ucc_geth: migrate ucc_geth to phylib

migrate ucc_geth to use the common phylib code.

There are several side effects from doing this:

o deprecate 'interface' property specification present
  in some old device tree source files in
  favour of a split 'max-speed' and 'interface-type'
  description to appropriately match definitions
  in include/linux/phy.h.  Note that 'interface' property
  is still honoured if max-speed or interface-type
  are not present (backward compatible).
o compile-time CONFIG_UGETH_HAS_GIGA is eliminated
  in favour of probe time speed derivation logic.
o adjust_link streamlined to only operate on maccfg2
  and upsmr.r10m, instead of reapplying static initial
  values related to the interface-type.
o Addition of UEC MDIO of_platform driver requires
  platform code add 'mdio' type to id list
  prior to calling of_platform_bus_probe (separate patch).
o ucc_struct_init introduced to reduce ucc_geth_startup
  complexity.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
new file mode 100644
index 000000000000..73b5a538e8f4
--- /dev/null
+++ b/drivers/net/ucc_geth_mii.c
@@ -0,0 +1,279 @@
+/*
+ * drivers/net/ucc_geth_mii.c
+ *
+ * Gianfar Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Li Yang
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <asm/ocp.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/of_platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/ucc.h>
+
+#include "ucc_geth_mii.h"
+#include "ucc_geth.h"
+
+#define DEBUG
+#ifdef DEBUG
+#define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg)
+#else
+#define vdbg(format, arg...) do {} while(0)
+#endif
+
+#define DRV_DESC "QE UCC Ethernet Controller MII Bus"
+#define DRV_NAME "fsl-uec_mdio"
+
+/* Write value to the PHY for this device to the register at regnum, */
+/* waiting until the write is done before it returns.  All PHY */
+/* configuration has to be done through the master UEC MIIM regs */
+int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
+
+	/* Setting up the MII Mangement Address Register */
+	out_be32(&regs->miimadd,
+		 (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
+
+	/* Setting up the MII Mangement Control Register with the value */
+	out_be32(&regs->miimcon, value);
+
+	/* Wait till MII management write is complete */
+	while ((in_be32(&regs->miimind)) & MIIMIND_BUSY)
+		cpu_relax();
+
+	return 0;
+}
+
+/* Reads from register regnum in the PHY for device dev, */
+/* returning the value.  Clears miimcom first.  All PHY */
+/* configuration has to be done through the TSEC1 MIIM regs */
+int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
+	u16 value;
+
+	/* Setting up the MII Mangement Address Register */
+	out_be32(&regs->miimadd,
+		 (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
+
+	/* Clear miimcom, perform an MII management read cycle */
+	out_be32(&regs->miimcom, 0);
+	out_be32(&regs->miimcom, MIIMCOM_READ_CYCLE);
+
+	/* Wait till MII management write is complete */
+	while ((in_be32(&regs->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID))
+		cpu_relax();
+
+	/* Read MII management status  */
+	value = in_be32(&regs->miimstat);
+
+	return value;
+}
+
+/* Reset the MIIM registers, and wait for the bus to free */
+int uec_mdio_reset(struct mii_bus *bus)
+{
+	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
+	unsigned int timeout = PHY_INIT_TIMEOUT;
+
+	spin_lock_bh(&bus->mdio_lock);
+
+	/* Reset the management interface */
+	out_be32(&regs->miimcfg, MIIMCFG_RESET_MANAGEMENT);
+
+	/* Setup the MII Mgmt clock speed */
+	out_be32(&regs->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112);
+
+	/* Wait until the bus is free */
+	while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
+		cpu_relax();
+
+	spin_unlock_bh(&bus->mdio_lock);
+
+	if (timeout <= 0) {
+		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match)
+{
+	struct device *device = &ofdev->dev;
+	struct device_node *np = ofdev->node, *tempnp = NULL;
+	struct device_node *child = NULL;
+	struct ucc_mii_mng __iomem *regs;
+	struct mii_bus *new_bus;
+	struct resource res;
+	int k, err = 0;
+
+	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+	if (NULL == new_bus)
+		return -ENOMEM;
+
+	new_bus->name = "UCC Ethernet Controller MII Bus";
+	new_bus->read = &uec_mdio_read;
+	new_bus->write = &uec_mdio_write;
+	new_bus->reset = &uec_mdio_reset;
+
+	memset(&res, 0, sizeof(res));
+
+	err = of_address_to_resource(np, 0, &res);
+	if (err)
+		goto reg_map_fail;
+
+	new_bus->id = res.start;
+
+	new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
+
+	if (NULL == new_bus->irq) {
+		err = -ENOMEM;
+		goto reg_map_fail;
+	}
+
+	for (k = 0; k < 32; k++)
+		new_bus->irq[k] = PHY_POLL;
+
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		if (irq != NO_IRQ) {
+			const u32 *id = get_property(child, "reg", NULL);
+			new_bus->irq[*id] = irq;
+		}
+	}
+
+	/* Set the base address */
+	regs = ioremap(res.start, sizeof(struct ucc_mii_mng));
+
+	if (NULL == regs) {
+		err = -ENOMEM;
+		goto ioremap_fail;
+	}
+
+	new_bus->priv = (void __force *)regs;
+
+	new_bus->dev = device;
+	dev_set_drvdata(device, new_bus);
+
+	/* Read MII management master from device tree */
+	while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth"))
+	       != NULL) {
+		struct resource tempres;
+
+		err = of_address_to_resource(tempnp, 0, &tempres);
+		if (err)
+			goto bus_register_fail;
+
+		/* if our mdio regs fall within this UCC regs range */
+		if ((res.start >= tempres.start) &&
+		    (res.end <= tempres.end)) {
+			/* set this UCC to be the MII master */
+			const u32 *id = get_property(tempnp, "device-id", NULL);
+			if (id == NULL)
+				goto bus_register_fail;
+
+			ucc_set_qe_mux_mii_mng(*id - 1);
+
+			/* assign the TBI an address which won't
+			 * conflict with the PHYs */
+			out_be32(&regs->utbipar, UTBIPAR_INIT_TBIPA);
+			break;
+		}
+	}
+
+	err = mdiobus_register(new_bus);
+	if (0 != err) {
+		printk(KERN_ERR "%s: Cannot register as MDIO bus\n",
+		       new_bus->name);
+		goto bus_register_fail;
+	}
+
+	return 0;
+
+bus_register_fail:
+	iounmap(regs);
+ioremap_fail:
+	kfree(new_bus->irq);
+reg_map_fail:
+	kfree(new_bus);
+
+	return err;
+}
+
+int uec_mdio_remove(struct of_device *ofdev)
+{
+	struct device *device = &ofdev->dev;
+	struct mii_bus *bus = dev_get_drvdata(device);
+
+	mdiobus_unregister(bus);
+
+	dev_set_drvdata(device, NULL);
+
+	iounmap((void __iomem *)bus->priv);
+	bus->priv = NULL;
+	kfree(bus);
+
+	return 0;
+}
+
+static struct of_device_id uec_mdio_match[] = {
+	{
+		.type = "mdio",
+		.compatible = "ucc_geth_phy",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, uec_mdio_match);
+
+static struct of_platform_driver uec_mdio_driver = {
+	.name	= DRV_NAME,
+	.probe	= uec_mdio_probe,
+	.remove	= uec_mdio_remove,
+	.match_table	= uec_mdio_match,
+};
+
+int __init uec_mdio_init(void)
+{
+	return of_register_platform_driver(&uec_mdio_driver);
+}
+
+void __exit uec_mdio_exit(void)
+{
+	of_unregister_platform_driver(&uec_mdio_driver);
+}