i825xx: Move the Intel 82586/82593/82596 based drivers

Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes.  There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.

CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 318 deletions

diff --git a/drivers/net/sun3_82586.h b/drivers/net/sun3_82586.h
deleted file mode 100644
index 93346f00486b..000000000000
--- a/drivers/net/sun3_82586.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * Intel i82586 Ethernet definitions
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same Gnu Public License that covers that work.
- *
- * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
- *
- * I have done a look in the following sources:
- *   crynwr-packet-driver by Russ Nelson
- *   Garret A. Wollman's i82586-driver for BSD
- */
-
-/*
- * Cloned from ni52.h, copyright as above.
- *
- * Modified for Sun3 OBIO i82586 by Sam Creasey (sammy@sammy.net)
- */
-
-
-/* defines for the obio chip (not vme) */
-#define IEOB_NORSET 0x80        /* don't reset the board */
-#define IEOB_ONAIR  0x40        /* put us on the air */
-#define IEOB_ATTEN  0x20        /* attention! */
-#define IEOB_IENAB  0x10        /* interrupt enable */
-#define IEOB_XXXXX  0x08        /* free bit */
-#define IEOB_XCVRL2 0x04        /* level 2 transceiver? */
-#define IEOB_BUSERR 0x02        /* bus error */
-#define IEOB_INT    0x01        /* interrupt */
-
-/* where the obio one lives */
-#define IE_OBIO 0xc0000
-#define IE_IRQ 3
-
-/*
- * where to find the System Configuration Pointer (SCP)
- */
-#define SCP_DEFAULT_ADDRESS 0xfffff4
-
-
-/*
- * System Configuration Pointer Struct
- */
-
-struct scp_struct
-{
-  unsigned short zero_dum0;	/* has to be zero */
-  unsigned char  sysbus;	/* 0=16Bit,1=8Bit */
-  unsigned char  zero_dum1;	/* has to be zero for 586 */
-  unsigned short zero_dum2;
-  unsigned short zero_dum3;
-  char          *iscp;		/* pointer to the iscp-block */
-};
-
-
-/*
- * Intermediate System Configuration Pointer (ISCP)
- */
-struct iscp_struct
-{
-  unsigned char  busy;          /* 586 clears after successful init */
-  unsigned char  zero_dummy;    /* has to be zero */
-  unsigned short scb_offset;    /* pointeroffset to the scb_base */
-  char          *scb_base;      /* base-address of all 16-bit offsets */
-};
-
-/*
- * System Control Block (SCB)
- */
-struct scb_struct
-{
-  unsigned char rus;
-  unsigned char cus;
-  unsigned char cmd_ruc;           /* command word: RU part */
-  unsigned char cmd_cuc;           /* command word: CU part & ACK */
-  unsigned short cbl_offset;    /* pointeroffset, command block list */
-  unsigned short rfa_offset;    /* pointeroffset, receive frame area */
-  unsigned short crc_errs;      /* CRC-Error counter */
-  unsigned short aln_errs;      /* allignmenterror counter */
-  unsigned short rsc_errs;      /* Resourceerror counter */
-  unsigned short ovrn_errs;     /* OVerrunerror counter */
-};
-
-/*
- * possible command values for the command word
- */
-#define RUC_MASK	0x0070	/* mask for RU commands */
-#define RUC_NOP		0x0000	/* NOP-command */
-#define RUC_START	0x0010	/* start RU */
-#define RUC_RESUME	0x0020	/* resume RU after suspend */
-#define RUC_SUSPEND	0x0030	/* suspend RU */
-#define RUC_ABORT	0x0040	/* abort receiver operation immediately */
-
-#define CUC_MASK        0x07  /* mask for CU command */
-#define CUC_NOP         0x00  /* NOP-command */
-#define CUC_START       0x01  /* start execution of 1. cmd on the CBL */
-#define CUC_RESUME      0x02  /* resume after suspend */
-#define CUC_SUSPEND     0x03  /* Suspend CU */
-#define CUC_ABORT       0x04  /* abort command operation immediately */
-
-#define ACK_MASK        0xf0  /* mask for ACK command */
-#define ACK_CX          0x80  /* acknowledges STAT_CX */
-#define ACK_FR          0x40  /* ack. STAT_FR */
-#define ACK_CNA         0x20  /* ack. STAT_CNA */
-#define ACK_RNR         0x10  /* ack. STAT_RNR */
-
-/*
- * possible status values for the status word
- */
-#define STAT_MASK       0xf0  /* mask for cause of interrupt */
-#define STAT_CX         0x80  /* CU finished cmd with its I bit set */
-#define STAT_FR         0x40  /* RU finished receiving a frame */
-#define STAT_CNA        0x20  /* CU left active state */
-#define STAT_RNR        0x10  /* RU left ready state */
-
-#define CU_STATUS       0x7   /* CU status, 0=idle */
-#define CU_SUSPEND      0x1   /* CU is suspended */
-#define CU_ACTIVE       0x2   /* CU is active */
-
-#define RU_STATUS	0x70	/* RU status, 0=idle */
-#define RU_SUSPEND	0x10	/* RU suspended */
-#define RU_NOSPACE	0x20	/* RU no resources */
-#define RU_READY	0x40	/* RU is ready */
-
-/*
- * Receive Frame Descriptor (RFD)
- */
-struct rfd_struct
-{
-  unsigned char  stat_low;	/* status word */
-  unsigned char  stat_high;	/* status word */
-  unsigned char  rfd_sf;	/* 82596 mode only */
-  unsigned char  last;		/* Bit15,Last Frame on List / Bit14,suspend */
-  unsigned short next;		/* linkoffset to next RFD */
-  unsigned short rbd_offset;	/* pointeroffset to RBD-buffer */
-  unsigned char  dest[6];	/* ethernet-address, destination */
-  unsigned char  source[6];	/* ethernet-address, source */
-  unsigned short length;	/* 802.3 frame-length */
-  unsigned short zero_dummy;	/* dummy */
-};
-
-#define RFD_LAST     0x80	/* last: last rfd in the list */
-#define RFD_SUSP     0x40	/* last: suspend RU after  */
-#define RFD_COMPL    0x80
-#define RFD_OK       0x20
-#define RFD_BUSY     0x40
-#define RFD_ERR_LEN  0x10     /* Length error (if enabled length-checking */
-#define RFD_ERR_CRC  0x08     /* CRC error */
-#define RFD_ERR_ALGN 0x04     /* Alignment error */
-#define RFD_ERR_RNR  0x02     /* status: receiver out of resources */
-#define RFD_ERR_OVR  0x01     /* DMA Overrun! */
-
-#define RFD_ERR_FTS  0x0080	/* Frame to short */
-#define RFD_ERR_NEOP 0x0040	/* No EOP flag (for bitstuffing only) */
-#define RFD_ERR_TRUN 0x0020	/* (82596 only/SF mode) indicates truncated frame */
-#define RFD_MATCHADD 0x0002     /* status: Destinationaddress !matches IA (only 82596) */
-#define RFD_COLLDET  0x0001	/* Detected collision during reception */
-
-/*
- * Receive Buffer Descriptor (RBD)
- */
-struct rbd_struct
-{
-  unsigned short status;	/* status word,number of used bytes in buff */
-  unsigned short next;		/* pointeroffset to next RBD */
-  char          *buffer;	/* receive buffer address pointer */
-  unsigned short size;		/* size of this buffer */
-  unsigned short zero_dummy;    /* dummy */
-};
-
-#define RBD_LAST	0x8000	/* last buffer */
-#define RBD_USED	0x4000	/* this buffer has data */
-#define RBD_MASK	0x3fff	/* size-mask for length */
-
-/*
- * Statusvalues for Commands/RFD
- */
-#define STAT_COMPL   0x8000	/* status: frame/command is complete */
-#define STAT_BUSY    0x4000	/* status: frame/command is busy */
-#define STAT_OK      0x2000	/* status: frame/command is ok */
-
-/*
- * Action-Commands
- */
-#define CMD_NOP		0x0000	/* NOP */
-#define CMD_IASETUP	0x0001	/* initial address setup command */
-#define CMD_CONFIGURE	0x0002	/* configure command */
-#define CMD_MCSETUP	0x0003	/* MC setup command */
-#define CMD_XMIT	0x0004	/* transmit command */
-#define CMD_TDR		0x0005	/* time domain reflectometer (TDR) command */
-#define CMD_DUMP	0x0006	/* dump command */
-#define CMD_DIAGNOSE	0x0007	/* diagnose command */
-
-/*
- * Action command bits
- */
-#define CMD_LAST	0x8000	/* indicates last command in the CBL */
-#define CMD_SUSPEND	0x4000	/* suspend CU after this CB */
-#define CMD_INT		0x2000	/* generate interrupt after execution */
-
-/*
- * NOP - command
- */
-struct nop_cmd_struct
-{
-  unsigned short cmd_status;	/* status of this command */
-  unsigned short cmd_cmd;       /* the command itself (+bits) */
-  unsigned short cmd_link;      /* offsetpointer to next command */
-};
-
-/*
- * IA Setup command
- */
-struct iasetup_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned char  iaddr[6];
-};
-
-/*
- * Configure command
- */
-struct configure_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned char  byte_cnt;   /* size of the config-cmd */
-  unsigned char  fifo;       /* fifo/recv monitor */
-  unsigned char  sav_bf;     /* save bad frames (bit7=1)*/
-  unsigned char  adr_len;    /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
-  unsigned char  priority;   /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
-  unsigned char  ifs;        /* inter frame spacing */
-  unsigned char  time_low;   /* slot time low */
-  unsigned char  time_high;  /* slot time high(0-2) and max. retries(4-7) */
-  unsigned char  promisc;    /* promisc-mode(0) , et al (1-7) */
-  unsigned char  carr_coll;  /* carrier(0-3)/collision(4-7) stuff */
-  unsigned char  fram_len;   /* minimal frame len */
-  unsigned char  dummy;	     /* dummy */
-};
-
-/*
- * Multicast Setup command
- */
-struct mcsetup_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned short mc_cnt;		/* number of bytes in the MC-List */
-  unsigned char  mc_list[0][6];  	/* pointer to 6 bytes entries */
-};
-
-/*
- * DUMP command
- */
-struct dump_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned short dump_offset;    /* pointeroffset to DUMP space */
-};
-
-/*
- * transmit command
- */
-struct transmit_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned short tbd_offset;	/* pointeroffset to TBD */
-  unsigned char  dest[6];       /* destination address of the frame */
-  unsigned short length;	/* user defined: 802.3 length / Ether type */
-};
-
-#define TCMD_ERRMASK     0x0fa0
-#define TCMD_MAXCOLLMASK 0x000f
-#define TCMD_MAXCOLL     0x0020
-#define TCMD_HEARTBEAT   0x0040
-#define TCMD_DEFERRED    0x0080
-#define TCMD_UNDERRUN    0x0100
-#define TCMD_LOSTCTS     0x0200
-#define TCMD_NOCARRIER   0x0400
-#define TCMD_LATECOLL    0x0800
-
-struct tdr_cmd_struct
-{
-  unsigned short cmd_status;
-  unsigned short cmd_cmd;
-  unsigned short cmd_link;
-  unsigned short status;
-};
-
-#define TDR_LNK_OK	0x8000	/* No link problem identified */
-#define TDR_XCVR_PRB	0x4000	/* indicates a transceiver problem */
-#define TDR_ET_OPN	0x2000	/* open, no correct termination */
-#define TDR_ET_SRT	0x1000	/* TDR detected a short circuit */
-#define TDR_TIMEMASK	0x07ff	/* mask for the time field */
-
-/*
- * Transmit Buffer Descriptor (TBD)
- */
-struct tbd_struct
-{
-  unsigned short size;		/* size + EOF-Flag(15) */
-  unsigned short next;          /* pointeroffset to next TBD */
-  char          *buffer;        /* pointer to buffer */
-};
-
-#define TBD_LAST 0x8000         /* EOF-Flag, indicates last buffer in list */
-
-
-
-