Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 10 insertions, 114 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 8d80e233bc7a..2629a6602dfa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -24,26 +24,12 @@
  *
  *****************************************************************************/
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
 #include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
 #include "iwl-cfg.h"
-#include "iwl-prph.h"
+#include "iwl-csr.h"
+#include "iwl-agn-hw.h"
 
 /* Highest firmware API version supported */
 #define IWL1000_UCODE_API_MAX 5
@@ -57,6 +43,10 @@
 #define IWL1000_UCODE_API_MIN 1
 #define IWL100_UCODE_API_MIN 5
 
+/* EEPROM version */
+#define EEPROM_1000_TX_POWER_VERSION	(4)
+#define EEPROM_1000_EEPROM_VERSION	(0x15C)
+
 #define IWL1000_FW_PRE "iwlwifi-1000-"
 #define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode"
 
@@ -64,100 +54,8 @@
 #define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode"
 
 
-/*
- * For 1000, use advance thermal throttling critical temperature threshold,
- * but legacy thermal management implementation for now.
- * This is for the reason of 1000 uCode using advance thermal throttling API
- * but not implement ct_kill_exit based on ct_kill exit temperature
- * so the thermal throttling will still based on legacy thermal throttling
- * management.
- * The code here need to be modified once 1000 uCode has the advanced thermal
- * throttling algorithm in place
- */
-static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
-{
-	/* want Celsius */
-	hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
-	hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 1000 series */
-static void iwl1000_nic_config(struct iwl_priv *priv)
-{
-	/* set CSR_HW_CONFIG_REG for uCode use */
-	iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG,
-		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
-		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
-	/* Setting digital SVR for 1000 card to 1.32V */
-	/* locking is acquired in iwl_set_bits_mask_prph() function */
-	iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG,
-				APMG_SVR_DIGITAL_VOLTAGE_1_32,
-				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
-}
-
-static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
-	.min_nrg_cck = 95,
-	.auto_corr_min_ofdm = 90,
-	.auto_corr_min_ofdm_mrc = 170,
-	.auto_corr_min_ofdm_x1 = 120,
-	.auto_corr_min_ofdm_mrc_x1 = 240,
-
-	.auto_corr_max_ofdm = 120,
-	.auto_corr_max_ofdm_mrc = 210,
-	.auto_corr_max_ofdm_x1 = 155,
-	.auto_corr_max_ofdm_mrc_x1 = 290,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 200,
-	.auto_corr_min_cck_mrc = 170,
-	.auto_corr_max_cck_mrc = 400,
-	.nrg_th_cck = 95,
-	.nrg_th_ofdm = 95,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 390,
-	.nrg_th_cca = 62,
-};
-
-static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
-{
-	hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ);
-
-	hw_params(priv).tx_chains_num =
-		num_of_ant(hw_params(priv).valid_tx_ant);
-	if (cfg(priv)->rx_with_siso_diversity)
-		hw_params(priv).rx_chains_num = 1;
-	else
-		hw_params(priv).rx_chains_num =
-			num_of_ant(hw_params(priv).valid_rx_ant);
-
-	iwl1000_set_ct_threshold(priv);
-
-	/* Set initial sensitivity parameters */
-	hw_params(priv).sens = &iwl1000_sensitivity;
-}
-
-static struct iwl_lib_ops iwl1000_lib = {
-	.set_hw_params = iwl1000_hw_set_hw_params,
-	.nic_config = iwl1000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REGULATORY_BAND_NO_HT40,
-		},
-	},
-	.temperature = iwlagn_temperature,
-};
-
 static const struct iwl_base_params iwl1000_base_params = {
 	.num_of_queues = IWLAGN_NUM_QUEUES,
-	.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
@@ -166,15 +64,13 @@ static const struct iwl_base_params iwl1000_base_params = {
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.wd_timeout = IWL_WATCHHDOG_DISABLED,
 	.max_event_log_size = 128,
-	.wd_disable = true,
 };
 
 static const struct iwl_ht_params iwl1000_ht_params = {
 	.ht_greenfield_support = true,
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
-	.smps_mode = IEEE80211_SMPS_DYNAMIC,
 };
 
 #define IWL_DEVICE_1000						\
@@ -182,11 +78,11 @@ static const struct iwl_ht_params iwl1000_ht_params = {
 	.ucode_api_max = IWL1000_UCODE_API_MAX,			\
 	.ucode_api_ok = IWL1000_UCODE_API_OK,			\
 	.ucode_api_min = IWL1000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_1000,		\
 	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
-	.lib = &iwl1000_lib,					\
 	.base_params = &iwl1000_base_params,			\
 	.led_mode = IWL_LED_BLINK
 
@@ -206,11 +102,11 @@ const struct iwl_cfg iwl1000_bg_cfg = {
 	.ucode_api_max = IWL100_UCODE_API_MAX,			\
 	.ucode_api_ok = IWL100_UCODE_API_OK,			\
 	.ucode_api_min = IWL100_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_100,			\
 	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
-	.lib = &iwl1000_lib,					\
 	.base_params = &iwl1000_base_params,			\
 	.led_mode = IWL_LED_RF_STATE,				\
 	.rx_with_siso_diversity = true