Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 67 insertions, 32 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-testmode.h b/drivers/net/wireless/iwlwifi/iwl-testmode.h
index 26138f110340..6ba211b09426 100644
--- a/drivers/net/wireless/iwlwifi/iwl-testmode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-testmode.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -99,7 +99,7 @@
  *	to user application
  * @IWL_TM_CMD_DEV2APP_UCODE_RX_PKT:
  *	commands from kernel space to multicast the spontaneous messages
- *	to user application
+ *	to user application, or reply of host commands
  * @IWL_TM_CMD_DEV2APP_EEPROM_RSP:
  *	commands from kernel space to carry the eeprom response
  *	to user application
@@ -109,18 +109,22 @@
  *	if application has the ownership, the only host command from
  *	testmode will deliver to uCode. Default owner is driver
  *
- * @IWL_TM_CMD_APP2DEV_INDIRECT_REG_READ32:
- * @IWL_TM_CMD_APP2DEV_INDIRECT_REG_WRITE32:
- *	commands from user applicaiton to indirectly access peripheral register
- *
- * @IWL_TM_CMD_APP2DEV_READ_SRAM:
- * @IWL_TM_CMD_APP2DEV_DUMP_SRAM:
- *	commands from user applicaiton to read data in sram
- *
- * @IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: load Weak On Wireless LAN uCode image
+ * @IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: load Wake On Wireless LAN uCode image
  * @IWL_TM_CMD_APP2DEV_GET_FW_VERSION: retrieve uCode version
  * @IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: retrieve ID information in device
- *
+ * @IWL_TM_CMD_APP2DEV_GET_FW_INFO:
+ *	retrieve information of existing loaded uCode image
+ *
+ * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ:
+ * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP:
+ * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE:
+ *	Commands to read/write data from periphery or SRAM memory ranges.
+ *	Fore reading, a READ command is sent from the userspace and the data
+ *	is returned when the user calls a DUMP command.
+ *	For writing, only a WRITE command is used.
+ * @IWL_TM_CMD_APP2DEV_NOTIFICATIONS:
+ *	Command to enable/disable notifications (currently RX packets) from the
+ *	driver to userspace.
  */
 enum iwl_tm_cmd_t {
 	IWL_TM_CMD_APP2DEV_UCODE		= 1,
@@ -140,14 +144,19 @@ enum iwl_tm_cmd_t {
 	IWL_TM_CMD_DEV2APP_UCODE_RX_PKT		= 15,
 	IWL_TM_CMD_DEV2APP_EEPROM_RSP		= 16,
 	IWL_TM_CMD_APP2DEV_OWNERSHIP		= 17,
-	IWL_TM_CMD_APP2DEV_INDIRECT_REG_READ32	= 18,
-	IWL_TM_CMD_APP2DEV_INDIRECT_REG_WRITE32	= 19,
-	IWL_TM_CMD_APP2DEV_READ_SRAM		= 20,
-	IWL_TM_CMD_APP2DEV_DUMP_SRAM		= 21,
+	RESERVED_18				= 18,
+	RESERVED_19				= 19,
+	RESERVED_20				= 20,
+	RESERVED_21				= 21,
 	IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW	= 22,
 	IWL_TM_CMD_APP2DEV_GET_FW_VERSION	= 23,
 	IWL_TM_CMD_APP2DEV_GET_DEVICE_ID	= 24,
-	IWL_TM_CMD_MAX				= 25,
+	IWL_TM_CMD_APP2DEV_GET_FW_INFO		= 25,
+	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ = 26,
+	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP = 27,
+	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE = 28,
+	IWL_TM_CMD_APP2DEV_NOTIFICATIONS	= 29,
+	IWL_TM_CMD_MAX				= 30,
 };
 
 /*
@@ -168,8 +177,6 @@ enum iwl_tm_cmd_t {
  *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE,
  *	The mandatory fields are :
  *	IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID;
- *	IWL_TM_ATTR_COMMAND_FLAG for the flags of the commands;
- *	The optional fields are:
  *	IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload
  *	to the ucode
  *
@@ -218,16 +225,19 @@ enum iwl_tm_cmd_t {
  *	The mandatory fields are:
  *	IWL_TM_ATTR_UCODE_OWNER for the new owner
  *
- * @IWL_TM_ATTR_SRAM_ADDR:
- * @IWL_TM_ATTR_SRAM_SIZE:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_READ_SRAM,
+ * @IWL_TM_ATTR_MEM_ADDR:
+ * @IWL_TM_ATTR_BUFFER_SIZE:
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ
+ *	or IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE.
  *	The mandatory fields are:
- *	IWL_TM_ATTR_SRAM_ADDR for the address in sram
- *	IWL_TM_ATTR_SRAM_SIZE for the buffer size of data reading
+ *	IWL_TM_ATTR_MEM_ADDR for the address in SRAM/periphery to read/write
+ *	IWL_TM_ATTR_BUFFER_SIZE for the buffer size of data to read/write.
  *
- * @IWL_TM_ATTR_SRAM_DUMP:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_DUMP_SRAM,
- *	IWL_TM_ATTR_SRAM_DUMP for the data in sram
+ * @IWL_TM_ATTR_BUFFER_DUMP:
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP,
+ *	IWL_TM_ATTR_BUFFER_DUMP is used for the data that was read.
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE,
+ *	this attribute contains the data to write.
  *
  * @IWL_TM_ATTR_FW_VERSION:
  *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_VERSION,
@@ -237,6 +247,23 @@ enum iwl_tm_cmd_t {
  *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_DEVICE_ID,
  *	IWL_TM_ATTR_DEVICE_ID for the device ID information
  *
+ * @IWL_TM_ATTR_FW_TYPE:
+ * @IWL_TM_ATTR_FW_INST_SIZE:
+ * @IWL_TM_ATTR_FW_DATA_SIZE:
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_INFO,
+ *	The mandatory fields are:
+ *	IWL_TM_ATTR_FW_TYPE for the uCode type (INIT/RUNTIME/...)
+ *	IWL_TM_ATTR_FW_INST_SIZE for the size of instruction section
+ *	IWL_TM_ATTR_FW_DATA_SIZE for the size of data section
+ *
+ * @IWL_TM_ATTR_UCODE_CMD_SKB:
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE this flag
+ *	indicates that the user wants to receive the response of the command
+ *	in a reply SKB. If it's not present, the response is not returned.
+ * @IWL_TM_ATTR_ENABLE_NOTIFICATIONS:
+ *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_NOTIFICATIONS, this
+ *	flag enables (if present) or disables (if not) the forwarding
+ *	to userspace.
  */
 enum iwl_tm_attr_t {
 	IWL_TM_ATTR_NOT_APPLICABLE		= 0,
@@ -254,12 +281,17 @@ enum iwl_tm_attr_t {
 	IWL_TM_ATTR_TRACE_DUMP			= 12,
 	IWL_TM_ATTR_FIXRATE			= 13,
 	IWL_TM_ATTR_UCODE_OWNER			= 14,
-	IWL_TM_ATTR_SRAM_ADDR			= 15,
-	IWL_TM_ATTR_SRAM_SIZE			= 16,
-	IWL_TM_ATTR_SRAM_DUMP			= 17,
+	IWL_TM_ATTR_MEM_ADDR			= 15,
+	IWL_TM_ATTR_BUFFER_SIZE			= 16,
+	IWL_TM_ATTR_BUFFER_DUMP			= 17,
 	IWL_TM_ATTR_FW_VERSION			= 18,
 	IWL_TM_ATTR_DEVICE_ID			= 19,
-	IWL_TM_ATTR_MAX				= 20,
+	IWL_TM_ATTR_FW_TYPE			= 20,
+	IWL_TM_ATTR_FW_INST_SIZE		= 21,
+	IWL_TM_ATTR_FW_DATA_SIZE		= 22,
+	IWL_TM_ATTR_UCODE_CMD_SKB		= 23,
+	IWL_TM_ATTR_ENABLE_NOTIFICATION		= 24,
+	IWL_TM_ATTR_MAX				= 25,
 };
 
 /* uCode trace buffer */
@@ -271,4 +303,7 @@ enum iwl_tm_attr_t {
 /* Maximum data size of each dump it packet */
 #define DUMP_CHUNK_SIZE		(PAGE_SIZE - 1024)
 
+/* Address offset of data segment in SRAM */
+#define SRAM_DATA_SEG_OFFSET   0x800000
+
 #endif