summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
diff options
context:
space:
mode:
authorWey-Yi Guy <wey-yi.w.guy@intel.com>2011-04-19 16:52:59 -0700
committerWey-Yi Guy <wey-yi.w.guy@intel.com>2011-04-30 08:40:04 -0700
commitc1821c95c13240c2c8d3da8845c2021e575e29c6 (patch)
tree02ff781d5a41f01b47e4ed557aac8113667ef075 /drivers/net/wireless/iwlwifi
parent89e746b244064406c3bfe442bb64c3230f42fa98 (diff)
iwlagn: connect and disconnect sequence for RXON
No functional changes, separate the connect and disconnect sequences in RXON commit function, easier to read and understand. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rxon.c194
1 files changed, 111 insertions, 83 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 7f52ab8f5848..178b2b5a53b4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -169,6 +169,103 @@ static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
return ret;
}
+static int iwlagn_rxon_disconn(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret;
+ struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+ if (ctx->ctxid == IWL_RXON_CTX_BSS)
+ ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+ else
+ ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+ if (ret)
+ return ret;
+
+ /*
+ * Un-assoc RXON clears the station table and WEP
+ * keys, so we have to restore those afterwards.
+ */
+ iwl_clear_ucode_stations(priv, ctx);
+ iwl_restore_stations(priv, ctx);
+ ret = iwl_restore_default_wep_keys(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+ return ret;
+ }
+
+ memcpy(active, &ctx->staging, sizeof(*active));
+ return 0;
+}
+
+static int iwlagn_rxon_connect(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret;
+ struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+ /* RXON timing must be before associated RXON */
+ ret = iwl_send_rxon_timing(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+ return ret;
+ }
+ /* QoS info may be cleared by previous un-assoc RXON */
+ iwlagn_update_qos(priv, ctx);
+
+ /*
+ * We'll run into this code path when beaconing is
+ * enabled, but then we also need to send the beacon
+ * to the device.
+ */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+ ret = iwlagn_update_beacon(priv, ctx->vif);
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending required beacon (%d)!\n",
+ ret);
+ return ret;
+ }
+ }
+
+ priv->start_calib = 0;
+ /*
+ * Apply the new configuration.
+ *
+ * Associated RXON doesn't clear the station table in uCode,
+ * so we don't need to restore stations etc. after this.
+ */
+ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+ sizeof(struct iwl_rxon_cmd), &ctx->staging);
+ if (ret) {
+ IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+ return ret;
+ }
+ memcpy(active, &ctx->staging, sizeof(*active));
+
+ iwl_reprogram_ap_sta(priv, ctx);
+
+ /* IBSS beacon needs to be sent after setting assoc */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+ if (iwlagn_update_beacon(priv, ctx->vif))
+ IWL_ERR(priv, "Error sending IBSS beacon\n");
+ iwl_init_sensitivity(priv);
+
+ /*
+ * If we issue a new RXON command which required a tune then
+ * we must send a new TXPOWER command or we won't be able to
+ * Tx any frames.
+ *
+ * It's expected we set power here if channel is changing.
+ */
+ ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
+ if (ret) {
+ IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
/**
* iwlagn_commit_rxon - commit staging_rxon to hardware
*
@@ -176,6 +273,16 @@ static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
* the active_rxon structure is updated with the new data. This
* function correctly transitions out of the RXON_ASSOC_MSK state if
* a HW tune is required based on the RXON structure changes.
+ *
+ * The connect/disconnect flow should be as the following:
+ *
+ * 1. make sure send RXON command with association bit unset if not connect
+ * this should include the channel and the band for the candidate
+ * to be connected to
+ * 2. Add Station before RXON association with the AP
+ * 3. RXON_timing has to send before RXON for connection
+ * 4. full RXON command - associated bit set
+ * 5. use RXON_ASSOC command to update any flags changes
*/
int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -225,6 +332,7 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
else
ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+ iwl_print_rx_config_cmd(priv, ctx);
ret = iwl_check_rxon_cmd(priv, ctx);
if (ret) {
IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
@@ -255,7 +363,6 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
}
memcpy(active, &ctx->staging, sizeof(*active));
- iwl_print_rx_config_cmd(priv, ctx);
return 0;
}
@@ -283,92 +390,13 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
* set up filters in the device.
*/
if ((old_assoc && new_assoc) || !new_assoc) {
- if (ctx->ctxid == IWL_RXON_CTX_BSS)
- ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
- else
- ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+ ret = iwlagn_rxon_disconn(priv, ctx);
if (ret)
return ret;
-
- memcpy(active, &ctx->staging, sizeof(*active));
-
- /*
- * Un-assoc RXON clears the station table and WEP
- * keys, so we have to restore those afterwards.
- */
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
}
- /* RXON timing must be before associated RXON */
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
- return ret;
- }
-
- if (new_assoc) {
- /* QoS info may be cleared by previous un-assoc RXON */
- iwlagn_update_qos(priv, ctx);
-
- /*
- * We'll run into this code path when beaconing is
- * enabled, but then we also need to send the beacon
- * to the device.
- */
- if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
- ret = iwlagn_update_beacon(priv, ctx->vif);
- if (ret) {
- IWL_ERR(priv,
- "Error sending required beacon (%d)!\n",
- ret);
- return ret;
- }
- }
-
- priv->start_calib = 0;
- /*
- * Apply the new configuration.
- *
- * Associated RXON doesn't clear the station table in uCode,
- * so we don't need to restore stations etc. after this.
- */
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- memcpy(active, &ctx->staging, sizeof(*active));
-
- iwl_reprogram_ap_sta(priv, ctx);
-
- /* IBSS beacon needs to be sent after setting assoc */
- if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
- if (iwlagn_update_beacon(priv, ctx->vif))
- IWL_ERR(priv, "Error sending IBSS beacon\n");
- }
-
- iwl_print_rx_config_cmd(priv, ctx);
-
- iwl_init_sensitivity(priv);
-
- /*
- * If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames.
- *
- * It's expected we set power here if channel is changing.
- */
- ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (ret) {
- IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
- return ret;
- }
+ if (new_assoc)
+ return iwlagn_rxon_connect(priv, ctx);
return 0;
}