Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...

1 files changed, 17 insertions, 15 deletions

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 219a4106480a..138bdd6393be 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -475,7 +475,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 		 &bus->busn_res);
 
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		/*
 		 * The IO resource is allocated a range twice as large as it
@@ -489,7 +489,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
@@ -499,7 +499,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
@@ -509,7 +509,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[3];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
@@ -538,7 +538,8 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
 	struct pci_bus_region region;
 	unsigned long io_mask;
 	u8 io_base_lo, io_limit_lo;
-	u32 l, io_upper16;
+	u16 l;
+	u32 io_upper16;
 
 	io_mask = PCI_IO_RANGE_MASK;
 	if (bridge->io_window_1k)
@@ -546,13 +547,12 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
-		pci_read_config_dword(bridge, PCI_IO_BASE, &l);
-		l &= 0xffff0000;
+		pci_read_config_word(bridge, PCI_IO_BASE, &l);
 		io_base_lo = (region.start >> 8) & io_mask;
 		io_limit_lo = (region.end >> 8) & io_mask;
-		l |= ((u32) io_limit_lo << 8) | io_base_lo;
+		l = ((u16) io_limit_lo << 8) | io_base_lo;
 		/* Set up upper 16 bits of I/O base/limit. */
 		io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
@@ -564,7 +564,7 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
 	/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
 	/* Update lower 16 bits of I/O base/limit. */
-	pci_write_config_dword(bridge, PCI_IO_BASE, l);
+	pci_write_config_word(bridge, PCI_IO_BASE, l);
 	/* Update upper 16 bits of I/O base/limit. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
 }
@@ -578,7 +578,7 @@ static void pci_setup_bridge_mmio(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI Memory segment for this bus. */
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
@@ -604,7 +604,7 @@ static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
 	/* Set up PREF base/limit. */
 	bu = lu = 0;
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_PREFETCH) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
@@ -665,21 +665,23 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
 
 	pci_read_config_word(bridge, PCI_IO_BASE, &io);
 	if (!io) {
-		pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
+		pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
 		pci_read_config_word(bridge, PCI_IO_BASE, &io);
 		pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
 	}
 	if (io)
 		b_res[0].flags |= IORESOURCE_IO;
+
 	/*  DECchip 21050 pass 2 errata: the bridge may miss an address
 	    disconnect boundary by one PCI data phase.
 	    Workaround: do not use prefetching on this device. */
 	if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
 		return;
+
 	pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
 	if (!pmem) {
 		pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
-					       0xfff0fff0);
+					       0xffe0fff0);
 		pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
 		pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
 	}
@@ -1422,7 +1424,7 @@ static int iov_resources_unassigned(struct pci_dev *dev, void *data)
 		if (!r->flags)
 			continue;
 
-		pcibios_resource_to_bus(dev, &region, r);
+		pcibios_resource_to_bus(dev->bus, &region, r);
 		if (!region.start) {
 			*unassigned = true;
 			return 1; /* return early from pci_walk_bus() */