Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes

1 files changed, 695 insertions, 239 deletions

diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 30629b3e37c2..7562bf173d3e 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -53,7 +53,7 @@
 #define AR5K_CR_TXD0	0x00000008	/* TX Disable for queue 0 on 5210 */
 #define AR5K_CR_TXD1	0x00000010	/* TX Disable for queue 1 on 5210 */
 #define	AR5K_CR_RXD	0x00000020	/* RX Disable */
-#define	AR5K_CR_SWI	0x00000040
+#define	AR5K_CR_SWI	0x00000040	/* Software Interrupt */
 
 /*
  * RX Descriptor Pointer register
@@ -65,19 +65,19 @@
  */
 #define	AR5K_CFG		0x0014			/* Register Address */
 #define	AR5K_CFG_SWTD		0x00000001	/* Byte-swap TX descriptor (for big endian archs) */
-#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer (?) */
+#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer */
 #define	AR5K_CFG_SWRD		0x00000004	/* Byte-swap RX descriptor */
-#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer (?) */
-#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register values (?) */
-#define AR5K_CFG_ADHOC		0x00000020 	/* [5211+] */
+#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer */
+#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register access */
+#define AR5K_CFG_ADHOC		0x00000020 	/* AP/Adhoc indication [5211+] */
 #define AR5K_CFG_PHY_OK		0x00000100	/* [5211+] */
 #define AR5K_CFG_EEBS		0x00000200	/* EEPROM is busy */
-#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (?) */
+#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (Disable dynamic clock) */
 #define AR5K_CFG_TXCNT		0x00007800	/* Tx frame count (?) [5210] */
 #define AR5K_CFG_TXCNT_S	11
 #define AR5K_CFG_TXFSTAT	0x00008000	/* Tx frame status (?) [5210] */
 #define AR5K_CFG_TXFSTRT	0x00010000	/* [5210] */
-#define	AR5K_CFG_PCI_THRES	0x00060000	/* [5211+] */
+#define	AR5K_CFG_PCI_THRES	0x00060000	/* PCI Master req q threshold [5211+] */
 #define	AR5K_CFG_PCI_THRES_S	17
 
 /*
@@ -162,35 +162,40 @@
 /*
  * Transmit configuration register
  */
-#define AR5K_TXCFG		0x0030			/* Register Address */
-#define AR5K_TXCFG_SDMAMR	0x00000007	/* DMA size */
-#define AR5K_TXCFG_SDMAMR_S	0
-#define AR5K_TXCFG_B_MODE	0x00000008	/* Set b mode for 5111 (enable 2111) */
-#define AR5K_TXCFG_TXFSTP	0x00000008	/* TX DMA full Stop [5210] */
-#define AR5K_TXCFG_TXFULL	0x000003f0	/* TX Triger level mask */
-#define AR5K_TXCFG_TXFULL_S	4
-#define AR5K_TXCFG_TXFULL_0B	0x00000000
-#define AR5K_TXCFG_TXFULL_64B	0x00000010
-#define AR5K_TXCFG_TXFULL_128B	0x00000020
-#define AR5K_TXCFG_TXFULL_192B	0x00000030
-#define AR5K_TXCFG_TXFULL_256B	0x00000040
-#define AR5K_TXCFG_TXCONT_EN	0x00000080
-#define AR5K_TXCFG_DMASIZE	0x00000100	/* Flag for passing DMA size [5210] */
-#define AR5K_TXCFG_JUMBO_TXE	0x00000400	/* Enable jumbo frames transmition (?) [5211+] */
-#define AR5K_TXCFG_RTSRND	0x00001000	/* [5211+] */
-#define AR5K_TXCFG_FRMPAD_DIS	0x00002000	/* [5211+] */
-#define AR5K_TXCFG_RDY_DIS	0x00004000	/* [5211+] */
+#define AR5K_TXCFG			0x0030			/* Register Address */
+#define AR5K_TXCFG_SDMAMR		0x00000007	/* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S		0
+#define AR5K_TXCFG_B_MODE		0x00000008	/* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP		0x00000008	/* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL		0x000003f0	/* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S		4
+#define AR5K_TXCFG_TXFULL_0B		0x00000000
+#define AR5K_TXCFG_TXFULL_64B		0x00000010
+#define AR5K_TXCFG_TXFULL_128B		0x00000020
+#define AR5K_TXCFG_TXFULL_192B		0x00000030
+#define AR5K_TXCFG_TXFULL_256B		0x00000040
+#define AR5K_TXCFG_TXCONT_EN		0x00000080
+#define AR5K_TXCFG_DMASIZE		0x00000100	/* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN	0x00000400	/* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM	0x00000800	/* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS	0x00001000	/* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND		0x00001000	/* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS		0x00002000	/* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS		0x00004000	/* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE	0x00008000	/* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_CACHING_DIS	0x00010000	/* Disable DCU caching */
 
 /*
  * Receive configuration register
  */
 #define AR5K_RXCFG		0x0034			/* Register Address */
-#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size */
+#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size (write) */
 #define AR5K_RXCFG_SDMAMW_S	0
-#define	AR5K_RXCFG_DEF_ANTENNA	0x00000008	/* Default antenna */
-#define AR5K_RXCFG_ZLFDMA	0x00000010	/* Zero-length DMA */
-#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo frames reception (?) [5211+] */
-#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames (?) [5211+] */
+#define AR5K_RXCFG_ZLFDMA	0x00000008	/* Enable Zero-length frame DMA */
+#define	AR5K_RXCFG_DEF_ANTENNA	0x00000010	/* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY	0x00000080	/* Sleep entry policy */
 
 /*
  * Receive jumbo descriptor last address register
@@ -202,35 +207,35 @@
  * MIB control register
  */
 #define AR5K_MIBC		0x0040			/* Register Address */
-#define AR5K_MIBC_COW		0x00000001
-#define AR5K_MIBC_FMC		0x00000002	/* Freeze Mib Counters (?) */
-#define AR5K_MIBC_CMC		0x00000004	/* Clean Mib Counters (?) */
-#define AR5K_MIBC_MCS		0x00000008
+#define AR5K_MIBC_COW		0x00000001	/* Warn test indicator */
+#define AR5K_MIBC_FMC		0x00000002	/* Freeze MIB Counters  */
+#define AR5K_MIBC_CMC		0x00000004	/* Clean MIB Counters  */
+#define AR5K_MIBC_MCS		0x00000008	/* MIB counter strobe */
 
 /*
  * Timeout prescale register
  */
 #define AR5K_TOPS		0x0044
-#define	AR5K_TOPS_M		0x0000ffff	/* [5211+] (?) */
+#define	AR5K_TOPS_M		0x0000ffff
 
 /*
  * Receive timeout register (no frame received)
  */
 #define AR5K_RXNOFRM		0x0048
-#define	AR5K_RXNOFRM_M		0x000003ff	/* [5211+] (?) */
+#define	AR5K_RXNOFRM_M		0x000003ff
 
 /*
  * Transmit timeout register (no frame sent)
  */
 #define AR5K_TXNOFRM		0x004c
-#define	AR5K_TXNOFRM_M		0x000003ff	/* [5211+] (?) */
-#define	AR5K_TXNOFRM_QCU	0x000ffc00	/* [5211+] (?) */
+#define	AR5K_TXNOFRM_M		0x000003ff
+#define	AR5K_TXNOFRM_QCU	0x000ffc00
 
 /*
  * Receive frame gap timeout register
  */
 #define AR5K_RPGTO		0x0050
-#define AR5K_RPGTO_M		0x000003ff	/* [5211+] (?) */
+#define AR5K_RPGTO_M		0x000003ff
 
 /*
  * Receive frame count limit register
@@ -241,6 +246,7 @@
 
 /*
  * Misc settings register
+ * (reserved0-3)
  */
 #define AR5K_MISC		0x0058			/* Register Address */
 #define	AR5K_MISC_DMA_OBS_M	0x000001e0
@@ -256,6 +262,7 @@
 
 /*
  * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
  */
 #define	AR5K_QCUDCU_CLKGT	0x005c			/* Register Address (?) */
 #define	AR5K_QCUDCU_CLKGT_QCU	0x0000ffff	/* Mask for QCU clock */
@@ -284,18 +291,18 @@
 #define AR5K_ISR_TXEOL		0x00000400	/* Empty TX descriptor */
 #define AR5K_ISR_TXURN		0x00000800	/* Transmit FIFO underrun */
 #define AR5K_ISR_MIB		0x00001000	/* Update MIB counters */
-#define AR5K_ISR_SWI		0x00002000	/* Software interrupt (?) */
+#define AR5K_ISR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
-#define AR5K_ISR_RXKCM		0x00008000
+#define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
 #define AR5K_ISR_BRSSI		0x00020000
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_ISR_MCABT		0x00100000	/* [5210] */
-#define AR5K_ISR_RXCHIRP	0x00200000	/* [5212+] */
-#define AR5K_ISR_SSERR		0x00200000	/* [5210] */
-#define AR5K_ISR_DPERR		0x00400000	/* [5210] */
+#define AR5K_ISR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_ISR_TIM		0x00800000	/* [5210] */
 #define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -320,14 +327,14 @@
 
 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
-#define	AR5K_SISR2_MCABT	0x00100000
-#define	AR5K_SISR2_SSERR	0x00200000
-#define	AR5K_SISR2_DPERR	0x00400000
+#define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
+#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
@@ -368,18 +375,18 @@
 #define AR5K_IMR_TXEOL		0x00000400	/* Empty TX descriptor*/
 #define AR5K_IMR_TXURN		0x00000800	/* Transmit FIFO underrun*/
 #define AR5K_IMR_MIB		0x00001000	/* Update MIB counters*/
-#define AR5K_IMR_SWI		0x00002000
+#define AR5K_IMR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
-#define AR5K_IMR_RXKCM		0x00008000
+#define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
 #define AR5K_IMR_BRSSI		0x00020000
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_IMR_MCABT		0x00100000	/* [5210] */
-#define AR5K_IMR_RXCHIRP	0x00200000	/* [5212+]*/
-#define AR5K_IMR_SSERR		0x00200000	/* [5210] */
-#define AR5K_IMR_DPERR		0x00400000	/* [5210] */
+#define AR5K_IMR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
 #define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -405,14 +412,14 @@
 #define AR5K_SIMR2		0x00ac			/* Register Address [5211+] */
 #define AR5K_SIMR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
 #define AR5K_SIMR2_QCU_TXURN_S	0
-#define	AR5K_SIMR2_MCABT	0x00100000
-#define	AR5K_SIMR2_SSERR	0x00200000
-#define	AR5K_SIMR2_DPERR	0x00400000
+#define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
+#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
@@ -425,23 +432,69 @@
 #define AR5K_SIMR4_QTRIG	0x000003ff	/* Mask for QTRIG */
 #define AR5K_SIMR4_QTRIG_S	0
 
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
 
 /*
  * Decompression mask registers [5212+]
  */
-#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (?)*/
-#define AR5K_DCM_DATA		0x0404		/*Decompression mask data (?)*/
+#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (index) */
+#define AR5K_DCM_DATA		0x0404		/*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define	AR5K_WOW_PCFG			0x0410			/* Register Address */
+#define	AR5K_WOW_PCFG_PAT_MATCH_EN	0x00000001	/* Pattern match enable */
+#define	AR5K_WOW_PCFG_LONG_FRAME_POL	0x00000002	/* Long frame policy */
+#define	AR5K_WOW_PCFG_WOBMISS		0x00000004	/* Wake on bea(con) miss (?) */
+#define	AR5K_WOW_PCFG_PAT_0_EN		0x00000100	/* Enable pattern 0 */
+#define	AR5K_WOW_PCFG_PAT_1_EN		0x00000200	/* Enable pattern 1 */
+#define	AR5K_WOW_PCFG_PAT_2_EN		0x00000400	/* Enable pattern 2 */
+#define	AR5K_WOW_PCFG_PAT_3_EN		0x00000800	/* Enable pattern 3 */
+#define	AR5K_WOW_PCFG_PAT_4_EN		0x00001000	/* Enable pattern 4 */
+#define	AR5K_WOW_PCFG_PAT_5_EN		0x00002000	/* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define	AR5K_WOW_PAT_IDX	0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define	AR5K_WOW_PAT_DATA	0x0418			/* Register Address */
+#define	AR5K_WOW_PAT_DATA_0_3_V	0x00000001	/* Pattern 0, 3 value */
+#define	AR5K_WOW_PAT_DATA_1_4_V	0x00000100	/* Pattern 1, 4 value */
+#define	AR5K_WOW_PAT_DATA_2_5_V	0x00010000	/* Pattern 2, 5 value */
+#define	AR5K_WOW_PAT_DATA_0_3_M	0x01000000	/* Pattern 0, 3 mask */
+#define	AR5K_WOW_PAT_DATA_1_4_M	0x04000000	/* Pattern 1, 4 mask */
+#define	AR5K_WOW_PAT_DATA_2_5_M	0x10000000	/* Pattern 2, 5 mask */
 
 /*
  * Decompression configuration registers [5212+]
  */
-#define AR5K_DCCFG		0x0420
+#define AR5K_DCCFG		0x0420			/* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN	0x00000001	/* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN	0x00000002	/* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN	0x00000004	/* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN	0x00000008	/* Enable decompression for mcast frames */
 
 /*
  * Compression configuration registers [5212+]
  */
-#define AR5K_CCFG		0x0600
-#define AR5K_CCFG_CUP		0x0604
+#define AR5K_CCFG		0x0600			/* Register Address */
+#define	AR5K_CCFG_WINDOW_SIZE	0x00000007	/* Compression window size */
+#define	AR5K_CCFG_CPC_EN	0x00000008	/* Enable performance counters */
+
+#define AR5K_CCFG_CCU		0x0604			/* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN	0x00000001	/* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT	0x00000002	/* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES	0x00000080	/* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT	0x00010000	/* CCU Catchup lit(?) count */
+#define	AR5K_CCFG_CCU_INIT	0x00100200	/* Initial value during reset */
 
 /*
  * Compression performance counter registers [5212+]
@@ -450,7 +503,7 @@
 #define AR5K_CPC1		0x0614		/* Compression performance counter 1*/
 #define AR5K_CPC2		0x0618		/* Compression performance counter 2 */
 #define AR5K_CPC3		0x061c		/* Compression performance counter 3 */
-#define AR5K_CPCORN		0x0620		/* Compression performance overrun (?) */
+#define AR5K_CPCOVF		0x0620		/* Compression performance overflow */
 
 
 /*
@@ -466,8 +519,6 @@
  * set/clear, which contain status for all queues (we shift by 1 for each
  * queue). To access these registers easily we define some macros here
  * that are used inside HAL. For more infos check out *_tx_queue functs.
- *
- * TODO: Boundary checking on macros (here?)
  */
 
 /*
@@ -513,7 +564,6 @@
 #define	AR5K_QCU_RDYTIMECFG_BASE	0x0900	/* Register Address - Queue0 RDYTIMECFG */
 #define	AR5K_QCU_RDYTIMECFG_INTVAL	0x00ffffff	/* Ready time interval mask */
 #define AR5K_QCU_RDYTIMECFG_INTVAL_S	0
-#define	AR5K_QCU_RDYTIMECFG_DURATION	0x00ffffff	/* Ready time duration mask */
 #define	AR5K_QCU_RDYTIMECFG_ENABLE	0x01000000	/* Ready time enable mask */
 #define AR5K_QUEUE_RDYTIMECFG(_q)	AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
 
@@ -534,19 +584,20 @@
  */
 #define AR5K_QCU_MISC_BASE		0x09c0			/* Register Address -Queue0 MISC */
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
-#define	AR5K_QCU_MISC_FRSHED_ASAP	0		/* ASAP */
-#define	AR5K_QCU_MISC_FRSHED_CBR	1		/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT	2		/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT	3		/* Time gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
+#define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
 #define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
 #define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
 #define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
-#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Beacons enabled */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled (?) */
-#define	AR5K_QCU_MISC_TXE		0x00000200	/* TXE reset when RDYTIME enalbed (?) */
-#define	AR5K_QCU_MISC_CBR		0x00000400	/* CBR threshold reset (?) */
-#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU reset (?) */
+#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
+#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
 #define AR5K_QUEUE_MISC(_q)		AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
 
 
@@ -555,7 +606,7 @@
  */
 #define AR5K_QCU_STS_BASE	0x0a00			/* Register Address - Queue0 STS */
 #define	AR5K_QCU_STS_FRMPENDCNT	0x00000003	/* Frames pending counter */
-#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter (?) */
+#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter */
 #define	AR5K_QUEUE_STATUS(_q)	AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
 
 /*
@@ -569,9 +620,11 @@
  */
 #define AR5K_QCU_CBB_SELECT	0x0b00
 #define AR5K_QCU_CBB_ADDR	0x0b04
+#define AR5K_QCU_CBB_ADDR_S	9
 
 /*
  * QCU compression buffer configuration register [5212+]
+ * (buffer size)
  */
 #define AR5K_QCU_CBCFG		0x0b08
 
@@ -652,80 +705,100 @@
  * No lockout means there is no special handling.
  */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff setting (?) */
+#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
-#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll (?) */
-#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff (?) */
-#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch (?) */
+#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
+#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
+#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
-#define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED	1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	2
-#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Beacon enable (?) */
+#define	AR5K_DCU_MISC_VIRTCOL_NORMAL		0
+#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
-#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE	0		/* No arbiter lockout */
+#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE		0	/* No arbiter lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM	1	/* Intra-frame lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL	2	/* Global lockout */
-#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000
-#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment (?) */
-#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff (?) */
-#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision policy (?) */
-#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000
+#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000	/* Ignore Arbiter lockout */
+#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment */
+#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff */
+#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision cw policy */
+#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000	/* Blown IFS policy (?) */
 #define	AR5K_DCU_MISC_SEQNUM_CTL	0x01000000	/* Sequence number control (?) */
 #define AR5K_QUEUE_DFS_MISC(_q)		AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
 
 /*
  * DCU frame sequence number registers
  */
-#define AR5K_DCU_SEQNUM_BASE	0x1140
-#define	AR5K_DCU_SEQNUM_M	0x00000fff
+#define AR5K_DCU_SEQNUM_BASE		0x1140
+#define	AR5K_DCU_SEQNUM_M		0x00000fff
 #define	AR5K_QUEUE_DFS_SEQNUM(_q)	AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
 
 /*
- * DCU global IFS SIFS registers
+ * DCU global IFS SIFS register
  */
 #define AR5K_DCU_GBL_IFS_SIFS	0x1030
 #define AR5K_DCU_GBL_IFS_SIFS_M	0x0000ffff
 
 /*
- * DCU global IFS slot interval registers
+ * DCU global IFS slot interval register
  */
 #define AR5K_DCU_GBL_IFS_SLOT	0x1070
 #define AR5K_DCU_GBL_IFS_SLOT_M	0x0000ffff
 
 /*
- * DCU global IFS EIFS registers
+ * DCU global IFS EIFS register
  */
 #define AR5K_DCU_GBL_IFS_EIFS	0x10b0
 #define AR5K_DCU_GBL_IFS_EIFS_M	0x0000ffff
 
 /*
- * DCU global IFS misc registers
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand corectly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
  */
 #define AR5K_DCU_GBL_IFS_MISC			0x10f0			/* Register Address */
-#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007
-#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00
-#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000
+#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007	/* LFSR Slice Select */
+#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
+#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */
 
 /*
  * DCU frame prefetch control register
  */
-#define AR5K_DCU_FP		0x1230
+#define AR5K_DCU_FP			0x1230			/* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN	0x00000001	/* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN		0x00000010	/* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN	0x00000020	/* Enable burst prefetch on DCU (?) */
 
 /*
  * DCU transmit pause control/status register
  */
 #define AR5K_DCU_TXP		0x1270			/* Register Address */
-#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask (?) */
-#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status (?) */
+#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask */
+#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE	0x1038
+#define	AR5K_DCU_TX_FILTER_0(_n)	(AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
 
 /*
- * DCU transmit filter register
+ * DCU transmit filter table 1 (16 entries)
  */
-#define AR5K_DCU_TX_FILTER	0x1038
+#define AR5K_DCU_TX_FILTER_1_BASE	0x103c
+#define	AR5K_DCU_TX_FILTER_1(_n)	(AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64))
 
 /*
  * DCU clear transmit filter register
@@ -739,9 +812,6 @@
 
 /*
  * Reset control register
- *
- * 4 and 8 are not used in 5211/5212 and
- * 2 means "baseband reset" on 5211/5212.
  */
 #define AR5K_RESET_CTL		0x4000			/* Register Address */
 #define AR5K_RESET_CTL_PCU	0x00000001	/* Protocol Control Unit reset */
@@ -765,6 +835,7 @@
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
 #define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
+/* more bits */
 
 /*
  * Interrupt pending register
@@ -776,13 +847,14 @@
  * Sleep force register
  */
 #define AR5K_SFR	0x400c
-#define AR5K_SFR_M	0x00000001
+#define AR5K_SFR_EN	0x00000001
 
 /*
  * PCI configuration register
  */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
+#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
@@ -798,19 +870,21 @@
 #define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
 #define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define AR5K_PCICFG_SL_INPEN		0x00002800	/* Sleep even whith pending interrupts (?) */
+#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROM	0x00020000	/* Default mode (blink on any traffic) [5211+] */
 #define AR5K_PCICFG_LEDMODE_PWR		0x00040000	/* Some other blinking mode  (?) [5211+] */
 #define AR5K_PCICFG_LEDMODE_RAND	0x00060000	/* Random blinking (?) [5211+] */
-#define AR5K_PCICFG_LEDBLINK		0x00700000
+#define AR5K_PCICFG_LEDBLINK		0x00700000	/* Led blink rate */
 #define AR5K_PCICFG_LEDBLINK_S		20
-#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slow led blink rate (?) [5211+] */
+#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slowest led blink rate [5211+] */
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
 
 /*
  * "General Purpose Input/Output" (GPIO) control register
@@ -947,7 +1021,7 @@
 #define AR5K_EEPROM_VERSION_4_4		0x4004
 #define AR5K_EEPROM_VERSION_4_5		0x4005
 #define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x3007
+#define AR5K_EEPROM_VERSION_4_7		0x4007
 
 #define AR5K_EEPROM_MODE_11A		0
 #define AR5K_EEPROM_MODE_11B		1
@@ -1023,10 +1097,14 @@
 #define AR5K_EEPROM_STAT_WRDONE	0x00000008	/* EEPROM write successful */
 
 /*
- * EEPROM config register (?)
+ * EEPROM config register
  */
-#define AR5K_EEPROM_CFG	0x6010
-
+#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */
 
 
 /*
@@ -1050,7 +1128,7 @@
 #define AR5K_STA_ID1			0x8004			/* Register Address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
-#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting (?) */
+#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
 #define AR5K_STA_ID1_NO_KEYSRCH		0x00080000	/* No key search */
 #define AR5K_STA_ID1_NO_PSPOLL		0x00100000	/* No power save polling [5210] */
 #define AR5K_STA_ID1_PCF_5211		0x00100000	/* Enable PCF on [5211+] */
@@ -1059,9 +1137,13 @@
 					AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
 #define AR5K_STA_ID1_DEFAULT_ANTENNA	0x00200000	/* Use default antenna */
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
-#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS (?) */
-#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS (?) */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
 #define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
+#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
 
 /*
  * First BSSID register (MAC address, lower 32bits)
@@ -1117,7 +1199,7 @@
  *
  * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
  */
-#define AR5K_NODCU_RETRY_LMT		0x801c			/*Register Address */
+#define AR5K_NODCU_RETRY_LMT		0x801c			/* Register Address */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY	0x0000000f	/* Short retry limit mask */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S	0
 #define AR5K_NODCU_RETRY_LMT_LG_RETRY	0x000000f0	/* Long retry mask */
@@ -1136,9 +1218,9 @@
 #define AR5K_USEC_5211			0x801c			/* Register Address [5211+] */
 #define AR5K_USEC			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_USEC_5210 : AR5K_USEC_5211)
-#define AR5K_USEC_1			0x0000007f
+#define AR5K_USEC_1			0x0000007f	/* clock cycles for 1us */
 #define AR5K_USEC_1_S			0
-#define AR5K_USEC_32			0x00003f80
+#define AR5K_USEC_32			0x00003f80	/* clock cycles for 1us while on 32Mhz clock */
 #define AR5K_USEC_32_S			7
 #define AR5K_USEC_TX_LATENCY_5211	0x007fc000
 #define AR5K_USEC_TX_LATENCY_5211_S	14
@@ -1152,16 +1234,16 @@
 /*
  * PCU beacon control register
  */
-#define AR5K_BEACON_5210	0x8024
-#define AR5K_BEACON_5211	0x8020
+#define AR5K_BEACON_5210	0x8024			/*Register Address [5210] */
+#define AR5K_BEACON_5211	0x8020			/*Register Address [5211+] */
 #define AR5K_BEACON		(ah->ah_version == AR5K_AR5210 ? \
 				AR5K_BEACON_5210 : AR5K_BEACON_5211)
-#define AR5K_BEACON_PERIOD	0x0000ffff
+#define AR5K_BEACON_PERIOD	0x0000ffff	/* Mask for beacon period */
 #define AR5K_BEACON_PERIOD_S	0
-#define AR5K_BEACON_TIM		0x007f0000
+#define AR5K_BEACON_TIM		0x007f0000	/* Mask for TIM offset */
 #define AR5K_BEACON_TIM_S	16
-#define AR5K_BEACON_ENABLE	0x00800000
-#define AR5K_BEACON_RESET_TSF	0x01000000
+#define AR5K_BEACON_ENABLE	0x00800000	/* Enable beacons */
+#define AR5K_BEACON_RESET_TSF	0x01000000	/* Force TSF reset */
 
 /*
  * CFP period register
@@ -1234,7 +1316,6 @@
 
 /*
  * Receive filter register
- * TODO: Get these out of ar5xxx.h on ath5k
  */
 #define AR5K_RX_FILTER_5210	0x804c			/* Register Address [5210] */
 #define AR5K_RX_FILTER_5211	0x803c			/* Register Address [5211+] */
@@ -1307,11 +1388,11 @@
 #define AR5K_DIAG_SW_5211		0x8048			/* Register Address [5211+] */
 #define AR5K_DIAG_SW			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
-#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001
-#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs (?) */
-#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs (?) */
-#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption (?) */
-#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption (?) */
+#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001	/* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption */
+#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption */
 #define AR5K_DIAG_SW_DIS_TX		0x00000020	/* Disable transmit [5210] */
 #define AR5K_DIAG_SW_DIS_RX_5210	0x00000040	/* Disable recieve */
 #define AR5K_DIAG_SW_DIS_RX_5211	0x00000020
@@ -1329,13 +1410,13 @@
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Scrambler seed (?) */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
 #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
 #define AR5K_DIAG_SW_SCVRAM_SEED	0x0003f800	/* [5210] */
-#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask (?) */
+#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask */
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
@@ -1344,6 +1425,7 @@
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
 #define AR5K_DIAG_SW_OBSPT_M		0x000c0000
 #define AR5K_DIAG_SW_OBSPT_S		18
+/* more bits */
 
 /*
  * TSF (clock) register (lower 32 bits)
@@ -1369,15 +1451,34 @@
 /*
  * ADDAC test register [5211+]
  */
-#define AR5K_ADDAC_TEST	0x8054
-#define AR5K_ADDAC_TEST_TXCONT 0x00000001
+#define AR5K_ADDAC_TEST			0x8054			/* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT 		0x00000001	/* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE	0x00000002	/* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN		0x00000004	/* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN	0x00000008	/* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8		0x00004000	/* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB		0x00008000	/* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL	0x00010000	/* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY	0x00020000	/* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT		0x00040000	/* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE		0x00080000	/* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM		0x00100000	/* Test ARM (Adaptive Radio Mode ?) */
 
 /*
  * Default antenna register [5211+]
  */
 #define AR5K_DEFAULT_ANTENNA	0x8058
 
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM	0x805c
 
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK	0x8060
 
 /*
  * Retry count register [5210]
@@ -1449,124 +1550,242 @@
 /*
  * XR (eXtended Range) mode register
  */
-#define AR5K_XRMODE			0x80c0
-#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f
+#define AR5K_XRMODE			0x80c0			/* Register Address */
+#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f	/* Mask for Poll type (?) */
 #define	AR5K_XRMODE_POLL_TYPE_S		0
-#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c
+#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c	/* Mask for Poll subtype (?) */
 #define	AR5K_XRMODE_POLL_SUBTYPE_S	2
-#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080
-#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00
-#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000
+#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080	/* Wait for poll */
+#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00	/* Mask for SIFS delay */
+#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000	/* Mask for frame hold (?) */
 #define	AR5K_XRMODE_FRAME_HOLD_S	20
 
 /*
  * XR delay register
  */
-#define AR5K_XRDELAY			0x80c4
-#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff
+#define AR5K_XRDELAY			0x80c4			/* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff	/* Mask for slot delay */
 #define AR5K_XRDELAY_SLOT_DELAY_S	0
-#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000
+#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000	/* Mask for CHIRP data delay */
 #define AR5K_XRDELAY_CHIRP_DELAY_S	16
 
 /*
  * XR timeout register
  */
-#define AR5K_XRTIMEOUT			0x80c8
-#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff
+#define AR5K_XRTIMEOUT			0x80c8			/* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff	/* Mask for CHIRP timeout */
 #define AR5K_XRTIMEOUT_CHIRP_S		0
-#define AR5K_XRTIMEOUT_POLL_M		0xffff0000
+#define AR5K_XRTIMEOUT_POLL_M		0xffff0000	/* Mask for Poll timeout */
 #define AR5K_XRTIMEOUT_POLL_S		16
 
 /*
  * XR chirp register
  */
-#define AR5K_XRCHIRP			0x80cc
-#define AR5K_XRCHIRP_SEND		0x00000001
-#define AR5K_XRCHIRP_GAP		0xffff0000
+#define AR5K_XRCHIRP			0x80cc			/* Register Address */
+#define AR5K_XRCHIRP_SEND		0x00000001	/* Send CHIRP */
+#define AR5K_XRCHIRP_GAP		0xffff0000	/* Mask for CHIRP gap (?) */
 
 /*
  * XR stomp register
  */
-#define AR5K_XRSTOMP			0x80d0
-#define AR5K_XRSTOMP_TX			0x00000001
-#define AR5K_XRSTOMP_RX_ABORT		0x00000002
-#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00
+#define AR5K_XRSTOMP			0x80d0			/* Register Address */
+#define AR5K_XRSTOMP_TX			0x00000001	/* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX			0x00000002	/* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI		0x00000004	/* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID		0x00000008	/* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA		0x00000010	/* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00	/* Mask for XR RSSI threshold */
 
 /*
  * First enhanced sleep register
  */
-#define AR5K_SLEEP0			0x80d4
-#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff
+#define AR5K_SLEEP0			0x80d4			/* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff	/* Mask for next DTIM (?) */
 #define AR5K_SLEEP0_NEXT_DTIM_S		0
-#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000
-#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000
-#define AR5K_SLEEP0_CABTO		0xff000000
+#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000	/* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000	/* Enable enchanced sleep control */
+#define AR5K_SLEEP0_CABTO		0xff000000	/* Mask for CAB Time Out */
 #define AR5K_SLEEP0_CABTO_S		24
 
 /*
  * Second enhanced sleep register
  */
-#define AR5K_SLEEP1			0x80d8
-#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff
+#define AR5K_SLEEP1			0x80d8			/* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff	/* Mask for next TIM (?) */
 #define AR5K_SLEEP1_NEXT_TIM_S		0
-#define AR5K_SLEEP1_BEACON_TO		0xff000000
+#define AR5K_SLEEP1_BEACON_TO		0xff000000	/* Mask for Beacon Time Out */
 #define AR5K_SLEEP1_BEACON_TO_S		24
 
 /*
  * Third enhanced sleep register
  */
-#define AR5K_SLEEP2			0x80dc
-#define AR5K_SLEEP2_TIM_PER		0x0000ffff
+#define AR5K_SLEEP2			0x80dc			/* Register Address */
+#define AR5K_SLEEP2_TIM_PER		0x0000ffff	/* Mask for TIM period (?) */
 #define AR5K_SLEEP2_TIM_PER_S		0
-#define AR5K_SLEEP2_DTIM_PER		0xffff0000
+#define AR5K_SLEEP2_DTIM_PER		0xffff0000	/* Mask for DTIM period (?) */
 #define AR5K_SLEEP2_DTIM_PER_S		16
 
 /*
  * BSSID mask registers
  */
-#define AR5K_BSS_IDM0			0x80e0
-#define AR5K_BSS_IDM1			0x80e4
+#define AR5K_BSS_IDM0			0x80e0	/* Upper bits */
+#define AR5K_BSS_IDM1			0x80e4	/* Lower bits */
 
 /*
  * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dbm) or DBM ?
+ *
+ * XXX: Mask changes for newer chips to 7f
+ *      like tx power table ?
  */
-#define AR5K_TXPC			0x80e8
-#define AR5K_TXPC_ACK_M			0x0000003f
+#define AR5K_TXPC			0x80e8			/* Register Address */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00
+#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
 #define AR5K_TXPC_CHIRP_S		22
 
 /*
  * Profile count registers
  */
-#define AR5K_PROFCNT_TX			0x80ec
-#define AR5K_PROFCNT_RX			0x80f0
-#define AR5K_PROFCNT_RXCLR		0x80f4
-#define AR5K_PROFCNT_CYCLE		0x80f8
+#define AR5K_PROFCNT_TX			0x80ec	/* Tx count */
+#define AR5K_PROFCNT_RX			0x80f0	/* Rx count */
+#define AR5K_PROFCNT_RXCLR		0x80f4	/* Clear Rx count */
+#define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */
+
+/*
+ * Quiet (period) control registers (?)
+ */
+#define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL2			0x8100			/* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
 
 /*
  * TSF parameter register
  */
-#define AR5K_TSF_PARM			0x8104
-#define AR5K_TSF_PARM_INC_M		0x000000ff
+#define AR5K_TSF_PARM			0x8104			/* Register Address */
+#define AR5K_TSF_PARM_INC_M		0x000000ff	/* Mask for TSF increment */
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
+ * QoS register (?)
+ */
+#define AR5K_QOS			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+
+/*
  * PHY error filter register
  */
 #define AR5K_PHY_ERR_FIL		0x810c
-#define AR5K_PHY_ERR_FIL_RADAR		0x00000020
-#define AR5K_PHY_ERR_FIL_OFDM		0x00020000
-#define AR5K_PHY_ERR_FIL_CCK		0x02000000
+#define AR5K_PHY_ERR_FIL_RADAR		0x00000020	/* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM		0x00020000	/* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK		0x02000000	/* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX		0x8110
 
 /*
- * Rate duration register
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS		0x8114			/* Register Address */
+#define AR5K_ACKSIFS_INC	0x00000000	/* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define	AR5K_MIC_QOS_CTL	0x8118			/* Register Address */
+#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
+#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
+#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
+#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
+#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
+#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
+#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
+#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
+#define	AR5K_MIC_QOS_CTL_MQ_EN	0x00010000	/* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define	AR5K_MIC_QOS_SEL	0x811c
+#define	AR5K_MIC_QOS_SEL_0	0x00000001
+#define	AR5K_MIC_QOS_SEL_1	0x00000010
+#define	AR5K_MIC_QOS_SEL_2	0x00000100
+#define	AR5K_MIC_QOS_SEL_3	0x00001000
+#define	AR5K_MIC_QOS_SEL_4	0x00010000
+#define	AR5K_MIC_QOS_SEL_5	0x00100000
+#define	AR5K_MIC_QOS_SEL_6	0x01000000
+#define	AR5K_MIC_QOS_SEL_7	0x10000000
+
+/*
+ * Misc mode control register (?)
+ */
+#define	AR5K_MISC_MODE			0x8120			/* Register Address */
+#define	AR5K_MISC_MODE_FBSSID_MATCH	0x00000001	/* Force BSSID match */
+#define	AR5K_MISC_MODE_ACKSIFS_MEM	0x00000002	/* ACK SIFS memory (?) */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define	AR5K_OFDM_FIL_CNT		0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define	AR5K_CCK_FIL_CNT		0x8128
+
+/*
+ * PHY Error Counters (?)
+ */
+#define	AR5K_PHYERR_CNT1		0x812c
+#define	AR5K_PHYERR_CNT1_MASK		0x8130
+
+#define	AR5K_PHYERR_CNT2		0x8134
+#define	AR5K_PHYERR_CNT2_MASK		0x8138
+
+/*
+ * TSF Threshold register (?)
+ */
+#define	AR5K_TSF_THRES			0x813c
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define	AR5K_RATE_ACKSIFS_BASE		0x8680			/* Register Address */
+#define	AR5K_RATE_ACKSIFS(_n)		(AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define	AR5K_RATE_ACKSIFS_NORMAL	0x00000001	/* Normal SIFS (field) */
+#define	AR5K_RATE_ACKSIFS_TURBO		0x00000400	/* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
  */
 #define AR5K_RATE_DUR_BASE		0x8700
 #define AR5K_RATE_DUR(_n)		(AR5K_RATE_DUR_BASE + ((_n) << 2))
 
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE		0x87c0
+#define AR5K_RATE2DB(_n)		(AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE		0x87e0
+#define AR5K_DB2RATE(_n)		(AR5K_DB2RATE_BASE + ((_n) << 2))
+
 /*===5212 end===*/
 
 /*
@@ -1613,12 +1832,34 @@
 /*===PHY REGISTERS===*/
 
 /*
- * PHY register
+ * PHY registers start
  */
 #define	AR5K_PHY_BASE			0x9800
 #define	AR5K_PHY(_n)			(AR5K_PHY_BASE + ((_n) << 2))
-#define AR5K_PHY_SHIFT_2GHZ		0x00004007
-#define AR5K_PHY_SHIFT_5GHZ		0x00000007
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define	AR5K_PHY_TST2			0x9800			/* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL		0x00000001	/* Trigger select (?) (field ?) */
+#define AR5K_PHY_TST2_TRIG		0x00000010	/* Trigger (?) (field ?) */
+#define AR5K_PHY_TST2_CBUS_MODE		0x00000100	/* Cardbus mode (?) */
+/* bit reserved */
+#define AR5K_PHY_TST2_CLK32		0x00000400	/* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN	0x00000800	/* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP	0x00001000	/* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN	0x00002000	/* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA	0x00004000	/* Alternate RFDATA (5-2GHz switch) */
+#define AR5K_PHY_TST2_MINI_OBS_EN	0x00008000	/* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV	0x00010000	/* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160	0x00020000	/* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3	0x00040000	/* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL	0x00080000	/* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL	0x00800000	/* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL	0x08000000	/* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR	0x10000000	/* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ		0x00004007	/* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ		0x00000007	/* Used to access 5GHz radios (default) */
 
 /*
  * PHY frame control register [5110] /turbo mode register [5111+]
@@ -1630,18 +1871,21 @@
  * a "turbo mode register" for 5110. We treat this one as
  * a frame control register for 5110 below.
  */
-#define	AR5K_PHY_TURBO			0x9804
-#define	AR5K_PHY_TURBO_MODE		0x00000001
-#define	AR5K_PHY_TURBO_SHORT		0x00000002
+#define	AR5K_PHY_TURBO			0x9804			/* Register Address */
+#define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
 
 /*
  * PHY agility command register
+ * (aka TST_1)
  */
-#define	AR5K_PHY_AGC			0x9808
-#define	AR5K_PHY_AGC_DISABLE		0x08000000
+#define	AR5K_PHY_AGC			0x9808			/* Register Address */
+#define	AR5K_PHY_TST1			0x9808
+#define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
+#define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
 
 /*
- * PHY timing register [5112+]
+ * PHY timing register 3 [5112+]
  */
 #define	AR5K_PHY_TIMING_3		0x9814
 #define	AR5K_PHY_TIMING_3_DSC_MAN	0xfffe0000
@@ -1657,26 +1901,81 @@
 /*
  * PHY activation register
  */
-#define	AR5K_PHY_ACT			0x981c
-#define	AR5K_PHY_ACT_ENABLE		0x00000001
-#define	AR5K_PHY_ACT_DISABLE		0x00000002
+#define	AR5K_PHY_ACT			0x981c			/* Register Address */
+#define	AR5K_PHY_ACT_ENABLE		0x00000001	/* Activate PHY */
+#define	AR5K_PHY_ACT_DISABLE		0x00000002	/* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ * (i think these are delay times,
+ * these calibration values exist
+ * in EEPROM)
+ */
+#define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+
+#define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+
+#define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON	0x00000100	/* TX frame to XPA B on (field) */
+#define	AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF	0x00010000	/* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF	0x01000000	/* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define	AR5K_PHY_PA_CTL			0x9838			/* Register Address */
+#define	AR5K_PHY_PA_CTL_XPA_A_HI	0x00000001	/* XPA A high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_B_HI	0x00000002	/* XPA B high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_A_EN	0x00000004	/* Enable XPA A */
+#define	AR5K_PHY_PA_CTL_XPA_B_EN	0x00000008	/* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING		0x9844			/* Register Address */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN			0x9848			/* Register Address */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+
+#define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
+#define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
+
+/*
+ * Desired size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
 
 /*
  * PHY signal register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_SIG			0x9858
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000
+#define	AR5K_PHY_SIG			0x9858			/* Register Address */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18
 
 /*
  * PHY coarse agility control register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_AGCCOARSE		0x985c
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80
+#define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15
 
 /*
@@ -1689,12 +1988,13 @@
 /*
  * PHY noise floor status register
  */
-#define AR5K_PHY_NF			0x9864
-#define AR5K_PHY_NF_M			0x000001ff
-#define AR5K_PHY_NF_ACTIVE		0x00000100
+#define AR5K_PHY_NF			0x9864			/* Register address */
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
+#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
 
 /*
  * PHY ADC saturation register [5110]
@@ -1706,6 +2006,30 @@
 #define	AR5K_PHY_ADCSAT_THR_S		5
 
 /*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR		0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT	0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S	0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1		0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S	17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2		0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S	24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 		0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN	0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT	0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S	8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1		0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S		14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2		0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S		21
+
+
+/*
  * PHY sleep registers [5112+]
  */
 #define AR5K_PHY_SCR			0x9870
@@ -1730,6 +2054,8 @@
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
+#define	AR5K_PHY_PLL_HALF_RATE		0x00000100
+#define	AR5K_PHY_PLL_QUARTER_RATE	0x00000200
 
 /*
  * RF Buffer register
@@ -1792,23 +2118,74 @@
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021
 
 /*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL		0x9910			/* Register Address */
+#define	AR5K_PHY_ANT_CTL_TXRX_EN	0x00000001	/* Enable TX/RX (?) */
+#define	AR5K_PHY_ANT_CTL_SECTORED_ANT	0x00000004	/* Sectored Antenna */
+#define	AR5K_PHY_ANT_CTL_HITUNE5	0x00000008	/* Hitune5 (?) */
+#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE	0x00000010	/* Switch table idle (?) */
+
+/*
  * PHY receiver delay register [5111+]
  */
-#define	AR5K_PHY_RX_DELAY		0x9914
-#define	AR5K_PHY_RX_DELAY_M		0x00003fff
+#define	AR5K_PHY_RX_DELAY		0x9914			/* Register Address */
+#define	AR5K_PHY_RX_DELAY_M		0x00003fff	/* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define	AR5K_PHY_MAX_RX_LEN		0x991c
 
 /*
- * PHY timing I(nphase) Q(adrature) control register [5111+]
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
  */
-#define	AR5K_PHY_IQ			0x9920		/* Register address */
+#define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
-#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000
+#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000	/* Mask for max number of samples in log scale */
 #define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S	12
 #define	AR5K_PHY_IQ_RUN			0x00010000	/* Run i/q calibration */
+#define	AR5K_PHY_IQ_USE_PT_DF		0x00020000	/* Use pilot track df (?) */
+#define	AR5K_PHY_IQ_EARLY_TRIG_THR	0x00200000	/* Early trigger threshold (?) (field) */
+#define	AR5K_PHY_IQ_PILOT_MASK_EN	0x10000000	/* Enable pilot mask (?) */
+#define	AR5K_PHY_IQ_CHAN_MASK_EN	0x20000000	/* Enable channel mask (?) */
+#define	AR5K_PHY_IQ_SPUR_FILT_EN	0x40000000	/* Enable spur filter */
+#define	AR5K_PHY_IQ_SPUR_RSSI_EN	0x80000000	/* Enable spur rssi */
 
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI	0x00800000	/* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define	AR5K_PHY_WARM_RESET		0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL			0x992c			/* Register Address */
+#define	AR5K_PHY_CTL_RX_DRAIN_RATE	0x00000001	/* RX drain rate (?) */
+#define	AR5K_PHY_CTL_LATE_TX_SIG_SYM	0x00000002	/* Late tx signal symbol (?) */
+#define	AR5K_PHY_CTL_GEN_SCRAMBLER	0x00000004	/* Generate scrambler */
+#define	AR5K_PHY_CTL_TX_ANT_SEL		0x00000008	/* TX antenna select */
+#define	AR5K_PHY_CTL_TX_ANT_STATIC	0x00000010	/* Static TX antenna */
+#define	AR5K_PHY_CTL_RX_ANT_SEL		0x00000020	/* RX antenna select */
+#define	AR5K_PHY_CTL_RX_ANT_STATIC	0x00000040	/* Static RX antenna */
+#define	AR5K_PHY_CTL_LOW_FREQ_SLE_EN	0x00000080	/* Enable low freq sleep */
 
 /*
  * PHY PAPD probe register [5111+ (?)]
@@ -1816,9 +2193,13 @@
  * Because it's always 0 in 5211 initialization code
  */
 #define	AR5K_PHY_PAPD_PROBE		0x9930
+#define	AR5K_PHY_PAPD_PROBE_SH_HI_PAR	0x00000001
+#define	AR5K_PHY_PAPD_PROBE_PCDAC_BIAS	0x00000002
+#define	AR5K_PHY_PAPD_PROBE_COMP_GAIN	0x00000040
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER	0x00007e00
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER_S	9
 #define	AR5K_PHY_PAPD_PROBE_TX_NEXT	0x00008000
+#define	AR5K_PHY_PAPD_PROBE_PREDIST_EN	0x00010000
 #define	AR5K_PHY_PAPD_PROBE_TYPE	0x01800000	/* [5112+] */
 #define	AR5K_PHY_PAPD_PROBE_TYPE_S	23
 #define	AR5K_PHY_PAPD_PROBE_TYPE_OFDM	0
@@ -1848,15 +2229,16 @@
 #define	AR5K_PHY_FRAME_CTL		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
 /*---[5111+]---*/
-#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038
+#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
+#define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
 /*---[5110/5111]---*/
-#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000
-#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000
-#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* illegal rate */
-#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* illegal length */
+#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
+#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
+#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* Illegal rate */
+#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* Illegal length */
 #define	AR5K_PHY_FRAME_CTL_SERVICE_ERR	0x20000000
-#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* tx underrun */
+#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* TX underrun */
 #define AR5K_PHY_FRAME_CTL_INI		AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
 			AR5K_PHY_FRAME_CTL_TXURN_ERR | \
 			AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
@@ -1915,6 +2297,11 @@ after DFS is enabled */
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
 
 /*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES		0x9968
+
+/*
  * PHY clock sleep registers [5112+]
  */
 #define AR5K_PHY_SCLOCK			0x99f0
@@ -1922,56 +2309,116 @@ after DFS is enabled */
 #define AR5K_PHY_SDELAY			0x99f4
 #define AR5K_PHY_SDELAY_32MHZ		0x000000ff
 #define AR5K_PHY_SPENDING		0x99f8
+#define	AR5K_PHY_SPENDING_14		0x00000014
+#define	AR5K_PHY_SPENDING_18		0x00000018
 #define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014 /* <- i 've only seen this on 2425 dumps ! */
-#define AR5K_PHY_SPENDING_RF5112A	0x0000000e /* but since i only have 5112A-based chips */
-#define AR5K_PHY_SPENDING_RF5424	0x00000012 /* to test it might be also for old 5112.  */
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define	AR5K_PHY_SPENDING_RF5413	0x00000014
+#define	AR5K_PHY_SPENDING_RF2413	0x00000014
+#define AR5K_PHY_SPENDING_RF2425	0x00000018
 
 /*
  * Misc PHY/radio registers [5110 - 5111]
  */
-#define	AR5K_BB_GAIN_BASE		0x9b00 /* BaseBand Amplifier Gain table base address */
+#define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
-#define	AR5K_RF_GAIN_BASE		0x9a00 /* RF Amplrifier Gain table base address */
+#define	AR5K_RF_GAIN_BASE		0x9a00	/* RF Amplrifier Gain table base address */
 #define AR5K_RF_GAIN(_n)		(AR5K_RF_GAIN_BASE + ((_n) << 2))
 
 /*
  * PHY timing IQ calibration result register [5111+]
  */
-#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10 /* I (Inphase) power value */
-#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14 /* Q (Quadrature) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10	/* I (Inphase) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14	/* Q (Quadrature) power value */
 #define	AR5K_PHY_IQRES_CAL_CORR		0x9c18	/* I/Q Correlation */
 
 /*
  * PHY current RSSI register [5111+]
  */
-#define	AR5K_PHY_CURRENT_RSSI		0x9c1c
+#define	AR5K_PHY_CURRENT_RSSI	0x9c1c
+
+/*
+ * PHY RF Bus grant register (?)
+ */
+#define	AR5K_PHY_RFBUS_GRANT	0x9c20
+
+/*
+ * PHY ADC test register
+ */
+#define	AR5K_PHY_ADC_TEST	0x9c24
+#define	AR5K_PHY_ADC_TEST_I	0x00000001
+#define	AR5K_PHY_ADC_TEST_Q	0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define	AR5K_PHY_DAC_TEST	0x9c28
+#define	AR5K_PHY_DAC_TEST_I	0x00000001
+#define	AR5K_PHY_DAC_TEST_Q	0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define	AR5K_PHY_PTAT		0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define	AR5K_PHY_BAD_TX_RATE	0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define	AR5K_PHY_SPUR_PWR	0x9c34			/* Register Address */
+#define	AR5K_PHY_SPUR_PWR_I	0x00000001	/* SPUR Power estimate for I (field) */
+#define	AR5K_PHY_SPUR_PWR_Q	0x00000100	/* SPUR Power estimate for Q (field) */
+#define	AR5K_PHY_SPUR_PWR_FILT	0x00010000	/* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define	AR5K_PHY_CHAN_STATUS		0x9c38
+#define	AR5K_PHY_CHAN_STATUS_BT_ACT	0x00000001
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_RAW	0x00000002
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_MAC	0x00000004
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define	AR5K_PHY_PAPD_I_BASE	0xa000
+#define	AR5K_PHY_PAPD_I(_n)	(AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
 
 /*
  * PHY PCDAC TX power table
  */
 #define	AR5K_PHY_PCDAC_TXPOWER_BASE_5211	0xa180
-#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413	0xa280
-#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF5413 ? \
-					AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\
+#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413	0xa280
+#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF2413 ? \
+					AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\
 					AR5K_PHY_PCDAC_TXPOWER_BASE_5211)
 #define	AR5K_PHY_PCDAC_TXPOWER(_n)	(AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
 
 /*
  * PHY mode register [5111+]
  */
-#define	AR5K_PHY_MODE			0x0a200		/* Register address */
-#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation mask*/
+#define	AR5K_PHY_MODE			0x0a200			/* Register Address */
+#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation bit */
 #define AR5K_PHY_MODE_MOD_OFDM		0
 #define AR5K_PHY_MODE_MOD_CCK		1
-#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode mask */
+#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode bit */
 #define	AR5K_PHY_MODE_FREQ_5GHZ		0
 #define	AR5K_PHY_MODE_FREQ_2GHZ		2
-#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Dynamic OFDM/CCK mode mask [5112+] */
+#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Enable Dynamic OFDM/CCK mode [5112+] */
 #define AR5K_PHY_MODE_RAD		0x00000008	/* [5212+] */
 #define AR5K_PHY_MODE_RAD_RF5111	0
 #define AR5K_PHY_MODE_RAD_RF5112	8
-#define AR5K_PHY_MODE_XR		0x00000010	/* [5112+] */
+#define AR5K_PHY_MODE_XR		0x00000010	/* Enable XR mode [5112+] */
+#define	AR5K_PHY_MODE_HALF_RATE		0x00000020	/* Enable Half rate (test) */
+#define	AR5K_PHY_MODE_QUARTER_RATE	0x00000040	/* Enable Quarter rat (test) */
 
 /*
  * PHY CCK transmit control register [5111+ (?)]
@@ -1979,6 +2426,15 @@ after DFS is enabled */
 #define AR5K_PHY_CCKTXCTL		0xa204
 #define AR5K_PHY_CCKTXCTL_WORLD		0x00000000
 #define AR5K_PHY_CCKTXCTL_JAPAN		0x00000010
+#define	AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS	0x00000001
+#define	AR5K_PHY_CCKTXCTK_DAC_SCALE	0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR			0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
 /*
  * PHY 2GHz gain register [5111+]