Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 64 insertions, 63 deletions

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 7d1a3c6b6ce0..64dd345d30f5 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -35,6 +35,8 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
 
 #include "host.h"
 #include "decl.h"
@@ -313,12 +315,30 @@ out:
 	return ret;
 }
 
+static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition)
+{
+	u8 status;
+	unsigned long timeout;
+	int ret = 0;
+
+	timeout = jiffies + HZ;
+	while (1) {
+		status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
+		if (ret)
+			return ret;
+		if ((status & condition) == condition)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		mdelay(1);
+	}
+	return ret;
+}
+
 static int if_sdio_card_to_host(struct if_sdio_card *card)
 {
 	int ret;
-	u8 status;
 	u16 size, type, chunk;
-	unsigned long timeout;
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
@@ -333,19 +353,9 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
 		goto out;
 	}
 
-	timeout = jiffies + HZ;
-	while (1) {
-		status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-		if (ret)
-			goto out;
-		if (status & IF_SDIO_IO_RDY)
-			break;
-		if (time_after(jiffies, timeout)) {
-			ret = -ETIMEDOUT;
-			goto out;
-		}
-		mdelay(1);
-	}
+	ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+	if (ret)
+		goto out;
 
 	/*
 	 * The transfer must be in one transaction or the firmware
@@ -412,8 +422,6 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
 {
 	struct if_sdio_card *card;
 	struct if_sdio_packet *packet;
-	unsigned long timeout;
-	u8 status;
 	int ret;
 	unsigned long flags;
 
@@ -433,25 +441,15 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
 
 		sdio_claim_host(card->func);
 
-		timeout = jiffies + HZ;
-		while (1) {
-			status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-			if (ret)
-				goto release;
-			if (status & IF_SDIO_IO_RDY)
-				break;
-			if (time_after(jiffies, timeout)) {
-				ret = -ETIMEDOUT;
-				goto release;
-			}
-			mdelay(1);
+		ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+		if (ret == 0) {
+			ret = sdio_writesb(card->func, card->ioport,
+					   packet->buffer, packet->nb);
 		}
 
-		ret = sdio_writesb(card->func, card->ioport,
-				packet->buffer, packet->nb);
 		if (ret)
-			goto release;
-release:
+			lbs_pr_err("error %d sending packet to firmware\n", ret);
+
 		sdio_release_host(card->func);
 
 		kfree(packet);
@@ -464,10 +462,11 @@ release:
 /* Firmware                                                         */
 /********************************************************************/
 
+#define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
+
 static int if_sdio_prog_helper(struct if_sdio_card *card)
 {
 	int ret;
-	u8 status;
 	const struct firmware *fw;
 	unsigned long timeout;
 	u8 *chunk_buffer;
@@ -499,20 +498,14 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
 	size = fw->size;
 
 	while (size) {
-		timeout = jiffies + HZ;
-		while (1) {
-			status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-			if (ret)
-				goto release;
-			if ((status & IF_SDIO_IO_RDY) &&
-					(status & IF_SDIO_DL_RDY))
-				break;
-			if (time_after(jiffies, timeout)) {
-				ret = -ETIMEDOUT;
-				goto release;
-			}
-			mdelay(1);
-		}
+		ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+		if (ret)
+			goto release;
+
+		/* On some platforms (like Davinci) the chip needs more time
+		 * between helper blocks.
+		 */
+		mdelay(2);
 
 		chunk_size = min(size, (size_t)60);
 
@@ -582,7 +575,6 @@ out:
 static int if_sdio_prog_real(struct if_sdio_card *card)
 {
 	int ret;
-	u8 status;
 	const struct firmware *fw;
 	unsigned long timeout;
 	u8 *chunk_buffer;
@@ -614,20 +606,9 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
 	size = fw->size;
 
 	while (size) {
-		timeout = jiffies + HZ;
-		while (1) {
-			status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-			if (ret)
-				goto release;
-			if ((status & IF_SDIO_IO_RDY) &&
-					(status & IF_SDIO_DL_RDY))
-				break;
-			if (time_after(jiffies, timeout)) {
-				ret = -ETIMEDOUT;
-				goto release;
-			}
-			mdelay(1);
-		}
+		ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+		if (ret)
+			goto release;
 
 		req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
 		if (ret)
@@ -943,6 +924,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	int ret, i;
 	unsigned int model;
 	struct if_sdio_packet *packet;
+	struct mmc_host *host = func->card->host;
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
@@ -1023,6 +1005,25 @@ static int if_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto disable;
 
+	/* For 1-bit transfers to the 8686 model, we need to enable the
+	 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+	 * bit to allow access to non-vendor registers. */
+	if ((card->model == IF_SDIO_MODEL_8686) &&
+	    (host->caps & MMC_CAP_SDIO_IRQ) &&
+	    (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+		u8 reg;
+
+		func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+		reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto release_int;
+
+		reg |= SDIO_BUS_ECSI;
+		sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto release_int;
+	}
+
 	card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
 	if (ret)
 		goto release_int;