Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits)
  via-velocity: Fix velocity driver unmapping incorrect size.
  mlx4_en: Remove redundant refill code on RX
  mlx4_en: Removed redundant check on lso header size
  mlx4_en: Cancel port_up check in transmit function
  mlx4_en: using stop/start_all_queues
  mlx4_en: Removed redundant skb->len check
  mlx4_en: Counting all the dropped packets on the TX side
  usbnet cdc_subset: fix issues talking to PXA gadgets
  Net: qla3xxx, remove sleeping in atomic
  ipv4: fix NULL pointer + success return in route lookup path
  isdn: clean up documentation index
  cfg80211: validate station settings
  cfg80211: allow setting station parameters in mesh
  cfg80211: allow adding/deleting stations on mesh
  ath5k: fix beacon_int handling
  MAINTAINERS: Fix Atheros pattern paths
  ath9k: restore PS mode, before we put the chip into FULL SLEEP state.
  ath9k: wait for beacon frame along with CAB
  acer-wmi: fix rfkill conversion
  ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling
  ...

4 files changed, 32 insertions, 6 deletions

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 55f7de09d134..ea045151f953 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -538,6 +538,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	sc->iobase = mem; /* So we can unmap it on detach */
 	sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
 	sc->opmode = NL80211_IFTYPE_STATION;
+	sc->bintval = 1000;
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
@@ -686,6 +687,13 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	if (err)
 		return err;
 
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_write_config_byte(pdev, 0x41, 0);
+
 	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (err) {
 		ATH5K_ERR(sc, "request_irq failed\n");
@@ -2748,9 +2756,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		goto end;
 	}
 
-	/* Set to a reasonable value. Note that this will
-	 * be set to mac80211's value at ath5k_config(). */
-	sc->bintval = 1000;
 	ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
 
 	ret = 0;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9f49a3251d4d..66a6c1f5022a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1196,8 +1196,8 @@ void ath_radio_disable(struct ath_softc *sc)
 
 	ath9k_hw_phy_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1);
-	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 	ath9k_ps_restore(sc);
+	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 }
 
 /*******************/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ccdf20a2e9be..170c5b32e49b 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
 	u8 csz;
+	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
 
@@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_master(pdev);
 
+	/*
+	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
 	ret = pci_request_region(pdev, 0, "ath9k");
 	if (ret) {
 		dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@ static int ath_pci_resume(struct pci_dev *pdev)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	u32 val;
 	int err;
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 	pci_restore_state(pdev);
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
 	/* Enable LED */
 	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index f99f3a76df3f..cece1c4c6bda 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -539,11 +539,14 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 	if (ath_beacon_dtim_pending_cab(skb)) {
 		/*
 		 * Remain awake waiting for buffered broadcast/multicast
-		 * frames.
+		 * frames. If the last broadcast/multicast frame is not
+		 * received properly, the next beacon frame will work as
+		 * a backup trigger for returning into NETWORK SLEEP state,
+		 * so we are waiting for it as well.
 		 */
 		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
 			"buffered broadcast/multicast frame(s)\n");
-		sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+		sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
 		return;
 	}