iwlwifi: clean up module parameters

For now at least, all module parameters should be
with the core functionality, so move them there,
while at it rename to iwlwifi_mod_params. Also
rename iwl-shared.h to iwl-modparams.h to reflect
the real contents.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 9 insertions, 82 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 0aba3780160f..e219868464bf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -52,6 +52,7 @@
 #include "iwl-trans.h"
 #include "iwl-op-mode.h"
 #include "iwl-drv.h"
+#include "iwl-modparams.h"
 
 /******************************************************************************
  *
@@ -752,7 +753,7 @@ void iwl_send_bt_config(struct iwl_priv *priv)
 		.kill_cts_mask = 0,
 	};
 
-	if (!iwlagn_mod_params.bt_coex_active)
+	if (!iwlwifi_mod_params.bt_coex_active)
 		bt_cmd.flags = BT_COEX_DISABLE;
 	else
 		bt_cmd.flags = BT_COEX_ENABLE;
@@ -1190,7 +1191,7 @@ static void iwl_init_ht_hw_capab(const struct iwl_priv *priv,
 		max_bit_rate = MAX_BIT_RATE_40_MHZ;
 	}
 
-	if (iwlagn_mod_params.amsdu_size_8K)
+	if (iwlwifi_mod_params.amsdu_size_8K)
 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 
 	ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
@@ -1428,7 +1429,7 @@ void iwl_set_hw_params(struct iwl_priv *priv)
 		priv->hw_params.use_rts_for_aggregation =
 			priv->cfg->ht_params->use_rts_for_aggregation;
 
-	if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
+	if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
 		priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
 
 	/* Device-specific setup */
@@ -1554,8 +1555,8 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	trans_cfg.op_mode = op_mode;
 	trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
 	trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
-	trans_cfg.rx_buf_size_8k = iwlagn_mod_params.amsdu_size_8K;
-	if (!iwlagn_mod_params.wd_disable)
+	trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
+	if (!iwlwifi_mod_params.wd_disable)
 		trans_cfg.queue_watchdog_timeout =
 			priv->cfg->base_params->wd_timeout;
 	else
@@ -1600,12 +1601,12 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 
 	/* is antenna coupling more than 35dB ? */
 	priv->bt_ant_couple_ok =
-		(iwlagn_mod_params.ant_coupling >
+		(iwlwifi_mod_params.ant_coupling >
 			IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
 			true : false;
 
 	/* enable/disable bt channel inhibition */
-	priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce;
+	priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce;
 	IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
 		       (priv->bt_ch_announce) ? "On" : "Off");
 
@@ -2204,7 +2205,7 @@ static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
 	}
 
 	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		if (iwlagn_mod_params.restart_fw) {
+		if (iwlwifi_mod_params.restart_fw) {
 			IWL_DEBUG_FW_ERRORS(priv,
 				  "Restarting adapter due to uCode error.\n");
 			queue_work(priv->workqueue, &priv->restart);
@@ -2394,77 +2395,3 @@ static void __exit iwl_exit(void)
 
 module_exit(iwl_exit);
 module_init(iwl_init);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwlagn_mod_params.debug_level, uint,
-		   S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-
-module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO);
-MODULE_PARM_DESC(11n_disable,
-	"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
-module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
-		   int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-
-module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling,
-		   int, S_IRUGO);
-MODULE_PARM_DESC(antenna_coupling,
-		 "specify antenna coupling in dB (defualt: 0 dB)");
-
-module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce,
-		   bool, S_IRUGO);
-MODULE_PARM_DESC(bt_ch_inhibition,
-		 "Enable BT channel inhibition (default: enable)");
-
-module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
-MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
-
-module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
-MODULE_PARM_DESC(wd_disable,
-		"Disable stuck queue watchdog timer 0=system default, "
-		"1=disable, 2=enable (default: 0)");
-
-/*
- * set bt_coex_active to true, uCode will do kill/defer
- * every time the priority line is asserted (BT is sending signals on the
- * priority line in the PCIx).
- * set bt_coex_active to false, uCode will ignore the BT activity and
- * perform the normal operation
- *
- * User might experience transmit issue on some platform due to WiFi/BT
- * co-exist problem. The possible behaviors are:
- *   Able to scan and finding all the available AP
- *   Not able to associate with any AP
- * On those platforms, WiFi communication can be restored by set
- * "bt_coex_active" module parameter to "false"
- *
- * default: bt_coex_active = true (BT_COEX_ENABLE)
- */
-module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
-		bool, S_IRUGO);
-MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
-
-module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "0=system default, "
-		"1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
-
-module_param_named(power_save, iwlagn_mod_params.power_save,
-		bool, S_IRUGO);
-MODULE_PARM_DESC(power_save,
-		 "enable WiFi power management (default: disable)");
-
-module_param_named(power_level, iwlagn_mod_params.power_level,
-		int, S_IRUGO);
-MODULE_PARM_DESC(power_level,
-		 "default power save level (range from 1 - 5, default: 1)");
-
-module_param_named(auto_agg, iwlagn_mod_params.auto_agg,
-		bool, S_IRUGO);
-MODULE_PARM_DESC(auto_agg,
-		 "enable agg w/o check traffic load (default: enable)");