Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless

John W. Linville says:

====================
This is a big pull request for new features intended for the 3.10
stream...

Regarding mac80211, Johannes says:

"First, I merged mac80211/master to avoid some conflicts. This brings in
a bunch of fixes you're already familiar with. For real -next material,
I have a whole bunch of minstrel work, minstrel_ht from Felix and legacy
minstrel from Thomas (Huehn). The other Thomas (Pedersen) did a number
of changes in mesh to allow userspace peering management even when the
mesh isn't secured. Stanislaw changes suspend/resume to always
disconnect the networks. This is typically already done by
network-manager so won't make a huge difference for most users, but
fixes a number problems, particularly with USB drivers that can easily
disconnect while suspended. Ilan has a small change to allow mac80211
drivers to differentiate remain-on-channel reasons, and Jouni extends
nl80211 to allow fast roaming with full-MAC devices. I have a fairly
large number of patches as well, many of them fairly simple cleanups,
but also allowing split wiphy dumps and adding back the full wiphy
information in nl80211, station entry change checking and more VHT work
including VHT capability overrides (mostly for testing purposes)."

And for iwlwifi, Johannes says:

"Here, I also merged iwlwifi-fixes to avoid conflicts, and otherwise have
various cleanups and improvements on the MVM driver, along with a few
throughout the driver. Other than Bluetooth Coexistence from Emmanuel
there's no over-arching theme, so listing them would pretty much
reproduce the shortlog."

Regarding NFC, Samuel says:

"The 2 features we have with this one are:

- An LLCP Service Name Lookup (SNL) netlink interface for querying LLCP
  service availability from user space.
  Along the way, Thierry also improved the existing SNL interface for
  aggregating SNL responses.

- An initial LLCP socket options implementation, for setting the Receive
  Window (RW) and the Maximum Information Unit Extension (MIUX) per socket.
  This is need for the LLCP validation tests.

We also have a microread MEI build failure here: I am not sending this one to
3.9 because the MEI bus code is not there yet, so it won't break for anyone
else than me."

And for ath6kl, Kalle says:

"I added tracing support to ath6kl, along with a new Kconfig option. Now
there's also a workaround to reset USB devices when the firmware upload
fails, this happened when host was warm rebooted. There are also quite a
few small fixes or cleanup."

On top of all that, there is the usual bundle of driver updates
with new features, new hardware support and the like mixed-in.
The ath9k, b43, brcmfmac, mwifiex, rt2800, and wil6210 drivers
are all well-represented, and a few other drivers are hit as well.
I also pulled-in the wireless fixes tree in order to resolve some
pending merge conflicts.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 40 insertions, 32 deletions

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 25acb0682c56..57c5defe1f9d 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -230,40 +230,12 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 #define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14)))
 
-#define GET_VHTCAP_MAXMPDULEN(vht_cap_info) (vht_cap_info & 0x3)
 #define GET_VHTCAP_CHWDSET(vht_cap_info)    ((vht_cap_info >> 2) & 0x3)
 #define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
 #define SET_VHTNSSMCS(mcs_mapset, nss, value) (mcs_mapset |= (value & 0x3) << \
 					      (2 * (nss - 1)))
 #define NO_NSS_SUPPORT		0x3
 
-/* HW_SPEC: HTC-VHT supported */
-#define ISSUPP_11ACVHTHTCVHT(Dot11acDevCap) (Dot11acDevCap & BIT(22))
-/* HW_SPEC: VHT TXOP PS support */
-#define ISSUPP_11ACVHTTXOPPS(Dot11acDevCap) (Dot11acDevCap & BIT(21))
-/* HW_SPEC: MU RX beamformee support */
-#define ISSUPP_11ACMURXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(20))
-/* HW_SPEC: MU TX beamformee support */
-#define ISSUPP_11ACMUTXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(19))
-/* HW_SPEC: SU Beamformee support */
-#define ISSUPP_11ACSUBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(10))
-/* HW_SPEC: SU Beamformer support */
-#define ISSUPP_11ACSUBEAMFORMER(Dot11acDevCap) (Dot11acDevCap & BIT(9))
-/* HW_SPEC: Rx STBC support */
-#define ISSUPP_11ACRXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(8))
-/* HW_SPEC: Tx STBC support */
-#define ISSUPP_11ACTXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(7))
-/* HW_SPEC: Short GI support for 160MHz BW */
-#define ISSUPP_11ACSGI160(Dot11acDevCap) (Dot11acDevCap & BIT(6))
-/* HW_SPEC: Short GI support for 80MHz BW */
-#define ISSUPP_11ACSGI80(Dot11acDevCap) (Dot11acDevCap & BIT(5))
-/* HW_SPEC: LDPC coding support */
-#define ISSUPP_11ACLDPC(Dot11acDevCap) (Dot11acDevCap & BIT(4))
-/* HW_SPEC: Channel BW 20/40/80/160/80+80 MHz support */
-#define ISSUPP_11ACBW8080(Dot11acDevCap) (Dot11acDevCap & BIT(3))
-/* HW_SPEC: Channel BW 20/40/80/160 MHz support */
-#define ISSUPP_11ACBW160(Dot11acDevCap) (Dot11acDevCap & BIT(2))
-
 #define GET_DEVTXMCSMAP(dev_mcs_map)      (dev_mcs_map >> 16)
 #define GET_DEVRXMCSMAP(dev_mcs_map)      (dev_mcs_map & 0xFFFF)
 
@@ -300,6 +272,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_802_11_TX_RATE_QUERY              0x007f
 #define HostCmd_CMD_802_11_IBSS_COALESCING_STATUS     0x0083
 #define HostCmd_CMD_VERSION_EXT                       0x0097
+#define HostCmd_CMD_MEF_CFG                           0x009a
 #define HostCmd_CMD_RSSI_INFO                         0x00a4
 #define HostCmd_CMD_FUNC_INIT                         0x00a9
 #define HostCmd_CMD_FUNC_SHUTDOWN                     0x00aa
@@ -376,10 +349,14 @@ enum P2P_MODES {
 #define HostCmd_SCAN_RADIO_TYPE_BG          0
 #define HostCmd_SCAN_RADIO_TYPE_A           1
 
-#define HOST_SLEEP_CFG_CANCEL		0xffffffff
-#define HOST_SLEEP_CFG_COND_DEF		0x00000000
-#define HOST_SLEEP_CFG_GPIO_DEF		0xff
-#define HOST_SLEEP_CFG_GAP_DEF		0
+#define HS_CFG_CANCEL			0xffffffff
+#define HS_CFG_COND_DEF			0x00000000
+#define HS_CFG_GPIO_DEF			0xff
+#define HS_CFG_GAP_DEF			0
+#define HS_CFG_COND_BROADCAST_DATA	0x00000001
+#define HS_CFG_COND_UNICAST_DATA	0x00000002
+#define HS_CFG_COND_MAC_EVENT		0x00000004
+#define HS_CFG_COND_MULTICAST_DATA	0x00000008
 
 #define MWIFIEX_TIMEOUT_FOR_AP_RESP		0xfffc
 #define MWIFIEX_STATUS_CODE_AUTH_TIMEOUT	2
@@ -469,6 +446,23 @@ enum P2P_MODES {
 #define EVENT_GET_BSS_TYPE(event_cause)         \
 	(((event_cause) >> 24) & 0x00ff)
 
+#define MWIFIEX_MAX_PATTERN_LEN		20
+#define MWIFIEX_MAX_OFFSET_LEN		50
+#define STACK_NBYTES			100
+#define TYPE_DNUM			1
+#define TYPE_BYTESEQ			2
+#define MAX_OPERAND			0x40
+#define TYPE_EQ				(MAX_OPERAND+1)
+#define TYPE_EQ_DNUM			(MAX_OPERAND+2)
+#define TYPE_EQ_BIT			(MAX_OPERAND+3)
+#define TYPE_AND			(MAX_OPERAND+4)
+#define TYPE_OR				(MAX_OPERAND+5)
+#define MEF_MODE_HOST_SLEEP			1
+#define MEF_ACTION_ALLOW_AND_WAKEUP_HOST	3
+#define MWIFIEX_CRITERIA_BROADCAST	BIT(0)
+#define MWIFIEX_CRITERIA_UNICAST	BIT(1)
+#define MWIFIEX_CRITERIA_MULTICAST	BIT(3)
+
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
@@ -1499,6 +1493,19 @@ struct host_cmd_ds_802_11_ibss_status {
 	__le16 use_g_rate_protect;
 } __packed;
 
+struct mwifiex_fw_mef_entry {
+	u8 mode;
+	u8 action;
+	__le16 exprsize;
+	u8 expr[0];
+} __packed;
+
+struct host_cmd_ds_mef_cfg {
+	__le32 criteria;
+	__le16 num_entries;
+	struct mwifiex_fw_mef_entry mef_entry[0];
+} __packed;
+
 #define CONNECTION_TYPE_INFRA   0
 #define CONNECTION_TYPE_ADHOC   1
 #define CONNECTION_TYPE_AP      2
@@ -1603,6 +1610,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_remain_on_chan roc_cfg;
 		struct host_cmd_ds_p2p_mode_cfg mode_cfg;
 		struct host_cmd_ds_802_11_ibss_status ibss_coalescing;
+		struct host_cmd_ds_mef_cfg mef_cfg;
 		struct host_cmd_ds_mac_reg_access mac_reg;
 		struct host_cmd_ds_bbp_reg_access bbp_reg;
 		struct host_cmd_ds_rf_reg_access rf_reg;