ath6kl: support for P2P mgmt operations on station interface

This patch enables support for doing P2P management operations like device
discovery on top of a station interface. After group formation, the station
interface will become a P2P GO/client interface as the case may be.

This feature requires modifications to a couple of existing WMI structures and
therefore new command ids and structures have been defined in order to be
compatible with older firmware versions and other chips. The exception here is
the wmi_connect_cmd. Adding a new field to the end of the structure will not
cause any issues with previous firmware versions since firmware only checks for
minimum length of the command. The other structures are of variable length,
hence it was not possible to add new fields to the end.

The new command ids have to be added to the end of enum wmi_cmd_id, so it has
updated to match the firmware.

The driver will support both the 'old' and the 'new' commands for a while by
checking the firmware capabilities.

Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 52 insertions, 8 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 48d414acefee..abe3af3c6188 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -413,6 +413,7 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 	struct ath6kl *ar = ath6kl_priv(dev);
 	struct ath6kl_vif *vif = netdev_priv(dev);
 	int status;
+	u8 nw_subtype = (ar->p2p) ? SUBTYPE_P2PDEV : SUBTYPE_NONE;
 
 	ath6kl_cfg80211_sscan_disable(vif);
 
@@ -555,6 +556,9 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	vif->nw_type = vif->next_mode;
 
+	if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT)
+		nw_subtype = SUBTYPE_P2PCLIENT;
+
 	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
 		   "%s: connect called with authmode %d dot11 auth %d"
 		   " PW crypto %d PW crypto len %d GRP crypto %d"
@@ -572,7 +576,7 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 					vif->grp_crypto, vif->grp_crypto_len,
 					vif->ssid_len, vif->ssid,
 					vif->req_bssid, vif->ch_hint,
-					ar->connect_ctrl_flags);
+					ar->connect_ctrl_flags, nw_subtype);
 
 	up(&ar->sem);
 
@@ -914,9 +918,25 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 	if (test_bit(CONNECTED, &vif->flags))
 		force_fg_scan = 1;
 
-	ret = ath6kl_wmi_startscan_cmd(ar->wmi, vif->fw_vif_idx, WMI_LONG_SCAN,
-				       force_fg_scan, false, 0, 0, n_channels,
-				       channels);
+	if (test_bit(ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX,
+		    ar->fw_capabilities)) {
+		/*
+		 * If capable of doing P2P mgmt operations using
+		 * station interface, send additional information like
+		 * supported rates to advertise and xmit rates for
+		 * probe requests
+		 */
+		ret = ath6kl_wmi_beginscan_cmd(ar->wmi, vif->fw_vif_idx,
+						WMI_LONG_SCAN, force_fg_scan,
+						false, 0, 0, n_channels,
+						channels, request->no_cck,
+						request->rates);
+	} else {
+		ret = ath6kl_wmi_startscan_cmd(ar->wmi, vif->fw_vif_idx,
+						WMI_LONG_SCAN, force_fg_scan,
+						false, 0, 0, n_channels,
+						channels);
+	}
 	if (ret)
 		ath6kl_err("wmi_startscan_cmd failed\n");
 	else
@@ -1485,7 +1505,7 @@ static int ath6kl_cfg80211_join_ibss(struct wiphy *wiphy,
 					vif->grp_crypto, vif->grp_crypto_len,
 					vif->ssid_len, vif->ssid,
 					vif->req_bssid, vif->ch_hint,
-					ar->connect_ctrl_flags);
+					ar->connect_ctrl_flags, SUBTYPE_NONE);
 	set_bit(CONNECT_PEND, &vif->flags);
 
 	return 0;
@@ -2192,6 +2212,16 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev,
 	p.dot11_auth_mode = vif->dot11_auth_mode;
 	p.ch = cpu_to_le16(vif->next_chan);
 
+	if (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) {
+		p.nw_subtype = SUBTYPE_P2PGO;
+	} else {
+		/*
+		 * Due to firmware limitation, it is not possible to
+		 * do P2P mgmt operations in AP mode
+		 */
+		p.nw_subtype = SUBTYPE_NONE;
+	}
+
 	res = ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx, &p);
 	if (res < 0)
 		return res;
@@ -2357,9 +2387,23 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
 	}
 
 	*cookie = id;
-	return ath6kl_wmi_send_action_cmd(ar->wmi, vif->fw_vif_idx, id,
-					  chan->center_freq, wait,
-					  buf, len);
+
+	if (test_bit(ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX,
+		    ar->fw_capabilities)) {
+		/*
+		 * If capable of doing P2P mgmt operations using
+		 * station interface, send additional information like
+		 * supported rates to advertise and xmit rates for
+		 * probe requests
+		 */
+		return ath6kl_wmi_send_mgmt_cmd(ar->wmi, vif->fw_vif_idx, id,
+						chan->center_freq, wait,
+						buf, len, no_cck);
+	} else {
+		return ath6kl_wmi_send_action_cmd(ar->wmi, vif->fw_vif_idx, id,
+						  chan->center_freq, wait,
+						  buf, len);
+	}
 }
 
 static void ath6kl_mgmt_frame_register(struct wiphy *wiphy,