Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

1 files changed, 68 insertions, 1 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 100bd0d79681..5f657c501406 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -95,7 +95,8 @@
 #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
 #define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)
 
-#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)
+#define APMG_PCIDEV_STT_VAL_PERSIST_DIS	(0x00000200)
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
 
 #define APMG_RTC_INT_STT_RFKILL		(0x10000000)
 
@@ -105,6 +106,33 @@
 /* Device NMI register */
 #define DEVICE_SET_NMI_REG 0x00a01c30
 
+/* Shared registers (0x0..0x3ff, via target indirect or periphery */
+#define SHR_BASE	0x00a10000
+
+/* Shared GP1 register */
+#define SHR_APMG_GP1_REG		0x01dc
+#define SHR_APMG_GP1_REG_PRPH		(SHR_BASE + SHR_APMG_GP1_REG)
+#define SHR_APMG_GP1_WF_XTAL_LP_EN	0x00000004
+#define SHR_APMG_GP1_CHICKEN_BIT_SELECT	0x80000000
+
+/* Shared DL_CFG register */
+#define SHR_APMG_DL_CFG_REG			0x01c4
+#define SHR_APMG_DL_CFG_REG_PRPH		(SHR_BASE + SHR_APMG_DL_CFG_REG)
+#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK	0x000000c0
+#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL	0x00000080
+#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP	0x00000100
+
+/* Shared APMG_XTAL_CFG register */
+#define SHR_APMG_XTAL_CFG_REG		0x1c0
+#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ	0x80000000
+
+/*
+ * Device reset for family 8000
+ * write to bit 24 in order to reset the CPU
+*/
+#define RELEASE_CPU_RESET		(0x300C)
+#define RELEASE_CPU_RESET_BIT		BIT(24)
+
 /*****************************************************************************
  *                        7000/3000 series SHR DTS addresses                 *
  *****************************************************************************/
@@ -281,4 +309,43 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
 #define OSC_CLK				(0xa04068)
 #define OSC_CLK_FORCE_CONTROL		(0x8)
 
+/* SECURE boot registers */
+#define LMPM_SECURE_BOOT_CONFIG_ADDR	(0x100)
+enum secure_boot_config_reg {
+	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP	= 0x00000001,
+	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ	= 0x00000002,
+};
+
+#define LMPM_SECURE_BOOT_CPU1_STATUS_ADDR	(0x1E30)
+#define LMPM_SECURE_BOOT_CPU2_STATUS_ADDR	(0x1E34)
+enum secure_boot_status_reg {
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_STATUS		= 0x00000001,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED	= 0x00000002,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS	= 0x00000004,
+	LMPM_SECURE_BOOT_CPU_STATUS_VERF_FAIL		= 0x00000008,
+	LMPM_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL	= 0x00000010,
+	LMPM_SECURE_BOOT_STATUS_SUCCESS			= 0x00000003,
+};
+
+#define CSR_UCODE_LOAD_STATUS_ADDR	(0x1E70)
+enum secure_load_status_reg {
+	LMPM_CPU_UCODE_LOADING_STARTED			= 0x00000001,
+	LMPM_CPU_HDRS_LOADING_COMPLETED			= 0x00000003,
+	LMPM_CPU_UCODE_LOADING_COMPLETED		= 0x00000007,
+	LMPM_CPU_STATUS_NUM_OF_LAST_COMPLETED		= 0x000000F8,
+	LMPM_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK	= 0x0000FF00,
+};
+
+#define LMPM_SECURE_INSPECTOR_CODE_ADDR	(0x1E38)
+#define LMPM_SECURE_INSPECTOR_DATA_ADDR	(0x1E3C)
+#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR	(0x1E78)
+#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR	(0x1E7C)
+
+#define LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE	(0x400000)
+#define LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE	(0x402000)
+#define LMPM_SECURE_CPU1_HDR_MEM_SPACE		(0x420000)
+#define LMPM_SECURE_CPU2_HDR_MEM_SPACE		(0x420400)
+
+#define LMPM_SECURE_TIME_OUT	(100)
+
 #endif				/* __iwl_prph_h__ */