0x0001000100010001ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - writeq(val64, &bar0->rx_w_round_robin_1); - writeq(val64, &bar0->rx_w_round_robin_2); - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0001000100000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080808040404040ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 3: - val64 = 0x0001020001020001ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - val64 = 0x0200010200010200ULL; - writeq(val64, &bar0->rx_w_round_robin_1); - val64 = 0x0102000102000102ULL; - writeq(val64, &bar0->rx_w_round_robin_2); - val64 = 0x0001020001020001ULL; - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0200010200000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080804040402020ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 4: - val64 = 0x0001020300010203ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - writeq(val64, &bar0->rx_w_round_robin_1); - writeq(val64, &bar0->rx_w_round_robin_2); - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0001020300000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080404020201010ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 5: - val64 = 0x0001020304000102ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - val64 = 0x0304000102030400ULL; - writeq(val64, &bar0->rx_w_round_robin_1); - val64 = 0x0102030400010203ULL; - writeq(val64, &bar0->rx_w_round_robin_2); - val64 = 0x0400010203040001ULL; - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0203040000000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080404020201008ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 6: - val64 = 0x0001020304050001ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - val64 = 0x0203040500010203ULL; - writeq(val64, &bar0->rx_w_round_robin_1); - val64 = 0x0405000102030405ULL; - writeq(val64, &bar0->rx_w_round_robin_2); - val64 = 0x0001020304050001ULL; - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0203040500000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080404020100804ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 7: - val64 = 0x0001020304050600ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - val64 = 0x0102030405060001ULL; - writeq(val64, &bar0->rx_w_round_robin_1); - val64 = 0x0203040506000102ULL; - writeq(val64, &bar0->rx_w_round_robin_2); - val64 = 0x0304050600010203ULL; - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0405060000000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8080402010080402ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - case 8: - val64 = 0x0001020304050607ULL; - writeq(val64, &bar0->rx_w_round_robin_0); - writeq(val64, &bar0->rx_w_round_robin_1); - writeq(val64, &bar0->rx_w_round_robin_2); - writeq(val64, &bar0->rx_w_round_robin_3); - val64 = 0x0001020300000000ULL; - writeq(val64, &bar0->rx_w_round_robin_4); - - val64 = 0x8040201008040201ULL; - writeq(val64, &bar0->rts_qos_steering); - break; - } - - /* UDP Fix */ - val64 = 0; - for (i = 0; i < 8; i++) - writeq(val64, &bar0->rts_frm_len_n[i]); - - /* Set the default rts frame length for the rings configured */ - val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22); - for (i = 0 ; i < config->rx_ring_num ; i++) - writeq(val64, &bar0->rts_frm_len_n[i]); - - /* Set the frame length for the configured rings - * desired by the user - */ - for (i = 0; i < config->rx_ring_num; i++) { - /* If rts_frm_len[i] == 0 then it is assumed that user not - * specified frame length steering. - * If the user provides the frame length then program - * the rts_frm_len register for those values or else - * leave it as it is. - */ - if (rts_frm_len[i] != 0) { - writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]), - &bar0->rts_frm_len_n[i]); - } - } - - /* Disable differentiated services steering logic */ - for (i = 0; i < 64; i++) { - if (rts_ds_steer(nic, i, 0) == FAILURE) { - DBG_PRINT(ERR_DBG, - "%s: rts_ds_steer failed on codepoint %d\n", - dev->name, i); - return -ENODEV; - } - } - - /* Program statistics memory */ - writeq(mac_control->stats_mem_phy, &bar0->stat_addr); - - if (nic->device_type == XFRAME_II_DEVICE) { - val64 = STAT_BC(0x320); - writeq(val64, &bar0->stat_byte_cnt); - } - - /* - * Initializing the sampling rate for the device to calculate the - * bandwidth utilization. - */ - val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) | - MAC_RX_LINK_UTIL_VAL(rmac_util_period); - writeq(val64, &bar0->mac_link_util); - - /* - * Initializing the Transmit and Receive Traffic Interrupt - * Scheme. - */ - - /* Initialize TTI */ - if (SUCCESS != init_tti(nic, nic->last_link_state)) - return -ENODEV; - - /* RTI Initialization */ - if (nic->device_type == XFRAME_II_DEVICE) { - /* - * Programmed to generate Apprx 500 Intrs per - * second - */ - int count = (nic->config.bus_speed * 125)/4; - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); - } else - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); - val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | - RTI_DATA1_MEM_RX_URNG_B(0x10) | - RTI_DATA1_MEM_RX_URNG_C(0x30) | - RTI_DATA1_MEM_RX_TIMER_AC_EN; - - writeq(val64, &bar0->rti_data1_mem); - - val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) ; - if (nic->config.intr_type == MSI_X) - val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | - RTI_DATA2_MEM_RX_UFC_D(0x40)); - else - val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | - RTI_DATA2_MEM_RX_UFC_D(0x80)); - writeq(val64, &bar0->rti_data2_mem); - - for (i = 0; i < config->rx_ring_num; i++) { - val64 = RTI_CMD_MEM_WE | - RTI_CMD_MEM_STROBE_NEW_CMD | - RTI_CMD_MEM_OFFSET(i); - writeq(val64, &bar0->rti_command_mem); - - /* - * Once the operation completes, the Strobe bit of the - * command register will be reset. We poll for this - * particular condition. We wait for a maximum of 500ms - * for the operation to complete, if it's not complete - * by then we return error. - */ - time = 0; - while (true) { - val64 = readq(&bar0->rti_command_mem); - if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) - break; - - if (time > 10) { - DBG_PRINT(ERR_DBG, "%s: RTI init failed\n", - dev->name); - return -ENODEV; - } - time++; - msleep(50); - } - } - - /* - * Initializing proper values as Pause threshold into all - * the 8 Queues on Rx side. - */ - writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3); - writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7); - - /* Disable RMAC PAD STRIPPING */ - add = &bar0->mac_cfg; - val64 = readq(&bar0->mac_cfg); - val64 &= ~(MAC_CFG_RMAC_STRIP_PAD); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64), add); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64 >> 32), (add + 4)); - val64 = readq(&bar0->mac_cfg); - - /* Enable FCS stripping by adapter */ - add = &bar0->mac_cfg; - val64 = readq(&bar0->mac_cfg); - val64 |= MAC_CFG_RMAC_STRIP_FCS; - if (nic->device_type == XFRAME_II_DEVICE) - writeq(val64, &bar0->mac_cfg); - else { - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64), add); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64 >> 32), (add + 4)); - } - - /* - * Set the time value to be inserted in the pause frame - * generated by xena. - */ - val64 = readq(&bar0->rmac_pause_cfg); - val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff)); - val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time); - writeq(val64, &bar0->rmac_pause_cfg); - - /* - * Set the Threshold Limit for Generating the pause frame - * If the amount of data in any Queue exceeds ratio of - * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256 - * pause frame is generated - */ - val64 = 0; - for (i = 0; i < 4; i++) { - val64 |= (((u64)0xFF00 | - nic->mac_control.mc_pause_threshold_q0q3) - << (i * 2 * 8)); - } - writeq(val64, &bar0->mc_pause_thresh_q0q3); - - val64 = 0; - for (i = 0; i < 4; i++) { - val64 |= (((u64)0xFF00 | - nic->mac_control.mc_pause_threshold_q4q7) - << (i * 2 * 8)); - } - writeq(val64, &bar0->mc_pause_thresh_q4q7); - - /* - * TxDMA will stop Read request if the number of read split has - * exceeded the limit pointed by shared_splits - */ - val64 = readq(&bar0->pic_control); - val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits); - writeq(val64, &bar0->pic_control); - - if (nic->config.bus_speed == 266) { - writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout); - writeq(0x0, &bar0->read_retry_delay); - writeq(0x0, &bar0->write_retry_delay); - } - - /* - * Programming the Herc to split every write transaction - * that does not start on an ADB to reduce disconnects. - */ - if (nic->device_type == XFRAME_II_DEVICE) { - val64 = FAULT_BEHAVIOUR | EXT_REQ_EN | - MISC_LINK_STABILITY_PRD(3); - writeq(val64, &bar0->misc_control); - val64 = readq(&bar0->pic_control2); - val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15)); - writeq(val64, &bar0->pic_control2); - } - if (strstr(nic->product_name, "CX4")) { - val64 = TMAC_AVG_IPG(0x17); - writeq(val64, &bar0->tmac_avg_ipg); - } - - return SUCCESS; -} -#define LINK_UP_DOWN_INTERRUPT 1 -#define MAC_RMAC_ERR_TIMER 2 - -static int s2io_link_fault_indication(struct s2io_nic *nic) -{ - if (nic->device_type == XFRAME_II_DEVICE) - return LINK_UP_DOWN_INTERRUPT; - else - return MAC_RMAC_ERR_TIMER; -} - -/** - * do_s2io_write_bits - update alarm bits in alarm register - * @value: alarm bits - * @flag: interrupt status - * @addr: address value - * Description: update alarm bits in alarm register - * Return Value: - * NONE. - */ -static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr) -{ - u64 temp64; - - temp64 = readq(addr); - - if (flag == ENABLE_INTRS) - temp64 &= ~((u64)value); - else - temp64 |= ((u64)value); - writeq(temp64, addr); -} - -static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 gen_int_mask = 0; - u64 interruptible; - - writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask); - if (mask & TX_DMA_INTR) { - gen_int_mask |= TXDMA_INT_M; - - do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT | - TXDMA_PCC_INT | TXDMA_TTI_INT | - TXDMA_LSO_INT | TXDMA_TPA_INT | - TXDMA_SM_INT, flag, &bar0->txdma_int_mask); - - do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM | - PFC_MISC_0_ERR | PFC_MISC_1_ERR | - PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag, - &bar0->pfc_err_mask); - - do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM | - TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR | - TDA_PCIX_ERR, flag, &bar0->tda_err_mask); - - do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR | - PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM | - PCC_N_SERR | PCC_6_COF_OV_ERR | - PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR | - PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR | - PCC_TXB_ECC_SG_ERR, - flag, &bar0->pcc_err_mask); - - do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR | - TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask); - - do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT | - LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM | - LSO6_SEND_OFLOW | LSO7_SEND_OFLOW, - flag, &bar0->lso_err_mask); - - do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP, - flag, &bar0->tpa_err_mask); - - do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask); - } - - if (mask & TX_MAC_INTR) { - gen_int_mask |= TXMAC_INT_M; - do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag, - &bar0->mac_int_mask); - do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR | - TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR | - TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR, - flag, &bar0->mac_tmac_err_mask); - } - - if (mask & TX_XGXS_INTR) { - gen_int_mask |= TXXGXS_INT_M; - do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag, - &bar0->xgxs_int_mask); - do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR | - TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR, - flag, &bar0->xgxs_txgxs_err_mask); - } - - if (mask & RX_DMA_INTR) { - gen_int_mask |= RXDMA_INT_M; - do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M | - RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M, - flag, &bar0->rxdma_int_mask); - do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR | - RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM | - RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR | - RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask); - do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn | - PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn | - PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag, - &bar0->prc_pcix_err_mask); - do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR | - RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag, - &bar0->rpa_err_mask); - do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR | - RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM | - RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR | - RDA_FRM_ECC_SG_ERR | - RDA_MISC_ERR|RDA_PCIX_ERR, - flag, &bar0->rda_err_mask); - do_s2io_write_bits(RTI_SM_ERR_ALARM | - RTI_ECC_SG_ERR | RTI_ECC_DB_ERR, - flag, &bar0->rti_err_mask); - } - - if (mask & RX_MAC_INTR) { - gen_int_mask |= RXMAC_INT_M; - do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag, - &bar0->mac_int_mask); - interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR | - RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR | - RMAC_DOUBLE_ECC_ERR); - if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) - interruptible |= RMAC_LINK_STATE_CHANGE_INT; - do_s2io_write_bits(interruptible, - flag, &bar0->mac_rmac_err_mask); - } - - if (mask & RX_XGXS_INTR) { - gen_int_mask |= RXXGXS_INT_M; - do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag, - &bar0->xgxs_int_mask); - do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag, - &bar0->xgxs_rxgxs_err_mask); - } - - if (mask & MC_INTR) { - gen_int_mask |= MC_INT_M; - do_s2io_write_bits(MC_INT_MASK_MC_INT, - flag, &bar0->mc_int_mask); - do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG | - MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag, - &bar0->mc_err_mask); - } - nic->general_int_mask = gen_int_mask; - - /* Remove this line when alarm interrupts are enabled */ - nic->general_int_mask = 0; -} - -/** - * en_dis_able_nic_intrs - Enable or Disable the interrupts - * @nic: device private variable, - * @mask: A mask indicating which Intr block must be modified and, - * @flag: A flag indicating whether to enable or disable the Intrs. - * Description: This function will either disable or enable the interrupts - * depending on the flag argument. The mask argument can be used to - * enable/disable any Intr block. - * Return Value: NONE. - */ - -static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 temp64 = 0, intr_mask = 0; - - intr_mask = nic->general_int_mask; - - /* Top level interrupt classification */ - /* PIC Interrupts */ - if (mask & TX_PIC_INTR) { - /* Enable PIC Intrs in the general intr mask register */ - intr_mask |= TXPIC_INT_M; - if (flag == ENABLE_INTRS) { - /* - * If Hercules adapter enable GPIO otherwise - * disable all PCIX, Flash, MDIO, IIC and GPIO - * interrupts for now. - * TODO - */ - if (s2io_link_fault_indication(nic) == - LINK_UP_DOWN_INTERRUPT) { - do_s2io_write_bits(PIC_INT_GPIO, flag, - &bar0->pic_int_mask); - do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag, - &bar0->gpio_int_mask); - } else - writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); - } else if (flag == DISABLE_INTRS) { - /* - * Disable PIC Intrs in the general - * intr mask register - */ - writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); - } - } - - /* Tx traffic interrupts */ - if (mask & TX_TRAFFIC_INTR) { - intr_mask |= TXTRAFFIC_INT_M; - if (flag == ENABLE_INTRS) { - /* - * Enable all the Tx side interrupts - * writing 0 Enables all 64 TX interrupt levels - */ - writeq(0x0, &bar0->tx_traffic_mask); - } else if (flag == DISABLE_INTRS) { - /* - * Disable Tx Traffic Intrs in the general intr mask - * register. - */ - writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask); - } - } - - /* Rx traffic interrupts */ - if (mask & RX_TRAFFIC_INTR) { - intr_mask |= RXTRAFFIC_INT_M; - if (flag == ENABLE_INTRS) { - /* writing 0 Enables all 8 RX interrupt levels */ - writeq(0x0, &bar0->rx_traffic_mask); - } else if (flag == DISABLE_INTRS) { - /* - * Disable Rx Traffic Intrs in the general intr mask - * register. - */ - writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask); - } - } - - temp64 = readq(&bar0->general_int_mask); - if (flag == ENABLE_INTRS) - temp64 &= ~((u64)intr_mask); - else - temp64 = DISABLE_ALL_INTRS; - writeq(temp64, &bar0->general_int_mask); - - nic->general_int_mask = readq(&bar0->general_int_mask); -} - -/** - * verify_pcc_quiescent- Checks for PCC quiescent state - * Return: 1 If PCC is quiescence - * 0 If PCC is not quiescence - */ -static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) -{ - int ret = 0, herc; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64 = readq(&bar0->adapter_status); - - herc = (sp->device_type == XFRAME_II_DEVICE); - - if (flag == false) { - if ((!herc && (sp->pdev->revision >= 4)) || herc) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) - ret = 1; - } else { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) - ret = 1; - } - } else { - if ((!herc && (sp->pdev->revision >= 4)) || herc) { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE)) - ret = 1; - } else { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == - ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) - ret = 1; - } - } - - return ret; -} -/** - * verify_xena_quiescence - Checks whether the H/W is ready - * Description: Returns whether the H/W is ready to go or not. Depending - * on whether adapter enable bit was written or not the comparison - * differs and the calling function passes the input argument flag to - * indicate this. - * Return: 1 If xena is quiescence - * 0 If Xena is not quiescence - */ - -static int verify_xena_quiescence(struct s2io_nic *sp) -{ - int mode; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64 = readq(&bar0->adapter_status); - mode = s2io_verify_pci_mode(sp); - - if (!(val64 & ADAPTER_STATUS_TDMA_READY)) { - DBG_PRINT(ERR_DBG, "TDMA is not ready!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_RDMA_READY)) { - DBG_PRINT(ERR_DBG, "RDMA is not ready!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_PFC_READY)) { - DBG_PRINT(ERR_DBG, "PFC is not ready!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) { - DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) { - DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) { - DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) { - DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n"); - return 0; - } - if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) { - DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n"); - return 0; - } - - /* - * In PCI 33 mode, the P_PLL is not used, and therefore, - * the the P_PLL_LOCK bit in the adapter_status register will - * not be asserted. - */ - if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) && - sp->device_type == XFRAME_II_DEVICE && - mode != PCI_MODE_PCI_33) { - DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n"); - return 0; - } - if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { - DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n"); - return 0; - } - return 1; -} - -/** - * fix_mac_address - Fix for Mac addr problem on Alpha platforms - * @sp: Pointer to device specifc structure - * Description : - * New procedure to clear mac address reading problems on Alpha platforms - * - */ - -static void fix_mac_address(struct s2io_nic *sp) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - int i = 0; - - while (fix_mac[i] != END_SIGN) { - writeq(fix_mac[i++], &bar0->gpio_control); - udelay(10); - (void) readq(&bar0->gpio_control); - } -} - -/** - * start_nic - Turns the device on - * @nic : device private variable. - * Description: - * This function actually turns the device on. Before this function is - * called,all Registers are configured from their reset states - * and shared memory is allocated but the NIC is still quiescent. On - * calling this function, the device interrupts are cleared and the NIC is - * literally switched on by writing into the adapter control register. - * Return Value: - * SUCCESS on success and -1 on failure. - */ - -static int start_nic(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - struct net_device *dev = nic->dev; - register u64 val64 = 0; - u16 subid, i; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - - /* PRC Initialization and configuration */ - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - writeq((u64)ring->rx_blocks[0].block_dma_addr, - &bar0->prc_rxd0_n[i]); - - val64 = readq(&bar0->prc_ctrl_n[i]); - if (nic->rxd_mode == RXD_MODE_1) - val64 |= PRC_CTRL_RC_ENABLED; - else - val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3; - if (nic->device_type == XFRAME_II_DEVICE) - val64 |= PRC_CTRL_GROUP_READS; - val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF); - val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000); - writeq(val64, &bar0->prc_ctrl_n[i]); - } - - if (nic->rxd_mode == RXD_MODE_3B) { - /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */ - val64 = readq(&bar0->rx_pa_cfg); - val64 |= RX_PA_CFG_IGNORE_L2_ERR; - writeq(val64, &bar0->rx_pa_cfg); - } - - if (vlan_tag_strip == 0) { - val64 = readq(&bar0->rx_pa_cfg); - val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG; - writeq(val64, &bar0->rx_pa_cfg); - nic->vlan_strip_flag = 0; - } - - /* - * Enabling MC-RLDRAM. After enabling the device, we timeout - * for around 100ms, which is approximately the time required - * for the device to be ready for operation. - */ - val64 = readq(&bar0->mc_rldram_mrs); - val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); - val64 = readq(&bar0->mc_rldram_mrs); - - msleep(100); /* Delay by around 100 ms. */ - - /* Enabling ECC Protection. */ - val64 = readq(&bar0->adapter_control); - val64 &= ~ADAPTER_ECC_EN; - writeq(val64, &bar0->adapter_control); - - /* - * Verify if the device is ready to be enabled, if so enable - * it. - */ - val64 = readq(&bar0->adapter_status); - if (!verify_xena_quiescence(nic)) { - DBG_PRINT(ERR_DBG, "%s: device is not ready, " - "Adapter status reads: 0x%llx\n", - dev->name, (unsigned long long)val64); - return FAILURE; - } - - /* - * With some switches, link might be already up at this point. - * Because of this weird behavior, when we enable laser, - * we may not get link. We need to handle this. We cannot - * figure out which switch is misbehaving. So we are forced to - * make a global change. - */ - - /* Enabling Laser. */ - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_EOI_TX_ON; - writeq(val64, &bar0->adapter_control); - - if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { - /* - * Dont see link state interrupts initially on some switches, - * so directly scheduling the link state task here. - */ - schedule_work(&nic->set_link_task); - } - /* SXE-002: Initialize link and activity LED */ - subid = nic->pdev->subsystem_device; - if (((subid & 0xFF) >= 0x07) && - (nic->device_type == XFRAME_I_DEVICE)) { - val64 = readq(&bar0->gpio_control); - val64 |= 0x0000800000000000ULL; - writeq(val64, &bar0->gpio_control); - val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *)bar0 + 0x2700); - } - - return SUCCESS; -} -/** - * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb - */ -static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, - struct TxD *txdlp, int get_off) -{ - struct s2io_nic *nic = fifo_data->nic; - struct sk_buff *skb; - struct TxD *txds; - u16 j, frg_cnt; - - txds = txdlp; - if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) { - pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer, - sizeof(u64), PCI_DMA_TODEVICE); - txds++; - } - - skb = (struct sk_buff *)((unsigned long)txds->Host_Control); - if (!skb) { - memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds)); - return NULL; - } - pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer, - skb_headlen(skb), PCI_DMA_TODEVICE); - frg_cnt = skb_shinfo(skb)->nr_frags; - if (frg_cnt) { - txds++; - for (j = 0; j < frg_cnt; j++, txds++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[j]; - if (!txds->Buffer_Pointer) - break; - pci_unmap_page(nic->pdev, - (dma_addr_t)txds->Buffer_Pointer, - frag->size, PCI_DMA_TODEVICE); - } - } - memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds)); - return skb; -} - -/** - * free_tx_buffers - Free all queued Tx buffers - * @nic : device private variable. - * Description: - * Free all queued Tx buffers. - * Return Value: void - */ - -static void free_tx_buffers(struct s2io_nic *nic) -{ - struct net_device *dev = nic->dev; - struct sk_buff *skb; - struct TxD *txdp; - int i, j; - int cnt = 0; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - struct stat_block *stats = mac_control->stats_info; - struct swStat *swstats = &stats->sw_stat; - - for (i = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - struct fifo_info *fifo = &mac_control->fifos[i]; - unsigned long flags; - - spin_lock_irqsave(&fifo->tx_lock, flags); - for (j = 0; j < tx_cfg->fifo_len; j++) { - txdp = fifo->list_info[j].list_virt_addr; - skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j); - if (skb) { - swstats->mem_freed += skb->truesize; - dev_kfree_skb(skb); - cnt++; - } - } - DBG_PRINT(INTR_DBG, - "%s: forcibly freeing %d skbs on FIFO%d\n", - dev->name, cnt, i); - fifo->tx_curr_get_info.offset = 0; - fifo->tx_curr_put_info.offset = 0; - spin_unlock_irqrestore(&fifo->tx_lock, flags); - } -} - -/** - * stop_nic - To stop the nic - * @nic ; device private variable. - * Description: - * This function does exactly the opposite of what the start_nic() - * function does. This function is called to stop the device. - * Return Value: - * void. - */ - -static void stop_nic(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64 = 0; - u16 interruptible; - - /* Disable all interrupts */ - en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS); - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR; - en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); - - /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */ - val64 = readq(&bar0->adapter_control); - val64 &= ~(ADAPTER_CNTL_EN); - writeq(val64, &bar0->adapter_control); -} - -/** - * fill_rx_buffers - Allocates the Rx side skbs - * @ring_info: per ring structure - * @from_card_up: If this is true, we will map the buffer to get - * the dma address for buf0 and buf1 to give it to the card. - * Else we will sync the already mapped buffer to give it to the card. - * Description: - * The function allocates Rx side skbs and puts the physical - * address of these buffers into the RxD buffer pointers, so that the NIC - * can DMA the received frame into these locations. - * The NIC supports 3 receive modes, viz - * 1. single buffer, - * 2. three buffer and - * 3. Five buffer modes. - * Each mode defines how many fragments the received frame will be split - * up into by the NIC. The frame is split into L3 header, L4 Header, - * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself - * is split into 3 fragments. As of now only single buffer mode is - * supported. - * Return Value: - * SUCCESS on success or an appropriate -ve value on failure. - */ -static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring, - int from_card_up) -{ - struct sk_buff *skb; - struct RxD_t *rxdp; - int off, size, block_no, block_no1; - u32 alloc_tab = 0; - u32 alloc_cnt; - u64 tmp; - struct buffAdd *ba; - struct RxD_t *first_rxdp = NULL; - u64 Buffer0_ptr = 0, Buffer1_ptr = 0; - int rxd_index = 0; - struct RxD1 *rxdp1; - struct RxD3 *rxdp3; - struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat; - - alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left; - - block_no1 = ring->rx_curr_get_info.block_index; - while (alloc_tab < alloc_cnt) { - block_no = ring->rx_curr_put_info.block_index; - - off = ring->rx_curr_put_info.offset; - - rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr; - - rxd_index = off + 1; - if (block_no) - rxd_index += (block_no * ring->rxd_count); - - if ((block_no == block_no1) && - (off == ring->rx_curr_get_info.offset) && - (rxdp->Host_Control)) { - DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n", - ring->dev->name); - goto end; - } - if (off && (off == ring->rxd_count)) { - ring->rx_curr_put_info.block_index++; - if (ring->rx_curr_put_info.block_index == - ring->block_count) - ring->rx_curr_put_info.block_index = 0; - block_no = ring->rx_curr_put_info.block_index; - off = 0; - ring->rx_curr_put_info.offset = off; - rxdp = ring->rx_blocks[block_no].block_virt_addr; - DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", - ring->dev->name, rxdp); - - } - - if ((rxdp->Control_1 & RXD_OWN_XENA) && - ((ring->rxd_mode == RXD_MODE_3B) && - (rxdp->Control_2 & s2BIT(0)))) { - ring->rx_curr_put_info.offset = off; - goto end; - } - /* calculate size of skb based on ring mode */ - size = ring->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + HEADER_SNAP_SIZE; - if (ring->rxd_mode == RXD_MODE_1) - size += NET_IP_ALIGN; - else - size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4; - - /* allocate skb */ - skb = dev_alloc_skb(size); - if (!skb) { - DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n", - ring->dev->name); - if (first_rxdp) { - wmb(); - first_rxdp->Control_1 |= RXD_OWN_XENA; - } - swstats->mem_alloc_fail_cnt++; - - return -ENOMEM ; - } - swstats->mem_allocated += skb->truesize; - - if (ring->rxd_mode == RXD_MODE_1) { - /* 1 buffer mode - normal operation mode */ - rxdp1 = (struct RxD1 *)rxdp; - memset(rxdp, 0, sizeof(struct RxD1)); - skb_reserve(skb, NET_IP_ALIGN); - rxdp1->Buffer0_ptr = - pci_map_single(ring->pdev, skb->data, - size - NET_IP_ALIGN, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(nic->pdev, - rxdp1->Buffer0_ptr)) - goto pci_map_failed; - - rxdp->Control_2 = - SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN); - rxdp->Host_Control = (unsigned long)skb; - } else if (ring->rxd_mode == RXD_MODE_3B) { - /* - * 2 buffer mode - - * 2 buffer mode provides 128 - * byte aligned receive buffers. - */ - - rxdp3 = (struct RxD3 *)rxdp; - /* save buffer pointers to avoid frequent dma mapping */ - Buffer0_ptr = rxdp3->Buffer0_ptr; - Buffer1_ptr = rxdp3->Buffer1_ptr; - memset(rxdp, 0, sizeof(struct RxD3)); - /* restore the buffer pointers for dma sync*/ - rxdp3->Buffer0_ptr = Buffer0_ptr; - rxdp3->Buffer1_ptr = Buffer1_ptr; - - ba = &ring->ba[block_no][off]; - skb_reserve(skb, BUF0_LEN); - tmp = (u64)(unsigned long)skb->data; - tmp += ALIGN_SIZE; - tmp &= ~ALIGN_SIZE; - skb->data = (void *) (unsigned long)tmp; - skb_reset_tail_pointer(skb); - - if (from_card_up) { - rxdp3->Buffer0_ptr = - pci_map_single(ring->pdev, ba->ba_0, - BUF0_LEN, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(nic->pdev, - rxdp3->Buffer0_ptr)) - goto pci_map_failed; - } else - pci_dma_sync_single_for_device(ring->pdev, - (dma_addr_t)rxdp3->Buffer0_ptr, - BUF0_LEN, - PCI_DMA_FROMDEVICE); - - rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); - if (ring->rxd_mode == RXD_MODE_3B) { - /* Two buffer mode */ - - /* - * Buffer2 will have L3/L4 header plus - * L4 payload - */ - rxdp3->Buffer2_ptr = pci_map_single(ring->pdev, - skb->data, - ring->mtu + 4, - PCI_DMA_FROMDEVICE); - - if (pci_dma_mapping_error(nic->pdev, - rxdp3->Buffer2_ptr)) - goto pci_map_failed; - - if (from_card_up) { - rxdp3->Buffer1_ptr = - pci_map_single(ring->pdev, - ba->ba_1, - BUF1_LEN, - PCI_DMA_FROMDEVICE); - - if (pci_dma_mapping_error(nic->pdev, - rxdp3->Buffer1_ptr)) { - pci_unmap_single(ring->pdev, - (dma_addr_t)(unsigned long) - skb->data, - ring->mtu + 4, - PCI_DMA_FROMDEVICE); - goto pci_map_failed; - } - } - rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); - rxdp->Control_2 |= SET_BUFFER2_SIZE_3 - (ring->mtu + 4); - } - rxdp->Control_2 |= s2BIT(0); - rxdp->Host_Control = (unsigned long) (skb); - } - if (alloc_tab & ((1 << rxsync_frequency) - 1)) - rxdp->Control_1 |= RXD_OWN_XENA; - off++; - if (off == (ring->rxd_count + 1)) - off = 0; - ring->rx_curr_put_info.offset = off; - - rxdp->Control_2 |= SET_RXD_MARKER; - if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) { - if (first_rxdp) { - wmb(); - first_rxdp->Control_1 |= RXD_OWN_XENA; - } - first_rxdp = rxdp; - } - ring->rx_bufs_left += 1; - alloc_tab++; - } - -end: - /* Transfer ownership of first descriptor to adapter just before - * exiting. Before that, use memory barrier so that ownership - * and other fields are seen by adapter correctly. - */ - if (first_rxdp) { - wmb(); - first_rxdp->Control_1 |= RXD_OWN_XENA; - } - - return SUCCESS; - -pci_map_failed: - swstats->pci_map_fail_cnt++; - swstats->mem_freed += skb->truesize; - dev_kfree_skb_irq(skb); - return -ENOMEM; -} - -static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk) -{ - struct net_device *dev = sp->dev; - int j; - struct sk_buff *skb; - struct RxD_t *rxdp; - struct RxD1 *rxdp1; - struct RxD3 *rxdp3; - struct mac_info *mac_control = &sp->mac_control; - struct stat_block *stats = mac_control->stats_info; - struct swStat *swstats = &stats->sw_stat; - - for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) { - rxdp = mac_control->rings[ring_no]. - rx_blocks[blk].rxds[j].virt_addr; - skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control); - if (!skb) - continue; - if (sp->rxd_mode == RXD_MODE_1) { - rxdp1 = (struct RxD1 *)rxdp; - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp1->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - memset(rxdp, 0, sizeof(struct RxD1)); - } else if (sp->rxd_mode == RXD_MODE_3B) { - rxdp3 = (struct RxD3 *)rxdp; - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer0_ptr, - BUF0_LEN, - PCI_DMA_FROMDEVICE); - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer1_ptr, - BUF1_LEN, - PCI_DMA_FROMDEVICE); - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer2_ptr, - dev->mtu + 4, - PCI_DMA_FROMDEVICE); - memset(rxdp, 0, sizeof(struct RxD3)); - } - swstats->mem_freed += skb->truesize; - dev_kfree_skb(skb); - mac_control->rings[ring_no].rx_bufs_left -= 1; - } -} - -/** - * free_rx_buffers - Frees all Rx buffers - * @sp: device private variable. - * Description: - * This function will free all Rx buffers allocated by host. - * Return Value: - * NONE. - */ - -static void free_rx_buffers(struct s2io_nic *sp) -{ - struct net_device *dev = sp->dev; - int i, blk = 0, buf_cnt = 0; - struct config_param *config = &sp->config; - struct mac_info *mac_control = &sp->mac_control; - - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - for (blk = 0; blk < rx_ring_sz[i]; blk++) - free_rxd_blk(sp, i, blk); - - ring->rx_curr_put_info.block_index = 0; - ring->rx_curr_get_info.block_index = 0; - ring->rx_curr_put_info.offset = 0; - ring->rx_curr_get_info.offset = 0; - ring->rx_bufs_left = 0; - DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n", - dev->name, buf_cnt, i); - } -} - -static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring) -{ - if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n", - ring->dev->name); - } - return 0; -} - -/** - * s2io_poll - Rx interrupt handler for NAPI support - * @napi : pointer to the napi structure. - * @budget : The number of packets that were budgeted to be processed - * during one pass through the 'Poll" function. - * Description: - * Comes into picture only if NAPI support has been incorporated. It does - * the same thing that rx_intr_handler does, but not in a interrupt context - * also It will process only a given number of packets. - * Return value: - * 0 on success and 1 if there are No Rx packets to be processed. - */ - -static int s2io_poll_msix(struct napi_struct *napi, int budget) -{ - struct ring_info *ring = container_of(napi, struct ring_info, napi); - struct net_device *dev = ring->dev; - int pkts_processed = 0; - u8 __iomem *addr = NULL; - u8 val8 = 0; - struct s2io_nic *nic = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = nic->bar0; - int budget_org = budget; - - if (unlikely(!is_s2io_card_up(nic))) - return 0; - - pkts_processed = rx_intr_handler(ring, budget); - s2io_chk_rx_buffers(nic, ring); - - if (pkts_processed < budget_org) { - napi_complete(napi); - /*Re Enable MSI-Rx Vector*/ - addr = (u8 __iomem *)&bar0->xmsi_mask_reg; - addr += 7 - ring->ring_no; - val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; - writeb(val8, addr); - val8 = readb(addr); - } - return pkts_processed; -} - -static int s2io_poll_inta(struct napi_struct *napi, int budget) -{ - struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); - int pkts_processed = 0; - int ring_pkts_processed, i; - struct XENA_dev_config __iomem *bar0 = nic->bar0; - int budget_org = budget; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - - if (unlikely(!is_s2io_card_up(nic))) - return 0; - - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - ring_pkts_processed = rx_intr_handler(ring, budget); - s2io_chk_rx_buffers(nic, ring); - pkts_processed += ring_pkts_processed; - budget -= ring_pkts_processed; - if (budget <= 0) - break; - } - if (pkts_processed < budget_org) { - napi_complete(napi); - /* Re enable the Rx interrupts for the ring */ - writeq(0, &bar0->rx_traffic_mask); - readl(&bar0->rx_traffic_mask); - } - return pkts_processed; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/** - * s2io_netpoll - netpoll event handler entry point - * @dev : pointer to the device structure. - * Description: - * This function will be called by upper layer to check for events on the - * interface in situations where interrupts are disabled. It is used for - * specific in-kernel networking tasks, such as remote consoles and kernel - * debugging over the network (example netdump in RedHat). - */ -static void s2io_netpoll(struct net_device *dev) -{ - struct s2io_nic *nic = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 val64 = 0xFFFFFFFFFFFFFFFFULL; - int i; - struct config_param *config = &nic->config; - struct mac_info *mac_control = &nic->mac_control; - - if (pci_channel_offline(nic->pdev)) - return; - - disable_irq(dev->irq); - - writeq(val64, &bar0->rx_traffic_int); - writeq(val64, &bar0->tx_traffic_int); - - /* we need to free up the transmitted skbufs or else netpoll will - * run out of skbs and will fail and eventually netpoll application such - * as netdump will fail. - */ - for (i = 0; i < config->tx_fifo_num; i++) - tx_intr_handler(&mac_control->fifos[i]); - - /* check for received packet and indicate up to network */ - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - rx_intr_handler(ring, 0); - } - - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) { - DBG_PRINT(INFO_DBG, - "%s: Out of memory in Rx Netpoll!!\n", - dev->name); - break; - } - } - enable_irq(dev->irq); -} -#endif - -/** - * rx_intr_handler - Rx interrupt handler - * @ring_info: per ring structure. - * @budget: budget for napi processing. - * Description: - * If the interrupt is because of a received frame or if the - * receive ring contains fresh as yet un-processed frames,this function is - * called. It picks out the RxD at which place the last Rx processing had - * stopped and sends the skb to the OSM's Rx handler and then increments - * the offset. - * Return Value: - * No. of napi packets processed. - */ -static int rx_intr_handler(struct ring_info *ring_data, int budget) -{ - int get_block, put_block; - struct rx_curr_get_info get_info, put_info; - struct RxD_t *rxdp; - struct sk_buff *skb; - int pkt_cnt = 0, napi_pkts = 0; - int i; - struct RxD1 *rxdp1; - struct RxD3 *rxdp3; - - get_info = ring_data->rx_curr_get_info; - get_block = get_info.block_index; - memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info)); - put_block = put_info.block_index; - rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr; - - while (RXD_IS_UP2DT(rxdp)) { - /* - * If your are next to put index then it's - * FIFO full condition - */ - if ((get_block == put_block) && - (get_info.offset + 1) == put_info.offset) { - DBG_PRINT(INTR_DBG, "%s: Ring Full\n", - ring_data->dev->name); - break; - } - skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n", - ring_data->dev->name); - return 0; - } - if (ring_data->rxd_mode == RXD_MODE_1) { - rxdp1 = (struct RxD1 *)rxdp; - pci_unmap_single(ring_data->pdev, (dma_addr_t) - rxdp1->Buffer0_ptr, - ring_data->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - } else if (ring_data->rxd_mode == RXD_MODE_3B) { - rxdp3 = (struct RxD3 *)rxdp; - pci_dma_sync_single_for_cpu(ring_data->pdev, - (dma_addr_t)rxdp3->Buffer0_ptr, - BUF0_LEN, - PCI_DMA_FROMDEVICE); - pci_unmap_single(ring_data->pdev, - (dma_addr_t)rxdp3->Buffer2_ptr, - ring_data->mtu + 4, - PCI_DMA_FROMDEVICE); - } - prefetch(skb->data); - rx_osm_handler(ring_data, rxdp); - get_info.offset++; - ring_data->rx_curr_get_info.offset = get_info.offset; - rxdp = ring_data->rx_blocks[get_block]. - rxds[get_info.offset].virt_addr; - if (get_info.offset == rxd_count[ring_data->rxd_mode]) { - get_info.offset = 0; - ring_data->rx_curr_get_info.offset = get_info.offset; - get_block++; - if (get_block == ring_data->block_count) - get_block = 0; - ring_data->rx_curr_get_info.block_index = get_block; - rxdp = ring_data->rx_blocks[get_block].block_virt_addr; - } - - if (ring_data->nic->config.napi) { - budget--; - napi_pkts++; - if (!budget) - break; - } - pkt_cnt++; - if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts)) - break; - } - if (ring_data->lro) { - /* Clear all LRO sessions before exiting */ - for (i = 0; i < MAX_LRO_SESSIONS; i++) { - struct lro *lro = &ring_data->lro0_n[i]; - if (lro->in_use) { - update_L3L4_header(ring_data->nic, lro); - queue_rx_frame(lro->parent, lro->vlan_tag); - clear_lro_session(lro); - } - } - } - return napi_pkts; -} - -/** - * tx_intr_handler - Transmit interrupt handler - * @nic : device private variable - * Description: - * If an interrupt was raised to indicate DMA complete of the - * Tx packet, this function is called. It identifies the last TxD - * whose buffer was freed and frees all skbs whose data have already - * DMA'ed into the NICs internal memory. - * Return Value: - * NONE - */ - -static void tx_intr_handler(struct fifo_info *fifo_data) -{ - struct s2io_nic *nic = fifo_data->nic; - struct tx_curr_get_info get_info, put_info; - struct sk_buff *skb = NULL; - struct TxD *txdlp; - int pkt_cnt = 0; - unsigned long flags = 0; - u8 err_mask; - struct stat_block *stats = nic->mac_control.stats_info; - struct swStat *swstats = &stats->sw_stat; - - if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags)) - return; - - get_info = fifo_data->tx_curr_get_info; - memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info)); - txdlp = fifo_data->list_info[get_info.offset].list_virt_addr; - while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && - (get_info.offset != put_info.offset) && - (txdlp->Host_Control)) { - /* Check for TxD errors */ - if (txdlp->Control_1 & TXD_T_CODE) { - unsigned long long err; - err = txdlp->Control_1 & TXD_T_CODE; - if (err & 0x1) { - swstats->parity_err_cnt++; - } - - /* update t_code statistics */ - err_mask = err >> 48; - switch (err_mask) { - case 2: - swstats->tx_buf_abort_cnt++; - break; - - case 3: - swstats->tx_desc_abort_cnt++; - break; - - case 7: - swstats->tx_parity_err_cnt++; - break; - - case 10: - swstats->tx_link_loss_cnt++; - break; - - case 15: - swstats->tx_list_proc_err_cnt++; - break; - } - } - - skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset); - if (skb == NULL) { - spin_unlock_irqrestore(&fifo_data->tx_lock, flags); - DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n", - __func__); - return; - } - pkt_cnt++; - - /* Updating the statistics block */ - swstats->mem_freed += skb->truesize; - dev_kfree_skb_irq(skb); - - get_info.offset++; - if (get_info.offset == get_info.fifo_len + 1) - get_info.offset = 0; - txdlp = fifo_data->list_info[get_info.offset].list_virt_addr; - fifo_data->tx_curr_get_info.offset = get_info.offset; - } - - s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq); - - spin_unlock_irqrestore(&fifo_data->tx_lock, flags); -} - -/** - * s2io_mdio_write - Function to write in to MDIO registers - * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS) - * @addr : address value - * @value : data value - * @dev : pointer to net_device structure - * Description: - * This function is used to write values to the MDIO registers - * NONE - */ -static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, - struct net_device *dev) -{ - u64 val64; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - /* address transaction */ - val64 = MDIO_MMD_INDX_ADDR(addr) | - MDIO_MMD_DEV_ADDR(mmd_type) | - MDIO_MMS_PRT_ADDR(0x0); - writeq(val64, &bar0->mdio_control); - val64 = val64 | MDIO_CTRL_START_TRANS(0xE); - writeq(val64, &bar0->mdio_control); - udelay(100); - - /* Data transaction */ - val64 = MDIO_MMD_INDX_ADDR(addr) | - MDIO_MMD_DEV_ADDR(mmd_type) | - MDIO_MMS_PRT_ADDR(0x0) | - MDIO_MDIO_DATA(value) | - MDIO_OP(MDIO_OP_WRITE_TRANS); - writeq(val64, &bar0->mdio_control); - val64 = val64 | MDIO_CTRL_START_TRANS(0xE); - writeq(val64, &bar0->mdio_control); - udelay(100); - - val64 = MDIO_MMD_INDX_ADDR(addr) | - MDIO_MMD_DEV_ADDR(mmd_type) | - MDIO_MMS_PRT_ADDR(0x0) | - MDIO_OP(MDIO_OP_READ_TRANS); - writeq(val64, &bar0->mdio_control); - val64 = val64 | MDIO_CTRL_START_TRANS(0xE); - writeq(val64, &bar0->mdio_control); - udelay(100); -} - -/** - * s2io_mdio_read - Function to write in to MDIO registers - * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS) - * @addr : address value - * @dev : pointer to net_device structure - * Description: - * This function is used to read values to the MDIO registers - * NONE - */ -static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev) -{ - u64 val64 = 0x0; - u64 rval64 = 0x0; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - /* address transaction */ - val64 = val64 | (MDIO_MMD_INDX_ADDR(addr) - | MDIO_MMD_DEV_ADDR(mmd_type) - | MDIO_MMS_PRT_ADDR(0x0)); - writeq(val64, &bar0->mdio_control); - val64 = val64 | MDIO_CTRL_START_TRANS(0xE); - writeq(val64, &bar0->mdio_control); - udelay(100); - - /* Data transaction */ - val64 = MDIO_MMD_INDX_ADDR(addr) | - MDIO_MMD_DEV_ADDR(mmd_type) | - MDIO_MMS_PRT_ADDR(0x0) | - MDIO_OP(MDIO_OP_READ_TRANS); - writeq(val64, &bar0->mdio_control); - val64 = val64 | MDIO_CTRL_START_TRANS(0xE); - writeq(val64, &bar0->mdio_control); - udelay(100); - - /* Read the value from regs */ - rval64 = readq(&bar0->mdio_control); - rval64 = rval64 & 0xFFFF0000; - rval64 = rval64 >> 16; - return rval64; -} - -/** - * s2io_chk_xpak_counter - Function to check the status of the xpak counters - * @counter : counter value to be updated - * @flag : flag to indicate the status - * @type : counter type - * Description: - * This function is to check the status of the xpak counters value - * NONE - */ - -static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, - u16 flag, u16 type) -{ - u64 mask = 0x3; - u64 val64; - int i; - for (i = 0; i < index; i++) - mask = mask << 0x2; - - if (flag > 0) { - *counter = *counter + 1; - val64 = *regs_stat & mask; - val64 = val64 >> (index * 0x2); - val64 = val64 + 1; - if (val64 == 3) { - switch (type) { - case 1: - DBG_PRINT(ERR_DBG, - "Take Xframe NIC out of service.\n"); - DBG_PRINT(ERR_DBG, -"Excessive temperatures may result in premature transceiver failure.\n"); - break; - case 2: - DBG_PRINT(ERR_DBG, - "Take Xframe NIC out of service.\n"); - DBG_PRINT(ERR_DBG, -"Excessive bias currents may indicate imminent laser diode failure.\n"); - break; - case 3: - DBG_PRINT(ERR_DBG, - "Take Xframe NIC out of service.\n"); - DBG_PRINT(ERR_DBG, -"Excessive laser output power may saturate far-end receiver.\n"); - break; - default: - DBG_PRINT(ERR_DBG, - "Incorrect XPAK Alarm type\n"); - } - val64 = 0x0; - } - val64 = val64 << (index * 0x2); - *regs_stat = (*regs_stat & (~mask)) | (val64); - - } else { - *regs_stat = *regs_stat & (~mask); - } -} - -/** - * s2io_updt_xpak_counter - Function to update the xpak counters - * @dev : pointer to net_device struct - * Description: - * This function is to upate the status of the xpak counters value - * NONE - */ -static void s2io_updt_xpak_counter(struct net_device *dev) -{ - u16 flag = 0x0; - u16 type = 0x0; - u16 val16 = 0x0; - u64 val64 = 0x0; - u64 addr = 0x0; - - struct s2io_nic *sp = netdev_priv(dev); - struct stat_block *stats = sp->mac_control.stats_info; - struct xpakStat *xstats = &stats->xpak_stat; - - /* Check the communication with the MDIO slave */ - addr = MDIO_CTRL1; - val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); - if ((val64 == 0xFFFF) || (val64 == 0x0000)) { - DBG_PRINT(ERR_DBG, - "ERR: MDIO slave access failed - Returned %llx\n", - (unsigned long long)val64); - return; - } - - /* Check for the expected value of control reg 1 */ - if (val64 != MDIO_CTRL1_SPEED10G) { - DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - " - "Returned: %llx- Expected: 0x%x\n", - (unsigned long long)val64, MDIO_CTRL1_SPEED10G); - return; - } - - /* Loading the DOM register to MDIO register */ - addr = 0xA100; - s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev); - val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); - - /* Reading the Alarm flags */ - addr = 0xA070; - val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); - - flag = CHECKBIT(val64, 0x7); - type = 1; - s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high, - &xstats->xpak_regs_stat, - 0x0, flag, type); - - if (CHECKBIT(val64, 0x6)) - xstats->alarm_transceiver_temp_low++; - - flag = CHECKBIT(val64, 0x3); - type = 2; - s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high, - &xstats->xpak_regs_stat, - 0x2, flag, type); - - if (CHECKBIT(val64, 0x2)) - xstats->alarm_laser_bias_current_low++; - - flag = CHECKBIT(val64, 0x1); - type = 3; - s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high, - &xstats->xpak_regs_stat, - 0x4, flag, type); - - if (CHECKBIT(val64, 0x0)) - xstats->alarm_laser_output_power_low++; - - /* Reading the Warning flags */ - addr = 0xA074; - val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); - - if (CHECKBIT(val64, 0x7)) - xstats->warn_transceiver_temp_high++; - - if (CHECKBIT(val64, 0x6)) - xstats->warn_transceiver_temp_low++; - - if (CHECKBIT(val64, 0x3)) - xstats->warn_laser_bias_current_high++; - - if (CHECKBIT(val64, 0x2)) - xstats->warn_laser_bias_current_low++; - - if (CHECKBIT(val64, 0x1)) - xstats->warn_laser_output_power_high++; - - if (CHECKBIT(val64, 0x0)) - xstats->warn_laser_output_power_low++; -} - -/** - * wait_for_cmd_complete - waits for a command to complete. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * Description: Function that waits for a command to Write into RMAC - * ADDR DATA registers to be completed and returns either success or - * error depending on whether the command was complete or not. - * Return value: - * SUCCESS on success and FAILURE on failure. - */ - -static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, - int bit_state) -{ - int ret = FAILURE, cnt = 0, delay = 1; - u64 val64; - - if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET)) - return FAILURE; - - do { - val64 = readq(addr); - if (bit_state == S2IO_BIT_RESET) { - if (!(val64 & busy_bit)) { - ret = SUCCESS; - break; - } - } else { - if (val64 & busy_bit) { - ret = SUCCESS; - break; - } - } - - if (in_interrupt()) - mdelay(delay); - else - msleep(delay); - - if (++cnt >= 10) - delay = 50; - } while (cnt < 20); - return ret; -} -/* - * check_pci_device_id - Checks if the device id is supported - * @id : device id - * Description: Function to check if the pci device id is supported by driver. - * Return value: Actual device id if supported else PCI_ANY_ID - */ -static u16 check_pci_device_id(u16 id) -{ - switch (id) { - case PCI_DEVICE_ID_HERC_WIN: - case PCI_DEVICE_ID_HERC_UNI: - return XFRAME_II_DEVICE; - case PCI_DEVICE_ID_S2IO_UNI: - case PCI_DEVICE_ID_S2IO_WIN: - return XFRAME_I_DEVICE; - default: - return PCI_ANY_ID; - } -} - -/** - * s2io_reset - Resets the card. - * @sp : private member of the device structure. - * Description: Function to Reset the card. This function then also - * restores the previously saved PCI configuration space registers as - * the card reset also resets the configuration space. - * Return value: - * void. - */ - -static void s2io_reset(struct s2io_nic *sp) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64; - u16 subid, pci_cmd; - int i; - u16 val16; - unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt; - unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt; - struct stat_block *stats; - struct swStat *swstats; - - DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n", - __func__, pci_name(sp->pdev)); - - /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); - - val64 = SW_RESET_ALL; - writeq(val64, &bar0->sw_reset); - if (strstr(sp->product_name, "CX4")) - msleep(750); - msleep(250); - for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) { - - /* Restore the PCI state saved during initialization. */ - pci_restore_state(sp->pdev); - pci_save_state(sp->pdev); - pci_read_config_word(sp->pdev, 0x2, &val16); - if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) - break; - msleep(200); - } - - if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) - DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__); - - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd); - - s2io_init_pci(sp); - - /* Set swapper to enable I/O register access */ - s2io_set_swapper(sp); - - /* restore mac_addr entries */ - do_s2io_restore_unicast_mc(sp); - - /* Restore the MSIX table entries from local variables */ - restore_xmsi_data(sp); - - /* Clear certain PCI/PCI-X fields after reset */ - if (sp->device_type == XFRAME_II_DEVICE) { - /* Clear "detected parity error" bit */ - pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); - - /* Clearing PCIX Ecc status register */ - pci_write_config_dword(sp->pdev, 0x68, 0x7C); - - /* Clearing PCI_STATUS error reflected here */ - writeq(s2BIT(62), &bar0->txpic_int_reg); - } - - /* Reset device statistics maintained by OS */ - memset(&sp->stats, 0, sizeof(struct net_device_stats)); - - stats = sp->mac_control.stats_info; - swstats = &stats->sw_stat; - - /* save link up/down time/cnt, reset/memory/watchdog cnt */ - up_cnt = swstats->link_up_cnt; - down_cnt = swstats->link_down_cnt; - up_time = swstats->link_up_time; - down_time = swstats->link_down_time; - reset_cnt = swstats->soft_reset_cnt; - mem_alloc_cnt = swstats->mem_allocated; - mem_free_cnt = swstats->mem_freed; - watchdog_cnt = swstats->watchdog_timer_cnt; - - memset(stats, 0, sizeof(struct stat_block)); - - /* restore link up/down time/cnt, reset/memory/watchdog cnt */ - swstats->link_up_cnt = up_cnt; - swstats->link_down_cnt = down_cnt; - swstats->link_up_time = up_time; - swstats->link_down_time = down_time; - swstats->soft_reset_cnt = reset_cnt; - swstats->mem_allocated = mem_alloc_cnt; - swstats->mem_freed = mem_free_cnt; - swstats->watchdog_timer_cnt = watchdog_cnt; - - /* SXE-002: Configure link and activity LED to turn it off */ - subid = sp->pdev->subsystem_device; - if (((subid & 0xFF) >= 0x07) && - (sp->device_type == XFRAME_I_DEVICE)) { - val64 = readq(&bar0->gpio_control); - val64 |= 0x0000800000000000ULL; - writeq(val64, &bar0->gpio_control); - val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *)bar0 + 0x2700); - } - - /* - * Clear spurious ECC interrupts that would have occurred on - * XFRAME II cards after reset. - */ - if (sp->device_type == XFRAME_II_DEVICE) { - val64 = readq(&bar0->pcc_err_reg); - writeq(val64, &bar0->pcc_err_reg); - } - - sp->device_enabled_once = false; -} - -/** - * s2io_set_swapper - to set the swapper controle on the card - * @sp : private member of the device structure, - * pointer to the s2io_nic structure. - * Description: Function to set the swapper control on the card - * correctly depending on the 'endianness' of the system. - * Return value: - * SUCCESS on success and FAILURE on failure. - */ - -static int s2io_set_swapper(struct s2io_nic *sp) -{ - struct net_device *dev = sp->dev; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64, valt, valr; - - /* - * Set proper endian settings and verify the same by reading - * the PIF Feed-back register. - */ - - val64 = readq(&bar0->pif_rd_swapper_fb); - if (val64 != 0x0123456789ABCDEFULL) { - int i = 0; - static const u64 value[] = { - 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */ - 0x8100008181000081ULL, /* FE=1, SE=0 */ - 0x4200004242000042ULL, /* FE=0, SE=1 */ - 0 /* FE=0, SE=0 */ - }; - - while (i < 4) { - writeq(value[i], &bar0->swapper_ctrl); - val64 = readq(&bar0->pif_rd_swapper_fb); - if (val64 == 0x0123456789ABCDEFULL) - break; - i++; - } - if (i == 4) { - DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, " - "feedback read %llx\n", - dev->name, (unsigned long long)val64); - return FAILURE; - } - valr = value[i]; - } else { - valr = readq(&bar0->swapper_ctrl); - } - - valt = 0x0123456789ABCDEFULL; - writeq(valt, &bar0->xmsi_address); - val64 = readq(&bar0->xmsi_address); - - if (val64 != valt) { - int i = 0; - static const u64 value[] = { - 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */ - 0x0081810000818100ULL, /* FE=1, SE=0 */ - 0x0042420000424200ULL, /* FE=0, SE=1 */ - 0 /* FE=0, SE=0 */ - }; - - while (i < 4) { - writeq((value[i] | valr), &bar0->swapper_ctrl); - writeq(valt, &bar0->xmsi_address); - val64 = readq(&bar0->xmsi_address); - if (val64 == valt) - break; - i++; - } - if (i == 4) { - unsigned long long x = val64; - DBG_PRINT(ERR_DBG, - "Write failed, Xmsi_addr reads:0x%llx\n", x); - return FAILURE; - } - } - val64 = readq(&bar0->swapper_ctrl); - val64 &= 0xFFFF000000000000ULL; - -#ifdef __BIG_ENDIAN - /* - * The device by default set to a big endian format, so a - * big endian driver need not set anything. - */ - val64 |= (SWAPPER_CTRL_TXP_FE | - SWAPPER_CTRL_TXP_SE | - SWAPPER_CTRL_TXD_R_FE | - SWAPPER_CTRL_TXD_W_FE | - SWAPPER_CTRL_TXF_R_FE | - SWAPPER_CTRL_RXD_R_FE | - SWAPPER_CTRL_RXD_W_FE | - SWAPPER_CTRL_RXF_W_FE | - SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_STATS_FE | - SWAPPER_CTRL_STATS_SE); - if (sp->config.intr_type == INTA) - val64 |= SWAPPER_CTRL_XMSI_SE; - writeq(val64, &bar0->swapper_ctrl); -#else - /* - * Initially we enable all bits to make it accessible by the - * driver, then we selectively enable only those bits that - * we want to set. - */ - val64 |= (SWAPPER_CTRL_TXP_FE | - SWAPPER_CTRL_TXP_SE | - SWAPPER_CTRL_TXD_R_FE | - SWAPPER_CTRL_TXD_R_SE | - SWAPPER_CTRL_TXD_W_FE | - SWAPPER_CTRL_TXD_W_SE | - SWAPPER_CTRL_TXF_R_FE | - SWAPPER_CTRL_RXD_R_FE | - SWAPPER_CTRL_RXD_R_SE | - SWAPPER_CTRL_RXD_W_FE | - SWAPPER_CTRL_RXD_W_SE | - SWAPPER_CTRL_RXF_W_FE | - SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_STATS_FE | - SWAPPER_CTRL_STATS_SE); - if (sp->config.intr_type == INTA) - val64 |= SWAPPER_CTRL_XMSI_SE; - writeq(val64, &bar0->swapper_ctrl); -#endif - val64 = readq(&bar0->swapper_ctrl); - - /* - * Verifying if endian settings are accurate by reading a - * feedback register. - */ - val64 = readq(&bar0->pif_rd_swapper_fb); - if (val64 != 0x0123456789ABCDEFULL) { - /* Endian settings are incorrect, calls for another dekko. */ - DBG_PRINT(ERR_DBG, - "%s: Endian settings are wrong, feedback read %llx\n", - dev->name, (unsigned long long)val64); - return FAILURE; - } - - return SUCCESS; -} - -static int wait_for_msix_trans(struct s2io_nic *nic, int i) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 val64; - int ret = 0, cnt = 0; - - do { - val64 = readq(&bar0->xmsi_access); - if (!(val64 & s2BIT(15))) - break; - mdelay(1); - cnt++; - } while (cnt < 5); - if (cnt == 5) { - DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); - ret = 1; - } - - return ret; -} - -static void restore_xmsi_data(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 val64; - int i, msix_index; - - if (nic->device_type == XFRAME_I_DEVICE) - return; - - for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { - msix_index = (i) ? ((i-1) * 8 + 1) : 0; - writeq(nic->msix_info[i].addr, &bar0->xmsi_address); - writeq(nic->msix_info[i].data, &bar0->xmsi_data); - val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6)); - writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, msix_index)) { - DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", - __func__, msix_index); - continue; - } - } -} - -static void store_xmsi_data(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 val64, addr, data; - int i, msix_index; - - if (nic->device_type == XFRAME_I_DEVICE) - return; - - /* Store and display */ - for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { - msix_index = (i) ? ((i-1) * 8 + 1) : 0; - val64 = (s2BIT(15) | vBIT(msix_index, 26, 6)); - writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, msix_index)) { - DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", - __func__, msix_index); - continue; - } - addr = readq(&bar0->xmsi_address); - data = readq(&bar0->xmsi_data); - if (addr && data) { - nic->msix_info[i].addr = addr; - nic->msix_info[i].data = data; - } - } -} - -static int s2io_enable_msi_x(struct s2io_nic *nic) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 rx_mat; - u16 msi_control; /* Temp variable */ - int ret, i, j, msix_indx = 1; - int size; - struct stat_block *stats = nic->mac_control.stats_info; - struct swStat *swstats = &stats->sw_stat; - - size = nic->num_entries * sizeof(struct msix_entry); - nic->entries = kzalloc(size, GFP_KERNEL); - if (!nic->entries) { - DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", - __func__); - swstats->mem_alloc_fail_cnt++; - return -ENOMEM; - } - swstats->mem_allocated += size; - - size = nic->num_entries * sizeof(struct s2io_msix_entry); - nic->s2io_entries = kzalloc(size, GFP_KERNEL); - if (!nic->s2io_entries) { - DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", - __func__); - swstats->mem_alloc_fail_cnt++; - kfree(nic->entries); - swstats->mem_freed - += (nic->num_entries * sizeof(struct msix_entry)); - return -ENOMEM; - } - swstats->mem_allocated += size; - - nic->entries[0].entry = 0; - nic->s2io_entries[0].entry = 0; - nic->s2io_entries[0].in_use = MSIX_FLG; - nic->s2io_entries[0].type = MSIX_ALARM_TYPE; - nic->s2io_entries[0].arg = &nic->mac_control.fifos; - - for (i = 1; i < nic->num_entries; i++) { - nic->entries[i].entry = ((i - 1) * 8) + 1; - nic->s2io_entries[i].entry = ((i - 1) * 8) + 1; - nic->s2io_entries[i].arg = NULL; - nic->s2io_entries[i].in_use = 0; - } - - rx_mat = readq(&bar0->rx_mat); - for (j = 0; j < nic->config.rx_ring_num; j++) { - rx_mat |= RX_MAT_SET(j, msix_indx); - nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j]; - nic->s2io_entries[j+1].type = MSIX_RING_TYPE; - nic->s2io_entries[j+1].in_use = MSIX_FLG; - msix_indx += 8; - } - writeq(rx_mat, &bar0->rx_mat); - readq(&bar0->rx_mat); - - ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries); - /* We fail init if error or we get less vectors than min required */ - if (ret) { - DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n"); - kfree(nic->entries); - swstats->mem_freed += nic->num_entries * - sizeof(struct msix_entry); - kfree(nic->s2io_entries); - swstats->mem_freed += nic->num_entries * - sizeof(struct s2io_msix_entry); - nic->entries = NULL; - nic->s2io_entries = NULL; - return -ENOMEM; - } - - /* - * To enable MSI-X, MSI also needs to be enabled, due to a bug - * in the herc NIC. (Temp change, needs to be removed later) - */ - pci_read_config_word(nic->pdev, 0x42, &msi_control); - msi_control |= 0x1; /* Enable MSI */ - pci_write_config_word(nic->pdev, 0x42, msi_control); - - return 0; -} - -/* Handle software interrupt used during MSI(X) test */ -static irqreturn_t s2io_test_intr(int irq, void *dev_id) -{ - struct s2io_nic *sp = dev_id; - - sp->msi_detected = 1; - wake_up(&sp->msi_wait); - - return IRQ_HANDLED; -} - -/* Test interrupt path by forcing a a software IRQ */ -static int s2io_test_msi(struct s2io_nic *sp) -{ - struct pci_dev *pdev = sp->pdev; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - int err; - u64 val64, saved64; - - err = request_irq(sp->entries[1].vector, s2io_test_intr, 0, - sp->name, sp); - if (err) { - DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n", - sp->dev->name, pci_name(pdev), pdev->irq); - return err; - } - - init_waitqueue_head(&sp->msi_wait); - sp->msi_detected = 0; - - saved64 = val64 = readq(&bar0->scheduled_int_ctrl); - val64 |= SCHED_INT_CTRL_ONE_SHOT; - val64 |= SCHED_INT_CTRL_TIMER_EN; - val64 |= SCHED_INT_CTRL_INT2MSI(1); - writeq(val64, &bar0->scheduled_int_ctrl); - - wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10); - - if (!sp->msi_detected) { - /* MSI(X) test failed, go back to INTx mode */ - DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated " - "using MSI(X) during test\n", - sp->dev->name, pci_name(pdev)); - - err = -EOPNOTSUPP; - } - - free_irq(sp->entries[1].vector, sp); - - writeq(saved64, &bar0->scheduled_int_ctrl); - - return err; -} - -static void remove_msix_isr(struct s2io_nic *sp) -{ - int i; - u16 msi_control; - - for (i = 0; i < sp->num_entries; i++) { - if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) { - int vector = sp->entries[i].vector; - void *arg = sp->s2io_entries[i].arg; - free_irq(vector, arg); - } - } - - kfree(sp->entries); - kfree(sp->s2io_entries); - sp->entries = NULL; - sp->s2io_entries = NULL; - - pci_read_config_word(sp->pdev, 0x42, &msi_control); - msi_control &= 0xFFFE; /* Disable MSI */ - pci_write_config_word(sp->pdev, 0x42, msi_control); - - pci_disable_msix(sp->pdev); -} - -static void remove_inta_isr(struct s2io_nic *sp) -{ - struct net_device *dev = sp->dev; - - free_irq(sp->pdev->irq, dev); -} - -/* ********************************************************* * - * Functions defined below concern the OS part of the driver * - * ********************************************************* */ - -/** - * s2io_open - open entry point of the driver - * @dev : pointer to the device structure. - * Description: - * This function is the open entry point of the driver. It mainly calls a - * function to allocate Rx buffers and inserts them into the buffer - * descriptors and then enables the Rx part of the NIC. - * Return value: - * 0 on success and an appropriate (-)ve integer as defined in errno.h - * file on failure. - */ - -static int s2io_open(struct net_device *dev) -{ - struct s2io_nic *sp = netdev_priv(dev); - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - int err = 0; - - /* - * Make sure you have link off by default every time - * Nic is initialized - */ - netif_carrier_off(dev); - sp->last_link_state = 0; - - /* Initialize H/W and enable interrupts */ - err = s2io_card_up(sp); - if (err) { - DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", - dev->name); - goto hw_init_failed; - } - - if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) { - DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); - s2io_card_down(sp); - err = -ENODEV; - goto hw_init_failed; - } - s2io_start_all_tx_queue(sp); - return 0; - -hw_init_failed: - if (sp->config.intr_type == MSI_X) { - if (sp->entries) { - kfree(sp->entries); - swstats->mem_freed += sp->num_entries * - sizeof(struct msix_entry); - } - if (sp->s2io_entries) { - kfree(sp->s2io_entries); - swstats->mem_freed += sp->num_entries * - sizeof(struct s2io_msix_entry); - } - } - return err; -} - -/** - * s2io_close -close entry point of the driver - * @dev : device pointer. - * Description: - * This is the stop entry point of the driver. It needs to undo exactly - * whatever was done by the open entry point,thus it's usually referred to - * as the close function.Among other things this function mainly stops the - * Rx side of the NIC and frees all the Rx buffers in the Rx rings. - * Return value: - * 0 on success and an appropriate (-)ve integer as defined in errno.h - * file on failure. - */ - -static int s2io_close(struct net_device *dev) -{ - struct s2io_nic *sp = netdev_priv(dev); - struct config_param *config = &sp->config; - u64 tmp64; - int offset; - - /* Return if the device is already closed * - * Can happen when s2io_card_up failed in change_mtu * - */ - if (!is_s2io_card_up(sp)) - return 0; - - s2io_stop_all_tx_queue(sp); - /* delete all populated mac entries */ - for (offset = 1; offset < config->max_mc_addr; offset++) { - tmp64 = do_s2io_read_unicast_mc(sp, offset); - if (tmp64 != S2IO_DISABLE_MAC_ENTRY) - do_s2io_delete_unicast_mc(sp, tmp64); - } - - s2io_card_down(sp); - - return 0; -} - -/** - * s2io_xmit - Tx entry point of te driver - * @skb : the socket buffer containing the Tx data. - * @dev : device pointer. - * Description : - * This function is the Tx entry point of the driver. S2IO NIC supports - * certain protocol assist features on Tx side, namely CSO, S/G, LSO. - * NOTE: when device can't queue the pkt,just the trans_start variable will - * not be upadted. - * Return value: - * 0 on success & 1 on failure. - */ - -static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct s2io_nic *sp = netdev_priv(dev); - u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off; - register u64 val64; - struct TxD *txdp; - struct TxFIFO_element __iomem *tx_fifo; - unsigned long flags = 0; - u16 vlan_tag = 0; - struct fifo_info *fifo = NULL; - int do_spin_lock = 1; - int offload_type; - int enable_per_list_interrupt = 0; - struct config_param *config = &sp->config; - struct mac_info *mac_control = &sp->mac_control; - struct stat_block *stats = mac_control->stats_info; - struct swStat *swstats = &stats->sw_stat; - - DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); - - if (unlikely(skb->len <= 0)) { - DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (!is_s2io_card_up(sp)) { - DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", - dev->name); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - queue = 0; - if (vlan_tx_tag_present(skb)) - vlan_tag = vlan_tx_tag_get(skb); - if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) { - if (skb->protocol == htons(ETH_P_IP)) { - struct iphdr *ip; - struct tcphdr *th; - ip = ip_hdr(skb); - - if (!ip_is_fragment(ip)) { - th = (struct tcphdr *)(((unsigned char *)ip) + - ip->ihl*4); - - if (ip->protocol == IPPROTO_TCP) { - queue_len = sp->total_tcp_fifos; - queue = (ntohs(th->source) + - ntohs(th->dest)) & - sp->fifo_selector[queue_len - 1]; - if (queue >= queue_len) - queue = queue_len - 1; - } else if (ip->protocol == IPPROTO_UDP) { - queue_len = sp->total_udp_fifos; - queue = (ntohs(th->source) + - ntohs(th->dest)) & - sp->fifo_selector[queue_len - 1]; - if (queue >= queue_len) - queue = queue_len - 1; - queue += sp->udp_fifo_idx; - if (skb->len > 1024) - enable_per_list_interrupt = 1; - do_spin_lock = 0; - } - } - } - } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING) - /* get fifo number based on skb->priority value */ - queue = config->fifo_mapping - [skb->priority & (MAX_TX_FIFOS - 1)]; - fifo = &mac_control->fifos[queue]; - - if (do_spin_lock) - spin_lock_irqsave(&fifo->tx_lock, flags); - else { - if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) - return NETDEV_TX_LOCKED; - } - - if (sp->config.multiq) { - if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { - spin_unlock_irqrestore(&fifo->tx_lock, flags); - return NETDEV_TX_BUSY; - } - } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) { - if (netif_queue_stopped(dev)) { - spin_unlock_irqrestore(&fifo->tx_lock, flags); - return NETDEV_TX_BUSY; - } - } - - put_off = (u16)fifo->tx_curr_put_info.offset; - get_off = (u16)fifo->tx_curr_get_info.offset; - txdp = fifo->list_info[put_off].list_virt_addr; - - queue_len = fifo->tx_curr_put_info.fifo_len + 1; - /* Avoid "put" pointer going beyond "get" pointer */ - if (txdp->Host_Control || - ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) { - DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); - s2io_stop_tx_queue(sp, fifo->fifo_no); - dev_kfree_skb(skb); - spin_unlock_irqrestore(&fifo->tx_lock, flags); - return NETDEV_TX_OK; - } - - offload_type = s2io_offload_type(skb); - if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { - txdp->Control_1 |= TXD_TCP_LSO_EN; - txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb)); - } - if (skb->ip_summed == CHECKSUM_PARTIAL) { - txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | - TXD_TX_CKO_TCP_EN | - TXD_TX_CKO_UDP_EN); - } - txdp->Control_1 |= TXD_GATHER_CODE_FIRST; - txdp->Control_1 |= TXD_LIST_OWN_XENA; - txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no); - if (enable_per_list_interrupt) - if (put_off & (queue_len >> 5)) - txdp->Control_2 |= TXD_INT_TYPE_PER_LIST; - if (vlan_tag) { - txdp->Control_2 |= TXD_VLAN_ENABLE; - txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); - } - - frg_len = skb_headlen(skb); - if (offload_type == SKB_GSO_UDP) { - int ufo_size; - - ufo_size = s2io_udp_mss(skb); - ufo_size &= ~7; - txdp->Control_1 |= TXD_UFO_EN; - txdp->Control_1 |= TXD_UFO_MSS(ufo_size); - txdp->Control_1 |= TXD_BUFFER0_SIZE(8); -#ifdef __BIG_ENDIAN - /* both variants do cpu_to_be64(be32_to_cpu(...)) */ - fifo->ufo_in_band_v[put_off] = - (__force u64)skb_shinfo(skb)->ip6_frag_id; -#else - fifo->ufo_in_band_v[put_off] = - (__force u64)skb_shinfo(skb)->ip6_frag_id << 32; -#endif - txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v; - txdp->Buffer_Pointer = pci_map_single(sp->pdev, - fifo->ufo_in_band_v, - sizeof(u64), - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer)) - goto pci_map_failed; - txdp++; - } - - txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data, - frg_len, PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer)) - goto pci_map_failed; - - txdp->Host_Control = (unsigned long)skb; - txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); - if (offload_type == SKB_GSO_UDP) - txdp->Control_1 |= TXD_UFO_EN; - - frg_cnt = skb_shinfo(skb)->nr_frags; - /* For fragmented SKB. */ - for (i = 0; i < frg_cnt; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - /* A '0' length fragment will be ignored */ - if (!frag->size) - continue; - txdp++; - txdp->Buffer_Pointer = (u64)pci_map_page(sp->pdev, frag->page, - frag->page_offset, - frag->size, - PCI_DMA_TODEVICE); - txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size); - if (offload_type == SKB_GSO_UDP) - txdp->Control_1 |= TXD_UFO_EN; - } - txdp->Control_1 |= TXD_GATHER_CODE_LAST; - - if (offload_type == SKB_GSO_UDP) - frg_cnt++; /* as Txd0 was used for inband header */ - - tx_fifo = mac_control->tx_FIFO_start[queue]; - val64 = fifo->list_info[put_off].list_phy_addr; - writeq(val64, &tx_fifo->TxDL_Pointer); - - val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | - TX_FIFO_LAST_LIST); - if (offload_type) - val64 |= TX_FIFO_SPECIAL_FUNC; - - writeq(val64, &tx_fifo->List_Control); - - mmiowb(); - - put_off++; - if (put_off == fifo->tx_curr_put_info.fifo_len + 1) - put_off = 0; - fifo->tx_curr_put_info.offset = put_off; - - /* Avoid "put" pointer going beyond "get" pointer */ - if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) { - swstats->fifo_full_cnt++; - DBG_PRINT(TX_DBG, - "No free TxDs for xmit, Put: 0x%x Get:0x%x\n", - put_off, get_off); - s2io_stop_tx_queue(sp, fifo->fifo_no); - } - swstats->mem_allocated += skb->truesize; - spin_unlock_irqrestore(&fifo->tx_lock, flags); - - if (sp->config.intr_type == MSI_X) - tx_intr_handler(fifo); - - return NETDEV_TX_OK; - -pci_map_failed: - swstats->pci_map_fail_cnt++; - s2io_stop_tx_queue(sp, fifo->fifo_no); - swstats->mem_freed += skb->truesize; - dev_kfree_skb(skb); - spin_unlock_irqrestore(&fifo->tx_lock, flags); - return NETDEV_TX_OK; -} - -static void -s2io_alarm_handle(unsigned long data) -{ - struct s2io_nic *sp = (struct s2io_nic *)data; - struct net_device *dev = sp->dev; - - s2io_handle_errors(dev); - mod_timer(&sp->alarm_timer, jiffies + HZ / 2); -} - -static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) -{ - struct ring_info *ring = (struct ring_info *)dev_id; - struct s2io_nic *sp = ring->nic; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - if (unlikely(!is_s2io_card_up(sp))) - return IRQ_HANDLED; - - if (sp->config.napi) { - u8 __iomem *addr = NULL; - u8 val8 = 0; - - addr = (u8 __iomem *)&bar0->xmsi_mask_reg; - addr += (7 - ring->ring_no); - val8 = (ring->ring_no == 0) ? 0x7f : 0xff; - writeb(val8, addr); - val8 = readb(addr); - napi_schedule(&ring->napi); - } else { - rx_intr_handler(ring, 0); - s2io_chk_rx_buffers(sp, ring); - } - - return IRQ_HANDLED; -} - -static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id) -{ - int i; - struct fifo_info *fifos = (struct fifo_info *)dev_id; - struct s2io_nic *sp = fifos->nic; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - struct config_param *config = &sp->config; - u64 reason; - - if (unlikely(!is_s2io_card_up(sp))) - return IRQ_NONE; - - reason = readq(&bar0->general_int_status); - if (unlikely(reason == S2IO_MINUS_ONE)) - /* Nothing much can be done. Get out */ - return IRQ_HANDLED; - - if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) { - writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); - - if (reason & GEN_INTR_TXPIC) - s2io_txpic_intr_handle(sp); - - if (reason & GEN_INTR_TXTRAFFIC) - writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); - - for (i = 0; i < config->tx_fifo_num; i++) - tx_intr_handler(&fifos[i]); - - writeq(sp->general_int_mask, &bar0->general_int_mask); - readl(&bar0->general_int_status); - return IRQ_HANDLED; - } - /* The interrupt was not raised by us */ - return IRQ_NONE; -} - -static void s2io_txpic_intr_handle(struct s2io_nic *sp) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64; - - val64 = readq(&bar0->pic_int_status); - if (val64 & PIC_INT_GPIO) { - val64 = readq(&bar0->gpio_int_reg); - if ((val64 & GPIO_INT_REG_LINK_DOWN) && - (val64 & GPIO_INT_REG_LINK_UP)) { - /* - * This is unstable state so clear both up/down - * interrupt and adapter to re-evaluate the link state. - */ - val64 |= GPIO_INT_REG_LINK_DOWN; - val64 |= GPIO_INT_REG_LINK_UP; - writeq(val64, &bar0->gpio_int_reg); - val64 = readq(&bar0->gpio_int_mask); - val64 &= ~(GPIO_INT_MASK_LINK_UP | - GPIO_INT_MASK_LINK_DOWN); - writeq(val64, &bar0->gpio_int_mask); - } else if (val64 & GPIO_INT_REG_LINK_UP) { - val64 = readq(&bar0->adapter_status); - /* Enable Adapter */ - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_CNTL_EN; - writeq(val64, &bar0->adapter_control); - val64 |= ADAPTER_LED_ON; - writeq(val64, &bar0->adapter_control); - if (!sp->device_enabled_once) - sp->device_enabled_once = 1; - - s2io_link(sp, LINK_UP); - /* - * unmask link down interrupt and mask link-up - * intr - */ - val64 = readq(&bar0->gpio_int_mask); - val64 &= ~GPIO_INT_MASK_LINK_DOWN; - val64 |= GPIO_INT_MASK_LINK_UP; - writeq(val64, &bar0->gpio_int_mask); - - } else if (val64 & GPIO_INT_REG_LINK_DOWN) { - val64 = readq(&bar0->adapter_status); - s2io_link(sp, LINK_DOWN); - /* Link is down so unmaks link up interrupt */ - val64 = readq(&bar0->gpio_int_mask); - val64 &= ~GPIO_INT_MASK_LINK_UP; - val64 |= GPIO_INT_MASK_LINK_DOWN; - writeq(val64, &bar0->gpio_int_mask); - - /* turn off LED */ - val64 = readq(&bar0->adapter_control); - val64 = val64 & (~ADAPTER_LED_ON); - writeq(val64, &bar0->adapter_control); - } - } - val64 = readq(&bar0->gpio_int_mask); -} - -/** - * do_s2io_chk_alarm_bit - Check for alarm and incrment the counter - * @value: alarm bits - * @addr: address value - * @cnt: counter variable - * Description: Check for alarm and increment the counter - * Return Value: - * 1 - if alarm bit set - * 0 - if alarm bit is not set - */ -static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr, - unsigned long long *cnt) -{ - u64 val64; - val64 = readq(addr); - if (val64 & value) { - writeq(val64, addr); - (*cnt)++; - return 1; - } - return 0; - -} - -/** - * s2io_handle_errors - Xframe error indication handler - * @nic: device private variable - * Description: Handle alarms such as loss of link, single or - * double ECC errors, critical and serious errors. - * Return Value: - * NONE - */ -static void s2io_handle_errors(void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 temp64 = 0, val64 = 0; - int i = 0; - - struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat; - struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat; - - if (!is_s2io_card_up(sp)) - return; - - if (pci_channel_offline(sp->pdev)) - return; - - memset(&sw_stat->ring_full_cnt, 0, - sizeof(sw_stat->ring_full_cnt)); - - /* Handling the XPAK counters update */ - if (stats->xpak_timer_count < 72000) { - /* waiting for an hour */ - stats->xpak_timer_count++; - } else { - s2io_updt_xpak_counter(dev); - /* reset the count to zero */ - stats->xpak_timer_count = 0; - } - - /* Handling link status change error Intr */ - if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) { - val64 = readq(&bar0->mac_rmac_err_reg); - writeq(val64, &bar0->mac_rmac_err_reg); - if (val64 & RMAC_LINK_STATE_CHANGE_INT) - schedule_work(&sp->set_link_task); - } - - /* In case of a serious error, the device will be Reset. */ - if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source, - &sw_stat->serious_err_cnt)) - goto reset; - - /* Check for data parity error */ - if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg, - &sw_stat->parity_err_cnt)) - goto reset; - - /* Check for ring full counter */ - if (sp->device_type == XFRAME_II_DEVICE) { - val64 = readq(&bar0->ring_bump_counter1); - for (i = 0; i < 4; i++) { - temp64 = (val64 & vBIT(0xFFFF, (i*16), 16)); - temp64 >>= 64 - ((i+1)*16); - sw_stat->ring_full_cnt[i] += temp64; - } - - val64 = readq(&bar0->ring_bump_counter2); - for (i = 0; i < 4; i++) { - temp64 = (val64 & vBIT(0xFFFF, (i*16), 16)); - temp64 >>= 64 - ((i+1)*16); - sw_stat->ring_full_cnt[i+4] += temp64; - } - } - - val64 = readq(&bar0->txdma_int_status); - /*check for pfc_err*/ - if (val64 & TXDMA_PFC_INT) { - if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM | - PFC_MISC_0_ERR | PFC_MISC_1_ERR | - PFC_PCIX_ERR, - &bar0->pfc_err_reg, - &sw_stat->pfc_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, - &bar0->pfc_err_reg, - &sw_stat->pfc_err_cnt); - } - - /*check for tda_err*/ - if (val64 & TXDMA_TDA_INT) { - if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | - TDA_SM0_ERR_ALARM | - TDA_SM1_ERR_ALARM, - &bar0->tda_err_reg, - &sw_stat->tda_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR, - &bar0->tda_err_reg, - &sw_stat->tda_err_cnt); - } - /*check for pcc_err*/ - if (val64 & TXDMA_PCC_INT) { - if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM | - PCC_N_SERR | PCC_6_COF_OV_ERR | - PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR | - PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR | - PCC_TXB_ECC_DB_ERR, - &bar0->pcc_err_reg, - &sw_stat->pcc_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR, - &bar0->pcc_err_reg, - &sw_stat->pcc_err_cnt); - } - - /*check for tti_err*/ - if (val64 & TXDMA_TTI_INT) { - if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, - &bar0->tti_err_reg, - &sw_stat->tti_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR, - &bar0->tti_err_reg, - &sw_stat->tti_err_cnt); - } - - /*check for lso_err*/ - if (val64 & TXDMA_LSO_INT) { - if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT | - LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM, - &bar0->lso_err_reg, - &sw_stat->lso_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW, - &bar0->lso_err_reg, - &sw_stat->lso_err_cnt); - } - - /*check for tpa_err*/ - if (val64 & TXDMA_TPA_INT) { - if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, - &bar0->tpa_err_reg, - &sw_stat->tpa_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, - &bar0->tpa_err_reg, - &sw_stat->tpa_err_cnt); - } - - /*check for sm_err*/ - if (val64 & TXDMA_SM_INT) { - if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, - &bar0->sm_err_reg, - &sw_stat->sm_err_cnt)) - goto reset; - } - - val64 = readq(&bar0->mac_int_status); - if (val64 & MAC_INT_STATUS_TMAC_INT) { - if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR, - &bar0->mac_tmac_err_reg, - &sw_stat->mac_tmac_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR | - TMAC_DESC_ECC_SG_ERR | - TMAC_DESC_ECC_DB_ERR, - &bar0->mac_tmac_err_reg, - &sw_stat->mac_tmac_err_cnt); - } - - val64 = readq(&bar0->xgxs_int_status); - if (val64 & XGXS_INT_STATUS_TXGXS) { - if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR, - &bar0->xgxs_txgxs_err_reg, - &sw_stat->xgxs_txgxs_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR, - &bar0->xgxs_txgxs_err_reg, - &sw_stat->xgxs_txgxs_err_cnt); - } - - val64 = readq(&bar0->rxdma_int_status); - if (val64 & RXDMA_INT_RC_INT_M) { - if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | - RC_FTC_ECC_DB_ERR | - RC_PRCn_SM_ERR_ALARM | - RC_FTC_SM_ERR_ALARM, - &bar0->rc_err_reg, - &sw_stat->rc_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | - RC_FTC_ECC_SG_ERR | - RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg, - &sw_stat->rc_err_cnt); - if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | - PRC_PCI_AB_WR_Rn | - PRC_PCI_AB_F_WR_Rn, - &bar0->prc_pcix_err_reg, - &sw_stat->prc_pcix_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | - PRC_PCI_DP_WR_Rn | - PRC_PCI_DP_F_WR_Rn, - &bar0->prc_pcix_err_reg, - &sw_stat->prc_pcix_err_cnt); - } - - if (val64 & RXDMA_INT_RPA_INT_M) { - if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR, - &bar0->rpa_err_reg, - &sw_stat->rpa_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, - &bar0->rpa_err_reg, - &sw_stat->rpa_err_cnt); - } - - if (val64 & RXDMA_INT_RDA_INT_M) { - if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR | - RDA_FRM_ECC_DB_N_AERR | - RDA_SM1_ERR_ALARM | - RDA_SM0_ERR_ALARM | - RDA_RXD_ECC_DB_SERR, - &bar0->rda_err_reg, - &sw_stat->rda_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | - RDA_FRM_ECC_SG_ERR | - RDA_MISC_ERR | - RDA_PCIX_ERR, - &bar0->rda_err_reg, - &sw_stat->rda_err_cnt); - } - - if (val64 & RXDMA_INT_RTI_INT_M) { - if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, - &bar0->rti_err_reg, - &sw_stat->rti_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR, - &bar0->rti_err_reg, - &sw_stat->rti_err_cnt); - } - - val64 = readq(&bar0->mac_int_status); - if (val64 & MAC_INT_STATUS_RMAC_INT) { - if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR, - &bar0->mac_rmac_err_reg, - &sw_stat->mac_rmac_err_cnt)) - goto reset; - do_s2io_chk_alarm_bit(RMAC_UNUSED_INT | - RMAC_SINGLE_ECC_ERR | - RMAC_DOUBLE_ECC_ERR, - &bar0->mac_rmac_err_reg, - &sw_stat->mac_rmac_err_cnt); - } - - val64 = readq(&bar0->xgxs_int_status); - if (val64 & XGXS_INT_STATUS_RXGXS) { - if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, - &bar0->xgxs_rxgxs_err_reg, - &sw_stat->xgxs_rxgxs_err_cnt)) - goto reset; - } - - val64 = readq(&bar0->mc_int_status); - if (val64 & MC_INT_STATUS_MC_INT) { - if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, - &bar0->mc_err_reg, - &sw_stat->mc_err_cnt)) - goto reset; - - /* Handling Ecc errors */ - if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { - writeq(val64, &bar0->mc_err_reg); - if (val64 & MC_ERR_REG_ECC_ALL_DBL) { - sw_stat->double_ecc_errs++; - if (sp->device_type != XFRAME_II_DEVICE) { - /* - * Reset XframeI only if critical error - */ - if (val64 & - (MC_ERR_REG_MIRI_ECC_DB_ERR_0 | - MC_ERR_REG_MIRI_ECC_DB_ERR_1)) - goto reset; - } - } else - sw_stat->single_ecc_errs++; - } - } - return; - -reset: - s2io_stop_all_tx_queue(sp); - schedule_work(&sp->rst_timer_task); - sw_stat->soft_reset_cnt++; -} - -/** - * s2io_isr - ISR handler of the device . - * @irq: the irq of the device. - * @dev_id: a void pointer to the dev structure of the NIC. - * Description: This function is the ISR handler of the device. It - * identifies the reason for the interrupt and calls the relevant - * service routines. As a contongency measure, this ISR allocates the - * recv buffers, if their numbers are below the panic value which is - * presently set to 25% of the original number of rcv buffers allocated. - * Return value: - * IRQ_HANDLED: will be returned if IRQ was handled by this routine - * IRQ_NONE: will be returned if interrupt is not from our device - */ -static irqreturn_t s2io_isr(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - int i; - u64 reason = 0; - struct mac_info *mac_control; - struct config_param *config; - - /* Pretend we handled any irq's from a disconnected card */ - if (pci_channel_offline(sp->pdev)) - return IRQ_NONE; - - if (!is_s2io_card_up(sp)) - return IRQ_NONE; - - config = &sp->config; - mac_control = &sp->mac_control; - - /* - * Identify the cause for interrupt and call the appropriate - * interrupt handler. Causes for the interrupt could be; - * 1. Rx of packet. - * 2. Tx complete. - * 3. Link down. - */ - reason = readq(&bar0->general_int_status); - - if (unlikely(reason == S2IO_MINUS_ONE)) - return IRQ_HANDLED; /* Nothing much can be done. Get out */ - - if (reason & - (GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) { - writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); - - if (config->napi) { - if (reason & GEN_INTR_RXTRAFFIC) { - napi_schedule(&sp->napi); - writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask); - writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); - readl(&bar0->rx_traffic_int); - } - } else { - /* - * rx_traffic_int reg is an R1 register, writing all 1's - * will ensure that the actual interrupt causing bit - * get's cleared and hence a read can be avoided. - */ - if (reason & GEN_INTR_RXTRAFFIC) - writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); - - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - rx_intr_handler(ring, 0); - } - } - - /* - * tx_traffic_int reg is an R1 register, writing all 1's - * will ensure that the actual interrupt causing bit get's - * cleared and hence a read can be avoided. - */ - if (reason & GEN_INTR_TXTRAFFIC) - writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); - - for (i = 0; i < config->tx_fifo_num; i++) - tx_intr_handler(&mac_control->fifos[i]); - - if (reason & GEN_INTR_TXPIC) - s2io_txpic_intr_handle(sp); - - /* - * Reallocate the buffers from the interrupt handler itself. - */ - if (!config->napi) { - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - s2io_chk_rx_buffers(sp, ring); - } - } - writeq(sp->general_int_mask, &bar0->general_int_mask); - readl(&bar0->general_int_status); - - return IRQ_HANDLED; - - } else if (!reason) { - /* The interrupt was not raised by us */ - return IRQ_NONE; - } - - return IRQ_HANDLED; -} - -/** - * s2io_updt_stats - - */ -static void s2io_updt_stats(struct s2io_nic *sp) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64; - int cnt = 0; - - if (is_s2io_card_up(sp)) { - /* Apprx 30us on a 133 MHz bus */ - val64 = SET_UPDT_CLICKS(10) | - STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN; - writeq(val64, &bar0->stat_cfg); - do { - udelay(100); - val64 = readq(&bar0->stat_cfg); - if (!(val64 & s2BIT(0))) - break; - cnt++; - if (cnt == 5) - break; /* Updt failed */ - } while (1); - } -} - -/** - * s2io_get_stats - Updates the device statistics structure. - * @dev : pointer to the device structure. - * Description: - * This function updates the device statistics structure in the s2io_nic - * structure and returns a pointer to the same. - * Return value: - * pointer to the updated net_device_stats structure. - */ -static struct net_device_stats *s2io_get_stats(struct net_device *dev) -{ - struct s2io_nic *sp = netdev_priv(dev); - struct mac_info *mac_control = &sp->mac_control; - struct stat_block *stats = mac_control->stats_info; - u64 delta; - - /* Configure Stats for immediate updt */ - s2io_updt_stats(sp); - - /* A device reset will cause the on-adapter statistics to be zero'ed. - * This can be done while running by changing the MTU. To prevent the - * system from having the stats zero'ed, the driver keeps a copy of the - * last update to the system (which is also zero'ed on reset). This - * enables the driver to accurately know the delta between the last - * update and the current update. - */ - delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets; - sp->stats.rx_packets += delta; - dev->stats.rx_packets += delta; - - delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets; - sp->stats.tx_packets += delta; - dev->stats.tx_packets += delta; - - delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 | - le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes; - sp->stats.rx_bytes += delta; - dev->stats.rx_bytes += delta; - - delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 | - le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes; - sp->stats.tx_bytes += delta; - dev->stats.tx_bytes += delta; - - delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors; - sp->stats.rx_errors += delta; - dev->stats.rx_errors += delta; - - delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors; - sp->stats.tx_errors += delta; - dev->stats.tx_errors += delta; - - delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped; - sp->stats.rx_dropped += delta; - dev->stats.rx_dropped += delta; - - delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped; - sp->stats.tx_dropped += delta; - dev->stats.tx_dropped += delta; - - /* The adapter MAC interprets pause frames as multicast packets, but - * does not pass them up. This erroneously increases the multicast - * packet count and needs to be deducted when the multicast frame count - * is queried. - */ - delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_vld_mcst_frms); - delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms); - delta -= sp->stats.multicast; - sp->stats.multicast += delta; - dev->stats.multicast += delta; - - delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_usized_frms)) + - le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors; - sp->stats.rx_length_errors += delta; - dev->stats.rx_length_errors += delta; - - delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors; - sp->stats.rx_crc_errors += delta; - dev->stats.rx_crc_errors += delta; - - return &dev->stats; -} - -/** - * s2io_set_multicast - entry point for multicast address enable/disable. - * @dev : pointer to the device structure - * Description: - * This function is a driver entry point which gets called by the kernel - * whenever multicast addresses must be enabled/disabled. This also gets - * called to set/reset promiscuous mode. Depending on the deivce flag, we - * determine, if multicast address must be enabled or if promiscuous mode - * is to be disabled etc. - * Return value: - * void. - */ - -static void s2io_set_multicast(struct net_device *dev) -{ - int i, j, prev_cnt; - struct netdev_hw_addr *ha; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64 = 0, multi_mac = 0x010203040506ULL, mask = - 0xfeffffffffffULL; - u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0; - void __iomem *add; - struct config_param *config = &sp->config; - - if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) { - /* Enable all Multicast addresses */ - writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac), - &bar0->rmac_addr_data0_mem); - writeq(RMAC_ADDR_DATA1_MEM_MASK(mask), - &bar0->rmac_addr_data1_mem); - val64 = RMAC_ADDR_CMD_MEM_WE | - RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1); - writeq(val64, &bar0->rmac_addr_cmd_mem); - /* Wait till command completes */ - wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET); - - sp->m_cast_flg = 1; - sp->all_multi_pos = config->max_mc_addr - 1; - } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) { - /* Disable all Multicast addresses */ - writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), - &bar0->rmac_addr_data0_mem); - writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0), - &bar0->rmac_addr_data1_mem); - val64 = RMAC_ADDR_CMD_MEM_WE | - RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos); - writeq(val64, &bar0->rmac_addr_cmd_mem); - /* Wait till command completes */ - wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET); - - sp->m_cast_flg = 0; - sp->all_multi_pos = 0; - } - - if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) { - /* Put the NIC into promiscuous mode */ - add = &bar0->mac_cfg; - val64 = readq(&bar0->mac_cfg); - val64 |= MAC_CFG_RMAC_PROM_ENABLE; - - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32)val64, add); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64 >> 32), (add + 4)); - - if (vlan_tag_strip != 1) { - val64 = readq(&bar0->rx_pa_cfg); - val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG; - writeq(val64, &bar0->rx_pa_cfg); - sp->vlan_strip_flag = 0; - } - - val64 = readq(&bar0->mac_cfg); - sp->promisc_flg = 1; - DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", - dev->name); - } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) { - /* Remove the NIC from promiscuous mode */ - add = &bar0->mac_cfg; - val64 = readq(&bar0->mac_cfg); - val64 &= ~MAC_CFG_RMAC_PROM_ENABLE; - - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32)val64, add); - writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); - writel((u32) (val64 >> 32), (add + 4)); - - if (vlan_tag_strip != 0) { - val64 = readq(&bar0->rx_pa_cfg); - val64 |= RX_PA_CFG_STRIP_VLAN_TAG; - writeq(val64, &bar0->rx_pa_cfg); - sp->vlan_strip_flag = 1; - } - - val64 = readq(&bar0->mac_cfg); - sp->promisc_flg = 0; - DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); - } - - /* Update individual M_CAST address list */ - if ((!sp->m_cast_flg) && netdev_mc_count(dev)) { - if (netdev_mc_count(dev) > - (config->max_mc_addr - config->max_mac_addr)) { - DBG_PRINT(ERR_DBG, - "%s: No more Rx filters can be added - " - "please enable ALL_MULTI instead\n", - dev->name); - return; - } - - prev_cnt = sp->mc_addr_count; - sp->mc_addr_count = netdev_mc_count(dev); - - /* Clear out the previous list of Mc in the H/W. */ - for (i = 0; i < prev_cnt; i++) { - writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), - &bar0->rmac_addr_data0_mem); - writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); - val64 = RMAC_ADDR_CMD_MEM_WE | - RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET - (config->mc_start_offset + i); - writeq(val64, &bar0->rmac_addr_cmd_mem); - - /* Wait for command completes */ - if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET)) { - DBG_PRINT(ERR_DBG, - "%s: Adding Multicasts failed\n", - dev->name); - return; - } - } - - /* Create the new Rx filter list and update the same in H/W. */ - i = 0; - netdev_for_each_mc_addr(ha, dev) { - mac_addr = 0; - for (j = 0; j < ETH_ALEN; j++) { - mac_addr |= ha->addr[j]; - mac_addr <<= 8; - } - mac_addr >>= 8; - writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr), - &bar0->rmac_addr_data0_mem); - writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); - val64 = RMAC_ADDR_CMD_MEM_WE | - RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET - (i + config->mc_start_offset); - writeq(val64, &bar0->rmac_addr_cmd_mem); - - /* Wait for command completes */ - if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET)) { - DBG_PRINT(ERR_DBG, - "%s: Adding Multicasts failed\n", - dev->name); - return; - } - i++; - } - } -} - -/* read from CAM unicast & multicast addresses and store it in - * def_mac_addr structure - */ -static void do_s2io_store_unicast_mc(struct s2io_nic *sp) -{ - int offset; - u64 mac_addr = 0x0; - struct config_param *config = &sp->config; - - /* store unicast & multicast mac addresses */ - for (offset = 0; offset < config->max_mc_addr; offset++) { - mac_addr = do_s2io_read_unicast_mc(sp, offset); - /* if read fails disable the entry */ - if (mac_addr == FAILURE) - mac_addr = S2IO_DISABLE_MAC_ENTRY; - do_s2io_copy_mac_addr(sp, offset, mac_addr); - } -} - -/* restore unicast & multicast MAC to CAM from def_mac_addr structure */ -static void do_s2io_restore_unicast_mc(struct s2io_nic *sp) -{ - int offset; - struct config_param *config = &sp->config; - /* restore unicast mac address */ - for (offset = 0; offset < config->max_mac_addr; offset++) - do_s2io_prog_unicast(sp->dev, - sp->def_mac_addr[offset].mac_addr); - - /* restore multicast mac address */ - for (offset = config->mc_start_offset; - offset < config->max_mc_addr; offset++) - do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr); -} - -/* add a multicast MAC address to CAM */ -static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr) -{ - int i; - u64 mac_addr = 0; - struct config_param *config = &sp->config; - - for (i = 0; i < ETH_ALEN; i++) { - mac_addr <<= 8; - mac_addr |= addr[i]; - } - if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY)) - return SUCCESS; - - /* check if the multicast mac already preset in CAM */ - for (i = config->mc_start_offset; i < config->max_mc_addr; i++) { - u64 tmp64; - tmp64 = do_s2io_read_unicast_mc(sp, i); - if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */ - break; - - if (tmp64 == mac_addr) - return SUCCESS; - } - if (i == config->max_mc_addr) { - DBG_PRINT(ERR_DBG, - "CAM full no space left for multicast MAC\n"); - return FAILURE; - } - /* Update the internal structure with this new mac address */ - do_s2io_copy_mac_addr(sp, i, mac_addr); - - return do_s2io_add_mac(sp, mac_addr, i); -} - -/* add MAC address to CAM */ -static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off) -{ - u64 val64; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr), - &bar0->rmac_addr_data0_mem); - - val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET(off); - writeq(val64, &bar0->rmac_addr_cmd_mem); - - /* Wait till command completes */ - if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET)) { - DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n"); - return FAILURE; - } - return SUCCESS; -} -/* deletes a specified unicast/multicast mac entry from CAM */ -static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr) -{ - int offset; - u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64; - struct config_param *config = &sp->config; - - for (offset = 1; - offset < config->max_mc_addr; offset++) { - tmp64 = do_s2io_read_unicast_mc(sp, offset); - if (tmp64 == addr) { - /* disable the entry by writing 0xffffffffffffULL */ - if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE) - return FAILURE; - /* store the new mac list from CAM */ - do_s2io_store_unicast_mc(sp); - return SUCCESS; - } - } - DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n", - (unsigned long long)addr); - return FAILURE; -} - -/* read mac entries from CAM */ -static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset) -{ - u64 tmp64 = 0xffffffffffff0000ULL, val64; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - /* read mac addr */ - val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET(offset); - writeq(val64, &bar0->rmac_addr_cmd_mem); - - /* Wait till command completes */ - if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET)) { - DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n"); - return FAILURE; - } - tmp64 = readq(&bar0->rmac_addr_data0_mem); - - return tmp64 >> 16; -} - -/** - * s2io_set_mac_addr driver entry point - */ - -static int s2io_set_mac_addr(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EINVAL; - - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - - /* store the MAC address in CAM */ - return do_s2io_prog_unicast(dev, dev->dev_addr); -} -/** - * do_s2io_prog_unicast - Programs the Xframe mac address - * @dev : pointer to the device structure. - * @addr: a uchar pointer to the new mac address which is to be set. - * Description : This procedure will program the Xframe to receive - * frames with new Mac Address - * Return value: SUCCESS on success and an appropriate (-)ve integer - * as defined in errno.h file on failure. - */ - -static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr) -{ - struct s2io_nic *sp = netdev_priv(dev); - register u64 mac_addr = 0, perm_addr = 0; - int i; - u64 tmp64; - struct config_param *config = &sp->config; - - /* - * Set the new MAC address as the new unicast filter and reflect this - * change on the device address registered with the OS. It will be - * at offset 0. - */ - for (i = 0; i < ETH_ALEN; i++) { - mac_addr <<= 8; - mac_addr |= addr[i]; - perm_addr <<= 8; - perm_addr |= sp->def_mac_addr[0].mac_addr[i]; - } - - /* check if the dev_addr is different than perm_addr */ - if (mac_addr == perm_addr) - return SUCCESS; - - /* check if the mac already preset in CAM */ - for (i = 1; i < config->max_mac_addr; i++) { - tmp64 = do_s2io_read_unicast_mc(sp, i); - if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */ - break; - - if (tmp64 == mac_addr) { - DBG_PRINT(INFO_DBG, - "MAC addr:0x%llx already present in CAM\n", - (unsigned long long)mac_addr); - return SUCCESS; - } - } - if (i == config->max_mac_addr) { - DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n"); - return FAILURE; - } - /* Update the internal structure with this new mac address */ - do_s2io_copy_mac_addr(sp, i, mac_addr); - - return do_s2io_add_mac(sp, mac_addr, i); -} - -/** - * s2io_ethtool_sset - Sets different link parameters. - * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @info: pointer to the structure with parameters given by ethtool to set - * link information. - * Description: - * The function sets different link parameters provided by the user onto - * the NIC. - * Return value: - * 0 on success. - */ - -static int s2io_ethtool_sset(struct net_device *dev, - struct ethtool_cmd *info) -{ - struct s2io_nic *sp = netdev_priv(dev); - if ((info->autoneg == AUTONEG_ENABLE) || - (ethtool_cmd_speed(info) != SPEED_10000) || - (info->duplex != DUPLEX_FULL)) - return -EINVAL; - else { - s2io_close(sp->dev); - s2io_open(sp->dev); - } - - return 0; -} - -/** - * s2io_ethtol_gset - Return link specific information. - * @sp : private member of the device structure, pointer to the - * s2io_nic structure. - * @info : pointer to the structure with parameters given by ethtool - * to return link information. - * Description: - * Returns link specific information like speed, duplex etc.. to ethtool. - * Return value : - * return 0 on success. - */ - -static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info) -{ - struct s2io_nic *sp = netdev_priv(dev); - info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); - info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); - info->port = PORT_FIBRE; - - /* info->transceiver */ - info->transceiver = XCVR_EXTERNAL; - - if (netif_carrier_ok(sp->dev)) { - ethtool_cmd_speed_set(info, SPEED_10000); - info->duplex = DUPLEX_FULL; - } else { - ethtool_cmd_speed_set(info, -1); - info->duplex = -1; - } - - info->autoneg = AUTONEG_DISABLE; - return 0; -} - -/** - * s2io_ethtool_gdrvinfo - Returns driver specific information. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @info : pointer to the structure with parameters given by ethtool to - * return driver information. - * Description: - * Returns driver specefic information like name, version etc.. to ethtool. - * Return value: - * void - */ - -static void s2io_ethtool_gdrvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct s2io_nic *sp = netdev_priv(dev); - - strncpy(info->driver, s2io_driver_name, sizeof(info->driver)); - strncpy(info->version, s2io_driver_version, sizeof(info->version)); - strncpy(info->fw_version, "", sizeof(info->fw_version)); - strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info)); - info->regdump_len = XENA_REG_SPACE; - info->eedump_len = XENA_EEPROM_SPACE; -} - -/** - * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer. - * @sp: private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @regs : pointer to the structure with parameters given by ethtool for - * dumping the registers. - * @reg_space: The input argumnet into which all the registers are dumped. - * Description: - * Dumps the entire register space of xFrame NIC into the user given - * buffer area. - * Return value : - * void . - */ - -static void s2io_ethtool_gregs(struct net_device *dev, - struct ethtool_regs *regs, void *space) -{ - int i; - u64 reg; - u8 *reg_space = (u8 *)space; - struct s2io_nic *sp = netdev_priv(dev); - - regs->len = XENA_REG_SPACE; - regs->version = sp->pdev->subsystem_device; - - for (i = 0; i < regs->len; i += 8) { - reg = readq(sp->bar0 + i); - memcpy((reg_space + i), ®, 8); - } -} - -/* - * s2io_set_led - control NIC led - */ -static void s2io_set_led(struct s2io_nic *sp, bool on) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u16 subid = sp->pdev->subsystem_device; - u64 val64; - - if ((sp->device_type == XFRAME_II_DEVICE) || - ((subid & 0xFF) >= 0x07)) { - val64 = readq(&bar0->gpio_control); - if (on) - val64 |= GPIO_CTRL_GPIO_0; - else - val64 &= ~GPIO_CTRL_GPIO_0; - - writeq(val64, &bar0->gpio_control); - } else { - val64 = readq(&bar0->adapter_control); - if (on) - val64 |= ADAPTER_LED_ON; - else - val64 &= ~ADAPTER_LED_ON; - - writeq(val64, &bar0->adapter_control); - } - -} - -/** - * s2io_ethtool_set_led - To physically identify the nic on the system. - * @dev : network device - * @state: led setting - * - * Description: Used to physically identify the NIC on the system. - * The Link LED will blink for a time specified by the user for - * identification. - * NOTE: The Link has to be Up to be able to blink the LED. Hence - * identification is possible only if it's link is up. - */ - -static int s2io_ethtool_set_led(struct net_device *dev, - enum ethtool_phys_id_state state) -{ - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u16 subid = sp->pdev->subsystem_device; - - if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) { - u64 val64 = readq(&bar0->adapter_control); - if (!(val64 & ADAPTER_CNTL_EN)) { - pr_err("Adapter Link down, cannot blink LED\n"); - return -EAGAIN; - } - } - - switch (state) { - case ETHTOOL_ID_ACTIVE: - sp->adapt_ctrl_org = readq(&bar0->gpio_control); - return 1; /* cycle on/off once per second */ - - case ETHTOOL_ID_ON: - s2io_set_led(sp, true); - break; - - case ETHTOOL_ID_OFF: - s2io_set_led(sp, false); - break; - - case ETHTOOL_ID_INACTIVE: - if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) - writeq(sp->adapt_ctrl_org, &bar0->gpio_control); - } - - return 0; -} - -static void s2io_ethtool_gringparam(struct net_device *dev, - struct ethtool_ringparam *ering) -{ - struct s2io_nic *sp = netdev_priv(dev); - int i, tx_desc_count = 0, rx_desc_count = 0; - - if (sp->rxd_mode == RXD_MODE_1) { - ering->rx_max_pending = MAX_RX_DESC_1; - ering->rx_jumbo_max_pending = MAX_RX_DESC_1; - } else { - ering->rx_max_pending = MAX_RX_DESC_2; - ering->rx_jumbo_max_pending = MAX_RX_DESC_2; - } - - ering->rx_mini_max_pending = 0; - ering->tx_max_pending = MAX_TX_DESC; - - for (i = 0; i < sp->config.rx_ring_num; i++) - rx_desc_count += sp->config.rx_cfg[i].num_rxd; - ering->rx_pending = rx_desc_count; - ering->rx_jumbo_pending = rx_desc_count; - ering->rx_mini_pending = 0; - - for (i = 0; i < sp->config.tx_fifo_num; i++) - tx_desc_count += sp->config.tx_cfg[i].fifo_len; - ering->tx_pending = tx_desc_count; - DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds); -} - -/** - * s2io_ethtool_getpause_data -Pause frame frame generation and reception. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @ep : pointer to the structure with pause parameters given by ethtool. - * Description: - * Returns the Pause frame generation and reception capability of the NIC. - * Return value: - * void - */ -static void s2io_ethtool_getpause_data(struct net_device *dev, - struct ethtool_pauseparam *ep) -{ - u64 val64; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - val64 = readq(&bar0->rmac_pause_cfg); - if (val64 & RMAC_PAUSE_GEN_ENABLE) - ep->tx_pause = true; - if (val64 & RMAC_PAUSE_RX_ENABLE) - ep->rx_pause = true; - ep->autoneg = false; -} - -/** - * s2io_ethtool_setpause_data - set/reset pause frame generation. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @ep : pointer to the structure with pause parameters given by ethtool. - * Description: - * It can be used to set or reset Pause frame generation or reception - * support of the NIC. - * Return value: - * int, returns 0 on Success - */ - -static int s2io_ethtool_setpause_data(struct net_device *dev, - struct ethtool_pauseparam *ep) -{ - u64 val64; - struct s2io_nic *sp = netdev_priv(dev); - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - val64 = readq(&bar0->rmac_pause_cfg); - if (ep->tx_pause) - val64 |= RMAC_PAUSE_GEN_ENABLE; - else - val64 &= ~RMAC_PAUSE_GEN_ENABLE; - if (ep->rx_pause) - val64 |= RMAC_PAUSE_RX_ENABLE; - else - val64 &= ~RMAC_PAUSE_RX_ENABLE; - writeq(val64, &bar0->rmac_pause_cfg); - return 0; -} - -/** - * read_eeprom - reads 4 bytes of data from user given offset. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @off : offset at which the data must be written - * @data : Its an output parameter where the data read at the given - * offset is stored. - * Description: - * Will read 4 bytes of data from the user given offset and return the - * read data. - * NOTE: Will allow to read only part of the EEPROM visible through the - * I2C bus. - * Return value: - * -1 on failure and 0 on success. - */ - -#define S2IO_DEV_ID 5 -static int read_eeprom(struct s2io_nic *sp, int off, u64 *data) -{ - int ret = -1; - u32 exit_cnt = 0; - u64 val64; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - if (sp->device_type == XFRAME_I_DEVICE) { - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | - I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(0x3) | - I2C_CONTROL_READ | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); - - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - *data = I2C_CONTROL_GET_DATA(val64); - ret = 0; - break; - } - msleep(50); - exit_cnt++; - } - } - - if (sp->device_type == XFRAME_II_DEVICE) { - val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | - SPI_CONTROL_BYTECNT(0x3) | - SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off); - SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); - val64 |= SPI_CONTROL_REQ; - SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); - while (exit_cnt < 5) { - val64 = readq(&bar0->spi_control); - if (val64 & SPI_CONTROL_NACK) { - ret = 1; - break; - } else if (val64 & SPI_CONTROL_DONE) { - *data = readq(&bar0->spi_data); - *data &= 0xffffff; - ret = 0; - break; - } - msleep(50); - exit_cnt++; - } - } - return ret; -} - -/** - * write_eeprom - actually writes the relevant part of the data value. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @off : offset at which the data must be written - * @data : The data that is to be written - * @cnt : Number of bytes of the data that are actually to be written into - * the Eeprom. (max of 3) - * Description: - * Actually writes the relevant part of the data value into the Eeprom - * through the I2C bus. - * Return value: - * 0 on success, -1 on failure. - */ - -static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt) -{ - int exit_cnt = 0, ret = -1; - u64 val64; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - - if (sp->device_type == XFRAME_I_DEVICE) { - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | - I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(cnt) | - I2C_CONTROL_SET_DATA((u32)data) | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); - - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - if (!(val64 & I2C_CONTROL_NACK)) - ret = 0; - break; - } - msleep(50); - exit_cnt++; - } - } - - if (sp->device_type == XFRAME_II_DEVICE) { - int write_cnt = (cnt == 8) ? 0 : cnt; - writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data); - - val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | - SPI_CONTROL_BYTECNT(write_cnt) | - SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off); - SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); - val64 |= SPI_CONTROL_REQ; - SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); - while (exit_cnt < 5) { - val64 = readq(&bar0->spi_control); - if (val64 & SPI_CONTROL_NACK) { - ret = 1; - break; - } else if (val64 & SPI_CONTROL_DONE) { - ret = 0; - break; - } - msleep(50); - exit_cnt++; - } - } - return ret; -} -static void s2io_vpd_read(struct s2io_nic *nic) -{ - u8 *vpd_data; - u8 data; - int i = 0, cnt, len, fail = 0; - int vpd_addr = 0x80; - struct swStat *swstats = &nic->mac_control.stats_info->sw_stat; - - if (nic->device_type == XFRAME_II_DEVICE) { - strcpy(nic->product_name, "Xframe II 10GbE network adapter"); - vpd_addr = 0x80; - } else { - strcpy(nic->product_name, "Xframe I 10GbE network adapter"); - vpd_addr = 0x50; - } - strcpy(nic->serial_num, "NOT AVAILABLE"); - - vpd_data = kmalloc(256, GFP_KERNEL); - if (!vpd_data) { - swstats->mem_alloc_fail_cnt++; - return; - } - swstats->mem_allocated += 256; - - for (i = 0; i < 256; i += 4) { - pci_write_config_byte(nic->pdev, (vpd_addr + 2), i); - pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data); - pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0); - for (cnt = 0; cnt < 5; cnt++) { - msleep(2); - pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data); - if (data == 0x80) - break; - } - if (cnt >= 5) { - DBG_PRINT(ERR_DBG, "Read of VPD data failed\n"); - fail = 1; - break; - } - pci_read_config_dword(nic->pdev, (vpd_addr + 4), - (u32 *)&vpd_data[i]); - } - - if (!fail) { - /* read serial number of adapter */ - for (cnt = 0; cnt < 252; cnt++) { - if ((vpd_data[cnt] == 'S') && - (vpd_data[cnt+1] == 'N')) { - len = vpd_data[cnt+2]; - if (len < min(VPD_STRING_LEN, 256-cnt-2)) { - memcpy(nic->serial_num, - &vpd_data[cnt + 3], - len); - memset(nic->serial_num+len, - 0, - VPD_STRING_LEN-len); - break; - } - } - } - } - - if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) { - len = vpd_data[1]; - memcpy(nic->product_name, &vpd_data[3], len); - nic->product_name[len] = 0; - } - kfree(vpd_data); - swstats->mem_freed += 256; -} - -/** - * s2io_ethtool_geeprom - reads the value stored in the Eeprom. - * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, - * containing all relevant information. - * @data_buf : user defined value to be written into Eeprom. - * Description: Reads the values stored in the Eeprom at given offset - * for a given length. Stores these values int the input argument data - * buffer 'data_buf' and returns these to the caller (ethtool.) - * Return value: - * int 0 on success - */ - -static int s2io_ethtool_geeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 * data_buf) -{ - u32 i, valid; - u64 data; - struct s2io_nic *sp = netdev_priv(dev); - - eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16); - - if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE)) - eeprom->len = XENA_EEPROM_SPACE - eeprom->offset; - - for (i = 0; i < eeprom->len; i += 4) { - if (read_eeprom(sp, (eeprom->offset + i), &data)) { - DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n"); - return -EFAULT; - } - valid = INV(data); - memcpy((data_buf + i), &valid, 4); - } - return 0; -} - -/** - * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, - * containing all relevant information. - * @data_buf ; user defined value to be written into Eeprom. - * Description: - * Tries to write the user provided value in the Eeprom, at the offset - * given by the user. - * Return value: - * 0 on success, -EFAULT on failure. - */ - -static int s2io_ethtool_seeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, - u8 *data_buf) -{ - int len = eeprom->len, cnt = 0; - u64 valid = 0, data; - struct s2io_nic *sp = netdev_priv(dev); - - if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) { - DBG_PRINT(ERR_DBG, - "ETHTOOL_WRITE_EEPROM Err: " - "Magic value is wrong, it is 0x%x should be 0x%x\n", - (sp->pdev->vendor | (sp->pdev->device << 16)), - eeprom->magic); - return -EFAULT; - } - - while (len) { - data = (u32)data_buf[cnt] & 0x000000FF; - if (data) - valid = (u32)(data << 24); - else - valid = data; - - if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) { - DBG_PRINT(ERR_DBG, - "ETHTOOL_WRITE_EEPROM Err: " - "Cannot write into the specified offset\n"); - return -EFAULT; - } - cnt++; - len--; - } - - return 0; -} - -/** - * s2io_register_test - reads and writes into all clock domains. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @data : variable that returns the result of each of the test conducted b - * by the driver. - * Description: - * Read and write into all clock domains. The NIC has 3 clock domains, - * see that registers in all the three regions are accessible. - * Return value: - * 0 on success. - */ - -static int s2io_register_test(struct s2io_nic *sp, uint64_t *data) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64 = 0, exp_val; - int fail = 0; - - val64 = readq(&bar0->pif_rd_swapper_fb); - if (val64 != 0x123456789abcdefULL) { - fail = 1; - DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1); - } - - val64 = readq(&bar0->rmac_pause_cfg); - if (val64 != 0xc000ffff00000000ULL) { - fail = 1; - DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2); - } - - val64 = readq(&bar0->rx_queue_cfg); - if (sp->device_type == XFRAME_II_DEVICE) - exp_val = 0x0404040404040404ULL; - else - exp_val = 0x0808080808080808ULL; - if (val64 != exp_val) { - fail = 1; - DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3); - } - - val64 = readq(&bar0->xgxs_efifo_cfg); - if (val64 != 0x000000001923141EULL) { - fail = 1; - DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4); - } - - val64 = 0x5A5A5A5A5A5A5A5AULL; - writeq(val64, &bar0->xmsi_data); - val64 = readq(&bar0->xmsi_data); - if (val64 != 0x5A5A5A5A5A5A5A5AULL) { - fail = 1; - DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1); - } - - val64 = 0xA5A5A5A5A5A5A5A5ULL; - writeq(val64, &bar0->xmsi_data); - val64 = readq(&bar0->xmsi_data); - if (val64 != 0xA5A5A5A5A5A5A5A5ULL) { - fail = 1; - DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2); - } - - *data = fail; - return fail; -} - -/** - * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @data:variable that returns the result of each of the test conducted by - * the driver. - * Description: - * Verify that EEPROM in the xena can be programmed using I2C_CONTROL - * register. - * Return value: - * 0 on success. - */ - -static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data) -{ - int fail = 0; - u64 ret_data, org_4F0, org_7F0; - u8 saved_4F0 = 0, saved_7F0 = 0; - struct net_device *dev = sp->dev; - - /* Test Write Error at offset 0 */ - /* Note that SPI interface allows write access to all areas - * of EEPROM. Hence doing all negative testing only for Xframe I. - */ - if (sp->device_type == XFRAME_I_DEVICE) - if (!write_eeprom(sp, 0, 0, 3)) - fail = 1; - - /* Save current values at offsets 0x4F0 and 0x7F0 */ - if (!read_eeprom(sp, 0x4F0, &org_4F0)) - saved_4F0 = 1; - if (!read_eeprom(sp, 0x7F0, &org_7F0)) - saved_7F0 = 1; - - /* Test Write at offset 4f0 */ - if (write_eeprom(sp, 0x4F0, 0x012345, 3)) - fail = 1; - if (read_eeprom(sp, 0x4F0, &ret_data)) - fail = 1; - - if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " - "Data written %llx Data read %llx\n", - dev->name, (unsigned long long)0x12345, - (unsigned long long)ret_data); - fail = 1; - } - - /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x4F0, 0xFFFFFF, 3); - - /* Test Write Request Error at offset 0x7c */ - if (sp->device_type == XFRAME_I_DEVICE) - if (!write_eeprom(sp, 0x07C, 0, 3)) - fail = 1; - - /* Test Write Request at offset 0x7f0 */ - if (write_eeprom(sp, 0x7F0, 0x012345, 3)) - fail = 1; - if (read_eeprom(sp, 0x7F0, &ret_data)) - fail = 1; - - if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " - "Data written %llx Data read %llx\n", - dev->name, (unsigned long long)0x12345, - (unsigned long long)ret_data); - fail = 1; - } - - /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x7F0, 0xFFFFFF, 3); - - if (sp->device_type == XFRAME_I_DEVICE) { - /* Test Write Error at offset 0x80 */ - if (!write_eeprom(sp, 0x080, 0, 3)) - fail = 1; - - /* Test Write Error at offset 0xfc */ - if (!write_eeprom(sp, 0x0FC, 0, 3)) - fail = 1; - - /* Test Write Error at offset 0x100 */ - if (!write_eeprom(sp, 0x100, 0, 3)) - fail = 1; - - /* Test Write Error at offset 4ec */ - if (!write_eeprom(sp, 0x4EC, 0, 3)) - fail = 1; - } - - /* Restore values at offsets 0x4F0 and 0x7F0 */ - if (saved_4F0) - write_eeprom(sp, 0x4F0, org_4F0, 3); - if (saved_7F0) - write_eeprom(sp, 0x7F0, org_7F0, 3); - - *data = fail; - return fail; -} - -/** - * s2io_bist_test - invokes the MemBist test of the card . - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @data:variable that returns the result of each of the test conducted by - * the driver. - * Description: - * This invokes the MemBist test of the card. We give around - * 2 secs time for the Test to complete. If it's still not complete - * within this peiod, we consider that the test failed. - * Return value: - * 0 on success and -1 on failure. - */ - -static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data) -{ - u8 bist = 0; - int cnt = 0, ret = -1; - - pci_read_config_byte(sp->pdev, PCI_BIST, &bist); - bist |= PCI_BIST_START; - pci_write_config_word(sp->pdev, PCI_BIST, bist); - - while (cnt < 20) { - pci_read_config_byte(sp->pdev, PCI_BIST, &bist); - if (!(bist & PCI_BIST_START)) { - *data = (bist & PCI_BIST_CODE_MASK); - ret = 0; - break; - } - msleep(100); - cnt++; - } - - return ret; -} - -/** - * s2io-link_test - verifies the link state of the nic - * @sp ; private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @data: variable that returns the result of each of the test conducted by - * the driver. - * Description: - * The function verifies the link state of the NIC and updates the input - * argument 'data' appropriately. - * Return value: - * 0 on success. - */ - -static int s2io_link_test(struct s2io_nic *sp, uint64_t *data) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64; - - val64 = readq(&bar0->adapter_status); - if (!(LINK_IS_UP(val64))) - *data = 1; - else - *data = 0; - - return *data; -} - -/** - * s2io_rldram_test - offline test for access to the RldRam chip on the NIC - * @sp - private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @data - variable that returns the result of each of the test - * conducted by the driver. - * Description: - * This is one of the offline test that tests the read and write - * access to the RldRam chip on the NIC. - * Return value: - * 0 on success. - */ - -static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data) -{ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64; - int cnt, iteration = 0, test_fail = 0; - - val64 = readq(&bar0->adapter_control); - val64 &= ~ADAPTER_ECC_EN; - writeq(val64, &bar0->adapter_control); - - val64 = readq(&bar0->mc_rldram_test_ctrl); - val64 |= MC_RLDRAM_TEST_MODE; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); - - val64 = readq(&bar0->mc_rldram_mrs); - val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); - - val64 |= MC_RLDRAM_MRS_ENABLE; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); - - while (iteration < 2) { - val64 = 0x55555555aaaa0000ULL; - if (iteration == 1) - val64 ^= 0xFFFFFFFFFFFF0000ULL; - writeq(val64, &bar0->mc_rldram_test_d0); - - val64 = 0xaaaa5a5555550000ULL; - if (iteration == 1) - val64 ^= 0xFFFFFFFFFFFF0000ULL; - writeq(val64, &bar0->mc_rldram_test_d1); - - val64 = 0x55aaaaaaaa5a0000ULL; - if (iteration == 1) - val64 ^= 0xFFFFFFFFFFFF0000ULL; - writeq(val64, &bar0->mc_rldram_test_d2); - - val64 = (u64) (0x0000003ffffe0100ULL); - writeq(val64, &bar0->mc_rldram_test_add); - - val64 = MC_RLDRAM_TEST_MODE | - MC_RLDRAM_TEST_WRITE | - MC_RLDRAM_TEST_GO; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); - - for (cnt = 0; cnt < 5; cnt++) { - val64 = readq(&bar0->mc_rldram_test_ctrl); - if (val64 & MC_RLDRAM_TEST_DONE) - break; - msleep(200); - } - - if (cnt == 5) - break; - - val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; - SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); - - for (cnt = 0; cnt < 5; cnt++) { - val64 = readq(&bar0->mc_rldram_test_ctrl); - if (val64 & MC_RLDRAM_TEST_DONE) - break; - msleep(500); - } - - if (cnt == 5) - break; - - val64 = readq(&bar0->mc_rldram_test_ctrl); - if (!(val64 & MC_RLDRAM_TEST_PASS)) - test_fail = 1; - - iteration++; - } - - *data = test_fail; - - /* Bring the adapter out of test mode */ - SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF); - - return test_fail; -} - -/** - * s2io_ethtool_test - conducts 6 tsets to determine the health of card. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @ethtest : pointer to a ethtool command specific structure that will be - * returned to the user. - * @data : variable that returns the result of each of the test - * conducted by the driver. - * Description: - * This function conducts 6 tests ( 4 offline and 2 online) to determine - * the health of the card. - * Return value: - * void - */ - -static void s2io_ethtool_test(struct net_device *dev, - struct ethtool_test *ethtest, - uint64_t *data) -{ - struct s2io_nic *sp = netdev_priv(dev); - int orig_state = netif_running(sp->dev); - - if (ethtest->flags == ETH_TEST_FL_OFFLINE) { - /* Offline Tests. */ - if (orig_state) - s2io_close(sp->dev); - - if (s2io_register_test(sp, &data[0])) - ethtest->flags |= ETH_TEST_FL_FAILED; - - s2io_reset(sp); - - if (s2io_rldram_test(sp, &data[3])) - ethtest->flags |= ETH_TEST_FL_FAILED; - - s2io_reset(sp); - - if (s2io_eeprom_test(sp, &data[1])) - ethtest->flags |= ETH_TEST_FL_FAILED; - - if (s2io_bist_test(sp, &data[4])) - ethtest->flags |= ETH_TEST_FL_FAILED; - - if (orig_state) - s2io_open(sp->dev); - - data[2] = 0; - } else { - /* Online Tests. */ - if (!orig_state) { - DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n", - dev->name); - data[0] = -1; - data[1] = -1; - data[2] = -1; - data[3] = -1; - data[4] = -1; - } - - if (s2io_link_test(sp, &data[2])) - ethtest->flags |= ETH_TEST_FL_FAILED; - - data[0] = 0; - data[1] = 0; - data[3] = 0; - data[4] = 0; - } -} - -static void s2io_get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *estats, - u64 *tmp_stats) -{ - int i = 0, k; - struct s2io_nic *sp = netdev_priv(dev); - struct stat_block *stats = sp->mac_control.stats_info; - struct swStat *swstats = &stats->sw_stat; - struct xpakStat *xstats = &stats->xpak_stat; - - s2io_updt_stats(sp); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 | - le32_to_cpu(stats->tmac_data_octets); - tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_mcst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_bcst_frms); - tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 | - le32_to_cpu(stats->tmac_ttl_octets); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_ucst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_nucst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 | - le32_to_cpu(stats->tmac_any_err_frms); - tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets); - tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 | - le32_to_cpu(stats->tmac_vld_ip); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 | - le32_to_cpu(stats->tmac_drop_ip); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 | - le32_to_cpu(stats->tmac_icmp); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 | - le32_to_cpu(stats->tmac_rst_tcp); - tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp); - tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 | - le32_to_cpu(stats->tmac_udp); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_vld_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 | - le32_to_cpu(stats->rmac_data_octets); - tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_vld_mcst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_vld_bcst_frms); - tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms); - tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 | - le32_to_cpu(stats->rmac_ttl_octets); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32 - | le32_to_cpu(stats->rmac_accepted_ucst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow) - << 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_discarded_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_drop_events_oflow) - << 32 | le32_to_cpu(stats->rmac_drop_events); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_usized_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_osized_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_frag_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 | - le32_to_cpu(stats->rmac_jabber_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 | - le32_to_cpu(stats->rmac_ip); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets); - tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 | - le32_to_cpu(stats->rmac_drop_ip); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 | - le32_to_cpu(stats->rmac_icmp); - tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 | - le32_to_cpu(stats->rmac_udp); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 | - le32_to_cpu(stats->rmac_err_drp_udp); - tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6); - tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6); - tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 | - le32_to_cpu(stats->rmac_pause_cnt); - tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt); - tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt); - tmp_stats[i++] = - (u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 | - le32_to_cpu(stats->rmac_accepted_ip); - tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp); - tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt); - tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt); - tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt); - tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt); - tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt); - tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt); - tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt); - tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt); - tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt); - tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt); - tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt); - tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt); - tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt); - tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt); - tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt); - tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt); - tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt); - tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt); - - /* Enhanced statistics exist only for Hercules */ - if (sp->device_type == XFRAME_II_DEVICE) { - tmp_stats[i++] = - le64_to_cpu(stats->rmac_ttl_1519_4095_frms); - tmp_stats[i++] = - le64_to_cpu(stats->rmac_ttl_4096_8191_frms); - tmp_stats[i++] = - le64_to_cpu(stats->rmac_ttl_8192_max_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms); - tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms); - tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard); - tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard); - tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt); - } - - tmp_stats[i++] = 0; - tmp_stats[i++] = swstats->single_ecc_errs; - tmp_stats[i++] = swstats->double_ecc_errs; - tmp_stats[i++] = swstats->parity_err_cnt; - tmp_stats[i++] = swstats->serious_err_cnt; - tmp_stats[i++] = swstats->soft_reset_cnt; - tmp_stats[i++] = swstats->fifo_full_cnt; - for (k = 0; k < MAX_RX_RINGS; k++) - tmp_stats[i++] = swstats->ring_full_cnt[k]; - tmp_stats[i++] = xstats->alarm_transceiver_temp_high; - tmp_stats[i++] = xstats->alarm_transceiver_temp_low; - tmp_stats[i++] = xstats->alarm_laser_bias_current_high; - tmp_stats[i++] = xstats->alarm_laser_bias_current_low; - tmp_stats[i++] = xstats->alarm_laser_output_power_high; - tmp_stats[i++] = xstats->alarm_laser_output_power_low; - tmp_stats[i++] = xstats->warn_transceiver_temp_high; - tmp_stats[i++] = xstats->warn_transceiver_temp_low; - tmp_stats[i++] = xstats->warn_laser_bias_current_high; - tmp_stats[i++] = xstats->warn_laser_bias_current_low; - tmp_stats[i++] = xstats->warn_laser_output_power_high; - tmp_stats[i++] = xstats->warn_laser_output_power_low; - tmp_stats[i++] = swstats->clubbed_frms_cnt; - tmp_stats[i++] = swstats->sending_both; - tmp_stats[i++] = swstats->outof_sequence_pkts; - tmp_stats[i++] = swstats->flush_max_pkts; - if (swstats->num_aggregations) { - u64 tmp = swstats->sum_avg_pkts_aggregated; - int count = 0; - /* - * Since 64-bit divide does not work on all platforms, - * do repeated subtraction. - */ - while (tmp >= swstats->num_aggregations) { - tmp -= swstats->num_aggregations; - count++; - } - tmp_stats[i++] = count; - } else - tmp_stats[i++] = 0; - tmp_stats[i++] = swstats->mem_alloc_fail_cnt; - tmp_stats[i++] = swstats->pci_map_fail_cnt; - tmp_stats[i++] = swstats->watchdog_timer_cnt; - tmp_stats[i++] = swstats->mem_allocated; - tmp_stats[i++] = swstats->mem_freed; - tmp_stats[i++] = swstats->link_up_cnt; - tmp_stats[i++] = swstats->link_down_cnt; - tmp_stats[i++] = swstats->link_up_time; - tmp_stats[i++] = swstats->link_down_time; - - tmp_stats[i++] = swstats->tx_buf_abort_cnt; - tmp_stats[i++] = swstats->tx_desc_abort_cnt; - tmp_stats[i++] = swstats->tx_parity_err_cnt; - tmp_stats[i++] = swstats->tx_link_loss_cnt; - tmp_stats[i++] = swstats->tx_list_proc_err_cnt; - - tmp_stats[i++] = swstats->rx_parity_err_cnt; - tmp_stats[i++] = swstats->rx_abort_cnt; - tmp_stats[i++] = swstats->rx_parity_abort_cnt; - tmp_stats[i++] = swstats->rx_rda_fail_cnt; - tmp_stats[i++] = swstats->rx_unkn_prot_cnt; - tmp_stats[i++] = swstats->rx_fcs_err_cnt; - tmp_stats[i++] = swstats->rx_buf_size_err_cnt; - tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt; - tmp_stats[i++] = swstats->rx_unkn_err_cnt; - tmp_stats[i++] = swstats->tda_err_cnt; - tmp_stats[i++] = swstats->pfc_err_cnt; - tmp_stats[i++] = swstats->pcc_err_cnt; - tmp_stats[i++] = swstats->tti_err_cnt; - tmp_stats[i++] = swstats->tpa_err_cnt; - tmp_stats[i++] = swstats->sm_err_cnt; - tmp_stats[i++] = swstats->lso_err_cnt; - tmp_stats[i++] = swstats->mac_tmac_err_cnt; - tmp_stats[i++] = swstats->mac_rmac_err_cnt; - tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt; - tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt; - tmp_stats[i++] = swstats->rc_err_cnt; - tmp_stats[i++] = swstats->prc_pcix_err_cnt; - tmp_stats[i++] = swstats->rpa_err_cnt; - tmp_stats[i++] = swstats->rda_err_cnt; - tmp_stats[i++] = swstats->rti_err_cnt; - tmp_stats[i++] = swstats->mc_err_cnt; -} - -static int s2io_ethtool_get_regs_len(struct net_device *dev) -{ - return XENA_REG_SPACE; -} - - -static int s2io_get_eeprom_len(struct net_device *dev) -{ - return XENA_EEPROM_SPACE; -} - -static int s2io_get_sset_count(struct net_device *dev, int sset) -{ - struct s2io_nic *sp = netdev_priv(dev); - - switch (sset) { - case ETH_SS_TEST: - return S2IO_TEST_LEN; - case ETH_SS_STATS: - switch (sp->device_type) { - case XFRAME_I_DEVICE: - return XFRAME_I_STAT_LEN; - case XFRAME_II_DEVICE: - return XFRAME_II_STAT_LEN; - default: - return 0; - } - default: - return -EOPNOTSUPP; - } -} - -static void s2io_ethtool_get_strings(struct net_device *dev, - u32 stringset, u8 *data) -{ - int stat_size = 0; - struct s2io_nic *sp = netdev_priv(dev); - - switch (stringset) { - case ETH_SS_TEST: - memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN); - break; - case ETH_SS_STATS: - stat_size = sizeof(ethtool_xena_stats_keys); - memcpy(data, ðtool_xena_stats_keys, stat_size); - if (sp->device_type == XFRAME_II_DEVICE) { - memcpy(data + stat_size, - ðtool_enhanced_stats_keys, - sizeof(ethtool_enhanced_stats_keys)); - stat_size += sizeof(ethtool_enhanced_stats_keys); - } - - memcpy(data + stat_size, ðtool_driver_stats_keys, - sizeof(ethtool_driver_stats_keys)); - } -} - -static int s2io_set_features(struct net_device *dev, u32 features) -{ - struct s2io_nic *sp = netdev_priv(dev); - u32 changed = (features ^ dev->features) & NETIF_F_LRO; - - if (changed && netif_running(dev)) { - int rc; - - s2io_stop_all_tx_queue(sp); - s2io_card_down(sp); - dev->features = features; - rc = s2io_card_up(sp); - if (rc) - s2io_reset(sp); - else - s2io_start_all_tx_queue(sp); - - return rc ? rc : 1; - } - - return 0; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_settings = s2io_ethtool_gset, - .set_settings = s2io_ethtool_sset, - .get_drvinfo = s2io_ethtool_gdrvinfo, - .get_regs_len = s2io_ethtool_get_regs_len, - .get_regs = s2io_ethtool_gregs, - .get_link = ethtool_op_get_link, - .get_eeprom_len = s2io_get_eeprom_len, - .get_eeprom = s2io_ethtool_geeprom, - .set_eeprom = s2io_ethtool_seeprom, - .get_ringparam = s2io_ethtool_gringparam, - .get_pauseparam = s2io_ethtool_getpause_data, - .set_pauseparam = s2io_ethtool_setpause_data, - .self_test = s2io_ethtool_test, - .get_strings = s2io_ethtool_get_strings, - .set_phys_id = s2io_ethtool_set_led, - .get_ethtool_stats = s2io_get_ethtool_stats, - .get_sset_count = s2io_get_sset_count, -}; - -/** - * s2io_ioctl - Entry point for the Ioctl - * @dev : Device pointer. - * @ifr : An IOCTL specefic structure, that can contain a pointer to - * a proprietary structure used to pass information to the driver. - * @cmd : This is used to distinguish between the different commands that - * can be passed to the IOCTL functions. - * Description: - * Currently there are no special functionality supported in IOCTL, hence - * function always return EOPNOTSUPPORTED - */ - -static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - return -EOPNOTSUPP; -} - -/** - * s2io_change_mtu - entry point to change MTU size for the device. - * @dev : device pointer. - * @new_mtu : the new MTU size for the device. - * Description: A driver entry point to change MTU size for the device. - * Before changing the MTU the device must be stopped. - * Return value: - * 0 on success and an appropriate (-)ve integer as defined in errno.h - * file on failure. - */ - -static int s2io_change_mtu(struct net_device *dev, int new_mtu) -{ - struct s2io_nic *sp = netdev_priv(dev); - int ret = 0; - - if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) { - DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name); - return -EPERM; - } - - dev->mtu = new_mtu; - if (netif_running(dev)) { - s2io_stop_all_tx_queue(sp); - s2io_card_down(sp); - ret = s2io_card_up(sp); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", - __func__); - return ret; - } - s2io_wake_all_tx_queue(sp); - } else { /* Device is down */ - struct XENA_dev_config __iomem *bar0 = sp->bar0; - u64 val64 = new_mtu; - - writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - } - - return ret; -} - -/** - * s2io_set_link - Set the LInk status - * @data: long pointer to device private structue - * Description: Sets the link status for the adapter - */ - -static void s2io_set_link(struct work_struct *work) -{ - struct s2io_nic *nic = container_of(work, struct s2io_nic, - set_link_task); - struct net_device *dev = nic->dev; - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64; - u16 subid; - - rtnl_lock(); - - if (!netif_running(dev)) - goto out_unlock; - - if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) { - /* The card is being reset, no point doing anything */ - goto out_unlock; - } - - subid = nic->pdev->subsystem_device; - if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { - /* - * Allow a small delay for the NICs self initiated - * cleanup to complete. - */ - msleep(100); - } - - val64 = readq(&bar0->adapter_status); - if (LINK_IS_UP(val64)) { - if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) { - if (verify_xena_quiescence(nic)) { - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_CNTL_EN; - writeq(val64, &bar0->adapter_control); - if (CARDS_WITH_FAULTY_LINK_INDICATORS( - nic->device_type, subid)) { - val64 = readq(&bar0->gpio_control); - val64 |= GPIO_CTRL_GPIO_0; - writeq(val64, &bar0->gpio_control); - val64 = readq(&bar0->gpio_control); - } else { - val64 |= ADAPTER_LED_ON; - writeq(val64, &bar0->adapter_control); - } - nic->device_enabled_once = true; - } else { - DBG_PRINT(ERR_DBG, - "%s: Error: device is not Quiescent\n", - dev->name); - s2io_stop_all_tx_queue(nic); - } - } - val64 = readq(&bar0->adapter_control); - val64 |= ADAPTER_LED_ON; - writeq(val64, &bar0->adapter_control); - s2io_link(nic, LINK_UP); - } else { - if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, - subid)) { - val64 = readq(&bar0->gpio_control); - val64 &= ~GPIO_CTRL_GPIO_0; - writeq(val64, &bar0->gpio_control); - val64 = readq(&bar0->gpio_control); - } - /* turn off LED */ - val64 = readq(&bar0->adapter_control); - val64 = val64 & (~ADAPTER_LED_ON); - writeq(val64, &bar0->adapter_control); - s2io_link(nic, LINK_DOWN); - } - clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state)); - -out_unlock: - rtnl_unlock(); -} - -static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp, - struct buffAdd *ba, - struct sk_buff **skb, u64 *temp0, u64 *temp1, - u64 *temp2, int size) -{ - struct net_device *dev = sp->dev; - struct swStat *stats = &sp->mac_control.stats_info->sw_stat; - - if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) { - struct RxD1 *rxdp1 = (struct RxD1 *)rxdp; - /* allocate skb */ - if (*skb) { - DBG_PRINT(INFO_DBG, "SKB is not NULL\n"); - /* - * As Rx frame are not going to be processed, - * using same mapped address for the Rxd - * buffer pointer - */ - rxdp1->Buffer0_ptr = *temp0; - } else { - *skb = dev_alloc_skb(size); - if (!(*skb)) { - DBG_PRINT(INFO_DBG, - "%s: Out of memory to allocate %s\n", - dev->name, "1 buf mode SKBs"); - stats->mem_alloc_fail_cnt++; - return -ENOMEM ; - } - stats->mem_allocated += (*skb)->truesize; - /* storing the mapped addr in a temp variable - * such it will be used for next rxd whose - * Host Control is NULL - */ - rxdp1->Buffer0_ptr = *temp0 = - pci_map_single(sp->pdev, (*skb)->data, - size - NET_IP_ALIGN, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr)) - goto memalloc_failed; - rxdp->Host_Control = (unsigned long) (*skb); - } - } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) { - struct RxD3 *rxdp3 = (struct RxD3 *)rxdp; - /* Two buffer Mode */ - if (*skb) { - rxdp3->Buffer2_ptr = *temp2; - rxdp3->Buffer0_ptr = *temp0; - rxdp3->Buffer1_ptr = *temp1; - } else { - *skb = dev_alloc_skb(size); - if (!(*skb)) { - DBG_PRINT(INFO_DBG, - "%s: Out of memory to allocate %s\n", - dev->name, - "2 buf mode SKBs"); - stats->mem_alloc_fail_cnt++; - return -ENOMEM; - } - stats->mem_allocated += (*skb)->truesize; - rxdp3->Buffer2_ptr = *temp2 = - pci_map_single(sp->pdev, (*skb)->data, - dev->mtu + 4, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr)) - goto memalloc_failed; - rxdp3->Buffer0_ptr = *temp0 = - pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(sp->pdev, - rxdp3->Buffer0_ptr)) { - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer2_ptr, - dev->mtu + 4, - PCI_DMA_FROMDEVICE); - goto memalloc_failed; - } - rxdp->Host_Control = (unsigned long) (*skb); - - /* Buffer-1 will be dummy buffer not used */ - rxdp3->Buffer1_ptr = *temp1 = - pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(sp->pdev, - rxdp3->Buffer1_ptr)) { - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer0_ptr, - BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(sp->pdev, - (dma_addr_t)rxdp3->Buffer2_ptr, - dev->mtu + 4, - PCI_DMA_FROMDEVICE); - goto memalloc_failed; - } - } - } - return 0; - -memalloc_failed: - stats->pci_map_fail_cnt++; - stats->mem_freed += (*skb)->truesize; - dev_kfree_skb(*skb); - return -ENOMEM; -} - -static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp, - int size) -{ - struct net_device *dev = sp->dev; - if (sp->rxd_mode == RXD_MODE_1) { - rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN); - } else if (sp->rxd_mode == RXD_MODE_3B) { - rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); - rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); - rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4); - } -} - -static int rxd_owner_bit_reset(struct s2io_nic *sp) -{ - int i, j, k, blk_cnt = 0, size; - struct config_param *config = &sp->config; - struct mac_info *mac_control = &sp->mac_control; - struct net_device *dev = sp->dev; - struct RxD_t *rxdp = NULL; - struct sk_buff *skb = NULL; - struct buffAdd *ba = NULL; - u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0; - - /* Calculate the size based on ring mode */ - size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + HEADER_SNAP_SIZE; - if (sp->rxd_mode == RXD_MODE_1) - size += NET_IP_ALIGN; - else if (sp->rxd_mode == RXD_MODE_3B) - size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4; - - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1); - - for (j = 0; j < blk_cnt; j++) { - for (k = 0; k < rxd_count[sp->rxd_mode]; k++) { - rxdp = ring->rx_blocks[j].rxds[k].virt_addr; - if (sp->rxd_mode == RXD_MODE_3B) - ba = &ring->ba[j][k]; - if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb, - (u64 *)&temp0_64, - (u64 *)&temp1_64, - (u64 *)&temp2_64, - size) == -ENOMEM) { - return 0; - } - - set_rxd_buffer_size(sp, rxdp, size); - wmb(); - /* flip the Ownership bit to Hardware */ - rxdp->Control_1 |= RXD_OWN_XENA; - } - } - } - return 0; - -} - -static int s2io_add_isr(struct s2io_nic *sp) -{ - int ret = 0; - struct net_device *dev = sp->dev; - int err = 0; - - if (sp->config.intr_type == MSI_X) - ret = s2io_enable_msi_x(sp); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); - sp->config.intr_type = INTA; - } - - /* - * Store the values of the MSIX table in - * the struct s2io_nic structure - */ - store_xmsi_data(sp); - - /* After proper initialization of H/W, register ISR */ - if (sp->config.intr_type == MSI_X) { - int i, msix_rx_cnt = 0; - - for (i = 0; i < sp->num_entries; i++) { - if (sp->s2io_entries[i].in_use == MSIX_FLG) { - if (sp->s2io_entries[i].type == - MSIX_RING_TYPE) { - sprintf(sp->desc[i], "%s:MSI-X-%d-RX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_ring_handle, - 0, - sp->desc[i], - sp->s2io_entries[i].arg); - } else if (sp->s2io_entries[i].type == - MSIX_ALARM_TYPE) { - sprintf(sp->desc[i], "%s:MSI-X-%d-TX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_fifo_handle, - 0, - sp->desc[i], - sp->s2io_entries[i].arg); - - } - /* if either data or addr is zero print it. */ - if (!(sp->msix_info[i].addr && - sp->msix_info[i].data)) { - DBG_PRINT(ERR_DBG, - "%s @Addr:0x%llx Data:0x%llx\n", - sp->desc[i], - (unsigned long long) - sp->msix_info[i].addr, - (unsigned long long) - ntohl(sp->msix_info[i].data)); - } else - msix_rx_cnt++; - if (err) { - remove_msix_isr(sp); - - DBG_PRINT(ERR_DBG, - "%s:MSI-X-%d registration " - "failed\n", dev->name, i); - - DBG_PRINT(ERR_DBG, - "%s: Defaulting to INTA\n", - dev->name); - sp->config.intr_type = INTA; - break; - } - sp->s2io_entries[i].in_use = - MSIX_REGISTERED_SUCCESS; - } - } - if (!err) { - pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt); - DBG_PRINT(INFO_DBG, - "MSI-X-TX entries enabled through alarm vector\n"); - } - } - if (sp->config.intr_type == INTA) { - err = request_irq((int)sp->pdev->irq, s2io_isr, IRQF_SHARED, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - return -1; - } - } - return 0; -} - -static void s2io_rem_isr(struct s2io_nic *sp) -{ - if (sp->config.intr_type == MSI_X) - remove_msix_isr(sp); - else - remove_inta_isr(sp); -} - -static void do_s2io_card_down(struct s2io_nic *sp, int do_io) -{ - int cnt = 0; - struct XENA_dev_config __iomem *bar0 = sp->bar0; - register u64 val64 = 0; - struct config_param *config; - config = &sp->config; - - if (!is_s2io_card_up(sp)) - return; - - del_timer_sync(&sp->alarm_timer); - /* If s2io_set_link task is executing, wait till it completes. */ - while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) - msleep(50); - clear_bit(__S2IO_STATE_CARD_UP, &sp->state); - - /* Disable napi */ - if (sp->config.napi) { - int off = 0; - if (config->intr_type == MSI_X) { - for (; off < sp->config.rx_ring_num; off++) - napi_disable(&sp->mac_control.rings[off].napi); - } - else - napi_disable(&sp->napi); - } - - /* disable Tx and Rx traffic on the NIC */ - if (do_io) - stop_nic(sp); - - s2io_rem_isr(sp); - - /* stop the tx queue, indicate link down */ - s2io_link(sp, LINK_DOWN); - - /* Check if the device is Quiescent and then Reset the NIC */ - while (do_io) { - /* As per the HW requirement we need to replenish the - * receive buffer to avoid the ring bump. Since there is - * no intention of processing the Rx frame at this pointwe are - * just setting the ownership bit of rxd in Each Rx - * ring to HW and set the appropriate buffer size - * based on the ring mode - */ - rxd_owner_bit_reset(sp); - - val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(sp)) { - if (verify_pcc_quiescent(sp, sp->device_enabled_once)) - break; - } - - msleep(50); - cnt++; - if (cnt == 10) { - DBG_PRINT(ERR_DBG, "Device not Quiescent - " - "adapter status reads 0x%llx\n", - (unsigned long long)val64); - break; - } - } - if (do_io) - s2io_reset(sp); - - /* Free all Tx buffers */ - free_tx_buffers(sp); - - /* Free all Rx buffers */ - free_rx_buffers(sp); - - clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state)); -} - -static void s2io_card_down(struct s2io_nic *sp) -{ - do_s2io_card_down(sp, 1); -} - -static int s2io_card_up(struct s2io_nic *sp) -{ - int i, ret = 0; - struct config_param *config; - struct mac_info *mac_control; - struct net_device *dev = (struct net_device *)sp->dev; - u16 interruptible; - - /* Initialize the H/W I/O registers */ - ret = init_nic(sp); - if (ret != 0) { - DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", - dev->name); - if (ret != -EIO) - s2io_reset(sp); - return ret; - } - - /* - * Initializing the Rx buffers. For now we are considering only 1 - * Rx ring and initializing buffers into 30 Rx blocks - */ - config = &sp->config; - mac_control = &sp->mac_control; - - for (i = 0; i < config->rx_ring_num; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - ring->mtu = dev->mtu; - ring->lro = !!(dev->features & NETIF_F_LRO); - ret = fill_rx_buffers(sp, ring, 1); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n", - dev->name); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENOMEM; - } - DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, - ring->rx_bufs_left); - } - - /* Initialise napi */ - if (config->napi) { - if (config->intr_type == MSI_X) { - for (i = 0; i < sp->config.rx_ring_num; i++) - napi_enable(&sp->mac_control.rings[i].napi); - } else { - napi_enable(&sp->napi); - } - } - - /* Maintain the state prior to the open */ - if (sp->promisc_flg) - sp->promisc_flg = 0; - if (sp->m_cast_flg) { - sp->m_cast_flg = 0; - sp->all_multi_pos = 0; - } - - /* Setting its receive mode */ - s2io_set_multicast(dev); - - if (dev->features & NETIF_F_LRO) { - /* Initialize max aggregatable pkts per session based on MTU */ - sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu; - /* Check if we can use (if specified) user provided value */ - if (lro_max_pkts < sp->lro_max_aggr_per_sess) - sp->lro_max_aggr_per_sess = lro_max_pkts; - } - - /* Enable Rx Traffic and interrupts on the NIC */ - if (start_nic(sp)) { - DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENODEV; - } - - /* Add interrupt service routine */ - if (s2io_add_isr(sp) != 0) { - if (sp->config.intr_type == MSI_X) - s2io_rem_isr(sp); - s2io_reset(sp); - free_rx_buffers(sp); - return -ENODEV; - } - - S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2)); - - set_bit(__S2IO_STATE_CARD_UP, &sp->state); - - /* Enable select interrupts */ - en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS); - if (sp->config.intr_type != INTA) { - interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR; - en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); - } else { - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR; - en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); - } - - return 0; -} - -/** - * s2io_restart_nic - Resets the NIC. - * @data : long pointer to the device private structure - * Description: - * This function is scheduled to be run by the s2io_tx_watchdog - * function after 0.5 secs to reset the NIC. The idea is to reduce - * the run time of the watch dog routine which is run holding a - * spin lock. - */ - -static void s2io_restart_nic(struct work_struct *work) -{ - struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task); - struct net_device *dev = sp->dev; - - rtnl_lock(); - - if (!netif_running(dev)) - goto out_unlock; - - s2io_card_down(sp); - if (s2io_card_up(sp)) { - DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); - } - s2io_wake_all_tx_queue(sp); - DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); -out_unlock: - rtnl_unlock(); -} - -/** - * s2io_tx_watchdog - Watchdog for transmit side. - * @dev : Pointer to net device structure - * Description: - * This function is triggered if the Tx Queue is stopped - * for a pre-defined amount of time when the Interface is still up. - * If the Interface is jammed in such a situation, the hardware is - * reset (by s2io_close) and restarted again (by s2io_open) to - * overcome any problem that might have been caused in the hardware. - * Return value: - * void - */ - -static void s2io_tx_watchdog(struct net_device *dev) -{ - struct s2io_nic *sp = netdev_priv(dev); - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - if (netif_carrier_ok(dev)) { - swstats->watchdog_timer_cnt++; - schedule_work(&sp->rst_timer_task); - swstats->soft_reset_cnt++; - } -} - -/** - * rx_osm_handler - To perform some OS related operations on SKB. - * @sp: private member of the device structure,pointer to s2io_nic structure. - * @skb : the socket buffer pointer. - * @len : length of the packet - * @cksum : FCS checksum of the frame. - * @ring_no : the ring from which this RxD was extracted. - * Description: - * This function is called by the Rx interrupt serivce routine to perform - * some OS related operations on the SKB before passing it to the upper - * layers. It mainly checks if the checksum is OK, if so adds it to the - * SKBs cksum variable, increments the Rx packet count and passes the SKB - * to the upper layer. If the checksum is wrong, it increments the Rx - * packet error count, frees the SKB and returns error. - * Return value: - * SUCCESS on success and -1 on failure. - */ -static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) -{ - struct s2io_nic *sp = ring_data->nic; - struct net_device *dev = (struct net_device *)ring_data->dev; - struct sk_buff *skb = (struct sk_buff *) - ((unsigned long)rxdp->Host_Control); - int ring_no = ring_data->ring_no; - u16 l3_csum, l4_csum; - unsigned long long err = rxdp->Control_1 & RXD_T_CODE; - struct lro *uninitialized_var(lro); - u8 err_mask; - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - skb->dev = dev; - - if (err) { - /* Check for parity error */ - if (err & 0x1) - swstats->parity_err_cnt++; - - err_mask = err >> 48; - switch (err_mask) { - case 1: - swstats->rx_parity_err_cnt++; - break; - - case 2: - swstats->rx_abort_cnt++; - break; - - case 3: - swstats->rx_parity_abort_cnt++; - break; - - case 4: - swstats->rx_rda_fail_cnt++; - break; - - case 5: - swstats->rx_unkn_prot_cnt++; - break; - - case 6: - swstats->rx_fcs_err_cnt++; - break; - - case 7: - swstats->rx_buf_size_err_cnt++; - break; - - case 8: - swstats->rx_rxd_corrupt_cnt++; - break; - - case 15: - swstats->rx_unkn_err_cnt++; - break; - } - /* - * Drop the packet if bad transfer code. Exception being - * 0x5, which could be due to unsupported IPv6 extension header. - * In this case, we let stack handle the packet. - * Note that in this case, since checksum will be incorrect, - * stack will validate the same. - */ - if (err_mask != 0x5) { - DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", - dev->name, err_mask); - dev->stats.rx_crc_errors++; - swstats->mem_freed - += skb->truesize; - dev_kfree_skb(skb); - ring_data->rx_bufs_left -= 1; - rxdp->Host_Control = 0; - return 0; - } - } - - rxdp->Host_Control = 0; - if (sp->rxd_mode == RXD_MODE_1) { - int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2); - - skb_put(skb, len); - } else if (sp->rxd_mode == RXD_MODE_3B) { - int get_block = ring_data->rx_curr_get_info.block_index; - int get_off = ring_data->rx_curr_get_info.offset; - int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2); - int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2); - unsigned char *buff = skb_push(skb, buf0_len); - - struct buffAdd *ba = &ring_data->ba[get_block][get_off]; - memcpy(buff, ba->ba_0, buf0_len); - skb_put(skb, buf2_len); - } - - if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && - ((!ring_data->lro) || - (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) && - (dev->features & NETIF_F_RXCSUM)) { - l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); - l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1); - if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) { - /* - * NIC verifies if the Checksum of the received - * frame is Ok or not and accordingly returns - * a flag in the RxD. - */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - if (ring_data->lro) { - u32 tcp_len = 0; - u8 *tcp; - int ret = 0; - - ret = s2io_club_tcp_session(ring_data, - skb->data, &tcp, - &tcp_len, &lro, - rxdp, sp); - switch (ret) { - case 3: /* Begin anew */ - lro->parent = skb; - goto aggregate; - case 1: /* Aggregate */ - lro_append_pkt(sp, lro, skb, tcp_len); - goto aggregate; - case 4: /* Flush session */ - lro_append_pkt(sp, lro, skb, tcp_len); - queue_rx_frame(lro->parent, - lro->vlan_tag); - clear_lro_session(lro); - swstats->flush_max_pkts++; - goto aggregate; - case 2: /* Flush both */ - lro->parent->data_len = lro->frags_len; - swstats->sending_both++; - queue_rx_frame(lro->parent, - lro->vlan_tag); - clear_lro_session(lro); - goto send_up; - case 0: /* sessions exceeded */ - case -1: /* non-TCP or not L2 aggregatable */ - case 5: /* - * First pkt in session not - * L3/L4 aggregatable - */ - break; - default: - DBG_PRINT(ERR_DBG, - "%s: Samadhana!!\n", - __func__); - BUG(); - } - } - } else { - /* - * Packet with erroneous checksum, let the - * upper layers deal with it. - */ - skb_checksum_none_assert(skb); - } - } else - skb_checksum_none_assert(skb); - - swstats->mem_freed += skb->truesize; -send_up: - skb_record_rx_queue(skb, ring_no); - queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2)); -aggregate: - sp->mac_control.rings[ring_no].rx_bufs_left -= 1; - return SUCCESS; -} - -/** - * s2io_link - stops/starts the Tx queue. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * @link : inidicates whether link is UP/DOWN. - * Description: - * This function stops/starts the Tx queue depending on whether the link - * status of the NIC is is down or up. This is called by the Alarm - * interrupt handler whenever a link change interrupt comes up. - * Return value: - * void. - */ - -static void s2io_link(struct s2io_nic *sp, int link) -{ - struct net_device *dev = (struct net_device *)sp->dev; - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - if (link != sp->last_link_state) { - init_tti(sp, link); - if (link == LINK_DOWN) { - DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name); - s2io_stop_all_tx_queue(sp); - netif_carrier_off(dev); - if (swstats->link_up_cnt) - swstats->link_up_time = - jiffies - sp->start_time; - swstats->link_down_cnt++; - } else { - DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name); - if (swstats->link_down_cnt) - swstats->link_down_time = - jiffies - sp->start_time; - swstats->link_up_cnt++; - netif_carrier_on(dev); - s2io_wake_all_tx_queue(sp); - } - } - sp->last_link_state = link; - sp->start_time = jiffies; -} - -/** - * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. - * Description: - * This function initializes a few of the PCI and PCI-X configuration registers - * with recommended values. - * Return value: - * void - */ - -static void s2io_init_pci(struct s2io_nic *sp) -{ - u16 pci_cmd = 0, pcix_cmd = 0; - - /* Enable Data Parity Error Recovery in PCI-X command register. */ - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - (pcix_cmd | 1)); - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - - /* Set the PErr Response bit in PCI command register. */ - pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); - pci_write_config_word(sp->pdev, PCI_COMMAND, - (pci_cmd | PCI_COMMAND_PARITY)); - pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); -} - -static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, - u8 *dev_multiq) -{ - int i; - - if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) { - DBG_PRINT(ERR_DBG, "Requested number of tx fifos " - "(%d) not supported\n", tx_fifo_num); - - if (tx_fifo_num < 1) - tx_fifo_num = 1; - else - tx_fifo_num = MAX_TX_FIFOS; - - DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num); - } - - if (multiq) - *dev_multiq = multiq; - - if (tx_steering_type && (1 == tx_fifo_num)) { - if (tx_steering_type != TX_DEFAULT_STEERING) - DBG_PRINT(ERR_DBG, - "Tx steering is not supported with " - "one fifo. Disabling Tx steering.\n"); - tx_steering_type = NO_STEERING; - } - - if ((tx_steering_type < NO_STEERING) || - (tx_steering_type > TX_DEFAULT_STEERING)) { - DBG_PRINT(ERR_DBG, - "Requested transmit steering not supported\n"); - DBG_PRINT(ERR_DBG, "Disabling transmit steering\n"); - tx_steering_type = NO_STEERING; - } - - if (rx_ring_num > MAX_RX_RINGS) { - DBG_PRINT(ERR_DBG, - "Requested number of rx rings not supported\n"); - DBG_PRINT(ERR_DBG, "Default to %d rx rings\n", - MAX_RX_RINGS); - rx_ring_num = MAX_RX_RINGS; - } - - if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) { - DBG_PRINT(ERR_DBG, "Wrong intr_type requested. " - "Defaulting to INTA\n"); - *dev_intr_type = INTA; - } - - if ((*dev_intr_type == MSI_X) && - ((pdev->device != PCI_DEVICE_ID_HERC_WIN) && - (pdev->device != PCI_DEVICE_ID_HERC_UNI))) { - DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. " - "Defaulting to INTA\n"); - *dev_intr_type = INTA; - } - - if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) { - DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n"); - DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n"); - rx_ring_mode = 1; - } - - for (i = 0; i < MAX_RX_RINGS; i++) - if (rx_ring_sz[i] > MAX_RX_BLOCKS_PER_RING) { - DBG_PRINT(ERR_DBG, "Requested rx ring size not " - "supported\nDefaulting to %d\n", - MAX_RX_BLOCKS_PER_RING); - rx_ring_sz[i] = MAX_RX_BLOCKS_PER_RING; - } - - return SUCCESS; -} - -/** - * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS - * or Traffic class respectively. - * @nic: device private variable - * Description: The function configures the receive steering to - * desired receive ring. - * Return Value: SUCCESS on success and - * '-1' on failure (endian settings incorrect). - */ -static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring) -{ - struct XENA_dev_config __iomem *bar0 = nic->bar0; - register u64 val64 = 0; - - if (ds_codepoint > 63) - return FAILURE; - - val64 = RTS_DS_MEM_DATA(ring); - writeq(val64, &bar0->rts_ds_mem_data); - - val64 = RTS_DS_MEM_CTRL_WE | - RTS_DS_MEM_CTRL_STROBE_NEW_CMD | - RTS_DS_MEM_CTRL_OFFSET(ds_codepoint); - - writeq(val64, &bar0->rts_ds_mem_ctrl); - - return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl, - RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED, - S2IO_BIT_RESET); -} - -static const struct net_device_ops s2io_netdev_ops = { - .ndo_open = s2io_open, - .ndo_stop = s2io_close, - .ndo_get_stats = s2io_get_stats, - .ndo_start_xmit = s2io_xmit, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_multicast_list = s2io_set_multicast, - .ndo_do_ioctl = s2io_ioctl, - .ndo_set_mac_address = s2io_set_mac_addr, - .ndo_change_mtu = s2io_change_mtu, - .ndo_set_features = s2io_set_features, - .ndo_tx_timeout = s2io_tx_watchdog, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = s2io_netpoll, -#endif -}; - -/** - * s2io_init_nic - Initialization of the adapter . - * @pdev : structure containing the PCI related information of the device. - * @pre: List of PCI devices supported by the driver listed in s2io_tbl. - * Description: - * The function initializes an adapter identified by the pci_dec structure. - * All OS related initialization including memory and device structure and - * initlaization of the device private variable is done. Also the swapper - * control register is initialized to enable read and write into the I/O - * registers of the device. - * Return value: - * returns 0 on success and negative on failure. - */ - -static int __devinit -s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) -{ - struct s2io_nic *sp; - struct net_device *dev; - int i, j, ret; - int dma_flag = false; - u32 mac_up, mac_down; - u64 val64 = 0, tmp64 = 0; - struct XENA_dev_config __iomem *bar0 = NULL; - u16 subid; - struct config_param *config; - struct mac_info *mac_control; - int mode; - u8 dev_intr_type = intr_type; - u8 dev_multiq = 0; - - ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq); - if (ret) - return ret; - - ret = pci_enable_device(pdev); - if (ret) { - DBG_PRINT(ERR_DBG, - "%s: pci_enable_device failed\n", __func__); - return ret; - } - - if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { - DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__); - dma_flag = true; - if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { - DBG_PRINT(ERR_DBG, - "Unable to obtain 64bit DMA " - "for consistent allocations\n"); - pci_disable_device(pdev); - return -ENOMEM; - } - } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__); - } else { - pci_disable_device(pdev); - return -ENOMEM; - } - ret = pci_request_regions(pdev, s2io_driver_name); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n", - __func__, ret); - pci_disable_device(pdev); - return -ENODEV; - } - if (dev_multiq) - dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num); - else - dev = alloc_etherdev(sizeof(struct s2io_nic)); - if (dev == NULL) { - DBG_PRINT(ERR_DBG, "Device allocation failed\n"); - pci_disable_device(pdev); - pci_release_regions(pdev); - return -ENODEV; - } - - pci_set_master(pdev); - pci_set_drvdata(pdev, dev); - SET_NETDEV_DEV(dev, &pdev->dev); - - /* Private member variable initialized to s2io NIC structure */ - sp = netdev_priv(dev); - sp->dev = dev; - sp->pdev = pdev; - sp->high_dma_flag = dma_flag; - sp->device_enabled_once = false; - if (rx_ring_mode == 1) - sp->rxd_mode = RXD_MODE_1; - if (rx_ring_mode == 2) - sp->rxd_mode = RXD_MODE_3B; - - sp->config.intr_type = dev_intr_type; - - if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || - (pdev->device == PCI_DEVICE_ID_HERC_UNI)) - sp->device_type = XFRAME_II_DEVICE; - else - sp->device_type = XFRAME_I_DEVICE; - - - /* Initialize some PCI/PCI-X fields of the NIC. */ - s2io_init_pci(sp); - - /* - * Setting the device configuration parameters. - * Most of these parameters can be specified by the user during - * module insertion as they are module loadable parameters. If - * these parameters are not not specified during load time, they - * are initialized with default values. - */ - config = &sp->config; - mac_control = &sp->mac_control; - - config->napi = napi; - config->tx_steering_type = tx_steering_type; - - /* Tx side parameters. */ - if (config->tx_steering_type == TX_PRIORITY_STEERING) - config->tx_fifo_num = MAX_TX_FIFOS; - else - config->tx_fifo_num = tx_fifo_num; - - /* Initialize the fifos used for tx steering */ - if (config->tx_fifo_num < 5) { - if (config->tx_fifo_num == 1) - sp->total_tcp_fifos = 1; - else - sp->total_tcp_fifos = config->tx_fifo_num - 1; - sp->udp_fifo_idx = config->tx_fifo_num - 1; - sp->total_udp_fifos = 1; - sp->other_fifo_idx = sp->total_tcp_fifos - 1; - } else { - sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM - - FIFO_OTHER_MAX_NUM); - sp->udp_fifo_idx = sp->total_tcp_fifos; - sp->total_udp_fifos = FIFO_UDP_MAX_NUM; - sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM; - } - - config->multiq = dev_multiq; - for (i = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - tx_cfg->fifo_len = tx_fifo_len[i]; - tx_cfg->fifo_priority = i; - } - - /* mapping the QoS priority to the configured fifos */ - for (i = 0; i < MAX_TX_FIFOS; i++) - config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i]; - - /* map the hashing selector table to the configured fifos */ - for (i = 0; i < config->tx_fifo_num; i++) - sp->fifo_selector[i] = fifo_selector[i]; - - - config->tx_intr_type = TXD_INT_TYPE_UTILZ; - for (i = 0; i < config->tx_fifo_num; i++) { - struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; - - tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER); - if (tx_cfg->fifo_len < 65) { - config->tx_intr_type = TXD_INT_TYPE_PER_LIST; - break; - } - } - /* + 2 because one Txd for skb->data and one Txd for UFO */ - config->max_txds = MAX_SKB_FRAGS + 2; - - /* Rx side parameters. */ - config->rx_ring_num = rx_ring_num; - for (i = 0; i < config->rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - struct ring_info *ring = &mac_control->rings[i]; - - rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1); - rx_cfg->ring_priority = i; - ring->rx_bufs_left = 0; - ring->rxd_mode = sp->rxd_mode; - ring->rxd_count = rxd_count[sp->rxd_mode]; - ring->pdev = sp->pdev; - ring->dev = sp->dev; - } - - for (i = 0; i < rx_ring_num; i++) { - struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; - - rx_cfg->ring_org = RING_ORG_BUFF1; - rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER); - } - - /* Setting Mac Control parameters */ - mac_control->rmac_pause_time = rmac_pause_time; - mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3; - mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7; - - - /* initialize the shared memory used by the NIC and the host */ - if (init_shared_mem(sp)) { - DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name); - ret = -ENOMEM; - goto mem_alloc_failed; - } - - sp->bar0 = pci_ioremap_bar(pdev, 0); - if (!sp->bar0) { - DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n", - dev->name); - ret = -ENOMEM; - goto bar0_remap_failed; - } - - sp->bar1 = pci_ioremap_bar(pdev, 2); - if (!sp->bar1) { - DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n", - dev->name); - ret = -ENOMEM; - goto bar1_remap_failed; - } - - dev->irq = pdev->irq; - dev->base_addr = (unsigned long)sp->bar0; - - /* Initializing the BAR1 address as the start of the FIFO pointer. */ - for (j = 0; j < MAX_TX_FIFOS; j++) { - mac_control->tx_FIFO_start[j] = sp->bar1 + (j * 0x00020000); - } - - /* Driver entry points */ - dev->netdev_ops = &s2io_netdev_ops; - SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); - dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_TSO | NETIF_F_TSO6 | - NETIF_F_RXCSUM | NETIF_F_LRO; - dev->features |= dev->hw_features | - NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - if (sp->device_type & XFRAME_II_DEVICE) { - dev->hw_features |= NETIF_F_UFO; - if (ufo) - dev->features |= NETIF_F_UFO; - } - if (sp->high_dma_flag == true) - dev->features |= NETIF_F_HIGHDMA; - dev->watchdog_timeo = WATCH_DOG_TIMEOUT; - INIT_WORK(&sp->rst_timer_task, s2io_restart_nic); - INIT_WORK(&sp->set_link_task, s2io_set_link); - - pci_save_state(sp->pdev); - - /* Setting swapper control on the NIC, for proper reset operation */ - if (s2io_set_swapper(sp)) { - DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n", - dev->name); - ret = -EAGAIN; - goto set_swap_failed; - } - - /* Verify if the Herc works on the slot its placed into */ - if (sp->device_type & XFRAME_II_DEVICE) { - mode = s2io_verify_pci_mode(sp); - if (mode < 0) { - DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n", - __func__); - ret = -EBADSLT; - goto set_swap_failed; - } - } - - if (sp->config.intr_type == MSI_X) { - sp->num_entries = config->rx_ring_num + 1; - ret = s2io_enable_msi_x(sp); - - if (!ret) { - ret = s2io_test_msi(sp); - /* rollback MSI-X, will re-enable during add_isr() */ - remove_msix_isr(sp); - } - if (ret) { - - DBG_PRINT(ERR_DBG, - "MSI-X requested but failed to enable\n"); - sp->config.intr_type = INTA; - } - } - - if (config->intr_type == MSI_X) { - for (i = 0; i < config->rx_ring_num ; i++) { - struct ring_info *ring = &mac_control->rings[i]; - - netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64); - } - } else { - netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64); - } - - /* Not needed for Herc */ - if (sp->device_type & XFRAME_I_DEVICE) { - /* - * Fix for all "FFs" MAC address problems observed on - * Alpha platforms - */ - fix_mac_address(sp); - s2io_reset(sp); - } - - /* - * MAC address initialization. - * For now only one mac address will be read and used. - */ - bar0 = sp->bar0; - val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | - RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET); - writeq(val64, &bar0->rmac_addr_cmd_mem); - wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, - RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, - S2IO_BIT_RESET); - tmp64 = readq(&bar0->rmac_addr_data0_mem); - mac_down = (u32)tmp64; - mac_up = (u32) (tmp64 >> 32); - - sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up); - sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8); - sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16); - sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24); - sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16); - sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24); - - /* Set the factory defined MAC address initially */ - dev->addr_len = ETH_ALEN; - memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); - - /* initialize number of multicast & unicast MAC entries variables */ - if (sp->device_type == XFRAME_I_DEVICE) { - config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES; - config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES; - config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET; - } else if (sp->device_type == XFRAME_II_DEVICE) { - config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES; - config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES; - config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET; - } - - /* store mac addresses from CAM to s2io_nic structure */ - do_s2io_store_unicast_mc(sp); - - /* Configure MSIX vector for number of rings configured plus one */ - if ((sp->device_type == XFRAME_II_DEVICE) && - (config->intr_type == MSI_X)) - sp->num_entries = config->rx_ring_num + 1; - - /* Store the values of the MSIX table in the s2io_nic structure */ - store_xmsi_data(sp); - /* reset Nic and bring it to known state */ - s2io_reset(sp); - - /* - * Initialize link state flags - * and the card state parameter - */ - sp->state = 0; - - /* Initialize spinlocks */ - for (i = 0; i < sp->config.tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - - spin_lock_init(&fifo->tx_lock); - } - - /* - * SXE-002: Configure link and activity LED to init state - * on driver load. - */ - subid = sp->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { - val64 = readq(&bar0->gpio_control); - val64 |= 0x0000800000000000ULL; - writeq(val64, &bar0->gpio_control); - val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *)bar0 + 0x2700); - val64 = readq(&bar0->gpio_control); - } - - sp->rx_csum = 1; /* Rx chksum verify enabled by default */ - - if (register_netdev(dev)) { - DBG_PRINT(ERR_DBG, "Device registration failed\n"); - ret = -ENODEV; - goto register_failed; - } - s2io_vpd_read(sp); - DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n"); - DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name, - sp->product_name, pdev->revision); - DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, - s2io_driver_version); - DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr); - DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num); - if (sp->device_type & XFRAME_II_DEVICE) { - mode = s2io_print_pci_mode(sp); - if (mode < 0) { - ret = -EBADSLT; - unregister_netdev(dev); - goto set_swap_failed; - } - } - switch (sp->rxd_mode) { - case RXD_MODE_1: - DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n", - dev->name); - break; - case RXD_MODE_3B: - DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n", - dev->name); - break; - } - - switch (sp->config.napi) { - case 0: - DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); - break; - case 1: - DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); - break; - } - - DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, - sp->config.tx_fifo_num); - - DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name, - sp->config.rx_ring_num); - - switch (sp->config.intr_type) { - case INTA: - DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); - break; - case MSI_X: - DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name); - break; - } - if (sp->config.multiq) { - for (i = 0; i < sp->config.tx_fifo_num; i++) { - struct fifo_info *fifo = &mac_control->fifos[i]; - - fifo->multiq = config->multiq; - } - DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", - dev->name); - } else - DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", - dev->name); - - switch (sp->config.tx_steering_type) { - case NO_STEERING: - DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n", - dev->name); - break; - case TX_PRIORITY_STEERING: - DBG_PRINT(ERR_DBG, - "%s: Priority steering enabled for transmit\n", - dev->name); - break; - case TX_DEFAULT_STEERING: - DBG_PRINT(ERR_DBG, - "%s: Default steering enabled for transmit\n", - dev->name); - } - - DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", - dev->name); - if (ufo) - DBG_PRINT(ERR_DBG, - "%s: UDP Fragmentation Offload(UFO) enabled\n", - dev->name); - /* Initialize device name */ - sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name); - - if (vlan_tag_strip) - sp->vlan_strip_flag = 1; - else - sp->vlan_strip_flag = 0; - - /* - * Make Link state as off at this point, when the Link change - * interrupt comes the state will be automatically changed to - * the right state. - */ - netif_carrier_off(dev); - - return 0; - -register_failed: -set_swap_failed: - iounmap(sp->bar1); -bar1_remap_failed: - iounmap(sp->bar0); -bar0_remap_failed: -mem_alloc_failed: - free_shared_mem(sp); - pci_disable_device(pdev); - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - free_netdev(dev); - - return ret; -} - -/** - * s2io_rem_nic - Free the PCI device - * @pdev: structure containing the PCI related information of the device. - * Description: This function is called by the Pci subsystem to release a - * PCI device and free up all resource held up by the device. This could - * be in response to a Hot plug event or when the driver is to be removed - * from memory. - */ - -static void __devexit s2io_rem_nic(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct s2io_nic *sp; - - if (dev == NULL) { - DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n"); - return; - } - - sp = netdev_priv(dev); - - cancel_work_sync(&sp->rst_timer_task); - cancel_work_sync(&sp->set_link_task); - - unregister_netdev(dev); - - free_shared_mem(sp); - iounmap(sp->bar0); - iounmap(sp->bar1); - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - free_netdev(dev); - pci_disable_device(pdev); -} - -/** - * s2io_starter - Entry point for the driver - * Description: This function is the entry point for the driver. It verifies - * the module loadable parameters and initializes PCI configuration space. - */ - -static int __init s2io_starter(void) -{ - return pci_register_driver(&s2io_driver); -} - -/** - * s2io_closer - Cleanup routine for the driver - * Description: This function is the cleanup routine for the driver. It unregist * ers the driver. - */ - -static __exit void s2io_closer(void) -{ - pci_unregister_driver(&s2io_driver); - DBG_PRINT(INIT_DBG, "cleanup done\n"); -} - -module_init(s2io_starter); -module_exit(s2io_closer); - -static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip, - struct tcphdr **tcp, struct RxD_t *rxdp, - struct s2io_nic *sp) -{ - int ip_off; - u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len; - - if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) { - DBG_PRINT(INIT_DBG, - "%s: Non-TCP frames not supported for LRO\n", - __func__); - return -1; - } - - /* Checking for DIX type or DIX type with VLAN */ - if ((l2_type == 0) || (l2_type == 4)) { - ip_off = HEADER_ETHERNET_II_802_3_SIZE; - /* - * If vlan stripping is disabled and the frame is VLAN tagged, - * shift the offset by the VLAN header size bytes. - */ - if ((!sp->vlan_strip_flag) && - (rxdp->Control_1 & RXD_FRAME_VLAN_TAG)) - ip_off += HEADER_VLAN_SIZE; - } else { - /* LLC, SNAP etc are considered non-mergeable */ - return -1; - } - - *ip = (struct iphdr *)((u8 *)buffer + ip_off); - ip_len = (u8)((*ip)->ihl); - ip_len <<= 2; - *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len); - - return 0; -} - -static int check_for_socket_match(struct lro *lro, struct iphdr *ip, - struct tcphdr *tcp) -{ - DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); - if ((lro->iph->saddr != ip->saddr) || - (lro->iph->daddr != ip->daddr) || - (lro->tcph->source != tcp->source) || - (lro->tcph->dest != tcp->dest)) - return -1; - return 0; -} - -static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp) -{ - return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2); -} - -static void initiate_new_session(struct lro *lro, u8 *l2h, - struct iphdr *ip, struct tcphdr *tcp, - u32 tcp_pyld_len, u16 vlan_tag) -{ - DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); - lro->l2h = l2h; - lro->iph = ip; - lro->tcph = tcp; - lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq); - lro->tcp_ack = tcp->ack_seq; - lro->sg_num = 1; - lro->total_len = ntohs(ip->tot_len); - lro->frags_len = 0; - lro->vlan_tag = vlan_tag; - /* - * Check if we saw TCP timestamp. - * Other consistency checks have already been done. - */ - if (tcp->doff == 8) { - __be32 *ptr; - ptr = (__be32 *)(tcp+1); - lro->saw_ts = 1; - lro->cur_tsval = ntohl(*(ptr+1)); - lro->cur_tsecr = *(ptr+2); - } - lro->in_use = 1; -} - -static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro) -{ - struct iphdr *ip = lro->iph; - struct tcphdr *tcp = lro->tcph; - __sum16 nchk; - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); - - /* Update L3 header */ - ip->tot_len = htons(lro->total_len); - ip->check = 0; - nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl); - ip->check = nchk; - - /* Update L4 header */ - tcp->ack_seq = lro->tcp_ack; - tcp->window = lro->window; - - /* Update tsecr field if this session has timestamps enabled */ - if (lro->saw_ts) { - __be32 *ptr = (__be32 *)(tcp + 1); - *(ptr+2) = lro->cur_tsecr; - } - - /* Update counters required for calculation of - * average no. of packets aggregated. - */ - swstats->sum_avg_pkts_aggregated += lro->sg_num; - swstats->num_aggregations++; -} - -static void aggregate_new_rx(struct lro *lro, struct iphdr *ip, - struct tcphdr *tcp, u32 l4_pyld) -{ - DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); - lro->total_len += l4_pyld; - lro->frags_len += l4_pyld; - lro->tcp_next_seq += l4_pyld; - lro->sg_num++; - - /* Update ack seq no. and window ad(from this pkt) in LRO object */ - lro->tcp_ack = tcp->ack_seq; - lro->window = tcp->window; - - if (lro->saw_ts) { - __be32 *ptr; - /* Update tsecr and tsval from this packet */ - ptr = (__be32 *)(tcp+1); - lro->cur_tsval = ntohl(*(ptr+1)); - lro->cur_tsecr = *(ptr + 2); - } -} - -static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip, - struct tcphdr *tcp, u32 tcp_pyld_len) -{ - u8 *ptr; - - DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); - - if (!tcp_pyld_len) { - /* Runt frame or a pure ack */ - return -1; - } - - if (ip->ihl != 5) /* IP has options */ - return -1; - - /* If we see CE codepoint in IP header, packet is not mergeable */ - if (INET_ECN_is_ce(ipv4_get_dsfield(ip))) - return -1; - - /* If we see ECE or CWR flags in TCP header, packet is not mergeable */ - if (tcp->urg || tcp->psh || tcp->rst || - tcp->syn || tcp->fin || - tcp->ece || tcp->cwr || !tcp->ack) { - /* - * Currently recognize only the ack control word and - * any other control field being set would result in - * flushing the LRO session - */ - return -1; - } - - /* - * Allow only one TCP timestamp option. Don't aggregate if - * any other options are detected. - */ - if (tcp->doff != 5 && tcp->doff != 8) - return -1; - - if (tcp->doff == 8) { - ptr = (u8 *)(tcp + 1); - while (*ptr == TCPOPT_NOP) - ptr++; - if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP) - return -1; - - /* Ensure timestamp value increases monotonically */ - if (l_lro) - if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2)))) - return -1; - - /* timestamp echo reply should be non-zero */ - if (*((__be32 *)(ptr+6)) == 0) - return -1; - } - - return 0; -} - -static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, - u8 **tcp, u32 *tcp_len, struct lro **lro, - struct RxD_t *rxdp, struct s2io_nic *sp) -{ - struct iphdr *ip; - struct tcphdr *tcph; - int ret = 0, i; - u16 vlan_tag = 0; - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp, - rxdp, sp); - if (ret) - return ret; - - DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr); - - vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2); - tcph = (struct tcphdr *)*tcp; - *tcp_len = get_l4_pyld_length(ip, tcph); - for (i = 0; i < MAX_LRO_SESSIONS; i++) { - struct lro *l_lro = &ring_data->lro0_n[i]; - if (l_lro->in_use) { - if (check_for_socket_match(l_lro, ip, tcph)) - continue; - /* Sock pair matched */ - *lro = l_lro; - - if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) { - DBG_PRINT(INFO_DBG, "%s: Out of sequence. " - "expected 0x%x, actual 0x%x\n", - __func__, - (*lro)->tcp_next_seq, - ntohl(tcph->seq)); - - swstats->outof_sequence_pkts++; - ret = 2; - break; - } - - if (!verify_l3_l4_lro_capable(l_lro, ip, tcph, - *tcp_len)) - ret = 1; /* Aggregate */ - else - ret = 2; /* Flush both */ - break; - } - } - - if (ret == 0) { - /* Before searching for available LRO objects, - * check if the pkt is L3/L4 aggregatable. If not - * don't create new LRO session. Just send this - * packet up. - */ - if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) - return 5; - - for (i = 0; i < MAX_LRO_SESSIONS; i++) { - struct lro *l_lro = &ring_data->lro0_n[i]; - if (!(l_lro->in_use)) { - *lro = l_lro; - ret = 3; /* Begin anew */ - break; - } - } - } - - if (ret == 0) { /* sessions exceeded */ - DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n", - __func__); - *lro = NULL; - return ret; - } - - switch (ret) { - case 3: - initiate_new_session(*lro, buffer, ip, tcph, *tcp_len, - vlan_tag); - break; - case 2: - update_L3L4_header(sp, *lro); - break; - case 1: - aggregate_new_rx(*lro, ip, tcph, *tcp_len); - if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) { - update_L3L4_header(sp, *lro); - ret = 4; /* Flush the LRO */ - } - break; - default: - DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__); - break; - } - - return ret; -} - -static void clear_lro_session(struct lro *lro) -{ - static u16 lro_struct_size = sizeof(struct lro); - - memset(lro, 0, lro_struct_size); -} - -static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag) -{ - struct net_device *dev = skb->dev; - struct s2io_nic *sp = netdev_priv(dev); - - skb->protocol = eth_type_trans(skb, dev); - if (vlan_tag && sp->vlan_strip_flag) - __vlan_hwaccel_put_tag(skb, vlan_tag); - if (sp->config.napi) - netif_receive_skb(skb); - else - netif_rx(skb); -} - -static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro, - struct sk_buff *skb, u32 tcp_len) -{ - struct sk_buff *first = lro->parent; - struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; - - first->len += tcp_len; - first->data_len = lro->frags_len; - skb_pull(skb, (skb->len - tcp_len)); - if (skb_shinfo(first)->frag_list) - lro->last_frag->next = skb; - else - skb_shinfo(first)->frag_list = skb; - first->truesize += skb->truesize; - lro->last_frag = skb; - swstats->clubbed_frms_cnt++; -} - -/** - * s2io_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci connection state - * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ -static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct s2io_nic *sp = netdev_priv(netdev); - - netif_device_detach(netdev); - - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(netdev)) { - /* Bring down the card, while avoiding PCI I/O */ - do_s2io_card_down(sp, 0); - } - pci_disable_device(pdev); - - return PCI_ERS_RESULT_NEED_RESET; -} - -/** - * s2io_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device - * - * Restart the card from scratch, as if from a cold-boot. - * At this point, the card has exprienced a hard reset, - * followed by fixups by BIOS, and has its config space - * set up identically to what it was at cold boot. - */ -static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct s2io_nic *sp = netdev_priv(netdev); - - if (pci_enable_device(pdev)) { - pr_err("Cannot re-enable PCI device after reset.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - - pci_set_master(pdev); - s2io_reset(sp); - - return PCI_ERS_RESULT_RECOVERED; -} - -/** - * s2io_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device - * - * This callback is called when the error recovery driver tells - * us that its OK to resume normal operation. - */ -static void s2io_io_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct s2io_nic *sp = netdev_priv(netdev); - - if (netif_running(netdev)) { - if (s2io_card_up(sp)) { - pr_err("Can't bring device back up after reset.\n"); - return; - } - - if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) { - s2io_card_down(sp); - pr_err("Can't restore mac addr after reset.\n"); - return; - } - } - - netif_device_attach(netdev); - netif_tx_wake_all_queues(netdev); -} |