summaryrefslogtreecommitdiff
path: root/drivers/net/s2io.c
diff options
context:
space:
mode:
authorravinandan.arakali@neterion.com <ravinandan.arakali@neterion.com>2005-08-12 10:15:59 -0700
committerJeff Garzik <jgarzik@pobox.com>2005-08-19 21:42:06 -0400
commite960fc5c7d9144b1ce80dda9891ca7dfc656c078 (patch)
treed3e46f30bc21b1704c84e1d4e52cf4e171c7e0d0 /drivers/net/s2io.c
parent3d52365c4f62edb9ff9710e1c57952e957b2879f (diff)
[PATCH] S2io: Hardware fixes for Xframe II adapter
Hi, Patch Description: This patch incorporates the following hardware fixes required for Xframe II adapter. 1. New values to program the dtx_control register. 2. Disable memory controller interrupts(MC_INTR) since these are now monitored thru' a poll routine. 3. Don't reset an XframeII card on an ECC double-bit error(It can recover). 4. Save/restore PCI config space before/after a reset irrespective of Xframe I or II card. 5. Bumped up the driver version no. to 2.0.3.1 Please review the patch and apply the same if it looks ok. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r--drivers/net/s2io.c37
1 files changed, 18 insertions, 19 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index e083351e3f42..7ca78228b104 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -67,7 +67,7 @@
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
-static char s2io_driver_version[] = "Version 2.0.2.1";
+static char s2io_driver_version[] = "Version 2.0.3.1";
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
@@ -210,14 +210,18 @@ static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
static u64 herc_act_dtx_cfg[] = {
/* Set address */
- 0x80000515BA750000ULL, 0x80000515BA7500E0ULL,
+ 0x8000051536750000ULL, 0x80000515367500E0ULL,
/* Write data */
- 0x80000515BA750004ULL, 0x80000515BA7500E4ULL,
+ 0x8000051536750004ULL, 0x80000515367500E4ULL,
/* Set address */
0x80010515003F0000ULL, 0x80010515003F00E0ULL,
/* Write data */
0x80010515003F0004ULL, 0x80010515003F00E4ULL,
/* Set address */
+ 0x801205150D440000ULL, 0x801205150D4400E0ULL,
+ /* Write data */
+ 0x801205150D440004ULL, 0x801205150D4400E4ULL,
+ /* Set address */
0x80020515F2100000ULL, 0x80020515F21000E0ULL,
/* Write data */
0x80020515F2100004ULL, 0x80020515F21000E4ULL,
@@ -1903,7 +1907,7 @@ static int start_nic(struct s2io_nic *nic)
}
/* Enable select interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR;
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
interruptible |= TX_PIC_INTR | RX_PIC_INTR;
interruptible |= TX_MAC_INTR | RX_MAC_INTR;
@@ -2030,7 +2034,7 @@ static void stop_nic(struct s2io_nic *nic)
config = &nic->config;
/* Disable all interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR;
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
interruptible |= TX_PIC_INTR | RX_PIC_INTR;
interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
@@ -2688,8 +2692,10 @@ static void alarm_intr_handler(struct s2io_nic *nic)
DBG_PRINT(ERR_DBG, "%s: Device indicates ",
dev->name);
DBG_PRINT(ERR_DBG, "double ECC error!!\n");
- netif_stop_queue(dev);
- schedule_work(&nic->rst_timer_task);
+ if (nic->device_type != XFRAME_II_DEVICE) {
+ netif_stop_queue(dev);
+ schedule_work(&nic->rst_timer_task);
+ }
} else {
nic->mac_control.stats_info->sw_stat.
single_ecc_errs++;
@@ -2772,8 +2778,7 @@ void s2io_reset(nic_t * sp)
u16 subid, pci_cmd;
/* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
- if (sp->device_type == XFRAME_I_DEVICE)
- pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
+ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
@@ -2792,14 +2797,10 @@ void s2io_reset(nic_t * sp)
*/
msleep(250);
- if (!(sp->device_type & XFRAME_II_DEVICE)) {
- /* Restore the PCI state saved during initializarion. */
- pci_restore_state(sp->pdev);
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ /* Restore the PCI state saved during initialization. */
+ pci_restore_state(sp->pdev);
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
pci_cmd);
- } else {
- pci_set_master(sp->pdev);
- }
s2io_init_pci(sp);
msleep(250);
@@ -5426,9 +5427,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
INIT_WORK(&sp->set_link_task,
(void (*)(void *)) s2io_set_link, sp);
- if (!(sp->device_type & XFRAME_II_DEVICE)) {
- pci_save_state(sp->pdev);
- }
+ pci_save_state(sp->pdev);
/* Setting swapper control on the NIC, for proper reset operation */
if (s2io_set_swapper(sp)) {