Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

1 files changed, 71 insertions, 4 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index ef49440bd7f6..72fbf47229db 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -66,6 +66,66 @@
 #include "iwl-core.h"
 #include "iwl-calib.h"
 
+/*****************************************************************************
+ * INIT calibrations framework
+ *****************************************************************************/
+
+ int iwl_send_calib_results(struct iwl_priv *priv)
+{
+	int ret = 0;
+	int i = 0;
+
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_PHY_CALIBRATION_CMD,
+		.meta.flags = CMD_SIZE_HUGE,
+	};
+
+	for (i = 0; i < IWL_CALIB_MAX; i++)
+		if (priv->calib_results[i].buf) {
+			hcmd.len = priv->calib_results[i].buf_len;
+			hcmd.data = priv->calib_results[i].buf;
+			ret = iwl_send_cmd_sync(priv, &hcmd);
+			if (ret)
+				goto err;
+		}
+
+	return 0;
+err:
+	IWL_ERROR("Error %d iteration %d\n", ret, i);
+	return ret;
+}
+EXPORT_SYMBOL(iwl_send_calib_results);
+
+int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len)
+{
+	if (res->buf_len != len) {
+		kfree(res->buf);
+		res->buf = kzalloc(len, GFP_ATOMIC);
+	}
+	if (unlikely(res->buf == NULL))
+		return -ENOMEM;
+
+	res->buf_len = len;
+	memcpy(res->buf, buf, len);
+	return 0;
+}
+EXPORT_SYMBOL(iwl_calib_set);
+
+void iwl_calib_free_results(struct iwl_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < IWL_CALIB_MAX; i++) {
+		kfree(priv->calib_results[i].buf);
+		priv->calib_results[i].buf = NULL;
+		priv->calib_results[i].buf_len = 0;
+	}
+}
+
+/*****************************************************************************
+ * RUNTIME calibrations framework
+ *****************************************************************************/
+
 /* "false alarms" are signals that our DSP tries to lock onto,
  *   but then determines that they are either noise, or transmissions
  *   from a distant wireless network (also "noise", really) that get
@@ -748,13 +808,11 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
 		}
 	}
 
+	/* Save for use within RXON, TX, SCAN commands, etc. */
+	priv->chain_noise_data.active_chains = active_chains;
 	IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
 			active_chains);
 
-	/* Save for use within RXON, TX, SCAN commands, etc. */
-	/*priv->valid_antenna = active_chains;*/
-	/*FIXME: should be reflected in RX chains in RXON */
-
 	/* Analyze noise for rx balance */
 	average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
 	average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
@@ -779,6 +837,15 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
 
 	priv->cfg->ops->utils->gain_computation(priv, average_noise,
 		min_average_noise_antenna_i, min_average_noise);
+
+	/* Some power changes may have been made during the calibration.
+	 * Update and commit the RXON
+	 */
+	if (priv->cfg->ops->lib->update_chain_flags)
+		priv->cfg->ops->lib->update_chain_flags(priv);
+
+	data->state = IWL_CHAIN_NOISE_DONE;
+	iwl_power_enable_management(priv);
 }
 EXPORT_SYMBOL(iwl_chain_noise_calibration);