summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
authorKalle Valo <kalle.valo@nokia.com>2009-04-29 23:33:31 +0300
committerJohn W. Linville <linville@tuxdriver.com>2009-05-06 15:14:54 -0400
commit2f01a1f58889fbfeb68b1bc1b52e4197f3333490 (patch)
tree949cf33c4e3dcdf7abcf95c9bda4d8372da04f97 /drivers/net/wireless
parentd53d9e67b55f6a9fc3f836c5c392eb41ce5676f4 (diff)
wl12xx: add driver
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/Kconfig1
-rw-r--r--drivers/net/wireless/Makefile2
-rw-r--r--drivers/net/wireless/wl12xx/Kconfig11
-rw-r--r--drivers/net/wireless/wl12xx/Makefile4
-rw-r--r--drivers/net/wireless/wl12xx/acx.c689
-rw-r--r--drivers/net/wireless/wl12xx/acx.h1245
-rw-r--r--drivers/net/wireless/wl12xx/boot.c295
-rw-r--r--drivers/net/wireless/wl12xx/boot.h40
-rw-r--r--drivers/net/wireless/wl12xx/cmd.c353
-rw-r--r--drivers/net/wireless/wl12xx/cmd.h265
-rw-r--r--drivers/net/wireless/wl12xx/debugfs.c508
-rw-r--r--drivers/net/wireless/wl12xx/debugfs.h33
-rw-r--r--drivers/net/wireless/wl12xx/event.c127
-rw-r--r--drivers/net/wireless/wl12xx/event.h121
-rw-r--r--drivers/net/wireless/wl12xx/init.c200
-rw-r--r--drivers/net/wireless/wl12xx/init.h40
-rw-r--r--drivers/net/wireless/wl12xx/main.c1358
-rw-r--r--drivers/net/wireless/wl12xx/ps.c151
-rw-r--r--drivers/net/wireless/wl12xx/ps.h36
-rw-r--r--drivers/net/wireless/wl12xx/reg.h745
-rw-r--r--drivers/net/wireless/wl12xx/rx.c208
-rw-r--r--drivers/net/wireless/wl12xx/rx.h122
-rw-r--r--drivers/net/wireless/wl12xx/spi.c358
-rw-r--r--drivers/net/wireless/wl12xx/spi.h109
-rw-r--r--drivers/net/wireless/wl12xx/tx.c557
-rw-r--r--drivers/net/wireless/wl12xx/tx.h215
-rw-r--r--drivers/net/wireless/wl12xx/wl1251.c709
-rw-r--r--drivers/net/wireless/wl12xx/wl1251.h165
-rw-r--r--drivers/net/wireless/wl12xx/wl12xx.h409
-rw-r--r--drivers/net/wireless/wl12xx/wl12xx_80211.h156
30 files changed, 9232 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2d8434f409b6..91be3e7bf133 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -500,5 +500,6 @@ source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 0625e91b5995..f2b1861e6bcb 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -58,3 +58,5 @@ obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_ATH_COMMON) += ath/
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
+
+obj-$(CONFIG_WL12XX) += wl12xx/
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
new file mode 100644
index 000000000000..20a9633569f2
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -0,0 +1,11 @@
+config WL12XX
+ tristate "TI wl1251/wl1271 support"
+ depends on MAC80211 && WLAN_80211 && SPI_MASTER && EXPERIMENTAL
+ select FW_LOADER
+ select CRC7
+ ---help---
+ This module adds support for wireless adapters based on
+ TI wl1251/wl1271 chipsets.
+
+ If you choose to build a module, it'll be called wl12xx. Say N if
+ unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
new file mode 100644
index 000000000000..d43de27dc54c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -0,0 +1,4 @@
+wl12xx-objs = main.o spi.o event.o tx.o rx.o \
+ ps.o cmd.o acx.o boot.o init.o wl1251.o \
+ debugfs.o
+obj-$(CONFIG_WL12XX) += wl12xx.o
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
new file mode 100644
index 000000000000..1cfd458ad5ab
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -0,0 +1,689 @@
+#include "acx.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod)
+{
+ int ret;
+ struct acx_fw_gen_frame_rates rates;
+
+ wl12xx_debug(DEBUG_ACX, "acx frame rates");
+
+ rates.header.id = ACX_FW_GEN_FRAME_RATES;
+ rates.header.len = sizeof(struct acx_fw_gen_frame_rates) -
+ sizeof(struct acx_header);
+
+ rates.tx_ctrl_frame_rate = ctrl_rate;
+ rates.tx_ctrl_frame_mod = ctrl_mod;
+ rates.tx_mgt_frame_rate = mgt_rate;
+ rates.tx_mgt_frame_mod = mgt_mod;
+
+ ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates));
+ if (ret < 0) {
+ wl12xx_error("Failed to set FW rates and modulation");
+ return ret;
+ }
+
+ return 0;
+}
+
+
+int wl12xx_acx_station_id(struct wl12xx *wl)
+{
+ int ret, i;
+ struct dot11_station_id mac;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_station_id");
+
+ mac.header.id = DOT11_STATION_ID;
+ mac.header.len = sizeof(mac) - sizeof(struct acx_header);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+ ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id)
+{
+ struct acx_dot11_default_key default_key;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+ default_key.header.id = DOT11_DEFAULT_KEY;
+ default_key.header.len = sizeof(default_key) -
+ sizeof(struct acx_header);
+
+ default_key.id = key_id;
+
+ ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key));
+ if (ret < 0) {
+ wl12xx_error("Couldnt set default key");
+ return ret;
+ }
+
+ wl->default_key = key_id;
+
+ return 0;
+}
+
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval)
+{
+ struct acx_wake_up_condition wake_up;
+
+ wl12xx_debug(DEBUG_ACX, "acx wake up conditions");
+
+ wake_up.header.id = ACX_WAKE_UP_CONDITIONS;
+ wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header);
+
+ wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP;
+ wake_up.listen_interval = listen_interval;
+
+ return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up));
+}
+
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth)
+{
+ int ret;
+ struct acx_sleep_auth auth;
+
+ wl12xx_debug(DEBUG_ACX, "acx sleep auth");
+
+ auth.header.id = ACX_SLEEP_AUTH;
+ auth.header.len = sizeof(auth) - sizeof(struct acx_header);
+
+ auth.sleep_auth = sleep_auth;
+
+ ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len)
+{
+ struct wl12xx_command cmd;
+ struct acx_revision *rev;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx fw rev");
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd);
+ if (ret < 0) {
+ wl12xx_warning("ACX_FW_REV interrogate failed");
+ return ret;
+ }
+
+ rev = (struct acx_revision *) &cmd.parameters;
+
+ /* be careful with the buffer sizes */
+ strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+ /*
+ * if the firmware version string is exactly
+ * sizeof(rev->fw_version) long or fw_len is less than
+ * sizeof(rev->fw_version) it won't be null terminated
+ */
+ buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+ return 0;
+}
+
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power)
+{
+ struct acx_current_tx_power ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+ if (power < 0 || power > 25)
+ return -EINVAL;
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = DOT11_CUR_TX_PWR;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.current_tx_power = power * 10;
+
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("configure of tx power failed: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_feature_cfg(struct wl12xx *wl)
+{
+ struct acx_feature_config feature;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx feature cfg");
+
+ memset(&feature, 0, sizeof(feature));
+
+ feature.header.id = ACX_FEATURE_CFG;
+ feature.header.len = sizeof(feature) - sizeof(struct acx_header);
+
+ /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+ feature.data_flow_options = 0;
+ feature.options = 0;
+
+ ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature));
+ if (ret < 0)
+ wl12xx_error("Couldnt set HW encryption");
+
+ return ret;
+}
+
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len)
+{
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx mem map");
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd);
+ if (ret < 0)
+ return ret;
+ else if (cmd.status != CMD_STATUS_SUCCESS)
+ return -EIO;
+
+ memcpy(mem_map, &cmd.parameters, len);
+
+ return 0;
+}
+
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+ struct acx_data_path_params_resp *data_path)
+{
+ struct acx_data_path_params params;
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx data path params");
+
+ params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+ params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+ params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+ params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+ params.tx_complete_threshold = 1;
+
+ params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+ params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+ params.header.id = ACX_DATA_PATH_PARAMS;
+ params.header.len = sizeof(params) - sizeof(struct acx_header);
+
+ ret = wl12xx_cmd_configure(wl, &params, sizeof(params));
+ if (ret < 0)
+ return ret;
+
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+ sizeof(struct acx_data_path_params_resp),
+ &cmd);
+
+ if (ret < 0) {
+ wl12xx_warning("failed to read data path parameters: %d", ret);
+ return ret;
+ } else if (cmd.status != CMD_STATUS_SUCCESS) {
+ wl12xx_warning("data path parameter acx status failed");
+ return -EIO;
+ }
+
+ memcpy(data_path, &cmd.parameters, sizeof(*data_path));
+
+ return 0;
+}
+
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time)
+{
+ struct rx_msdu_lifetime msdu_lifetime;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rx msdu life time");
+
+ msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME;
+ msdu_lifetime.header.len = sizeof(msdu_lifetime) -
+ sizeof(struct acx_header);
+ msdu_lifetime.lifetime = life_time;
+
+ ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx msdu life time: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+ struct acx_rx_config rx_config;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rx config");
+
+ rx_config.header.id = ACX_RX_CFG;
+ rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header);
+ rx_config.config_options = config;
+ rx_config.filter_options = filter;
+
+ ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_pd_threshold(struct wl12xx *wl)
+{
+ struct acx_packet_detection packet_detection;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx data pd threshold");
+
+ /* FIXME: threshold value not set */
+ packet_detection.header.id = ACX_PD_THRESHOLD;
+ packet_detection.header.len = sizeof(packet_detection) -
+ sizeof(struct acx_header);
+
+ ret = wl12xx_cmd_configure(wl, &packet_detection,
+ sizeof(packet_detection));
+ if (ret < 0) {
+ wl12xx_warning("failed to set pd threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time)
+{
+ struct acx_slot slot;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx slot");
+
+ slot.header.id = ACX_SLOT;
+ slot.header.len = sizeof(slot) - sizeof(struct acx_header);
+
+ slot.wone_index = STATION_WONE_INDEX;
+ slot.slot_time = slot_time;
+
+ ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot));
+ if (ret < 0) {
+ wl12xx_warning("failed to set slot time: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl)
+{
+ struct multicast_grp_addr_start multicast;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx group address tbl");
+
+ /* MAC filtering */
+ multicast.header.id = DOT11_GROUP_ADDRESS_TBL;
+ multicast.header.len = sizeof(multicast) - sizeof(struct acx_header);
+
+ multicast.enabled = 0;
+ multicast.num_groups = 0;
+ memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+ ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast));
+ if (ret < 0) {
+ wl12xx_warning("failed to set group addr table: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl)
+{
+ struct acx_rx_timeout rx_timeout;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx service period timeout");
+
+ /* RX timeout */
+ rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT;
+ rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header);
+
+ rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+ rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout));
+ if (ret < 0) {
+ wl12xx_warning("failed to set service period timeout: %d",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold)
+{
+ struct acx_rts_threshold rts;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rts threshold");
+
+ rts.header.id = DOT11_RTS_THRESHOLD;
+ rts.header.len = sizeof(rts) - sizeof(struct acx_header);
+
+ rts.threshold = rts_threshold;
+
+ ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rts threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl)
+{
+ struct acx_beacon_filter_option beacon_filter;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx beacon filter opt");
+
+ beacon_filter.header.id = ACX_BEACON_FILTER_OPT;
+ beacon_filter.header.len = sizeof(beacon_filter) -
+ sizeof(struct acx_header);
+
+ beacon_filter.enable = 0;
+ beacon_filter.max_num_beacons = 0;
+
+ ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter));
+ if (ret < 0) {
+ wl12xx_warning("failed to set beacon filter opt: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl)
+{
+ struct acx_beacon_filter_ie_table ie_table;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx beacon filter table");
+
+ ie_table.header.id = ACX_BEACON_FILTER_TABLE;
+ ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header);
+
+ ie_table.num_ie = 0;
+ memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+ ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table));
+ if (ret < 0) {
+ wl12xx_warning("failed to set beacon filter table: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_sg_enable(struct wl12xx *wl)
+{
+ struct acx_bt_wlan_coex pta;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx sg enable");
+
+ pta.header.id = ACX_SG_ENABLE;
+ pta.header.len = sizeof(pta) - sizeof(struct acx_header);
+
+ pta.enable = SG_ENABLE;
+
+ ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta));
+ if (ret < 0) {
+ wl12xx_warning("failed to set softgemini enable: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_sg_cfg(struct wl12xx *wl)
+{
+ struct acx_bt_wlan_coex_param param;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx sg cfg");
+
+ /* BT-WLAN coext parameters */
+ param.header.id = ACX_SG_CFG;
+ param.header.len = sizeof(param) - sizeof(struct acx_header);
+
+ param.min_rate = RATE_INDEX_24MBPS;
+ param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+ param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+ param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+ param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+ param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+ param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+ param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+ param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+ param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+ param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+ param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+ param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+ param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+ param.antenna_type = PTA_ANTENNA_TYPE_DEF;
+ param.signal_type = PTA_SIGNALING_TYPE_DEF;
+ param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+ param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+ param.max_cts = PTA_MAX_NUM_CTS_DEF;
+ param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+ param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+ param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+ param.wlan_elp_hp = PTA_ELP_HP_DEF;
+ param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+ param.ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+ param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+ param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+ param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &param, sizeof(param));
+ if (ret < 0) {
+ wl12xx_warning("failed to set sg config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_cca_threshold(struct wl12xx *wl)
+{
+ struct acx_energy_detection detection;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx cca threshold");
+
+ detection.header.id = ACX_CCA_THRESHOLD;
+ detection.header.len = sizeof(detection) - sizeof(struct acx_header);
+
+ detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+ detection.tx_energy_detection = 0;
+
+ ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection));
+ if (ret < 0) {
+ wl12xx_warning("failed to set cca threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl)
+{
+ struct acx_beacon_broadcast bb;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx bcn dtim options");
+
+ bb.header.id = ACX_BCN_DTIM_OPTIONS;
+ bb.header.len = sizeof(bb) - sizeof(struct acx_header);
+
+ bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+ bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+ bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+ bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid)
+{
+ struct acx_aid acx_aid;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx aid");
+
+ acx_aid.header.id = ACX_AID;
+ acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header);
+
+ acx_aid.aid = aid;
+
+ ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid));
+ if (ret < 0) {
+ wl12xx_warning("failed to set aid: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask)
+{
+ struct acx_event_mask mask;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx event mbox mask");
+
+ mask.header.id = ACX_EVENT_MBOX_MASK;
+ mask.header.len = sizeof(mask) - sizeof(struct acx_header);
+
+ /* high event mask is unused */
+ mask.high_event_mask = 0xffffffff;
+
+ mask.event_mask = event_mask;
+
+ ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask));
+ if (ret < 0) {
+ wl12xx_warning("failed to set aid: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble)
+{
+ struct acx_preamble ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx_set_preamble");
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = ACX_PREAMBLE_TYPE;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.preamble = preamble;
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("Setting of preamble failed: %d", ret);
+ return ret;
+ }
+ return 0;
+}
+
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+ enum acx_ctsprotect_type ctsprotect)
+{
+ struct acx_ctsprotect ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = ACX_CTS_PROTECTION;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.ctsprotect = ctsprotect;
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("Setting of ctsprotect failed: %d", ret);
+ return ret;
+ }
+ return 0;
+}
+
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats)
+{
+ struct wl12xx_command *answer;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx statistics");
+
+ answer = kmalloc(sizeof(*answer), GFP_KERNEL);
+ if (!answer) {
+ wl12xx_warning("could not allocate memory for acx statistics");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer),
+ answer);
+ if (ret < 0) {
+ wl12xx_warning("acx statistics failed: %d", ret);
+ goto out;
+ }
+
+ memcpy(stats, answer->parameters, sizeof(*stats));
+
+out:
+ kfree(answer);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
new file mode 100644
index 000000000000..fb2d2340993c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -0,0 +1,1245 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
+
+#include "wl12xx.h"
+
+/* Target's information element */
+struct acx_header {
+ u16 id;
+ u16 len;
+};
+
+struct acx_error_counter {
+ struct acx_header header;
+
+ /* The number of PLCP errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 PLCP_error;
+
+ /* The number of FCS errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 FCS_error;
+
+ /* The number of MPDUs without PLCP header errors received*/
+ /* since the last time this information element was interrogated. */
+ /* This field is automatically cleared when it is interrogated.*/
+ u32 valid_frame;
+
+ /* the number of missed sequence numbers in the squentially */
+ /* values of frames seq numbers */
+ u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+ struct acx_header header;
+
+ /*
+ * The WiLink firmware version, an ASCII string x.x.x.x,
+ * that uniquely identifies the current firmware.
+ * The left most digit is incremented each time a
+ * significant change is made to the firmware, such as
+ * code redesign or new platform support.
+ * The second digit is incremented when major enhancements
+ * are added or major fixes are made.
+ * The third digit is incremented for each GA release.
+ * The fourth digit is incremented for each build.
+ * The first two digits identify a firmware release version,
+ * in other words, a unique set of features.
+ * The first three digits identify a GA release.
+ */
+ char fw_version[20];
+
+ /*
+ * This 4 byte field specifies the WiLink hardware version.
+ * bits 0 - 15: Reserved.
+ * bits 16 - 23: Version ID - The WiLink version ID
+ * (1 = first spin, 2 = second spin, and so on).
+ * bits 24 - 31: Chip ID - The WiLink chip ID.
+ */
+ u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl12xx_psm_mode {
+ /* Active mode */
+ WL12XX_PSM_CAM = 0,
+
+ /* Power save mode */
+ WL12XX_PSM_PS = 1,
+
+ /* Extreme low power */
+ WL12XX_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+ struct acx_header header;
+
+ /* The sleep level authorization of the device. */
+ /* 0 - Always active*/
+ /* 1 - Power down mode: light / fast sleep*/
+ /* 2 - ELP mode: Deep / Max sleep*/
+ u8 sleep_auth;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID 5
+#define PARTIAL_VBM_MAX 251
+
+struct tim {
+ u8 identity;
+ u8 length;
+ u8 dtim_count;
+ u8 dtim_period;
+ u8 bitmap_ctrl;
+ u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+/* Virtual Bit Map update */
+struct vbm_update_request {
+ __le16 len;
+ u8 padding[2];
+ struct tim tim;
+} __attribute__ ((packed));
+
+enum {
+ HOSTIF_PCI_MASTER_HOST_INDIRECT,
+ HOSTIF_PCI_MASTER_HOST_DIRECT,
+ HOSTIF_SLAVE,
+ HOSTIF_PKT_RING,
+ HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY 0
+#define DEFAULT_RX_Q_PRIORITY 0
+#define DEFAULT_NUM_STATIONS 1
+#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */
+#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE 256
+
+#define DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_RX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_COMPLETE_TIME_OUT 20
+#define FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ /*
+ * Maximum number of packets that can be gathered
+ * in the TX complete ring before an interrupt
+ * is generated.
+ */
+ u8 tx_complete_threshold;
+
+ /* Number of pending TX complete entries in cyclic ring.*/
+ u8 tx_complete_ring_depth;
+
+ /*
+ * Max num microseconds since a packet enters the TX
+ * complete ring until an interrupt is generated.
+ */
+ u32 tx_complete_timeout;
+} __attribute__ ((packed));
+
+
+struct acx_data_path_params_resp {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ u8 pad[2];
+
+ u32 rx_packet_ring_addr;
+ u32 tx_packet_ring_addr;
+
+ u32 rx_control_addr;
+ u32 tx_control_addr;
+
+ u32 tx_complete_addr;
+} __attribute__ ((packed));
+
+#define TX_MSDU_LIFETIME_MIN 0
+#define TX_MSDU_LIFETIME_MAX 3000
+#define TX_MSDU_LIFETIME_DEF 512
+#define RX_MSDU_LIFETIME_MIN 0
+#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF 512000
+
+struct rx_msdu_lifetime {
+ struct acx_header header;
+
+ /*
+ * The maximum amount of time, in TU, before the
+ * firmware discards the MSDU.
+ */
+ u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit Definition
+ * === ==========
+ * 31:14 Reserved
+ * 13 Copy RX Status - when set, write three receive status words
+ * to top of rx'd MPDUs.
+ * When cleared, do not write three status words (added rev 1.5)
+ * 12 Reserved
+ * 11 RX Complete upon FCS error - when set, give rx complete
+ * interrupt for FCS errors, after the rx filtering, e.g. unicast
+ * frames not to us with FCS error will not generate an interrupt.
+ * 10 SSID Filter Enable - When set, the WiLink discards all beacon,
+ * probe request, and probe response frames with an SSID that does
+ * not match the SSID specified by the host in the START/JOIN
+ * command.
+ * When clear, the WiLink receives frames with any SSID.
+ * 9 Broadcast Filter Enable - When set, the WiLink discards all
+ * broadcast frames. When clear, the WiLink receives all received
+ * broadcast frames.
+ * 8:6 Reserved
+ * 5 BSSID Filter Enable - When set, the WiLink discards any frames
+ * with a BSSID that does not match the BSSID specified by the
+ * host.
+ * When clear, the WiLink receives frames from any BSSID.
+ * 4 MAC Addr Filter - When set, the WiLink discards any frames
+ * with a destination address that does not match the MAC address
+ * of the adaptor.
+ * When clear, the WiLink receives frames destined to any MAC
+ * address.
+ * 3 Promiscuous - When set, the WiLink receives all valid frames
+ * (i.e., all frames that pass the FCS check).
+ * When clear, only frames that pass the other filters specified
+ * are received.
+ * 2 FCS - When set, the WiLink includes the FCS with the received
+ * frame.
+ * When cleared, the FCS is discarded.
+ * 1 PLCP header - When set, write all data from baseband to frame
+ * buffer including PHY header.
+ * 0 Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit Definition
+ * === ==========
+ * 31:12 Reserved - Always equal to 0.
+ * 11 Association - When set, the WiLink receives all association
+ * related frames (association request/response, reassocation
+ * request/response, and disassociation). When clear, these frames
+ * are discarded.
+ * 10 Auth/De auth - When set, the WiLink receives all authentication
+ * and de-authentication frames. When clear, these frames are
+ * discarded.
+ * 9 Beacon - When set, the WiLink receives all beacon frames.
+ * When clear, these frames are discarded.
+ * 8 Contention Free - When set, the WiLink receives all contention
+ * free frames.
+ * When clear, these frames are discarded.
+ * 7 Control - When set, the WiLink receives all control frames.
+ * When clear, these frames are discarded.
+ * 6 Data - When set, the WiLink receives all data frames.
+ * When clear, these frames are discarded.
+ * 5 FCS Error - When set, the WiLink receives frames that have FCS
+ * errors.
+ * When clear, these frames are discarded.
+ * 4 Management - When set, the WiLink receives all management
+ * frames.
+ * When clear, these frames are discarded.
+ * 3 Probe Request - When set, the WiLink receives all probe request
+ * frames.
+ * When clear, these frames are discarded.
+ * 2 Probe Response - When set, the WiLink receives all probe
+ * response frames.
+ * When clear, these frames are discarded.
+ * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * frames.
+ * When clear, these frames are discarded.
+ * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * that have reserved frame types and sub types as defined by the
+ * 802.11 specification.
+ * When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+ struct acx_header header;
+
+ u32 config_options;
+ u32 filter_options;
+} __attribute__ ((packed));
+
+enum {
+ QOS_AC_BE = 0,
+ QOS_AC_BK,
+ QOS_AC_VI,
+ QOS_AC_VO,
+ QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS 8
+#define AC_PARAMS_MAX_TSID 15
+#define MAX_APSD_CONF 0xffff
+
+#define QOS_TX_HIGH_MIN (0)
+#define QOS_TX_HIGH_MAX (100)
+
+#define QOS_TX_HIGH_BK_DEF (25)
+#define QOS_TX_HIGH_BE_DEF (35)
+#define QOS_TX_HIGH_VI_DEF (35)
+#define QOS_TX_HIGH_VO_DEF (35)
+
+#define QOS_TX_LOW_BK_DEF (15)
+#define QOS_TX_LOW_BE_DEF (25)
+#define QOS_TX_LOW_VI_DEF (25)
+#define QOS_TX_LOW_VO_DEF (25)
+
+struct acx_tx_queue_qos_config {
+ struct acx_header header;
+
+ u8 qid;
+ u8 pad[3];
+
+ /* Max number of blocks allowd in the queue */
+ u16 high_threshold;
+
+ /* Lowest memory blocks guaranteed for this queue */
+ u16 low_threshold;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+ struct acx_header header;
+
+ u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+ SLOT_TIME_LONG = 0,
+ SLOT_TIME_SHORT = 1,
+ DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+ MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+ struct acx_header header;
+
+ u8 wone_index; /* Reserved */
+ u8 slot_time;
+ u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX (8)
+#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct multicast_grp_addr_start {
+ struct acx_header header;
+
+ u8 enabled;
+ u8 num_groups;
+ u8 pad[2];
+ u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define RX_TIMEOUT_PS_POLL_MIN 0
+#define RX_TIMEOUT_PS_POLL_MAX (200000)
+#define RX_TIMEOUT_PS_POLL_DEF (15)
+#define RX_TIMEOUT_UPSD_MIN 0
+#define RX_TIMEOUT_UPSD_MAX (200000)
+#define RX_TIMEOUT_UPSD_DEF (15)
+
+struct acx_rx_timeout {
+ struct acx_header header;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a PS-poll has been
+ * transmitted.
+ */
+ u16 ps_poll_timeout;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a frame has been sent
+ * from an UPSD enabled queue.
+ */
+ u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN 0
+#define RTS_THRESHOLD_MAX 4096
+#define RTS_THRESHOLD_DEF 2347
+
+struct acx_rts_threshold {
+ struct acx_header header;
+
+ u16 threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+ struct acx_header header;
+
+ u8 enable;
+
+ /*
+ * The number of beacons without the unicast TIM
+ * bit set that the firmware buffers before
+ * signaling the host about ready frames.
+ * When set to 0 and the filter is enabled, beacons
+ * without the unicast TIM bit set are dropped.
+ */
+ u8 max_num_beacons;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ * 2 3 OUI
+ * 5 1 Type
+ * 6 2 Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define BEACON_FILTER_TABLE_MAX_IE_NUM (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+ BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+ (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+ BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+ struct acx_header header;
+
+ u8 num_ie;
+ u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+ u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+ SG_ENABLE = 0,
+ SG_DISABLE,
+ SG_SENSE_NO_ACTIVITY,
+ SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+ struct acx_header header;
+
+ /*
+ * 0 -> PTA enabled
+ * 1 -> PTA disabled
+ * 2 -> sense no active mode, i.e.
+ * an interrupt is sent upon
+ * BT activity.
+ * 3 -> PTA is switched on in response
+ * to the interrupt sending.
+ */
+ u8 enable;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF (0)
+#define PTA_BT_HP_MAXTIME_DEF (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF (1)
+#define PTA_AFH_LEVERAGE_ON_DEF (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
+#define PTA_MAX_NUM_CTS_DEF (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
+#define PTA_CYCLE_TIME_FAST_DEF (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF (5)
+#define PTA_ELP_HP_DEF (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
+#define PTA_ALLOW_PA_SD_DEF (1)
+#define PTA_TIME_BEFORE_BEACON_DEF (6300)
+#define PTA_HPDM_MAX_TIME_DEF (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF (0)
+#define PTA_BT_HP_RESPECTED_DEF (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF (24)
+#define PTA_ACK_MODE_DEF (1)
+
+struct acx_bt_wlan_coex_param {
+ struct acx_header header;
+
+ /*
+ * The minimum rate of a received WLAN packet in the STA,
+ * during protective mode, of which a new BT-HP request
+ * during this Rx will always be respected and gain the antenna.
+ */
+ u32 min_rate;
+
+ /* Max time the BT HP will be respected. */
+ u16 bt_hp_max_time;
+
+ /* Max time the WLAN HP will be respected. */
+ u16 wlan_hp_max_time;
+
+ /*
+ * The time between the last BT activity
+ * and the moment when the sense mode returns
+ * to SENSE_INACTIVE.
+ */
+ u16 sense_disable_timer;
+
+ /* Time before the next BT HP instance */
+ u16 rx_time_bt_hp;
+ u16 tx_time_bt_hp;
+
+ /* range: 10-20000 default: 1500 */
+ u16 rx_time_bt_hp_fast;
+ u16 tx_time_bt_hp_fast;
+
+ /* range: 2000-65535 default: 8700 */
+ u16 wlan_cycle_fast;
+
+ /* range: 0 - 15000 (Msec) default: 1000 */
+ u16 bt_anti_starvation_period;
+
+ /* range 400-10000(Usec) default: 3000 */
+ u16 next_bt_lp_packet;
+
+ /* Deafult: worst case for BT DH5 traffic */
+ u16 wake_up_beacon;
+
+ /* range: 0-50000(Usec) default: 1050 */
+ u16 hp_dm_max_guard_time;
+
+ /*
+ * This is to prevent both BT & WLAN antenna
+ * starvation.
+ * Range: 100-50000(Usec) default:2550
+ */
+ u16 next_wlan_packet;
+
+ /* 0 -> shared antenna */
+ u8 antenna_type;
+
+ /*
+ * 0 -> TI legacy
+ * 1 -> Palau
+ */
+ u8 signal_type;
+
+ /*
+ * BT AFH status
+ * 0 -> no AFH
+ * 1 -> from dedicated GPIO
+ * 2 -> AFH on (from host)
+ */
+ u8 afh_leverage_on;
+
+ /*
+ * The number of cycles during which no
+ * TX will be sent after 1 cycle of RX
+ * transaction in protective mode
+ */
+ u8 quiet_cycle_num;
+
+ /*
+ * The maximum number of CTSs that will
+ * be sent for receiving RX packet in
+ * protective mode
+ */
+ u8 max_cts;
+
+ /*
+ * The number of WLAN packets
+ * transferred in common mode before
+ * switching to BT.
+ */
+ u8 wlan_packets_num;
+
+ /*
+ * The number of BT packets
+ * transferred in common mode before
+ * switching to WLAN.
+ */
+ u8 bt_packets_num;
+
+ /* range: 1-255 default: 5 */
+ u8 missed_rx_avalanche;
+
+ /* range: 0-1 default: 1 */
+ u8 wlan_elp_hp;
+
+ /* range: 0 - 15 default: 4 */
+ u8 bt_anti_starvation_cycles;
+
+ u8 ack_mode_dual_ant;
+
+ /*
+ * Allow PA_SD assertion/de-assertion
+ * during enabled BT activity.
+ */
+ u8 pa_sd_enable;
+
+ /*
+ * Enable/Disable PTA in auto mode:
+ * Support Both Active & P.S modes
+ */
+ u8 pta_auto_mode_enable;
+
+ /* range: 0 - 20 default: 1 */
+ u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D 0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF
+
+struct acx_energy_detection {
+ struct acx_header header;
+
+ /* The RX Clear Channel Assessment threshold in the PHY */
+ u16 rx_cca_threshold;
+ u8 tx_energy_detection;
+ u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE 10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE 1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+ struct acx_header header;
+
+ u16 beacon_rx_timeout;
+ u16 broadcast_timeout;
+
+ /* Enables receiving of broadcast packets in PS mode */
+ u8 rx_broadcast_in_ps;
+
+ /* Consecutive PS Poll failures before updating the host */
+ u8 ps_poll_threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+ struct acx_header header;
+
+ u32 event_mask;
+ u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS BIT(2)
+#define CFG_RX_ALL_GOOD BIT(3)
+#define CFG_UNI_FILTER_EN BIT(4)
+#define CFG_BSSID_FILTER_EN BIT(5)
+#define CFG_MC_FILTER_EN BIT(6)
+#define CFG_MC_ADDR0_EN BIT(7)
+#define CFG_MC_ADDR1_EN BIT(8)
+#define CFG_BC_REJECT_EN BIT(9)
+#define CFG_SSID_FILTER_EN BIT(10)
+#define CFG_RX_INT_FCS_ERROR BIT(11)
+#define CFG_RX_INT_ENCRYPTED BIT(12)
+#define CFG_RX_WR_RX_STATUS BIT(13)
+#define CFG_RX_FILTER_NULTI BIT(14)
+#define CFG_RX_RESERVE BIT(15)
+#define CFG_RX_TIMESTAMP_TSF BIT(16)
+
+#define CFG_RX_RSV_EN BIT(0)
+#define CFG_RX_RCTS_ACK BIT(1)
+#define CFG_RX_PRSP_EN BIT(2)
+#define CFG_RX_PREQ_EN BIT(3)
+#define CFG_RX_MGMT_EN BIT(4)
+#define CFG_RX_FCS_ERROR BIT(5)
+#define CFG_RX_DATA_EN BIT(6)
+#define CFG_RX_CTL_EN BIT(7)
+#define CFG_RX_CF_EN BIT(8)
+#define CFG_RX_BCN_EN BIT(9)
+#define CFG_RX_AUTH_EN BIT(10)
+#define CFG_RX_ASSOC_EN BIT(11)
+
+#define SCAN_PASSIVE BIT(0)
+#define SCAN_5GHZ_BAND BIT(1)
+#define SCAN_TRIGGERED BIT(2)
+#define SCAN_PRIORITY_HIGH BIT(3)
+
+struct acx_fw_gen_frame_rates {
+ struct acx_header header;
+
+ u8 tx_ctrl_frame_rate; /* RATE_* */
+ u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+ u8 tx_mgt_frame_rate;
+ u8 tx_mgt_frame_mod;
+} __attribute__ ((packed));
+
+/* STA MAC */
+struct dot11_station_id {
+ struct acx_header header;
+
+ u8 mac[ETH_ALEN];
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE 0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE 0x80
+
+struct acx_feature_config {
+ struct acx_header header;
+
+ u32 options;
+ u32 data_flow_options;
+} __attribute__ ((packed));
+
+enum acx_key_action {
+ KEY_ADD_OR_REPLACE = 1,
+ KEY_REMOVE = 2,
+ KEY_SET_ID = 3,
+ MAX_KEY_ACTION = 0xffff,
+};
+
+enum acx_key_type {
+ KEY_WEP_DEFAULT = 0,
+ KEY_WEP_ADDR = 1,
+ KEY_AES_GROUP = 4,
+ KEY_AES_PAIRWISE = 5,
+ KEY_WEP_GROUP = 6,
+ KEY_TKIP_MIC_GROUP = 10,
+ KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e key size key format
+ * ---------- --------- ----------
+ * 0x00 5, 13, 29 Key data
+ * 0x01 5, 13, 29 Key data
+ * 0x04 16 16 bytes of key data
+ * 0x05 16 16 bytes of key data
+ * 0x0a 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ * 0x0b 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ *
+ */
+
+struct acx_set_key {
+ /* Ignored for default WEP key */
+ u8 addr[ETH_ALEN];
+
+ /* key_action_e */
+ u16 key_action;
+
+ u16 reserved_1;
+
+ /* key size in bytes */
+ u8 key_size;
+
+ /* key_type_e */
+ u8 key_type;
+ u8 ssid_profile;
+
+ /*
+ * TKIP, AES: frame's key id field.
+ * For WEP default key: key id;
+ */
+ u8 id;
+ u8 reserved_2[6];
+ u8 key[MAX_KEY_SIZE];
+ u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+ u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+ struct acx_header header;
+
+ u8 current_tx_power;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_dot11_default_key {
+ struct acx_header header;
+
+ u8 id;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+struct acx_tsf_info {
+ struct acx_header header;
+
+ u32 current_tsf_msb;
+ u32 current_tsf_lsb;
+ u32 last_TBTT_msb;
+ u32 last_TBTT_lsb;
+ u8 last_dtim_count;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+/* 802.11 PS */
+enum acx_ps_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE
+};
+
+struct acx_ps_params {
+ u8 ps_mode; /* STATION_* */
+ u8 send_null_data; /* Do we have to send NULL data packet ? */
+ u8 retries; /* Number of retires for the initial NULL data packet */
+
+ /*
+ * TUs during which the target stays awake after switching
+ * to power save mode.
+ */
+ u8 hang_over_period;
+ u16 null_data_rate;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+ WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/
+ WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/
+ WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */
+ WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */
+ WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+struct acx_wake_up_condition {
+ struct acx_header header;
+
+ u8 wake_up_event; /* Only one bit can be set */
+ u8 listen_interval;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+ struct acx_header header;
+
+ /*
+ * To be set when associated with an AP.
+ */
+ u16 aid;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+ ACX_PREAMBLE_LONG = 0,
+ ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+ struct acx_header header;
+ /*
+ * When set, the WiLink transmits the frames with a short preamble and
+ * when cleared, the WiLink transmits the frames with a long preamble.
+ */
+ u8 preamble;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+ CTSPROTECT_DISABLE = 0,
+ CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+ struct acx_header header;
+ u8 ctsprotect;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+ u32 internal_desc_overflow;
+} __attribute__ ((packed));
+
+struct acx_rx_statistics {
+ u32 out_of_mem;
+ u32 hdr_overflow;
+ u32 hw_stuck;
+ u32 dropped;
+ u32 fcs_err;
+ u32 xfr_hint_trig;
+ u32 path_reset;
+ u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+ u32 rx_requested;
+ u32 rx_errors;
+ u32 tx_requested;
+ u32 tx_errors;
+} __attribute__ ((packed));
+
+struct acx_isr_statistics {
+ /* host command complete */
+ u32 cmd_cmplt;
+
+ /* fiqisr() */
+ u32 fiqs;
+
+ /* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+ u32 rx_headers;
+
+ /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+ u32 rx_completes;
+
+ /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+ u32 rx_mem_overflow;
+
+ /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+ u32 rx_rdys;
+
+ /* irqisr() */
+ u32 irqs;
+
+ /* (INT_STS_ND & INT_TRIG_TX_PROC) */
+ u32 tx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+ u32 decrypt_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA0) */
+ u32 dma0_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA1) */
+ u32 dma1_done;
+
+ /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+ u32 tx_exch_complete;
+
+ /* (INT_STS_ND & INT_TRIG_COMMAND) */
+ u32 commands;
+
+ /* (INT_STS_ND & INT_TRIG_RX_PROC) */
+ u32 rx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_PM_802) */
+ u32 hw_pm_mode_changes;
+
+ /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+ u32 host_acknowledges;
+
+ /* (INT_STS_ND & INT_TRIG_PM_PCI) */
+ u32 pci_pm;
+
+ /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+ u32 wakeups;
+
+ /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+ u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+ /* WEP address keys configured */
+ u32 addr_key_count;
+
+ /* default keys configured */
+ u32 default_key_count;
+
+ u32 reserved;
+
+ /* number of times that WEP key not found on lookup */
+ u32 key_not_found;
+
+ /* number of times that WEP key decryption failed */
+ u32 decrypt_fail;
+
+ /* WEP packets decrypted */
+ u32 packets;
+
+ /* WEP decrypt interrupts */
+ u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+ /* the amount of enters into power save mode (both PD & ELP) */
+ u32 ps_enter;
+
+ /* the amount of enters into ELP mode */
+ u32 elp_enter;
+
+ /* the amount of missing beacon interrupts to the host */
+ u32 missing_bcns;
+
+ /* the amount of wake on host-access times */
+ u32 wake_on_host;
+
+ /* the amount of wake on timer-expire */
+ u32 wake_on_timer_exp;
+
+ /* the number of packets that were transmitted with PS bit set */
+ u32 tx_with_ps;
+
+ /* the number of packets that were transmitted with PS bit clear */
+ u32 tx_without_ps;
+
+ /* the number of received beacons */
+ u32 rcvd_beacons;
+
+ /* the number of entering into PowerOn (power save off) */
+ u32 power_save_off;
+
+ /* the number of entries into power save mode */
+ u16 enable_ps;
+
+ /*
+ * the number of exits from power save, not including failed PS
+ * transitions
+ */
+ u16 disable_ps;
+
+ /*
+ * the number of times the TSF counter was adjusted because
+ * of drift
+ */
+ u32 fix_tsf_ps;
+
+ /* Gives statistics about the spread continuous missed beacons.
+ * The 16 LSB are dedicated for the PS mode.
+ * The 16 MSB are dedicated for the PS mode.
+ * cont_miss_bcns_spread[0] - single missed beacon.
+ * cont_miss_bcns_spread[1] - two continuous missed beacons.
+ * cont_miss_bcns_spread[2] - three continuous missed beacons.
+ * ...
+ * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+ */
+ u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+ /* the number of beacons in awake mode */
+ u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+ u32 rx_pkts;
+ u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+ u32 encrypt_fail;
+ u32 decrypt_fail;
+ u32 encrypt_packets;
+ u32 decrypt_packets;
+ u32 encrypt_interrupt;
+ u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+ u32 heart_beat;
+ u32 calibration;
+ u32 rx_mismatch;
+ u32 rx_mem_empty;
+ u32 rx_pool;
+ u32 oom_late;
+ u32 phy_transmit_error;
+ u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+ u32 pspoll_timeouts;
+ u32 upsd_timeouts;
+ u32 upsd_max_sptime;
+ u32 upsd_max_apturn;
+ u32 pspoll_max_apturn;
+ u32 pspoll_utilization;
+ u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+ u32 rx_prep_beacon_drop;
+ u32 descr_host_int_trig_rx_data;
+ u32 beacon_buffer_thres_host_int_trig_rx_data;
+ u32 missed_beacon_host_int_trig_rx_data;
+ u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+ struct acx_header header;
+
+ struct acx_tx_statistics tx;
+ struct acx_rx_statistics rx;
+ struct acx_dma_statistics dma;
+ struct acx_isr_statistics isr;
+ struct acx_wep_statistics wep;
+ struct acx_pwr_statistics pwr;
+ struct acx_aes_statistics aes;
+ struct acx_mic_statistics mic;
+ struct acx_event_statistics event;
+ struct acx_ps_statistics ps;
+ struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+enum {
+ ACX_WAKE_UP_CONDITIONS = 0x0002,
+ ACX_MEM_CFG = 0x0003,
+ ACX_SLOT = 0x0004,
+ ACX_QUEUE_HEAD = 0x0005, /* for MASTER mode only */
+ ACX_AC_CFG = 0x0007,
+ ACX_MEM_MAP = 0x0008,
+ ACX_AID = 0x000A,
+ ACX_RADIO_PARAM = 0x000B, /* Not used */
+ ACX_CFG = 0x000C, /* Not used */
+ ACX_FW_REV = 0x000D,
+ ACX_MEDIUM_USAGE = 0x000F,
+ ACX_RX_CFG = 0x0010,
+ ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */
+ ACX_BSS_IN_PS = 0x0012, /* for AP only */
+ ACX_STATISTICS = 0x0013, /* Debug API */
+ ACX_FEATURE_CFG = 0x0015,
+ ACX_MISC_CFG = 0x0017, /* Not used */
+ ACX_TID_CFG = 0x001A,
+ ACX_BEACON_FILTER_OPT = 0x001F,
+ ACX_LOW_RSSI = 0x0020,
+ ACX_NOISE_HIST = 0x0021,
+ ACX_HDK_VERSION = 0x0022, /* ??? */
+ ACX_PD_THRESHOLD = 0x0023,
+ ACX_DATA_PATH_PARAMS = 0x0024, /* WO */
+ ACX_DATA_PATH_RESP_PARAMS = 0x0024, /* RO */
+ ACX_CCA_THRESHOLD = 0x0025,
+ ACX_EVENT_MBOX_MASK = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+ ACX_DTIM_PERIOD = 0x0027, /* for AP only */
+#else
+ ACX_WR_TBTT_AND_DTIM = 0x0027, /* STA only */
+#endif
+ ACX_ACI_OPTION_CFG = 0x0029, /* OBSOLETE (for 1251)*/
+ ACX_GPIO_CFG = 0x002A, /* Not used */
+ ACX_GPIO_SET = 0x002B, /* Not used */
+ ACX_PM_CFG = 0x002C, /* To Be Documented */
+ ACX_CONN_MONIT_PARAMS = 0x002D,
+ ACX_AVERAGE_RSSI = 0x002E, /* Not used */
+ ACX_CONS_TX_FAILURE = 0x002F,
+ ACX_BCN_DTIM_OPTIONS = 0x0031,
+ ACX_SG_ENABLE = 0x0032,
+ ACX_SG_CFG = 0x0033,
+ ACX_ANTENNA_DIVERSITY_CFG = 0x0035, /* To Be Documented */
+ ACX_LOW_SNR = 0x0037, /* To Be Documented */
+ ACX_BEACON_FILTER_TABLE = 0x0038,
+ ACX_ARP_IP_FILTER = 0x0039,
+ ACX_ROAMING_STATISTICS_TBL = 0x003B,
+ ACX_RATE_POLICY = 0x003D,
+ ACX_CTS_PROTECTION = 0x003E,
+ ACX_SLEEP_AUTH = 0x003F,
+ ACX_PREAMBLE_TYPE = 0x0040,
+ ACX_ERROR_CNT = 0x0041,
+ ACX_FW_GEN_FRAME_RATES = 0x0042,
+ ACX_IBSS_FILTER = 0x0044,
+ ACX_SERVICE_PERIOD_TIMEOUT = 0x0045,
+ ACX_TSF_INFO = 0x0046,
+ ACX_CONFIG_PS_WMM = 0x0049,
+ ACX_ENABLE_RX_DATA_FILTER = 0x004A,
+ ACX_SET_RX_DATA_FILTER = 0x004B,
+ ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+ ACX_POWER_LEVEL_TABLE = 0x004D,
+ ACX_BET_ENABLE = 0x0050,
+ DOT11_STATION_ID = 0x1001,
+ DOT11_RX_MSDU_LIFE_TIME = 0x1004,
+ DOT11_CUR_TX_PWR = 0x100D,
+ DOT11_DEFAULT_KEY = 0x1010,
+ DOT11_RX_DOT11_MODE = 0x1012,
+ DOT11_RTS_THRESHOLD = 0x1013,
+ DOT11_GROUP_ADDRESS_TBL = 0x1014,
+
+ MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+ MAX_IE = 0xFFFF
+};
+
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod);
+int wl12xx_acx_station_id(struct wl12xx *wl);
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id);
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval);
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth);
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len);
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power);
+int wl12xx_acx_feature_cfg(struct wl12xx *wl);
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len);
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+ struct acx_data_path_params_resp *data_path);
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time);
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_acx_pd_threshold(struct wl12xx *wl);
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time);
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl);
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl);
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold);
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl);
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl);
+int wl12xx_acx_sg_enable(struct wl12xx *wl);
+int wl12xx_acx_sg_cfg(struct wl12xx *wl);
+int wl12xx_acx_cca_threshold(struct wl12xx *wl);
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl);
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid);
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask);
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble);
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+ enum acx_ctsprotect_type ctsprotect);
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats);
+
+#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
new file mode 100644
index 000000000000..48ac08c429bd
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -0,0 +1,295 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "reg.h"
+#include "boot.h"
+#include "spi.h"
+#include "event.h"
+
+static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
+{
+ enable_irq(wl->irq);
+}
+
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
+{
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+ wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl)
+{
+ unsigned long timeout;
+ u32 boot_data;
+
+ /* perform soft reset */
+ wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+ /* SOFT_RESET is self clearing */
+ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+ while (1) {
+ boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+ wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+ if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ /* 1.2 check pWhalBus->uSelfClearTime if the
+ * timeout was reached */
+ wl12xx_error("soft reset timeout");
+ return -1;
+ }
+
+ udelay(SOFT_RESET_STALL_TIME);
+ }
+
+ /* disable Rx/Tx */
+ wl12xx_reg_write32(wl, ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
+
+ return 0;
+}
+
+int wl12xx_boot_init_seq(struct wl12xx *wl)
+{
+ u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+ /*
+ * col #1: INTEGER_DIVIDER
+ * col #2: FRACTIONAL_DIVIDER
+ * col #3: ATTN_BB
+ * col #4: ALPHA_BB
+ * col #5: STOP_TIME_BB
+ * col #6: BB_PLL_LOOP_FILTER
+ */
+ static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+ { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
+ { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+ { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+ { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+ { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
+ };
+
+ /* read NVS params */
+ scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
+ wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+ /* read ELP_CMD */
+ elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
+ wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+ /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+ ref_freq = scr_pad6 & 0x000000FF;
+ wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+ wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+ /*
+ * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+ */
+ wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+ /*
+ * set the clock detect feature to work in the restart wu procedure
+ * (ELP_CFG_MODE[14]) and Select the clock source type
+ * (ELP_CFG_MODE[13:12])
+ */
+ tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+ wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+ /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+ elp_cmd |= 0x00000040;
+ wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
+
+ /* PG 1.2: Set the BB PLL stable time to be 1000usec
+ * (PLL_STABLE_TIME) */
+ wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+ /* PG 1.2: read clock request time */
+ init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
+
+ /*
+ * PG 1.2: set the clock request time to be ref_clk_settling_time -
+ * 1ms = 4ms
+ */
+ if (init_data > 0x21)
+ tmp = init_data - 0x21;
+ else
+ tmp = 0;
+ wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+ /* set BB PLL configurations in RF AFE */
+ wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
+
+ /* set RF_AFE_REG_5 */
+ wl12xx_reg_write32(wl, 0x003058d4, 0x50);
+
+ /* set RF_AFE_CTRL_REG_2 */
+ wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
+
+ /*
+ * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+ * bais current(RF_AFE_REG_13)
+ */
+ wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
+
+ /* set BB PLL configurations */
+ tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+ wl12xx_reg_write32(wl, 0x00305840, tmp);
+
+ /* set fractional divider according to Appendix C-BB PLL
+ * Calculations
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+ wl12xx_reg_write32(wl, 0x00305844, tmp);
+
+ /* set the initial data for the sigma delta */
+ wl12xx_reg_write32(wl, 0x00305848, 0x3039);
+
+ /*
+ * set the accumulator attenuation value, calibration loop1
+ * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+ * the VCO gain
+ */
+ tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+ (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+ wl12xx_reg_write32(wl, 0x00305854, tmp);
+
+ /*
+ * set the calibration stop time after holdoff time expires and set
+ * settling time HOLD_OFF_TIME_BB
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+ wl12xx_reg_write32(wl, 0x00305858, tmp);
+
+ /*
+ * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+ * constant leakage current to linearize PFD to 0uA -
+ * BB_ILOOPF[7:3]
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+ wl12xx_reg_write32(wl, 0x003058f8, tmp);
+
+ /*
+ * set regulator output voltage for n divider to
+ * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+ * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+ * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+ */
+ wl12xx_reg_write32(wl, 0x003058f0, 0x29);
+
+ /* enable restart wakeup sequence (ELP_CMD[0]) */
+ wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+ /* restart sequence completed */
+ udelay(2000);
+
+ return 0;
+}
+
+int wl12xx_boot_run_firmware(struct wl12xx *wl)
+{
+ int loop, ret;
+ u32 chip_id, interrupt;
+
+ wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+ chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+ wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+ if (chip_id != wl->chip.id) {
+ wl12xx_error("chip id doesn't match after firmware boot");
+ return -EIO;
+ }
+
+ /* wait for init to complete */
+ loop = 0;
+ while (loop++ < INIT_LOOP) {
+ udelay(INIT_LOOP_DELAY);
+ interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+ if (interrupt == 0xffffffff) {
+ wl12xx_error("error reading hardware complete "
+ "init indication");
+ return -EIO;
+ }
+ /* check that ACX_INTR_INIT_COMPLETE is enabled */
+ else if (interrupt & wl->chip.intr_init_complete) {
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ wl->chip.intr_init_complete);
+ break;
+ }
+ }
+
+ if (loop >= INIT_LOOP) {
+ wl12xx_error("timeout waiting for the hardware to "
+ "complete initialization");
+ return -EIO;
+ }
+
+ /* get hardware config command mail box */
+ wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+ /* get hardware config event mail box */
+ wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+ /* set the working partition to its "running" mode offset */
+ wl12xx_set_partition(wl,
+ wl->chip.p_table[PART_WORK].mem.start,
+ wl->chip.p_table[PART_WORK].mem.size,
+ wl->chip.p_table[PART_WORK].reg.start,
+ wl->chip.p_table[PART_WORK].reg.size);
+
+ wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+ wl->cmd_box_addr, wl->event_box_addr);
+
+ /*
+ * in case of full asynchronous mode the firmware event must be
+ * ready to receive event from the command mailbox
+ */
+
+ /* enable gpio interrupts */
+ wl12xx_boot_enable_interrupts(wl);
+
+ wl->chip.op_target_enable_interrupts(wl);
+
+ /* unmask all mbox events */
+ wl->event_mask = 0xffffffff;
+
+ ret = wl12xx_event_unmask(wl);
+ if (ret < 0) {
+ wl12xx_error("EVENT mask setting failed");
+ return ret;
+ }
+
+ wl12xx_event_mbox_config(wl);
+
+ /* firmware startup completed */
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
new file mode 100644
index 000000000000..4fa73132baae
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl);
+int wl12xx_boot_init_seq(struct wl12xx *wl);
+int wl12xx_boot_run_firmware(struct wl12xx *wl);
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
new file mode 100644
index 000000000000..f73ab602b7ae
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -0,0 +1,353 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
+{
+ struct wl12xx_command cmd;
+ unsigned long timeout;
+ size_t cmd_len;
+ u32 intr;
+ int ret = 0;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.id = type;
+ cmd.status = 0;
+ memcpy(cmd.parameters, buf, buf_len);
+ cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+ timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ while (!(intr & wl->chip.intr_cmd_complete)) {
+ if (time_after(jiffies, timeout)) {
+ wl12xx_error("command complete timeout");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ msleep(1);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ }
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ wl->chip.intr_cmd_complete);
+
+out:
+ wl12xx_ps_elp_sleep(wl);
+
+ return ret;
+}
+
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
+{
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd test");
+
+ ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
+ if (ret < 0) {
+ wl12xx_warning("TEST command failed");
+ return ret;
+ }
+
+ if (answer) {
+ struct wl12xx_command *cmd_answer;
+
+ /*
+ * The test command got in, we can read the answer.
+ * The answer would be a wl12xx_command, where the
+ * parameter array contains the actual answer.
+ */
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+ wl12xx_ps_elp_sleep(wl);
+
+ cmd_answer = buf;
+ if (cmd_answer->status != CMD_STATUS_SUCCESS)
+ wl12xx_error("TEST command answer error: %d",
+ cmd_answer->status);
+ }
+
+ return 0;
+}
+
+
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+ void *answer)
+{
+ struct wl12xx_command *cmd;
+ struct acx_header header;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd interrogate");
+
+ header.id = ie_id;
+ header.len = ie_len - sizeof(header);
+
+ ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
+ if (ret < 0) {
+ wl12xx_error("INTERROGATE command failed");
+ return ret;
+ }
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ /* the interrogate command got in, we can read the answer */
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
+ CMDMBOX_HEADER_LEN + ie_len);
+
+ wl12xx_ps_elp_sleep(wl);
+
+ cmd = answer;
+ if (cmd->status != CMD_STATUS_SUCCESS)
+ wl12xx_error("INTERROGATE command error: %d",
+ cmd->status);
+
+ return 0;
+
+}
+
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
+{
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd configure");
+
+ ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
+ ie_len);
+ if (ret < 0) {
+ wl12xx_warning("CONFIGURE command NOK");
+ return ret;
+ }
+
+ return 0;
+
+}
+
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+ struct vbm_update_request vbm;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd vbm");
+
+ /* Count and period will be filled by the target */
+ vbm.tim.bitmap_ctrl = bitmap_control;
+ if (bitmap_len > PARTIAL_VBM_MAX) {
+ wl12xx_warning("cmd vbm len is %d B, truncating to %d",
+ bitmap_len, PARTIAL_VBM_MAX);
+ bitmap_len = PARTIAL_VBM_MAX;
+ }
+ memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
+ vbm.tim.identity = identity;
+ vbm.tim.length = bitmap_len + 3;
+
+ vbm.len = cpu_to_le16(bitmap_len + 5);
+
+ ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
+ if (ret < 0) {
+ wl12xx_error("VBM command failed");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
+{
+ int ret;
+ u16 cmd_rx, cmd_tx;
+
+ wl12xx_debug(DEBUG_CMD, "cmd data path");
+
+ if (enable) {
+ cmd_rx = CMD_ENABLE_RX;
+ cmd_tx = CMD_ENABLE_TX;
+ } else {
+ cmd_rx = CMD_DISABLE_RX;
+ cmd_tx = CMD_DISABLE_TX;
+ }
+
+ ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
+ if (ret < 0) {
+ wl12xx_error("rx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
+ if (ret < 0) {
+ wl12xx_error("tx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ return 0;
+}
+
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait)
+{
+ unsigned long timeout;
+ struct cmd_join join = {};
+ int ret, i;
+ u8 *bssid;
+
+ /* FIXME: this should be in main.c */
+ ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+ DEFAULT_HW_GEN_MODULATION_TYPE,
+ wl->tx_mgmt_frm_rate,
+ wl->tx_mgmt_frm_mod);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd join");
+
+ /* Reverse order BSSID */
+ bssid = (u8 *)&join.bssid_lsb;
+ for (i = 0; i < ETH_ALEN; i++)
+ bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+ join.rx_config_options = wl->rx_config;
+ join.rx_filter_options = wl->rx_filter;
+
+ join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+ RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+ join.beacon_interval = beacon_interval;
+ join.dtim_interval = dtim_interval;
+ join.bss_type = bss_type;
+ join.channel = wl->channel;
+ join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+ ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
+ if (ret < 0) {
+ wl12xx_error("failed to initiate cmd join");
+ return ret;
+ }
+
+ timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+ /*
+ * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+ * simplify locking we just sleep instead, for now
+ */
+ if (wait)
+ msleep(10);
+
+ return 0;
+}
+
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
+{
+ int ret;
+ struct acx_ps_params ps_params;
+
+ /* FIXME: this should be in ps.c */
+ ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
+ if (ret < 0) {
+ wl12xx_error("Couldnt set wake up conditions");
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
+
+ ps_params.ps_mode = ps_mode;
+ ps_params.send_null_data = 1;
+ ps_params.retries = 5;
+ ps_params.hang_over_period = 128;
+ ps_params.null_data_rate = 1; /* 1 Mbps */
+
+ ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
+ sizeof(ps_params));
+ if (ret < 0) {
+ wl12xx_error("cmd set_ps_mode failed");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
+{
+ struct cmd_read_write_memory mem_cmd, *mem_answer;
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd read memory");
+
+ memset(&mem_cmd, 0, sizeof(mem_cmd));
+ mem_cmd.addr = addr;
+ mem_cmd.size = len;
+
+ ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
+ if (ret < 0) {
+ wl12xx_error("read memory command failed: %d", ret);
+ return ret;
+ }
+
+ /* the read command got in, we can now read the answer */
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
+ CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
+
+ if (cmd.status != CMD_STATUS_SUCCESS)
+ wl12xx_error("error in read command result: %d", cmd.status);
+
+ mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
+ memcpy(answer, mem_answer->value, len);
+
+ return 0;
+}
+
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+ void *buf, size_t buf_len)
+{
+ struct wl12xx_cmd_packet_template template;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+ memset(&template, 0, sizeof(template));
+
+ WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
+ buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
+ template.size = cpu_to_le16(buf_len);
+
+ if (buf)
+ memcpy(template.template, buf, buf_len);
+
+ ret = wl12xx_cmd_send(wl, cmd_id, &template,
+ sizeof(template.size) + buf_len);
+ if (ret < 0) {
+ wl12xx_warning("cmd set_template failed: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
new file mode 100644
index 000000000000..aa307dcd081f
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -0,0 +1,265 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "wl12xx.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+ void *answer);
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len);
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable);
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait);
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer);
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+ void *buf, size_t buf_len);
+
+/* unit ms */
+#define WL12XX_COMMAND_TIMEOUT 2000
+
+#define WL12XX_MAX_TEMPLATE_SIZE 300
+
+struct wl12xx_cmd_packet_template {
+ __le16 size;
+ u8 template[WL12XX_MAX_TEMPLATE_SIZE];
+} __attribute__ ((packed));
+
+enum wl12xx_commands {
+ CMD_RESET = 0,
+ CMD_INTERROGATE = 1, /*use this to read information elements*/
+ CMD_CONFIGURE = 2, /*use this to write information elements*/
+ CMD_ENABLE_RX = 3,
+ CMD_ENABLE_TX = 4,
+ CMD_DISABLE_RX = 5,
+ CMD_DISABLE_TX = 6,
+ CMD_SCAN = 8,
+ CMD_STOP_SCAN = 9,
+ CMD_VBM = 10,
+ CMD_START_JOIN = 11,
+ CMD_SET_KEYS = 12,
+ CMD_READ_MEMORY = 13,
+ CMD_WRITE_MEMORY = 14,
+ CMD_BEACON = 19,
+ CMD_PROBE_RESP = 20,
+ CMD_NULL_DATA = 21,
+ CMD_PROBE_REQ = 22,
+ CMD_TEST = 23,
+ CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */
+ CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */
+ CMD_NOISE_HIST = 28,
+ CMD_RX_RESET = 29,
+ CMD_PS_POLL = 30,
+ CMD_QOS_NULL_DATA = 31,
+ CMD_LNA_CONTROL = 32,
+ CMD_SET_BCN_MODE = 33,
+ CMD_MEASUREMENT = 34,
+ CMD_STOP_MEASUREMENT = 35,
+ CMD_DISCONNECT = 36,
+ CMD_SET_PS_MODE = 37,
+ CMD_CHANNEL_SWITCH = 38,
+ CMD_STOP_CHANNEL_SWICTH = 39,
+ CMD_AP_DISCOVERY = 40,
+ CMD_STOP_AP_DISCOVERY = 41,
+ CMD_SPS_SCAN = 42,
+ CMD_STOP_SPS_SCAN = 43,
+ CMD_HEALTH_CHECK = 45,
+ CMD_DEBUG = 46,
+ CMD_TRIGGER_SCAN_TO = 47,
+
+ NUM_COMMANDS,
+ MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct wl12xx_command {
+ u16 id;
+ u16 status;
+ u8 parameters[MAX_CMD_PARAMS];
+};
+
+enum {
+ CMD_MAILBOX_IDLE = 0,
+ CMD_STATUS_SUCCESS = 1,
+ CMD_STATUS_UNKNOWN_CMD = 2,
+ CMD_STATUS_UNKNOWN_IE = 3,
+ CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
+ CMD_STATUS_RX_BUSY = 13,
+ CMD_STATUS_INVALID_PARAM = 14,
+ CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
+ CMD_STATUS_OUT_OF_MEMORY = 16,
+ CMD_STATUS_STA_TABLE_FULL = 17,
+ CMD_STATUS_RADIO_ERROR = 18,
+ CMD_STATUS_WRONG_NESTING = 19,
+ CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
+ CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
+ MAX_COMMAND_STATUS = 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+ /* The address of the memory to read from or write to.*/
+ u32 addr;
+
+ /* The amount of data in bytes to read from or write to the WiLink
+ * device.*/
+ u32 size;
+
+ /* The actual value read from or written to the Wilink. The source
+ of this field is the Host in WRITE command or the Wilink in READ
+ command. */
+ u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+
+struct basic_scan_parameters {
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * Scan options:
+ * bit 0: When this bit is set, passive scan.
+ * bit 1: Band, when this bit is set we scan
+ * in the 5Ghz band.
+ * bit 2: voice mode, 0 for normal scan.
+ * bit 3: scan priority, 1 for high priority.
+ */
+ u16 scan_options;
+
+ /* Number of channels to scan */
+ u8 num_channels;
+
+ /* Number opf probe requests to send, per channel */
+ u8 num_probe_requests;
+
+ /* Rate and modulation for probe requests */
+ u16 tx_rate;
+
+ u8 tid_trigger;
+ u8 ssid_len;
+ u32 ssid[8];
+
+} __attribute__ ((packed));
+
+struct basic_scan_channel_parameters {
+ u32 min_duration; /* in TU */
+ u32 max_duration; /* in TU */
+ u32 bssid_lsb;
+ u16 bssid_msb;
+
+ /*
+ * bits 0-3: Early termination count.
+ * bits 4-5: Early termination condition.
+ */
+ u8 early_termination;
+
+ u8 tx_power_att;
+ u8 channel;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct cmd_scan {
+ struct basic_scan_parameters params;
+ struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __attribute__ ((packed));
+
+enum {
+ BSS_TYPE_IBSS = 0,
+ BSS_TYPE_STA_BSS = 2,
+ BSS_TYPE_AP_BSS = 3,
+ MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+ u32 bssid_lsb;
+ u16 bssid_msb;
+ u16 beacon_interval; /* in TBTTs */
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * The target uses this field to determine the rate at
+ * which to transmit control frame responses (such as
+ * ACK or CTS frames).
+ */
+ u16 basic_rate_set;
+ u8 dtim_interval;
+ u8 tx_ctrl_frame_rate; /* OBSOLETE */
+ u8 tx_ctrl_frame_mod; /* OBSOLETE */
+ /*
+ * bits 0-2: This bitwise field specifies the type
+ * of BSS to start or join (BSS_TYPE_*).
+ * bit 4: Band - The radio band in which to join
+ * or start.
+ * 0 - 2.4GHz band
+ * 1 - 5GHz band
+ * bits 3, 5-7: Reserved
+ */
+ u8 bss_type;
+ u8 channel;
+ u8 ssid_len;
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ u8 ctrl; /* JOIN_CMD_CTRL_* */
+ u8 tx_mgt_frame_rate; /* OBSOLETE */
+ u8 tx_mgt_frame_mod; /* OBSOLETE */
+ u8 reserved;
+} __attribute__ ((packed));
+
+
+#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
new file mode 100644
index 000000000000..cdb368ce4dae
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -0,0 +1,508 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+/* ms */
+#define WL12XX_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \
+static ssize_t name## _read(struct file *file, char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl12xx *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", ##value); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations name## _ops = { \
+ .read = name## _read, \
+ .open = wl12xx_open_file_generic, \
+};
+
+#define DEBUGFS_ADD(name, parent) \
+ wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \
+ wl, &name## _ops); \
+ if (IS_ERR(wl->debugfs.name)) { \
+ ret = PTR_ERR(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ goto out; \
+ }
+
+#define DEBUGFS_DEL(name) \
+ do { \
+ debugfs_remove(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ } while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \
+static ssize_t sub## _ ##name## _read(struct file *file, \
+ char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl12xx *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ wl12xx_debugfs_update_stats(wl); \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", \
+ wl->stats.fw_stats->sub.name); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations sub## _ ##name## _ops = { \
+ .read = sub## _ ##name## _read, \
+ .open = wl12xx_open_file_generic, \
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name) \
+ DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name) \
+ DEBUGFS_DEL(sub## _ ##name)
+
+static void wl12xx_debugfs_update_stats(struct wl12xx *wl)
+{
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL12XX_STATE_ON &&
+ time_after(jiffies, wl->stats.fw_stats_update +
+ msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) {
+ wl12xx_acx_statistics(wl, wl->stats.fw_stats);
+ wl->stats.fw_stats_update = jiffies;
+ }
+
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+ 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+ wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct wl12xx *wl = file->private_data;
+ u32 queue_len;
+ char buf[20];
+ int res;
+
+ queue_len = skb_queue_len(&wl->tx_queue);
+
+ res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+ .read = tx_queue_len_read,
+ .open = wl12xx_open_file_generic,
+};
+
+static void wl12xx_debugfs_delete_files(struct wl12xx *wl)
+{
+ DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+ DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+ DEBUGFS_FWSTATS_DEL(rx, dropped);
+ DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+ DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_DEL(rx, path_reset);
+ DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+ DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_DEL(isr, fiqs);
+ DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+ DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+ DEBUGFS_FWSTATS_DEL(isr, irqs);
+ DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+ DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_DEL(isr, commands);
+ DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+ DEBUGFS_FWSTATS_DEL(isr, wakeups);
+ DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+ DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+ DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(wep, packets);
+ DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+ DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+ DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+ DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_DEL(event, heart_beat);
+ DEBUGFS_FWSTATS_DEL(event, calibration);
+ DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+ DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_DEL(event, rx_pool);
+ DEBUGFS_FWSTATS_DEL(event, oom_late);
+ DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_DEL(tx_queue_len);
+ DEBUGFS_DEL(retry_count);
+ DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl12xx_debugfs_add_files(struct wl12xx *wl)
+{
+ int ret = 0;
+
+ DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+ DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+ DEBUGFS_FWSTATS_ADD(rx, dropped);
+ DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+ DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_ADD(rx, path_reset);
+ DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+ DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_ADD(isr, fiqs);
+ DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+ DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+ DEBUGFS_FWSTATS_ADD(isr, irqs);
+ DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+ DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_ADD(isr, commands);
+ DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+ DEBUGFS_FWSTATS_ADD(isr, wakeups);
+ DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+ DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+ DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(wep, packets);
+ DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+ DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+ DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+ DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_ADD(event, heart_beat);
+ DEBUGFS_FWSTATS_ADD(event, calibration);
+ DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+ DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_ADD(event, rx_pool);
+ DEBUGFS_FWSTATS_ADD(event, oom_late);
+ DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+ DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+ DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+ if (ret < 0)
+ wl12xx_debugfs_delete_files(wl);
+
+ return ret;
+}
+
+void wl12xx_debugfs_reset(struct wl12xx *wl)
+{
+ memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+ wl->stats.retry_count = 0;
+ wl->stats.excessive_retries = 0;
+}
+
+int wl12xx_debugfs_init(struct wl12xx *wl)
+{
+ int ret;
+
+ wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ if (IS_ERR(wl->debugfs.rootdir)) {
+ ret = PTR_ERR(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+ goto err;
+ }
+
+ wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+ wl->debugfs.rootdir);
+
+ if (IS_ERR(wl->debugfs.fw_statistics)) {
+ ret = PTR_ERR(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+ goto err_root;
+ }
+
+ wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+ GFP_KERNEL);
+
+ if (!wl->stats.fw_stats) {
+ ret = -ENOMEM;
+ goto err_fw;
+ }
+
+ wl->stats.fw_stats_update = jiffies;
+
+ ret = wl12xx_debugfs_add_files(wl);
+
+ if (ret < 0)
+ goto err_file;
+
+ return 0;
+
+err_file:
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+err_fw:
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+err_root:
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+err:
+ return ret;
+}
+
+void wl12xx_debugfs_exit(struct wl12xx *wl)
+{
+ wl12xx_debugfs_delete_files(wl);
+
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
new file mode 100644
index 000000000000..562cdcbcc874
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL12XX_DEBUGFS_H
+#define WL12XX_DEBUGFS_H
+
+#include "wl12xx.h"
+
+int wl12xx_debugfs_init(struct wl12xx *wl);
+void wl12xx_debugfs_exit(struct wl12xx *wl);
+void wl12xx_debugfs_reset(struct wl12xx *wl);
+
+#endif /* WL12XX_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
new file mode 100644
index 000000000000..99529ca89a7e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -0,0 +1,127 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "event.h"
+#include "ps.h"
+
+static int wl12xx_event_scan_complete(struct wl12xx *wl,
+ struct event_mailbox *mbox)
+{
+ wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+ mbox->scheduled_scan_status,
+ mbox->scheduled_scan_channels);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, false);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ return 0;
+}
+
+static void wl12xx_event_mbox_dump(struct event_mailbox *mbox)
+{
+ wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:");
+ wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+ wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox)
+{
+ int ret;
+ u32 vector;
+
+ wl12xx_event_mbox_dump(mbox);
+
+ vector = mbox->events_vector & ~(mbox->events_mask);
+ wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+ if (vector & SCAN_COMPLETE_EVENT_ID) {
+ ret = wl12xx_event_scan_complete(wl, mbox);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vector & BSS_LOSE_EVENT_ID) {
+ wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+ if (wl->psm_requested && wl->psm) {
+ ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int wl12xx_event_unmask(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl12xx_event_mbox_config(struct wl12xx *wl)
+{
+ wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+ wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+ wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+ wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num)
+{
+ struct event_mailbox mbox;
+ int ret;
+
+ wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+ if (mbox_num > 1)
+ return -EINVAL;
+
+ /* first we read the mbox descriptor */
+ wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+ sizeof(struct event_mailbox));
+
+ /* process the descriptor */
+ ret = wl12xx_event_process(wl, &mbox);
+ if (ret < 0)
+ return ret;
+
+ /* then we let the firmware know it can go on...*/
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
new file mode 100644
index 000000000000..1f4c2f7438a7
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_EVENT_H__
+#define __WL12XX_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+ RESERVED1_EVENT_ID = BIT(0),
+ RESERVED2_EVENT_ID = BIT(1),
+ MEASUREMENT_START_EVENT_ID = BIT(2),
+ SCAN_COMPLETE_EVENT_ID = BIT(3),
+ CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
+ ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
+ PS_REPORT_EVENT_ID = BIT(6),
+ SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
+ HEALTH_REPORT_EVENT_ID = BIT(8),
+ ACI_DETECTION_EVENT_ID = BIT(9),
+ DEBUG_REPORT_EVENT_ID = BIT(10),
+ MAC_STATUS_EVENT_ID = BIT(11),
+ DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
+ JOIN_EVENT_COMPLETE_ID = BIT(13),
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
+ BSS_LOSE_EVENT_ID = BIT(15),
+ ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
+ MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
+ AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
+ SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
+ PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
+ RESET_BSS_EVENT_ID = BIT(21),
+ REGAINED_BSS_EVENT_ID = BIT(22),
+ ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
+ ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
+ ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
+
+ DBG_EVENT_ID = BIT(26),
+ BT_PTA_SENSE_EVENT_ID = BIT(27),
+ BT_PTA_PREDICTION_EVENT_ID = BIT(28),
+ BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
+
+ PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
+
+ EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
+};
+
+struct event_debug_report {
+ u8 debug_event_id;
+ u8 num_params;
+ u16 pad;
+ u32 report_1;
+ u32 report_2;
+ u32 report_3;
+} __attribute__ ((packed));
+
+struct event_mailbox {
+ u32 events_vector;
+ u32 events_mask;
+ u32 reserved_1;
+ u32 reserved_2;
+
+ char average_rssi_level;
+ u8 ps_status;
+ u8 channel_switch_status;
+ u8 scheduled_scan_status;
+
+ /* Channels scanned by the scheduled scan */
+ u16 scheduled_scan_channels;
+
+ /* If bit 0 is set -> target's fatal error */
+ u16 health_report;
+ u16 bad_fft_counter;
+ u8 bt_pta_sense_info;
+ u8 bt_pta_protective_info;
+ u32 reserved;
+ u32 debug_report[2];
+
+ /* Number of FCS errors since last event */
+ u32 fcs_err_counter;
+
+ struct event_debug_report report;
+ u8 average_snr_level;
+ u8 padding[19];
+} __attribute__ ((packed));
+
+int wl12xx_event_unmask(struct wl12xx *wl);
+void wl12xx_event_mbox_config(struct wl12xx *wl);
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
new file mode 100644
index 000000000000..2a573a6010bd
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "init.h"
+#include "wl12xx_80211.h"
+#include "acx.h"
+#include "cmd.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_feature_cfg(wl);
+ if (ret < 0) {
+ wl12xx_warning("couldn't set feature config");
+ return ret;
+ }
+
+ ret = wl12xx_acx_default_key(wl, wl->default_key);
+ if (ret < 0) {
+ wl12xx_warning("couldn't set default key");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_hw_init_templates_config(struct wl12xx *wl)
+{
+ int ret;
+ u8 partial_vbm[PARTIAL_VBM_MAX];
+
+ /* send empty templates for fw memory reservation */
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+ sizeof(struct wl12xx_probe_req_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+ sizeof(struct wl12xx_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL,
+ sizeof(struct wl12xx_ps_poll_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+ sizeof
+ (struct wl12xx_qos_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+ sizeof
+ (struct wl12xx_probe_resp_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL,
+ sizeof
+ (struct wl12xx_beacon_template));
+ if (ret < 0)
+ return ret;
+
+ /* tim templates, first reserve space then allocate an empty one */
+ memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+ ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+ int ret;
+
+ ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_rx_config(wl, config, filter);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_phy_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_pd_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_group_address_tbl(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_service_period_timeout(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_beacon_filter_opt(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_beacon_filter_table(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_pta(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_sg_enable(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_sg_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_cca_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_bcn_dtim_options(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_power_auth(struct wl12xx *wl)
+{
+ return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+}
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
new file mode 100644
index 000000000000..c8b6cd0b7c3e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_INIT_H__
+#define __WL12XX_INIT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl);
+int wl12xx_hw_init_templates_config(struct wl12xx *wl);
+int wl12xx_hw_init_mem_config(struct wl12xx *wl);
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_hw_init_phy_config(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl);
+int wl12xx_hw_init_pta(struct wl12xx *wl);
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl);
+int wl12xx_hw_init_power_auth(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
new file mode 100644
index 000000000000..744f4ce5993b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -0,0 +1,1358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "wl1251.h"
+#include "spi.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+
+static void wl12xx_disable_interrupts(struct wl12xx *wl)
+{
+ disable_irq(wl->irq);
+}
+
+static void wl12xx_power_off(struct wl12xx *wl)
+{
+ wl->set_power(false);
+}
+
+static void wl12xx_power_on(struct wl12xx *wl)
+{
+ wl->set_power(true);
+}
+
+static irqreturn_t wl12xx_irq(int irq, void *cookie)
+{
+ struct wl12xx *wl;
+
+ wl12xx_debug(DEBUG_IRQ, "IRQ");
+
+ wl = cookie;
+
+ schedule_work(&wl->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int wl12xx_fetch_firmware(struct wl12xx *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl12xx_error("could not get firmware: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl12xx_error("firmware size is not multiple of 32 bits: %d",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->fw_len = fw->size;
+ wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+ if (!wl->fw) {
+ wl12xx_error("could not allocate memory for the firmware");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->fw, fw->data, wl->fw_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static int wl12xx_fetch_nvs(struct wl12xx *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl12xx_error("could not get nvs file: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl12xx_error("nvs size is not multiple of 32 bits: %d",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->nvs_len = fw->size;
+ wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+ if (!wl->nvs) {
+ wl12xx_error("could not allocate memory for the nvs file");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static void wl12xx_fw_wakeup(struct wl12xx *wl)
+{
+ u32 elp_reg;
+
+ elp_reg = ELPCTRL_WAKE_UP;
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ if (!(elp_reg & ELPCTRL_WLAN_READY)) {
+ wl12xx_warning("WLAN not ready");
+ elp_reg = ELPCTRL_WAKE_UP_WLAN_READY;
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ }
+}
+
+static int wl12xx_chip_wakeup(struct wl12xx *wl)
+{
+ int ret = 0;
+
+ wl12xx_power_on(wl);
+ msleep(wl->chip.power_on_sleep);
+ wl12xx_spi_reset(wl);
+ wl12xx_spi_init(wl);
+
+ /* We don't need a real memory partition here, because we only want
+ * to use the registers at this point. */
+ wl12xx_set_partition(wl,
+ 0x00000000,
+ 0x00000000,
+ REGISTERS_BASE,
+ REGISTERS_DOWN_SIZE);
+
+ /* ELP module wake up */
+ wl12xx_fw_wakeup(wl);
+
+ /* whal_FwCtrl_BootSm() */
+
+ /* 0. read chip id from CHIP_ID */
+ wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+ /* 1. check if chip id is valid */
+
+ switch (wl->chip.id) {
+ case CHIP_ID_1251_PG12:
+ wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+ wl->chip.id);
+
+ wl1251_setup(wl);
+
+ break;
+ case CHIP_ID_1271_PG10:
+ case CHIP_ID_1251_PG10:
+ case CHIP_ID_1251_PG11:
+ default:
+ wl12xx_error("unsupported chip id: 0x%x", wl->chip.id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (wl->fw == NULL) {
+ ret = wl12xx_fetch_firmware(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* No NVS from netlink, try to get it from the filesystem */
+ if (wl->nvs == NULL) {
+ ret = wl12xx_fetch_nvs(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void wl12xx_filter_work(struct work_struct *work)
+{
+ struct wl12xx *wl =
+ container_of(work, struct wl12xx, filter_work);
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL12XX_STATE_OFF)
+ goto out;
+
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0)
+ goto out;
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+int wl12xx_plt_start(struct wl12xx *wl)
+{
+ int ret;
+
+ wl12xx_notice("power up");
+
+ if (wl->state != WL12XX_STATE_OFF) {
+ wl12xx_error("cannot go into PLT state because not "
+ "in off state: %d", wl->state);
+ return -EBUSY;
+ }
+
+ wl->state = WL12XX_STATE_PLT;
+
+ ret = wl12xx_chip_wakeup(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl->chip.op_boot(wl);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+
+ ret = wl->chip.op_plt_init(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_plt_stop(struct wl12xx *wl)
+{
+ wl12xx_notice("power down");
+
+ if (wl->state != WL12XX_STATE_PLT) {
+ wl12xx_error("cannot power down because not in PLT "
+ "state: %d", wl->state);
+ return -EBUSY;
+ }
+
+ wl12xx_disable_interrupts(wl);
+ wl12xx_power_off(wl);
+
+ wl->state = WL12XX_STATE_OFF;
+
+ return 0;
+}
+
+
+static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct wl12xx *wl = hw->priv;
+
+ skb_queue_tail(&wl->tx_queue, skb);
+
+ schedule_work(&wl->tx_work);
+
+ /*
+ * The workqueue is slow to process the tx_queue and we need stop
+ * the queue here, otherwise the queue will get too long.
+ */
+ if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) {
+ ieee80211_stop_queues(wl->hw);
+
+ /*
+ * FIXME: this is racy, the variable is not properly
+ * protected. Maybe fix this by removing the stupid
+ * variable altogether and checking the real queue state?
+ */
+ wl->tx_queue_stopped = true;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int wl12xx_op_start(struct ieee80211_hw *hw)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 start");
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state != WL12XX_STATE_OFF) {
+ wl12xx_error("cannot start because not in off state: %d",
+ wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ret = wl12xx_chip_wakeup(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl->chip.op_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl->chip.op_hw_init(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+
+ wl->state = WL12XX_STATE_ON;
+
+ wl12xx_info("firmware booted (%s)", wl->chip.fw_ver);
+
+out:
+ if (ret < 0)
+ wl12xx_power_off(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl12xx_op_stop(struct ieee80211_hw *hw)
+{
+ struct wl12xx *wl = hw->priv;
+
+ wl12xx_info("down");
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 stop");
+
+ mutex_lock(&wl->mutex);
+
+ WARN_ON(wl->state != WL12XX_STATE_ON);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, true);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ wl->state = WL12XX_STATE_OFF;
+
+ wl12xx_disable_interrupts(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&wl->irq_work);
+ cancel_work_sync(&wl->tx_work);
+ cancel_work_sync(&wl->filter_work);
+
+ mutex_lock(&wl->mutex);
+
+ /* let's notify MAC80211 about the remaining pending TX frames */
+ wl12xx_tx_flush(wl);
+
+ wl12xx_power_off(wl);
+
+ memset(wl->bssid, 0, ETH_ALEN);
+ wl->listen_int = 1;
+ wl->bss_type = MAX_BSS_TYPE;
+
+ wl->data_in_count = 0;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->next_tx_complete = 0;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+ wl12xx_debugfs_reset(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct wl12xx *wl = hw->priv;
+ DECLARE_MAC_BUF(mac);
+ int ret = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
+ conf->type, print_mac(mac, conf->mac_addr));
+
+ mutex_lock(&wl->mutex);
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_STATION:
+ wl->bss_type = BSS_TYPE_STA_BSS;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ wl->bss_type = BSS_TYPE_IBSS;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
+ memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+ ret = wl12xx_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static void wl12xx_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+static int wl12xx_build_null_data(struct wl12xx *wl)
+{
+ struct wl12xx_null_data_template template;
+
+ if (!is_zero_ether_addr(wl->bssid)) {
+ memcpy(template.header.da, wl->bssid, ETH_ALEN);
+ memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+ } else {
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ }
+
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC);
+
+ return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template,
+ sizeof(template));
+
+}
+
+static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid)
+{
+ struct wl12xx_ps_poll_template template;
+
+ memcpy(template.bssid, wl->bssid, ETH_ALEN);
+ memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+ template.aid = aid;
+ template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+ return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template,
+ sizeof(template));
+
+}
+
+static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct wl12xx *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int channel, ret = 0;
+
+ channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ channel,
+ conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+ conf->power_level);
+
+ mutex_lock(&wl->mutex);
+
+ if (channel != wl->channel) {
+ /* FIXME: use beacon interval provided by mac80211 */
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0)
+ goto out;
+
+ wl->channel = channel;
+ }
+
+ ret = wl12xx_build_null_data(wl);
+ if (ret < 0)
+ goto out;
+
+ if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+ wl12xx_info("psm enabled");
+
+ wl->psm_requested = true;
+
+ /*
+ * We enter PSM only if we're already associated.
+ * If we're not, we'll enter it when joining an SSID,
+ * through the bss_info_changed() hook.
+ */
+ ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ } else if (!(conf->flags & IEEE80211_CONF_PS) &&
+ wl->psm_requested) {
+ wl12xx_info("psm disabled");
+
+ wl->psm_requested = false;
+
+ if (wl->psm)
+ ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ }
+
+ if (conf->power_level != wl->power_level) {
+ ret = wl12xx_acx_tx_power(wl, conf->power_level);
+ if (ret < 0)
+ goto out;
+
+ wl->power_level = conf->power_level;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_FCSFAIL | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_CONTROL | \
+ FIF_OTHER_BSS)
+
+static void wl12xx_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed,
+ unsigned int *total,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct wl12xx *wl = hw->priv;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+ *total &= WL12XX_SUPPORTED_FILTERS;
+ changed &= WL12XX_SUPPORTED_FILTERS;
+
+ if (changed == 0)
+ /* no filters which we support changed */
+ return;
+
+ /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+ wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+
+ if (*total & FIF_PROMISC_IN_BSS) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ wl->rx_config |= CFG_RX_ALL_GOOD;
+ }
+ if (*total & FIF_ALLMULTI)
+ /*
+ * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+ * all multicast frames
+ */
+ wl->rx_config &= ~CFG_MC_FILTER_EN;
+ if (*total & FIF_FCSFAIL)
+ wl->rx_filter |= CFG_RX_FCS_ERROR;
+ if (*total & FIF_BCN_PRBRESP_PROMISC) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (*total & FIF_CONTROL)
+ wl->rx_filter |= CFG_RX_CTL_EN;
+ if (*total & FIF_OTHER_BSS)
+ wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+ /*
+ * FIXME: workqueues need to be properly cancelled on stop(), for
+ * now let's just disable changing the filter settings. They will
+ * be updated any on config().
+ */
+ /* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key,
+ enum set_key_cmd cmd,
+ struct ieee80211_key_conf *mac80211_key,
+ const u8 *addr)
+{
+ switch (mac80211_key->alg) {
+ case ALG_WEP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_WEP_DEFAULT;
+ else
+ key->key_type = KEY_WEP_ADDR;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_TKIP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_TKIP_MIC_GROUP;
+ else
+ key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_CCMP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_AES_GROUP;
+ else
+ key->key_type = KEY_AES_PAIRWISE;
+ mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ break;
+ default:
+ wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg);
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct wl12xx *wl = hw->priv;
+ struct acx_set_key wl_key;
+ const u8 *addr;
+ int ret;
+
+ static const u8 bcast_addr[ETH_ALEN] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 set key");
+
+ memset(&wl_key, 0, sizeof(wl_key));
+
+ addr = sta ? sta->addr : bcast_addr;
+
+ wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+ wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+ wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+ key->alg, key->keyidx, key->keylen, key->flags);
+ wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+ mutex_lock(&wl->mutex);
+
+ switch (cmd) {
+ case SET_KEY:
+ wl_key.key_action = KEY_ADD_OR_REPLACE;
+ break;
+ case DISABLE_KEY:
+ wl_key.key_action = KEY_REMOVE;
+ break;
+ default:
+ wl12xx_error("Unsupported key cmd 0x%x", cmd);
+ break;
+ }
+
+ ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr);
+ if (ret < 0) {
+ wl12xx_error("Set KEY type failed");
+ goto out;
+ }
+
+ if (wl_key.key_type != KEY_WEP_DEFAULT)
+ memcpy(wl_key.addr, addr, ETH_ALEN);
+
+ if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) ||
+ (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) {
+ /*
+ * We get the key in the following form:
+ * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+ * but the target is expecting:
+ * TKIP - RX MIC - TX MIC
+ */
+ memcpy(wl_key.key, key->key, 16);
+ memcpy(wl_key.key + 16, key->key + 24, 8);
+ memcpy(wl_key.key + 24, key->key + 16, 8);
+
+ } else {
+ memcpy(wl_key.key, key->key, key->keylen);
+ }
+ wl_key.key_size = key->keylen;
+
+ wl_key.id = key->keyidx;
+ wl_key.ssid_profile = 0;
+
+ wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key));
+
+ if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) {
+ wl12xx_error("Set KEY failed");
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static int wl12xx_build_basic_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+ return index;
+}
+
+static int wl12xx_build_extended_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_OFDM_RATE_6MB;
+ rates[index++] = IEEE80211_OFDM_RATE_9MB;
+ rates[index++] = IEEE80211_OFDM_RATE_12MB;
+ rates[index++] = IEEE80211_OFDM_RATE_18MB;
+ rates[index++] = IEEE80211_OFDM_RATE_24MB;
+ rates[index++] = IEEE80211_OFDM_RATE_36MB;
+ rates[index++] = IEEE80211_OFDM_RATE_48MB;
+ rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+ return index;
+}
+
+
+static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len)
+{
+ struct wl12xx_probe_req_template template;
+ struct wl12xx_ie_rates *rates;
+ char *ptr;
+ u16 size;
+
+ ptr = (char *)&template;
+ size = sizeof(struct ieee80211_header);
+
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+ /* IEs */
+ /* SSID */
+ template.ssid.header.id = WLAN_EID_SSID;
+ template.ssid.header.len = ssid_len;
+ if (ssid_len && ssid)
+ memcpy(template.ssid.ssid, ssid, ssid_len);
+ size += sizeof(struct wl12xx_ie_header) + ssid_len;
+ ptr += size;
+
+ /* Basic Rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_SUPP_RATES;
+ rates->header.len = wl12xx_build_basic_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+ ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ /* Extended rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+ rates->header.len = wl12xx_build_extended_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+ return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template,
+ size);
+}
+
+static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len,
+ u8 active_scan, u8 high_prio, u8 num_channels,
+ u8 probe_requests)
+{
+ int i, ret;
+ u32 split_scan = 0;
+ u16 scan_options = 0;
+ struct cmd_scan *params;
+ struct wl12xx_command *cmd_answer;
+
+ if (wl->scanning)
+ return -EINVAL;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+ params->params.rx_filter_options =
+ cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+ /* High priority scan */
+ if (!active_scan)
+ scan_options |= SCAN_PASSIVE;
+ if (high_prio)
+ scan_options |= SCAN_PRIORITY_HIGH;
+ params->params.scan_options = scan_options;
+
+ params->params.num_channels = num_channels;
+ params->params.num_probe_requests = probe_requests;
+ params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+ params->params.tid_trigger = 0;
+
+ for (i = 0; i < num_channels; i++) {
+ params->channels[i].min_duration = cpu_to_le32(30000);
+ params->channels[i].max_duration = cpu_to_le32(60000);
+ memset(&params->channels[i].bssid_lsb, 0xff, 4);
+ memset(&params->channels[i].bssid_msb, 0xff, 2);
+ params->channels[i].early_termination = 0;
+ params->channels[i].tx_power_att = 0;
+ params->channels[i].channel = i + 1;
+ memset(params->channels[i].pad, 0, 3);
+ }
+
+ for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
+ memset(&params->channels[i], 0,
+ sizeof(struct basic_scan_channel_parameters));
+
+ if (len && ssid) {
+ params->params.ssid_len = len;
+ memcpy(params->params.ssid, ssid, len);
+ } else {
+ params->params.ssid_len = 0;
+ memset(params->params.ssid, 0, 32);
+ }
+
+ ret = wl12xx_build_probe_req(wl, ssid, len);
+ if (ret < 0) {
+ wl12xx_error("PROBE request template failed");
+ goto out;
+ }
+
+ ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan,
+ sizeof(u32));
+ if (ret < 0) {
+ wl12xx_error("Split SCAN failed");
+ goto out;
+ }
+
+ wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+ wl->scanning = true;
+
+ ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+ if (ret < 0)
+ wl12xx_error("SCAN failed");
+
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+ cmd_answer = (struct wl12xx_command *) params;
+ if (cmd_answer->status != CMD_STATUS_SUCCESS) {
+ wl12xx_error("TEST command answer error: %d",
+ cmd_answer->status);
+ wl->scanning = false;
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(params);
+ return ret;
+
+}
+
+static int wl12xx_op_hw_scan(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret;
+ u8 *ssid = NULL;
+ size_t ssid_len = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+ if (req->n_ssids) {
+ ssid = req->ssids[0].ssid;
+ ssid_len = req->ssids[0].ssid_len;
+ }
+
+ mutex_lock(&wl->mutex);
+ ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret;
+
+ ret = wl12xx_acx_rts_threshold(wl, (u16) value);
+
+ if (ret < 0)
+ wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret);
+
+ return ret;
+}
+
+static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changed)
+{
+ enum acx_ps_mode mode;
+ struct wl12xx *wl = hw->priv;
+ struct sk_buff *beacon;
+ int ret;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+ mutex_lock(&wl->mutex);
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (bss_conf->assoc) {
+ wl->aid = bss_conf->aid;
+
+ ret = wl12xx_build_ps_poll(wl, wl->aid);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_acx_aid(wl, wl->aid);
+ if (ret < 0)
+ goto out;
+
+ /* If we want to go in PSM but we're not there yet */
+ if (wl->psm_requested && !wl->psm) {
+ mode = STATION_POWER_SAVE_MODE;
+ ret = wl12xx_ps_set_mode(wl, mode);
+ if (ret < 0)
+ goto out;
+ }
+ }
+ }
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (bss_conf->use_short_slot)
+ ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT);
+ else
+ ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG);
+ if (ret < 0) {
+ wl12xx_warning("Set slot time failed %d", ret);
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ if (bss_conf->use_short_preamble)
+ wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+ else
+ wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+ }
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ if (bss_conf->use_cts_prot)
+ ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+ else
+ ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+ if (ret < 0) {
+ wl12xx_warning("Set ctsprotect failed %d", ret);
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+ ret = wl12xx_build_null_data(wl);
+ if (ret < 0)
+ goto out;
+
+ if (wl->bss_type != BSS_TYPE_IBSS) {
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
+ if (ret < 0)
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ beacon = ieee80211_beacon_get(hw, vif);
+ ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data,
+ beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out;
+ }
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+ beacon->len);
+
+ dev_kfree_skb(beacon);
+
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl12xx_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0x1,
+ .hw_value_short = 0x1, },
+ { .bitrate = 20,
+ .hw_value = 0x2,
+ .hw_value_short = 0x2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = 0x4,
+ .hw_value_short = 0x4,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = 0x20,
+ .hw_value_short = 0x20,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = 0x8,
+ .hw_value_short = 0x8, },
+ { .bitrate = 90,
+ .hw_value = 0x10,
+ .hw_value_short = 0x10, },
+ { .bitrate = 120,
+ .hw_value = 0x40,
+ .hw_value_short = 0x40, },
+ { .bitrate = 180,
+ .hw_value = 0x80,
+ .hw_value_short = 0x80, },
+ { .bitrate = 240,
+ .hw_value = 0x200,
+ .hw_value_short = 0x200, },
+ { .bitrate = 360,
+ .hw_value = 0x400,
+ .hw_value_short = 0x400, },
+ { .bitrate = 480,
+ .hw_value = 0x800,
+ .hw_value_short = 0x800, },
+ { .bitrate = 540,
+ .hw_value = 0x1000,
+ .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl12xx_channels[] = {
+ { .hw_value = 1, .center_freq = 2412},
+ { .hw_value = 2, .center_freq = 2417},
+ { .hw_value = 3, .center_freq = 2422},
+ { .hw_value = 4, .center_freq = 2427},
+ { .hw_value = 5, .center_freq = 2432},
+ { .hw_value = 6, .center_freq = 2437},
+ { .hw_value = 7, .center_freq = 2442},
+ { .hw_value = 8, .center_freq = 2447},
+ { .hw_value = 9, .center_freq = 2452},
+ { .hw_value = 10, .center_freq = 2457},
+ { .hw_value = 11, .center_freq = 2462},
+ { .hw_value = 12, .center_freq = 2467},
+ { .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl12xx_band_2ghz = {
+ .channels = wl12xx_channels,
+ .n_channels = ARRAY_SIZE(wl12xx_channels),
+ .bitrates = wl12xx_rates,
+ .n_bitrates = ARRAY_SIZE(wl12xx_rates),
+};
+
+static const struct ieee80211_ops wl12xx_ops = {
+ .start = wl12xx_op_start,
+ .stop = wl12xx_op_stop,
+ .add_interface = wl12xx_op_add_interface,
+ .remove_interface = wl12xx_op_remove_interface,
+ .config = wl12xx_op_config,
+ .configure_filter = wl12xx_op_configure_filter,
+ .tx = wl12xx_op_tx,
+ .set_key = wl12xx_op_set_key,
+ .hw_scan = wl12xx_op_hw_scan,
+ .bss_info_changed = wl12xx_op_bss_info_changed,
+ .set_rts_threshold = wl12xx_op_set_rts_threshold,
+};
+
+static int wl12xx_register_hw(struct wl12xx *wl)
+{
+ int ret;
+
+ if (wl->mac80211_registered)
+ return 0;
+
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+ ret = ieee80211_register_hw(wl->hw);
+ if (ret < 0) {
+ wl12xx_error("unable to register mac80211 hw: %d", ret);
+ return ret;
+ }
+
+ wl->mac80211_registered = true;
+
+ wl12xx_notice("loaded");
+
+ return 0;
+}
+
+static int wl12xx_init_ieee80211(struct wl12xx *wl)
+{
+ /* The tx descriptor buffer and the TKIP space */
+ wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+ + WL12XX_TKIP_IV_SPACE;
+
+ /* unit us */
+ /* FIXME: find a proper value */
+ wl->hw->channel_change_time = 10000;
+
+ wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->max_scan_ssids = 1;
+ wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz;
+
+ SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+
+ return 0;
+}
+
+#define WL12XX_DEFAULT_CHANNEL 1
+static int __devinit wl12xx_probe(struct spi_device *spi)
+{
+ struct wl12xx_platform_data *pdata;
+ struct ieee80211_hw *hw;
+ struct wl12xx *wl;
+ int ret, i;
+ static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ wl12xx_error("no platform data");
+ return -ENODEV;
+ }
+
+ hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops);
+ if (!hw) {
+ wl12xx_error("could not alloc ieee80211_hw");
+ return -ENOMEM;
+ }
+
+ wl = hw->priv;
+ memset(wl, 0, sizeof(*wl));
+
+ wl->hw = hw;
+ dev_set_drvdata(&spi->dev, wl);
+ wl->spi = spi;
+
+ wl->data_in_count = 0;
+
+ skb_queue_head_init(&wl->tx_queue);
+
+ INIT_WORK(&wl->tx_work, wl12xx_tx_work);
+ INIT_WORK(&wl->filter_work, wl12xx_filter_work);
+ wl->channel = WL12XX_DEFAULT_CHANNEL;
+ wl->scanning = false;
+ wl->default_key = 0;
+ wl->listen_int = 1;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->psm_requested = false;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+ /* We use the default power on sleep time until we know which chip
+ * we're using */
+ wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ wl->tx_frames[i] = NULL;
+
+ wl->next_tx_complete = 0;
+
+ /*
+ * In case our MAC address is not correctly set,
+ * we use a random but Nokia MAC.
+ */
+ memcpy(wl->mac_addr, nokia_oui, 3);
+ get_random_bytes(wl->mac_addr + 3, 3);
+
+ wl->state = WL12XX_STATE_OFF;
+ mutex_init(&wl->mutex);
+
+ wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+ wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+ /* This is the only SPI value that we need to set here, the rest
+ * comes from the board-peripherals file */
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ wl12xx_error("spi_setup failed");
+ goto out_free;
+ }
+
+ wl->set_power = pdata->set_power;
+ if (!wl->set_power) {
+ wl12xx_error("set power function missing in platform data");
+ return -ENODEV;
+ }
+
+ wl->irq = spi->irq;
+ if (wl->irq < 0) {
+ wl12xx_error("irq missing in platform data");
+ return -ENODEV;
+ }
+
+ ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl);
+ if (ret < 0) {
+ wl12xx_error("request_irq() failed: %d", ret);
+ goto out_free;
+ }
+
+ set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+ disable_irq(wl->irq);
+
+ ret = wl12xx_init_ieee80211(wl);
+ if (ret)
+ goto out_irq;
+
+ ret = wl12xx_register_hw(wl);
+ if (ret)
+ goto out_irq;
+
+ wl12xx_debugfs_init(wl);
+
+ wl12xx_notice("initialized");
+
+ return 0;
+
+ out_irq:
+ free_irq(wl->irq, wl);
+
+ out_free:
+ ieee80211_free_hw(hw);
+
+ return ret;
+}
+
+static int __devexit wl12xx_remove(struct spi_device *spi)
+{
+ struct wl12xx *wl = dev_get_drvdata(&spi->dev);
+
+ ieee80211_unregister_hw(wl->hw);
+
+ wl12xx_debugfs_exit(wl);
+
+ free_irq(wl->irq, wl);
+ kfree(wl->target_mem_map);
+ kfree(wl->data_path);
+ kfree(wl->fw);
+ wl->fw = NULL;
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ ieee80211_free_hw(wl->hw);
+
+ return 0;
+}
+
+
+static struct spi_driver wl12xx_spi_driver = {
+ .driver = {
+ .name = "wl12xx",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = wl12xx_probe,
+ .remove = __devexit_p(wl12xx_remove),
+};
+
+static int __init wl12xx_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&wl12xx_spi_driver);
+ if (ret < 0) {
+ wl12xx_error("failed to register spi driver: %d", ret);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit wl12xx_exit(void)
+{
+ spi_unregister_driver(&wl12xx_spi_driver);
+
+ wl12xx_notice("unloaded");
+}
+
+module_init(wl12xx_init);
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
+ "Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
new file mode 100644
index 000000000000..83a10117330b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -0,0 +1,151 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "reg.h"
+#include "ps.h"
+#include "spi.h"
+
+#define WL12XX_WAKEUP_TIMEOUT 2000
+
+/* Routines to toggle sleep mode while in ELP */
+void wl12xx_ps_elp_sleep(struct wl12xx *wl)
+{
+ if (wl->elp || !wl->psm)
+ return;
+
+ wl12xx_debug(DEBUG_PSM, "chip to elp");
+
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+
+ wl->elp = true;
+}
+
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl)
+{
+ unsigned long timeout;
+ u32 elp_reg;
+
+ if (!wl->elp)
+ return 0;
+
+ wl12xx_debug(DEBUG_PSM, "waking up chip from elp");
+
+ timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT);
+
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ /*
+ * FIXME: we should wait for irq from chip but, as a temporary
+ * solution to simplify locking, let's poll instead
+ */
+ while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+ if (time_after(jiffies, timeout)) {
+ wl12xx_error("elp wakeup timeout");
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+ }
+
+ wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms",
+ jiffies_to_msecs(jiffies) -
+ (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT));
+
+ wl->elp = false;
+
+ return 0;
+}
+
+static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable)
+{
+ int ret;
+
+ if (enable) {
+ wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp");
+
+ /*
+ * FIXME: we should PSM_ELP, but because of firmware wakeup
+ * problems let's use only PSM_PS
+ */
+ ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_ps_elp_sleep(wl);
+ } else {
+ wl12xx_debug(DEBUG_PSM, "sleep auth cam");
+
+ /*
+ * When the target is in ELP, we can only
+ * access the ELP control register. Thus,
+ * we have to wake the target up before
+ * changing the power authorization.
+ */
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode)
+{
+ int ret;
+
+ switch (mode) {
+ case STATION_POWER_SAVE_MODE:
+ wl12xx_debug(DEBUG_PSM, "entering psm");
+ ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_ps_set_elp(wl, true);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 1;
+ break;
+ case STATION_ACTIVE_MODE:
+ default:
+ wl12xx_debug(DEBUG_PSM, "leaving psm");
+ ret = wl12xx_ps_set_elp(wl, false);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 0;
+ break;
+ }
+
+ return ret;
+}
+
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
new file mode 100644
index 000000000000..5d7c52553830
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -0,0 +1,36 @@
+#ifndef __WL12XX_PS_H__
+#define __WL12XX_PS_H__
+
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "acx.h"
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode);
+void wl12xx_ps_elp_sleep(struct wl12xx *wl);
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl);
+
+
+#endif /* __WL12XX_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
new file mode 100644
index 000000000000..e421643215cd
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -0,0 +1,745 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+#include "wl12xx.h"
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE 0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP 0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
+#define ELPCTRL_SLEEP 0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY 0x2
+
+/*
+ * Interrupt registers.
+ * 64 bit interrupt sources registers ws ced.
+ * sme interupts were removed and new ones were added.
+ * Order was changed.
+ */
+#define FIQ_MASK (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_L (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_H (REGISTERS_BASE + 0x0404)
+#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C)
+#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414)
+#define IRQ_MASK (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_L (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_H (REGISTERS_BASE + 0x041C)
+#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424)
+#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C)
+#define ECPU_MASK (REGISTERS_BASE + 0x0448)
+#define FIQ_STS_L (REGISTERS_BASE + 0x044C)
+#define FIQ_STS_H (REGISTERS_BASE + 0x0450)
+#define IRQ_STS_L (REGISTERS_BASE + 0x0454)
+#define IRQ_STS_H (REGISTERS_BASE + 0x0458)
+#define INT_STS_ND (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468)
+#define INT_STS_CLR (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8)
+#define INT_ACK (REGISTERS_BASE + 0x046C)
+#define INT_ACK_L (REGISTERS_BASE + 0x046C)
+#define INT_ACK_H (REGISTERS_BASE + 0x0470)
+#define INT_TRIG (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_L (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_H (REGISTERS_BASE + 0x0478)
+#define HOST_STS_L (REGISTERS_BASE + 0x045C)
+#define HOST_STS_H (REGISTERS_BASE + 0x0460)
+#define HOST_MASK (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_L (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_H (REGISTERS_BASE + 0x0434)
+#define HOST_MASK_SET (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C)
+#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444)
+
+/* Host Interrupts*/
+#define HINT_MASK (REGISTERS_BASE + 0x0494)
+#define HINT_MASK_SET (REGISTERS_BASE + 0x0498)
+#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C)
+#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0)
+/*1150 spec calls this HINT_STS_RAW*/
+#define HINT_STS_ND (REGISTERS_BASE + 0x04B0)
+#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4)
+#define HINT_ACK (REGISTERS_BASE + 0x04A8)
+#define HINT_TRIG (REGISTERS_BASE + 0x04AC)
+
+/* Device Configuration registers*/
+#define SOR_CFG (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL (REGISTERS_BASE + 0x0804)
+#define HI_CFG (REGISTERS_BASE + 0x0808)
+#define EE_START (REGISTERS_BASE + 0x080C)
+
+#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+
+#define ENABLE (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
+#define ELP_CMD (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1 (REGISTERS_BASE + 0x0994)
+#define SPARE_A2 (REGISTERS_BASE + 0x0998)
+#define SPARE_A3 (REGISTERS_BASE + 0x099C)
+#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1 (REGISTERS_BASE + 0x5420)
+#define SPARE_B2 (REGISTERS_BASE + 0x5424)
+#define SPARE_B3 (REGISTERS_BASE + 0x5428)
+#define SPARE_B4 (REGISTERS_BASE + 0x542C)
+#define SPARE_B5 (REGISTERS_BASE + 0x5430)
+#define SPARE_B6 (REGISTERS_BASE + 0x5434)
+#define SPARE_B7 (REGISTERS_BASE + 0x5438)
+#define SPARE_B8 (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+ ACX_REG_INTERRUPT_TRIG,
+ ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+ Host Interrupt Mask Register - 32bit (RW)
+ ------------------------------------------
+ Setting a bit in this register masks the
+ corresponding interrupt to the host.
+ 0 - RX0 - Rx first dubble buffer Data Interrupt
+ 1 - TXD - Tx Data Interrupt
+ 2 - TXXFR - Tx Transfer Interrupt
+ 3 - RX1 - Rx second dubble buffer Data Interrupt
+ 4 - RXXFR - Rx Transfer Interrupt
+ 5 - EVENT_A - Event Mailbox interrupt
+ 6 - EVENT_B - Event Mailbox interrupt
+ 7 - WNONHST - Wake On Host Interrupt
+ 8 - TRACE_A - Debug Trace interrupt
+ 9 - TRACE_B - Debug Trace interrupt
+ 10 - CDCMP - Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP - Initialization Complete Interrupt
+ 16 - SG SE - Soft Gemini - Sense enable interrupt
+ 17 - SG SD - Soft Gemini - Sense disable interrupt
+ 18 - -
+ 19 - -
+ 20 - -
+ 21- -
+ Default: 0x0001
+*==============================================*/
+ ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+ Host Interrupt Mask Set 16bit, (Write only)
+ ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+ ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+ Host Interrupt Mask Clear 16bit,(Write only)
+ ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+ ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+ Host Interrupt Status Nondestructive Read
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+ ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+ Host Interrupt Status Clear on Read Register
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+ ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+ Host Interrupt Acknowledge Register
+ 16bit,(Write only)
+ ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+ ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+ Host Software Reset - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 SOFT_RESET Soft Reset - When this bit is set,
+ it holds the Wlan hardware in a soft reset state.
+ This reset disables all MAC and baseband processor
+ clocks except the CardBus/PCI interface clock.
+ It also initializes all MAC state machines except
+ the host interface. It does not reload the
+ contents of the EEPROM. When this bit is cleared
+ (not self-clearing), the Wlan hardware
+ exits the software reset state.
+===============================================*/
+ ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 ACX_EE_START - EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+ ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+ ACX_REG_ECPU_CONTROL,
+
+ ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT BIT(1)
+#define ACX_REG_EEPROM_START_BIT BIT(1)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+ Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
+
+/*===============================================
+ Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX (ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG (RX_CFG)
+#define REG_RX_FILTER (RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS 0x2000
+#define RX_CFG_TSF 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+ | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+ | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+ | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+ | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+ | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+ | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+ Phy regs
+ ===============================================*/
+#define ACX_PHY_ADDR_REG SBB_ADDR
+#define ACX_PHY_DATA_REG SBB_DATA
+#define ACX_PHY_CTRL_REG SBB_CTL
+#define ACX_PHY_REG_WR_MASK 0x00000001ul
+#define ACX_PHY_REG_RD_MASK 0x00000002ul
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE - EEPROM Write Request - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG EE_CTL
+#define EE_WRITE 0x00000001ul
+#define EE_READ 0x00000002ul
+
+/*===============================================
+ EEPROM Address - 32bit RW
+ ------------------------------------------
+ This register specifies the address
+ within the EEPROM from/to which to read/write data.
+ ===============================================*/
+#define ACX_EE_ADDR_REG EE_ADDR
+
+/*===============================================
+ EEPROM Data - 32bit RW
+ ------------------------------------------
+ This register either holds the read 8 bits of
+ data from the EEPROM or the write data
+ to be written to the EEPROM.
+ ===============================================*/
+#define ACX_EE_DATA_REG EE_DATA
+
+/*===============================================
+ EEPROM Base Address - 32bit RW
+ ------------------------------------------
+ This register holds the upper nine bits
+ [23:15] of the 24-bit Wlan hardware memory
+ address for burst reads from EEPROM accesses.
+ The EEPROM provides the lower 15 bits of this address.
+ The MSB of the address from the EEPROM is ignored.
+ ===============================================*/
+#define ACX_EE_CFG EE_CFG
+
+/*===============================================
+ GPIO Output Values -32bit, RW
+ ------------------------------------------
+ [31:16] Reserved
+ [15: 0] Specify the output values (at the output driver inputs) for
+ GPIO[15:0], respectively.
+ ===============================================*/
+#define ACX_GPIO_OUT_REG GPIO_OUT
+#define ACX_MAX_GPIO_LINES 15
+
+/*===============================================
+ Contention window -32bit, RW
+ ------------------------------------------
+ [31:26] Reserved
+ [25:16] Max (0x3ff)
+ [15:07] Reserved
+ [06:00] Current contention window value - default is 0x1F
+ ===============================================*/
+#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK 0x0000007f
+#define ACX_CONT_WIND_MAX 0x03ff0000
+
+/*
+ * Indirect slave register/memory registers
+ * ----------------------------------------
+ */
+#define HW_SLAVE_REG_ADDR_REG 0x00000004
+#define HW_SLAVE_REG_DATA_REG 0x00000008
+#define HW_SLAVE_REG_CTRL_REG 0x0000000c
+
+#define SLAVE_AUTO_INC 0x00010000
+#define SLAVE_NO_AUTO_INC 0x00000000
+#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000
+
+#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR
+#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA
+#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL
+#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL
+
+#define HW_FUNC_EVENT_INT_EN 0x8000
+#define HW_FUNC_EVENT_MASK_REG 0x00000034
+
+#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP)
+
+/*===============================================
+ HI_CFG Interface Configuration Register Values
+ ------------------------------------------
+ ===============================================*/
+#define HI_CFG_UART_ENABLE 0x00000004
+#define HI_CFG_RST232_ENABLE 0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
+#define HI_CFG_HOST_INT_ENABLE 0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ * for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2 0
+#define REF_FREQ_26_0 1
+#define REF_FREQ_38_4 2
+#define REF_FREQ_40_0 3
+#define REF_FREQ_33_6 4
+#define REF_FREQ_NUM 5
+
+#define LUT_PARAM_INTEGER_DIVIDER 0
+#define LUT_PARAM_FRACTIONAL_DIVIDER 1
+#define LUT_PARAM_ATTN_BB 2
+#define LUT_PARAM_ALPHA_BB 3
+#define LUT_PARAM_STOP_TIME_BB 4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
+#define LUT_PARAM_NUM 6
+
+#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
+#define USE_EEPROM 0
+#define SOFT_RESET_MAX_TIME 1000000
+#define SOFT_RESET_STALL_TIME 1000
+#define NVS_DATA_BUNDARY_ALIGNMENT 4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE 512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT 0x00000101
+
+
+/******************************************************************************
+
+ CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+ RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
+ RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
+ RADIO_BAND_JAPAN_4_9_GHZ = 2,
+ DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+ INVALID_BAND = 0xFE,
+ MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+ NO_RATE = 0,
+ RATE_1MBPS = 0x0A,
+ RATE_2MBPS = 0x14,
+ RATE_5_5MBPS = 0x37,
+ RATE_6MBPS = 0x0B,
+ RATE_9MBPS = 0x0F,
+ RATE_11MBPS = 0x6E,
+ RATE_12MBPS = 0x0A,
+ RATE_18MBPS = 0x0E,
+ RATE_22MBPS = 0xDC,
+ RATE_24MBPS = 0x09,
+ RATE_36MBPS = 0x0D,
+ RATE_48MBPS = 0x08,
+ RATE_54MBPS = 0x0C
+};
+
+enum {
+ RATE_INDEX_1MBPS = 0,
+ RATE_INDEX_2MBPS = 1,
+ RATE_INDEX_5_5MBPS = 2,
+ RATE_INDEX_6MBPS = 3,
+ RATE_INDEX_9MBPS = 4,
+ RATE_INDEX_11MBPS = 5,
+ RATE_INDEX_12MBPS = 6,
+ RATE_INDEX_18MBPS = 7,
+ RATE_INDEX_22MBPS = 8,
+ RATE_INDEX_24MBPS = 9,
+ RATE_INDEX_36MBPS = 10,
+ RATE_INDEX_48MBPS = 11,
+ RATE_INDEX_54MBPS = 12,
+ RATE_INDEX_MAX = RATE_INDEX_54MBPS,
+ MAX_RATE_INDEX,
+ INVALID_RATE_INDEX = MAX_RATE_INDEX,
+ RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+ RATE_MASK_1MBPS = 0x1,
+ RATE_MASK_2MBPS = 0x2,
+ RATE_MASK_5_5MBPS = 0x4,
+ RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+enum {
+ CCK_LONG = 0,
+ CCK_SHORT = SHORT_PREAMBLE_BIT,
+ PBCC_LONG = PBCC_RATE_BIT,
+ PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+ OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15 - Indicates Preamble type (1=SHORT, 0=LONG).
+ Notes:
+ Must be LONG (0) for 1Mbps rate.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b14 - Indicates PBCC encoding (1=PBCC, 0=not).
+ Notes:
+ Does not apply (set to 0) for rates 1 and 2 Mbps.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b13 - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+#define TNETW1251_CHIP_ID_PG1_0 0x07010101
+#define TNETW1251_CHIP_ID_PG1_1 0x07020101
+#define TNETW1251_CHIP_ID_PG1_2 0x07030101
+
+/*************************************************************************
+
+ Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
new file mode 100644
index 000000000000..981ea259eb89
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "rx.h"
+
+static void wl12xx_rx_header(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc)
+{
+ u32 rx_packet_ring_addr;
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc,
+ sizeof(struct wl12xx_rx_descriptor));
+}
+
+static void wl12xx_rx_status(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc,
+ struct ieee80211_rx_status *status,
+ u8 beacon)
+{
+ memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+ status->band = IEEE80211_BAND_2GHZ;
+ status->mactime = desc->timestamp;
+
+ /*
+ * The rx status timestamp is a 32 bits value while the TSF is a
+ * 64 bits one.
+ * For IBSS merging, TSF is mandatory, so we have to get it
+ * somehow, so we ask for ACX_TSF_INFO.
+ * That could be moved to the get_tsf() hook, but unfortunately,
+ * this one must be atomic, while our SPI routines can sleep.
+ */
+ if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+ u64 mactime;
+ int ret;
+ struct wl12xx_command cmd;
+ struct acx_tsf_info *tsf_info;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO,
+ sizeof(struct acx_tsf_info),
+ &cmd);
+ if (ret < 0) {
+ wl12xx_warning("ACX_FW_REV interrogate failed");
+ return;
+ }
+
+ tsf_info = (struct acx_tsf_info *)&(cmd.parameters);
+
+ mactime = tsf_info->current_tsf_lsb |
+ (tsf_info->current_tsf_msb << 31);
+
+ status->mactime = mactime;
+ }
+
+ status->signal = desc->rssi;
+ status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 /
+ (WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI);
+ status->qual = min(status->qual, 100);
+ status->qual = max(status->qual, 0);
+
+ /*
+ * FIXME: guessing that snr needs to be divided by two, otherwise
+ * the values don't make any sense
+ */
+ status->noise = desc->rssi - desc->snr / 2;
+
+ status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+ status->flag |= RX_FLAG_TSFT;
+
+ if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+ status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+ if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+ status->flag |= RX_FLAG_DECRYPTED;
+
+ if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+ status->flag |= RX_FLAG_MMIC_ERROR;
+ }
+
+ if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+ status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+ /* FIXME: set status->rate_idx */
+}
+
+static void wl12xx_rx_body(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc)
+{
+ struct sk_buff *skb;
+ struct ieee80211_rx_status status;
+ u8 *rx_buffer, beacon = 0;
+ u16 length, *fc;
+ u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+ length = WL12XX_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH);
+ curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+ last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+ if (last_id_inc != curr_id) {
+ wl12xx_warning("curr ID:%d, last ID inc:%d",
+ curr_id, last_id_inc);
+ wl->rx_last_id = curr_id;
+ } else {
+ wl->rx_last_id = last_id_inc;
+ }
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+ sizeof(struct wl12xx_rx_descriptor) + 20;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ skb = dev_alloc_skb(length);
+ if (!skb) {
+ wl12xx_error("Couldn't allocate RX frame");
+ return;
+ }
+
+ rx_buffer = skb_put(skb, length);
+ wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+ /* The actual lenght doesn't include the target's alignment */
+ skb->len = desc->length - PLCP_HEADER_LENGTH;
+
+ fc = (u16 *)skb->data;
+
+ if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+ beacon = 1;
+
+ wl12xx_rx_status(wl, desc, &status, beacon);
+
+ wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+ beacon ? "beacon" : "");
+
+ ieee80211_rx(wl->hw, skb, &status);
+}
+
+static void wl12xx_rx_ack(struct wl12xx *wl)
+{
+ u32 data, addr;
+
+ if (wl->rx_current_buffer) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_RX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_RX_PROC0;
+ }
+
+ wl12xx_reg_write32(wl, addr, data);
+
+ /* Toggle buffer ring */
+ wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl12xx_rx(struct wl12xx *wl)
+{
+ struct wl12xx_rx_descriptor rx_desc;
+
+ if (wl->state != WL12XX_STATE_ON)
+ return;
+
+ /* We first read the frame's header */
+ wl12xx_rx_header(wl, &rx_desc);
+
+ /* Now we can read the body */
+ wl12xx_rx_body(wl, &rx_desc);
+
+ /* Finally, we need to ACK the RX */
+ wl12xx_rx_ack(wl);
+
+ return;
+}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
new file mode 100644
index 000000000000..8a23fdea5016
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_RX_H__
+#define __WL12XX_RX_H__
+
+#include <linux/bitops.h>
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ * There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL12XX_RX_MAX_RSSI -30
+#define WL12XX_RX_MIN_RSSI -95
+
+#define WL12XX_RX_ALIGN_TO 4
+#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \
+ ~(WL12XX_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT BIT(0)
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS 0x0001
+#define RX_DESC_MATCH_RXADDR1 0x0002
+#define RX_DESC_MCAST 0x0004
+#define RX_DESC_STAINTIM 0x0008
+#define RX_DESC_VIRTUAL_BM 0x0010
+#define RX_DESC_BCAST 0x0020
+#define RX_DESC_MATCH_SSID 0x0040
+#define RX_DESC_MATCH_BSSID 0x0080
+#define RX_DESC_ENCRYPTION_MASK 0x0300
+#define RX_DESC_MEASURMENT 0x0400
+#define RX_DESC_SEQNUM_MASK 0x1800
+#define RX_DESC_MIC_FAIL 0x2000
+#define RX_DESC_DECRYPT_FAIL 0x4000
+
+struct wl12xx_rx_descriptor {
+ u32 timestamp; /* In microseconds */
+ u16 length; /* Paylod length, including headers */
+ u16 flags;
+
+ /*
+ * 0 - 802.11
+ * 1 - 802.3
+ * 2 - IP
+ * 3 - Raw Codec
+ */
+ u8 type;
+
+ /*
+ * Recevied Rate:
+ * 0x0A - 1MBPS
+ * 0x14 - 2MBPS
+ * 0x37 - 5_5MBPS
+ * 0x0B - 6MBPS
+ * 0x0F - 9MBPS
+ * 0x6E - 11MBPS
+ * 0x0A - 12MBPS
+ * 0x0E - 18MBPS
+ * 0xDC - 22MBPS
+ * 0x09 - 24MBPS
+ * 0x0D - 36MBPS
+ * 0x08 - 48MBPS
+ * 0x0C - 54MBPS
+ */
+ u8 rate;
+
+ u8 mod_pre; /* Modulation and preamble */
+ u8 channel;
+
+ /*
+ * 0 - 2.4 Ghz
+ * 1 - 5 Ghz
+ */
+ u8 band;
+
+ s8 rssi; /* in dB */
+ u8 rcpi; /* in dB */
+ u8 snr; /* in dB */
+} __attribute__ ((packed));
+
+void wl12xx_rx(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
new file mode 100644
index 000000000000..abdf171a47e7
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -0,0 +1,358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
+{
+ /* If the address is lower than REGISTERS_BASE, it means that this is
+ * a chip-specific register address, so look it up in the registers
+ * table */
+ if (addr < REGISTERS_BASE) {
+ /* Make sure we don't go over the table */
+ if (addr >= ACX_REG_TABLE_LEN) {
+ wl12xx_error("address out of range (%d)", addr);
+ return -EINVAL;
+ }
+ addr = wl->chip.acx_reg_table[addr];
+ }
+
+ return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
+{
+ return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+
+void wl12xx_spi_reset(struct wl12xx *wl)
+{
+ u8 *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl12xx_error("could not allocate cmd for spi reset");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+void wl12xx_spi_init(struct wl12xx *wl)
+{
+ u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl12xx_error("could not allocate cmd for spi init");
+ return;
+ }
+
+ memset(crc, 0, sizeof(crc));
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /*
+ * Set WSPI_INIT_COMMAND
+ * the data is being send from the MSB to LSB
+ */
+ cmd[2] = 0xff;
+ cmd[3] = 0xff;
+ cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+ cmd[0] = 0;
+ cmd[7] = 0;
+ cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+ cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+ if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+ cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
+ else
+ cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+ cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+ | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+ crc[0] = cmd[1];
+ crc[1] = cmd[0];
+ crc[2] = cmd[7];
+ crc[3] = cmd[6];
+ crc[4] = cmd[5];
+
+ cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+ cmd[4] |= WSPI_INIT_CMD_END;
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * There are two VIRTUAL (SPI) partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory. This function also makes other checks to
+ * ensure that the partitions are not overlapping. In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ * PHYSICAL address
+ * space
+ *
+ * | |
+ * ...+----+--> mem_start
+ * VIRTUAL address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * part_size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * part_size | | ... | |
+ * + <--+----+... ...+----+--> reg_start
+ * reg_size ... | |
+ * ... | | [PART_1]
+ * ... | |
+ * ...+----+--> reg_start + reg_size
+ * | |
+ *
+ */
+void wl12xx_set_partition(struct wl12xx *wl,
+ u32 mem_start, u32 mem_size,
+ u32 reg_start, u32 reg_size)
+{
+ u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
+ struct wl12xx_partition *partition;
+ struct spi_transfer t;
+ struct spi_message m;
+ u32 *cmd;
+ size_t len;
+ int addr;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+ memset(tx_buf, 0, sizeof(tx_buf));
+
+ cmd = (u32 *) tx_buf;
+ partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
+ addr = HW_ACCESS_PART0_SIZE_ADDR;
+ len = 2 * sizeof(struct wl12xx_partition);
+
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+
+ /* Make sure that the two partitions together don't exceed the
+ * address range */
+ if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+ wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+ " address range. Truncating partition[0].");
+ mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ if ((mem_start < reg_start) &&
+ ((mem_start + mem_size) > reg_start)) {
+ /* Guarantee that the memory partition doesn't overlap the
+ * registers partition */
+ wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
+ "overlapping partition[1]. Adjusted.");
+ mem_size = reg_start - mem_start;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ } else if ((reg_start < mem_start) &&
+ ((reg_start + reg_size) > mem_start)) {
+ /* Guarantee that the register partition doesn't overlap the
+ * memory partition */
+ wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
+ " overlapping partition[0]. Adjusted.");
+ reg_size = mem_start - reg_start;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ partition[0].start = mem_start;
+ partition[0].size = mem_size;
+ partition[1].start = reg_start;
+ partition[1].size = reg_size;
+
+ wl->physical_mem_addr = mem_start;
+ wl->physical_reg_addr = reg_start;
+
+ wl->virtual_mem_addr = 0;
+ wl->virtual_reg_addr = mem_size;
+
+ t.tx_buf = tx_buf;
+ t.len = sizeof(tx_buf);
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+}
+
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ char busy_buf[TNETWIF_READ_OFFSET_BYTES];
+ u32 cmd;
+
+ cmd = 0;
+ cmd |= WSPI_CMD_READ;
+ cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = 4;
+ spi_message_add_tail(&t[0], &m);
+
+ /* Busy and non busy words read */
+ t[1].rx_buf = busy_buf;
+ t[1].len = TNETWIF_READ_OFFSET_BYTES;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = buf;
+ t[2].len = len;
+ spi_message_add_tail(&t[2], &m);
+
+ spi_sync(wl->spi, &m);
+
+ /* FIXME: check busy words */
+
+ wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
+ wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u32 cmd;
+
+ cmd = 0;
+ cmd |= WSPI_CMD_WRITE;
+ cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
+ wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl12xx_translate_mem_addr(wl, addr);
+
+ wl12xx_spi_read(wl, physical, buf, len);
+}
+
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl12xx_translate_mem_addr(wl, addr);
+
+ wl12xx_spi_write(wl, physical, buf, len);
+}
+
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
+{
+ return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
+}
+
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
+{
+ return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
+}
+
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
+}
diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h
new file mode 100644
index 000000000000..fd3227e904a8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.h
@@ -0,0 +1,109 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_SPI_H__
+#define __WL12XX_SPI_H__
+
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR 0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR 0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE 4
+
+#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
+
+#define WSPI_CMD_READ 0x40000000
+#define WSPI_CMD_WRITE 0x00000000
+#define WSPI_CMD_FIXED 0x20000000
+#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
+#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN 5
+
+#define WSPI_INIT_CMD_START 0x00
+#define WSPI_INIT_CMD_TX 0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT 0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD 0x40
+#define WSPI_INIT_CMD_IP 0x20
+#define WSPI_INIT_CMD_CS 0x10
+#define WSPI_INIT_CMD_WS 0x08
+#define WSPI_INIT_CMD_WSPI 0x01
+#define WSPI_INIT_CMD_END 0x01
+
+#define WSPI_INIT_CMD_LEN 8
+
+#define TNETWIF_READ_OFFSET_BYTES 8
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+ ((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
+
+
+/* Raw target IO, address is not translated */
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+
+/* Memory target IO, address is tranlated to partition 0 */
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr);
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* Registers IO */
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr);
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* INIT and RESET words */
+void wl12xx_spi_reset(struct wl12xx *wl);
+void wl12xx_spi_init(struct wl12xx *wl);
+void wl12xx_set_partition(struct wl12xx *wl,
+ u32 part_start, u32 part_size,
+ u32 reg_start, u32 reg_size);
+
+static inline u32 wl12xx_read32(struct wl12xx *wl, int addr)
+{
+ u32 response;
+
+ wl12xx_spi_read(wl, addr, &response, sizeof(u32));
+
+ return response;
+}
+
+static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_spi_write(wl, addr, &val, sizeof(u32));
+}
+
+#endif /* __WL12XX_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
new file mode 100644
index 000000000000..62145e205a8c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -0,0 +1,557 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "tx.h"
+#include "ps.h"
+
+static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
+{
+ int used, data_in_count;
+
+ data_in_count = wl->data_in_count;
+
+ if (data_in_count < data_out_count)
+ /* data_in_count has wrapped */
+ data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+ used = data_in_count - data_out_count;
+
+ WARN_ON(used < 0);
+ WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+ if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+ return true;
+ else
+ return false;
+}
+
+static int wl12xx_tx_path_status(struct wl12xx *wl)
+{
+ u32 status, addr, data_out_count;
+ bool busy;
+
+ addr = wl->data_path->tx_control_addr;
+ status = wl12xx_mem_read32(wl, addr);
+ data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+ busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
+
+ if (busy)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] == NULL) {
+ wl->tx_frames[i] = skb;
+ return i;
+ }
+
+ return -EBUSY;
+}
+
+static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
+ struct ieee80211_tx_info *control, u16 fc)
+{
+ *(u16 *)&tx_hdr->control = 0;
+
+ tx_hdr->control.rate_policy = 0;
+
+ /* 802.11 packets */
+ tx_hdr->control.packet_type = 0;
+
+ if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+ tx_hdr->control.ack_policy = 1;
+
+ tx_hdr->control.tx_complete = 1;
+
+ if ((fc & IEEE80211_FTYPE_DATA) &&
+ ((fc & IEEE80211_STYPE_QOS_DATA) ||
+ (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+ tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH 16
+#define MAX_MPDU_SECURITY_LENGTH 16
+#define WLAN_QOS_HDR_LEN 26
+#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
+ WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE 252
+static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+ u16 payload_len, frag_threshold, mem_blocks;
+ u16 num_mpdus, mem_blocks_per_frag;
+
+ frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+ payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+ if (payload_len > frag_threshold) {
+ mem_blocks_per_frag =
+ ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+ HW_BLOCK_SIZE) + 1;
+ num_mpdus = payload_len / frag_threshold;
+ mem_blocks = num_mpdus * mem_blocks_per_frag;
+ payload_len -= num_mpdus * frag_threshold;
+ num_mpdus++;
+
+ } else {
+ mem_blocks_per_frag = 0;
+ mem_blocks = 0;
+ num_mpdus = 1;
+ }
+
+ mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+ if (num_mpdus > 1)
+ mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+ tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ struct ieee80211_rate *rate;
+ int id;
+ u16 fc;
+
+ if (!skb)
+ return -EINVAL;
+
+ id = wl12xx_tx_id(wl, skb);
+ if (id < 0)
+ return id;
+
+ fc = *(u16 *)skb->data;
+ tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+ sizeof(*tx_hdr));
+
+ tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+ rate = ieee80211_get_tx_rate(wl->hw, control);
+ tx_hdr->rate = cpu_to_le16(rate->hw_value);
+ tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+ tx_hdr->id = id;
+
+ /* FIXME: how to get the correct queue id? */
+ tx_hdr->xmit_queue = 0;
+
+ wl12xx_tx_control(tx_hdr, control, fc);
+ wl12xx_tx_frag_block_num(tx_hdr);
+
+ return 0;
+}
+
+/* We copy the packet to the target */
+static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ int len;
+ u32 addr;
+
+ if (!skb)
+ return -EINVAL;
+
+ tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+ if (control->control.hw_key &&
+ control->control.hw_key->alg == ALG_TKIP) {
+ int hdrlen;
+ u16 fc;
+ u8 *pos;
+
+ fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+ tx_hdr->length += WL12XX_TKIP_IV_SPACE;
+
+ hdrlen = ieee80211_hdrlen(fc);
+
+ pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
+ memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
+ sizeof(*tx_hdr) + hdrlen);
+ }
+
+ /* Revisit. This is a workaround for getting non-aligned packets.
+ This happens at least with EAPOL packets from the user space.
+ Our DMA requires packets to be aligned on a 4-byte boundary.
+ */
+ if (unlikely((long)skb->data & 0x03)) {
+ int offset = (4 - (long)skb->data) & 0x03;
+ wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+ /* align the buffer on a 4-byte boundary */
+ skb_reserve(skb, offset);
+ memmove(skb->data, src, skb->len);
+ } else {
+ wl12xx_info("No handler, fixme!");
+ return -EINVAL;
+ }
+ }
+
+ /* Our skb->data at this point includes the HW header */
+ len = WL12XX_TX_ALIGN(skb->len);
+
+ if (wl->data_in_count & 0x1)
+ addr = wl->data_path->tx_packet_ring_addr +
+ wl->data_path->tx_packet_ring_chunk_size;
+ else
+ addr = wl->data_path->tx_packet_ring_addr;
+
+ wl12xx_spi_mem_write(wl, addr, skb->data, len);
+
+ wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+ tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+ return 0;
+}
+
+static void wl12xx_tx_trigger(struct wl12xx *wl)
+{
+ u32 data, addr;
+
+ if (wl->data_in_count & 0x1) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_TX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_TX_PROC0;
+ }
+
+ wl12xx_reg_write32(wl, addr, data);
+
+ /* Bumping data in */
+ wl->data_in_count = (wl->data_in_count + 1) &
+ TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info;
+ int ret = 0;
+ u8 idx;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.hw_key) {
+ idx = info->control.hw_key->hw_key_idx;
+ if (unlikely(wl->default_key != idx)) {
+ ret = wl12xx_acx_default_key(wl, idx);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ ret = wl12xx_tx_path_status(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_tx_fill_hdr(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_tx_send_packet(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_tx_trigger(wl);
+
+ return ret;
+}
+
+void wl12xx_tx_work(struct work_struct *work)
+{
+ struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
+ struct sk_buff *skb;
+ bool woken_up = false;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL12XX_STATE_OFF))
+ goto out;
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ if (!woken_up) {
+ wl12xx_ps_elp_wakeup(wl);
+ woken_up = true;
+ }
+
+ ret = wl12xx_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is full, stop queues */
+ wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
+ "stop queues");
+ ieee80211_stop_queues(wl->hw);
+ wl->tx_queue_stopped = true;
+ skb_queue_head(&wl->tx_queue, skb);
+ goto out;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ goto out;
+ }
+ }
+
+out:
+ if (woken_up)
+ wl12xx_ps_elp_sleep(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static const char *wl12xx_tx_parse_status(u8 status)
+{
+ /* 8 bit status field, one character per bit plus null */
+ static char buf[9];
+ int i = 0;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (status & TX_DMA_ERROR)
+ buf[i++] = 'm';
+ if (status & TX_DISABLED)
+ buf[i++] = 'd';
+ if (status & TX_RETRY_EXCEEDED)
+ buf[i++] = 'r';
+ if (status & TX_TIMEOUT)
+ buf[i++] = 't';
+ if (status & TX_KEY_NOT_FOUND)
+ buf[i++] = 'k';
+ if (status & TX_ENCRYPT_FAIL)
+ buf[i++] = 'e';
+ if (status & TX_UNAVAILABLE_PRIORITY)
+ buf[i++] = 'p';
+
+ /* bit 0 is unused apparently */
+
+ return buf;
+}
+
+static void wl12xx_tx_packet_cb(struct wl12xx *wl,
+ struct tx_result *result)
+{
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+ int hdrlen, ret;
+ u8 *frame;
+
+ skb = wl->tx_frames[result->id];
+ if (skb == NULL) {
+ wl12xx_error("SKB for packet %d is NULL", result->id);
+ return;
+ }
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (result->status == TX_SUCCESS))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = result->ack_failures + 1;
+ wl->stats.retry_count += result->ack_failures;
+
+ /*
+ * We have to remove our private TX header before pushing
+ * the skb back to mac80211.
+ */
+ frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP) {
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
+ skb_pull(skb, WL12XX_TKIP_IV_SPACE);
+ }
+
+ wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+ " status 0x%x (%s)",
+ result->id, skb, result->ack_failures, result->rate,
+ result->status, wl12xx_tx_parse_status(result->status));
+
+
+ ieee80211_tx_status(wl->hw, skb);
+
+ wl->tx_frames[result->id] = NULL;
+
+ if (wl->tx_queue_stopped) {
+ wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
+
+ skb = skb_dequeue(&wl->tx_queue);
+
+ /* The skb can be NULL because tx_work might have been
+ scheduled before the queue was stopped making the
+ queue empty */
+
+ if (skb) {
+ ret = wl12xx_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is still full */
+ wl12xx_debug(DEBUG_TX, "cb: fw buffer "
+ "still full");
+ skb_queue_head(&wl->tx_queue, skb);
+ return;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ wl12xx_debug(DEBUG_TX, "cb: waking queues");
+ ieee80211_wake_queues(wl->hw);
+ wl->tx_queue_stopped = false;
+ }
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl12xx_tx_complete(struct wl12xx *wl)
+{
+ int i, result_index, num_complete = 0;
+ struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+ if (unlikely(wl->state != WL12XX_STATE_ON))
+ return;
+
+ /* First we read the result */
+ wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
+ result, sizeof(result));
+
+ result_index = wl->next_tx_complete;
+
+ for (i = 0; i < ARRAY_SIZE(result); i++) {
+ result_ptr = &result[result_index];
+
+ if (result_ptr->done_1 == 1 &&
+ result_ptr->done_2 == 1) {
+ wl12xx_tx_packet_cb(wl, result_ptr);
+
+ result_ptr->done_1 = 0;
+ result_ptr->done_2 = 0;
+
+ result_index = (result_index + 1) &
+ (FW_TX_CMPLT_BLOCK_SIZE - 1);
+ num_complete++;
+ } else {
+ break;
+ }
+ }
+
+ /* Every completed frame needs to be acknowledged */
+ if (num_complete) {
+ /*
+ * If we've wrapped, we have to clear
+ * the results in 2 steps.
+ */
+ if (result_index > wl->next_tx_complete) {
+ /* Only 1 write is needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ num_complete *
+ sizeof(struct tx_result));
+
+
+ } else if (result_index < wl->next_tx_complete) {
+ /* 2 writes are needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ (FW_TX_CMPLT_BLOCK_SIZE -
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ (num_complete -
+ FW_TX_CMPLT_BLOCK_SIZE +
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ } else {
+ /* We have to write the whole array */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ FW_TX_CMPLT_BLOCK_SIZE *
+ sizeof(struct tx_result));
+ }
+
+ }
+
+ wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl12xx_tx_flush(struct wl12xx *wl)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+
+ /* TX failure */
+/* control->flags = 0; FIXME */
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ info = IEEE80211_SKB_CB(skb);
+
+ wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ }
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] != NULL) {
+ skb = wl->tx_frames[i];
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[i] = NULL;
+ }
+}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
new file mode 100644
index 000000000000..dc82691f4c14
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -0,0 +1,215 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_TX_H__
+#define __WL12XX_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ * buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ * buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ * the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ * and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ * host to process the new data. Note: interrupt will be send per packet if
+ * TX complete indication was requested in tx_control or per crossing
+ * aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ * TxDescriptorDone information in a cyclic manner and clears both done_1
+ * and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT 0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
+#define WL12XX_TX_ALIGN_TO 4
+#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
+ ~(WL12XX_TX_ALIGN_TO - 1))
+#define WL12XX_TKIP_IV_SPACE 4
+
+struct tx_control {
+ /* Rate Policy (class) index */
+ unsigned rate_policy:3;
+
+ /* When set, no ack policy is expected */
+ unsigned ack_policy:1;
+
+ /*
+ * Packet type:
+ * 0 -> 802.11
+ * 1 -> 802.3
+ * 2 -> IP
+ * 3 -> raw codec
+ */
+ unsigned packet_type:2;
+
+ /* If set, this is a QoS-Null or QoS-Data frame */
+ unsigned qos:1;
+
+ /*
+ * If set, the target triggers the tx complete INT
+ * upon frame sending completion.
+ */
+ unsigned tx_complete:1;
+
+ /* 2 bytes padding before packet header */
+ unsigned xfer_pad:1;
+
+ unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+ /* Length of payload, including headers. */
+ u16 length;
+
+ /*
+ * A bit mask that specifies the initial rate to be used
+ * Possible values are:
+ * 0x0001 - 1Mbits
+ * 0x0002 - 2Mbits
+ * 0x0004 - 5.5Mbits
+ * 0x0008 - 6Mbits
+ * 0x0010 - 9Mbits
+ * 0x0020 - 11Mbits
+ * 0x0040 - 12Mbits
+ * 0x0080 - 18Mbits
+ * 0x0100 - 22Mbits
+ * 0x0200 - 24Mbits
+ * 0x0400 - 36Mbits
+ * 0x0800 - 48Mbits
+ * 0x1000 - 54Mbits
+ */
+ u16 rate;
+
+ /* Time in us that a packet can spend in the target */
+ u32 expiry_time;
+
+ /* index of the TX queue used for this packet */
+ u8 xmit_queue;
+
+ /* Used to identify a packet */
+ u8 id;
+
+ struct tx_control control;
+
+ /*
+ * The FW should cut the packet into fragments
+ * of this size.
+ */
+ u16 frag_threshold;
+
+ /* Numbers of HW queue blocks to be allocated */
+ u8 num_mem_blocks;
+
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+ TX_SUCCESS = 0,
+ TX_DMA_ERROR = BIT(7),
+ TX_DISABLED = BIT(6),
+ TX_RETRY_EXCEEDED = BIT(5),
+ TX_TIMEOUT = BIT(4),
+ TX_KEY_NOT_FOUND = BIT(3),
+ TX_ENCRYPT_FAIL = BIT(2),
+ TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+ /*
+ * Ownership synchronization between the host and
+ * the firmware. If done_1 and done_2 are cleared,
+ * owned by the FW (no info ready).
+ */
+ u8 done_1;
+
+ /* same as double_buffer_desc->id */
+ u8 id;
+
+ /*
+ * Total air access duration consumed by this
+ * packet, including all retries and overheads.
+ */
+ u16 medium_usage;
+
+ /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+ u32 medium_delay;
+
+ /* Time between host xfer and tx complete */
+ u32 fw_hnadling_time;
+
+ /* The LS-byte of the last TKIP sequence number. */
+ u8 lsb_seq_num;
+
+ /* Retry count */
+ u8 ack_failures;
+
+ /* At which rate we got a ACK */
+ u16 rate;
+
+ u16 reserved;
+
+ /* TX_* */
+ u8 status;
+
+ /* See done_1 */
+ u8 done_2;
+} __attribute__ ((packed));
+
+void wl12xx_tx_work(struct work_struct *work);
+void wl12xx_tx_complete(struct wl12xx *wl);
+void wl12xx_tx_flush(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
new file mode 100644
index 000000000000..bd0decdcad23
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.c
@@ -0,0 +1,709 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+#include "boot.h"
+#include "event.h"
+#include "acx.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+
+static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
+ [PART_DOWN] = {
+ .mem = {
+ .start = 0x00000000,
+ .size = 0x00016800
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = REGISTERS_DOWN_SIZE
+ },
+ },
+
+ [PART_WORK] = {
+ .mem = {
+ .start = 0x00028000,
+ .size = 0x00014000
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = REGISTERS_WORK_SIZE
+ },
+ },
+
+ /* WL1251 doesn't use the DRPW partition, so we don't set it here */
+};
+
+static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
+ [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
+ [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
+ [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
+ [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
+ [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
+ [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+ [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
+ [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
+ [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
+ [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
+ [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_upload_firmware(struct wl12xx *wl)
+{
+ struct wl12xx_partition_set *p_table = wl->chip.p_table;
+ int addr, chunk_num, partition_limit;
+ size_t fw_data_len;
+ u8 *p;
+
+ /* whal_FwCtrl_LoadFwImageSm() */
+
+ wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+ wl12xx_reg_read32(wl, CHIP_ID_B));
+
+ /* 10.0 check firmware length and set partition */
+ fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+ (wl->fw[6] << 8) | (wl->fw[7]);
+
+ wl12xx_debug(DEBUG_BOOT, "fw_data_len %d chunk_size %d", fw_data_len,
+ CHUNK_SIZE);
+
+ if ((fw_data_len % 4) != 0) {
+ wl12xx_error("firmware length not multiple of four");
+ return -EIO;
+ }
+
+ wl12xx_set_partition(wl,
+ p_table[PART_DOWN].mem.start,
+ p_table[PART_DOWN].mem.size,
+ p_table[PART_DOWN].reg.start,
+ p_table[PART_DOWN].reg.size);
+
+ /* 10.1 set partition limit and chunk num */
+ chunk_num = 0;
+ partition_limit = p_table[PART_DOWN].mem.size;
+
+ while (chunk_num < fw_data_len / CHUNK_SIZE) {
+ /* 10.2 update partition, if needed */
+ addr = p_table[PART_DOWN].mem.start +
+ (chunk_num + 2) * CHUNK_SIZE;
+ if (addr > partition_limit) {
+ addr = p_table[PART_DOWN].mem.start +
+ chunk_num * CHUNK_SIZE;
+ partition_limit = chunk_num * CHUNK_SIZE +
+ p_table[PART_DOWN].mem.size;
+ wl12xx_set_partition(wl,
+ addr,
+ p_table[PART_DOWN].mem.size,
+ p_table[PART_DOWN].reg.start,
+ p_table[PART_DOWN].reg.size);
+ }
+
+ /* 10.3 upload the chunk */
+ addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+ p, addr);
+ wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+
+ chunk_num++;
+ }
+
+ /* 10.4 upload the last chunk */
+ addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%d B) 0x%p to 0x%x",
+ fw_data_len % CHUNK_SIZE, p, addr);
+ wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+ return 0;
+}
+
+static int wl1251_upload_nvs(struct wl12xx *wl)
+{
+ size_t nvs_len, nvs_bytes_written, burst_len;
+ int nvs_start, i;
+ u32 dest_addr, val;
+ u8 *nvs_ptr, *nvs;
+
+ nvs = wl->nvs;
+ if (nvs == NULL)
+ return -ENODEV;
+
+ nvs_ptr = nvs;
+
+ nvs_len = wl->nvs_len;
+ nvs_start = wl->fw_len;
+
+ /*
+ * Layout before the actual NVS tables:
+ * 1 byte : burst length.
+ * 2 bytes: destination address.
+ * n bytes: data to burst copy.
+ *
+ * This is ended by a 0 length, then the NVS tables.
+ */
+
+ while (nvs_ptr[0]) {
+ burst_len = nvs_ptr[0];
+ dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+ /* We move our pointer to the data */
+ nvs_ptr += 3;
+
+ for (i = 0; i < burst_len; i++) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ wl12xx_debug(DEBUG_BOOT,
+ "nvs burst write 0x%x: 0x%x",
+ dest_addr, val);
+ wl12xx_mem_write32(wl, dest_addr, val);
+
+ nvs_ptr += 4;
+ dest_addr += 4;
+ }
+ }
+
+ /*
+ * We've reached the first zero length, the first NVS table
+ * is 7 bytes further.
+ */
+ nvs_ptr += 7;
+ nvs_len -= nvs_ptr - nvs;
+ nvs_len = ALIGN(nvs_len, 4);
+
+ /* Now we must set the partition correctly */
+ wl12xx_set_partition(wl, nvs_start,
+ wl->chip.p_table[PART_DOWN].mem.size,
+ wl->chip.p_table[PART_DOWN].reg.start,
+ wl->chip.p_table[PART_DOWN].reg.size);
+
+ /* And finally we upload the NVS tables */
+ nvs_bytes_written = 0;
+ while (nvs_bytes_written < nvs_len) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ val = cpu_to_le32(val);
+
+ wl12xx_debug(DEBUG_BOOT,
+ "nvs write table 0x%x: 0x%x",
+ nvs_start, val);
+ wl12xx_mem_write32(wl, nvs_start, val);
+
+ nvs_ptr += 4;
+ nvs_bytes_written += 4;
+ nvs_start += 4;
+ }
+
+ return 0;
+}
+
+static int wl1251_boot(struct wl12xx *wl)
+{
+ int ret = 0, minor_minor_e2_ver;
+ u32 tmp, boot_data;
+
+ ret = wl12xx_boot_soft_reset(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 2. start processing NVS file */
+ ret = wl->chip.op_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ /* write firmware's last address (ie. it's length) to
+ * ACX_EEPROMLESS_IND_REG */
+ wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+ /* 6. read the EEPROM parameters */
+ tmp = wl12xx_reg_read32(wl, SCR_PAD2);
+
+ /* 7. read bootdata */
+ wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+ wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+ tmp = wl12xx_reg_read32(wl, SCR_PAD3);
+
+ /* 8. check bootdata and call restart sequence */
+ wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+ minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+ wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+ "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+ wl->boot_attr.radio_type, wl->boot_attr.major,
+ wl->boot_attr.minor, minor_minor_e2_ver);
+
+ ret = wl12xx_boot_init_seq(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 9. NVS processing done */
+ boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+ /* 10. check that ECPU_CONTROL_HALT bits are set in
+ * pWhalBus->uBootData and start uploading firmware
+ */
+ if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+ wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = wl->chip.op_upload_fw(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 10.5 start firmware */
+ ret = wl12xx_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ /* Get and save the firmware version */
+ wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
+
+out:
+ return ret;
+}
+
+static int wl1251_mem_cfg(struct wl12xx *wl)
+{
+ struct wl1251_acx_config_memory mem_conf;
+ int ret, i;
+
+ wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
+
+ /* memory config */
+ mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+ mem_conf.mem_config.rx_mem_block_num = 35;
+ mem_conf.mem_config.tx_min_mem_block_num = 64;
+ mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
+ mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
+ mem_conf.mem_config.num_ssid_profiles = 1;
+ mem_conf.mem_config.debug_buffer_size =
+ cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+ /* RX queue config */
+ mem_conf.rx_queue_config.dma_address = 0;
+ mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+ mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+ mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+ /* TX queue config */
+ for (i = 0; i < MAX_TX_QUEUES; i++) {
+ mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+ mem_conf.tx_queue_config[i].attributes = i;
+ }
+
+ mem_conf.header.id = ACX_MEM_CFG;
+ mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
+ sizeof(struct acx_header);
+ mem_conf.header.len -=
+ (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
+ sizeof(struct wl1251_acx_tx_queue_config);
+
+ ret = wl12xx_cmd_configure(wl, &mem_conf,
+ sizeof(struct wl1251_acx_config_memory));
+ if (ret < 0)
+ wl12xx_warning("wl1251 mem config failed: %d", ret);
+
+ return ret;
+}
+
+static int wl1251_hw_init_mem_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl1251_mem_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+ GFP_KERNEL);
+ if (!wl->target_mem_map) {
+ wl12xx_error("couldn't allocate target memory map");
+ return -ENOMEM;
+ }
+
+ /* we now ask for the firmware built memory map */
+ ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
+ sizeof(struct wl1251_acx_mem_map));
+ if (ret < 0) {
+ wl12xx_error("couldn't retrieve firmware memory map");
+ kfree(wl->target_mem_map);
+ wl->target_mem_map = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
+{
+ u32 cpu_ctrl;
+
+ /* 10.5.0 run the firmware (I) */
+ cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ /* 10.5.1 run the firmware (II) */
+ cpu_ctrl &= ~flag;
+ wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1251_target_enable_interrupts(struct wl12xx *wl)
+{
+ /* Enable target's interrupts */
+ wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+ WL1251_ACX_INTR_RX1_DATA |
+ WL1251_ACX_INTR_TX_RESULT |
+ WL1251_ACX_INTR_EVENT_A |
+ WL1251_ACX_INTR_EVENT_B |
+ WL1251_ACX_INTR_INIT_COMPLETE;
+ wl12xx_boot_target_enable_interrupts(wl);
+}
+
+static void wl1251_irq_work(struct work_struct *work)
+{
+ u32 intr;
+ struct wl12xx *wl =
+ container_of(work, struct wl12xx, irq_work);
+
+ mutex_lock(&wl->mutex);
+
+ wl12xx_debug(DEBUG_IRQ, "IRQ work");
+
+ if (wl->state == WL12XX_STATE_OFF)
+ goto out;
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+ wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+ if (wl->data_path) {
+ wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
+ &wl->rx_counter, sizeof(u32));
+
+ /* We handle a frmware bug here */
+ switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+ case 0:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
+ intr &= ~WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 1:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 2:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr |= WL1251_ACX_INTR_RX1_DATA;
+ break;
+ default:
+ wl12xx_warning("RX: FW and host out of sync: %d",
+ wl->rx_counter - wl->rx_handled);
+ break;
+ }
+
+ wl->rx_handled = wl->rx_counter;
+
+
+ wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+ }
+
+ intr &= wl->intr_mask;
+
+ if (intr == 0) {
+ wl12xx_debug(DEBUG_IRQ, "INTR is 0");
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ ~(wl->intr_mask));
+
+ goto out_sleep;
+ }
+
+ if (intr & WL1251_ACX_INTR_RX0_DATA) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+ wl12xx_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_RX1_DATA) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+ wl12xx_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_TX_RESULT) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+ wl12xx_tx_complete(wl);
+ }
+
+ if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+ if (intr & WL1251_ACX_INTR_EVENT_A)
+ wl12xx_event_handle(wl, 0);
+ else
+ wl12xx_event_handle(wl, 1);
+ }
+
+ if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+ wl12xx_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+ struct acx_tx_queue_qos_config *config,
+ u32 num_blocks)
+{
+ config->qid = qid;
+
+ switch (qid) {
+ case QOS_AC_BE:
+ config->high_threshold =
+ (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_BK:
+ config->high_threshold =
+ (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VI:
+ config->high_threshold =
+ (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VO:
+ config->high_threshold =
+ (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+ break;
+ default:
+ wl12xx_error("Invalid TX queue id: %d", qid);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
+{
+ struct acx_tx_queue_qos_config config;
+ struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+ int ret, i;
+
+ wl12xx_debug(DEBUG_ACX, "acx tx queue config");
+
+ config.header.id = ACX_TX_QUEUE_CFG;
+ config.header.len = sizeof(struct acx_tx_queue_qos_config) -
+ sizeof(struct acx_header);
+
+ for (i = 0; i < MAX_NUM_OF_AC; i++) {
+ ret = wl1251_hw_init_txq_fill(i, &config,
+ wl_mem_map->num_tx_mem_blocks);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
+{
+ int ret;
+
+ /* asking for the data path parameters */
+ wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+ GFP_KERNEL);
+ if (!wl->data_path) {
+ wl12xx_error("Couldnt allocate data path parameters");
+ return -ENOMEM;
+ }
+
+ ret = wl12xx_acx_data_path_params(wl, wl->data_path);
+ if (ret < 0) {
+ kfree(wl->data_path);
+ wl->data_path = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init(struct wl12xx *wl)
+{
+ struct wl1251_acx_mem_map *wl_mem_map;
+ int ret;
+
+ ret = wl12xx_hw_init_hwenc_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Template settings */
+ ret = wl12xx_hw_init_templates_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default memory configuration */
+ ret = wl1251_hw_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default data path configuration */
+ ret = wl1251_hw_init_data_path_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* RX config */
+ ret = wl12xx_hw_init_rx_config(wl,
+ RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+ RX_FILTER_OPTION_DEF);
+ /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+ RX_FILTER_OPTION_FILTER_ALL); */
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* TX queues config */
+ ret = wl1251_hw_init_tx_queue_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* PHY layer config */
+ ret = wl12xx_hw_init_phy_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacon filtering */
+ ret = wl12xx_hw_init_beacon_filter(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Bluetooth WLAN coexistence */
+ ret = wl12xx_hw_init_pta(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Energy detection */
+ ret = wl12xx_hw_init_energy_detection(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacons and boradcast settings */
+ ret = wl12xx_hw_init_beacon_broadcast(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Enable data path */
+ ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Default power state */
+ ret = wl12xx_hw_init_power_auth(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ wl_mem_map = wl->target_mem_map;
+ wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+ wl_mem_map->num_tx_mem_blocks,
+ wl->data_path->tx_control_addr,
+ wl_mem_map->num_rx_mem_blocks,
+ wl->data_path->rx_control_addr);
+
+ return 0;
+
+ out_free_data_path:
+ kfree(wl->data_path);
+
+ out_free_memmap:
+ kfree(wl->target_mem_map);
+
+ return ret;
+}
+
+static int wl1251_plt_init(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl1251_hw_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl1251_setup(struct wl12xx *wl)
+{
+ /* FIXME: Is it better to use strncpy here or is this ok? */
+ wl->chip.fw_filename = WL1251_FW_NAME;
+ wl->chip.nvs_filename = WL1251_NVS_NAME;
+
+ /* Now we know what chip we're using, so adjust the power on sleep
+ * time accordingly */
+ wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
+
+ wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
+ wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
+
+ wl->chip.op_upload_nvs = wl1251_upload_nvs;
+ wl->chip.op_upload_fw = wl1251_upload_firmware;
+ wl->chip.op_boot = wl1251_boot;
+ wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
+ wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
+ wl->chip.op_hw_init = wl1251_hw_init;
+ wl->chip.op_plt_init = wl1251_plt_init;
+
+ wl->chip.p_table = wl1251_part_table;
+ wl->chip.acx_reg_table = wl1251_acx_reg_table;
+
+ INIT_WORK(&wl->irq_work, wl1251_irq_work);
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
new file mode 100644
index 000000000000..1f4a44330394
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -0,0 +1,165 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_H__
+#define __WL1251_H__
+
+#include <linux/bitops.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+void wl1251_setup(struct wl12xx *wl);
+
+
+struct wl1251_acx_memory {
+ __le16 num_stations; /* number of STAs to be supported. */
+ u16 reserved_1;
+
+ /*
+ * Nmber of memory buffers for the RX mem pool.
+ * The actual number may be less if there are
+ * not enough blocks left for the minimum num
+ * of TX ones.
+ */
+ u8 rx_mem_block_num;
+ u8 reserved_2;
+ u8 num_tx_queues; /* From 1 to 16 */
+ u8 host_if_options; /* HOST_IF* */
+ u8 tx_min_mem_block_num;
+ u8 num_ssid_profiles;
+ __le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN 1
+#define ACX_RX_DESC_MAX 127
+#define ACX_RX_DESC_DEF 32
+struct wl1251_acx_rx_queue_config {
+ u8 num_descs;
+ u8 pad;
+ u8 type;
+ u8 priority;
+ __le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN 1
+#define ACX_TX_DESC_MAX 127
+#define ACX_TX_DESC_DEF 16
+struct wl1251_acx_tx_queue_config {
+ u8 num_descs;
+ u8 pad[2];
+ u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+ struct acx_header header;
+
+ struct wl1251_acx_memory mem_config;
+ struct wl1251_acx_rx_queue_config rx_queue_config;
+ struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+ struct acx_header header;
+
+ void *code_start;
+ void *code_end;
+
+ void *wep_defkey_start;
+ void *wep_defkey_end;
+
+ void *sta_table_start;
+ void *sta_table_end;
+
+ void *packet_template_start;
+ void *packet_template_end;
+
+ void *queue_memory_start;
+ void *queue_memory_end;
+
+ void *packet_memory_pool_start;
+ void *packet_memory_pool_end;
+
+ void *debug_buffer1_start;
+ void *debug_buffer1_end;
+
+ void *debug_buffer2_start;
+ void *debug_buffer2_end;
+
+ /* Number of blocks FW allocated for TX packets */
+ u32 num_tx_mem_blocks;
+
+ /* Number of blocks FW allocated for RX packets */
+ u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+ Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14)
+
+#define WL1251_ACX_INTR_ALL 0xFFFFFFFF
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
new file mode 100644
index 000000000000..48641437414b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -0,0 +1,409 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl12xx"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+ DEBUG_NONE = 0,
+ DEBUG_IRQ = BIT(0),
+ DEBUG_SPI = BIT(1),
+ DEBUG_BOOT = BIT(2),
+ DEBUG_MAILBOX = BIT(3),
+ DEBUG_NETLINK = BIT(4),
+ DEBUG_EVENT = BIT(5),
+ DEBUG_TX = BIT(6),
+ DEBUG_RX = BIT(7),
+ DEBUG_SCAN = BIT(8),
+ DEBUG_CRYPT = BIT(9),
+ DEBUG_PSM = BIT(10),
+ DEBUG_MAC80211 = BIT(11),
+ DEBUG_CMD = BIT(12),
+ DEBUG_ACX = BIT(13),
+ DEBUG_ALL = ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl12xx_error(fmt, arg...) \
+ printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl12xx_warning(fmt, arg...) \
+ printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl12xx_notice(fmt, arg...) \
+ printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_info(fmt, arg...) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_debug(level, fmt, arg...) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+ } while (0)
+
+#define wl12xx_dump(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ 0); \
+ } while (0)
+
+#define wl12xx_dump_ascii(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ true); \
+ } while (0)
+
+#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
+ CFG_BSSID_FILTER_EN)
+
+#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
+ CFG_RX_MGMT_EN | \
+ CFG_RX_DATA_EN | \
+ CFG_RX_CTL_EN | \
+ CFG_RX_BCN_EN | \
+ CFG_RX_AUTH_EN | \
+ CFG_RX_ASSOC_EN)
+
+
+struct boot_attr {
+ u32 radio_type;
+ u8 mac_clock;
+ u8 arm_clock;
+ int firmware_debug;
+ u32 minor;
+ u32 major;
+ u32 bugfix;
+};
+
+enum wl12xx_state {
+ WL12XX_STATE_OFF,
+ WL12XX_STATE_ON,
+ WL12XX_STATE_PLT,
+};
+
+enum wl12xx_partition_type {
+ PART_DOWN,
+ PART_WORK,
+ PART_DRPW,
+
+ PART_TABLE_LEN
+};
+
+struct wl12xx_partition {
+ u32 size;
+ u32 start;
+};
+
+struct wl12xx_partition_set {
+ struct wl12xx_partition mem;
+ struct wl12xx_partition reg;
+};
+
+struct wl12xx;
+
+/* FIXME: I'm not sure about this structure name */
+struct wl12xx_chip {
+ u32 id;
+
+ const char *fw_filename;
+ const char *nvs_filename;
+
+ char fw_ver[21];
+
+ unsigned int power_on_sleep;
+ int intr_cmd_complete;
+ int intr_init_complete;
+
+ int (*op_upload_fw)(struct wl12xx *wl);
+ int (*op_upload_nvs)(struct wl12xx *wl);
+ int (*op_boot)(struct wl12xx *wl);
+ void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag);
+ void (*op_target_enable_interrupts)(struct wl12xx *wl);
+ int (*op_hw_init)(struct wl12xx *wl);
+ int (*op_plt_init)(struct wl12xx *wl);
+
+ struct wl12xx_partition_set *p_table;
+ enum wl12xx_acx_int_reg *acx_reg_table;
+};
+
+struct wl12xx_stats {
+ struct acx_statistics *fw_stats;
+ unsigned long fw_stats_update;
+
+ unsigned int retry_count;
+ unsigned int excessive_retries;
+};
+
+struct wl12xx_debugfs {
+ struct dentry *rootdir;
+ struct dentry *fw_statistics;
+
+ struct dentry *tx_internal_desc_overflow;
+
+ struct dentry *rx_out_of_mem;
+ struct dentry *rx_hdr_overflow;
+ struct dentry *rx_hw_stuck;
+ struct dentry *rx_dropped;
+ struct dentry *rx_fcs_err;
+ struct dentry *rx_xfr_hint_trig;
+ struct dentry *rx_path_reset;
+ struct dentry *rx_reset_counter;
+
+ struct dentry *dma_rx_requested;
+ struct dentry *dma_rx_errors;
+ struct dentry *dma_tx_requested;
+ struct dentry *dma_tx_errors;
+
+ struct dentry *isr_cmd_cmplt;
+ struct dentry *isr_fiqs;
+ struct dentry *isr_rx_headers;
+ struct dentry *isr_rx_mem_overflow;
+ struct dentry *isr_rx_rdys;
+ struct dentry *isr_irqs;
+ struct dentry *isr_tx_procs;
+ struct dentry *isr_decrypt_done;
+ struct dentry *isr_dma0_done;
+ struct dentry *isr_dma1_done;
+ struct dentry *isr_tx_exch_complete;
+ struct dentry *isr_commands;
+ struct dentry *isr_rx_procs;
+ struct dentry *isr_hw_pm_mode_changes;
+ struct dentry *isr_host_acknowledges;
+ struct dentry *isr_pci_pm;
+ struct dentry *isr_wakeups;
+ struct dentry *isr_low_rssi;
+
+ struct dentry *wep_addr_key_count;
+ struct dentry *wep_default_key_count;
+ /* skipping wep.reserved */
+ struct dentry *wep_key_not_found;
+ struct dentry *wep_decrypt_fail;
+ struct dentry *wep_packets;
+ struct dentry *wep_interrupt;
+
+ struct dentry *pwr_ps_enter;
+ struct dentry *pwr_elp_enter;
+ struct dentry *pwr_missing_bcns;
+ struct dentry *pwr_wake_on_host;
+ struct dentry *pwr_wake_on_timer_exp;
+ struct dentry *pwr_tx_with_ps;
+ struct dentry *pwr_tx_without_ps;
+ struct dentry *pwr_rcvd_beacons;
+ struct dentry *pwr_power_save_off;
+ struct dentry *pwr_enable_ps;
+ struct dentry *pwr_disable_ps;
+ struct dentry *pwr_fix_tsf_ps;
+ /* skipping cont_miss_bcns_spread for now */
+ struct dentry *pwr_rcvd_awake_beacons;
+
+ struct dentry *mic_rx_pkts;
+ struct dentry *mic_calc_failure;
+
+ struct dentry *aes_encrypt_fail;
+ struct dentry *aes_decrypt_fail;
+ struct dentry *aes_encrypt_packets;
+ struct dentry *aes_decrypt_packets;
+ struct dentry *aes_encrypt_interrupt;
+ struct dentry *aes_decrypt_interrupt;
+
+ struct dentry *event_heart_beat;
+ struct dentry *event_calibration;
+ struct dentry *event_rx_mismatch;
+ struct dentry *event_rx_mem_empty;
+ struct dentry *event_rx_pool;
+ struct dentry *event_oom_late;
+ struct dentry *event_phy_transmit_error;
+ struct dentry *event_tx_stuck;
+
+ struct dentry *ps_pspoll_timeouts;
+ struct dentry *ps_upsd_timeouts;
+ struct dentry *ps_upsd_max_sptime;
+ struct dentry *ps_upsd_max_apturn;
+ struct dentry *ps_pspoll_max_apturn;
+ struct dentry *ps_pspoll_utilization;
+ struct dentry *ps_upsd_utilization;
+
+ struct dentry *rxpipe_rx_prep_beacon_drop;
+ struct dentry *rxpipe_descr_host_int_trig_rx_data;
+ struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+ struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+ struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+ struct dentry *tx_queue_len;
+
+ struct dentry *retry_count;
+ struct dentry *excessive_retries;
+};
+
+struct wl12xx {
+ struct ieee80211_hw *hw;
+ bool mac80211_registered;
+
+ struct spi_device *spi;
+
+ void (*set_power)(bool enable);
+ int irq;
+
+ enum wl12xx_state state;
+ struct mutex mutex;
+
+ int physical_mem_addr;
+ int physical_reg_addr;
+ int virtual_mem_addr;
+ int virtual_reg_addr;
+
+ struct wl12xx_chip chip;
+
+ int cmd_box_addr;
+ int event_box_addr;
+ struct boot_attr boot_attr;
+
+ u8 *fw;
+ size_t fw_len;
+ u8 *nvs;
+ size_t nvs_len;
+
+ u8 bssid[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
+ u8 bss_type;
+ u8 listen_int;
+ int channel;
+
+ void *target_mem_map;
+ struct acx_data_path_params_resp *data_path;
+
+ /* Number of TX packets transferred to the FW, modulo 16 */
+ u32 data_in_count;
+
+ /* Frames scheduled for transmission, not handled yet */
+ struct sk_buff_head tx_queue;
+ bool tx_queue_stopped;
+
+ struct work_struct tx_work;
+ struct work_struct filter_work;
+
+ /* Pending TX frames */
+ struct sk_buff *tx_frames[16];
+
+ /*
+ * Index pointing to the next TX complete entry
+ * in the cyclic XT complete array we get from
+ * the FW.
+ */
+ u32 next_tx_complete;
+
+ /* FW Rx counter */
+ u32 rx_counter;
+
+ /* Rx frames handled */
+ u32 rx_handled;
+
+ /* Current double buffer */
+ u32 rx_current_buffer;
+ u32 rx_last_id;
+
+ /* The target interrupt mask */
+ u32 intr_mask;
+ struct work_struct irq_work;
+
+ /* The mbox event mask */
+ u32 event_mask;
+
+ /* Mailbox pointers */
+ u32 mbox_ptr[2];
+
+ /* Are we currently scanning */
+ bool scanning;
+
+ /* Our association ID */
+ u16 aid;
+
+ /* Default key (for WEP) */
+ u32 default_key;
+
+ unsigned int tx_mgmt_frm_rate;
+ unsigned int tx_mgmt_frm_mod;
+
+ unsigned int rx_config;
+ unsigned int rx_filter;
+
+ /* is firmware in elp mode */
+ bool elp;
+
+ /* we can be in psm, but not in elp, we have to differentiate */
+ bool psm;
+
+ /* PSM mode requested */
+ bool psm_requested;
+
+ /* in dBm */
+ int power_level;
+
+ struct wl12xx_stats stats;
+ struct wl12xx_debugfs debugfs;
+};
+
+int wl12xx_plt_start(struct wl12xx *wl);
+int wl12xx_plt_stop(struct wl12xx *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL12XX_DEFAULT_POWER_LEVEL 20
+
+#define WL12XX_TX_QUEUE_MAX_LENGTH 20
+
+/* Different chips need different sleep times after power on. WL1271 needs
+ * 200ms, WL1251 needs only 10ms. By default we use 200ms, but as soon as we
+ * know the chip ID, we change the sleep value in the wl12xx chip structure,
+ * so in subsequent power ons, we don't waste more time then needed. */
+#define WL12XX_DEFAULT_POWER_ON_SLEEP 200
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+#define CHIP_ID_1271_PG10 (0x4030101)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
new file mode 100644
index 000000000000..657c2dbcb7d3
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -0,0 +1,156 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define COUNTRY_STRING_LEN 3
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 da[ETH_ALEN];
+ u8 sa[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_header {
+ u8 id;
+ u8 len;
+} __attribute__ ((packed));
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+ struct wl12xx_ie_header header;
+ char ssid[IW_ESSID_MAX_SIZE];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_rates {
+ struct wl12xx_ie_header header;
+ u8 rates[MAX_SUPPORTED_RATES];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_ds_params {
+ struct wl12xx_ie_header header;
+ u8 channel;
+} __attribute__ ((packed));
+
+struct country_triplet {
+ u8 channel;
+ u8 num_channels;
+ u8 max_tx_power;
+} __attribute__ ((packed));
+
+struct wl12xx_ie_country {
+ struct wl12xx_ie_header header;
+ u8 country_string[COUNTRY_STRING_LEN];
+ struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __attribute__ ((packed));
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+struct wl12xx_null_data_template {
+ struct ieee80211_header header;
+} __attribute__ ((packed));
+
+struct wl12xx_ps_poll_template {
+ u16 fc;
+ u16 aid;
+ u8 bssid[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct wl12xx_qos_null_data_template {
+ struct ieee80211_header header;
+ __le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct wl12xx_probe_req_template {
+ struct ieee80211_header header;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+} __attribute__ ((packed));
+
+
+struct wl12xx_probe_resp_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+#endif