iwl3945: use iwl_mac_config from iwlwifi

3945 can now use iwl_mac_config from iwlwifi

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 133 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5cc30a223cf0..4640996aa298 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2036,139 +2036,6 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-/**
- * iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					conf->channel->hw_value, changed);
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-			test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-	}
-
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
-		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-			!is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d in band %d not "
-				"IBSS channel\n",
-				conf->channel->hw_value, conf->channel->band);
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		priv->current_ht_config.is_ht = conf_is_ht(conf);
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-
-		/* if we are switching from ht to 2.4 clear flags
-		 * from any ht related info since 2.4 does not
-		 * support ht */
-		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
-			priv->staging_rxon.flags = 0;
-
-		iwl_set_rxon_channel(priv, conf->channel);
-
-		iwl_set_flags_for_band(priv, conf->channel->band);
-		spin_unlock_irqrestore(&priv->lock, flags);
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (conf->flags & IEEE80211_CONF_PS)
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-		else
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-			iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						"waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled)
-			iwl_radio_kill_sw_disable_radio(priv);
-	}
-
-	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-		goto out;
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwlcore_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
-
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
 static void iwl_config_ap(struct iwl_priv *priv)
 {
 	int ret = 0;