Digi del-5.6 Complete2.6.31-digi-201102151558

8 files changed, 197 insertions, 87 deletions

diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 007eb85fc67e..1084ca69835f 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -64,6 +64,8 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x0cf3, 0x9170) },
 	/* Atheros TG121N */
 	{ USB_DEVICE(0x0cf3, 0x1001) },
+	/* TP-Link TL-WN821N v2 */
+	{ USB_DEVICE(0x0cf3, 0x1002) },
 	/* Cace Airpcap NX */
 	{ USB_DEVICE(0xcace, 0x0300) },
 	/* D-Link DWA 160A */
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6358233bac99..778baf7de231 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1164,6 +1164,7 @@ extern void ath5k_unregister_leds(struct ath5k_softc *sc);
 
 /* Reset Functions */
 extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_on_hold(struct ath5k_hw *ah);
 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
 /* Power management functions */
 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index c41ef58393e7..605b8f67dbe0 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -145,7 +145,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 		goto err_free;
 
 	/* Bring device out of sleep and reset it's units */
-	ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+	ret = ath5k_hw_nic_wakeup(ah, 0, true);
 	if (ret)
 		goto err_free;
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 029c1bc7468f..753f50e8d84f 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -666,7 +666,6 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	ath5k_led_off(sc);
 
-	free_irq(pdev->irq, sc);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -694,18 +693,8 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);
 
-	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
-	if (err) {
-		ATH5K_ERR(sc, "request_irq failed\n");
-		goto err_no_irq;
-	}
-
 	ath5k_led_enable(sc);
 	return 0;
-
-err_no_irq:
-	pci_disable_device(pdev);
-	return err;
 }
 #endif /* CONFIG_PM */
 
@@ -2445,27 +2434,29 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 	ret = ath5k_stop_locked(sc);
 	if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
 		/*
-		 * Set the chip in full sleep mode.  Note that we are
-		 * careful to do this only when bringing the interface
-		 * completely to a stop.  When the chip is in this state
-		 * it must be carefully woken up or references to
-		 * registers in the PCI clock domain may freeze the bus
-		 * (and system).  This varies by chip and is mostly an
-		 * issue with newer parts that go to sleep more quickly.
-		 */
-		if (sc->ah->ah_mac_srev >= 0x78) {
-			/*
-			 * XXX
-			 * don't put newer MAC revisions > 7.8 to sleep because
-			 * of the above mentioned problems
-			 */
-			ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
-				"not putting device to sleep\n");
-		} else {
-			ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
-				"putting device to full sleep\n");
-			ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
-		}
+		 * Don't set the card in full sleep mode!
+		 *
+		 * a) When the device is in this state it must be carefully
+		 * woken up or references to registers in the PCI clock
+		 * domain may freeze the bus (and system).  This varies
+		 * by chip and is mostly an issue with newer parts
+		 * (madwifi sources mentioned srev >= 0x78) that go to
+		 * sleep more quickly.
+		 *
+		 * b) On older chips full sleep results a weird behaviour
+		 * during wakeup. I tested various cards with srev < 0x78
+		 * and they don't wake up after module reload, a second
+		 * module reload is needed to bring the card up again.
+		 *
+		 * Until we figure out what's going on don't enable
+		 * full chip reset on any chip (this is what Legacy HAL
+		 * and Sam's HAL do anyway). Instead Perform a full reset
+		 * on the device (same as initial state after attach) and
+		 * leave it idle (keep MAC/BB on warm reset) */
+		ret = ath5k_hw_on_hold(sc->ah);
+
+		ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+				"putting device to sleep\n");
 	}
 	ath5k_txbuf_free(sc, sc->bbuf);
 
@@ -2676,7 +2667,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 		sc->curchan = chan;
 		sc->curband = &sc->sbands[chan->band];
 	}
-	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
+	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
 	if (ret) {
 		ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
 		goto err;
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index c56b494d417a..5eded5a0d452 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -97,6 +97,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	int ret;
 	u16 val;
+	u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
 
 	/*
 	 * Read values from EEPROM and store them in the capability structure
@@ -111,20 +112,44 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
 		return 0;
 
-#ifdef notyet
 	/*
 	 * Validate the checksum of the EEPROM date. There are some
 	 * devices with invalid EEPROMs.
 	 */
-	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+	AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+	if (val) {
+		eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+			   AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+		AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+		eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+		/*
+		 * Fail safe check to prevent stupid loops due
+		 * to busted EEPROMs. XXX: This value is likely too
+		 * big still, waiting on a better value.
+		 */
+		if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+			ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+				  "%d (0x%04x) max expected: %d (0x%04x)\n",
+				  eep_max, eep_max,
+				  3 * AR5K_EEPROM_INFO_MAX,
+				  3 * AR5K_EEPROM_INFO_MAX);
+			return -EIO;
+		}
+	}
+
+	for (cksum = 0, offset = 0; offset < eep_max; offset++) {
 		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
 		cksum ^= val;
 	}
 	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+			  "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+			  cksum, eep_max,
+			  eep_max == AR5K_EEPROM_INFO_MAX ?
+				"default size" : "custom size");
 		return -EIO;
 	}
-#endif
 
 	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
 	    ee_ant_gain);
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 64be73a5edae..020bc4c75ef0 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -34,6 +34,14 @@
 #define AR5K_EEPROM_RFKILL_POLARITY_S	1
 
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER		0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER		0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK	0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT	4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT	12
+
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
 #define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index a876ca8d69ef..5c0e31b197a0 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -740,13 +740,22 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 						AR5K_RF_XPD_GAIN, true);
 
 		} else {
-			/* TODO: Set high and low gain bits */
-			ath5k_hw_rfb_op(ah, rf_regs,
-						ee->ee_x_gain[ee_mode],
+			u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+			if (ee->ee_pd_gains[ee_mode] > 1) {
+				ath5k_hw_rfb_op(ah, rf_regs,
+						pdg_curve_to_idx[0],
 						AR5K_RF_PD_GAIN_LO, true);
-			ath5k_hw_rfb_op(ah, rf_regs,
-						ee->ee_x_gain[ee_mode],
+				ath5k_hw_rfb_op(ah, rf_regs,
+						pdg_curve_to_idx[1],
 						AR5K_RF_PD_GAIN_HI, true);
+			} else {
+				ath5k_hw_rfb_op(ah, rf_regs,
+						pdg_curve_to_idx[0],
+						AR5K_RF_PD_GAIN_LO, true);
+				ath5k_hw_rfb_op(ah, rf_regs,
+						pdg_curve_to_idx[0],
+						AR5K_RF_PD_GAIN_HI, true);
+			}
 
 			/* Lower synth voltage on Rev 2 */
 			ath5k_hw_rfb_op(ah, rf_regs, 2,
@@ -1897,8 +1906,9 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
 	s16 min_pwrL, min_pwrR;
 	s16 pwr_i;
 
-	if (WARN_ON(stepL[0] == stepL[1] || stepR[0] == stepR[1]))
-		return 0;
+	/* Some vendors write the same pcdac value twice !!! */
+	if (stepL[0] == stepL[1] || stepR[0] == stepR[1])
+		return max(pwrL[0], pwrR[0]);
 
 	if (pwrL[0] == pwrL[1])
 		min_pwrL = pwrL[0];
@@ -2921,8 +2931,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
 		return -EINVAL;
 	}
-	if (txpower == 0)
-		txpower = AR5K_TUNE_DEFAULT_TXPOWER;
 
 	/* Reset TX power values */
 	memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index bd0a97a38d34..4980621b0239 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -258,29 +258,35 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 		if (!set_chip)
 			goto commit;
 
-		/* Preserve sleep duration */
 		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+
+		/* If card is down we 'll get 0xffff... so we
+		 * need to clean this up before we write the register
+		 */
 		if (data & 0xffc00000)
 			data = 0;
 		else
-			data = data & 0xfffcffff;
+			/* Preserve sleep duration etc */
+			data = data & ~AR5K_SLEEP_CTL_SLE;
 
-		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+							AR5K_SLEEP_CTL);
 		udelay(15);
 
-		for (i = 50; i > 0; i--) {
+		for (i = 200; i > 0; i--) {
 			/* Check if the chip did wake up */
 			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
 					AR5K_PCICFG_SPWR_DN) == 0)
 				break;
 
 			/* Wait a bit and retry */
-			udelay(200);
-			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+			udelay(50);
+			ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+							AR5K_SLEEP_CTL);
 		}
 
 		/* Fail if the chip didn't wake up */
-		if (i <= 0)
+		if (i == 0)
 			return -EIO;
 
 		break;
@@ -297,6 +303,64 @@ commit:
 }
 
 /*
+ * Put device on hold
+ *
+ * Put MAC and Baseband on warm reset and
+ * keep that state (don't clean sleep control
+ * register). After this MAC and Baseband are
+ * disabled and a full reset is needed to come
+ * back. This way we save as much power as possible
+ * without puting the card on full sleep.
+ */
+int ath5k_hw_on_hold(struct ath5k_hw *ah)
+{
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 bus_flags;
+	int ret;
+
+	/* Make sure device is awake */
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+		return ret;
+	}
+
+	/*
+	 * Put chipset on warm reset...
+	 *
+	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * results card to hang and always return 0xffff... so
+	 * we ingore that flag for PCI-E cards. On PCI cards
+	 * this flag gets cleared after 64 PCI clocks.
+	 */
+	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+			mdelay(2);
+	} else {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_BASEBAND | bus_flags);
+	}
+
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n");
+		return -EIO;
+	}
+
+	/* ...wakeup again!*/
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+/*
  * Bring up MAC + PHY Chips and program PLL
  * TODO: Half/Quarter rate support
  */
@@ -319,6 +383,50 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 		return ret;
 	}
 
+	/*
+	 * Put chipset on warm reset...
+	 *
+	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * results card to hang and always return 0xffff... so
+	 * we ingore that flag for PCI-E cards. On PCI cards
+	 * this flag gets cleared after 64 PCI clocks.
+	 */
+	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+			mdelay(2);
+	} else {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_BASEBAND | bus_flags);
+	}
+
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	/* ...wakeup again!...*/
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+		return ret;
+	}
+
+	/* ...clear reset control register and pull device out of
+	 * warm reset */
+	if (ath5k_hw_nic_reset(ah, 0)) {
+		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	/* On initialization skip PLL programming since we don't have
+	 * a channel / mode set yet */
+	if (initial)
+		return 0;
+
 	if (ah->ah_version != AR5K_AR5210) {
 		/*
 		 * Get channel mode flags
@@ -384,39 +492,6 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 					AR5K_PHY_TURBO);
 	}
 
-	/* reseting PCI on PCI-E cards results card to hang
-	 * and always return 0xffff... so we ingore that flag
-	 * for PCI-E cards */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
-	/* Reset chipset */
-	if (ah->ah_version == AR5K_AR5210) {
-		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
-			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
-			mdelay(2);
-	} else {
-		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-			AR5K_RESET_CTL_BASEBAND | bus_flags);
-	}
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	/* ...wakeup again!*/
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
-		return ret;
-	}
-
-	/* ...final warm reset */
-	if (ath5k_hw_nic_reset(ah, 0)) {
-		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
-		return -EIO;
-	}
-
 	if (ah->ah_version != AR5K_AR5210) {
 
 		/* ...update PLL if needed */