Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits)
  b44: GFP_DMA skb should not escape from driver
  korina: do not use IRQF_SHARED with IRQF_DISABLED
  korina: do not stop queue here
  korina: fix handling tx_chain_tail
  korina: do tx at the right position
  korina: do schedule napi after testing for it
  korina: rework korina_rx() for use with napi
  korina: disable napi on close and restart
  korina: reset resource buffer size to 1536
  korina: fix usage of driver_data
  bnx2x: First slow path interrupt race
  bnx2x: MTU Filter
  bnx2x: Indirection table initialization index
  bnx2x: Missing brackets
  bnx2x: Fixing the doorbell size
  bnx2x: Endianness issues
  bnx2x: VLAN tagged packets without VLAN offload
  bnx2x: Protecting the link change indication
  bnx2x: Flow control updated before reporting the link
  bnx2x: Missing mask when calculating flow control
  ...

1 files changed, 8 insertions, 15 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 30028e2422fc..af6b5847be5c 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -38,7 +38,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -376,11 +376,11 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The driver does not support the IV/EIV generation
-		 * in hardware. However it doesn't support the IV/EIV
-		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
-		 * rt2x00lib will cut the IV/EIV data out of all frames
-		 * given to us by mac80211, but we must tell mac80211
+		 * in hardware. However it demands the data to be provided
+		 * both seperately as well as inside the frame.
+		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+		 * to ensure rt2x00lib will not strip the data from the
+		 * frame after the copy, now we must tell mac80211
 		 * to generate the IV/EIV data.
 		 */
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
@@ -1181,7 +1181,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 			   test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
-	rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+	rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
 	rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
 	rt2x00_desc_write(txd, 0, word);
 }
@@ -1334,14 +1334,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
 
 		/* ICV is located at the end of frame */
 
-		/*
-		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
-		 * should decide if it should be reinserted.
-		 */
-		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-		if (rxdesc->cipher != CIPHER_TKIP)
-			rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 			rxdesc->flags |= RX_FLAG_DECRYPTED;
 		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)