Merge branch 'linus' into x86/irqtip-x86-irq-2008-06-16_09.27_Mon

1 files changed, 21 insertions, 7 deletions

diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 11fa9fb8f48b..66a0d1442aba 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -116,20 +116,29 @@ void sfe4001_poweroff(struct efx_nic *efx)
 
 	/* Turn off all power rails */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
 
 	/* Disable port 1 outputs on IO expander */
 	cfg = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+	efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
 
 	/* Disable port 0 outputs on IO expander */
 	cfg = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+	efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
 
 	/* Clear any over-temperature alert */
-	(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+	efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
 }
 
+/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
+ * to the FLASH_CFG_1 input on the DSP.  We must keep it high at power-
+ * up to allow writing the flash (done through MDIO from userland).
+ */
+unsigned int sfe4001_phy_flash_cfg;
+module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444);
+MODULE_PARM_DESC(phy_flash_cfg,
+		 "Force PHY to enter flash configuration mode");
+
 /* This board uses an I2C expander to provider power to the PHY, which needs to
  * be turned on before the PHY can be used.
  * Context: Process context, rtnl lock held
@@ -203,6 +212,8 @@ int sfe4001_poweron(struct efx_nic *efx)
 		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
 			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
 			       (1 << P0_X_TRST_LBN));
+		if (sfe4001_phy_flash_cfg)
+			out |= 1 << P0_EN_3V3X_LBN;
 
 		rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
 		if (rc)
@@ -226,6 +237,9 @@ int sfe4001_poweron(struct efx_nic *efx)
 		if (in & (1 << P1_AFE_PWD_LBN))
 			goto done;
 
+		/* DSP doesn't look powered in flash config mode */
+		if (sfe4001_phy_flash_cfg)
+			goto done;
 	} while (++count < 20);
 
 	EFX_INFO(efx, "timed out waiting for power\n");
@@ -239,14 +253,14 @@ done:
 fail3:
 	/* Turn off all power rails */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
 	/* Disable port 1 outputs on IO expander */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
 fail2:
 	/* Disable port 0 outputs on IO expander */
 	out = 0xff;
-	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+	efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
 fail1:
 	return rc;
 }