atheros: put atheros wireless drivers into ath/

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 1346 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
new file mode 100644
index 000000000000..775fdf78554b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -0,0 +1,1346 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_RESET
+
+/*****************************\
+  Reset functions and helpers
+\*****************************/
+
+#include <linux/pci.h> 		/* To determine if a card is pci-e */
+#include <linux/bitops.h>	/* For get_bitmask_order */
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
+ *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * http://www.freepatentsonline.com/7184495.html
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+	struct ieee80211_channel *channel)
+{
+	/* Get exponent and mantissa and set it */
+	u32 coef_scaled, coef_exp, coef_man,
+		ds_coef_exp, ds_coef_man, clock;
+
+	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM));
+
+	/* Get coefficient
+	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
+	 * we scale coef by shifting clock value by 24 for
+	 * better precision since we use integers */
+	/* TODO: Half/quarter rate */
+	clock =  ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
+
+	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+	/* Get exponent
+	 * ALGO: coef_exp = 14 - highest set bit position */
+	coef_exp = get_bitmask_order(coef_scaled);
+
+	/* Doesn't make sense if it's zero*/
+	if (!coef_exp)
+		return -EINVAL;
+
+	/* Note: we've shifted coef_scaled by 24 */
+	coef_exp = 14 - (coef_exp - 24);
+
+
+	/* Get mantissa (significant digits)
+	 * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
+	coef_man = coef_scaled +
+		(1 << (24 - coef_exp - 1));
+
+	/* Calculate delta slope coefficient exponent
+	 * and mantissa (remove scaling) and set them on hw */
+	ds_coef_man = coef_man >> (24 - coef_exp);
+	ds_coef_exp = coef_exp - 16;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+	return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static const unsigned int control_rates[] =
+	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preample
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
+ * quarter rate mode, we need to use another set of bitrates (that's why we
+ * need the mode parameter) but we don't handle these proprietary modes yet.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+       unsigned int mode)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct ieee80211_rate *rate;
+	unsigned int i;
+
+	/* Write rate duration table */
+	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
+		u32 reg;
+		u16 tx_time;
+
+		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+
+		/* Set ACK timeout */
+		reg = AR5K_RATE_DUR(rate->hw_value);
+
+		/* An ACK frame consists of 10 bytes. If you add the FCS,
+		 * which ieee80211_generic_frame_duration() adds,
+		 * its 14 bytes. Note we use the control rate and not the
+		 * actual rate for this rate. See mac80211 tx.c
+		 * ieee80211_duration() for a brief description of
+		 * what rate we should choose to TX ACKs. */
+		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
+							sc->vif, 10, rate));
+
+		ath5k_hw_reg_write(ah, tx_time, reg);
+
+		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+			continue;
+
+		/*
+		 * We're not distinguishing short preamble here,
+		 * This is true, all we'll get is a longer value here
+		 * which is not necessarilly bad. We could use
+		 * export ieee80211_frame_duration() but that needs to be
+		 * fixed first to be properly used by mac802111 drivers:
+		 *
+		 *  - remove erp stuff and let the routine figure ofdm
+		 *    erp rates
+		 *  - remove passing argument ieee80211_local as
+		 *    drivers don't have access to it
+		 *  - move drivers using ieee80211_generic_frame_duration()
+		 *    to this
+		 */
+		ath5k_hw_reg_write(ah, tx_time,
+			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+	}
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+	int ret;
+	u32 mask = val ? val : ~0U;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Read-and-clear RX Descriptor Pointer*/
+	ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+	/*
+	 * Reset the device and wait until success
+	 */
+	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+	/* Wait at least 128 PCI clocks */
+	udelay(15);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+	} else {
+		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+	}
+
+	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+	/*
+	 * Reset configuration register (for hw byte-swap). Note that this
+	 * is only set for big endian. We do the necessary magic in
+	 * AR5K_INIT_CFG.
+	 */
+	if ((val & AR5K_RESET_CTL_PCU) == 0)
+		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+	return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+		bool set_chip, u16 sleep_duration)
+{
+	unsigned int i;
+	u32 staid, data;
+
+	ATH5K_TRACE(ah->ah_sc);
+	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+	switch (mode) {
+	case AR5K_PM_AUTO:
+		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+		/* fallthrough */
+	case AR5K_PM_NETWORK_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah,
+				AR5K_SLEEP_CTL_SLE_ALLOW |
+				sleep_duration,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_FULL_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_AWAKE:
+
+		staid &= ~AR5K_STA_ID1_PWR_SV;
+
+		if (!set_chip)
+			goto commit;
+
+		/* Preserve sleep duration */
+		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+		if (data & 0xffc00000)
+			data = 0;
+		else
+			data = data & 0xfffcffff;
+
+		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		udelay(15);
+
+		for (i = 50; i > 0; i--) {
+			/* Check if the chip did wake up */
+			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+					AR5K_PCICFG_SPWR_DN) == 0)
+				break;
+
+			/* Wait a bit and retry */
+			udelay(200);
+			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		}
+
+		/* Fail if the chip didn't wake up */
+		if (i <= 0)
+			return -EIO;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+commit:
+	ah->ah_power_mode = mode;
+	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+	return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips and program PLL
+ * TODO: Half/Quarter rate support
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 turbo, mode, clock, bus_flags;
+	int ret;
+
+	turbo = 0;
+	mode = 0;
+	clock = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Wakeup the device */
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+		return ret;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Get channel mode flags
+		 */
+
+		if (ah->ah_radio >= AR5K_RF5112) {
+			mode = AR5K_PHY_MODE_RAD_RF5112;
+			clock = AR5K_PHY_PLL_RF5112;
+		} else {
+			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
+			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
+		}
+
+		if (flags & CHANNEL_2GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+			clock |= AR5K_PHY_PLL_44MHZ;
+
+			if (flags & CHANNEL_CCK) {
+				mode |= AR5K_PHY_MODE_MOD_CCK;
+			} else if (flags & CHANNEL_OFDM) {
+				/* XXX Dynamic OFDM/CCK is not supported by the
+				 * AR5211 so we set MOD_OFDM for plain g (no
+				 * CCK headers) operation. We need to test
+				 * this, 5211 might support ofdm-only g after
+				 * all, there are also initial register values
+				 * in the code for g mode (see initvals.c). */
+				if (ah->ah_version == AR5K_AR5211)
+					mode |= AR5K_PHY_MODE_MOD_OFDM;
+				else
+					mode |= AR5K_PHY_MODE_MOD_DYN;
+			} else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else if (flags & CHANNEL_5GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+
+			if (ah->ah_radio == AR5K_RF5413)
+				clock = AR5K_PHY_PLL_40MHZ_5413;
+			else
+				clock |= AR5K_PHY_PLL_40MHZ;
+
+			if (flags & CHANNEL_OFDM)
+				mode |= AR5K_PHY_MODE_MOD_OFDM;
+			else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else {
+			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+			return -EINVAL;
+		}
+
+		if (flags & CHANNEL_TURBO)
+			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+	} else { /* Reset the device */
+
+		/* ...enable Atheros turbo mode if requested */
+		if (flags & CHANNEL_TURBO)
+			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+					AR5K_PHY_TURBO);
+	}
+
+	/* reseting PCI on PCI-E cards results card to hang
+	 * and always return 0xffff... so we ingore that flag
+	 * for PCI-E cards */
+	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+	/* Reset chipset */
+	if (ah->ah_version == AR5K_AR5210) {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+			mdelay(2);
+	} else {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_BASEBAND | bus_flags);
+	}
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	/* ...wakeup again!*/
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+		return ret;
+	}
+
+	/* ...final warm reset */
+	if (ath5k_hw_nic_reset(ah, 0)) {
+		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+
+		/* ...update PLL if needed */
+		if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
+			ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+			udelay(300);
+		}
+
+		/* ...set the PHY operating mode */
+		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+	}
+
+	return 0;
+}
+
+/*
+ * If there is an external 32KHz crystal available, use it
+ * as ref. clock instead of 32/40MHz clock and baseband clocks
+ * to save power during sleep or restore normal 32/40MHz
+ * operation.
+ *
+ * XXX: When operating on 32KHz certain PHY registers (27 - 31,
+ * 	123 - 127) require delay on access.
+ */
+static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 scal, spending, usec32;
+
+	/* Only set 32KHz settings if we have an external
+	 * 32KHz crystal present */
+	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
+	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
+	enable) {
+
+		/* 1 usec/cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
+		/* Set up tsf increment on each cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
+
+		/* Set baseband sleep control registers
+		 * and sleep control rate */
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
+		} else {
+			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
+		}
+
+		/* Enable sleep clock operation */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+	} else {
+
+		/* Disable sleep clock operation and
+		 * restore default parameters */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+
+		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+			scal = AR5K_PHY_SCAL_32MHZ_2417;
+		else if (ath5k_eeprom_is_hb63(ah))
+			scal = AR5K_PHY_SCAL_32MHZ_HB63;
+		else
+			scal = AR5K_PHY_SCAL_32MHZ;
+		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413))
+			usec32 = 39;
+		else
+			usec32 = 31;
+		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
+	}
+	return;
+}
+
+static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	u8 refclk_freq;
+
+	if ((ah->ah_radio == AR5K_RF5112) ||
+	(ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+		refclk_freq = 40;
+	else
+		refclk_freq = 32;
+
+	if ((channel->center_freq % refclk_freq != 0) &&
+	((channel->center_freq % refclk_freq < 10) ||
+	(channel->center_freq % refclk_freq > 22)))
+		return true;
+	else
+		return false;
+}
+
+/* TODO: Half/Quarter rate */
+static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	if (ah->ah_version == AR5K_AR5212 &&
+	    ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+
+		/* Setup ADC control */
+		ath5k_hw_reg_write(ah,
+				(AR5K_REG_SM(2,
+				AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
+				AR5K_REG_SM(2,
+				AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
+				AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
+				AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
+				AR5K_PHY_ADC_CTL);
+
+
+
+		/* Disable barker RSSI threshold */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+				AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+			AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
+
+		/* Set the mute mask */
+		ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+	}
+
+	/* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
+	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
+
+	/* Enable DCU double buffering */
+	if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				AR5K_TXCFG_DCU_DBL_BUF_DIS);
+
+	/* Set DAC/ADC delays */
+	if (ah->ah_version == AR5K_AR5212) {
+		u32 scal;
+		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+			scal = AR5K_PHY_SCAL_32MHZ_2417;
+		else if (ath5k_eeprom_is_hb63(ah))
+			scal = AR5K_PHY_SCAL_32MHZ_HB63;
+		else
+			scal = AR5K_PHY_SCAL_32MHZ;
+		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+	}
+
+	/* Set fast ADC */
+	if ((ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+		u32 fast_adc = true;
+
+		if (channel->center_freq == 2462 ||
+		channel->center_freq == 2467)
+			fast_adc = 0;
+
+		/* Only update if needed */
+		if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
+				ath5k_hw_reg_write(ah, fast_adc,
+						AR5K_PHY_FAST_ADC);
+	}
+
+	/* Fix for first revision of the RF5112 RF chipset */
+	if (ah->ah_radio == AR5K_RF5112 &&
+			ah->ah_radio_5ghz_revision <
+			AR5K_SREV_RAD_5112A) {
+		u32 data;
+		ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+				AR5K_PHY_CCKTXCTL);
+		if (channel->hw_value & CHANNEL_5GHZ)
+			data = 0xffb81020;
+		else
+			data = 0xffb80d20;
+		ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+	}
+
+	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+		u32 usec_reg;
+		/* 5311 has different tx/rx latency masks
+		 * from 5211, since we deal 5311 the same
+		 * as 5211 when setting initvals, shift
+		 * values here to their proper locations */
+		usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+		ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
+				AR5K_USEC_32 |
+				AR5K_USEC_TX_LATENCY_5211 |
+				AR5K_REG_SM(29,
+				AR5K_USEC_RX_LATENCY_5210)),
+				AR5K_USEC_5211);
+		/* Clear QCU/DCU clock gating register */
+		ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
+		/* Set DAC/ADC delays */
+		ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+		/* Enable PCU FIFO corruption ECO */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_ECO_ENABLE);
+	}
+}
+
+static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	s16 cck_ofdm_pwr_delta;
+
+	/* Adjust power delta for channel 14 */
+	if (channel->center_freq == 2484)
+		cck_ofdm_pwr_delta =
+			((ee->ee_cck_ofdm_power_delta -
+			ee->ee_scaled_cck_delta) * 2) / 10;
+	else
+		cck_ofdm_pwr_delta =
+			(ee->ee_cck_ofdm_power_delta * 2) / 10;
+
+	/* Set CCK to OFDM power delta on tx power
+	 * adjustment register */
+	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+		if (channel->hw_value == CHANNEL_G)
+			ath5k_hw_reg_write(ah,
+			AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
+				AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
+			AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
+				AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
+				AR5K_PHY_TX_PWR_ADJ);
+		else
+			ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+	} else {
+		/* For older revs we scale power on sw during tx power
+		 * setup */
+		ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
+		ah->ah_txpower.txp_cck_ofdm_gainf_delta =
+						ee->ee_cck_ofdm_gain_delta;
+	}
+
+	/* Set antenna idle switch table */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+			AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+			(ah->ah_antenna[ee_mode][0] |
+			AR5K_PHY_ANT_CTL_TXRX_EN));
+
+	/* Set antenna switch table */
+	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+		AR5K_PHY_ANT_SWITCH_TABLE_0);
+	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+		AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+	/* Noise floor threshold */
+	ath5k_hw_reg_write(ah,
+		AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+		AR5K_PHY_NFTHRES);
+
+	if ((channel->hw_value & CHANNEL_TURBO) &&
+	(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
+		/* Switch settling time (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+				AR5K_PHY_SETTLING_SWITCH,
+				ee->ee_switch_settling_turbo[ee_mode]);
+
+		/* Tx/Rx attenuation (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+				AR5K_PHY_GAIN_TXRX_ATTEN,
+				ee->ee_atn_tx_rx_turbo[ee_mode]);
+
+		/* ADC/PGA desired size (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_ADC,
+				ee->ee_adc_desired_size_turbo[ee_mode]);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_PGA,
+				ee->ee_pga_desired_size_turbo[ee_mode]);
+
+		/* Tx/Rx margin (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx_turbo[ee_mode]);
+
+	} else {
+		/* Switch settling time */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+				AR5K_PHY_SETTLING_SWITCH,
+				ee->ee_switch_settling[ee_mode]);
+
+		/* Tx/Rx attenuation */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+				AR5K_PHY_GAIN_TXRX_ATTEN,
+				ee->ee_atn_tx_rx[ee_mode]);
+
+		/* ADC/PGA desired size */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_ADC,
+				ee->ee_adc_desired_size[ee_mode]);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_PGA,
+				ee->ee_pga_desired_size[ee_mode]);
+
+		/* Tx/Rx margin */
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx[ee_mode]);
+	}
+
+	/* XPA delays */
+	ath5k_hw_reg_write(ah,
+		(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+		(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+		(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+		(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+	/* XLNA delay */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
+			AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
+			ee->ee_tx_end2xlna_enable[ee_mode]);
+
+	/* Thresh64 (ANI) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
+			AR5K_PHY_NF_THRESH62,
+			ee->ee_thr_62[ee_mode]);
+
+
+	/* False detect backoff for channels
+	 * that have spur noise. Write the new
+	 * cyclic power RSSI threshold. */
+	if (ath5k_hw_chan_has_spur_noise(ah, channel))
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+				AR5K_INIT_CYCRSSI_THR1 +
+				ee->ee_false_detect[ee_mode]);
+	else
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+				AR5K_INIT_CYCRSSI_THR1);
+
+	/* I/Q correction
+	 * TODO: Per channel i/q infos ? */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+		AR5K_PHY_IQ_CORR_ENABLE |
+		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+		ee->ee_q_cal[ee_mode]);
+
+	/* Heavy clipping -disable for now */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
+
+	return;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+	struct ieee80211_channel *channel, bool change_channel)
+{
+	u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
+	u32 phy_tst1;
+	u8 mode, freq, ee_mode, ant[2];
+	int i, ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	s_ant = 0;
+	ee_mode = 0;
+	staid1_flags = 0;
+	tsf_up = 0;
+	tsf_lo = 0;
+	freq = 0;
+	mode = 0;
+
+	/*
+	 * Save some registers before a reset
+	 */
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+
+		switch (channel->hw_value & CHANNEL_MODES) {
+		case CHANNEL_A:
+			mode = AR5K_MODE_11A;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		case CHANNEL_G:
+			mode = AR5K_MODE_11G;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_B:
+			mode = AR5K_MODE_11B;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11B;
+			break;
+		case CHANNEL_T:
+			mode = AR5K_MODE_11A_TURBO;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		case CHANNEL_TG:
+			if (ah->ah_version == AR5K_AR5211) {
+				ATH5K_ERR(ah->ah_sc,
+					"TurboG mode not available on 5211");
+				return -EINVAL;
+			}
+			mode = AR5K_MODE_11G_TURBO;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_XR:
+			if (ah->ah_version == AR5K_AR5211) {
+				ATH5K_ERR(ah->ah_sc,
+					"XR mode not available on 5211");
+				return -EINVAL;
+			}
+			mode = AR5K_MODE_XR;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		default:
+			ATH5K_ERR(ah->ah_sc,
+				"invalid channel: %d\n", channel->center_freq);
+			return -EINVAL;
+		}
+
+		if (change_channel) {
+			/*
+			 * Save frame sequence count
+			 * For revs. after Oahu, only save
+			 * seq num for DCU 0 (Global seq num)
+			 */
+			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+				for (i = 0; i < 10; i++)
+					s_seq[i] = ath5k_hw_reg_read(ah,
+						AR5K_QUEUE_DCU_SEQNUM(i));
+
+			} else {
+				s_seq[0] = ath5k_hw_reg_read(ah,
+						AR5K_QUEUE_DCU_SEQNUM(0));
+			}
+
+			/* TSF accelerates on AR5211 durring reset
+			 * As a workaround save it here and restore
+			 * it later so that it's back in time after
+			 * reset. This way it'll get re-synced on the
+			 * next beacon without breaking ad-hoc.
+			 *
+			 * On AR5212 TSF is almost preserved across a
+			 * reset so it stays back in time anyway and
+			 * we don't have to save/restore it.
+			 *
+			 * XXX: Since this breaks power saving we have
+			 * to disable power saving until we receive the
+			 * next beacon, so we can resync beacon timers */
+			if (ah->ah_version == AR5K_AR5211) {
+				tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+				tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+			}
+		}
+
+		/* Save default antenna */
+		s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+		if (ah->ah_version == AR5K_AR5212) {
+			/* Restore normal 32/40MHz clock operation
+			 * to avoid register access delay on certain
+			 * PHY registers */
+			ath5k_hw_set_sleep_clock(ah, false);
+
+			/* Since we are going to write rf buffer
+			 * check if we have any pending gain_F
+			 * optimization settings */
+			if (change_channel && ah->ah_rf_banks != NULL)
+				ath5k_hw_gainf_calibrate(ah);
+		}
+	}
+
+	/*GPIOs*/
+	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+					AR5K_PCICFG_LEDSTATE;
+	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	/* AR5K_STA_ID1 flags, only preserve antenna
+	 * settings and ack/cts rate mode */
+	staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
+			(AR5K_STA_ID1_DEFAULT_ANTENNA |
+			AR5K_STA_ID1_DESC_ANTENNA |
+			AR5K_STA_ID1_RTS_DEF_ANTENNA |
+			AR5K_STA_ID1_ACKCTS_6MB |
+			AR5K_STA_ID1_BASE_RATE_11B |
+			AR5K_STA_ID1_SELFGEN_DEF_ANT);
+
+	/* Wakeup the device */
+	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize operating mode
+	 */
+	ah->ah_op_mode = op_mode;
+
+	/* PHY access enable */
+	if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+	else
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
+							AR5K_PHY(0));
+
+	/* Write initial settings */
+	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+	if (ret)
+		return ret;
+
+	/*
+	 * 5211/5212 Specific
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+
+		/*
+		 * Write initial RF gain settings
+		 * This should work for both 5111/5112
+		 */
+		ret = ath5k_hw_rfgain_init(ah, freq);
+		if (ret)
+			return ret;
+
+		mdelay(1);
+
+		/*
+		 * Tweak initval settings for revised
+		 * chipsets and add some more config
+		 * bits
+		 */
+		ath5k_hw_tweak_initval_settings(ah, channel);
+
+		/*
+		 * Set TX power (FIXME)
+		 */
+		ret = ath5k_hw_txpower(ah, channel, ee_mode,
+					AR5K_TUNE_DEFAULT_TXPOWER);
+		if (ret)
+			return ret;
+
+		/* Write rate duration table only on AR5212 and if
+		 * virtual interface has already been brought up
+		 * XXX: rethink this after new mode changes to
+		 * mac80211 are integrated */
+		if (ah->ah_version == AR5K_AR5212 &&
+			ah->ah_sc->vif != NULL)
+			ath5k_hw_write_rate_duration(ah, mode);
+
+		/*
+		 * Write RF buffer
+		 */
+		ret = ath5k_hw_rfregs_init(ah, channel, mode);
+		if (ret)
+			return ret;
+
+
+		/* Write OFDM timings on 5212*/
+		if (ah->ah_version == AR5K_AR5212 &&
+			channel->hw_value & CHANNEL_OFDM) {
+			ret = ath5k_hw_write_ofdm_timings(ah, channel);
+			if (ret)
+				return ret;
+		}
+
+		/*Enable/disable 802.11b mode on 5111
+		(enable 2111 frequency converter + CCK)*/
+		if (ah->ah_radio == AR5K_RF5111) {
+			if (mode == AR5K_MODE_11B)
+				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+			else
+				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+		}
+
+		/*
+		 * In case a fixed antenna was set as default
+		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+		 * registers.
+		 */
+		if (s_ant != 0) {
+			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+			else	/* 2 - Aux */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+		} else {
+			ant[0] = AR5K_ANT_FIXED_A;
+			ant[1] = AR5K_ANT_FIXED_B;
+		}
+
+		/* Commit values from EEPROM */
+		ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
+
+	} else {
+		/*
+		 * For 5210 we do all initialization using
+		 * initvals, so we don't have to modify
+		 * any settings (5210 also only supports
+		 * a/aturbo modes)
+		 */
+		mdelay(1);
+		/* Disable phy and wait */
+		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+		mdelay(1);
+	}
+
+	/*
+	 * Restore saved values
+	 */
+
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+
+		if (change_channel) {
+			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+				for (i = 0; i < 10; i++)
+					ath5k_hw_reg_write(ah, s_seq[i],
+						AR5K_QUEUE_DCU_SEQNUM(i));
+			} else {
+				ath5k_hw_reg_write(ah, s_seq[0],
+					AR5K_QUEUE_DCU_SEQNUM(0));
+			}
+
+
+			if (ah->ah_version == AR5K_AR5211) {
+				ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+				ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
+			}
+		}
+
+		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+	}
+
+	/* Ledstate */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+
+	/* Gpio settings */
+	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+	/* Restore sta_id flags and preserve our mac address*/
+	ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
+						AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
+						AR5K_STA_ID1);
+
+
+	/*
+	 * Configure PCU
+	 */
+
+	/* Restore bssid and bssid mask */
+	/* XXX: add ah->aid once mac80211 gives this to us */
+	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+	/* Set PCU config */
+	ath5k_hw_set_opmode(ah);
+
+	/* Clear any pending interrupts
+	 * PISR/SISR Not available on 5210 */
+	if (ah->ah_version != AR5K_AR5210)
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+
+	/* Set RSSI/BRSSI thresholds
+	 *
+	 * Note: If we decide to set this value
+	 * dynamicaly, have in mind that when AR5K_RSSI_THR
+	 * register is read it might return 0x40 if we haven't
+	 * wrote anything to it plus BMISS RSSI threshold is zeroed.
+	 * So doing a save/restore procedure here isn't the right
+	 * choice. Instead store it on ath5k_hw */
+	ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+				AR5K_TUNE_BMISS_THRES <<
+				AR5K_RSSI_THR_BMISS_S),
+				AR5K_RSSI_THR);
+
+	/* MIC QoS support */
+	if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+		ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+		ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+	}
+
+	/* QoS NOACK Policy */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+			AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
+			AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+			AR5K_QOS_NOACK);
+	}
+
+
+	/*
+	 * Configure PHY
+	 */
+
+	/* Set channel on PHY */
+	ret = ath5k_hw_channel(ah, channel);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable the PHY and wait until completion
+	 * This includes BaseBand and Synthesizer
+	 * activation.
+	 */
+	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+	/*
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
+	 *
+	 * TODO: Half/quarter rate support
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		u32 delay;
+		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+			AR5K_PHY_RX_DELAY_M;
+		delay = (channel->hw_value & CHANNEL_CCK) ?
+			((delay << 2) / 22) : (delay / 10);
+
+		udelay(100 + (2 * delay));
+	} else {
+		mdelay(1);
+	}
+
+	/*
+	 * Perform ADC test to see if baseband is ready
+	 * Set tx hold and check adc test register
+	 */
+	phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
+	}
+	ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+
+	/*
+	 * Start automatic gain control calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a power detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), that doesn't
+	 * interrupt rx path.
+	 *
+	 * While rx path is re-routed to the power detector we also
+	 * start a noise floor calibration, to measure the
+	 * card's noise floor (the noise we measure when we are not
+	 * transmiting or receiving anything).
+	 *
+	 * If we are in a noisy environment AGC calibration may time
+	 * out and/or noise floor calibration might timeout.
+	 */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+				AR5K_PHY_AGCCTL_CAL);
+
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
+	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+			AR5K_PHY_AGCCTL_CAL, 0, false)) {
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+			channel->center_freq);
+	}
+
+	/*
+	 * If we run NF calibration before AGC, it always times out.
+	 * Binary HAL starts NF and AGC calibration at the same time
+	 * and only waits for AGC to finish. Also if AGC or NF cal.
+	 * times out, reset doesn't fail on binary HAL. I believe
+	 * that's wrong because since rx path is routed to a detector,
+	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
+	 * enables noise floor calibration after offset calibration and if noise
+	 * floor calibration fails, reset fails. I believe that's
+	 * a better approach, we just need to find a polling interval
+	 * that suits best, even if reset continues we need to make
+	 * sure that rx path is ready.
+	 */
+	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+
+
+	/*
+	 * Configure QCUs/DCUs
+	 */
+
+	/* TODO: HW Compression support for data queues */
+	/* TODO: Burst prefetch for data queues */
+
+	/*
+	 * Reset queues and start beacon timers at the end of the reset routine
+	 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+	 * Note: If we want we can assign multiple qcus on one dcu.
+	 */
+	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+		ret = ath5k_hw_reset_tx_queue(ah, i);
+		if (ret) {
+			ATH5K_ERR(ah->ah_sc,
+				"failed to reset TX queue #%d\n", i);
+			return ret;
+		}
+	}
+
+
+	/*
+	 * Configure DMA/Interrupts
+	 */
+
+	/*
+	 * Set Rx/Tx DMA Configuration
+	 *
+	 * Set standard DMA size (128). Note that
+	 * a DMA size of 512 causes rx overruns and tx errors
+	 * on pci-e cards (tested on 5424 but since rx overruns
+	 * also occur on 5416/5418 with madwifi we set 128
+	 * for all PCI-E cards to be safe).
+	 *
+	 * XXX: need to check 5210 for this
+	 * TODO: Check out tx triger level, it's always 64 on dumps but I
+	 * guess we can tweak it and see how it goes ;-)
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+			AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+			AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+	}
+
+	/* Pre-enable interrupts on 5211/5212*/
+	if (ah->ah_version != AR5K_AR5210)
+		ath5k_hw_set_imr(ah, ah->ah_imr);
+
+	/*
+	 * Setup RFKill interrupt if rfkill flag is set on eeprom.
+	 * TODO: Use gpio pin and polarity infos from eeprom
+	 * TODO: Handle this in ath5k_intr because it'll result
+	 * 	 a nasty interrupt storm.
+	 */
+#if 0
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+		ath5k_hw_set_gpio_input(ah, 0);
+		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+		if (ah->ah_gpio[0] == 0)
+			ath5k_hw_set_gpio_intr(ah, 0, 1);
+		else
+			ath5k_hw_set_gpio_intr(ah, 0, 0);
+	}
+#endif
+
+	/* Enable 32KHz clock function for AR5212+ chips
+	 * Set clocks to 32KHz operation and use an
+	 * external 32KHz crystal when sleeping if one
+	 * exists */
+	if (ah->ah_version == AR5K_AR5212)
+			ath5k_hw_set_sleep_clock(ah, true);
+
+	/*
+	 * Disable beacons and reset the register
+	 */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+			AR5K_BEACON_RESET_TSF);
+
+	return 0;
+}
+
+#undef _ATH5K_RESET