Intel IOMMU: DMAR detection and parsing logic

This patch supports the upcomming Intel IOMMU hardware a.k.a.  Intel(R)
Virtualization Technology for Directed I/O Architecture and the hardware spec
for the same can be found here
http://www.intel.com/technology/virtualization/index.htm

FAQ! (questions from akpm, answers from ak)

> So...  what's all this code for?
>
> I assume that the intent here is to speed things up under Xen, etc?

Yes in some cases, but not this code.  That would be the Xen version of this
code that could potentially assign whole devices to guests.  I expect this to
be only useful in some special cases though because most hardware is not
virtualizable and you typically want an own instance for each guest.

Ok at some point KVM might implement this too; i likely would use this code
for this.

> Do we
> have any benchmark results to help us to decide whether a merge would be
> justified?

The main advantage for doing it in the normal kernel is not performance, but
more safety.  Broken devices won't be able to corrupt memory by doing random
DMA.

Unfortunately that doesn't work for graphics yet, for that need user space
interfaces for the X server are needed.

There are some potential performance benefits too:

- When you have a device that cannot address the complete address range an
  IOMMU can remap its memory instead of bounce buffering.  Remapping is likely
  cheaper than copying.

- The IOMMU can merge sg lists into a single virtual block.  This could
  potentially speed up SG IO when the device is slow walking SG lists.  [I
  long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but
  it probably depends a lot on the HBA]

And you get better driver debugging because unexpected memory accesses from
the devices will cause a trappable event.

>
> Does it slow anything down?

It adds more overhead to each IO so yes.

This patch:

Add support for early detection and parsing of DMAR's (DMA Remapping) reported
to OS via ACPI tables.

DMA remapping(DMAR) devices support enables independent address translations
for Direct Memory Access(DMA) from Devices.  These DMA remapping devices are
reported via ACPI tables and includes pci device scope covered by these DMA
remapping device.

For detailed info on the specification of "Intel(R) Virtualization Technology
for Directed I/O Architecture" please see
http://www.intel.com/technology/virtualization/index.htm

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 329 insertions, 0 deletions

diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
new file mode 100644
index 000000000000..5dfdfdac92e1
--- /dev/null
+++ b/drivers/pci/dmar.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * 	Copyright (C) Ashok Raj <ashok.raj@intel.com>
+ *	Copyright (C) Shaohua Li <shaohua.li@intel.com>
+ *	Copyright (C) Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *
+ * 	This file implements early detection/parsing of DMA Remapping Devices
+ * reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
+ * tables.
+ */
+
+#include <linux/pci.h>
+#include <linux/dmar.h>
+
+#undef PREFIX
+#define PREFIX "DMAR:"
+
+/* No locks are needed as DMA remapping hardware unit
+ * list is constructed at boot time and hotplug of
+ * these units are not supported by the architecture.
+ */
+LIST_HEAD(dmar_drhd_units);
+LIST_HEAD(dmar_rmrr_units);
+
+static struct acpi_table_header * __initdata dmar_tbl;
+
+static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
+{
+	/*
+	 * add INCLUDE_ALL at the tail, so scan the list will find it at
+	 * the very end.
+	 */
+	if (drhd->include_all)
+		list_add_tail(&drhd->list, &dmar_drhd_units);
+	else
+		list_add(&drhd->list, &dmar_drhd_units);
+}
+
+static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
+{
+	list_add(&rmrr->list, &dmar_rmrr_units);
+}
+
+static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
+					   struct pci_dev **dev, u16 segment)
+{
+	struct pci_bus *bus;
+	struct pci_dev *pdev = NULL;
+	struct acpi_dmar_pci_path *path;
+	int count;
+
+	bus = pci_find_bus(segment, scope->bus);
+	path = (struct acpi_dmar_pci_path *)(scope + 1);
+	count = (scope->length - sizeof(struct acpi_dmar_device_scope))
+		/ sizeof(struct acpi_dmar_pci_path);
+
+	while (count) {
+		if (pdev)
+			pci_dev_put(pdev);
+		/*
+		 * Some BIOSes list non-exist devices in DMAR table, just
+		 * ignore it
+		 */
+		if (!bus) {
+			printk(KERN_WARNING
+			PREFIX "Device scope bus [%d] not found\n",
+			scope->bus);
+			break;
+		}
+		pdev = pci_get_slot(bus, PCI_DEVFN(path->dev, path->fn));
+		if (!pdev) {
+			printk(KERN_WARNING PREFIX
+			"Device scope device [%04x:%02x:%02x.%02x] not found\n",
+				segment, bus->number, path->dev, path->fn);
+			break;
+		}
+		path ++;
+		count --;
+		bus = pdev->subordinate;
+	}
+	if (!pdev) {
+		printk(KERN_WARNING PREFIX
+		"Device scope device [%04x:%02x:%02x.%02x] not found\n",
+		segment, scope->bus, path->dev, path->fn);
+		*dev = NULL;
+		return 0;
+	}
+	if ((scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT && \
+			pdev->subordinate) || (scope->entry_type == \
+			ACPI_DMAR_SCOPE_TYPE_BRIDGE && !pdev->subordinate)) {
+		pci_dev_put(pdev);
+		printk(KERN_WARNING PREFIX
+			"Device scope type does not match for %s\n",
+			 pci_name(pdev));
+		return -EINVAL;
+	}
+	*dev = pdev;
+	return 0;
+}
+
+static int __init dmar_parse_dev_scope(void *start, void *end, int *cnt,
+				       struct pci_dev ***devices, u16 segment)
+{
+	struct acpi_dmar_device_scope *scope;
+	void * tmp = start;
+	int index;
+	int ret;
+
+	*cnt = 0;
+	while (start < end) {
+		scope = start;
+		if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+		    scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE)
+			(*cnt)++;
+		else
+			printk(KERN_WARNING PREFIX
+				"Unsupported device scope\n");
+		start += scope->length;
+	}
+	if (*cnt == 0)
+		return 0;
+
+	*devices = kcalloc(*cnt, sizeof(struct pci_dev *), GFP_KERNEL);
+	if (!*devices)
+		return -ENOMEM;
+
+	start = tmp;
+	index = 0;
+	while (start < end) {
+		scope = start;
+		if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+		    scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE) {
+			ret = dmar_parse_one_dev_scope(scope,
+				&(*devices)[index], segment);
+			if (ret) {
+				kfree(*devices);
+				return ret;
+			}
+			index ++;
+		}
+		start += scope->length;
+	}
+
+	return 0;
+}
+
+/**
+ * dmar_parse_one_drhd - parses exactly one DMA remapping hardware definition
+ * structure which uniquely represent one DMA remapping hardware unit
+ * present in the platform
+ */
+static int __init
+dmar_parse_one_drhd(struct acpi_dmar_header *header)
+{
+	struct acpi_dmar_hardware_unit *drhd;
+	struct dmar_drhd_unit *dmaru;
+	int ret = 0;
+	static int include_all;
+
+	dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
+	if (!dmaru)
+		return -ENOMEM;
+
+	drhd = (struct acpi_dmar_hardware_unit *)header;
+	dmaru->reg_base_addr = drhd->address;
+	dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
+
+	if (!dmaru->include_all)
+		ret = dmar_parse_dev_scope((void *)(drhd + 1),
+				((void *)drhd) + header->length,
+				&dmaru->devices_cnt, &dmaru->devices,
+				drhd->segment);
+	else {
+		/* Only allow one INCLUDE_ALL */
+		if (include_all) {
+			printk(KERN_WARNING PREFIX "Only one INCLUDE_ALL "
+				"device scope is allowed\n");
+			ret = -EINVAL;
+		}
+		include_all = 1;
+	}
+
+	if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
+		kfree(dmaru);
+	else
+		dmar_register_drhd_unit(dmaru);
+	return ret;
+}
+
+static int __init
+dmar_parse_one_rmrr(struct acpi_dmar_header *header)
+{
+	struct acpi_dmar_reserved_memory *rmrr;
+	struct dmar_rmrr_unit *rmrru;
+	int ret = 0;
+
+	rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
+	if (!rmrru)
+		return -ENOMEM;
+
+	rmrr = (struct acpi_dmar_reserved_memory *)header;
+	rmrru->base_address = rmrr->base_address;
+	rmrru->end_address = rmrr->end_address;
+	ret = dmar_parse_dev_scope((void *)(rmrr + 1),
+		((void *)rmrr) + header->length,
+		&rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
+
+	if (ret || (rmrru->devices_cnt == 0))
+		kfree(rmrru);
+	else
+		dmar_register_rmrr_unit(rmrru);
+	return ret;
+}
+
+static void __init
+dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
+{
+	struct acpi_dmar_hardware_unit *drhd;
+	struct acpi_dmar_reserved_memory *rmrr;
+
+	switch (header->type) {
+	case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+		drhd = (struct acpi_dmar_hardware_unit *)header;
+		printk (KERN_INFO PREFIX
+			"DRHD (flags: 0x%08x)base: 0x%016Lx\n",
+			drhd->flags, drhd->address);
+		break;
+	case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+		rmrr = (struct acpi_dmar_reserved_memory *)header;
+
+		printk (KERN_INFO PREFIX
+			"RMRR base: 0x%016Lx end: 0x%016Lx\n",
+			rmrr->base_address, rmrr->end_address);
+		break;
+	}
+}
+
+/**
+ * parse_dmar_table - parses the DMA reporting table
+ */
+static int __init
+parse_dmar_table(void)
+{
+	struct acpi_table_dmar *dmar;
+	struct acpi_dmar_header *entry_header;
+	int ret = 0;
+
+	dmar = (struct acpi_table_dmar *)dmar_tbl;
+	if (!dmar)
+		return -ENODEV;
+
+	if (!dmar->width) {
+		printk (KERN_WARNING PREFIX "Zero: Invalid DMAR haw\n");
+		return -EINVAL;
+	}
+
+	printk (KERN_INFO PREFIX "Host address width %d\n",
+		dmar->width + 1);
+
+	entry_header = (struct acpi_dmar_header *)(dmar + 1);
+	while (((unsigned long)entry_header) <
+			(((unsigned long)dmar) + dmar_tbl->length)) {
+		dmar_table_print_dmar_entry(entry_header);
+
+		switch (entry_header->type) {
+		case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+			ret = dmar_parse_one_drhd(entry_header);
+			break;
+		case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+			ret = dmar_parse_one_rmrr(entry_header);
+			break;
+		default:
+			printk(KERN_WARNING PREFIX
+				"Unknown DMAR structure type\n");
+			ret = 0; /* for forward compatibility */
+			break;
+		}
+		if (ret)
+			break;
+
+		entry_header = ((void *)entry_header + entry_header->length);
+	}
+	return ret;
+}
+
+
+int __init dmar_table_init(void)
+{
+
+	parse_dmar_table();
+	if (list_empty(&dmar_drhd_units)) {
+		printk(KERN_INFO PREFIX "No DMAR devices found\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/**
+ * early_dmar_detect - checks to see if the platform supports DMAR devices
+ */
+int __init early_dmar_detect(void)
+{
+	acpi_status status = AE_OK;
+
+	/* if we could find DMAR table, then there are DMAR devices */
+	status = acpi_get_table(ACPI_SIG_DMAR, 0,
+				(struct acpi_table_header **)&dmar_tbl);
+
+	if (ACPI_SUCCESS(status) && !dmar_tbl) {
+		printk (KERN_WARNING PREFIX "Unable to map DMAR\n");
+		status = AE_NOT_FOUND;
+	}
+
+	return (ACPI_SUCCESS(status) ? 1 : 0);
+}