Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David

1 files changed, 82 insertions, 121 deletions

diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index 3d950c2cf205..cfc6a5b5a477 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -26,7 +26,7 @@
 /* Board types */
 #define FALCON_BOARD_SFE4001 0x01
 #define FALCON_BOARD_SFE4002 0x02
-#define FALCON_BOARD_SFN4111T 0x51
+#define FALCON_BOARD_SFE4003 0x03
 #define FALCON_BOARD_SFN4112F 0x52
 
 /* Board temperature is about 15°C above ambient when air flow is
@@ -142,17 +142,17 @@ static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 #endif /* CONFIG_SENSORS_LM87 */
 
 /*****************************************************************************
- * Support for the SFE4001 and SFN4111T NICs.
+ * Support for the SFE4001 NIC.
  *
  * The SFE4001 does not power-up fully at reset due to its high power
  * consumption.  We control its power via a PCA9539 I/O expander.
- * Both boards have a MAX6647 temperature monitor which we expose to
+ * It also has a MAX6647 temperature monitor which we expose to
  * the lm90 driver.
  *
  * This also provides minimal support for reflashing the PHY, which is
  * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
  * On SFE4001 rev A2 and later this is connected to the 3V3X output of
- * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3.
+ * the IO-expander.
  * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
  * exclusive with the network device being open.
  */
@@ -304,34 +304,6 @@ fail_on:
 	return rc;
 }
 
-static int sfn4111t_reset(struct efx_nic *efx)
-{
-	struct falcon_board *board = falcon_board(efx);
-	efx_oword_t reg;
-
-	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
-	i2c_lock_adapter(&board->i2c_adap);
-
-	/* Pull RST_N (GPIO 2) low then let it up again, setting the
-	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
-	 * output enables; the output levels should always be 0 (low)
-	 * and we rely on external pull-ups. */
-	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
-	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, true);
-	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
-	msleep(1000);
-	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, false);
-	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN,
-			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
-	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
-	msleep(1);
-
-	i2c_unlock_adapter(&board->i2c_adap);
-
-	ssleep(1);
-	return 0;
-}
-
 static ssize_t show_phy_flash_cfg(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -363,10 +335,7 @@ static ssize_t set_phy_flash_cfg(struct device *dev,
 		efx->phy_mode = new_mode;
 		if (new_mode & PHY_MODE_SPECIAL)
 			falcon_stop_nic_stats(efx);
-		if (falcon_board(efx)->type->id == FALCON_BOARD_SFE4001)
-			err = sfe4001_poweron(efx);
-		else
-			err = sfn4111t_reset(efx);
+		err = sfe4001_poweron(efx);
 		if (!err)
 			err = efx_reconfigure_port(efx);
 		if (!(new_mode & PHY_MODE_SPECIAL))
@@ -479,83 +448,6 @@ fail_hwmon:
 	return rc;
 }
 
-static int sfn4111t_check_hw(struct efx_nic *efx)
-{
-	s32 status;
-
-	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && !efx->xmac_poll_required)
-		return 0;
-
-	/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
-	status = i2c_smbus_read_byte_data(falcon_board(efx)->hwmon_client,
-					  MAX664X_REG_RSL);
-	if (status < 0)
-		return -EIO;
-	if (status & 0x57)
-		return -ERANGE;
-	return 0;
-}
-
-static void sfn4111t_fini(struct efx_nic *efx)
-{
-	netif_info(efx, drv, efx->net_dev, "%s\n", __func__);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	i2c_unregister_device(falcon_board(efx)->hwmon_client);
-}
-
-static struct i2c_board_info sfn4111t_a0_hwmon_info = {
-	I2C_BOARD_INFO("max6647", 0x4e),
-};
-
-static struct i2c_board_info sfn4111t_r5_hwmon_info = {
-	I2C_BOARD_INFO("max6646", 0x4d),
-};
-
-static void sfn4111t_init_phy(struct efx_nic *efx)
-{
-	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
-		if (sft9001_wait_boot(efx) != -EINVAL)
-			return;
-
-		efx->phy_mode = PHY_MODE_SPECIAL;
-		falcon_stop_nic_stats(efx);
-	}
-
-	sfn4111t_reset(efx);
-	sft9001_wait_boot(efx);
-}
-
-static int sfn4111t_init(struct efx_nic *efx)
-{
-	struct falcon_board *board = falcon_board(efx);
-	int rc;
-
-	board->hwmon_client =
-		i2c_new_device(&board->i2c_adap,
-			       (board->minor < 5) ?
-			       &sfn4111t_a0_hwmon_info :
-			       &sfn4111t_r5_hwmon_info);
-	if (!board->hwmon_client)
-		return -EIO;
-
-	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	if (rc)
-		goto fail_hwmon;
-
-	if (efx->phy_mode & PHY_MODE_SPECIAL)
-		/* PHY may not generate a 156.25 MHz clock and MAC
-		 * stats fetch will fail. */
-		falcon_stop_nic_stats(efx);
-
-	return 0;
-
-fail_hwmon:
-	i2c_unregister_device(board->hwmon_client);
-	return rc;
-}
-
 /*****************************************************************************
  * Support for the SFE4002
  *
@@ -691,6 +583,75 @@ static int sfn4112f_init(struct efx_nic *efx)
 	return efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
 }
 
+/*****************************************************************************
+ * Support for the SFE4003
+ *
+ */
+static u8 sfe4003_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfe4003_lm87_regs[] = {
+	LM87_IN_LIMITS(0, 0x67, 0x7f),		/* 2.5V:  1.5V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 70 + FALCON_BOARD_TEMP_BIAS),
+	0
+};
+
+static struct i2c_board_info sfe4003_hwmon_info = {
+	I2C_BOARD_INFO("lm87", 0x2e),
+	.platform_data	= &sfe4003_lm87_channel,
+};
+
+/* Board-specific LED info. */
+#define SFE4003_RED_LED_GPIO	11
+#define SFE4003_LED_ON		1
+#define SFE4003_LED_OFF		0
+
+static void sfe4003_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+	struct falcon_board *board = falcon_board(efx);
+
+	/* The LEDs were not wired to GPIOs before A3 */
+	if (board->minor < 3 && board->major == 0)
+		return;
+
+	falcon_txc_set_gpio_val(
+		efx, SFE4003_RED_LED_GPIO,
+		(mode == EFX_LED_ON) ? SFE4003_LED_ON : SFE4003_LED_OFF);
+}
+
+static void sfe4003_init_phy(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+
+	/* The LEDs were not wired to GPIOs before A3 */
+	if (board->minor < 3 && board->major == 0)
+		return;
+
+	falcon_txc_set_gpio_dir(efx, SFE4003_RED_LED_GPIO, TXC_GPIO_DIR_OUTPUT);
+	falcon_txc_set_gpio_val(efx, SFE4003_RED_LED_GPIO, SFE4003_LED_OFF);
+}
+
+static int sfe4003_check_hw(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+
+	/* A0/A1/A2 board rev. 4003s  report a temperature fault the whole time
+	 * (bad sensor) so we mask it out. */
+	unsigned alarm_mask =
+		(board->major == 0 && board->minor <= 2) ?
+		~LM87_ALARM_TEMP_EXT1 : ~0;
+
+	return efx_check_lm87(efx, alarm_mask);
+}
+
+static int sfe4003_init(struct efx_nic *efx)
+{
+	return efx_init_lm87(efx, &sfe4003_hwmon_info, sfe4003_lm87_regs);
+}
+
 static const struct falcon_board_type board_types[] = {
 	{
 		.id		= FALCON_BOARD_SFE4001,
@@ -713,14 +674,14 @@ static const struct falcon_board_type board_types[] = {
 		.monitor	= sfe4002_check_hw,
 	},
 	{
-		.id		= FALCON_BOARD_SFN4111T,
-		.ref_model	= "SFN4111T",
-		.gen_type	= "100/1000/10GBASE-T adapter",
-		.init		= sfn4111t_init,
-		.init_phy	= sfn4111t_init_phy,
-		.fini		= sfn4111t_fini,
-		.set_id_led	= tenxpress_set_id_led,
-		.monitor	= sfn4111t_check_hw,
+		.id		= FALCON_BOARD_SFE4003,
+		.ref_model	= "SFE4003",
+		.gen_type	= "10GBASE-CX4 adapter",
+		.init		= sfe4003_init,
+		.init_phy	= sfe4003_init_phy,
+		.fini		= efx_fini_lm87,
+		.set_id_led	= sfe4003_set_id_led,
+		.monitor	= sfe4003_check_hw,
 	},
 	{
 		.id		= FALCON_BOARD_SFN4112F,