Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...

1 files changed, 43 insertions, 10 deletions

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 3fca200b986c..930785a724e1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -57,12 +57,6 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_TARGET_WAIT 3000
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
-#define QCA988X_2_0_DEVICE_ID	(0x003c)
-#define QCA6164_2_1_DEVICE_ID	(0x0041)
-#define QCA6174_2_1_DEVICE_ID	(0x003e)
-#define QCA99X0_2_0_DEVICE_ID	(0x0040)
-#define QCA9377_1_0_DEVICE_ID	(0x0042)
-
 static const struct pci_device_id ath10k_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
 	{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
@@ -92,7 +86,9 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
 
 	{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
+
 	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
+	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
 };
 
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
@@ -111,8 +107,9 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state);
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 
-static const struct ce_attr host_ce_config_wlan[] = {
+static struct ce_attr host_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
 	{
 		.flags = CE_ATTR_FLAGS,
@@ -128,7 +125,7 @@ static const struct ce_attr host_ce_config_wlan[] = {
 		.src_nentries = 0,
 		.src_sz_max = 2048,
 		.dest_nentries = 512,
-		.recv_cb = ath10k_pci_htc_rx_cb,
+		.recv_cb = ath10k_pci_htt_htc_rx_cb,
 	},
 
 	/* CE2: target->host WMI */
@@ -217,7 +214,7 @@ static const struct ce_attr host_ce_config_wlan[] = {
 };
 
 /* Target firmware's Copy Engine configuration. */
-static const struct ce_pipe_config target_ce_config_wlan[] = {
+static struct ce_pipe_config target_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
 	{
 		.pipenum = __cpu_to_le32(0),
@@ -330,7 +327,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = {
  * This table is derived from the CE_PCI TABLE, above.
  * It is passed to the Target at startup for use by firmware.
  */
-static const struct service_to_pipe target_service_to_ce_map_wlan[] = {
+static struct service_to_pipe target_service_to_ce_map_wlan[] = {
 	{
 		__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
 		__cpu_to_le32(PIPEDIR_OUT),	/* out = UL = host -> target */
@@ -1208,6 +1205,16 @@ static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
 }
 
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
+{
+	/* CE4 polling needs to be done whenever CE pipe which transports
+	 * HTT Rx (target->host) is processed.
+	 */
+	ath10k_ce_per_engine_service(ce_state->ar, 4);
+
+	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
+}
+
 /* Called by lower (CE) layer when a send to HTT Target completes. */
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {
@@ -2027,6 +2034,29 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	return 0;
 }
 
+static void ath10k_pci_override_ce_config(struct ath10k *ar)
+{
+	struct ce_attr *attr;
+	struct ce_pipe_config *config;
+
+	/* For QCA6174 we're overriding the Copy Engine 5 configuration,
+	 * since it is currently used for other feature.
+	 */
+
+	/* Override Host's Copy Engine 5 configuration */
+	attr = &host_ce_config_wlan[5];
+	attr->src_sz_max = 0;
+	attr->dest_nentries = 0;
+
+	/* Override Target firmware's Copy Engine configuration */
+	config = &target_ce_config_wlan[5];
+	config->pipedir = __cpu_to_le32(PIPEDIR_OUT);
+	config->nbytes_max = __cpu_to_le32(2048);
+
+	/* Map from service/endpoint to Copy Engine */
+	target_service_to_ce_map_wlan[15].pipenum = __cpu_to_le32(1);
+}
+
 static int ath10k_pci_alloc_pipes(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -3020,6 +3050,9 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_core_destroy;
 	}
 
+	if (QCA_REV_6174(ar))
+		ath10k_pci_override_ce_config(ar);
+
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",