diff options
author | Dan Willemsen <dwillemsen@nvidia.com> | 2011-11-30 21:41:00 -0800 |
---|---|---|
committer | Dan Willemsen <dwillemsen@nvidia.com> | 2011-11-30 21:41:00 -0800 |
commit | a70c0eab1897b2bb15d89f43267828682950842e (patch) | |
tree | 3b53319c93e0a73db1d8df5947e6ed621ccbb5df /drivers/net/wireless/bcm4329/sbutils.c | |
parent | 83adb17804d48ead8fc91a8ab7dda81db13b9444 (diff) | |
parent | 7f9ed524778bcdcd8a51bdeab2095655fb57c431 (diff) |
Merge branch 'korg-android-3.1' into korg-android+linux-tegra-3.1
Conflicts:
arch/arm/mm/cache-l2x0.c
drivers/misc/Kconfig
drivers/misc/Makefile
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Diffstat (limited to 'drivers/net/wireless/bcm4329/sbutils.c')
-rw-r--r-- | drivers/net/wireless/bcm4329/sbutils.c | 1004 |
1 files changed, 1004 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcm4329/sbutils.c b/drivers/net/wireless/bcm4329/sbutils.c new file mode 100644 index 000000000000..46cd51010b78 --- /dev/null +++ b/drivers/net/wireless/bcm4329/sbutils.c @@ -0,0 +1,1004 @@ +/* + * Misc utility routines for accessing chip-specific features + * of the SiliconBackplane-based Broadcom chips. + * + * Copyright (C) 1999-2010, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: sbutils.c,v 1.662.4.10.2.7.4.2 2010/04/19 05:48:48 Exp $ + */ + +#include <typedefs.h> +#include <bcmdefs.h> +#include <osl.h> +#include <bcmutils.h> +#include <siutils.h> +#include <bcmdevs.h> +#include <hndsoc.h> +#include <sbchipc.h> +#include <pcicfg.h> +#include <sbpcmcia.h> + +#include "siutils_priv.h" + +/* local prototypes */ +static uint _sb_coreidx(si_info_t *sii, uint32 sba); +static uint _sb_scan(si_info_t *sii, uint32 sba, void *regs, uint bus, uint32 sbba, + uint ncores); +static uint32 _sb_coresba(si_info_t *sii); +static void *_sb_setcoreidx(si_info_t *sii, uint coreidx); + +#define SET_SBREG(sii, r, mask, val) \ + W_SBREG((sii), (r), ((R_SBREG((sii), (r)) & ~(mask)) | (val))) +#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) + +/* sonicsrev */ +#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) +#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) + +#define R_SBREG(sii, sbr) sb_read_sbreg((sii), (sbr)) +#define W_SBREG(sii, sbr, v) sb_write_sbreg((sii), (sbr), (v)) +#define AND_SBREG(sii, sbr, v) W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) & (v))) +#define OR_SBREG(sii, sbr, v) W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) | (v))) + +static uint32 +sb_read_sbreg(si_info_t *sii, volatile uint32 *sbr) +{ + uint8 tmp; + uint32 val, intr_val = 0; + + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if (PCMCIA(sii)) { + INTR_OFF(sii, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1); + sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ + } + + val = R_REG(sii->osh, sbr); + + if (PCMCIA(sii)) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(sii, intr_val); + } + + return (val); +} + +static void +sb_write_sbreg(si_info_t *sii, volatile uint32 *sbr, uint32 v) +{ + uint8 tmp; + volatile uint32 dummy; + uint32 intr_val = 0; + + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if (PCMCIA(sii)) { + INTR_OFF(sii, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1); + sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ + } + + if (BUSTYPE(sii->pub.bustype) == PCMCIA_BUS) { +#ifdef IL_BIGENDIAN + dummy = R_REG(sii->osh, sbr); + W_REG(sii->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); + dummy = R_REG(sii->osh, sbr); + W_REG(sii->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); +#else + dummy = R_REG(sii->osh, sbr); + W_REG(sii->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); + dummy = R_REG(sii->osh, sbr); + W_REG(sii->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); +#endif /* IL_BIGENDIAN */ + } else + W_REG(sii->osh, sbr, v); + + if (PCMCIA(sii)) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(sii, intr_val); + } +} + +uint +sb_coreid(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + return ((R_SBREG(sii, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); +} + +uint +sb_flag(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + return R_SBREG(sii, &sb->sbtpsflag) & SBTPS_NUM0_MASK; +} + +void +sb_setint(si_t *sih, int siflag) +{ + si_info_t *sii; + sbconfig_t *sb; + uint32 vec; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + if (siflag == -1) + vec = 0; + else + vec = 1 << siflag; + W_SBREG(sii, &sb->sbintvec, vec); +} + +/* return core index of the core with address 'sba' */ +static uint +_sb_coreidx(si_info_t *sii, uint32 sba) +{ + uint i; + + for (i = 0; i < sii->numcores; i ++) + if (sba == sii->common_info->coresba[i]) + return i; + return BADIDX; +} + +/* return core address of the current core */ +static uint32 +_sb_coresba(si_info_t *sii) +{ + uint32 sbaddr; + + + switch (BUSTYPE(sii->pub.bustype)) { + case SI_BUS: { + sbconfig_t *sb = REGS2SB(sii->curmap); + sbaddr = sb_base(R_SBREG(sii, &sb->sbadmatch0)); + break; + } + + case PCI_BUS: + sbaddr = OSL_PCI_READ_CONFIG(sii->osh, PCI_BAR0_WIN, sizeof(uint32)); + break; + + case PCMCIA_BUS: { + uint8 tmp = 0; + OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR0, &tmp, 1); + sbaddr = (uint32)tmp << 12; + OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR1, &tmp, 1); + sbaddr |= (uint32)tmp << 16; + OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR2, &tmp, 1); + sbaddr |= (uint32)tmp << 24; + break; + } + + case SPI_BUS: + case SDIO_BUS: + sbaddr = (uint32)(uintptr)sii->curmap; + break; + + + default: + sbaddr = BADCOREADDR; + break; + } + + return sbaddr; +} + +uint +sb_corevendor(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + return ((R_SBREG(sii, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); +} + +uint +sb_corerev(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + uint sbidh; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + sbidh = R_SBREG(sii, &sb->sbidhigh); + + return (SBCOREREV(sbidh)); +} + +/* set core-specific control flags */ +void +sb_core_cflags_wo(si_t *sih, uint32 mask, uint32 val) +{ + si_info_t *sii; + sbconfig_t *sb; + uint32 w; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + ASSERT((val & ~mask) == 0); + + /* mask and set */ + w = (R_SBREG(sii, &sb->sbtmstatelow) & ~(mask << SBTML_SICF_SHIFT)) | + (val << SBTML_SICF_SHIFT); + W_SBREG(sii, &sb->sbtmstatelow, w); +} + +/* set/clear core-specific control flags */ +uint32 +sb_core_cflags(si_t *sih, uint32 mask, uint32 val) +{ + si_info_t *sii; + sbconfig_t *sb; + uint32 w; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + ASSERT((val & ~mask) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sii, &sb->sbtmstatelow) & ~(mask << SBTML_SICF_SHIFT)) | + (val << SBTML_SICF_SHIFT); + W_SBREG(sii, &sb->sbtmstatelow, w); + } + + /* return the new value + * for write operation, the following readback ensures the completion of write opration. + */ + return (R_SBREG(sii, &sb->sbtmstatelow) >> SBTML_SICF_SHIFT); +} + +/* set/clear core-specific status flags */ +uint32 +sb_core_sflags(si_t *sih, uint32 mask, uint32 val) +{ + si_info_t *sii; + sbconfig_t *sb; + uint32 w; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + ASSERT((val & ~mask) == 0); + ASSERT((mask & ~SISF_CORE_BITS) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sii, &sb->sbtmstatehigh) & ~(mask << SBTMH_SISF_SHIFT)) | + (val << SBTMH_SISF_SHIFT); + W_SBREG(sii, &sb->sbtmstatehigh, w); + } + + /* return the new value */ + return (R_SBREG(sii, &sb->sbtmstatehigh) >> SBTMH_SISF_SHIFT); +} + +bool +sb_iscoreup(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + return ((R_SBREG(sii, &sb->sbtmstatelow) & + (SBTML_RESET | SBTML_REJ_MASK | (SICF_CLOCK_EN << SBTML_SICF_SHIFT))) == + (SICF_CLOCK_EN << SBTML_SICF_SHIFT)); +} + +/* + * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, + * switch back to the original core, and return the new value. + * + * When using the silicon backplane, no fidleing with interrupts or core switches are needed. + * + * Also, when using pci/pcie, we can optimize away the core switching for pci registers + * and (on newer pci cores) chipcommon registers. + */ +uint +sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val) +{ + uint origidx = 0; + uint32 *r = NULL; + uint w; + uint intr_val = 0; + bool fast = FALSE; + si_info_t *sii; + + sii = SI_INFO(sih); + + ASSERT(GOODIDX(coreidx)); + ASSERT(regoff < SI_CORE_SIZE); + ASSERT((val & ~mask) == 0); + + if (coreidx >= SI_MAXCORES) + return 0; + + if (BUSTYPE(sii->pub.bustype) == SI_BUS) { + /* If internal bus, we can always get at everything */ + fast = TRUE; + /* map if does not exist */ + if (!sii->common_info->regs[coreidx]) { + sii->common_info->regs[coreidx] = + REG_MAP(sii->common_info->coresba[coreidx], SI_CORE_SIZE); + ASSERT(GOODREGS(sii->common_info->regs[coreidx])); + } + r = (uint32 *)((uchar *)sii->common_info->regs[coreidx] + regoff); + } else if (BUSTYPE(sii->pub.bustype) == PCI_BUS) { + /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */ + + if ((sii->common_info->coreid[coreidx] == CC_CORE_ID) && SI_FAST(sii)) { + /* Chipc registers are mapped at 12KB */ + + fast = TRUE; + r = (uint32 *)((char *)sii->curmap + PCI_16KB0_CCREGS_OFFSET + regoff); + } else if (sii->pub.buscoreidx == coreidx) { + /* pci registers are at either in the last 2KB of an 8KB window + * or, in pcie and pci rev 13 at 8KB + */ + fast = TRUE; + if (SI_FAST(sii)) + r = (uint32 *)((char *)sii->curmap + + PCI_16KB0_PCIREGS_OFFSET + regoff); + else + r = (uint32 *)((char *)sii->curmap + + ((regoff >= SBCONFIGOFF) ? + PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) + + regoff); + } + } + + if (!fast) { + INTR_OFF(sii, intr_val); + + /* save current core index */ + origidx = si_coreidx(&sii->pub); + + /* switch core */ + r = (uint32*) ((uchar*)sb_setcoreidx(&sii->pub, coreidx) + regoff); + } + ASSERT(r != NULL); + + /* mask and set */ + if (mask || val) { + if (regoff >= SBCONFIGOFF) { + w = (R_SBREG(sii, r) & ~mask) | val; + W_SBREG(sii, r, w); + } else { + w = (R_REG(sii->osh, r) & ~mask) | val; + W_REG(sii->osh, r, w); + } + } + + /* readback */ + if (regoff >= SBCONFIGOFF) + w = R_SBREG(sii, r); + else { + if ((CHIPID(sii->pub.chip) == BCM5354_CHIP_ID) && + (coreidx == SI_CC_IDX) && + (regoff == OFFSETOF(chipcregs_t, watchdog))) { + w = val; + } else + w = R_REG(sii->osh, r); + } + + if (!fast) { + /* restore core index */ + if (origidx != coreidx) + sb_setcoreidx(&sii->pub, origidx); + + INTR_RESTORE(sii, intr_val); + } + + return (w); +} + +/* Scan the enumeration space to find all cores starting from the given + * bus 'sbba'. Append coreid and other info to the lists in 'si'. 'sba' + * is the default core address at chip POR time and 'regs' is the virtual + * address that the default core is mapped at. 'ncores' is the number of + * cores expected on bus 'sbba'. It returns the total number of cores + * starting from bus 'sbba', inclusive. + */ +#define SB_MAXBUSES 2 +static uint +_sb_scan(si_info_t *sii, uint32 sba, void *regs, uint bus, uint32 sbba, uint numcores) +{ + uint next; + uint ncc = 0; + uint i; + + if (bus >= SB_MAXBUSES) { + SI_ERROR(("_sb_scan: bus 0x%08x at level %d is too deep to scan\n", sbba, bus)); + return 0; + } + SI_MSG(("_sb_scan: scan bus 0x%08x assume %u cores\n", sbba, numcores)); + + /* Scan all cores on the bus starting from core 0. + * Core addresses must be contiguous on each bus. + */ + for (i = 0, next = sii->numcores; i < numcores && next < SB_BUS_MAXCORES; i++, next++) { + sii->common_info->coresba[next] = sbba + (i * SI_CORE_SIZE); + + /* keep and reuse the initial register mapping */ + if ((BUSTYPE(sii->pub.bustype) == SI_BUS) && + (sii->common_info->coresba[next] == sba)) { + SI_MSG(("_sb_scan: reuse mapped regs %p for core %u\n", regs, next)); + sii->common_info->regs[next] = regs; + } + + /* change core to 'next' and read its coreid */ + sii->curmap = _sb_setcoreidx(sii, next); + sii->curidx = next; + + sii->common_info->coreid[next] = sb_coreid(&sii->pub); + + /* core specific processing... */ + /* chipc provides # cores */ + if (sii->common_info->coreid[next] == CC_CORE_ID) { + chipcregs_t *cc = (chipcregs_t *)sii->curmap; + uint32 ccrev = sb_corerev(&sii->pub); + + /* determine numcores - this is the total # cores in the chip */ + if (((ccrev == 4) || (ccrev >= 6))) + numcores = (R_REG(sii->osh, &cc->chipid) & CID_CC_MASK) >> + CID_CC_SHIFT; + else { + /* Older chips */ + uint chip = sii->pub.chip; + + if (chip == BCM4306_CHIP_ID) /* < 4306c0 */ + numcores = 6; + else if (chip == BCM4704_CHIP_ID) + numcores = 9; + else if (chip == BCM5365_CHIP_ID) + numcores = 7; + else { + SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", + chip)); + ASSERT(0); + numcores = 1; + } + } + SI_MSG(("_sb_scan: there are %u cores in the chip %s\n", numcores, + sii->pub.issim ? "QT" : "")); + } + /* scan bridged SB(s) and add results to the end of the list */ + else if (sii->common_info->coreid[next] == OCP_CORE_ID) { + sbconfig_t *sb = REGS2SB(sii->curmap); + uint32 nsbba = R_SBREG(sii, &sb->sbadmatch1); + uint nsbcc; + + sii->numcores = next + 1; + + if ((nsbba & 0xfff00000) != SI_ENUM_BASE) + continue; + nsbba &= 0xfffff000; + if (_sb_coreidx(sii, nsbba) != BADIDX) + continue; + + nsbcc = (R_SBREG(sii, &sb->sbtmstatehigh) & 0x000f0000) >> 16; + nsbcc = _sb_scan(sii, sba, regs, bus + 1, nsbba, nsbcc); + if (sbba == SI_ENUM_BASE) + numcores -= nsbcc; + ncc += nsbcc; + } + } + + SI_MSG(("_sb_scan: found %u cores on bus 0x%08x\n", i, sbba)); + + sii->numcores = i + ncc; + return sii->numcores; +} + +/* scan the sb enumerated space to identify all cores */ +void +sb_scan(si_t *sih, void *regs, uint devid) +{ + si_info_t *sii; + uint32 origsba; + + sii = SI_INFO(sih); + + /* Save the current core info and validate it later till we know + * for sure what is good and what is bad. + */ + origsba = _sb_coresba(sii); + + /* scan all SB(s) starting from SI_ENUM_BASE */ + sii->numcores = _sb_scan(sii, origsba, regs, 0, SI_ENUM_BASE, 1); +} + +/* + * This function changes logical "focus" to the indicated core; + * must be called with interrupts off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ +void * +sb_setcoreidx(si_t *sih, uint coreidx) +{ + si_info_t *sii; + + sii = SI_INFO(sih); + + if (coreidx >= sii->numcores) + return (NULL); + + /* + * If the user has provided an interrupt mask enabled function, + * then assert interrupts are disabled before switching the core. + */ + ASSERT((sii->intrsenabled_fn == NULL) || !(*(sii)->intrsenabled_fn)((sii)->intr_arg)); + + sii->curmap = _sb_setcoreidx(sii, coreidx); + sii->curidx = coreidx; + + return (sii->curmap); +} + +/* This function changes the logical "focus" to the indicated core. + * Return the current core's virtual address. + */ +static void * +_sb_setcoreidx(si_info_t *sii, uint coreidx) +{ + uint32 sbaddr = sii->common_info->coresba[coreidx]; + void *regs; + + switch (BUSTYPE(sii->pub.bustype)) { + case SI_BUS: + /* map new one */ + if (!sii->common_info->regs[coreidx]) { + sii->common_info->regs[coreidx] = REG_MAP(sbaddr, SI_CORE_SIZE); + ASSERT(GOODREGS(sii->common_info->regs[coreidx])); + } + regs = sii->common_info->regs[coreidx]; + break; + + case PCI_BUS: + /* point bar0 window */ + OSL_PCI_WRITE_CONFIG(sii->osh, PCI_BAR0_WIN, 4, sbaddr); + regs = sii->curmap; + break; + + case PCMCIA_BUS: { + uint8 tmp = (sbaddr >> 12) & 0x0f; + OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR0, &tmp, 1); + tmp = (sbaddr >> 16) & 0xff; + OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR1, &tmp, 1); + tmp = (sbaddr >> 24) & 0xff; + OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR2, &tmp, 1); + regs = sii->curmap; + break; + } + case SPI_BUS: + case SDIO_BUS: + /* map new one */ + if (!sii->common_info->regs[coreidx]) { + sii->common_info->regs[coreidx] = (void *)(uintptr)sbaddr; + ASSERT(GOODREGS(sii->common_info->regs[coreidx])); + } + regs = sii->common_info->regs[coreidx]; + break; + + + default: + ASSERT(0); + regs = NULL; + break; + } + + return regs; +} + +/* Return the address of sbadmatch0/1/2/3 register */ +static volatile uint32 * +sb_admatch(si_info_t *sii, uint asidx) +{ + sbconfig_t *sb; + volatile uint32 *addrm; + + sb = REGS2SB(sii->curmap); + + switch (asidx) { + case 0: + addrm = &sb->sbadmatch0; + break; + + case 1: + addrm = &sb->sbadmatch1; + break; + + case 2: + addrm = &sb->sbadmatch2; + break; + + case 3: + addrm = &sb->sbadmatch3; + break; + + default: + SI_ERROR(("%s: Address space index (%d) out of range\n", __FUNCTION__, asidx)); + return 0; + } + + return (addrm); +} + +/* Return the number of address spaces in current core */ +int +sb_numaddrspaces(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + sb = REGS2SB(sii->curmap); + + /* + 1 because of enumeration space */ + return ((R_SBREG(sii, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT) + 1; +} + +/* Return the address of the nth address space in the current core */ +uint32 +sb_addrspace(si_t *sih, uint asidx) +{ + si_info_t *sii; + + sii = SI_INFO(sih); + + return (sb_base(R_SBREG(sii, sb_admatch(sii, asidx)))); +} + +/* Return the size of the nth address space in the current core */ +uint32 +sb_addrspacesize(si_t *sih, uint asidx) +{ + si_info_t *sii; + + sii = SI_INFO(sih); + + return (sb_size(R_SBREG(sii, sb_admatch(sii, asidx)))); +} + + +/* do buffered registers update */ +void +sb_commit(si_t *sih) +{ + si_info_t *sii; + uint origidx; + uint intr_val = 0; + + sii = SI_INFO(sih); + + origidx = sii->curidx; + ASSERT(GOODIDX(origidx)); + + INTR_OFF(sii, intr_val); + + /* switch over to chipcommon core if there is one, else use pci */ + if (sii->pub.ccrev != NOREV) { + chipcregs_t *ccregs = (chipcregs_t *)si_setcore(sih, CC_CORE_ID, 0); + + /* do the buffer registers update */ + W_REG(sii->osh, &ccregs->broadcastaddress, SB_COMMIT); + W_REG(sii->osh, &ccregs->broadcastdata, 0x0); + } else + ASSERT(0); + + /* restore core index */ + sb_setcoreidx(sih, origidx); + INTR_RESTORE(sii, intr_val); +} + +void +sb_core_disable(si_t *sih, uint32 bits) +{ + si_info_t *sii; + volatile uint32 dummy; + sbconfig_t *sb; + + sii = SI_INFO(sih); + + ASSERT(GOODREGS(sii->curmap)); + sb = REGS2SB(sii->curmap); + + /* if core is already in reset, just return */ + if (R_SBREG(sii, &sb->sbtmstatelow) & SBTML_RESET) + return; + + /* if clocks are not enabled, put into reset and return */ + if ((R_SBREG(sii, &sb->sbtmstatelow) & (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) == 0) + goto disable; + + /* set target reject and spin until busy is clear (preserve core-specific bits) */ + OR_SBREG(sii, &sb->sbtmstatelow, SBTML_REJ); + dummy = R_SBREG(sii, &sb->sbtmstatelow); + OSL_DELAY(1); + SPINWAIT((R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); + if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY) + SI_ERROR(("%s: target state still busy\n", __FUNCTION__)); + + if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT) { + OR_SBREG(sii, &sb->sbimstate, SBIM_RJ); + dummy = R_SBREG(sii, &sb->sbimstate); + OSL_DELAY(1); + SPINWAIT((R_SBREG(sii, &sb->sbimstate) & SBIM_BY), 100000); + } + + /* set reset and reject while enabling the clocks */ + W_SBREG(sii, &sb->sbtmstatelow, + (((bits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) | + SBTML_REJ | SBTML_RESET)); + dummy = R_SBREG(sii, &sb->sbtmstatelow); + OSL_DELAY(10); + + /* don't forget to clear the initiator reject bit */ + if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT) + AND_SBREG(sii, &sb->sbimstate, ~SBIM_RJ); + +disable: + /* leave reset and reject asserted */ + W_SBREG(sii, &sb->sbtmstatelow, ((bits << SBTML_SICF_SHIFT) | SBTML_REJ | SBTML_RESET)); + OSL_DELAY(1); +} + +/* reset and re-enable a core + * inputs: + * bits - core specific bits that are set during and after reset sequence + * resetbits - core specific bits that are set only during reset sequence + */ +void +sb_core_reset(si_t *sih, uint32 bits, uint32 resetbits) +{ + si_info_t *sii; + sbconfig_t *sb; + volatile uint32 dummy; + + sii = SI_INFO(sih); + ASSERT(GOODREGS(sii->curmap)); + sb = REGS2SB(sii->curmap); + + /* + * Must do the disable sequence first to work for arbitrary current core state. + */ + sb_core_disable(sih, (bits | resetbits)); + + /* + * Now do the initialization sequence. + */ + + /* set reset while enabling the clock and forcing them on throughout the core */ + W_SBREG(sii, &sb->sbtmstatelow, + (((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) | + SBTML_RESET)); + dummy = R_SBREG(sii, &sb->sbtmstatelow); + OSL_DELAY(1); + + if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_SERR) { + W_SBREG(sii, &sb->sbtmstatehigh, 0); + } + if ((dummy = R_SBREG(sii, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { + AND_SBREG(sii, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + } + + /* clear reset and allow it to propagate throughout the core */ + W_SBREG(sii, &sb->sbtmstatelow, + ((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT)); + dummy = R_SBREG(sii, &sb->sbtmstatelow); + OSL_DELAY(1); + + /* leave clock enabled */ + W_SBREG(sii, &sb->sbtmstatelow, ((bits | SICF_CLOCK_EN) << SBTML_SICF_SHIFT)); + dummy = R_SBREG(sii, &sb->sbtmstatelow); + OSL_DELAY(1); +} + +void +sb_core_tofixup(si_t *sih) +{ + si_info_t *sii; + sbconfig_t *sb; + + sii = SI_INFO(sih); + + if ((BUSTYPE(sii->pub.bustype) != PCI_BUS) || PCIE(sii) || + (PCI(sii) && (sii->pub.buscorerev >= 5))) + return; + + ASSERT(GOODREGS(sii->curmap)); + sb = REGS2SB(sii->curmap); + + if (BUSTYPE(sii->pub.bustype) == SI_BUS) { + SET_SBREG(sii, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x5 << SBIMCL_RTO_SHIFT) | 0x3); + } else { + if (sb_coreid(sih) == PCI_CORE_ID) { + SET_SBREG(sii, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + } else { + SET_SBREG(sii, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); + } + } + + sb_commit(sih); +} + +/* + * Set the initiator timeout for the "master core". + * The master core is defined to be the core in control + * of the chip and so it issues accesses to non-memory + * locations (Because of dma *any* core can access memeory). + * + * The routine uses the bus to decide who is the master: + * SI_BUS => mips + * JTAG_BUS => chipc + * PCI_BUS => pci or pcie + * PCMCIA_BUS => pcmcia + * SDIO_BUS => pcmcia + * + * This routine exists so callers can disable initiator + * timeouts so accesses to very slow devices like otp + * won't cause an abort. The routine allows arbitrary + * settings of the service and request timeouts, though. + * + * Returns the timeout state before changing it or -1 + * on error. + */ + +#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK) + +uint32 +sb_set_initiator_to(si_t *sih, uint32 to, uint idx) +{ + si_info_t *sii; + uint origidx; + uint intr_val = 0; + uint32 tmp, ret = 0xffffffff; + sbconfig_t *sb; + + sii = SI_INFO(sih); + + if ((to & ~TO_MASK) != 0) + return ret; + + /* Figure out the master core */ + if (idx == BADIDX) { + switch (BUSTYPE(sii->pub.bustype)) { + case PCI_BUS: + idx = sii->pub.buscoreidx; + break; + case JTAG_BUS: + idx = SI_CC_IDX; + break; + case PCMCIA_BUS: + case SDIO_BUS: + idx = si_findcoreidx(sih, PCMCIA_CORE_ID, 0); + break; + case SI_BUS: + idx = si_findcoreidx(sih, MIPS33_CORE_ID, 0); + break; + default: + ASSERT(0); + } + if (idx == BADIDX) + return ret; + } + + INTR_OFF(sii, intr_val); + origidx = si_coreidx(sih); + + sb = REGS2SB(sb_setcoreidx(sih, idx)); + + tmp = R_SBREG(sii, &sb->sbimconfiglow); + ret = tmp & TO_MASK; + W_SBREG(sii, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to); + + sb_commit(sih); + sb_setcoreidx(sih, origidx); + INTR_RESTORE(sii, intr_val); + return ret; +} + +uint32 +sb_base(uint32 admatch) +{ + uint32 base; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + base = 0; + + if (type == 0) { + base = admatch & SBAM_BASE0_MASK; + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE1_MASK; + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE2_MASK; + } + + return (base); +} + +uint32 +sb_size(uint32 admatch) +{ + uint32 size; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + size = 0; + + if (type == 0) { + size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); + } + + return (size); +} |