Merge commit 'v2.6.39' into for-2.6.40/core

Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

1 files changed, 19 insertions, 4 deletions

diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index cb317cd069ff..484f795a779d 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -240,7 +240,8 @@ static const struct ethtool_ops sis900_ethtool_ops;
  *	@net_dev: the net device to get address for
  *
  *	Older SiS900 and friends, use EEPROM to store MAC address.
- *	MAC address is read from read_eeprom() into @net_dev->dev_addr.
+ *	MAC address is read from read_eeprom() into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
  */
 
 static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
@@ -261,6 +262,9 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 	for (i = 0; i < 3; i++)
 	        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
 
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	return 1;
 }
 
@@ -271,7 +275,8 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
  *
  *	SiS630E model, use APC CMOS RAM to store MAC address.
  *	APC CMOS RAM is accessed through ISA bridge.
- *	MAC address is read into @net_dev->dev_addr.
+ *	MAC address is read into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
  */
 
 static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
@@ -296,6 +301,10 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
 		outb(0x09 + i, 0x70);
 		((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
 	}
+
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
 	pci_dev_put(isa_bridge);
 
@@ -310,7 +319,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
  *
  *	SiS635 model, set MAC Reload Bit to load Mac address from APC
  *	to rfdr. rfdr is accessed through rfcr. MAC address is read into
- *	@net_dev->dev_addr.
+ *	@net_dev->dev_addr and @net_dev->perm_addr.
  */
 
 static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
@@ -334,6 +343,9 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
 		*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
 	}
 
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	/* enable packet filtering */
 	outl(rfcrSave | RFEN, rfcr + ioaddr);
 
@@ -353,7 +365,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
  *	EEDONE signal to refuse EEPROM access by LAN.
  *	The EEPROM map of SiS962 or SiS963 is different to SiS900.
  *	The signature field in SiS962 or SiS963 spec is meaningless.
- *	MAC address is read into @net_dev->dev_addr.
+ *	MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
  */
 
 static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
@@ -372,6 +384,9 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
 			for (i = 0; i < 3; i++)
 			        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
 
+			/* Store MAC Address in perm_addr */
+			memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 			outl(EEDONE, ee_addr);
 			return 1;
 		} else {