diff options
author | Dan Willemsen <dwillemsen@nvidia.com> | 2011-11-30 21:41:00 -0800 |
---|---|---|
committer | Dan Willemsen <dwillemsen@nvidia.com> | 2011-11-30 21:41:00 -0800 |
commit | a70c0eab1897b2bb15d89f43267828682950842e (patch) | |
tree | 3b53319c93e0a73db1d8df5947e6ed621ccbb5df /drivers/net/wireless/bcm4329/bcmpcispi.c | |
parent | 83adb17804d48ead8fc91a8ab7dda81db13b9444 (diff) | |
parent | 7f9ed524778bcdcd8a51bdeab2095655fb57c431 (diff) |
Merge branch 'korg-android-3.1' into korg-android+linux-tegra-3.1
Conflicts:
arch/arm/mm/cache-l2x0.c
drivers/misc/Kconfig
drivers/misc/Makefile
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Diffstat (limited to 'drivers/net/wireless/bcm4329/bcmpcispi.c')
-rw-r--r-- | drivers/net/wireless/bcm4329/bcmpcispi.c | 630 |
1 files changed, 630 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcm4329/bcmpcispi.c b/drivers/net/wireless/bcm4329/bcmpcispi.c new file mode 100644 index 000000000000..1a8b6717f924 --- /dev/null +++ b/drivers/net/wireless/bcm4329/bcmpcispi.c @@ -0,0 +1,630 @@ +/* + * Broadcom SPI over PCI-SPI Host Controller, low-level hardware driver + * + * Copyright (C) 1999-2010, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: bcmpcispi.c,v 1.22.2.4.4.5.6.1 2010/08/13 00:26:05 Exp $ + */ + +#include <typedefs.h> +#include <bcmutils.h> + +#include <sdio.h> /* SDIO Specs */ +#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */ +#include <sdiovar.h> /* to get msglevel bit values */ + +#include <pcicfg.h> +#include <bcmsdspi.h> +#include <bcmspi.h> +#include <bcmpcispi.h> /* BRCM PCI-SPI Host Controller Register definitions */ + + +/* ndis_osl.h needs to do a runtime check of the osh to map + * R_REG/W_REG to bus specific access similar to linux_osl.h. + * Until then... + */ +/* linux */ + +#define SPIPCI_RREG R_REG +#define SPIPCI_WREG W_REG + + +#define SPIPCI_ANDREG(osh, r, v) SPIPCI_WREG(osh, (r), (SPIPCI_RREG(osh, r) & (v))) +#define SPIPCI_ORREG(osh, r, v) SPIPCI_WREG(osh, (r), (SPIPCI_RREG(osh, r) | (v))) + + +int bcmpcispi_dump = 0; /* Set to dump complete trace of all SPI bus transactions */ + +typedef struct spih_info_ { + uint bar0; /* BAR0 of PCI Card */ + uint bar1; /* BAR1 of PCI Card */ + osl_t *osh; /* osh handle */ + spih_pciregs_t *pciregs; /* PCI Core Registers */ + spih_regs_t *regs; /* SPI Controller Registers */ + uint8 rev; /* PCI Card Revision ID */ +} spih_info_t; + + +/* Attach to PCI-SPI Host Controller Hardware */ +bool +spi_hw_attach(sdioh_info_t *sd) +{ + osl_t *osh; + spih_info_t *si; + + sd_trace(("%s: enter\n", __FUNCTION__)); + + osh = sd->osh; + + if ((si = (spih_info_t *)MALLOC(osh, sizeof(spih_info_t))) == NULL) { + sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh))); + return FALSE; + } + + bzero(si, sizeof(spih_info_t)); + + sd->controller = si; + + si->osh = sd->osh; + si->rev = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_REV, 4) & 0xFF; + + if (si->rev < 3) { + sd_err(("Host controller %d not supported, please upgrade to rev >= 3\n", si->rev)); + MFREE(osh, si, sizeof(spih_info_t)); + return (FALSE); + } + + sd_err(("Attaching to Generic PCI SPI Host Controller Rev %d\n", si->rev)); + + /* FPGA Revision < 3 not supported by driver anymore. */ + ASSERT(si->rev >= 3); + + si->bar0 = sd->bar0; + + /* Rev < 10 PciSpiHost has 2 BARs: + * BAR0 = PCI Core Registers + * BAR1 = PciSpiHost Registers (all other cores on backplane) + * + * Rev 10 and up use a different PCI core which only has a single + * BAR0 which contains the PciSpiHost Registers. + */ + if (si->rev < 10) { + si->pciregs = (spih_pciregs_t *)spi_reg_map(osh, + (uintptr)si->bar0, + sizeof(spih_pciregs_t)); + sd_err(("Mapped PCI Core regs to BAR0 at %p\n", si->pciregs)); + + si->bar1 = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_BAR1, 4); + si->regs = (spih_regs_t *)spi_reg_map(osh, + (uintptr)si->bar1, + sizeof(spih_regs_t)); + sd_err(("Mapped SPI Controller regs to BAR1 at %p\n", si->regs)); + } else { + si->regs = (spih_regs_t *)spi_reg_map(osh, + (uintptr)si->bar0, + sizeof(spih_regs_t)); + sd_err(("Mapped SPI Controller regs to BAR0 at %p\n", si->regs)); + si->pciregs = NULL; + } + /* Enable SPI Controller, 16.67MHz SPI Clock */ + SPIPCI_WREG(osh, &si->regs->spih_ctrl, 0x000000d1); + + /* Set extended feature register to defaults */ + SPIPCI_WREG(osh, &si->regs->spih_ext, 0x00000000); + + /* Set GPIO CS# High (de-asserted) */ + SPIPCI_WREG(osh, &si->regs->spih_gpio_data, SPIH_CS); + + /* set GPIO[0] to output for CS# */ + /* set GPIO[1] to output for power control */ + /* set GPIO[2] to input for card detect */ + SPIPCI_WREG(osh, &si->regs->spih_gpio_ctrl, (SPIH_CS | SPIH_SLOT_POWER)); + + /* Clear out the Read FIFO in case there is any stuff left in there from a previous run. */ + while ((SPIPCI_RREG(osh, &si->regs->spih_stat) & SPIH_RFEMPTY) == 0) { + SPIPCI_RREG(osh, &si->regs->spih_data); + } + + /* Wait for power to stabilize to the SDIO Card (100msec was insufficient) */ + OSL_DELAY(250000); + + /* Check card detect on FPGA Revision >= 4 */ + if (si->rev >= 4) { + if (SPIPCI_RREG(osh, &si->regs->spih_gpio_data) & SPIH_CARD_DETECT) { + sd_err(("%s: no card detected in SD slot\n", __FUNCTION__)); + spi_reg_unmap(osh, (uintptr)si->regs, sizeof(spih_regs_t)); + if (si->pciregs) { + spi_reg_unmap(osh, (uintptr)si->pciregs, sizeof(spih_pciregs_t)); + } + MFREE(osh, si, sizeof(spih_info_t)); + return FALSE; + } + } + + /* Interrupts are level sensitive */ + SPIPCI_WREG(osh, &si->regs->spih_int_edge, 0x80000000); + + /* Interrupts are active low. */ + SPIPCI_WREG(osh, &si->regs->spih_int_pol, 0x40000004); + + /* Enable interrupts through PCI Core. */ + if (si->pciregs) { + SPIPCI_WREG(osh, &si->pciregs->ICR, PCI_INT_PROP_EN); + } + + sd_trace(("%s: exit\n", __FUNCTION__)); + return TRUE; +} + +/* Detach and return PCI-SPI Hardware to unconfigured state */ +bool +spi_hw_detach(sdioh_info_t *sd) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + spih_pciregs_t *pciregs = si->pciregs; + + sd_trace(("%s: enter\n", __FUNCTION__)); + + SPIPCI_WREG(osh, ®s->spih_ctrl, 0x00000010); + SPIPCI_WREG(osh, ®s->spih_gpio_ctrl, 0x00000000); /* Disable GPIO for CS# */ + SPIPCI_WREG(osh, ®s->spih_int_mask, 0x00000000); /* Clear Intmask */ + SPIPCI_WREG(osh, ®s->spih_hex_disp, 0x0000DEAF); + SPIPCI_WREG(osh, ®s->spih_int_edge, 0x00000000); + SPIPCI_WREG(osh, ®s->spih_int_pol, 0x00000000); + SPIPCI_WREG(osh, ®s->spih_hex_disp, 0x0000DEAD); + + /* Disable interrupts through PCI Core. */ + if (si->pciregs) { + SPIPCI_WREG(osh, &pciregs->ICR, 0x00000000); + spi_reg_unmap(osh, (uintptr)pciregs, sizeof(spih_pciregs_t)); + } + spi_reg_unmap(osh, (uintptr)regs, sizeof(spih_regs_t)); + + MFREE(osh, si, sizeof(spih_info_t)); + + sd->controller = NULL; + + sd_trace(("%s: exit\n", __FUNCTION__)); + return TRUE; +} + +/* Switch between internal (PCI) and external clock oscillator */ +static bool +sdspi_switch_clock(sdioh_info_t *sd, bool ext_clk) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + + /* Switch to desired clock, and reset the PLL. */ + SPIPCI_WREG(osh, ®s->spih_pll_ctrl, ext_clk ? SPIH_EXT_CLK : 0); + + SPINWAIT(((SPIPCI_RREG(osh, ®s->spih_pll_status) & SPIH_PLL_LOCKED) + != SPIH_PLL_LOCKED), 1000); + if ((SPIPCI_RREG(osh, ®s->spih_pll_status) & SPIH_PLL_LOCKED) != SPIH_PLL_LOCKED) { + sd_err(("%s: timeout waiting for PLL to lock\n", __FUNCTION__)); + return (FALSE); + } + return (TRUE); + +} + +/* Configure PCI-SPI Host Controller's SPI Clock rate as a divisor into the + * base clock rate. The base clock is either the PCI Clock (33MHz) or the + * external clock oscillator at U17 on the PciSpiHost. + */ +bool +spi_start_clock(sdioh_info_t *sd, uint16 div) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + uint32 t, espr, disp; + uint32 disp_xtal_freq; + bool ext_clock = FALSE; + char disp_string[5]; + + if (div > 2048) { + sd_err(("%s: divisor %d too large; using max of 2048\n", __FUNCTION__, div)); + div = 2048; + } else if (div & (div - 1)) { /* Not a power of 2? */ + /* Round up to a power of 2 */ + while ((div + 1) & div) + div |= div >> 1; + div++; + } + + /* For FPGA Rev >= 5, the use of an external clock oscillator is supported. + * If the oscillator is populated, use it to provide the SPI base clock, + * otherwise, default to the PCI clock as the SPI base clock. + */ + if (si->rev >= 5) { + uint32 clk_tick; + /* Enable the External Clock Oscillator as PLL clock source. */ + if (!sdspi_switch_clock(sd, TRUE)) { + sd_err(("%s: error switching to external clock\n", __FUNCTION__)); + } + + /* Check to make sure the external clock is running. If not, then it + * is not populated on the card, so we will default to the PCI clock. + */ + clk_tick = SPIPCI_RREG(osh, ®s->spih_clk_count); + if (clk_tick == SPIPCI_RREG(osh, ®s->spih_clk_count)) { + + /* Switch back to the PCI clock as the clock source. */ + if (!sdspi_switch_clock(sd, FALSE)) { + sd_err(("%s: error switching to external clock\n", __FUNCTION__)); + } + } else { + ext_clock = TRUE; + } + } + + /* Hack to allow hot-swapping oscillators: + * 1. Force PCI clock as clock source, using sd_divisor of 0. + * 2. Swap oscillator + * 3. Set desired sd_divisor (will switch to external oscillator as clock source. + */ + if (div == 0) { + ext_clock = FALSE; + div = 2; + + /* Select PCI clock as the clock source. */ + if (!sdspi_switch_clock(sd, FALSE)) { + sd_err(("%s: error switching to external clock\n", __FUNCTION__)); + } + + sd_err(("%s: Ok to hot-swap oscillators.\n", __FUNCTION__)); + } + + /* If using the external oscillator, read the clock frequency from the controller + * The value read is in units of 10000Hz, and it's not a nice round number because + * it is calculated by the FPGA. So to make up for that, we round it off. + */ + if (ext_clock == TRUE) { + uint32 xtal_freq; + + OSL_DELAY(1000); + xtal_freq = SPIPCI_RREG(osh, ®s->spih_xtal_freq) * 10000; + + sd_info(("%s: Oscillator is %dHz\n", __FUNCTION__, xtal_freq)); + + + disp_xtal_freq = xtal_freq / 10000; + + /* Round it off to a nice number. */ + if ((disp_xtal_freq % 100) > 50) { + disp_xtal_freq += 100; + } + + disp_xtal_freq = (disp_xtal_freq / 100) * 100; + } else { + sd_err(("%s: no external oscillator installed, using PCI clock.\n", __FUNCTION__)); + disp_xtal_freq = 3333; + } + + /* Convert the SPI Clock frequency to BCD format. */ + sprintf(disp_string, "%04d", disp_xtal_freq / div); + + disp = (disp_string[0] - '0') << 12; + disp |= (disp_string[1] - '0') << 8; + disp |= (disp_string[2] - '0') << 4; + disp |= (disp_string[3] - '0'); + + /* Select the correct ESPR register value based on the divisor. */ + switch (div) { + case 1: espr = 0x0; break; + case 2: espr = 0x1; break; + case 4: espr = 0x2; break; + case 8: espr = 0x5; break; + case 16: espr = 0x3; break; + case 32: espr = 0x4; break; + case 64: espr = 0x6; break; + case 128: espr = 0x7; break; + case 256: espr = 0x8; break; + case 512: espr = 0x9; break; + case 1024: espr = 0xa; break; + case 2048: espr = 0xb; break; + default: espr = 0x0; ASSERT(0); break; + } + + t = SPIPCI_RREG(osh, ®s->spih_ctrl); + t &= ~3; + t |= espr & 3; + SPIPCI_WREG(osh, ®s->spih_ctrl, t); + + t = SPIPCI_RREG(osh, ®s->spih_ext); + t &= ~3; + t |= (espr >> 2) & 3; + SPIPCI_WREG(osh, ®s->spih_ext, t); + + SPIPCI_WREG(osh, ®s->spih_hex_disp, disp); + + /* For Rev 8, writing to the PLL_CTRL register resets + * the PLL, and it can re-acquire in 200uS. For + * Rev 7 and older, we use a software delay to allow + * the PLL to re-acquire, which takes more than 2mS. + */ + if (si->rev < 8) { + /* Wait for clock to settle. */ + OSL_DELAY(5000); + } + + sd_info(("%s: SPI_CTRL=0x%08x SPI_EXT=0x%08x\n", + __FUNCTION__, + SPIPCI_RREG(osh, ®s->spih_ctrl), + SPIPCI_RREG(osh, ®s->spih_ext))); + + return TRUE; +} + +/* Configure PCI-SPI Host Controller High-Speed Clocking mode setting */ +bool +spi_controller_highspeed_mode(sdioh_info_t *sd, bool hsmode) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + + if (si->rev >= 10) { + if (hsmode) { + SPIPCI_ORREG(osh, ®s->spih_ext, 0x10); + } else { + SPIPCI_ANDREG(osh, ®s->spih_ext, ~0x10); + } + } + + return TRUE; +} + +/* Disable device interrupt */ +void +spi_devintr_off(sdioh_info_t *sd) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + + sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints)); + if (sd->use_client_ints) { + sd->intmask &= ~SPIH_DEV_INTR; + SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask); /* Clear Intmask */ + } +} + +/* Enable device interrupt */ +void +spi_devintr_on(sdioh_info_t *sd) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + + ASSERT(sd->lockcount == 0); + sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints)); + if (sd->use_client_ints) { + if (SPIPCI_RREG(osh, ®s->spih_ctrl) & 0x02) { + /* Ack in case one was pending but is no longer... */ + SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_DEV_INTR); + } + sd->intmask |= SPIH_DEV_INTR; + /* Set device intr in Intmask */ + SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask); + } +} + +/* Check to see if an interrupt belongs to the PCI-SPI Host or a SPI Device */ +bool +spi_check_client_intr(sdioh_info_t *sd, int *is_dev_intr) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + bool ours = FALSE; + + uint32 raw_int, cur_int; + ASSERT(sd); + + if (is_dev_intr) + *is_dev_intr = FALSE; + raw_int = SPIPCI_RREG(osh, ®s->spih_int_status); + cur_int = raw_int & sd->intmask; + if (cur_int & SPIH_DEV_INTR) { + if (sd->client_intr_enabled && sd->use_client_ints) { + sd->intrcount++; + ASSERT(sd->intr_handler); + ASSERT(sd->intr_handler_arg); + (sd->intr_handler)(sd->intr_handler_arg); + if (is_dev_intr) + *is_dev_intr = TRUE; + } else { + sd_trace(("%s: Not ready for intr: enabled %d, handler 0x%p\n", + __FUNCTION__, sd->client_intr_enabled, sd->intr_handler)); + } + SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_DEV_INTR); + SPIPCI_RREG(osh, ®s->spih_int_status); + ours = TRUE; + } else if (cur_int & SPIH_CTLR_INTR) { + /* Interrupt is from SPI FIFO... just clear and ack it... */ + sd_trace(("%s: SPI CTLR interrupt: raw_int 0x%08x cur_int 0x%08x\n", + __FUNCTION__, raw_int, cur_int)); + + /* Clear the interrupt in the SPI_STAT register */ + SPIPCI_WREG(osh, ®s->spih_stat, 0x00000080); + + /* Ack the interrupt in the interrupt controller */ + SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_CTLR_INTR); + SPIPCI_RREG(osh, ®s->spih_int_status); + + ours = TRUE; + } else if (cur_int & SPIH_WFIFO_INTR) { + sd_trace(("%s: SPI WR FIFO Empty interrupt: raw_int 0x%08x cur_int 0x%08x\n", + __FUNCTION__, raw_int, cur_int)); + + /* Disable the FIFO Empty Interrupt */ + sd->intmask &= ~SPIH_WFIFO_INTR; + SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask); + + sd->local_intrcount++; + sd->got_hcint = TRUE; + ours = TRUE; + } else { + /* Not an error: can share interrupts... */ + sd_trace(("%s: Not my interrupt: raw_int 0x%08x cur_int 0x%08x\n", + __FUNCTION__, raw_int, cur_int)); + ours = FALSE; + } + + return ours; +} + +static void +hexdump(char *pfx, unsigned char *msg, int msglen) +{ + int i, col; + char buf[80]; + + ASSERT(strlen(pfx) + 49 <= sizeof(buf)); + + col = 0; + + for (i = 0; i < msglen; i++, col++) { + if (col % 16 == 0) + strcpy(buf, pfx); + sprintf(buf + strlen(buf), "%02x", msg[i]); + if ((col + 1) % 16 == 0) + printf("%s\n", buf); + else + sprintf(buf + strlen(buf), " "); + } + + if (col % 16 != 0) + printf("%s\n", buf); +} + +/* Send/Receive an SPI Packet */ +void +spi_sendrecv(sdioh_info_t *sd, uint8 *msg_out, uint8 *msg_in, int msglen) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + uint32 count; + uint32 spi_data_out; + uint32 spi_data_in; + bool yield; + + sd_trace(("%s: enter\n", __FUNCTION__)); + + if (bcmpcispi_dump) { + printf("SENDRECV(len=%d)\n", msglen); + hexdump(" OUT: ", msg_out, msglen); + } + +#ifdef BCMSDYIELD + /* Only yield the CPU and wait for interrupt on Rev 8 and newer FPGA images. */ + yield = ((msglen > 500) && (si->rev >= 8)); +#else + yield = FALSE; +#endif /* BCMSDYIELD */ + + ASSERT(msglen % 4 == 0); + + + SPIPCI_ANDREG(osh, ®s->spih_gpio_data, ~SPIH_CS); /* Set GPIO CS# Low (asserted) */ + + for (count = 0; count < (uint32)msglen/4; count++) { + spi_data_out = ((uint32)((uint32 *)msg_out)[count]); + SPIPCI_WREG(osh, ®s->spih_data, spi_data_out); + } + +#ifdef BCMSDYIELD + if (yield) { + /* Ack the interrupt in the interrupt controller */ + SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_WFIFO_INTR); + SPIPCI_RREG(osh, ®s->spih_int_status); + + /* Enable the FIFO Empty Interrupt */ + sd->intmask |= SPIH_WFIFO_INTR; + sd->got_hcint = FALSE; + SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask); + + } +#endif /* BCMSDYIELD */ + + /* Wait for write fifo to empty... */ + SPIPCI_ANDREG(osh, ®s->spih_gpio_data, ~0x00000020); /* Set GPIO 5 Low */ + + if (yield) { + ASSERT((SPIPCI_RREG(sd->osh, ®s->spih_stat) & SPIH_WFEMPTY) == 0); + } + + spi_waitbits(sd, yield); + SPIPCI_ORREG(osh, ®s->spih_gpio_data, 0x00000020); /* Set GPIO 5 High (de-asserted) */ + + for (count = 0; count < (uint32)msglen/4; count++) { + spi_data_in = SPIPCI_RREG(osh, ®s->spih_data); + ((uint32 *)msg_in)[count] = spi_data_in; + } + + /* Set GPIO CS# High (de-asserted) */ + SPIPCI_ORREG(osh, ®s->spih_gpio_data, SPIH_CS); + + if (bcmpcispi_dump) { + hexdump(" IN : ", msg_in, msglen); + } +} + +void +spi_spinbits(sdioh_info_t *sd) +{ + spih_info_t *si = (spih_info_t *)sd->controller; + osl_t *osh = si->osh; + spih_regs_t *regs = si->regs; + uint spin_count; /* Spin loop bound check */ + + spin_count = 0; + while ((SPIPCI_RREG(sd->osh, ®s->spih_stat) & SPIH_WFEMPTY) == 0) { + if (spin_count > SPI_SPIN_BOUND) { + sd_err(("%s: SPIH_WFEMPTY spin bits out of bound %u times \n", + __FUNCTION__, spin_count)); + ASSERT(FALSE); + } + spin_count++; + } + + /* Wait for SPI Transfer state machine to return to IDLE state. + * The state bits are only implemented in Rev >= 5 FPGA. These + * bits are hardwired to 00 for Rev < 5, so this check doesn't cause + * any problems. + */ + spin_count = 0; + while ((SPIPCI_RREG(osh, ®s->spih_stat) & SPIH_STATE_MASK) != 0) { + if (spin_count > SPI_SPIN_BOUND) { + sd_err(("%s: SPIH_STATE_MASK spin bits out of bound %u times \n", + __FUNCTION__, spin_count)); + ASSERT(FALSE); + } + spin_count++; + } +} |