summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorAlvaro Gamez Machado <alvaro.gamez@hazent.com>2018-06-08 12:23:39 +0200
committerDavid S. Miller <davem@davemloft.net>2018-06-10 12:38:03 -0700
commitb718e8c8f4f5920aaddc2e52d5e32f494c91129c (patch)
treef7147d1b843d1f8219bba61bb006f3e0da6f6fec /drivers/net
parent6d8c50dcb029872b298eea68cc6209c866fd3e14 (diff)
net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620
DP83620 register set is compatible with the DP83848, but it also supports 100base-FX. When the hardware is configured such as that fiber mode is enabled, autonegotiation is not possible. The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE. Instead, this bit is always set high, even if the particular hardware configuration makes it so that auto negotiation is not possible [1]. Under these circumstances, the phy subsystem keeps trying for autonegotiation to happen, without success. Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on reset is set to 0 when auto negotiation is disabled, and so we use this value instead of BMSR_ANEGCAPABLE. [1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170 Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/phy/dp83848.c35
1 files changed, 29 insertions, 6 deletions
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index cd09c3af2117..6e8e42361fd5 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -74,6 +74,25 @@ static int dp83848_config_intr(struct phy_device *phydev)
return phy_write(phydev, DP83848_MICR, control);
}
+static int dp83848_config_init(struct phy_device *phydev)
+{
+ int err;
+ int val;
+
+ err = genphy_config_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
+ * we check initial value of BMCR Auto negotiation enable bit
+ */
+ val = phy_read(phydev, MII_BMCR);
+ if (!(val & BMCR_ANENABLE))
+ phydev->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
{ TI_DP83848C_PHY_ID, 0xfffffff0 },
{ NS_DP83848C_PHY_ID, 0xfffffff0 },
@@ -83,7 +102,7 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
-#define DP83848_PHY_DRIVER(_id, _name) \
+#define DP83848_PHY_DRIVER(_id, _name, _config_init) \
{ \
.phy_id = _id, \
.phy_id_mask = 0xfffffff0, \
@@ -92,7 +111,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
.flags = PHY_HAS_INTERRUPT, \
\
.soft_reset = genphy_soft_reset, \
- .config_init = genphy_config_init, \
+ .config_init = _config_init, \
.suspend = genphy_suspend, \
.resume = genphy_resume, \
\
@@ -102,10 +121,14 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
}
static struct phy_driver dp83848_driver[] = {
- DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"),
- DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"),
- DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY"),
- DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
+ genphy_config_init),
+ DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
+ genphy_config_init),
+ DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
+ dp83848_config_init),
+ DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
+ genphy_config_init),
};
module_phy_driver(dp83848_driver);