Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 157 insertions, 112 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 11fd1c735589..4891e3df2058 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -25,6 +25,7 @@
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
 
 #include <defs.h>
 #include <brcm_hw_ids.h>
@@ -37,16 +38,15 @@
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
-static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
+
+static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev_id);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
-	brcmf_dbg(INTR, "oob intr triggered\n");
+	brcmf_dbg(INTR, "OOB intr triggered\n");
 
-	/*
-	 * out-of-band interrupt is level-triggered which won't
+	/* out-of-band interrupt is level-triggered which won't
 	 * be cleared until dpc
 	 */
 	if (sdiodev->irq_en) {
@@ -59,72 +59,12 @@ static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
-{
-	int ret = 0;
-	u8 data;
-	unsigned long flags;
-
-	brcmf_dbg(TRACE, "Entering: irq %d\n", sdiodev->irq);
-
-	ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
-			  sdiodev->irq_flags, "brcmf_oob_intr",
-			  &sdiodev->func[1]->dev);
-	if (ret != 0)
-		return ret;
-	spin_lock_init(&sdiodev->irq_en_lock);
-	spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
-	sdiodev->irq_en = true;
-	spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
-
-	ret = enable_irq_wake(sdiodev->irq);
-	if (ret != 0)
-		return ret;
-	sdiodev->irq_wake = true;
-
-	sdio_claim_host(sdiodev->func[1]);
-
-	/* must configure SDIO_CCCR_IENx to enable irq */
-	data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
-	data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
-
-	/* redirect, configure and enable io for interrupt signal */
-	data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
-	if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
-		data |= SDIO_SEPINT_ACT_HI;
-	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-
-	sdio_release_host(sdiodev->func[1]);
-
-	return 0;
-}
-
-int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
-{
-	brcmf_dbg(TRACE, "Entering\n");
-
-	sdio_claim_host(sdiodev->func[1]);
-	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
-	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
-	sdio_release_host(sdiodev->func[1]);
-
-	if (sdiodev->irq_wake) {
-		disable_irq_wake(sdiodev->irq);
-		sdiodev->irq_wake = false;
-	}
-	free_irq(sdiodev->irq, &sdiodev->func[1]->dev);
-	sdiodev->irq_en = false;
-
-	return 0;
-}
-#else		/* CONFIG_BRCMFMAC_SDIO_OOB */
-static void brcmf_sdio_irqhandler(struct sdio_func *func)
+static void brcmf_sdio_ib_irqhandler(struct sdio_func *func)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
-	brcmf_dbg(INTR, "ib intr triggered\n");
+	brcmf_dbg(INTR, "IB intr triggered\n");
 
 	brcmf_sdbrcm_isr(sdiodev->bus);
 }
@@ -136,28 +76,89 @@ static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
 
 int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
-	brcmf_dbg(TRACE, "Entering\n");
+	int ret = 0;
+	u8 data;
+	unsigned long flags;
 
-	sdio_claim_host(sdiodev->func[1]);
-	sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler);
-	sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
-	sdio_release_host(sdiodev->func[1]);
+	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+		brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
+			  sdiodev->pdata->oob_irq_nr);
+		ret = request_irq(sdiodev->pdata->oob_irq_nr,
+				  brcmf_sdio_oob_irqhandler,
+				  sdiodev->pdata->oob_irq_flags,
+				  "brcmf_oob_intr",
+				  &sdiodev->func[1]->dev);
+		if (ret != 0) {
+			brcmf_err("request_irq failed %d\n", ret);
+			return ret;
+		}
+		sdiodev->oob_irq_requested = true;
+		spin_lock_init(&sdiodev->irq_en_lock);
+		spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
+		sdiodev->irq_en = true;
+		spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+
+		ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr);
+		if (ret != 0) {
+			brcmf_err("enable_irq_wake failed %d\n", ret);
+			return ret;
+		}
+		sdiodev->irq_wake = true;
+
+		sdio_claim_host(sdiodev->func[1]);
+
+		/* must configure SDIO_CCCR_IENx to enable irq */
+		data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+
+		/* redirect, configure and enable io for interrupt signal */
+		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+		if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
+			data |= SDIO_SEPINT_ACT_HI;
+		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
+
+		sdio_release_host(sdiodev->func[1]);
+	} else {
+		brcmf_dbg(SDIO, "Entering\n");
+		sdio_claim_host(sdiodev->func[1]);
+		sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler);
+		sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
+		sdio_release_host(sdiodev->func[1]);
+	}
 
 	return 0;
 }
 
 int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
-	brcmf_dbg(TRACE, "Entering\n");
-
-	sdio_claim_host(sdiodev->func[1]);
-	sdio_release_irq(sdiodev->func[2]);
-	sdio_release_irq(sdiodev->func[1]);
-	sdio_release_host(sdiodev->func[1]);
+	brcmf_dbg(SDIO, "Entering\n");
+
+	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+		sdio_claim_host(sdiodev->func[1]);
+		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+		sdio_release_host(sdiodev->func[1]);
+
+		if (sdiodev->oob_irq_requested) {
+			sdiodev->oob_irq_requested = false;
+			if (sdiodev->irq_wake) {
+				disable_irq_wake(sdiodev->pdata->oob_irq_nr);
+				sdiodev->irq_wake = false;
+			}
+			free_irq(sdiodev->pdata->oob_irq_nr,
+				 &sdiodev->func[1]->dev);
+			sdiodev->irq_en = false;
+		}
+	} else {
+		sdio_claim_host(sdiodev->func[1]);
+		sdio_release_irq(sdiodev->func[2]);
+		sdio_release_irq(sdiodev->func[1]);
+		sdio_release_host(sdiodev->func[1]);
+	}
 
 	return 0;
 }
-#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 
 int
 brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
@@ -253,9 +254,9 @@ u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	u8 data;
 	int retval;
 
-	brcmf_dbg(INFO, "addr:0x%08x\n", addr);
+	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
 	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
-	brcmf_dbg(INFO, "data:0x%02x\n", data);
+	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
 	if (ret)
 		*ret = retval;
@@ -268,9 +269,9 @@ u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	u32 data;
 	int retval;
 
-	brcmf_dbg(INFO, "addr:0x%08x\n", addr);
+	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
 	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
-	brcmf_dbg(INFO, "data:0x%08x\n", data);
+	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
 	if (ret)
 		*ret = retval;
@@ -283,7 +284,7 @@ void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 {
 	int retval;
 
-	brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data);
+	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
 	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
 
 	if (ret)
@@ -295,7 +296,7 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 {
 	int retval;
 
-	brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data);
+	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
 	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
 
 	if (ret)
@@ -358,7 +359,7 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	uint width;
 	int err = 0;
 
-	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
+	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
@@ -381,7 +382,7 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	uint width;
 	int err = 0;
 
-	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
+	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pktq->qlen);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
@@ -428,7 +429,7 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
 
-	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
+	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
 
 	/* Async not implemented yet */
@@ -457,48 +458,92 @@ done:
 	return err;
 }
 
-int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr,
-			u8 *buf, uint nbytes)
+int
+brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+		 u8 *data, uint size)
 {
-	struct sk_buff *mypkt;
-	bool write = rw ? SDIOH_WRITE : SDIOH_READ;
-	int err;
+	int bcmerror = 0;
+	struct sk_buff *pkt;
+	u32 sdaddr;
+	uint dsize;
+
+	dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
+	pkt = dev_alloc_skb(dsize);
+	if (!pkt) {
+		brcmf_err("dev_alloc_skb failed: len %d\n", dsize);
+		return -EIO;
+	}
+	pkt->priority = 0;
 
-	addr &= SBSDIO_SB_OFT_ADDR_MASK;
-	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+	/* Determine initial transfer parameters */
+	sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
+	if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK)
+		dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr);
+	else
+		dsize = size;
 
-	mypkt = brcmu_pkt_buf_get_skb(nbytes);
-	if (!mypkt) {
-		brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
-			  nbytes);
-		return -EIO;
+	sdio_claim_host(sdiodev->func[1]);
+
+	/* Do the transfer(s) */
+	while (size) {
+		/* Set the backplane window to include the start address */
+		bcmerror = brcmf_sdcard_set_sbaddr_window(sdiodev, address);
+		if (bcmerror)
+			break;
+
+		brcmf_dbg(SDIO, "%s %d bytes at offset 0x%08x in window 0x%08x\n",
+			  write ? "write" : "read", dsize,
+			  sdaddr, address & SBSDIO_SBWINDOW_MASK);
+
+		sdaddr &= SBSDIO_SB_OFT_ADDR_MASK;
+		sdaddr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+		skb_put(pkt, dsize);
+		if (write)
+			memcpy(pkt->data, data, dsize);
+		bcmerror = brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC,
+						      write, SDIO_FUNC_1,
+						      sdaddr, pkt);
+		if (bcmerror) {
+			brcmf_err("membytes transfer failed\n");
+			break;
+		}
+		if (!write)
+			memcpy(data, pkt->data, dsize);
+		skb_trim(pkt, dsize);
+
+		/* Adjust for next transfer (if any) */
+		size -= dsize;
+		if (size) {
+			data += dsize;
+			address += dsize;
+			sdaddr = 0;
+			dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
+		}
 	}
 
-	/* For a write, copy the buffer data into the packet. */
-	if (write)
-		memcpy(mypkt->data, buf, nbytes);
+	dev_kfree_skb(pkt);
 
-	err = brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC, write,
-					 SDIO_FUNC_1, addr, mypkt);
+	/* Return the window to backplane enumeration space for core access */
+	if (brcmf_sdcard_set_sbaddr_window(sdiodev, sdiodev->sbwad))
+		brcmf_err("FAILED to set window back to 0x%x\n",
+			  sdiodev->sbwad);
 
-	/* For a read, copy the packet data back to the buffer. */
-	if (!err && !write)
-		memcpy(buf, mypkt->data, nbytes);
+	sdio_release_host(sdiodev->func[1]);
 
-	brcmu_pkt_buf_free_skb(mypkt);
-	return err;
+	return bcmerror;
 }
 
 int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 {
 	char t_func = (char)fn;
-	brcmf_dbg(TRACE, "Enter\n");
+	brcmf_dbg(SDIO, "Enter\n");
 
 	/* issue abort cmd52 command through F0 */
 	brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
 				 SDIO_CCCR_ABORT, &t_func);
 
-	brcmf_dbg(TRACE, "Exit\n");
+	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
 }