Merge branch 'writeback-workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq into for-3.10/core

Tejun writes:

-----

This is the pull request for the earlier patchset[1] with the same
name.  It's only three patches (the first one was committed to
workqueue tree) but the merge strategy is a bit involved due to the
dependencies.

* Because the conversion needs features from wq/for-3.10,
  block/for-3.10/core is based on rc3, and wq/for-3.10 has conflicts
  with rc3, I pulled mainline (rc5) into wq/for-3.10 to prevent those
  workqueue conflicts from flaring up in block tree.

* Resolving the issue that Jan and Dave raised about debugging
  requires arch-wide changes.  The patchset is being worked on[2] but
  it'll have to go through -mm after these changes show up in -next,
  and not included in this pull request.

The three commits are located in the following git branch.

  git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git writeback-workqueue

Pulling it into block/for-3.10/core produces a conflict in
drivers/md/raid5.c between the following two commits.

  e3620a3ad5 ("MD RAID5: Avoid accessing gendisk or queue structs when not available")
  2f6db2a707 ("raid5: use bio_reset()")

The conflict is trivial - one removes an "if ()" conditional while the
other removes "rbi->bi_next = NULL" right above it.  We just need to
remove both.  The merged branch is available at

  git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git block-test-merge

so that you can use it for verification.  The test merge commit has
proper merge description.

While these changes are a bit of pain to route, they make code simpler
and even have, while minute, measureable performance gain[3] even on a
workload which isn't particularly favorable to showing the benefits of
this conversion.

----

Fixed up the conflict.

Conflicts:
	drivers/md/raid5.c

Signed-off-by: Jens Axboe <axboe@kernel.dk>

2 files changed, 9 insertions, 9 deletions

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 44d6ead43341..2bf4efa33186 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -55,10 +55,10 @@ config RT61PCI
 
 config RT2800PCI
 	tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
-	depends on PCI || RALINK_RT288X || RALINK_RT305X
+	depends on PCI || SOC_RT288X || SOC_RT305X
 	select RT2800_LIB
 	select RT2X00_LIB_PCI if PCI
-	select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
+	select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
 	select RT2X00_LIB_FIRMWARE
 	select RT2X00_LIB_CRYPTO
 	select CRC_CCITT
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 48a01aa21f1c..ded73da4de0b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -89,7 +89,7 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 }
 
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
 static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
 	void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
@@ -107,7 +107,7 @@ static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
 	return -ENOMEM;
 }
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
 
 #ifdef CONFIG_PCI
 static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
@@ -1177,7 +1177,7 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
 #endif /* CONFIG_PCI */
 MODULE_LICENSE("GPL");
 
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
 static int rt2800soc_probe(struct platform_device *pdev)
 {
 	return rt2x00soc_probe(pdev, &rt2800pci_ops);
@@ -1194,7 +1194,7 @@ static struct platform_driver rt2800soc_driver = {
 	.suspend	= rt2x00soc_suspend,
 	.resume		= rt2x00soc_resume,
 };
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
 
 #ifdef CONFIG_PCI
 static int rt2800pci_probe(struct pci_dev *pci_dev,
@@ -1217,7 +1217,7 @@ static int __init rt2800pci_init(void)
 {
 	int ret = 0;
 
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
 	ret = platform_driver_register(&rt2800soc_driver);
 	if (ret)
 		return ret;
@@ -1225,7 +1225,7 @@ static int __init rt2800pci_init(void)
 #ifdef CONFIG_PCI
 	ret = pci_register_driver(&rt2800pci_driver);
 	if (ret) {
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
 		platform_driver_unregister(&rt2800soc_driver);
 #endif
 		return ret;
@@ -1240,7 +1240,7 @@ static void __exit rt2800pci_exit(void)
 #ifdef CONFIG_PCI
 	pci_unregister_driver(&rt2800pci_driver);
 #endif
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
 	platform_driver_unregister(&rt2800soc_driver);
 #endif
 }