Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

12 files changed, 321 insertions, 401 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 91cbd9e560bd..4c0538d6099b 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1069,6 +1069,40 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
+static void rt2400pci_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u32 word;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
+	/*
+	 * Replace rt2x00lib allocated descriptor with the
+	 * pointer to the _real_ hardware descriptor.
+	 * After that, map the beacon to DMA and update the
+	 * descriptor.
+	 */
+	memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry_priv->desc;
+
+	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
+
+	rt2x00_desc_read(entry_priv->desc, 1, &word);
+	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
+	rt2x00_desc_write(entry_priv->desc, 1, word);
+}
+
 static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				    const enum data_queue_qid queue)
 {
@@ -1515,59 +1549,6 @@ static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
 	return tsf;
 }
 
-static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
-	struct queue_entry_priv_pci *entry_priv;
-	struct skb_frame_desc *skbdesc;
-	struct txentry_desc txdesc;
-	u32 reg;
-
-	if (unlikely(!intf->beacon))
-		return -ENOBUFS;
-	entry_priv = intf->beacon->priv_data;
-
-	/*
-	 * Copy all TX descriptor information into txdesc,
-	 * after that we are free to use the skb->cb array
-	 * for our information.
-	 */
-	intf->beacon->skb = skb;
-	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->desc = entry_priv->desc;
-	skbdesc->desc_len = intf->beacon->queue->desc_size;
-	skbdesc->entry = intf->beacon;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
-	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
-	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
-	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
-
-	/*
-	 * Enable beacon generation.
-	 * Write entire beacon with descriptor to register,
-	 * and kick the beacon generator.
-	 */
-	rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb);
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
-
-	return 0;
-}
-
 static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -1592,7 +1573,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.conf_tx		= rt2400pci_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2400pci_get_tsf,
-	.beacon_update		= rt2400pci_beacon_update,
 	.tx_last_beacon		= rt2400pci_tx_last_beacon,
 };
 
@@ -1610,6 +1590,7 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 	.link_tuner		= rt2400pci_link_tuner,
 	.write_tx_desc		= rt2400pci_write_tx_desc,
 	.write_tx_data		= rt2x00pci_write_tx_data,
+	.write_beacon		= rt2400pci_write_beacon,
 	.kick_tx_queue		= rt2400pci_kick_tx_queue,
 	.fill_rxdone		= rt2400pci_fill_rxdone,
 	.config_filter		= rt2400pci_config_filter,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 0f2a0e22fd71..aa6dfb811c71 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1227,6 +1227,40 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
+static void rt2500pci_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u32 word;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
+	/*
+	 * Replace rt2x00lib allocated descriptor with the
+	 * pointer to the _real_ hardware descriptor.
+	 * After that, map the beacon to DMA and update the
+	 * descriptor.
+	 */
+	memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry_priv->desc;
+
+	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
+
+	rt2x00_desc_read(entry_priv->desc, 1, &word);
+	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
+	rt2x00_desc_write(entry_priv->desc, 1, word);
+}
+
 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				    const enum data_queue_qid queue)
 {
@@ -1808,60 +1842,6 @@ static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
 	return tsf;
 }
 
-static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
-	struct queue_entry_priv_pci *entry_priv;
-	struct skb_frame_desc *skbdesc;
-	struct txentry_desc txdesc;
-	u32 reg;
-
-	if (unlikely(!intf->beacon))
-		return -ENOBUFS;
-
-	entry_priv = intf->beacon->priv_data;
-
-	/*
-	 * Copy all TX descriptor information into txdesc,
-	 * after that we are free to use the skb->cb array
-	 * for our information.
-	 */
-	intf->beacon->skb = skb;
-	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->desc = entry_priv->desc;
-	skbdesc->desc_len = intf->beacon->queue->desc_size;
-	skbdesc->entry = intf->beacon;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
-	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
-	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
-	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
-
-	/*
-	 * Enable beacon generation.
-	 * Write entire beacon with descriptor to register,
-	 * and kick the beacon generator.
-	 */
-	rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb);
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
-
-	return 0;
-}
-
 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -1886,7 +1866,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2500pci_get_tsf,
-	.beacon_update		= rt2500pci_beacon_update,
 	.tx_last_beacon		= rt2500pci_tx_last_beacon,
 };
 
@@ -1904,6 +1883,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.link_tuner		= rt2500pci_link_tuner,
 	.write_tx_desc		= rt2500pci_write_tx_desc,
 	.write_tx_data		= rt2x00pci_write_tx_data,
+	.write_beacon		= rt2500pci_write_beacon,
 	.kick_tx_queue		= rt2500pci_kick_tx_queue,
 	.fill_rxdone		= rt2500pci_fill_rxdone,
 	.config_filter		= rt2500pci_config_filter,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 367db10b96d9..3558cb210747 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1107,6 +1107,65 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_desc_write(txd, 0, word);
 }
 
+/*
+ * TX data initialization
+ */
+static void rt2500usb_beacondone(struct urb *urb);
+
+static void rt2500usb_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+	struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	int pipe = usb_sndbulkpipe(usb_dev, 1);
+	int length;
+	u16 reg;
+
+	/*
+	 * Add the descriptor in front of the skb.
+	 */
+	skb_push(entry->skb, entry->queue->desc_size);
+	memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry->skb->data;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
+	/*
+	 * USB devices cannot blindly pass the skb->len as the
+	 * length of the data to usb_fill_bulk_urb. Pass the skb
+	 * to the driver to determine what the length should be.
+	 */
+	length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb);
+
+	usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
+			  entry->skb->data, length, rt2500usb_beacondone,
+			  entry);
+
+	/*
+	 * Second we need to create the guardian byte.
+	 * We only need a single byte, so lets recycle
+	 * the 'flags' field we are not using for beacons.
+	 */
+	bcn_priv->guardian_data = 0;
+	usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
+			  &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
+			  entry);
+
+	/*
+	 * Send out the guardian byte.
+	 */
+	usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
+}
+
 static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
 				     struct sk_buff *skb)
 {
@@ -1122,9 +1181,6 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
 	return length;
 }
 
-/*
- * TX data initialization
- */
 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				    const enum data_queue_qid queue)
 {
@@ -1679,96 +1735,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
-/*
- * IEEE80211 stack callback functions.
- */
-static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
-	struct queue_entry_priv_usb_bcn *bcn_priv;
-	struct skb_frame_desc *skbdesc;
-	struct txentry_desc txdesc;
-	int pipe = usb_sndbulkpipe(usb_dev, 1);
-	int length;
-	u16 reg;
-
-	if (unlikely(!intf->beacon))
-		return -ENOBUFS;
-
-	bcn_priv = intf->beacon->priv_data;
-
-	/*
-	 * Copy all TX descriptor information into txdesc,
-	 * after that we are free to use the skb->cb array
-	 * for our information.
-	 */
-	intf->beacon->skb = skb;
-	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
-	 * Add the descriptor in front of the skb.
-	 */
-	skb_push(skb, intf->beacon->queue->desc_size);
-	memset(skb->data, 0, intf->beacon->queue->desc_size);
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->desc = skb->data;
-	skbdesc->desc_len = intf->beacon->queue->desc_size;
-	skbdesc->entry = intf->beacon;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
-	rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
-	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
-	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
-	 * USB devices cannot blindly pass the skb->len as the
-	 * length of the data to usb_fill_bulk_urb. Pass the skb
-	 * to the driver to determine what the length should be.
-	 */
-	length = rt2500usb_get_tx_data_len(rt2x00dev, skb);
-
-	usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
-			  skb->data, length, rt2500usb_beacondone,
-			  intf->beacon);
-
-	/*
-	 * Second we need to create the guardian byte.
-	 * We only need a single byte, so lets recycle
-	 * the 'flags' field we are not using for beacons.
-	 */
-	bcn_priv->guardian_data = 0;
-	usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
-			  &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
-			  intf->beacon);
-
-	/*
-	 * Send out the guardian byte.
-	 */
-	usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
-
-	/*
-	 * Enable beacon generation.
-	 */
-	rt2500usb_kick_tx_queue(rt2x00dev, QID_BEACON);
-
-	return 0;
-}
-
 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.tx			= rt2x00mac_tx,
 	.start			= rt2x00mac_start,
@@ -1782,7 +1748,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
-	.beacon_update		= rt2500usb_beacon_update,
 };
 
 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
@@ -1797,6 +1762,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 	.link_tuner		= rt2500usb_link_tuner,
 	.write_tx_desc		= rt2500usb_write_tx_desc,
 	.write_tx_data		= rt2x00usb_write_tx_data,
+	.write_beacon		= rt2500usb_write_beacon,
 	.get_tx_data_len	= rt2500usb_get_tx_data_len,
 	.kick_tx_queue		= rt2500usb_kick_tx_queue,
 	.fill_rxdone		= rt2500usb_fill_rxdone,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index c07d9ef383f0..9fab0df18c3c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -364,6 +364,8 @@ struct rt2x00_intf {
 #define DELAYED_UPDATE_BEACON		0x00000001
 #define DELAYED_CONFIG_ERP		0x00000002
 #define DELAYED_LED_ASSOC		0x00000004
+
+	u16 seqno;
 };
 
 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
@@ -434,6 +436,7 @@ struct rt2x00lib_conf {
  */
 struct rt2x00lib_erp {
 	int short_preamble;
+	int cts_protection;
 
 	int ack_timeout;
 	int ack_consume_time;
@@ -520,6 +523,7 @@ struct rt2x00lib_ops {
 			       struct sk_buff *skb,
 			       struct txentry_desc *txdesc);
 	int (*write_tx_data) (struct queue_entry *entry);
+	void (*write_beacon) (struct queue_entry *entry);
 	int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
 				struct sk_buff *skb);
 	void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
@@ -910,39 +914,6 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate)
 void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
- * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input
- * @entry: The entry which will be used to transfer the TX frame.
- * @txdesc: rt2x00 TX descriptor which will be initialized by this function.
- *
- * This function will initialize the &struct txentry_desc based on information
- * from mac80211. This descriptor can then be used by rt2x00lib and the drivers
- * to correctly initialize the hardware descriptor.
- * Note that before calling this function the skb->cb array must be untouched
- * by rt2x00lib. Only after this function completes will it be save to
- * overwrite the skb->cb information.
- * The reason for this is that mac80211 writes its own tx information into
- * the skb->cb array, and this function will use that information to initialize
- * the &struct txentry_desc structure.
- */
-void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
-				      struct txentry_desc *txdesc);
-
-/**
- * rt2x00queue_write_tx_descriptor - Write TX descriptor to hardware
- * @entry: The entry which will be used to transfer the TX frame.
- * @txdesc: TX descriptor which will be used to write hardware descriptor
- *
- * This function will write a TX descriptor initialized by
- * &rt2x00queue_create_tx_descriptor to the hardware. After this call
- * has completed the frame is now owned by the hardware, the hardware
- * queue will have automatically be kicked unless this frame was generated
- * by rt2x00lib, in which case the frame is "special" and must be kicked
- * by the caller.
- */
-void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
-				     struct txentry_desc *txdesc);
-
-/**
  * rt2x00queue_get_queue - Convert queue index to queue pointer
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  * @queue: rt2x00 queue index (see &enum data_queue_qid).
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 48608e8cc8b4..f20ca712504f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -84,6 +84,8 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 	memset(&erp, 0, sizeof(erp));
 
 	erp.short_preamble = bss_conf->use_short_preamble;
+	erp.cts_protection = bss_conf->use_cts_prot;
+
 	erp.ack_timeout = PLCP + get_duration(ACK_SIZE, 10);
 	erp.ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b48c04e80a38..8c93eb8353b0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -409,7 +409,6 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 {
 	struct rt2x00_dev *rt2x00dev = data;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
-	struct sk_buff *skb;
 	struct ieee80211_bss_conf conf;
 	int delayed_flags;
 
@@ -435,12 +434,8 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
-	if (delayed_flags & DELAYED_UPDATE_BEACON) {
-		skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
-		if (skb &&
-		    rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb))
-			dev_kfree_skb(skb);
-	}
+	if (delayed_flags & DELAYED_UPDATE_BEACON)
+		rt2x00queue_update_beacon(rt2x00dev, vif);
 
 	if (delayed_flags & DELAYED_CONFIG_ERP)
 		rt2x00lib_config_erp(rt2x00dev, intf, &conf);
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index b971bc6e7ee2..bab05a56e7a0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -100,6 +100,14 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
 	retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev,
 						    rt2x00dev->fw->data,
 						    rt2x00dev->fw->size);
+
+	/*
+	 * When the firmware is uploaded to the hardware the LED
+	 * association status might have been triggered, for correct
+	 * LED handling it should now be reset.
+	 */
+	rt2x00leds_led_assoc(rt2x00dev, false);
+
 	return retval;
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index eae5ce1d4de3..f2c9b0e79b5f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -139,6 +139,14 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
 
 /**
+ * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @vif: Interface for which the beacon should be updated.
+ */
+int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
+			      struct ieee80211_vif *vif);
+
+/**
  * rt2x00queue_index_inc - Index incrementation function
  * @queue: Queue (&struct data_queue) to perform the action on.
  * @index: Index type (&enum queue_index) to perform the action on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 3a1fb6d47e5d..77af1df5d899 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -96,6 +96,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
+	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct data_queue *queue;
 	u16 frame_control;
 
@@ -151,6 +152,18 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		}
 	}
 
+	/*
+	 * XXX: This is as wrong as the old mac80211 code was,
+	 *	due to beacons not getting sequence numbers assigned
+	 *	properly.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			intf->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+	}
+
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 		return NETDEV_TX_BUSY;
@@ -348,7 +361,8 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int status;
+	int update_bssid = 0;
+	int status = 0;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -360,12 +374,13 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	spin_lock(&intf->lock);
 
 	/*
-	 * If the interface does not work in master mode,
-	 * then the bssid value in the interface structure
-	 * should now be set.
+	 * conf->bssid can be NULL if coming from the internal
+	 * beacon update routine.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_AP)
+	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
+		update_bssid = 1;
 		memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
+	}
 
 	spin_unlock(&intf->lock);
 
@@ -375,17 +390,14 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	 * values as arguments we make keep access to rt2x00_intf thread safe
 	 * even without the lock.
 	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, conf->type, NULL, conf->bssid);
+	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
+			      update_bssid ? conf->bssid : NULL);
 
 	/*
-	 * We only need to initialize the beacon when master mode is enabled.
+	 * Update the beacon.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon)
-		return 0;
-
-	status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, conf->beacon);
-	if (status)
-		dev_kfree_skb(conf->beacon);
+	if (conf->changed & IEEE80211_IFCC_BEACON)
+		status = rt2x00queue_update_beacon(rt2x00dev, vif);
 
 	return status;
 }
@@ -501,7 +513,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	 * When the erp information has changed, we should perform
 	 * additional configuration steps. For all other changes we are done.
 	 */
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+	if (changes & (BSS_CHANGED_ERP_PREAMBLE | BSS_CHANGED_ERP_CTS_PROT)) {
 		if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
 			rt2x00lib_config_erp(rt2x00dev, intf, bss_conf);
 		else
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 3ddce538ef4a..7f442030f5ad 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -108,12 +108,15 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
+	if (!skb)
+		return;
+
 	rt2x00queue_unmap_skb(rt2x00dev, skb);
 	dev_kfree_skb_any(skb);
 }
 
-void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
-				      struct txentry_desc *txdesc)
+static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
+					     struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
@@ -237,10 +240,9 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 			txdesc->signal |= 0x08;
 	}
 }
-EXPORT_SYMBOL_GPL(rt2x00queue_create_tx_descriptor);
 
-void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
-				     struct txentry_desc *txdesc)
+static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
+					    struct txentry_desc *txdesc)
 {
 	struct data_queue *queue = entry->queue;
 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
@@ -270,7 +272,6 @@ void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 	    !test_bit(ENTRY_TXD_BURST, &txdesc->flags))
 		rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
 }
-EXPORT_SYMBOL_GPL(rt2x00queue_write_tx_descriptor);
 
 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 {
@@ -320,6 +321,60 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	return 0;
 }
 
+int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
+			      struct ieee80211_vif *vif)
+{
+	struct rt2x00_intf *intf = vif_to_intf(vif);
+	struct skb_frame_desc *skbdesc;
+	struct txentry_desc txdesc;
+	__le32 desc[16];
+
+	if (unlikely(!intf->beacon))
+		return -ENOBUFS;
+
+	intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
+	if (!intf->beacon->skb)
+		return -ENOMEM;
+
+	/*
+	 * Copy all TX descriptor information into txdesc,
+	 * after that we are free to use the skb->cb array
+	 * for our information.
+	 */
+	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
+
+	/*
+	 * For the descriptor we use a local array from where the
+	 * driver can move it to the correct location required for
+	 * the hardware.
+	 */
+	memset(desc, 0, sizeof(desc));
+
+	/*
+	 * Fill in skb descriptor
+	 */
+	skbdesc = get_skb_frame_desc(intf->beacon->skb);
+	memset(skbdesc, 0, sizeof(*skbdesc));
+	skbdesc->desc = desc;
+	skbdesc->desc_len = intf->beacon->queue->desc_size;
+	skbdesc->entry = intf->beacon;
+
+	/*
+	 * Write TX descriptor into reserved room in front of the beacon.
+	 */
+	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
+
+	/*
+	 * Send beacon to hardware.
+	 * Also enable beacon generation, which might have been disabled
+	 * by the driver during the config_beacon() callback function.
+	 */
+	rt2x00dev->ops->lib->write_beacon(intf->beacon);
+	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
+
+	return 0;
+}
+
 struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
 					 const enum data_queue_qid queue)
 {
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 5a1330c5de71..70ef7bf434ab 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1600,6 +1600,41 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
+static void rt61pci_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2x00pci_register_multiwrite(rt2x00dev,
+				      beacon_base,
+				      skbdesc->desc, skbdesc->desc_len);
+	rt2x00pci_register_multiwrite(rt2x00dev,
+				      beacon_base + skbdesc->desc_len,
+				      entry->skb->data, entry->skb->len);
+
+	/*
+	 * Clean up beacon skb.
+	 */
+	dev_kfree_skb_any(entry->skb);
+	entry->skb = NULL;
+}
+
 static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				  const enum data_queue_qid queue)
 {
@@ -2355,72 +2390,6 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
 	return tsf;
 }
 
-static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
-	struct queue_entry_priv_pci *entry_priv;
-	struct skb_frame_desc *skbdesc;
-	struct txentry_desc txdesc;
-	unsigned int beacon_base;
-	u32 reg;
-
-	if (unlikely(!intf->beacon))
-		return -ENOBUFS;
-
-	/*
-	 * Copy all TX descriptor information into txdesc,
-	 * after that we are free to use the skb->cb array
-	 * for our information.
-	 */
-	intf->beacon->skb = skb;
-	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
-	entry_priv = intf->beacon->priv_data;
-	memset(entry_priv->desc, 0, intf->beacon->queue->desc_size);
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->desc = entry_priv->desc;
-	skbdesc->desc_len = intf->beacon->queue->desc_size;
-	skbdesc->entry = intf->beacon;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
-
-	/*
-	 * Write entire beacon with descriptor to register,
-	 * and kick the beacon generator.
-	 */
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-	beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-	rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
-				      skbdesc->desc, skbdesc->desc_len);
-	rt2x00pci_register_multiwrite(rt2x00dev,
-				      beacon_base + skbdesc->desc_len,
-				      skb->data, skb->len);
-	rt61pci_kick_tx_queue(rt2x00dev, QID_BEACON);
-
-	/*
-	 * Clean up beacon skb.
-	 */
-	dev_kfree_skb_any(skb);
-	intf->beacon->skb = NULL;
-
-	return 0;
-}
-
 static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.tx			= rt2x00mac_tx,
 	.start			= rt2x00mac_start,
@@ -2436,7 +2405,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt61pci_get_tsf,
-	.beacon_update		= rt61pci_beacon_update,
 };
 
 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
@@ -2456,6 +2424,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.link_tuner		= rt61pci_link_tuner,
 	.write_tx_desc		= rt61pci_write_tx_desc,
 	.write_tx_data		= rt2x00pci_write_tx_data,
+	.write_beacon		= rt61pci_write_beacon,
 	.kick_tx_queue		= rt61pci_kick_tx_queue,
 	.fill_rxdone		= rt61pci_fill_rxdone,
 	.config_filter		= rt61pci_config_filter,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 25d8b660051f..34c6ff27afc4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1343,6 +1343,49 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_desc_write(txd, 0, word);
 }
 
+/*
+ * TX data initialization
+ */
+static void rt73usb_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Add the descriptor in front of the skb.
+	 */
+	skb_push(entry->skb, entry->queue->desc_size);
+	memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry->skb->data;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+	rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
+				 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
+				 entry->skb->data, entry->skb->len,
+				 REGISTER_TIMEOUT32(entry->skb->len));
+
+	/*
+	 * Clean up the beacon skb.
+	 */
+	dev_kfree_skb(entry->skb);
+	entry->skb = NULL;
+}
+
 static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
 				   struct sk_buff *skb)
 {
@@ -1358,9 +1401,6 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
 	return length;
 }
 
-/*
- * TX data initialization
- */
 static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				  const enum data_queue_qid queue)
 {
@@ -1958,73 +1998,6 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
 #define rt73usb_get_tsf	NULL
 #endif
 
-static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
-	struct skb_frame_desc *skbdesc;
-	struct txentry_desc txdesc;
-	unsigned int beacon_base;
-	u32 reg;
-
-	if (unlikely(!intf->beacon))
-		return -ENOBUFS;
-
-	/*
-	 * Copy all TX descriptor information into txdesc,
-	 * after that we are free to use the skb->cb array
-	 * for our information.
-	 */
-	intf->beacon->skb = skb;
-	rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
-	 * Add the descriptor in front of the skb.
-	 */
-	skb_push(skb, intf->beacon->queue->desc_size);
-	memset(skb->data, 0, intf->beacon->queue->desc_size);
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->desc = skb->data;
-	skbdesc->desc_len = intf->beacon->queue->desc_size;
-	skbdesc->entry = intf->beacon;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
-	rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
-
-	/*
-	 * Write entire beacon with descriptor to register,
-	 * and kick the beacon generator.
-	 */
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-	beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-	rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-				 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
-				 skb->data, skb->len,
-				 REGISTER_TIMEOUT32(skb->len));
-	rt73usb_kick_tx_queue(rt2x00dev, QID_BEACON);
-
-	/*
-	 * Clean up the beacon skb.
-	 */
-	dev_kfree_skb(skb);
-	intf->beacon->skb = NULL;
-
-	return 0;
-}
-
 static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.tx			= rt2x00mac_tx,
 	.start			= rt2x00mac_start,
@@ -2040,7 +2013,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt73usb_get_tsf,
-	.beacon_update		= rt73usb_beacon_update,
 };
 
 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
@@ -2058,6 +2030,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.link_tuner		= rt73usb_link_tuner,
 	.write_tx_desc		= rt73usb_write_tx_desc,
 	.write_tx_data		= rt2x00usb_write_tx_data,
+	.write_beacon		= rt73usb_write_beacon,
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
 	.kick_tx_queue		= rt73usb_kick_tx_queue,
 	.fill_rxdone		= rt73usb_fill_rxdone,