summaryrefslogtreecommitdiff
path: root/drivers/net/tlan.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/tlan.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/tlan.c')
-rw-r--r--drivers/net/tlan.c3304
1 files changed, 3304 insertions, 0 deletions
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
new file mode 100644
index 000000000000..a7ffa64502dd
--- /dev/null
+++ b/drivers/net/tlan.c
@@ -0,0 +1,3304 @@
+/*******************************************************************************
+ *
+ * Linux ThunderLAN Driver
+ *
+ * tlan.c
+ * by James Banks
+ *
+ * (C) 1997-1998 Caldera, Inc.
+ * (C) 1998 James Banks
+ * (C) 1999-2001 Torben Mathiasen
+ * (C) 2002 Samuel Chessman
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ ** This file is best viewed/edited with columns>=132.
+ *
+ ** Useful (if not required) reading:
+ *
+ * Texas Instruments, ThunderLAN Programmer's Guide,
+ * TI Literature Number SPWU013A
+ * available in PDF format from www.ti.com
+ * Level One, LXT901 and LXT970 Data Sheets
+ * available in PDF format from www.level1.com
+ * National Semiconductor, DP83840A Data Sheet
+ * available in PDF format from www.national.com
+ * Microchip Technology, 24C01A/02A/04A Data Sheet
+ * available in PDF format from www.microchip.com
+ *
+ * Change History
+ *
+ * Tigran Aivazian <tigran@sco.com>: TLan_PciProbe() now uses
+ * new PCI BIOS interface.
+ * Alan Cox <alan@redhat.com>: Fixed the out of memory
+ * handling.
+ *
+ * Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
+ *
+ * v1.1 Dec 20, 1999 - Removed linux version checking
+ * Patch from Tigran Aivazian.
+ * - v1.1 includes Alan's SMP updates.
+ * - We still have problems on SMP though,
+ * but I'm looking into that.
+ *
+ * v1.2 Jan 02, 2000 - Hopefully fixed the SMP deadlock.
+ * - Removed dependency of HZ being 100.
+ * - We now allow higher priority timers to
+ * overwrite timers like TLAN_TIMER_ACTIVITY
+ * Patch from John Cagle <john.cagle@compaq.com>.
+ * - Fixed a few compiler warnings.
+ *
+ * v1.3 Feb 04, 2000 - Fixed the remaining HZ issues.
+ * - Removed call to pci_present().
+ * - Removed SA_INTERRUPT flag from irq handler.
+ * - Added __init and __initdata to reduce resisdent
+ * code size.
+ * - Driver now uses module_init/module_exit.
+ * - Rewrote init_module and tlan_probe to
+ * share a lot more code. We now use tlan_probe
+ * with builtin and module driver.
+ * - Driver ported to new net API.
+ * - tlan.txt has been reworked to reflect current
+ * driver (almost)
+ * - Other minor stuff
+ *
+ * v1.4 Feb 10, 2000 - Updated with more changes required after Dave's
+ * network cleanup in 2.3.43pre7 (Tigran & myself)
+ * - Minor stuff.
+ *
+ * v1.5 March 22, 2000 - Fixed another timer bug that would hang the driver
+ * if no cable/link were present.
+ * - Cosmetic changes.
+ * - TODO: Port completely to new PCI/DMA API
+ * Auto-Neg fallback.
+ *
+ * v1.6 April 04, 2000 - Fixed driver support for kernel-parameters. Haven't
+ * tested it though, as the kernel support is currently
+ * broken (2.3.99p4p3).
+ * - Updated tlan.txt accordingly.
+ * - Adjusted minimum/maximum frame length.
+ * - There is now a TLAN website up at
+ * http://tlan.kernel.dk
+ *
+ * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
+ * reports PHY information when used with Donald
+ * Beckers userspace MII diagnostics utility.
+ *
+ * v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings.
+ * - Added link information to Auto-Neg and forced
+ * modes. When NIC operates with auto-neg the driver
+ * will report Link speed & duplex modes as well as
+ * link partner abilities. When forced link is used,
+ * the driver will report status of the established
+ * link.
+ * Please read tlan.txt for additional information.
+ * - Removed call to check_region(), and used
+ * return value of request_region() instead.
+ *
+ * v1.8a May 28, 2000 - Minor updates.
+ *
+ * v1.9 July 25, 2000 - Fixed a few remaining Full-Duplex issues.
+ * - Updated with timer fixes from Andrew Morton.
+ * - Fixed module race in TLan_Open.
+ * - Added routine to monitor PHY status.
+ * - Added activity led support for Proliant devices.
+ *
+ * v1.10 Aug 30, 2000 - Added support for EISA based tlan controllers
+ * like the Compaq NetFlex3/E.
+ * - Rewrote tlan_probe to better handle multiple
+ * bus probes. Probing and device setup is now
+ * done through TLan_Probe and TLan_init_one. Actual
+ * hardware probe is done with kernel API and
+ * TLan_EisaProbe.
+ * - Adjusted debug information for probing.
+ * - Fixed bug that would cause general debug information
+ * to be printed after driver removal.
+ * - Added transmit timeout handling.
+ * - Fixed OOM return values in tlan_probe.
+ * - Fixed possible mem leak in tlan_exit
+ * (now tlan_remove_one).
+ * - Fixed timer bug in TLan_phyMonitor.
+ * - This driver version is alpha quality, please
+ * send me any bug issues you may encounter.
+ *
+ * v1.11 Aug 31, 2000 - Do not try to register irq 0 if no irq line was
+ * set for EISA cards.
+ * - Added support for NetFlex3/E with nibble-rate
+ * 10Base-T PHY. This is untestet as I haven't got
+ * one of these cards.
+ * - Fixed timer being added twice.
+ * - Disabled PhyMonitoring by default as this is
+ * work in progress. Define MONITOR to enable it.
+ * - Now we don't display link info with PHYs that
+ * doesn't support it (level1).
+ * - Incresed tx_timeout beacuse of auto-neg.
+ * - Adjusted timers for forced speeds.
+ *
+ * v1.12 Oct 12, 2000 - Minor fixes (memleak, init, etc.)
+ *
+ * v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues
+ * when link can't be established.
+ * - Added the bbuf option as a kernel parameter.
+ * - Fixed ioaddr probe bug.
+ * - Fixed stupid deadlock with MII interrupts.
+ * - Added support for speed/duplex selection with
+ * multiple nics.
+ * - Added partly fix for TX Channel lockup with
+ * TLAN v1.0 silicon. This needs to be investigated
+ * further.
+ *
+ * v1.14 Dec 16, 2000 - Added support for servicing multiple frames per.
+ * interrupt. Thanks goes to
+ * Adam Keys <adam@ti.com>
+ * Denis Beaudoin <dbeaudoin@ti.com>
+ * for providing the patch.
+ * - Fixed auto-neg output when using multiple
+ * adapters.
+ * - Converted to use new taskq interface.
+ *
+ * v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.)
+ *
+ * Samuel Chessman <chessman@tux.org> New Maintainer!
+ *
+ * v1.15 Apr 4, 2002 - Correct operation when aui=1 to be
+ * 10T half duplex no loopback
+ * Thanks to Gunnar Eikman
+ *******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+
+#include "tlan.h"
+
+typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
+
+
+/* For removing EISA devices */
+static struct net_device *TLan_Eisa_Devices;
+
+static int TLanDevicesInstalled;
+
+/* Set speed, duplex and aui settings */
+static int aui[MAX_TLAN_BOARDS];
+static int duplex[MAX_TLAN_BOARDS];
+static int speed[MAX_TLAN_BOARDS];
+static int boards_found;
+
+MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
+MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
+MODULE_LICENSE("GPL");
+
+
+/* Define this to enable Link beat monitoring */
+#undef MONITOR
+
+/* Turn on debugging. See Documentation/networking/tlan.txt for details */
+static int debug;
+
+static int bbuf;
+static u8 *TLanPadBuffer;
+static dma_addr_t TLanPadBufferDMA;
+static char TLanSignature[] = "TLAN";
+static const char tlan_banner[] = "ThunderLAN driver v1.15\n";
+static int tlan_have_pci;
+static int tlan_have_eisa;
+
+static const char *media[] = {
+ "10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ",
+ "100baseTx-FD", "100baseT4", NULL
+};
+
+static struct board {
+ const char *deviceLabel;
+ u32 flags;
+ u16 addrOfs;
+} board_info[] = {
+ { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq NetFlex-3/P", TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq Netelligent Integrated 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
+ { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
+ { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
+ { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
+ { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
+ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
+};
+
+static struct pci_device_id tlan_pci_tbl[] = {
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
+
+static void TLan_EisaProbe( void );
+static void TLan_Eisa_Cleanup( void );
+static int TLan_Init( struct net_device * );
+static int TLan_Open( struct net_device *dev );
+static int TLan_StartTx( struct sk_buff *, struct net_device *);
+static irqreturn_t TLan_HandleInterrupt( int, void *, struct pt_regs *);
+static int TLan_Close( struct net_device *);
+static struct net_device_stats *TLan_GetStats( struct net_device *);
+static void TLan_SetMulticastList( struct net_device *);
+static int TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
+static int TLan_probe1( struct pci_dev *pdev, long ioaddr, int irq, int rev, const struct pci_device_id *ent);
+static void TLan_tx_timeout( struct net_device *dev);
+static int tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
+
+static u32 TLan_HandleInvalid( struct net_device *, u16 );
+static u32 TLan_HandleTxEOF( struct net_device *, u16 );
+static u32 TLan_HandleStatOverflow( struct net_device *, u16 );
+static u32 TLan_HandleRxEOF( struct net_device *, u16 );
+static u32 TLan_HandleDummy( struct net_device *, u16 );
+static u32 TLan_HandleTxEOC( struct net_device *, u16 );
+static u32 TLan_HandleStatusCheck( struct net_device *, u16 );
+static u32 TLan_HandleRxEOC( struct net_device *, u16 );
+
+static void TLan_Timer( unsigned long );
+
+static void TLan_ResetLists( struct net_device * );
+static void TLan_FreeLists( struct net_device * );
+static void TLan_PrintDio( u16 );
+static void TLan_PrintList( TLanList *, char *, int );
+static void TLan_ReadAndClearStats( struct net_device *, int );
+static void TLan_ResetAdapter( struct net_device * );
+static void TLan_FinishReset( struct net_device * );
+static void TLan_SetMac( struct net_device *, int areg, char *mac );
+
+static void TLan_PhyPrint( struct net_device * );
+static void TLan_PhyDetect( struct net_device * );
+static void TLan_PhyPowerDown( struct net_device * );
+static void TLan_PhyPowerUp( struct net_device * );
+static void TLan_PhyReset( struct net_device * );
+static void TLan_PhyStartLink( struct net_device * );
+static void TLan_PhyFinishAutoNeg( struct net_device * );
+#ifdef MONITOR
+static void TLan_PhyMonitor( struct net_device * );
+#endif
+
+/*
+static int TLan_PhyNop( struct net_device * );
+static int TLan_PhyInternalCheck( struct net_device * );
+static int TLan_PhyInternalService( struct net_device * );
+static int TLan_PhyDp83840aCheck( struct net_device * );
+*/
+
+static int TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
+static void TLan_MiiSendData( u16, u32, unsigned );
+static void TLan_MiiSync( u16 );
+static void TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
+
+static void TLan_EeSendStart( u16 );
+static int TLan_EeSendByte( u16, u8, int );
+static void TLan_EeReceiveByte( u16, u8 *, int );
+static int TLan_EeReadByte( struct net_device *, u8, u8 * );
+
+
+static void
+TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
+{
+ unsigned long addr = (unsigned long)skb;
+ tag->buffer[9].address = (u32)addr;
+ addr >>= 31; /* >>= 32 is undefined for 32bit arch, stupid C */
+ addr >>= 1;
+ tag->buffer[8].address = (u32)addr;
+}
+
+static struct sk_buff *
+TLan_GetSKB( struct tlan_list_tag *tag)
+{
+ unsigned long addr = tag->buffer[8].address;
+ addr <<= 31;
+ addr <<= 1;
+ addr |= tag->buffer[9].address;
+ return (struct sk_buff *) addr;
+}
+
+
+static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
+ TLan_HandleInvalid,
+ TLan_HandleTxEOF,
+ TLan_HandleStatOverflow,
+ TLan_HandleRxEOF,
+ TLan_HandleDummy,
+ TLan_HandleTxEOC,
+ TLan_HandleStatusCheck,
+ TLan_HandleRxEOC
+};
+
+static inline void
+TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+ if ( priv->timer.function != NULL &&
+ priv->timerType != TLAN_TIMER_ACTIVITY ) {
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+ priv->timer.function = &TLan_Timer;
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ priv->timer.data = (unsigned long) dev;
+ priv->timerSetAt = jiffies;
+ priv->timerType = type;
+ mod_timer(&priv->timer, jiffies + ticks);
+
+} /* TLan_SetTimer */
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver Primary Functions
+
+ These functions are more or less common to all Linux network drivers.
+
+******************************************************************************
+*****************************************************************************/
+
+
+
+
+
+ /***************************************************************
+ * tlan_remove_one
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * None
+ *
+ * Goes through the TLanDevices list and frees the device
+ * structs and memory associated with each device (lists
+ * and buffers). It also ureserves the IO port regions
+ * associated with this device.
+ *
+ **************************************************************/
+
+
+static void __devexit tlan_remove_one( struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata( pdev );
+ TLanPrivateInfo *priv = netdev_priv(dev);
+
+ unregister_netdev( dev );
+
+ if ( priv->dmaStorage ) {
+ pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
+ }
+
+#ifdef CONFIG_PCI
+ pci_release_regions(pdev);
+#endif
+
+ free_netdev( dev );
+
+ pci_set_drvdata( pdev, NULL );
+}
+
+static struct pci_driver tlan_driver = {
+ .name = "tlan",
+ .id_table = tlan_pci_tbl,
+ .probe = tlan_init_one,
+ .remove = __devexit_p(tlan_remove_one),
+};
+
+static int __init tlan_probe(void)
+{
+ static int pad_allocated;
+
+ printk(KERN_INFO "%s", tlan_banner);
+
+ TLanPadBuffer = (u8 *) pci_alloc_consistent(NULL, TLAN_MIN_FRAME_SIZE, &TLanPadBufferDMA);
+
+ if (TLanPadBuffer == NULL) {
+ printk(KERN_ERR "TLAN: Could not allocate memory for pad buffer.\n");
+ return -ENOMEM;
+ }
+
+ memset(TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE);
+ pad_allocated = 1;
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
+
+ /* Use new style PCI probing. Now the kernel will
+ do most of this for us */
+ pci_register_driver(&tlan_driver);
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
+ TLan_EisaProbe();
+
+ printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d EISA: %d\n",
+ TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
+ tlan_have_pci, tlan_have_eisa);
+
+ if (TLanDevicesInstalled == 0) {
+ pci_unregister_driver(&tlan_driver);
+ pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+
+static int __devinit tlan_init_one( struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ return TLan_probe1( pdev, -1, -1, 0, ent);
+}
+
+
+/*
+ ***************************************************************
+ * tlan_probe1
+ *
+ * Returns:
+ * 0 on success, error code on error
+ * Parms:
+ * none
+ *
+ * The name is lower case to fit in with all the rest of
+ * the netcard_probe names. This function looks for
+ * another TLan based adapter, setting it up with the
+ * allocated device struct if one is found.
+ * tlan_probe has been ported to the new net API and
+ * now allocates its own device structure. This function
+ * is also used by modules.
+ *
+ **************************************************************/
+
+static int __devinit TLan_probe1(struct pci_dev *pdev,
+ long ioaddr, int irq, int rev, const struct pci_device_id *ent )
+{
+
+ struct net_device *dev;
+ TLanPrivateInfo *priv;
+ u8 pci_rev;
+ u16 device_id;
+ int reg, rc = -ENODEV;
+
+ if (pdev) {
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, TLanSignature);
+ if (rc) {
+ printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
+ goto err_out;
+ }
+ }
+
+ dev = alloc_etherdev(sizeof(TLanPrivateInfo));
+ if (dev == NULL) {
+ printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ priv = netdev_priv(dev);
+
+ priv->pciDev = pdev;
+
+ /* Is this a PCI device? */
+ if (pdev) {
+ u32 pci_io_base = 0;
+
+ priv->adapter = &board_info[ent->driver_data];
+
+ rc = pci_set_dma_mask(pdev, 0xFFFFFFFF);
+ if (rc) {
+ printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
+ goto err_out_free_dev;
+ }
+
+ pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
+
+ for ( reg= 0; reg <= 5; reg ++ ) {
+ if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
+ pci_io_base = pci_resource_start(pdev, reg);
+ TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
+ pci_io_base);
+ break;
+ }
+ }
+ if (!pci_io_base) {
+ printk(KERN_ERR "TLAN: No IO mappings available\n");
+ rc = -EIO;
+ goto err_out_free_dev;
+ }
+
+ dev->base_addr = pci_io_base;
+ dev->irq = pdev->irq;
+ priv->adapterRev = pci_rev;
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, dev);
+
+ } else { /* EISA card */
+ /* This is a hack. We need to know which board structure
+ * is suited for this adapter */
+ device_id = inw(ioaddr + EISA_ID2);
+ priv->is_eisa = 1;
+ if (device_id == 0x20F1) {
+ priv->adapter = &board_info[13]; /* NetFlex-3/E */
+ priv->adapterRev = 23; /* TLAN 2.3 */
+ } else {
+ priv->adapter = &board_info[14];
+ priv->adapterRev = 10; /* TLAN 1.0 */
+ }
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ }
+
+ /* Kernel parameters */
+ if (dev->mem_start) {
+ priv->aui = dev->mem_start & 0x01;
+ priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 : (dev->mem_start & 0x06) >> 1;
+ priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0 : (dev->mem_start & 0x18) >> 3;
+
+ if (priv->speed == 0x1) {
+ priv->speed = TLAN_SPEED_10;
+ } else if (priv->speed == 0x2) {
+ priv->speed = TLAN_SPEED_100;
+ }
+ debug = priv->debug = dev->mem_end;
+ } else {
+ priv->aui = aui[boards_found];
+ priv->speed = speed[boards_found];
+ priv->duplex = duplex[boards_found];
+ priv->debug = debug;
+ }
+
+ /* This will be used when we get an adapter error from
+ * within our irq handler */
+ INIT_WORK(&priv->tlan_tqueue, (void *)(void*)TLan_tx_timeout, dev);
+
+ spin_lock_init(&priv->lock);
+
+ rc = TLan_Init(dev);
+ if (rc) {
+ printk(KERN_ERR "TLAN: Could not set up device.\n");
+ goto err_out_free_dev;
+ }
+
+ rc = register_netdev(dev);
+ if (rc) {
+ printk(KERN_ERR "TLAN: Could not register device.\n");
+ goto err_out_uninit;
+ }
+
+
+ TLanDevicesInstalled++;
+ boards_found++;
+
+ /* pdev is NULL if this is an EISA device */
+ if (pdev)
+ tlan_have_pci++;
+ else {
+ priv->nextDevice = TLan_Eisa_Devices;
+ TLan_Eisa_Devices = dev;
+ tlan_have_eisa++;
+ }
+
+ printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
+ dev->name,
+ (int) dev->irq,
+ (int) dev->base_addr,
+ priv->adapter->deviceLabel,
+ priv->adapterRev);
+ return 0;
+
+err_out_uninit:
+ pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage,
+ priv->dmaStorageDMA );
+err_out_free_dev:
+ free_netdev(dev);
+err_out_regions:
+#ifdef CONFIG_PCI
+ if (pdev)
+ pci_release_regions(pdev);
+#endif
+err_out:
+ if (pdev)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+
+static void TLan_Eisa_Cleanup(void)
+{
+ struct net_device *dev;
+ TLanPrivateInfo *priv;
+
+ while( tlan_have_eisa ) {
+ dev = TLan_Eisa_Devices;
+ priv = netdev_priv(dev);
+ if (priv->dmaStorage) {
+ pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
+ }
+ release_region( dev->base_addr, 0x10);
+ unregister_netdev( dev );
+ TLan_Eisa_Devices = priv->nextDevice;
+ free_netdev( dev );
+ tlan_have_eisa--;
+ }
+}
+
+
+static void __exit tlan_exit(void)
+{
+ pci_unregister_driver(&tlan_driver);
+
+ if (tlan_have_eisa)
+ TLan_Eisa_Cleanup();
+
+ pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
+
+}
+
+
+/* Module loading/unloading */
+module_init(tlan_probe);
+module_exit(tlan_exit);
+
+
+
+ /**************************************************************
+ * TLan_EisaProbe
+ *
+ * Returns: 0 on success, 1 otherwise
+ *
+ * Parms: None
+ *
+ *
+ * This functions probes for EISA devices and calls
+ * TLan_probe1 when one is found.
+ *
+ *************************************************************/
+
+static void __init TLan_EisaProbe (void)
+{
+ long ioaddr;
+ int rc = -ENODEV;
+ int irq;
+ u16 device_id;
+
+ if (!EISA_bus) {
+ TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
+ return;
+ }
+
+ /* Loop through all slots of the EISA bus */
+ for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
+
+ TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
+ TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
+
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
+ (int) ioaddr);
+ if (request_region(ioaddr, 0x10, TLanSignature) == NULL)
+ goto out;
+
+ if (inw(ioaddr + EISA_ID) != 0x110E) {
+ release_region(ioaddr, 0x10);
+ goto out;
+ }
+
+ device_id = inw(ioaddr + EISA_ID2);
+ if (device_id != 0x20F1 && device_id != 0x40F1) {
+ release_region (ioaddr, 0x10);
+ goto out;
+ }
+
+ if (inb(ioaddr + EISA_CR) != 0x1) { /* Check if adapter is enabled */
+ release_region (ioaddr, 0x10);
+ goto out2;
+ }
+
+ if (debug == 0x10)
+ printk("Found one\n");
+
+
+ /* Get irq from board */
+ switch (inb(ioaddr + 0xCC0)) {
+ case(0x10):
+ irq=5;
+ break;
+ case(0x20):
+ irq=9;
+ break;
+ case(0x40):
+ irq=10;
+ break;
+ case(0x80):
+ irq=11;
+ break;
+ default:
+ goto out;
+ }
+
+
+ /* Setup the newly found eisa adapter */
+ rc = TLan_probe1( NULL, ioaddr, irq,
+ 12, NULL);
+ continue;
+
+ out:
+ if (debug == 0x10)
+ printk("None found\n");
+ continue;
+
+ out2: if (debug == 0x10)
+ printk("Card found but it is not enabled, skipping\n");
+ continue;
+
+ }
+
+} /* TLan_EisaProbe */
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void TLan_Poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ TLan_HandleInterrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+
+
+
+ /***************************************************************
+ * TLan_Init
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev The structure of the device to be
+ * init'ed.
+ *
+ * This function completes the initialization of the
+ * device structure and driver. It reserves the IO
+ * addresses, allocates memory for the lists and bounce
+ * buffers, retrieves the MAC address from the eeprom
+ * and assignes the device's methods.
+ *
+ **************************************************************/
+
+static int TLan_Init( struct net_device *dev )
+{
+ int dma_size;
+ int err;
+ int i;
+ TLanPrivateInfo *priv;
+
+ priv = netdev_priv(dev);
+
+ if ( bbuf ) {
+ dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
+ * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
+ } else {
+ dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
+ * ( sizeof(TLanList) );
+ }
+ priv->dmaStorage = pci_alloc_consistent(priv->pciDev, dma_size, &priv->dmaStorageDMA);
+ priv->dmaSize = dma_size;
+
+ if ( priv->dmaStorage == NULL ) {
+ printk(KERN_ERR "TLAN: Could not allocate lists and buffers for %s.\n",
+ dev->name );
+ return -ENOMEM;
+ }
+ memset( priv->dmaStorage, 0, dma_size );
+ priv->rxList = (TLanList *)
+ ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
+ priv->rxListDMA = ( ( ( (u32) priv->dmaStorageDMA ) + 7 ) & 0xFFFFFFF8 );
+ priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
+ priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
+ if ( bbuf ) {
+ priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
+ priv->rxBufferDMA =priv->txListDMA + sizeof(TLanList) * TLAN_NUM_TX_LISTS;
+ priv->txBuffer = priv->rxBuffer + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+ priv->txBufferDMA = priv->rxBufferDMA + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+ }
+
+ err = 0;
+ for ( i = 0; i < 6 ; i++ )
+ err |= TLan_EeReadByte( dev,
+ (u8) priv->adapter->addrOfs + i,
+ (u8 *) &dev->dev_addr[i] );
+ if ( err ) {
+ printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
+ dev->name,
+ err );
+ }
+ dev->addr_len = 6;
+
+ netif_carrier_off(dev);
+
+ /* Device methods */
+ dev->open = &TLan_Open;
+ dev->hard_start_xmit = &TLan_StartTx;
+ dev->stop = &TLan_Close;
+ dev->get_stats = &TLan_GetStats;
+ dev->set_multicast_list = &TLan_SetMulticastList;
+ dev->do_ioctl = &TLan_ioctl;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &TLan_Poll;
+#endif
+ dev->tx_timeout = &TLan_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ return 0;
+
+} /* TLan_Init */
+
+
+
+
+ /***************************************************************
+ * TLan_Open
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev Structure of device to be opened.
+ *
+ * This routine puts the driver and TLAN adapter in a
+ * state where it is ready to send and receive packets.
+ * It allocates the IRQ, resets and brings the adapter
+ * out of reset, and allows interrupts. It also delays
+ * the startup for autonegotiation or sends a Rx GO
+ * command to the adapter, as appropriate.
+ *
+ **************************************************************/
+
+static int TLan_Open( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int err;
+
+ priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
+ err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
+
+ if ( err ) {
+ printk(KERN_ERR "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
+ return err;
+ }
+
+ init_timer(&priv->timer);
+ netif_start_queue(dev);
+
+ /* NOTE: It might not be necessary to read the stats before a
+ reset if you don't care what the values are.
+ */
+ TLan_ResetLists( dev );
+ TLan_ReadAndClearStats( dev, TLAN_IGNORE );
+ TLan_ResetAdapter( dev );
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", dev->name, priv->tlanRev );
+
+ return 0;
+
+} /* TLan_Open */
+
+
+
+ /**************************************************************
+ * TLan_ioctl
+ *
+ * Returns:
+ * 0 on success, error code otherwise
+ * Params:
+ * dev structure of device to receive ioctl.
+ *
+ * rq ifreq structure to hold userspace data.
+ *
+ * cmd ioctl command.
+ *
+ *
+ *************************************************************/
+
+static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(rq);
+ u32 phy = priv->phy[priv->phyNum];
+
+ if (!priv->phyOnline)
+ return -EAGAIN;
+
+ switch(cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = phy;
+
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ TLan_MiiReadReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, &data->val_out);
+ return 0;
+
+
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ TLan_MiiWriteReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+} /* tlan_ioctl */
+
+
+ /***************************************************************
+ * TLan_tx_timeout
+ *
+ * Returns: nothing
+ *
+ * Params:
+ * dev structure of device which timed out
+ * during transmit.
+ *
+ **************************************************************/
+
+static void TLan_tx_timeout(struct net_device *dev)
+{
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
+
+ /* Ok so we timed out, lets see what we can do about it...*/
+ TLan_FreeLists( dev );
+ TLan_ResetLists( dev );
+ TLan_ReadAndClearStats( dev, TLAN_IGNORE );
+ TLan_ResetAdapter( dev );
+ dev->trans_start = jiffies;
+ netif_wake_queue( dev );
+
+}
+
+
+
+ /***************************************************************
+ * TLan_StartTx
+ *
+ * Returns:
+ * 0 on success, non-zero on failure.
+ * Parms:
+ * skb A pointer to the sk_buff containing the
+ * frame to be sent.
+ * dev The device to send the data on.
+ *
+ * This function adds a frame to the Tx list to be sent
+ * ASAP. First it verifies that the adapter is ready and
+ * there is room in the queue. Then it sets up the next
+ * available list, copies the frame to the corresponding
+ * buffer. If the adapter Tx channel is idle, it gives
+ * the adapter a Tx Go command on the list, otherwise it
+ * sets the forward address of the previous list to point
+ * to this one. Then it frees the sk_buff.
+ *
+ **************************************************************/
+
+static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ TLanList *tail_list;
+ dma_addr_t tail_list_phys;
+ u8 *tail_buffer;
+ int pad;
+ unsigned long flags;
+
+ if ( ! priv->phyOnline ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", dev->name );
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ tail_list = priv->txList + priv->txTail;
+ tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
+
+ if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", dev->name, priv->txHead, priv->txTail );
+ netif_stop_queue(dev);
+ priv->txBusyCount++;
+ return 1;
+ }
+
+ tail_list->forward = 0;
+
+ if ( bbuf ) {
+ tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
+ memcpy( tail_buffer, skb->data, skb->len );
+ } else {
+ tail_list->buffer[0].address = pci_map_single(priv->pciDev, skb->data, skb->len, PCI_DMA_TODEVICE);
+ TLan_StoreSKB(tail_list, skb);
+ }
+
+ pad = TLAN_MIN_FRAME_SIZE - skb->len;
+
+ if ( pad > 0 ) {
+ tail_list->frameSize = (u16) skb->len + pad;
+ tail_list->buffer[0].count = (u32) skb->len;
+ tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
+ tail_list->buffer[1].address = TLanPadBufferDMA;
+ } else {
+ tail_list->frameSize = (u16) skb->len;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+ tail_list->buffer[1].count = 0;
+ tail_list->buffer[1].address = 0;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ tail_list->cStat = TLAN_CSTAT_READY;
+ if ( ! priv->txInProgress ) {
+ priv->txInProgress = 1;
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
+ outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
+ } else {
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n", priv->txTail );
+ if ( priv->txTail == 0 ) {
+ ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = tail_list_phys;
+ } else {
+ ( priv->txList + ( priv->txTail - 1 ) )->forward = tail_list_phys;
+ }
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
+
+ if ( bbuf )
+ dev_kfree_skb_any(skb);
+
+ dev->trans_start = jiffies;
+ return 0;
+
+} /* TLan_StartTx */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleInterrupt
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * irq The line on which the interrupt
+ * occurred.
+ * dev_id A pointer to the device assigned to
+ * this irq line.
+ * regs ???
+ *
+ * This function handles an interrupt generated by its
+ * assigned TLAN adapter. The function deactivates
+ * interrupts on its adapter, records the type of
+ * interrupt, executes the appropriate subhandler, and
+ * acknowdges the interrupt to the adapter (thus
+ * re-enabling adapter interrupts.
+ *
+ **************************************************************/
+
+static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 ack;
+ struct net_device *dev;
+ u32 host_cmd;
+ u16 host_int;
+ int type;
+ TLanPrivateInfo *priv;
+
+ dev = dev_id;
+ priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+
+ host_int = inw( dev->base_addr + TLAN_HOST_INT );
+ outw( host_int, dev->base_addr + TLAN_HOST_INT );
+
+ type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
+
+ ack = TLanIntVector[type]( dev, host_int );
+
+ if ( ack ) {
+ host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
+ outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
+ }
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+} /* TLan_HandleInterrupts */
+
+
+
+
+ /***************************************************************
+ * TLan_Close
+ *
+ * Returns:
+ * An error code.
+ * Parms:
+ * dev The device structure of the device to
+ * close.
+ *
+ * This function shuts down the adapter. It records any
+ * stats, puts the adapter into reset state, deactivates
+ * its time as needed, and frees the irq it is using.
+ *
+ **************************************************************/
+
+static int TLan_Close(struct net_device *dev)
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ priv->neg_be_verbose = 0;
+
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+ outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+ if ( priv->timer.function != NULL ) {
+ del_timer_sync( &priv->timer );
+ priv->timer.function = NULL;
+ }
+
+ free_irq( dev->irq, dev );
+ TLan_FreeLists( dev );
+ TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
+
+ return 0;
+
+} /* TLan_Close */
+
+
+
+
+ /***************************************************************
+ * TLan_GetStats
+ *
+ * Returns:
+ * A pointer to the device's statistics structure.
+ * Parms:
+ * dev The device structure to return the
+ * stats for.
+ *
+ * This function updates the devices statistics by reading
+ * the TLAN chip's onboard registers. Then it returns the
+ * address of the statistics structure.
+ *
+ **************************************************************/
+
+static struct net_device_stats *TLan_GetStats( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int i;
+
+ /* Should only read stats if open ? */
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, priv->rxEocCount );
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, priv->txBusyCount );
+ if ( debug & TLAN_DEBUG_GNRL ) {
+ TLan_PrintDio( dev->base_addr );
+ TLan_PhyPrint( dev );
+ }
+ if ( debug & TLAN_DEBUG_LIST ) {
+ for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
+ TLan_PrintList( priv->rxList + i, "RX", i );
+ for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
+ TLan_PrintList( priv->txList + i, "TX", i );
+ }
+
+ return ( &( (TLanPrivateInfo *) netdev_priv(dev) )->stats );
+
+} /* TLan_GetStats */
+
+
+
+
+ /***************************************************************
+ * TLan_SetMulticastList
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure to set the
+ * multicast list for.
+ *
+ * This function sets the TLAN adaptor to various receive
+ * modes. If the IFF_PROMISC flag is set, promiscuous
+ * mode is acitviated. Otherwise, promiscuous mode is
+ * turned off. If the IFF_ALLMULTI flag is set, then
+ * the hash table is set to receive all group addresses.
+ * Otherwise, the first three multicast addresses are
+ * stored in AREG_1-3, and the rest are selected via the
+ * hash table, as necessary.
+ *
+ **************************************************************/
+
+static void TLan_SetMulticastList( struct net_device *dev )
+{
+ struct dev_mc_list *dmi = dev->mc_list;
+ u32 hash1 = 0;
+ u32 hash2 = 0;
+ int i;
+ u32 offset;
+ u8 tmp;
+
+ if ( dev->flags & IFF_PROMISC ) {
+ tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
+ } else {
+ tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
+ if ( dev->flags & IFF_ALLMULTI ) {
+ for ( i = 0; i < 3; i++ )
+ TLan_SetMac( dev, i + 1, NULL );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
+ } else {
+ for ( i = 0; i < dev->mc_count; i++ ) {
+ if ( i < 3 ) {
+ TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
+ } else {
+ offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
+ if ( offset < 32 )
+ hash1 |= ( 1 << offset );
+ else
+ hash2 |= ( 1 << ( offset - 32 ) );
+ }
+ dmi = dmi->next;
+ }
+ for ( ; i < 3; i++ )
+ TLan_SetMac( dev, i + 1, NULL );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
+ }
+ }
+
+} /* TLan_SetMulticastList */
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver Interrupt Vectors and Table
+
+ Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
+ Programmer's Guide" for more informations on handling interrupts
+ generated by TLAN based adapters.
+
+******************************************************************************
+*****************************************************************************/
+
+
+ /***************************************************************
+ * TLan_HandleInvalid
+ *
+ * Returns:
+ * 0
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles invalid interrupts. This should
+ * never happen unless some other adapter is trying to use
+ * the IRQ line assigned to the device.
+ *
+ **************************************************************/
+
+u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
+{
+ /* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */
+ return 0;
+
+} /* TLan_HandleInvalid */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleTxEOF
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Tx EOF interrupts which are raised
+ * by the adapter when it has completed sending the
+ * contents of a buffer. If detemines which list/buffer
+ * was completed and resets it. If the buffer was the last
+ * in the channel (EOC), then the function checks to see if
+ * another buffer is ready to send, and if so, sends a Tx
+ * Go command. Finally, the driver activates/continues the
+ * activity LED.
+ *
+ **************************************************************/
+
+u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int eoc = 0;
+ TLanList *head_list;
+ dma_addr_t head_list_phys;
+ u32 ack = 0;
+ u16 tmpCStat;
+
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+ head_list = priv->txList + priv->txHead;
+
+ while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
+ ack++;
+ if ( ! bbuf ) {
+ struct sk_buff *skb = TLan_GetSKB(head_list);
+ pci_unmap_single(priv->pciDev, head_list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(skb);
+ head_list->buffer[8].address = 0;
+ head_list->buffer[9].address = 0;
+ }
+
+ if ( tmpCStat & TLAN_CSTAT_EOC )
+ eoc = 1;
+
+ priv->stats.tx_bytes += head_list->frameSize;
+
+ head_list->cStat = TLAN_CSTAT_UNUSED;
+ netif_start_queue(dev);
+ CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS );
+ head_list = priv->txList + priv->txHead;
+ }
+
+ if (!ack)
+ printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
+
+ if ( eoc ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+ head_list = priv->txList + priv->txHead;
+ head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
+ if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->txInProgress = 0;
+ }
+ }
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ if ( priv->timer.function == NULL ) {
+ priv->timer.function = &TLan_Timer;
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timerSetAt = jiffies;
+ priv->timerType = TLAN_TIMER_ACTIVITY;
+ add_timer(&priv->timer);
+ } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
+ priv->timerSetAt = jiffies;
+ }
+ }
+
+ return ack;
+
+} /* TLan_HandleTxEOF */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleStatOverflow
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Statistics Overflow interrupt
+ * which means that one or more of the TLAN statistics
+ * registers has reached 1/2 capacity and needs to be read.
+ *
+ **************************************************************/
+
+u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
+{
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+
+ return 1;
+
+} /* TLan_HandleStatOverflow */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleRxEOF
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Rx EOF interrupt which
+ * indicates a frame has been received by the adapter from
+ * the net and the frame has been transferred to memory.
+ * The function determines the bounce buffer the frame has
+ * been loaded into, creates a new sk_buff big enough to
+ * hold the frame, and sends it to protocol stack. It
+ * then resets the used buffer and appends it to the end
+ * of the list. If the frame was the last in the Rx
+ * channel (EOC), the function restarts the receive channel
+ * by sending an Rx Go command to the adapter. Then it
+ * activates/continues the activity LED.
+ *
+ **************************************************************/
+
+u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u32 ack = 0;
+ int eoc = 0;
+ u8 *head_buffer;
+ TLanList *head_list;
+ struct sk_buff *skb;
+ TLanList *tail_list;
+ void *t;
+ u32 frameSize;
+ u16 tmpCStat;
+ dma_addr_t head_list_phys;
+
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+ head_list = priv->rxList + priv->rxHead;
+ head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
+
+ while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
+ frameSize = head_list->frameSize;
+ ack++;
+ if (tmpCStat & TLAN_CSTAT_EOC)
+ eoc = 1;
+
+ if (bbuf) {
+ skb = dev_alloc_skb(frameSize + 7);
+ if (skb == NULL)
+ printk(KERN_INFO "TLAN: Couldn't allocate memory for received data.\n");
+ else {
+ head_buffer = priv->rxBuffer + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ t = (void *) skb_put(skb, frameSize);
+
+ priv->stats.rx_bytes += head_list->frameSize;
+
+ memcpy( t, head_buffer, frameSize );
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
+ }
+ } else {
+ struct sk_buff *new_skb;
+
+ /*
+ * I changed the algorithm here. What we now do
+ * is allocate the new frame. If this fails we
+ * simply recycle the frame.
+ */
+
+ new_skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
+
+ if ( new_skb != NULL ) {
+ skb = TLan_GetSKB(head_list);
+ pci_unmap_single(priv->pciDev, head_list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ skb_trim( skb, frameSize );
+
+ priv->stats.rx_bytes += frameSize;
+
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
+
+ new_skb->dev = dev;
+ skb_reserve( new_skb, 2 );
+ t = (void *) skb_put( new_skb, TLAN_MAX_FRAME_SIZE );
+ head_list->buffer[0].address = pci_map_single(priv->pciDev, new_skb->data, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ head_list->buffer[8].address = (u32) t;
+ TLan_StoreSKB(head_list, new_skb);
+ } else
+ printk(KERN_WARNING "TLAN: Couldn't allocate memory for received data.\n" );
+ }
+
+ head_list->forward = 0;
+ head_list->cStat = 0;
+ tail_list = priv->rxList + priv->rxTail;
+ tail_list->forward = head_list_phys;
+
+ CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
+ CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
+ head_list = priv->rxList + priv->rxHead;
+ head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
+ }
+
+ if (!ack)
+ printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
+
+
+
+
+ if ( eoc ) {
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+ head_list = priv->rxList + priv->rxHead;
+ head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rxEocCount++;
+ }
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ if ( priv->timer.function == NULL ) {
+ priv->timer.function = &TLan_Timer;
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timerSetAt = jiffies;
+ priv->timerType = TLAN_TIMER_ACTIVITY;
+ add_timer(&priv->timer);
+ } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
+ priv->timerSetAt = jiffies;
+ }
+ }
+
+ dev->last_rx = jiffies;
+
+ return ack;
+
+} /* TLan_HandleRxEOF */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleDummy
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Dummy interrupt, which is
+ * raised whenever a test interrupt is generated by setting
+ * the Req_Int bit of HOST_CMD to 1.
+ *
+ **************************************************************/
+
+u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
+{
+ printk( "TLAN: Test interrupt on %s.\n", dev->name );
+ return 1;
+
+} /* TLan_HandleDummy */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleTxEOC
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurrences by
+ * reading the CSTAT member of the list structure. Tx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * functionality, so process EOC events if this is the
+ * case.
+ *
+ **************************************************************/
+
+u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ TLanList *head_list;
+ dma_addr_t head_list_phys;
+ u32 ack = 1;
+
+ host_int = 0;
+ if ( priv->tlanRev < 0x30 ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", priv->txHead, priv->txTail );
+ head_list = priv->txList + priv->txHead;
+ head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
+ if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+ netif_stop_queue(dev);
+ outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->txInProgress = 0;
+ }
+ }
+
+ return ack;
+
+} /* TLan_HandleTxEOC */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleStatusCheck
+ *
+ * Returns:
+ * 0 if Adapter check, 1 if Network Status check.
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Adapter Check/Network Status
+ * interrupts generated by the adapter. It checks the
+ * vector in the HOST_INT register to determine if it is
+ * an Adapter Check interrupt. If so, it resets the
+ * adapter. Otherwise it clears the status registers
+ * and services the PHY.
+ *
+ **************************************************************/
+
+u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u32 ack;
+ u32 error;
+ u8 net_sts;
+ u32 phy;
+ u16 tlphy_ctl;
+ u16 tlphy_sts;
+
+ ack = 1;
+ if ( host_int & TLAN_HI_IV_MASK ) {
+ netif_stop_queue( dev );
+ error = inl( dev->base_addr + TLAN_CH_PARM );
+ printk( "TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error );
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+ outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+
+ schedule_work(&priv->tlan_tqueue);
+
+ netif_wake_queue(dev);
+ ack = 0;
+ } else {
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
+ phy = priv->phy[priv->phyNum];
+
+ net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
+ if ( net_sts ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", dev->name, (unsigned) net_sts );
+ }
+ if ( ( net_sts & TLAN_NET_STS_MIRQ ) && ( priv->phyNum == 0 ) ) {
+ TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
+ TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
+ if ( ! ( tlphy_sts & TLAN_TS_POLOK ) && ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+ tlphy_ctl |= TLAN_TC_SWAPOL;
+ TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
+ } else if ( ( tlphy_sts & TLAN_TS_POLOK ) && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+ tlphy_ctl &= ~TLAN_TC_SWAPOL;
+ TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
+ }
+
+ if (debug) {
+ TLan_PhyPrint( dev );
+ }
+ }
+ }
+
+ return ack;
+
+} /* TLan_HandleStatusCheck */
+
+
+
+
+ /***************************************************************
+ * TLan_HandleRxEOC
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurrences by
+ * reading the CSTAT member of the list structure. Rx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * CSTAT member or a INTDIS register, so if this chip is
+ * pre-3.0, process EOC interrupts normally.
+ *
+ **************************************************************/
+
+u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ dma_addr_t head_list_phys;
+ u32 ack = 1;
+
+ if ( priv->tlanRev < 0x30 ) {
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", priv->rxHead, priv->rxTail );
+ head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
+ outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rxEocCount++;
+ }
+
+ return ack;
+
+} /* TLan_HandleRxEOC */
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver Timer Function
+
+******************************************************************************
+*****************************************************************************/
+
+
+ /***************************************************************
+ * TLan_Timer
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * data A value given to add timer when
+ * add_timer was called.
+ *
+ * This function handles timed functionality for the
+ * TLAN driver. The two current timer uses are for
+ * delaying for autonegotionation and driving the ACT LED.
+ * - Autonegotiation requires being allowed about
+ * 2 1/2 seconds before attempting to transmit a
+ * packet. It would be a very bad thing to hang
+ * the kernel this long, so the driver doesn't
+ * allow transmission 'til after this time, for
+ * certain PHYs. It would be much nicer if all
+ * PHYs were interrupt-capable like the internal
+ * PHY.
+ * - The ACT LED, which shows adapter activity, is
+ * driven by the driver, and so must be left on
+ * for a short period to power up the LED so it
+ * can be seen. This delay can be changed by
+ * changing the TLAN_TIMER_ACT_DELAY in tlan.h,
+ * if desired. 100 ms produces a slightly
+ * sluggish response.
+ *
+ **************************************************************/
+
+void TLan_Timer( unsigned long data )
+{
+ struct net_device *dev = (struct net_device *) data;
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u32 elapsed;
+ unsigned long flags = 0;
+
+ priv->timer.function = NULL;
+
+ switch ( priv->timerType ) {
+#ifdef MONITOR
+ case TLAN_TIMER_LINK_BEAT:
+ TLan_PhyMonitor( dev );
+ break;
+#endif
+ case TLAN_TIMER_PHY_PDOWN:
+ TLan_PhyPowerDown( dev );
+ break;
+ case TLAN_TIMER_PHY_PUP:
+ TLan_PhyPowerUp( dev );
+ break;
+ case TLAN_TIMER_PHY_RESET:
+ TLan_PhyReset( dev );
+ break;
+ case TLAN_TIMER_PHY_START_LINK:
+ TLan_PhyStartLink( dev );
+ break;
+ case TLAN_TIMER_PHY_FINISH_AN:
+ TLan_PhyFinishAutoNeg( dev );
+ break;
+ case TLAN_TIMER_FINISH_RESET:
+ TLan_FinishReset( dev );
+ break;
+ case TLAN_TIMER_ACTIVITY:
+ spin_lock_irqsave(&priv->lock, flags);
+ if ( priv->timer.function == NULL ) {
+ elapsed = jiffies - priv->timerSetAt;
+ if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+ } else {
+ priv->timer.function = &TLan_Timer;
+ priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ add_timer( &priv->timer );
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ default:
+ break;
+ }
+
+} /* TLan_Timer */
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver Adapter Related Routines
+
+******************************************************************************
+*****************************************************************************/
+
+
+ /***************************************************************
+ * TLan_ResetLists
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure with the list
+ * stuctures to be reset.
+ *
+ * This routine sets the variables associated with managing
+ * the TLAN lists to their initial values.
+ *
+ **************************************************************/
+
+void TLan_ResetLists( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int i;
+ TLanList *list;
+ dma_addr_t list_phys;
+ struct sk_buff *skb;
+ void *t = NULL;
+
+ priv->txHead = 0;
+ priv->txTail = 0;
+ for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
+ list = priv->txList + i;
+ list->cStat = TLAN_CSTAT_UNUSED;
+ if ( bbuf ) {
+ list->buffer[0].address = priv->txBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
+ } else {
+ list->buffer[0].address = 0;
+ }
+ list->buffer[2].count = 0;
+ list->buffer[2].address = 0;
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+
+ priv->rxHead = 0;
+ priv->rxTail = TLAN_NUM_RX_LISTS - 1;
+ for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
+ list = priv->rxList + i;
+ list_phys = priv->rxListDMA + sizeof(TLanList) * i;
+ list->cStat = TLAN_CSTAT_READY;
+ list->frameSize = TLAN_MAX_FRAME_SIZE;
+ list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
+ if ( bbuf ) {
+ list->buffer[0].address = priv->rxBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
+ } else {
+ skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
+ if ( skb == NULL ) {
+ printk( "TLAN: Couldn't allocate memory for received data.\n" );
+ /* If this ever happened it would be a problem */
+ } else {
+ skb->dev = dev;
+ skb_reserve( skb, 2 );
+ t = (void *) skb_put( skb, TLAN_MAX_FRAME_SIZE );
+ }
+ list->buffer[0].address = pci_map_single(priv->pciDev, t, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ list->buffer[8].address = (u32) t;
+ TLan_StoreSKB(list, skb);
+ }
+ list->buffer[1].count = 0;
+ list->buffer[1].address = 0;
+ if ( i < TLAN_NUM_RX_LISTS - 1 )
+ list->forward = list_phys + sizeof(TLanList);
+ else
+ list->forward = 0;
+ }
+
+} /* TLan_ResetLists */
+
+
+void TLan_FreeLists( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int i;
+ TLanList *list;
+ struct sk_buff *skb;
+
+ if ( ! bbuf ) {
+ for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
+ list = priv->txList + i;
+ skb = TLan_GetSKB(list);
+ if ( skb ) {
+ pci_unmap_single(priv->pciDev, list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_any( skb );
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+ }
+
+ for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
+ list = priv->rxList + i;
+ skb = TLan_GetSKB(list);
+ if ( skb ) {
+ pci_unmap_single(priv->pciDev, list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any( skb );
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+ }
+ }
+} /* TLan_FreeLists */
+
+
+
+
+ /***************************************************************
+ * TLan_PrintDio
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base Base IO port of the device of
+ * which to print DIO registers.
+ *
+ * This function prints out all the internal (DIO)
+ * registers of a TLAN chip.
+ *
+ **************************************************************/
+
+void TLan_PrintDio( u16 io_base )
+{
+ u32 data0, data1;
+ int i;
+
+ printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n", io_base );
+ printk( "TLAN: Off. +0 +4\n" );
+ for ( i = 0; i < 0x4C; i+= 8 ) {
+ data0 = TLan_DioRead32( io_base, i );
+ data1 = TLan_DioRead32( io_base, i + 0x4 );
+ printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
+ }
+
+} /* TLan_PrintDio */
+
+
+
+
+ /***************************************************************
+ * TLan_PrintList
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * list A pointer to the TLanList structure to
+ * be printed.
+ * type A string to designate type of list,
+ * "Rx" or "Tx".
+ * num The index of the list.
+ *
+ * This function prints out the contents of the list
+ * pointed to by the list parameter.
+ *
+ **************************************************************/
+
+void TLan_PrintList( TLanList *list, char *type, int num)
+{
+ int i;
+
+ printk( "TLAN: %s List %d at 0x%08x\n", type, num, (u32) list );
+ printk( "TLAN: Forward = 0x%08x\n", list->forward );
+ printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
+ printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
+ /* for ( i = 0; i < 10; i++ ) { */
+ for ( i = 0; i < 2; i++ ) {
+ printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffer[i].count, list->buffer[i].address );
+ }
+
+} /* TLan_PrintList */
+
+
+
+
+ /***************************************************************
+ * TLan_ReadAndClearStats
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to which to read stats.
+ * record Flag indicating whether to add
+ *
+ * This functions reads all the internal status registers
+ * of the TLAN chip, which clears them as a side effect.
+ * It then either adds the values to the device's status
+ * struct, or discards them, depending on whether record
+ * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
+ *
+ **************************************************************/
+
+void TLan_ReadAndClearStats( struct net_device *dev, int record )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u32 tx_good, tx_under;
+ u32 rx_good, rx_over;
+ u32 def_tx, crc, code;
+ u32 multi_col, single_col;
+ u32 excess_col, late_col, loss;
+
+ outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ tx_good = inb( dev->base_addr + TLAN_DIO_DATA );
+ tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+ tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ rx_good = inb( dev->base_addr + TLAN_DIO_DATA );
+ rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+ rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
+ def_tx = inb( dev->base_addr + TLAN_DIO_DATA );
+ def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+ code = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ multi_col = inb( dev->base_addr + TLAN_DIO_DATA );
+ multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+ single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
+
+ outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
+ late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
+ loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+
+ if ( record ) {
+ priv->stats.rx_packets += rx_good;
+ priv->stats.rx_errors += rx_over + crc + code;
+ priv->stats.tx_packets += tx_good;
+ priv->stats.tx_errors += tx_under + loss;
+ priv->stats.collisions += multi_col + single_col + excess_col + late_col;
+
+ priv->stats.rx_over_errors += rx_over;
+ priv->stats.rx_crc_errors += crc;
+ priv->stats.rx_frame_errors += code;
+
+ priv->stats.tx_aborted_errors += tx_under;
+ priv->stats.tx_carrier_errors += loss;
+ }
+
+} /* TLan_ReadAndClearStats */
+
+
+
+
+ /***************************************************************
+ * TLan_Reset
+ *
+ * Returns:
+ * 0
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to be reset.
+ *
+ * This function resets the adapter and it's physical
+ * device. See Chap. 3, pp. 9-10 of the "ThunderLAN
+ * Programmer's Guide" for details. The routine tries to
+ * implement what is detailed there, though adjustments
+ * have been made.
+ *
+ **************************************************************/
+
+void
+TLan_ResetAdapter( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ int i;
+ u32 addr;
+ u32 data;
+ u8 data8;
+
+ priv->tlanFullDuplex = FALSE;
+ priv->phyOnline=0;
+ netif_carrier_off(dev);
+
+/* 1. Assert reset bit. */
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_AD_RST;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+ udelay(1000);
+
+/* 2. Turn off interrupts. ( Probably isn't necessary ) */
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_INT_OFF;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+/* 3. Clear AREGs and HASHs. */
+
+ for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
+ TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
+ }
+
+/* 4. Setup NetConfig register. */
+
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
+
+/* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */
+
+ outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
+ outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
+
+/* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */
+
+ outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
+ addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+ TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
+
+/* 7. Setup the remaining registers. */
+
+ if ( priv->tlanRev >= 0x30 ) {
+ data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
+ TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
+ }
+ TLan_PhyDetect( dev );
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
+ data |= TLAN_NET_CFG_BIT;
+ if ( priv->aui == 1 ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
+ } else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
+ priv->tlanFullDuplex = TRUE;
+ } else {
+ TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
+ }
+ }
+
+ if ( priv->phyNum == 0 ) {
+ data |= TLAN_NET_CFG_PHY_EN;
+ }
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+ TLan_FinishReset( dev );
+ } else {
+ TLan_PhyPowerDown( dev );
+ }
+
+} /* TLan_ResetAdapter */
+
+
+
+
+void
+TLan_FinishReset( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u8 data;
+ u32 phy;
+ u8 sio;
+ u16 status;
+ u16 partner;
+ u16 tlphy_ctl;
+ u16 tlphy_par;
+ u16 tlphy_id1, tlphy_id2;
+ int i;
+
+ phy = priv->phy[priv->phyNum];
+
+ data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
+ if ( priv->tlanFullDuplex ) {
+ data |= TLAN_NET_CMD_DUPLEX;
+ }
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
+ data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
+ if ( priv->phyNum == 0 ) {
+ data |= TLAN_NET_MASK_MASK7;
+ }
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
+ TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
+ TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
+ TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
+
+ if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) || ( priv->aui ) ) {
+ status = MII_GS_LINK;
+ printk( "TLAN: %s: Link forced.\n", dev->name );
+ } else {
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+ udelay( 1000 );
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+ if ( (status & MII_GS_LINK) && /* We only support link info on Nat.Sem. PHY's */
+ (tlphy_id1 == NAT_SEM_ID1) &&
+ (tlphy_id2 == NAT_SEM_ID2) ) {
+ TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
+ TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
+
+ printk( "TLAN: %s: Link active with ", dev->name );
+ if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
+ printk( "forced 10%sMbps %s-Duplex\n",
+ tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+ tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+ } else {
+ printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
+ tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+ tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+ printk("TLAN: Partner capability: ");
+ for (i = 5; i <= 10; i++)
+ if (partner & (1<<i))
+ printk("%s",media[i-5]);
+ printk("\n");
+ }
+
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+#ifdef MONITOR
+ /* We have link beat..for now anyway */
+ priv->link = 1;
+ /*Enabling link beat monitoring */
+ TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
+#endif
+ } else if (status & MII_GS_LINK) {
+ printk( "TLAN: %s: Link active\n", dev->name );
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+ }
+ }
+
+ if ( priv->phyNum == 0 ) {
+ TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
+ tlphy_ctl |= TLAN_TC_INTEN;
+ TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
+ sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
+ sio |= TLAN_NET_SIO_MINTEN;
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
+ }
+
+ if ( status & MII_GS_LINK ) {
+ TLan_SetMac( dev, 0, dev->dev_addr );
+ priv->phyOnline = 1;
+ outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
+ if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
+ outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
+ }
+ outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
+ netif_carrier_on(dev);
+ } else {
+ printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n", dev->name );
+ TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
+ return;
+ }
+
+} /* TLan_FinishReset */
+
+
+
+
+ /***************************************************************
+ * TLan_SetMac
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * on which to change the AREG.
+ * areg The AREG to set the address in (0 - 3).
+ * mac A pointer to an array of chars. Each
+ * element stores one byte of the address.
+ * IE, it isn't in ascii.
+ *
+ * This function transfers a MAC address to one of the
+ * TLAN AREGs (address registers). The TLAN chip locks
+ * the register on writing to offset 0 and unlocks the
+ * register after writing to offset 5. If NULL is passed
+ * in mac, then the AREG is filled with 0's.
+ *
+ **************************************************************/
+
+void TLan_SetMac( struct net_device *dev, int areg, char *mac )
+{
+ int i;
+
+ areg *= 6;
+
+ if ( mac != NULL ) {
+ for ( i = 0; i < 6; i++ )
+ TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
+ } else {
+ for ( i = 0; i < 6; i++ )
+ TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
+ }
+
+} /* TLan_SetMac */
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver PHY Layer Routines
+
+******************************************************************************
+*****************************************************************************/
+
+
+
+ /*********************************************************************
+ * TLan_PhyPrint
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the
+ * TLAN device having the PHYs to be detailed.
+ *
+ * This function prints the registers a PHY (aka transceiver).
+ *
+ ********************************************************************/
+
+void TLan_PhyPrint( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 i, data0, data1, data2, data3, phy;
+
+ phy = priv->phy[priv->phyNum];
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+ printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
+ } else if ( phy <= TLAN_PHY_MAX_ADDR ) {
+ printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
+ printk( "TLAN: Off. +0 +1 +2 +3 \n" );
+ for ( i = 0; i < 0x20; i+= 4 ) {
+ printk( "TLAN: 0x%02x", i );
+ TLan_MiiReadReg( dev, phy, i, &data0 );
+ printk( " 0x%04hx", data0 );
+ TLan_MiiReadReg( dev, phy, i + 1, &data1 );
+ printk( " 0x%04hx", data1 );
+ TLan_MiiReadReg( dev, phy, i + 2, &data2 );
+ printk( " 0x%04hx", data2 );
+ TLan_MiiReadReg( dev, phy, i + 3, &data3 );
+ printk( " 0x%04hx\n", data3 );
+ }
+ } else {
+ printk( "TLAN: Device %s, Invalid PHY.\n", dev->name );
+ }
+
+} /* TLan_PhyPrint */
+
+
+
+
+ /*********************************************************************
+ * TLan_PhyDetect
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the adapter
+ * for which the PHY needs determined.
+ *
+ * So far I've found that adapters which have external PHYs
+ * may also use the internal PHY for part of the functionality.
+ * (eg, AUI/Thinnet). This function finds out if this TLAN
+ * chip has an internal PHY, and then finds the first external
+ * PHY (starting from address 0) if it exists).
+ *
+ ********************************************************************/
+
+void TLan_PhyDetect( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 control;
+ u16 hi;
+ u16 lo;
+ u32 phy;
+
+ if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+ priv->phyNum = 0xFFFF;
+ return;
+ }
+
+ TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
+
+ if ( hi != 0xFFFF ) {
+ priv->phy[0] = TLAN_PHY_MAX_ADDR;
+ } else {
+ priv->phy[0] = TLAN_PHY_NONE;
+ }
+
+ priv->phy[1] = TLAN_PHY_NONE;
+ for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
+ TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
+ TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
+ TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
+ if ( ( control != 0xFFFF ) || ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
+ TLAN_DBG( TLAN_DEBUG_GNRL, "PHY found at %02x %04x %04x %04x\n", phy, control, hi, lo );
+ if ( ( priv->phy[1] == TLAN_PHY_NONE ) && ( phy != TLAN_PHY_MAX_ADDR ) ) {
+ priv->phy[1] = phy;
+ }
+ }
+ }
+
+ if ( priv->phy[1] != TLAN_PHY_NONE ) {
+ priv->phyNum = 1;
+ } else if ( priv->phy[0] != TLAN_PHY_NONE ) {
+ priv->phyNum = 0;
+ } else {
+ printk( "TLAN: Cannot initialize device, no PHY was found!\n" );
+ }
+
+} /* TLan_PhyDetect */
+
+
+
+
+void TLan_PhyPowerDown( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 value;
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
+ value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
+ TLan_MiiSync( dev->base_addr );
+ TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
+ if ( ( priv->phyNum == 0 ) && ( priv->phy[1] != TLAN_PHY_NONE ) && ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
+ TLan_MiiSync( dev->base_addr );
+ TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
+ }
+
+ /* Wait for 50 ms and powerup
+ * This is abitrary. It is intended to make sure the
+ * transceiver settles.
+ */
+ TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
+
+} /* TLan_PhyPowerDown */
+
+
+
+
+void TLan_PhyPowerUp( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 value;
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
+ TLan_MiiSync( dev->base_addr );
+ value = MII_GC_LOOPBK;
+ TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
+ TLan_MiiSync(dev->base_addr);
+ /* Wait for 500 ms and reset the
+ * transceiver. The TLAN docs say both 50 ms and
+ * 500 ms, so do the longer, just in case.
+ */
+ TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
+
+} /* TLan_PhyPowerUp */
+
+
+
+
+void TLan_PhyReset( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 phy;
+ u16 value;
+
+ phy = priv->phy[priv->phyNum];
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
+ TLan_MiiSync( dev->base_addr );
+ value = MII_GC_LOOPBK | MII_GC_RESET;
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
+ TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
+ while ( value & MII_GC_RESET ) {
+ TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
+ }
+
+ /* Wait for 500 ms and initialize.
+ * I don't remember why I wait this long.
+ * I've changed this to 50ms, as it seems long enough.
+ */
+ TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
+
+} /* TLan_PhyReset */
+
+
+
+
+void TLan_PhyStartLink( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 ability;
+ u16 control;
+ u16 data;
+ u16 phy;
+ u16 status;
+ u16 tctl;
+
+ phy = priv->phy[priv->phyNum];
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
+
+ if ( ( status & MII_GS_AUTONEG ) &&
+ ( ! priv->aui ) ) {
+ ability = status >> 11;
+ if ( priv->speed == TLAN_SPEED_10 &&
+ priv->duplex == TLAN_DUPLEX_HALF) {
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
+ } else if ( priv->speed == TLAN_SPEED_10 &&
+ priv->duplex == TLAN_DUPLEX_FULL) {
+ priv->tlanFullDuplex = TRUE;
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
+ } else if ( priv->speed == TLAN_SPEED_100 &&
+ priv->duplex == TLAN_DUPLEX_HALF) {
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
+ } else if ( priv->speed == TLAN_SPEED_100 &&
+ priv->duplex == TLAN_DUPLEX_FULL) {
+ priv->tlanFullDuplex = TRUE;
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
+ } else {
+
+ /* Set Auto-Neg advertisement */
+ TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
+ /* Enablee Auto-Neg */
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
+ /* Restart Auto-Neg */
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
+ /* Wait for 4 sec for autonegotiation
+ * to complete. The max spec time is less than this
+ * but the card need additional time to start AN.
+ * .5 sec should be plenty extra.
+ */
+ printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
+ TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
+ return;
+ }
+
+ }
+
+ if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
+ priv->phyNum = 0;
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
+ TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
+ return;
+ } else if ( priv->phyNum == 0 ) {
+ control = 0;
+ TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
+ if ( priv->aui ) {
+ tctl |= TLAN_TC_AUISEL;
+ } else {
+ tctl &= ~TLAN_TC_AUISEL;
+ if ( priv->duplex == TLAN_DUPLEX_FULL ) {
+ control |= MII_GC_DUPLEX;
+ priv->tlanFullDuplex = TRUE;
+ }
+ if ( priv->speed == TLAN_SPEED_100 ) {
+ control |= MII_GC_SPEEDSEL;
+ }
+ }
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
+ TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
+ }
+
+ /* Wait for 2 sec to give the transceiver time
+ * to establish link.
+ */
+ TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
+
+} /* TLan_PhyStartLink */
+
+
+
+
+void TLan_PhyFinishAutoNeg( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 an_adv;
+ u16 an_lpa;
+ u16 data;
+ u16 mode;
+ u16 phy;
+ u16 status;
+
+ phy = priv->phy[priv->phyNum];
+
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+ udelay( 1000 );
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+
+ if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
+ /* Wait for 8 sec to give the process
+ * more time. Perhaps we should fail after a while.
+ */
+ if (!priv->neg_be_verbose++) {
+ printk(KERN_INFO "TLAN: Giving autonegotiation more time.\n");
+ printk(KERN_INFO "TLAN: Please check that your adapter has\n");
+ printk(KERN_INFO "TLAN: been properly connected to a HUB or Switch.\n");
+ printk(KERN_INFO "TLAN: Trying to establish link in the background...\n");
+ }
+ TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
+ return;
+ }
+
+ printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
+ TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
+ TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
+ mode = an_adv & an_lpa & 0x03E0;
+ if ( mode & 0x0100 ) {
+ priv->tlanFullDuplex = TRUE;
+ } else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
+ priv->tlanFullDuplex = TRUE;
+ }
+
+ if ( ( ! ( mode & 0x0180 ) ) && ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) && ( priv->phyNum != 0 ) ) {
+ priv->phyNum = 0;
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
+ TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
+ return;
+ }
+
+ if ( priv->phyNum == 0 ) {
+ if ( ( priv->duplex == TLAN_DUPLEX_FULL ) || ( an_adv & an_lpa & 0x0040 ) ) {
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB | MII_GC_DUPLEX );
+ printk( "TLAN: Starting internal PHY with FULL-DUPLEX\n" );
+ } else {
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
+ printk( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
+ }
+ }
+
+ /* Wait for 100 ms. No reason in partiticular.
+ */
+ TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
+
+} /* TLan_PhyFinishAutoNeg */
+
+#ifdef MONITOR
+
+ /*********************************************************************
+ *
+ * TLan_phyMonitor
+ *
+ * Returns:
+ * None
+ *
+ * Params:
+ * dev The device structure of this device.
+ *
+ *
+ * This function monitors PHY condition by reading the status
+ * register via the MII bus. This can be used to give info
+ * about link changes (up/down), and possible switch to alternate
+ * media.
+ *
+ * ******************************************************************/
+
+void TLan_PhyMonitor( struct net_device *dev )
+{
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ u16 phy;
+ u16 phy_status;
+
+ phy = priv->phy[priv->phyNum];
+
+ /* Get PHY status register */
+ TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
+
+ /* Check if link has been lost */
+ if (!(phy_status & MII_GS_LINK)) {
+ if (priv->link) {
+ priv->link = 0;
+ printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
+ dev->flags &= ~IFF_RUNNING;
+ TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
+ return;
+ }
+ }
+
+ /* Link restablished? */
+ if ((phy_status & MII_GS_LINK) && !priv->link) {
+ priv->link = 1;
+ printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
+ dev->flags |= IFF_RUNNING;
+ }
+
+ /* Setup a new monitor */
+ TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
+}
+
+#endif /* MONITOR */
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver MII Routines
+
+ These routines are based on the information in Chap. 2 of the
+ "ThunderLAN Programmer's Guide", pp. 15-24.
+
+******************************************************************************
+*****************************************************************************/
+
+
+ /***************************************************************
+ * TLan_MiiReadReg
+ *
+ * Returns:
+ * 0 if ack received ok
+ * 1 otherwise.
+ *
+ * Parms:
+ * dev The device structure containing
+ * The io address and interrupt count
+ * for this device.
+ * phy The address of the PHY to be queried.
+ * reg The register whose contents are to be
+ * retreived.
+ * val A pointer to a variable to store the
+ * retrieved value.
+ *
+ * This function uses the TLAN's MII bus to retreive the contents
+ * of a given register on a PHY. It sends the appropriate info
+ * and then reads the 16-bit register value from the MII bus via
+ * the TLAN SIO register.
+ *
+ **************************************************************/
+
+int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+{
+ u8 nack;
+ u16 sio, tmp;
+ u32 i;
+ int err;
+ int minten;
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+
+ err = FALSE;
+ outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+ sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+
+ TLan_MiiSync(dev->base_addr);
+
+ minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+ if ( minten )
+ TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
+
+ TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
+ TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Read ( 10b ) */
+ TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
+ TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
+
+
+ TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */
+
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock Idle bit */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Wait 300ns */
+
+ nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK */
+ if (nack) { /* No ACK, so fake it */
+ for (i = 0; i < 16; i++) {
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ }
+ tmp = 0xffff;
+ err = TRUE;
+ } else { /* ACK, so read data */
+ for (tmp = 0, i = 0x8000; i; i >>= 1) {
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+ if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
+ tmp |= i;
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ }
+ }
+
+
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+
+ if ( minten )
+ TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
+
+ *val = tmp;
+
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return err;
+
+} /* TLan_MiiReadReg */
+
+
+
+
+ /***************************************************************
+ * TLan_MiiSendData
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ * dev The address of the PHY to be queried.
+ * data The value to be placed on the MII bus.
+ * num_bits The number of bits in data that are to
+ * be placed on the MII bus.
+ *
+ * This function sends on sequence of bits on the MII
+ * configuration bus.
+ *
+ **************************************************************/
+
+void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+{
+ u16 sio;
+ u32 i;
+
+ if ( num_bits == 0 )
+ return;
+
+ outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+ TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
+
+ for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+ (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+ if ( data & i )
+ TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
+ else
+ TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+ }
+
+} /* TLan_MiiSendData */
+
+
+
+
+ /***************************************************************
+ * TLan_MiiSync
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ *
+ * This functions syncs all PHYs in terms of the MII configuration
+ * bus.
+ *
+ **************************************************************/
+
+void TLan_MiiSync( u16 base_port )
+{
+ int i;
+ u16 sio;
+
+ outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
+ for ( i = 0; i < 32; i++ ) {
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ }
+
+} /* TLan_MiiSync */
+
+
+
+
+ /***************************************************************
+ * TLan_MiiWriteReg
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure for the device
+ * to write to.
+ * phy The address of the PHY to be written to.
+ * reg The register whose contents are to be
+ * written.
+ * val The value to be written to the register.
+ *
+ * This function uses the TLAN's MII bus to write the contents of a
+ * given register on a PHY. It sends the appropriate info and then
+ * writes the 16-bit register value from the MII configuration bus
+ * via the TLAN SIO register.
+ *
+ **************************************************************/
+
+void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
+{
+ u16 sio;
+ int minten;
+ unsigned long flags = 0;
+ TLanPrivateInfo *priv = netdev_priv(dev);
+
+ outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+ sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+
+ TLan_MiiSync( dev->base_addr );
+
+ minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+ if ( minten )
+ TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
+
+ TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
+ TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Write ( 01b ) */
+ TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
+ TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
+
+ TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Send ACK */
+ TLan_MiiSendData( dev->base_addr, val, 16 ); /* Send Data */
+
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+
+ if ( minten )
+ TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
+
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+} /* TLan_MiiWriteReg */
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ ThunderLAN Driver Eeprom routines
+
+ The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
+ EEPROM. These functions are based on information in Microchip's
+ data sheet. I don't know how well this functions will work with
+ other EEPROMs.
+
+******************************************************************************
+*****************************************************************************/
+
+
+ /***************************************************************
+ * TLan_EeSendStart
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ *
+ * This function sends a start cycle to an EEPROM attached
+ * to a TLAN chip.
+ *
+ **************************************************************/
+
+void TLan_EeSendStart( u16 io_base )
+{
+ u16 sio;
+
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+
+} /* TLan_EeSendStart */
+
+
+
+
+ /***************************************************************
+ * TLan_EeSendByte
+ *
+ * Returns:
+ * If the correct ack was received, 0, otherwise 1
+ * Parms: io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data The 8 bits of information to
+ * send to the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is sent after the ack is
+ * read.
+ *
+ * This function sends a byte on the serial EEPROM line,
+ * driving the clock to send each bit. The function then
+ * reverses transmission direction and reads an acknowledge
+ * bit.
+ *
+ **************************************************************/
+
+int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+{
+ int err;
+ u8 place;
+ u16 sio;
+
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ /* Assume clock is low, tx is enabled; */
+ for ( place = 0x80; place != 0; place >>= 1 ) {
+ if ( place & data )
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ else
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ }
+ TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+
+ if ( ( ! err ) && stop ) {
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* STOP, raise data while clock is high */
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ }
+
+ return ( err );
+
+} /* TLan_EeSendByte */
+
+
+
+
+ /***************************************************************
+ * TLan_EeReceiveByte
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data An address to a char to hold the
+ * data sent from the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is received, and no ack is
+ * sent.
+ *
+ * This function receives 8 bits of data from the EEPROM
+ * over the serial link. It then sends and ack bit, or no
+ * ack and a stop bit. This function is used to retrieve
+ * data after the address of a byte in the EEPROM has been
+ * sent.
+ *
+ **************************************************************/
+
+void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
+{
+ u8 place;
+ u16 sio;
+
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+ *data = 0;
+
+ /* Assume clock is low, tx is enabled; */
+ TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+ for ( place = 0x80; place; place >>= 1 ) {
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
+ *data |= place;
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ }
+
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+ if ( ! stop ) {
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* Ack = 0 */
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ } else {
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); /* No ack = 1 (?) */
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* STOP, raise data while clock is high */
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ }
+
+} /* TLan_EeReceiveByte */
+
+
+
+
+ /***************************************************************
+ * TLan_EeReadByte
+ *
+ * Returns:
+ * No error = 0, else, the stage at which the error
+ * occurred.
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * ee_addr The address of the byte in the
+ * EEPROM whose contents are to be
+ * retrieved.
+ * data An address to a char to hold the
+ * data obtained from the EEPROM.
+ *
+ * This function reads a byte of information from an byte
+ * cell in the EEPROM.
+ *
+ **************************************************************/
+
+int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
+{
+ int err;
+ TLanPrivateInfo *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+ int ret=0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ TLan_EeSendStart( dev->base_addr );
+ err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK );
+ if (err)
+ {
+ ret=1;
+ goto fail;
+ }
+ err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK );
+ if (err)
+ {
+ ret=2;
+ goto fail;
+ }
+ TLan_EeSendStart( dev->base_addr );
+ err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK );
+ if (err)
+ {
+ ret=3;
+ goto fail;
+ }
+ TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP );
+fail:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+
+} /* TLan_EeReadByte */
+
+
+