diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-18 18:02:35 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-18 18:02:35 -0700 |
commit | 334d094504c2fe1c44211ecb49146ae6bca8c321 (patch) | |
tree | d3c0f68e4b9f8e3d2ccc39e7dfe5de0534a5fad9 /drivers/net/wireless/rt2x00/rt61pci.c | |
parent | d1a4be630fb068f251d64b62919f143c49ca8057 (diff) | |
parent | d1643d24c61b725bef399cc1cf2944b4c9c23177 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
[NET]: Fix and allocate less memory for ->priv'less netdevices
[IPV6]: Fix dangling references on error in fib6_add().
[NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
[PKT_SCHED]: Fix datalen check in tcf_simp_init().
[INET]: Uninline the __inet_inherit_port call.
[INET]: Drop the inet_inherit_port() call.
SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
[netdrvr] forcedeth: internal simplifications; changelog removal
phylib: factor out get_phy_id from within get_phy_device
PHY: add BCM5464 support to broadcom PHY driver
cxgb3: Fix __must_check warning with dev_dbg.
tc35815: Statistics cleanup
natsemi: fix MMIO for PPC 44x platforms
[TIPC]: Cleanup of TIPC reference table code
[TIPC]: Optimized initialization of TIPC reference table
[TIPC]: Remove inlining of reference table locking routines
e1000: convert uint16_t style integers to u16
ixgb: convert uint16_t style integers to u16
sb1000.c: make const arrays static
sb1000.c: stop inlining largish static functions
...
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 829 |
1 files changed, 425 insertions, 404 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ad2e7d53b3da..468a31c8c113 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -24,6 +24,7 @@ Supported chipsets: RT2561, RT2561s, RT2661. */ +#include <linux/crc-itu-t.h> #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/init.h> @@ -155,6 +156,12 @@ rf_write: rt2x00_rf_write(rt2x00dev, word, value); } +#ifdef CONFIG_RT61PCI_LEDS +/* + * This function is only called from rt61pci_led_brightness() + * make gcc happy by placing this function inside the + * same ifdef statement as the caller. + */ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -181,6 +188,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } +#endif /* CONFIG_RT61PCI_LEDS */ static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -262,82 +270,162 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) u32 reg; rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_BIT5);; + return rt2x00_get_field32(reg, MAC_CSR13_BIT5); } #else #define rt61pci_rfkill_poll NULL #endif /* CONFIG_RT61PCI_RFKILL */ -/* - * Configuration handlers. - */ -static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) +#ifdef CONFIG_RT61PCI_LEDS +static void rt61pci_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int a_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + + if (led->type == LED_TYPE_RADIO) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_RADIO_STATUS, enabled); + + rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, + (led->rt2x00dev->led_mcu_reg & 0xff), + ((led->rt2x00dev->led_mcu_reg >> 8))); + } else if (led->type == LED_TYPE_ASSOC) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_BG_STATUS, bg_mode); + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_A_STATUS, a_mode); + + rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, + (led->rt2x00dev->led_mcu_reg & 0xff), + ((led->rt2x00dev->led_mcu_reg >> 8))); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * this means we need to convert the brightness + * argument into the matching level within that range. + */ + rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + brightness / (LED_FULL / 6), 0); + } } -static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) +static int rt61pci_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - u32 tmp; + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); + rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); + rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg); - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); + return 0; } +#endif /* CONFIG_RT61PCI_LEDS */ -static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); +} - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); +static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); + conf->bssid[1] = cpu_to_le32(reg); + + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, + conf->bssid, sizeof(conf->bssid)); + } } -static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) { u32 reg; rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); + !!erp->short_preamble); rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); } @@ -427,27 +515,21 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - (rt2x00dev->curr_hwmode != HWMODE_A)); + (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ)); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); @@ -486,14 +568,8 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); break; @@ -531,10 +607,6 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, rt61pci_bbp_read(rt2x00dev, 4, &r4); rt61pci_bbp_read(rt2x00dev, 77, &r77); - /* FIXME: Antenna selection for the rf 2529 is very confusing in the - * legacy driver. The code below should be ok for non-diversity setups. - */ - /* * Configure the RX antenna. */ @@ -544,15 +616,14 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); break; - case ANTENNA_SW_DIVERSITY: case ANTENNA_HW_DIVERSITY: /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. + * FIXME: Antenna selection for the rf 2529 is very confusing + * in the legacy driver. Just default to antenna B until the + * legacy code can be properly translated into rt2x00 code. */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); @@ -603,7 +674,14 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, unsigned int i; u32 reg; - if (rt2x00dev->curr_hwmode == HWMODE_A) { + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); } else { @@ -617,10 +695,9 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_hwmode == HWMODE_B || - rt2x00dev->curr_hwmode == HWMODE_G)); + rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_hwmode == HWMODE_A)); + rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); @@ -667,8 +744,8 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt61pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); @@ -684,78 +761,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u8 arg0; - u8 arg1; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, - (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, - (rt2x00dev->rx_status.phymode != MODE_IEEE80211A)); - - arg0 = rt2x00dev->led_reg & 0xff; - arg1 = (rt2x00dev->led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 led_reg; - u8 arg0; - u8 arg1; - - led_reg = rt2x00dev->led_reg; - rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - arg0 = led_reg & 0xff; - arg1 = (led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u8 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0); -} - -/* * Link tuning */ static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev, @@ -789,17 +794,12 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) u8 up_bound; u8 low_bound; - /* - * Update Led strength - */ - rt61pci_activity_led(rt2x00dev, rssi); - rt61pci_bbp_read(rt2x00dev, 17, &r17); /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { @@ -816,6 +816,13 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Special big-R17 for very short distance */ if (rssi >= -35) { @@ -866,6 +873,8 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) return; } +dynamic_cca_tune: + /* * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. @@ -882,7 +891,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) } /* - * Firmware name function. + * Firmware functions */ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) { @@ -906,9 +915,23 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) return fw_name; } -/* - * Initialization functions. - */ +static u16 rt61pci_get_firmware_crc(void *data, const size_t len) +{ + u16 crc; + + /* + * Use the crc itu-t algorithm. + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + crc = crc_itu_t(0, data, len - 2); + crc = crc_itu_t_byte(crc, 0); + crc = crc_itu_t_byte(crc, 0); + + return crc; +} + static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, const size_t len) { @@ -989,50 +1012,55 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, return 0; } +/* + * Initialization functions. + */ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word; - rt2x00_desc_read(rxd, 5, &word); + rt2x00_desc_read(priv_rx->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - entry->data_dma); - rt2x00_desc_write(rxd, 5, word); + priv_rx->data_dma); + rt2x00_desc_write(priv_rx->desc, 5, word); - rt2x00_desc_read(rxd, 0, &word); + rt2x00_desc_read(priv_rx->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); + rt2x00_desc_write(priv_rx->desc, 0, word); } static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *txd = entry->priv; + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; u32 word; - rt2x00_desc_read(txd, 1, &word); + rt2x00_desc_read(priv_tx->desc, 1, &word); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(txd, 1, word); + rt2x00_desc_write(priv_tx->desc, 1, word); - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->ring->queue_idx); + rt2x00_desc_read(priv_tx->desc, 5, &word); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx); - rt2x00_desc_write(txd, 5, word); + rt2x00_desc_write(priv_tx->desc, 5, word); - rt2x00_desc_read(txd, 6, &word); + rt2x00_desc_read(priv_tx->desc, 6, &word); rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - entry->data_dma); - rt2x00_desc_write(txd, 6, word); + priv_tx->data_dma); + rt2x00_desc_write(priv_tx->desc, 6, word); - rt2x00_desc_read(txd, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); + rt2x00_desc_write(priv_tx->desc, 0, word); } -static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) +static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) { + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; u32 reg; /* @@ -1040,59 +1068,55 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) */ rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00dev->tx[0].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); + rt2x00dev->tx[1].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit); + rt2x00dev->tx[2].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit); + rt2x00dev->tx[3].limit); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); - rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit); rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size / - 4); + rt2x00dev->tx[0].desc_size / 4); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); + priv_tx = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[2].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[3].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); - rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®); - rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma); - rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg); - rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); - rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, - rt2x00dev->rx->stats.limit); + rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit); rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, rt2x00dev->rx->desc_size / 4); rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); + priv_rx = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - rt2x00dev->rx->data_dma); + priv_rx->desc_dma); rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); @@ -1100,7 +1124,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0); rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); @@ -1108,7 +1131,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1); rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); @@ -1224,6 +1246,17 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -1296,19 +1329,15 @@ continue_csr_init: rt61pci_bbp_write(rt2x00dev, 102, 0x16); rt61pci_bbp_write(rt2x00dev, 107, 0x04); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt61pci_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -1375,7 +1404,7 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt61pci_init_rings(rt2x00dev) || + if (rt61pci_init_queues(rt2x00dev) || rt61pci_init_registers(rt2x00dev) || rt61pci_init_bbp(rt2x00dev)) { ERROR(rt2x00dev, "Register initialization failed.\n"); @@ -1394,11 +1423,6 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); - /* - * Enable LED - */ - rt61pci_enable_led(rt2x00dev); - return 0; } @@ -1406,11 +1430,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - /* - * Disable LED - */ - rt61pci_disable_led(rt2x00dev); - rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* @@ -1426,7 +1445,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); /* @@ -1508,10 +1526,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1519,50 +1537,52 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); + TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); - rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); - rt2x00_desc_write(txd, 11, word); + if (skbdesc->desc_len > TXINFO_SIZE) { + rt2x00_desc_read(txd, 11, &word); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); + rt2x00_desc_write(txd, 11, word); + } rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1571,11 +1591,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue == IEEE80211_TX_QUEUE_BEACON) { + if (queue == RT2X00_BCN_QUEUE_BEACON) { /* * For Wi-Fi faily generated beacons between participating * stations. Set TBTT phase adaptive adjustment step to 8us. @@ -1584,6 +1604,8 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); } @@ -1599,8 +1621,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, (queue == IEEE80211_TX_QUEUE_DATA2)); rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == IEEE80211_TX_QUEUE_DATA3)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, - (queue == IEEE80211_TX_QUEUE_DATA4)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -1628,7 +1648,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) offset += 14; @@ -1648,28 +1668,35 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; } -static void rt61pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt61pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word0; u32 word1; - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); + rt2x00_desc_read(priv_rx->desc, 0, &word0); + rt2x00_desc_read(priv_rx->desc, 1, &word1); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; /* * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. + */ + rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; } /* @@ -1677,17 +1704,16 @@ static void rt61pci_fill_rxdone(struct data_entry *entry, */ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; - struct data_entry *entry; - struct data_entry *entry_done; - __le32 *txd; + struct data_queue *queue; + struct queue_entry *entry; + struct queue_entry *entry_done; + struct queue_entry_priv_pci_tx *priv_tx; + struct txdone_entry_desc txdesc; u32 word; u32 reg; u32 old_reg; int type; int index; - int tx_status; - int retry; /* * During each loop we will compare the freshly read @@ -1710,11 +1736,11 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) /* * Skip this entry when it contains an invalid - * ring identication number. + * queue identication number. */ type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); - ring = rt2x00lib_get_ring(rt2x00dev, type); - if (unlikely(!ring)) + queue = rt2x00queue_get_queue(rt2x00dev, type); + if (unlikely(!queue)) continue; /* @@ -1722,36 +1748,40 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) * index number. */ index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); - if (unlikely(index >= ring->stats.limit)) + if (unlikely(index >= queue->limit)) continue; - entry = &ring->entry[index]; - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); + entry = &queue->entries[index]; + priv_tx = entry->priv_data; + rt2x00_desc_read(priv_tx->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) return; - entry_done = rt2x00_get_data_entry_done(ring); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); while (entry != entry_done) { - /* Catch up. Just report any entries we missed as - * failed. */ + /* Catch up. + * Just report any entries we missed as failed. + */ WARNING(rt2x00dev, - "TX status report missed for entry %p\n", - entry_done); - rt2x00pci_txdone(rt2x00dev, entry_done, TX_FAIL_OTHER, - 0); - entry_done = rt2x00_get_data_entry_done(ring); + "TX status report missed for entry %d\n", + entry_done->entry_idx); + + txdesc.status = TX_FAIL_OTHER; + txdesc.retry = 0; + + rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } /* * Obtain the status about this packet. */ - tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); - retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); + txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); + txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry); + rt2x00pci_txdone(rt2x00dev, entry, &txdesc); } } @@ -1906,7 +1936,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); } else { value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); if (value < -10 || value > 10) @@ -2035,35 +2065,61 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * If the eeprom value is invalid, * switch to default led mode. */ +#ifdef CONFIG_RT61PCI_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); + + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; + rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; + rt2x00dev->led_assoc.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_assoc.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_assoc.flags = LED_INITIALIZED; + + if (value == LED_MODE_SIGNAL_STRENGTH) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } - rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); +#endif /* CONFIG_RT61PCI_LEDS */ return 0; } @@ -2197,7 +2253,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = 0; rt2x00dev->hw->max_signal = MAX_SIGNAL; rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; + rt2x00dev->hw->queues = 4; SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2214,8 +2270,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -2230,7 +2286,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF5325)) { - spec->num_modes = 3; + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_seq); txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); @@ -2262,7 +2318,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt61pci_probe_hw_mode(rt2x00dev); /* - * This device requires firmware + * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); @@ -2277,70 +2333,6 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt61pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Multicast filter seems to kill broadcast traffic so never use it. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); -} - static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -2369,66 +2361,72 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static void rt61pci_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0); -} - static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *entry; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct skb_frame_desc *skbdesc; + unsigned int beacon_base; + u32 reg; - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - entry = rt2x00_get_data_entry(ring); + if (unlikely(!intf->beacon)) + return -ENOBUFS; /* * We need to append the descriptor in front of the * beacon frame. */ - if (skb_headroom(skb) < TXD_DESC_SIZE) { - if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) + if (skb_headroom(skb) < intf->beacon->queue->desc_size) { + if (pskb_expand_head(skb, intf->beacon->queue->desc_size, + 0, GFP_ATOMIC)) return -ENOMEM; } /* * Add the descriptor in front of the skb. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = entry; + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, skb->data, skb->len); - rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt61pci_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -2441,14 +2439,13 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt61pci_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, - .reset_tsf = rt61pci_reset_tsf, .beacon_update = rt61pci_beacon_update, }; @@ -2456,6 +2453,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .irq_handler = rt61pci_interrupt, .probe_hw = rt61pci_probe_hw, .get_firmware_name = rt61pci_get_firmware_name, + .get_firmware_crc = rt61pci_get_firmware_crc, .load_firmware = rt61pci_load_firmware, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, @@ -2470,19 +2468,42 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, - .config_mac_addr = rt61pci_config_mac_addr, - .config_bssid = rt61pci_config_bssid, - .config_type = rt61pci_config_type, - .config_preamble = rt61pci_config_preamble, + .config_filter = rt61pci_config_filter, + .config_intf = rt61pci_config_intf, + .config_erp = rt61pci_config_erp, .config = rt61pci_config, }; +static const struct data_queue_desc rt61pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_rx), +}; + +static const struct data_queue_desc rt61pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt61pci_queue_bcn = { + .entry_num = 4 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXINFO_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + static const struct rt2x00_ops rt61pci_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt61pci_queue_rx, + .tx = &rt61pci_queue_tx, + .bcn = &rt61pci_queue_bcn, .lib = &rt61pci_rt2x00_ops, .hw = &rt61pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS |