wavelan: move driver to staging

Move the wavelan driver to drivers/staging.  This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist.  This driver
represents unnecessary ongoing maintenance for no clear benefit.

This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 370 deletions

diff --git a/drivers/net/wireless/wavelan.h b/drivers/net/wireless/wavelan.h
deleted file mode 100644
index 9ab360558ffd..000000000000
--- a/drivers/net/wireless/wavelan.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- *	WaveLAN ISA driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- * Original copyright follows. See wavelan.p.h for details.
- *
- * This file contains the declarations for the WaveLAN hardware. Note that
- * the WaveLAN ISA includes a i82586 controller (see definitions in
- * file i82586.h).
- *
- * The main difference between the ISA hardware and the PCMCIA one is
- * the Ethernet controller (i82586 instead of i82593).
- * The i82586 allows multiple transmit buffers.  The PSA needs to be accessed
- * through the host interface.
- */
-
-#ifndef _WAVELAN_H
-#define	_WAVELAN_H
-
-/************************** MAGIC NUMBERS ***************************/
-
-/* Detection of the WaveLAN card is done by reading the MAC
- * address from the card and checking it.  If you have a non-AT&T
- * product (OEM, like DEC RoamAbout, Digital Ocean, or Epson),
- * you might need to modify this part to accommodate your hardware.
- */
-static const char	MAC_ADDRESSES[][3] =
-{
-  { 0x08, 0x00, 0x0E },		/* AT&T WaveLAN (standard) & DEC RoamAbout */
-  { 0x08, 0x00, 0x6A },		/* AT&T WaveLAN (alternate) */
-  { 0x00, 0x00, 0xE1 },		/* Hitachi Wavelan */
-  { 0x00, 0x60, 0x1D }		/* Lucent Wavelan (another one) */
-  /* Add your card here and send me the patch! */
-};
-
-#define WAVELAN_ADDR_SIZE	6	/* Size of a MAC address */
-
-#define WAVELAN_MTU		1500	/* Maximum size of WaveLAN packet */
-
-#define	MAXDATAZ		(WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU)
-
-/*
- * Constants used to convert channels to frequencies
- */
-
-/* Frequency available in the 2.0 modem, in units of 250 kHz
- * (as read in the offset register of the dac area).
- * Used to map channel numbers used by `wfreqsel' to frequencies
- */
-static const short	channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
-				    0xD0, 0xF0, 0xF8, 0x150 };
-
-/* Frequencies of the 1.0 modem (fixed frequencies).
- * Use to map the PSA `subband' to a frequency
- * Note : all frequencies apart from the first one need to be multiplied by 10
- */
-static const int	fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
-
-
-
-/*************************** PC INTERFACE ****************************/
-
-/*
- * Host Adaptor structure.
- * (base is board port address).
- */
-typedef union hacs_u	hacs_u;
-union hacs_u
-{
-	unsigned short	hu_command;		/* Command register */
-#define		HACR_RESET		0x0001	/* Reset board */
-#define		HACR_CA			0x0002	/* Set Channel Attention for 82586 */
-#define		HACR_16BITS		0x0004	/* 16-bit operation (0 => 8bits) */
-#define		HACR_OUT0		0x0008	/* General purpose output pin 0 */
-						/* not used - must be 1 */
-#define		HACR_OUT1		0x0010	/* General purpose output pin 1 */
-						/* not used - must be 1 */
-#define		HACR_82586_INT_ENABLE	0x0020	/* Enable 82586 interrupts */
-#define		HACR_MMC_INT_ENABLE	0x0040	/* Enable MMC interrupts */
-#define		HACR_INTR_CLR_ENABLE	0x0080	/* Enable interrupt status read/clear */
-	unsigned short	hu_status;		/* Status Register */
-#define		HASR_82586_INTR		0x0001	/* Interrupt request from 82586 */
-#define		HASR_MMC_INTR		0x0002	/* Interrupt request from MMC */
-#define		HASR_MMC_BUSY		0x0004	/* MMC busy indication */
-#define		HASR_PSA_BUSY		0x0008	/* LAN parameter storage area busy */
-} __attribute__ ((packed));
-
-typedef struct ha_t	ha_t;
-struct ha_t
-{
-	hacs_u		ha_cs;		/* Command and status registers */
-#define 		ha_command	ha_cs.hu_command
-#define 		ha_status	ha_cs.hu_status
-	unsigned short	ha_mmcr;	/* Modem Management Ctrl Register */
-	unsigned short	ha_pior0;	/* Program I/O Address Register Port 0 */
-	unsigned short	ha_piop0;	/* Program I/O Port 0 */
-	unsigned short	ha_pior1;	/* Program I/O Address Register Port 1 */
-	unsigned short	ha_piop1;	/* Program I/O Port 1 */
-	unsigned short	ha_pior2;	/* Program I/O Address Register Port 2 */
-	unsigned short	ha_piop2;	/* Program I/O Port 2 */
-};
-
-#define HA_SIZE		16
-
-#define	hoff(p,f) 	(unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0)
-#define	HACR(p)		hoff(p, ha_command)
-#define	HASR(p)		hoff(p, ha_status)
-#define	MMCR(p)		hoff(p, ha_mmcr)
-#define	PIOR0(p)	hoff(p, ha_pior0)
-#define	PIOP0(p)	hoff(p, ha_piop0)
-#define	PIOR1(p)	hoff(p, ha_pior1)
-#define	PIOP1(p)	hoff(p, ha_piop1)
-#define	PIOR2(p)	hoff(p, ha_pior2)
-#define	PIOP2(p)	hoff(p, ha_piop2)
-
-/*
- * Program I/O Mode Register values.
- */
-#define STATIC_PIO		0	/* Mode 1: static mode */
-					/* RAM access ??? */
-#define AUTOINCR_PIO		1	/* Mode 2: auto increment mode */
-					/* RAM access ??? */
-#define AUTODECR_PIO		2	/* Mode 3: auto decrement mode */
-					/* RAM access ??? */
-#define PARAM_ACCESS_PIO	3	/* Mode 4: LAN parameter access mode */
-					/* Parameter access. */
-#define PIO_MASK		3	/* register mask */
-#define PIOM(cmd,piono)		((u_short)cmd << 10 << (piono * 2))
-
-#define	HACR_DEFAULT		(HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2))
-#define	HACR_INTRON		(HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE)
-
-/************************** MEMORY LAYOUT **************************/
-
-/*
- * Onboard 64 k RAM layout.
- * (Offsets from 0x0000.)
- */
-#define OFFSET_RU		0x0000		/* 75% memory */
-#define OFFSET_CU		0xC000		/* 25% memory */
-#define OFFSET_SCB		(OFFSET_ISCP - sizeof(scb_t))
-#define OFFSET_ISCP		(OFFSET_SCP - sizeof(iscp_t))
-#define OFFSET_SCP		I82586_SCP_ADDR
-
-#define	RXBLOCKZ		(sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ)
-#define	TXBLOCKZ		(sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ)
-
-#define	NRXBLOCKS		((OFFSET_CU - OFFSET_RU) / RXBLOCKZ)
-#define	NTXBLOCKS		((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ)
-
-/********************** PARAMETER STORAGE AREA **********************/
-
-/*
- * Parameter Storage Area (PSA).
- */
-typedef struct psa_t	psa_t;
-struct psa_t
-{
-  unsigned char	psa_io_base_addr_1;	/* [0x00] Base address 1 ??? */
-  unsigned char	psa_io_base_addr_2;	/* [0x01] Base address 2 */
-  unsigned char	psa_io_base_addr_3;	/* [0x02] Base address 3 */
-  unsigned char	psa_io_base_addr_4;	/* [0x03] Base address 4 */
-  unsigned char	psa_rem_boot_addr_1;	/* [0x04] Remote Boot Address 1 */
-  unsigned char	psa_rem_boot_addr_2;	/* [0x05] Remote Boot Address 2 */
-  unsigned char	psa_rem_boot_addr_3;	/* [0x06] Remote Boot Address 3 */
-  unsigned char	psa_holi_params;	/* [0x07] HOst Lan Interface (HOLI) Parameters */
-  unsigned char	psa_int_req_no;		/* [0x08] Interrupt Request Line */
-  unsigned char	psa_unused0[7];		/* [0x09-0x0F] unused */
-
-  unsigned char	psa_univ_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x10-0x15] Universal (factory) MAC Address */
-  unsigned char	psa_local_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x16-1B] Local MAC Address */
-  unsigned char	psa_univ_local_sel;	/* [0x1C] Universal Local Selection */
-#define		PSA_UNIVERSAL	0		/* Universal (factory) */
-#define		PSA_LOCAL	1		/* Local */
-  unsigned char	psa_comp_number;	/* [0x1D] Compatibility Number:	 */
-#define		PSA_COMP_PC_AT_915	0 	/* PC-AT 915 MHz 	 */
-#define		PSA_COMP_PC_MC_915	1 	/* PC-MC 915 MHz	 */
-#define		PSA_COMP_PC_AT_2400	2 	/* PC-AT 2.4 GHz	 */
-#define		PSA_COMP_PC_MC_2400	3 	/* PC-MC 2.4 GHz 	 */
-#define		PSA_COMP_PCMCIA_915	4 	/* PCMCIA 915 MHz or 2.0 */
-  unsigned char	psa_thr_pre_set;	/* [0x1E] Modem Threshold Preset */
-  unsigned char	psa_feature_select;	/* [0x1F] Call code required (1=on) */
-#define		PSA_FEATURE_CALL_CODE	0x01 	/* Call code required (Japan) */
-  unsigned char	psa_subband;		/* [0x20] Subband	  */
-#define		PSA_SUBBAND_915		0	/* 915 MHz or 2.0 */
-#define		PSA_SUBBAND_2425	1	/* 2425 MHz	  */
-#define		PSA_SUBBAND_2460	2	/* 2460 MHz	  */
-#define		PSA_SUBBAND_2484	3	/* 2484 MHz	  */
-#define		PSA_SUBBAND_2430_5	4	/* 2430.5 MHz	  */
-  unsigned char	psa_quality_thr;	/* [0x21] Modem Quality Threshold */
-  unsigned char	psa_mod_delay;		/* [0x22] Modem Delay (?) (reserved) */
-  unsigned char	psa_nwid[2];		/* [0x23-0x24] Network ID */
-  unsigned char	psa_nwid_select;	/* [0x25] Network ID Select On/Off */
-  unsigned char	psa_encryption_select;	/* [0x26] Encryption On/Off */
-  unsigned char	psa_encryption_key[8];	/* [0x27-0x2E] Encryption Key */
-  unsigned char	psa_databus_width;	/* [0x2F] AT bus width select 8/16 */
-  unsigned char	psa_call_code[8];	/* [0x30-0x37] (Japan) Call Code */
-  unsigned char	psa_nwid_prefix[2];	/* [0x38-0x39] Roaming domain */
-  unsigned char	psa_reserved[2];	/* [0x3A-0x3B] Reserved - fixed 00 */
-  unsigned char	psa_conf_status;	/* [0x3C] Conf Status, bit 0=1:config*/
-  unsigned char	psa_crc[2];		/* [0x3D] CRC-16 over PSA */
-  unsigned char	psa_crc_status;		/* [0x3F] CRC Valid Flag */
-};
-
-#define	PSA_SIZE	64
-
-/* Calculate offset of a field in the above structure.
- * Warning:  only even addresses are used. */
-#define	psaoff(p,f) 	((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
-
-/******************** MODEM MANAGEMENT INTERFACE ********************/
-
-/*
- * Modem Management Controller (MMC) write structure.
- */
-typedef struct mmw_t	mmw_t;
-struct mmw_t
-{
-  unsigned char	mmw_encr_key[8];	/* encryption key */
-  unsigned char	mmw_encr_enable;	/* Enable or disable encryption. */
-#define	MMW_ENCR_ENABLE_MODE	0x02	/* mode of security option */
-#define	MMW_ENCR_ENABLE_EN	0x01	/* Enable security option. */
-  unsigned char	mmw_unused0[1];		/* unused */
-  unsigned char	mmw_des_io_invert;	/* encryption option */
-#define	MMW_DES_IO_INVERT_RES	0x0F	/* reserved */
-#define	MMW_DES_IO_INVERT_CTRL	0xF0	/* control (?) (set to 0) */
-  unsigned char	mmw_unused1[5];		/* unused */
-  unsigned char	mmw_loopt_sel;		/* looptest selection */
-#define	MMW_LOOPT_SEL_DIS_NWID	0x40	/* Disable NWID filtering. */
-#define	MMW_LOOPT_SEL_INT	0x20	/* Activate Attention Request. */
-#define	MMW_LOOPT_SEL_LS	0x10	/* looptest, no collision avoidance */
-#define MMW_LOOPT_SEL_LT3A	0x08	/* looptest 3a */
-#define	MMW_LOOPT_SEL_LT3B	0x04	/* looptest 3b */
-#define	MMW_LOOPT_SEL_LT3C	0x02	/* looptest 3c */
-#define	MMW_LOOPT_SEL_LT3D	0x01	/* looptest 3d */
-  unsigned char	mmw_jabber_enable;	/* jabber timer enable */
-  /* Abort transmissions > 200 ms */
-  unsigned char	mmw_freeze;		/* freeze or unfreeze signal level */
-  /* 0 : signal level & qual updated for every new message, 1 : frozen */
-  unsigned char	mmw_anten_sel;		/* antenna selection */
-#define MMW_ANTEN_SEL_SEL	0x01	/* direct antenna selection */
-#define	MMW_ANTEN_SEL_ALG_EN	0x02	/* antenna selection algo. enable */
-  unsigned char	mmw_ifs;		/* inter frame spacing */
-  /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
-  unsigned char	mmw_mod_delay;	 	/* modem delay (synchro) */
-  unsigned char	mmw_jam_time;		/* jamming time (after collision) */
-  unsigned char	mmw_unused2[1];		/* unused */
-  unsigned char	mmw_thr_pre_set;	/* level threshold preset */
-  /* Discard all packet with signal < this value (4) */
-  unsigned char	mmw_decay_prm;		/* decay parameters */
-  unsigned char	mmw_decay_updat_prm;	/* decay update parameters */
-  unsigned char	mmw_quality_thr;	/* quality (z-quotient) threshold */
-  /* Discard all packet with quality < this value (3) */
-  unsigned char	mmw_netw_id_l;		/* NWID low order byte */
-  unsigned char	mmw_netw_id_h;		/* NWID high order byte */
-  /* Network ID or Domain : create virtual net on the air */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmw_mode_select;	/* for analog tests (set to 0) */
-  unsigned char	mmw_unused3[1];		/* unused */
-  unsigned char	mmw_fee_ctrl;		/* frequency EEPROM control */
-#define	MMW_FEE_CTRL_PRE	0x10	/* Enable protected instructions. */
-#define	MMW_FEE_CTRL_DWLD	0x08	/* Download EEPROM to mmc. */
-#define	MMW_FEE_CTRL_CMD	0x07	/* EEPROM commands:  */
-#define	MMW_FEE_CTRL_READ	0x06	/* Read */
-#define	MMW_FEE_CTRL_WREN	0x04	/* Write enable */
-#define	MMW_FEE_CTRL_WRITE	0x05	/* Write data to address. */
-#define	MMW_FEE_CTRL_WRALL	0x04	/* Write data to all addresses. */
-#define	MMW_FEE_CTRL_WDS	0x04	/* Write disable */
-#define	MMW_FEE_CTRL_PRREAD	0x16	/* Read addr from protect register */
-#define	MMW_FEE_CTRL_PREN	0x14	/* Protect register enable */
-#define	MMW_FEE_CTRL_PRCLEAR	0x17	/* Unprotect all registers. */
-#define	MMW_FEE_CTRL_PRWRITE	0x15	/* Write address in protect register */
-#define	MMW_FEE_CTRL_PRDS	0x14	/* Protect register disable */
-  /* Never issue the PRDS command:  it's irreversible! */
-
-  unsigned char	mmw_fee_addr;		/* EEPROM address */
-#define	MMW_FEE_ADDR_CHANNEL	0xF0	/* Select the channel. */
-#define	MMW_FEE_ADDR_OFFSET	0x0F	/* Offset in channel data */
-#define	MMW_FEE_ADDR_EN		0xC0	/* FEE_CTRL enable operations */
-#define	MMW_FEE_ADDR_DS		0x00	/* FEE_CTRL disable operations */
-#define	MMW_FEE_ADDR_ALL	0x40	/* FEE_CTRL all operations */
-#define	MMW_FEE_ADDR_CLEAR	0xFF	/* FEE_CTRL clear operations */
-
-  unsigned char	mmw_fee_data_l;		/* Write data to EEPROM. */
-  unsigned char	mmw_fee_data_h;		/* high octet */
-  unsigned char	mmw_ext_ant;		/* Setting for external antenna */
-#define	MMW_EXT_ANT_EXTANT	0x01	/* Select external antenna */
-#define	MMW_EXT_ANT_POL		0x02	/* Polarity of the antenna */
-#define	MMW_EXT_ANT_INTERNAL	0x00	/* Internal antenna */
-#define	MMW_EXT_ANT_EXTERNAL	0x03	/* External antenna */
-#define	MMW_EXT_ANT_IQ_TEST	0x1C	/* IQ test pattern (set to 0) */
-} __attribute__ ((packed));
-
-#define	MMW_SIZE	37
-
-#define	mmwoff(p,f) 	(unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
-
-/*
- * Modem Management Controller (MMC) read structure.
- */
-typedef struct mmr_t	mmr_t;
-struct mmr_t
-{
-  unsigned char	mmr_unused0[8];		/* unused */
-  unsigned char	mmr_des_status;		/* encryption status */
-  unsigned char	mmr_des_avail;		/* encryption available (0x55 read) */
-#define	MMR_DES_AVAIL_DES	0x55		/* DES available */
-#define	MMR_DES_AVAIL_AES	0x33		/* AES (AT&T) available */
-  unsigned char	mmr_des_io_invert;	/* des I/O invert register */
-  unsigned char	mmr_unused1[5];		/* unused */
-  unsigned char	mmr_dce_status;		/* DCE status */
-#define	MMR_DCE_STATUS_RX_BUSY		0x01	/* receiver busy */
-#define	MMR_DCE_STATUS_LOOPT_IND	0x02	/* loop test indicated */
-#define	MMR_DCE_STATUS_TX_BUSY		0x04	/* transmitter on */
-#define	MMR_DCE_STATUS_JBR_EXPIRED	0x08	/* jabber timer expired */
-#define MMR_DCE_STATUS			0x0F	/* mask to get the bits */
-  unsigned char	mmr_dsp_id;		/* DSP ID (AA = Daedalus rev A) */
-  unsigned char	mmr_unused2[2];		/* unused */
-  unsigned char	mmr_correct_nwid_l;	/* # of correct NWIDs rxd (low) */
-  unsigned char	mmr_correct_nwid_h;	/* # of correct NWIDs rxd (high) */
-  /* Warning:  read high-order octet first! */
-  unsigned char	mmr_wrong_nwid_l;	/* # of wrong NWIDs rxd (low) */
-  unsigned char	mmr_wrong_nwid_h;	/* # of wrong NWIDs rxd (high) */
-  unsigned char	mmr_thr_pre_set;	/* level threshold preset */
-#define	MMR_THR_PRE_SET		0x3F		/* level threshold preset */
-#define	MMR_THR_PRE_SET_CUR	0x80		/* Current signal above it */
-  unsigned char	mmr_signal_lvl;		/* signal level */
-#define	MMR_SIGNAL_LVL		0x3F		/* signal level */
-#define	MMR_SIGNAL_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_silence_lvl;	/* silence level (noise) */
-#define	MMR_SILENCE_LVL		0x3F		/* silence level */
-#define	MMR_SILENCE_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_sgnl_qual;		/* signal quality */
-#define	MMR_SGNL_QUAL		0x0F		/* signal quality */
-#define	MMR_SGNL_QUAL_ANT	0x80		/* current antenna used */
-  unsigned char	mmr_netw_id_l;		/* NWID low order byte (?) */
-  unsigned char	mmr_unused3[3];		/* unused */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmr_fee_status;		/* Status of frequency EEPROM */
-#define	MMR_FEE_STATUS_ID	0xF0		/* Modem revision ID */
-#define	MMR_FEE_STATUS_DWLD	0x08		/* Download in progress */
-#define	MMR_FEE_STATUS_BUSY	0x04		/* EEPROM busy */
-  unsigned char	mmr_unused4[1];		/* unused */
-  unsigned char	mmr_fee_data_l;		/* Read data from EEPROM (low) */
-  unsigned char	mmr_fee_data_h;		/* Read data from EEPROM (high) */
-} __attribute__ ((packed));
-
-#define	MMR_SIZE	36
-
-#define	mmroff(p,f) 	(unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
-
-/* Make the two above structures one */
-typedef union mm_t
-{
-  struct mmw_t	w;	/* Write to the mmc */
-  struct mmr_t	r;	/* Read from the mmc */
-} mm_t;
-
-#endif /* _WAVELAN_H */
-
-/*
- * This software may only be used and distributed
- * according to the terms of the GNU General Public License.
- *
- * For more details, see wavelan.c.
- */