diff options
author | Ryan Desfosses <ryan@desfo.org> | 2014-04-18 20:13:50 -0400 |
---|---|---|
committer | Bjorn Helgaas <bhelgaas@google.com> | 2014-06-10 20:20:42 -0600 |
commit | 227f06470502c4fea3d93df1f12a77e3e37f6263 (patch) | |
tree | 817a80fa89d17305a47a3e4e4012d36ae6cac36c /drivers/pci | |
parent | 3c78bc61f5ef3bc87e7f94f67ec737d2273f120b (diff) |
PCI: Merge multi-line quoted strings
Merge quoted strings that are broken across lines into a single entity.
The compiler merges them anyway, but checkpatch complains about it, and
merging them makes it easier to grep for strings.
No functional change.
[bhelgaas: changelog, do the same for everything under drivers/pci]
Signed-off-by: Ryan Desfosses <ryan@desfo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Diffstat (limited to 'drivers/pci')
28 files changed, 169 insertions, 249 deletions
diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 8c148f39e8d7..d292d7cb3417 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -231,10 +231,7 @@ static int pci_vpd_pci22_wait(struct pci_dev *dev) } if (time_after(jiffies, timeout)) { - dev_printk(KERN_DEBUG, &dev->dev, - "vpd r/w failed. This is likely a firmware " - "bug on this device. Contact the card " - "vendor for a firmware update."); + dev_printk(KERN_DEBUG, &dev->dev, "vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n"); return -ETIMEDOUT; } if (fatal_signal_pending(current)) diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 8e06124aa80f..f7d3de32c9a0 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -277,9 +277,8 @@ static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, else if (size == 2) *val = (*val >> (8 * (where & 2))) & 0xffff; - dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x " - "where=0x%04x size=%d val=0x%08lx\n", bus->number, - devfn, where, size, (unsigned long)*val); + dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n", + bus->number, devfn, where, size, (unsigned long)*val); return ret; } @@ -302,9 +301,8 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, if (ret != PCIBIOS_SUCCESSFUL) return ret; - dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x " - "where=0x%04x size=%d val=0x%08lx\n", bus->number, - devfn, where, size, (unsigned long)val); + dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n", + bus->number, devfn, where, size, (unsigned long)val); if (size == 1) { shift = 8 * (where & 3); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 75e178330215..772d8766338a 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -351,11 +351,9 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data, slot->slot = NULL; bridge->nr_slots--; if (retval == -EBUSY) - pr_warn("Slot %llu already registered by another " - "hotplug driver\n", sun); + pr_warn("Slot %llu already registered by another hotplug driver\n", sun); else - pr_warn("acpiphp_register_hotplug_slot failed " - "(err code = 0x%x)\n", retval); + pr_warn("acpiphp_register_hotplug_slot failed (err code = 0x%x)\n", retval); } /* Even if the slot registration fails, we can still use it. */ } diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 868e62fc869b..4aaee746df88 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -706,8 +706,7 @@ static int ctrl_slot_setup(struct controller *ctrl, hotplug_slot_info->adapter_status = get_presence_status(ctrl, slot); - dbg("registering bus %d, dev %d, number %d, " - "ctrl->slot_device_offset %d, slot %d\n", + dbg("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n", slot->bus, slot->device, slot->number, ctrl->slot_device_offset, slot_number); @@ -837,8 +836,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) bus = pdev->subordinate; if (!bus) { - dev_notice(&pdev->dev, "the device is not a bridge, " - "skipping\n"); + dev_notice(&pdev->dev, "the device is not a bridge, skipping\n"); rc = -ENODEV; goto err_disable_device; } diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 5794057f7ec1..f7b8684a7739 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1045,8 +1045,7 @@ static int enable_slot(struct hotplug_slot *hs) rc = check_limitations(slot_cur); if (rc) { err("Adding this card exceeds the limitations of this bus.\n"); - err("(i.e., >1 133MHz cards running on same bus, or " - ">2 66 PCI cards running on same bus.\n"); + err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n"); err("Try hot-adding into another bus\n"); rc = -EINVAL; goto error_nopower; @@ -1070,12 +1069,10 @@ static int enable_slot(struct hotplug_slot *hs) !(SLOT_PWRGD(slot_cur->status))) err("power fault occurred trying to power up\n"); else if (SLOT_BUS_SPEED(slot_cur->status)) { - err("bus speed mismatch occurred. please check " - "current bus speed and card capability\n"); + err("bus speed mismatch occurred. please check current bus speed and card capability\n"); print_card_capability(slot_cur); } else if (SLOT_BUS_MODE(slot_cur->ext_status)) { - err("bus mode mismatch occurred. please check " - "current bus mode and card capability\n"); + err("bus mode mismatch occurred. please check current bus mode and card capability\n"); print_card_capability(slot_cur); } ibmphp_update_slot_info(slot_cur); @@ -1098,8 +1095,7 @@ static int enable_slot(struct hotplug_slot *hs) goto error_power; } if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) { - err("bus speed mismatch occurred. please check current bus " - "speed and card capability\n"); + err("bus speed mismatch occurred. please check current bus speed and card capability\n"); print_card_capability(slot_cur); goto error_power; } diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index f53b7c5b9a3f..2fd296706ce7 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -137,8 +137,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) "Please choose another device.\n", cur_func->device); return -ENODEV; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x is not supported for hot plugging. " - "Please choose another device.\n", cur_func->device); + err ("The device %x is not supported for hot plugging. Please choose another device.\n", + cur_func->device); return -ENODEV; } switch (hdr_type) { @@ -179,8 +179,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) case PCI_HEADER_TYPE_MULTIBRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. " - "Please insert another card.\n", cur_func->device); + err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", + cur_func->device); return -ENODEV; } assign_alt_irq (cur_func, class_code); @@ -247,8 +247,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) class >>= 8; debug ("class now is %x\n", class); if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. " - "Please insert another card.\n", cur_func->device); + err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", + cur_func->device); return -ENODEV; } @@ -1125,13 +1125,11 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno) class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ if (class == PCI_CLASS_NOT_DEFINED_VGA) { - err ("The device %x is VGA compatible and as is not supported for hot plugging. " - "Please choose another device.\n", device); + err ("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device); amount->not_correct = 1; return amount; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x is not supported for hot plugging. " - "Please choose another device.\n", device); + err ("The device %x is not supported for hot plugging. Please choose another device.\n", device); amount->not_correct = 1; return amount; } @@ -1483,12 +1481,10 @@ static int unconfigure_boot_card (struct slot *slot_cur) debug ("hdr_type %x, class %x\n", hdr_type, class); class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ if (class == PCI_CLASS_NOT_DEFINED_VGA) { - err ("The device %x function %x is VGA compatible and is not supported for hot removing. " - "Please choose another device.\n", device, function); + err ("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function); return -ENODEV; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x function %x is not supported for hot removing. " - "Please choose another device.\n", device, function); + err ("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function); return -ENODEV; } @@ -1513,9 +1509,7 @@ static int unconfigure_boot_card (struct slot *slot_cur) case PCI_HEADER_TYPE_BRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This device %x function %x is not PCI-to-PCI bridge, " - "and is not supported for hot-removing. " - "Please try another card.\n", device, function); + err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); return -ENODEV; } rc = unconfigure_boot_bridge (busno, device, function); @@ -1529,9 +1523,7 @@ static int unconfigure_boot_card (struct slot *slot_cur) case PCI_HEADER_TYPE_MULTIBRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This device %x function %x is not PCI-to-PCI bridge, " - "and is not supported for hot-removing. " - "Please try another card.\n", device, function); + err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); return -ENODEV; } rc = unconfigure_boot_bridge (busno, device, function); diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c index f62dfc40f753..f34745abd5b6 100644 --- a/drivers/pci/hotplug/ibmphp_res.c +++ b/drivers/pci/hotplug/ibmphp_res.c @@ -789,8 +789,7 @@ int ibmphp_remove_resource (struct resource_node *res) bus_cur = find_bus_wprev (res->busno, NULL, 0); if (!bus_cur) { - err ("cannot find corresponding bus of the io resource to remove " - "bailing out...\n"); + err ("cannot find corresponding bus of the io resource to remove bailing out...\n"); return -ENODEV; } diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 29caef96a21c..56d8486dc167 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -432,8 +432,7 @@ int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, if ((slot->info == NULL) || (slot->ops == NULL)) return -EINVAL; if (slot->release == NULL) { - dbg("Why are you trying to register a hotplug slot " - "without a proper release function?\n"); + dbg("Why are you trying to register a hotplug slot without a proper release function?\n"); return -EINVAL; } diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 96bb617e4de5..a2297db80813 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -266,8 +266,7 @@ static int pciehp_probe(struct pcie_device *dev) rc = init_slot(ctrl); if (rc) { if (rc == -EBUSY) - ctrl_warn(ctrl, "Slot already registered by another " - "hotplug driver\n"); + ctrl_warn(ctrl, "Slot already registered by another hotplug driver\n"); else ctrl_err(ctrl, "Slot initialization failed\n"); goto err_out_release_ctlr; diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index c57463e1d756..ff32e85e1de6 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -376,14 +376,12 @@ static void handle_button_press_event(struct slot *p_slot) pciehp_get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = BLINKINGOFF_STATE; - ctrl_info(ctrl, - "PCI slot #%s - powering off due to button " - "press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n", + slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; - ctrl_info(ctrl, - "PCI slot #%s - powering on due to button " - "press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n", + slot_name(p_slot)); } /* blink green LED and turn off amber */ pciehp_green_led_blink(p_slot); @@ -404,8 +402,8 @@ static void handle_button_press_event(struct slot *p_slot) else pciehp_green_led_off(p_slot); pciehp_set_attention_status(p_slot, 0); - ctrl_info(ctrl, "PCI slot #%s - action canceled " - "due to button press\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n", + slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 9334fc76b9d1..42914e04d110 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -174,12 +174,10 @@ static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) * event even though it supports none of power * controller, attention led, power led and EMI. */ - ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to " - "wait for command completed event.\n"); + ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to wait for command completed event\n"); ctrl->no_cmd_complete = 0; } else { - ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe " - "the controller is broken.\n"); + ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe the controller is broken\n"); } } diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index b6cb1df67097..5f871f4c4af1 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -46,9 +46,8 @@ int pciehp_configure_device(struct slot *p_slot) dev = pci_get_slot(parent, PCI_DEVFN(0, 0)); if (dev) { - ctrl_err(ctrl, "Device %s already exists " - "at %04x:%02x:00, cannot hot-add\n", pci_name(dev), - pci_domain_nr(parent), parent->number); + ctrl_err(ctrl, "Device %s already exists at %04x:%02x:00, cannot hot-add\n", + pci_name(dev), pci_domain_nr(parent), parent->number); pci_dev_put(dev); ret = -EEXIST; goto out; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 0f4c36033ade..bada20999870 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -250,15 +250,13 @@ static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot, } if (rc == PCI_L1_ERR) { - dev_dbg(&slot->pci_bus->self->dev, - "L1 failure %d with message: %s", + dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message: %s", resp.resp_sub_errno, resp.resp_l1_msg); return -EPERM; } if (rc) { - dev_dbg(&slot->pci_bus->self->dev, - "insert failed with error %d sub-error %d\n", + dev_dbg(&slot->pci_bus->self->dev, "insert failed with error %d sub-error %d\n", rc, resp.resp_sub_errno); return -EIO; } @@ -288,21 +286,18 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, } if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) { - dev_dbg(&slot->pci_bus->self->dev, - "Cannot remove last 33MHz card\n"); + dev_dbg(&slot->pci_bus->self->dev, "Cannot remove last 33MHz card\n"); return -EPERM; } if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) { - dev_dbg(&slot->pci_bus->self->dev, - "L1 failure %d with message \n%s\n", + dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message \n%s\n", resp.resp_sub_errno, resp.resp_l1_msg); return -EPERM; } if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) { - dev_dbg(&slot->pci_bus->self->dev, - "remove failed with error %d sub-error %d\n", + dev_dbg(&slot->pci_bus->self->dev, "remove failed with error %d sub-error %d\n", rc, resp.resp_sub_errno); return -EIO; } @@ -417,8 +412,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion); if (acpi_bus_get_device(phandle, &pdevice)) { - dev_dbg(&slot->pci_bus->self->dev, - "no parent device, assuming NULL\n"); + dev_dbg(&slot->pci_bus->self->dev, "no parent device, assuming NULL\n"); pdevice = NULL; } @@ -447,10 +441,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) ret = acpi_bus_scan(chandle); if (ACPI_FAILURE(ret)) { - printk(KERN_ERR "%s: acpi_bus_scan " - "failed (0x%x) for slot %d " - "func %d\n", __func__, - ret, (int)(adr>>16), + printk(KERN_ERR "%s: acpi_bus_scan failed (0x%x) for slot %d func %d\n", + __func__, ret, (int)(adr>>16), (int)(adr&0xffff)); /* try to continue on */ } @@ -471,11 +463,9 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) mutex_unlock(&sn_hotplug_mutex); if (rc == 0) - dev_dbg(&slot->pci_bus->self->dev, - "insert operation successful\n"); + dev_dbg(&slot->pci_bus->self->dev, "insert operation successful\n"); else - dev_dbg(&slot->pci_bus->self->dev, - "insert operation failed rc = %d\n", rc); + dev_dbg(&slot->pci_bus->self->dev, "insert operation failed rc = %d\n", rc); return rc; } @@ -561,8 +551,7 @@ static int disable_slot(struct hotplug_slot *bss_hotplug_slot) acpi_status ret; ret = acpi_unload_table_id(ssdt_id); if (ACPI_FAILURE(ret)) { - printk(KERN_ERR "%s: acpi_unload_table_id " - "failed (0x%x) for id %d\n", + printk(KERN_ERR "%s: acpi_unload_table_id failed (0x%x) for id %d\n", __func__, ret, ssdt_id); /* try to continue on */ } diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index faf13abd5b99..294ef4b10cf1 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -143,8 +143,7 @@ static int init_slots(struct controller *ctrl) snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; - ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x " - "hp_slot=%x sun=%x slot_device_offset=%x\n", + ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x hp_slot=%x sun=%x slot_device_offset=%x\n", pci_domain_nr(ctrl->pci_dev->subordinate), slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 90cd75c1a3a7..e57972366c91 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -196,8 +196,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, ctrl_dbg(ctrl, "Change speed to %d\n", speed); if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { - ctrl_err(ctrl, "%s: Issue of set bus speed mode command " - "failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n", + __func__); return WRONG_BUS_FREQUENCY; } return rc; @@ -215,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, */ if (flag) { if (asp < bsp) { - ctrl_err(ctrl, "Speed of bus %x and adapter %x " - "mismatch\n", bsp, asp); + ctrl_err(ctrl, "Speed of bus %x and adapter %x mismatch\n", + bsp, asp); rc = WRONG_BUS_FREQUENCY; } return rc; @@ -250,8 +250,7 @@ static int board_added(struct slot *p_slot) hp_slot = p_slot->device - ctrl->slot_device_offset; - ctrl_dbg(ctrl, - "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", + ctrl_dbg(ctrl, "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", __func__, p_slot->device, ctrl->slot_device_offset, hp_slot); /* Power on slot without connecting to bus */ @@ -263,8 +262,8 @@ static int board_added(struct slot *p_slot) if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) { if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { - ctrl_err(ctrl, "%s: Issue of set bus speed mode command" - " failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n", + __func__); return WRONG_BUS_FREQUENCY; } @@ -277,8 +276,7 @@ static int board_added(struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); if (rc) { - ctrl_err(ctrl, "Can't get adapter speed or " - "bus mode mismatch\n"); + ctrl_err(ctrl, "Can't get adapter speed or bus mode mismatch\n"); return WRONG_BUS_FREQUENCY; } @@ -289,8 +287,8 @@ static int board_added(struct slot *p_slot) if (!list_empty(&ctrl->pci_dev->subordinate->devices)) slots_not_empty = 1; - ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d," - " max_bus_speed %d\n", __func__, slots_not_empty, asp, + ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, max_bus_speed %d\n", + __func__, slots_not_empty, asp, bsp, msp); rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); @@ -490,12 +488,12 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = BLINKINGOFF_STATE; - ctrl_info(ctrl, "PCI slot #%s - powering off due to " - "button press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n", + slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; - ctrl_info(ctrl, "PCI slot #%s - powering on due to " - "button press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n", + slot_name(p_slot)); } /* blink green LED and turn off amber */ p_slot->hpc_ops->green_led_blink(p_slot); @@ -518,8 +516,8 @@ static void handle_button_press_event(struct slot *p_slot) else p_slot->hpc_ops->green_led_off(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); - ctrl_info(ctrl, "PCI slot #%s - action canceled due to " - "button press\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n", + slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 12aa9e2b78aa..29e22352822c 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -341,8 +341,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) cmd_status = hpc_check_cmd_status(slot->ctrl); if (cmd_status) { - ctrl_err(ctrl, - "Failed to issued command 0x%x (error code = %d)\n", + ctrl_err(ctrl, "Failed to issued command 0x%x (error code = %d)\n", cmd, cmd_status); retval = -EIO; } @@ -974,8 +973,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) for (i = 0; i < 9 + num_slots; i++) { rc = shpc_indirect_read(ctrl, i, &tempdword); if (rc) { - ctrl_err(ctrl, - "Cannot read creg (index = %d)\n", i); + ctrl_err(ctrl, "Cannot read creg (index = %d)\n", + i); goto abort; } ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword); @@ -1060,10 +1059,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) /* Installs the interrupt handler */ rc = pci_enable_msi(pdev); if (rc) { - ctrl_info(ctrl, - "Can't get msi for the hotplug controller\n"); - ctrl_info(ctrl, - "Use INTx for the hotplug controller\n"); + ctrl_info(ctrl, "Can't get msi for the hotplug controller\n"); + ctrl_info(ctrl, "Use INTx for the hotplug controller\n"); } rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, @@ -1071,8 +1068,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) ctrl_dbg(ctrl, "request_irq %d (returns %d)\n", ctrl->pci_dev->irq, rc); if (rc) { - ctrl_err(ctrl, "Can't get irq %d for the hotplug " - "controller\n", ctrl->pci_dev->irq); + ctrl_err(ctrl, "Can't get irq %d for the hotplug controller\n", + ctrl->pci_dev->irq); goto abort_iounmap; } } diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 9202d133485c..469454e0cc48 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -46,9 +46,9 @@ int shpchp_configure_device(struct slot *p_slot) dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); if (dev) { - ctrl_err(ctrl, "Device %s already exists " - "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev), - pci_domain_nr(parent), p_slot->bus, p_slot->device); + ctrl_err(ctrl, "Device %s already exists at %04x:%02x:%02x, cannot hot-add\n", + pci_name(dev), pci_domain_nr(parent), + p_slot->bus, p_slot->device); pci_dev_put(dev); ret = -EINVAL; goto out; diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 27a7e67ddfe4..5a68b485e547 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -980,8 +980,7 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) /* Check whether driver already requested for MSI irq */ if (dev->msi_enabled) { - dev_info(&dev->dev, "can't enable MSI-X " - "(MSI IRQ already assigned)\n"); + dev_info(&dev->dev, "can't enable MSI-X (MSI IRQ already assigned)\n"); return -EINVAL; } status = msix_capability_init(dev, entries, nvec); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 41d8d0307347..9ff0a901ecf7 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -286,8 +286,8 @@ static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr, !!val) { pdev->subordinate->bus_flags ^= PCI_BUS_FLAGS_NO_MSI; - dev_warn(&pdev->dev, "forced subordinate bus to%s support MSI," - " bad things could happen\n", val ? "" : " not"); + dev_warn(&pdev->dev, "forced subordinate bus to%s support MSI, bad things could happen\n", + val ? "" : " not"); } return count; @@ -945,8 +945,7 @@ legacy_io_err: kfree(b->legacy_io); b->legacy_io = NULL; kzalloc_err: - printk(KERN_WARNING "pci: warning: could not create legacy I/O port " - "and ISA memory resources to sysfs\n"); + printk(KERN_WARNING "pci: warning: could not create legacy I/O port and ISA memory resources to sysfs\n"); return; } @@ -1006,8 +1005,7 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, return -ENODEV; if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) { - WARN(1, "process \"%s\" tried to map 0x%08lx bytes " - "at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n", + WARN(1, "process \"%s\" tried to map 0x%08lx bytes at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n", current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff, pci_name(pdev), i, (u64)pci_resource_start(pdev, i), diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 952b4b489d0f..0a271a100986 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -555,8 +555,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) */ if (state != PCI_D0 && dev->current_state <= PCI_D3cold && dev->current_state > state) { - dev_err(&dev->dev, "invalid power transition " - "(from state %d to %d)\n", dev->current_state, state); + dev_err(&dev->dev, "invalid power transition (from state %d to %d)\n", + dev->current_state, state); return -EINVAL; } @@ -603,8 +603,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); if (dev->current_state != state && printk_ratelimit()) - dev_info(&dev->dev, "Refused to change power state, " - "currently in D%d\n", dev->current_state); + dev_info(&dev->dev, "Refused to change power state, currently in D%d\n", + dev->current_state); /* * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT @@ -1029,8 +1029,8 @@ static void pci_restore_config_dword(struct pci_dev *pdev, int offset, return; for (;;) { - dev_dbg(&pdev->dev, "restoring config space at offset " - "%#x (was %#x, writing %#x)\n", offset, val, saved_val); + dev_dbg(&pdev->dev, "restoring config space at offset %#x (was %#x, writing %#x)\n", + offset, val, saved_val); pci_write_config_dword(pdev, offset, saved_val); if (retry-- <= 0) return; @@ -2815,8 +2815,8 @@ int pci_set_cacheline_size(struct pci_dev *dev) if (cacheline_size == pci_cache_line_size) return 0; - dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not " - "supported\n", pci_cache_line_size << 2); + dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not supported\n", + pci_cache_line_size << 2); return -EINVAL; } @@ -2952,8 +2952,8 @@ bool pci_intx_mask_supported(struct pci_dev *dev) * go ahead and check it. */ if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { - dev_err(&dev->dev, "Command register changed from " - "0x%x to 0x%x: driver or hardware bug?\n", orig, new); + dev_err(&dev->dev, "Command register changed from 0x%x to 0x%x: driver or hardware bug?\n", + orig, new); } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) { mask_supported = true; pci_write_config_word(dev, PCI_COMMAND, orig); @@ -3138,8 +3138,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe) if (pci_wait_for_pending(dev, PCI_AF_STATUS, PCI_AF_STATUS_TP)) goto clear; - dev_err(&dev->dev, "transaction is not cleared; " - "proceeding with reset anyway\n"); + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); clear: pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index d82cb8fd452e..182224acedbe 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -397,16 +397,14 @@ static int aer_inject(struct aer_error_inj *einj) if (!aer_mask_override && einj->cor_status && !(einj->cor_status & ~cor_mask)) { ret = -EINVAL; - printk(KERN_WARNING "The correctable error(s) is masked " - "by device\n"); + printk(KERN_WARNING "The correctable error(s) is masked by device\n"); spin_unlock_irqrestore(&inject_lock, flags); goto out_put; } if (!aer_mask_override && einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) { ret = -EINVAL; - printk(KERN_WARNING "The uncorrectable error(s) is masked " - "by device\n"); + printk(KERN_WARNING "The uncorrectable error(s) is masked by device\n"); spin_unlock_irqrestore(&inject_lock, flags); goto out_put; } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 34ff7026440c..36ed31b52198 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -172,9 +172,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) int id = ((dev->bus->number << 8) | dev->devfn); if (!info->status) { - dev_err(&dev->dev, - "PCIe Bus Error: severity=%s, type=Unaccessible, " - "id=%04x(Unregistered Agent ID)\n", + dev_err(&dev->dev, "PCIe Bus Error: severity=%s, type=Unaccessible, id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); goto out; } @@ -182,13 +180,11 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) layer = AER_GET_LAYER_ERROR(info->severity, info->status); agent = AER_GET_AGENT(info->severity, info->status); - dev_err(&dev->dev, - "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + dev_err(&dev->dev, "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); - dev_err(&dev->dev, - " device [%04x:%04x] error status/mask=%08x/%08x\n", + dev_err(&dev->dev, " device [%04x:%04x] error status/mask=%08x/%08x\n", dev->vendor, dev->device, info->status, info->mask); diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index bbc3bdd2b189..82e06a86cd77 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -199,8 +199,7 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) * assuming that the PME was reported by a PCIe-PCI bridge that * used devfn different from zero. */ - dev_dbg(&port->dev, "PME interrupt generated for " - "non-existent device %02x:%02x.%d\n", + dev_dbg(&port->dev, "PME interrupt generated for non-existent device %02x:%02x.%d\n", busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); found = pcie_pme_from_pci_bridge(bus, 0); } diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 0d8fdc48e642..80887eaa0668 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -204,8 +204,8 @@ static int pcie_portdrv_probe(struct pci_dev *dev, return -ENODEV; if (!dev->irq && dev->pin) { - dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " - "check vendor BIOS\n", dev->vendor, dev->device); + dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; check vendor BIOS\n", + dev->vendor, dev->device); } status = pcie_port_device_register(dev); if (status) @@ -397,7 +397,7 @@ static struct pci_driver pcie_portdriver = { static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) { pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", - d->ident); + d->ident); pcie_pme_disable_msi(); return 0; } diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 468a6505bef1..e3cf8a2e6292 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -433,8 +433,7 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child) limit |= ((unsigned long) mem_limit_hi) << 32; #else if (mem_base_hi || mem_limit_hi) { - dev_err(&dev->dev, "can't handle 64-bit " - "address space for bridge\n"); + dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n"); return; } #endif @@ -933,8 +932,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) (child->number > bus->busn_res.end) || (child->number < bus->number) || (child->busn_res.end < bus->number)) { - dev_info(&child->dev, "%pR %s " - "hidden behind%s bridge %s %pR\n", + dev_info(&child->dev, "%pR %s hidden behind%s bridge %s %pR\n", &child->busn_res, (bus->number > child->busn_res.end && bus->busn_res.end < child->number) ? @@ -1224,13 +1222,13 @@ int pci_setup_device(struct pci_dev *dev) break; default: /* unknown header */ - dev_err(&dev->dev, "unknown header type %02x, " - "ignoring device\n", dev->hdr_type); + dev_err(&dev->dev, "unknown header type %02x, ignoring device\n", + dev->hdr_type); return -EIO; bad: - dev_err(&dev->dev, "ignoring class %#08x (doesn't match header " - "type %02x)\n", dev->class, dev->hdr_type); + dev_err(&dev->dev, "ignoring class %#08x (doesn't match header type %02x)\n", + dev->class, dev->hdr_type); dev->class = PCI_CLASS_NOT_DEFINED; } @@ -1305,10 +1303,9 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, return false; /* Card hasn't responded in 60 seconds? Must be stuck. */ if (delay > crs_timeout) { - printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not " - "responding\n", pci_domain_nr(bus), - bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn)); + printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not responding\n", + pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn)); return false; } } @@ -1613,9 +1610,7 @@ static void pcie_write_mrrs(struct pci_dev *dev) } if (mrrs < 128) - dev_err(&dev->dev, "MRRS was unable to be configured with a " - "safe value. If problems are experienced, try running " - "with pci=pcie_bus_safe.\n"); + dev_err(&dev->dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n"); } static void pcie_bus_detect_mps(struct pci_dev *dev) @@ -1652,8 +1647,8 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data) pcie_write_mps(dev, mps); pcie_write_mrrs(dev); - dev_info(&dev->dev, "Max Payload Size set to %4d/%4d (was %4d), " - "Max Read Rq %4d\n", pcie_get_mps(dev), 128 << dev->pcie_mpss, + dev_info(&dev->dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n", + pcie_get_mps(dev), 128 << dev->pcie_mpss, orig_mps, pcie_get_readrq(dev)); return 0; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e0d78d23483a..f01c50d9f6d7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -315,8 +315,7 @@ static void quirk_cs5536_vsa(struct pci_dev *dev) if (pci_resource_len(dev, 0) != 8) { struct resource *res = &dev->resource[0]; res->end = res->start + 8 - 1; - dev_info(&dev->dev, "CS5536 ISA bridge bug detected " - "(incorrect header); workaround applied.\n"); + dev_info(&dev->dev, "CS5536 ISA bridge bug detected (incorrect header); workaround applied\n"); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); @@ -400,7 +399,8 @@ static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int p * let's get enough confirmation reports first. */ base &= -size; - dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); + dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, + base + size - 1); } static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) @@ -425,7 +425,8 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int * reserve it, but let's get enough confirmation reports first. */ base &= -size; - dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); + dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, + base + size - 1); } /* @@ -668,8 +669,7 @@ static void quirk_xio2000a(struct pci_dev *dev) struct pci_dev *pdev; u16 command; - dev_warn(&dev->dev, "TI XIO2000a quirk detected; " - "secondary bus fast back-to-back transfers disabled\n"); + dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { pci_read_config_word(pdev, PCI_COMMAND, &command); if (command & PCI_COMMAND_FAST_BACK) @@ -761,8 +761,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); static void quirk_amd_8131_mmrbc(struct pci_dev *dev) { if (dev->subordinate && dev->revision <= 0x12) { - dev_info(&dev->dev, "AMD8131 rev %x detected; " - "disabling PCI-X MMRBC\n", dev->revision); + dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", + dev->revision); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; } } @@ -971,7 +971,8 @@ static void quirk_mediagx_master(struct pci_dev *dev) pci_read_config_byte(dev, 0x41, ®); if (reg & 2) { reg &= ~2; - dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); + dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", + reg); pci_write_config_byte(dev, 0x41, reg); } } @@ -1262,7 +1263,8 @@ static void asus_hides_smbus_lpc(struct pci_dev *dev) pci_write_config_word(dev, 0xF2, val & (~0x8)); pci_read_config_word(dev, 0xF2, &val); if (val & 0x8) - dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); + dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", + val); else dev_info(&dev->dev, "Enabled i801 SMBus device\n"); } @@ -1410,7 +1412,8 @@ static void asus_hides_ac97_lpc(struct pci_dev *dev) pci_write_config_byte(dev, 0x50, val & (~0xc0)); pci_read_config_byte(dev, 0x50, &val); if (val & 0xc0) - dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val); + dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", + val); else dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); } @@ -1720,8 +1723,8 @@ static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); if (!pci_config_word) { - dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] " - "already disabled\n", dev->vendor, dev->device); + dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", + dev->vendor, dev->device); return; } pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); @@ -1769,8 +1772,7 @@ static void quirk_plx_pci9050(struct pci_dev *dev) if (pci_resource_len(dev, bar) == 0x80 && (pci_resource_start(dev, bar) & 0x80)) { struct resource *r = &dev->resource[bar]; - dev_info(&dev->dev, - "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", + dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", bar); r->flags |= IORESOURCE_UNSET; r->start = 0; @@ -1817,9 +1819,7 @@ static void quirk_netmos(struct pci_dev *dev) case PCI_DEVICE_ID_NETMOS_9845: case PCI_DEVICE_ID_NETMOS_9855: if (num_parallel) { - dev_info(&dev->dev, "Netmos %04x (%u parallel, " - "%u serial); changing class SERIAL to OTHER " - "(use parport_serial)\n", + dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", dev->device, num_parallel, num_serial); dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | (dev->class & 0xff); @@ -1886,8 +1886,7 @@ static void quirk_e100_interrupt(struct pci_dev *dev) cmd_hi = readb(csr + 3); if (cmd_hi == 0) { - dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; " - "disabling\n"); + dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); writeb(1, csr + 3); } @@ -1957,8 +1956,7 @@ static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) if (pci_read_config_byte(dev, 0xf41, &b) == 0) { if (!(b & 0x20)) { pci_write_config_byte(dev, 0xf41, b | 0x20); - dev_info(&dev->dev, - "Linking AER extended capability\n"); + dev_info(&dev->dev, "Linking AER extended capability\n"); } } } @@ -1996,8 +1994,7 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) /* Turn off PCI Bus Parking */ pci_write_config_byte(dev, 0x76, b ^ 0x40); - dev_info(&dev->dev, - "Disabling VIA CX700 PCI parking\n"); + dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); } } @@ -2012,8 +2009,7 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) /* Disable "Read FIFO Timer" */ pci_write_config_byte(dev, 0x77, 0x0); - dev_info(&dev->dev, - "Disabling VIA CX700 PCI caching\n"); + dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); } } } @@ -2148,8 +2144,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disab static void quirk_disable_msi(struct pci_dev *dev) { if (dev->subordinate) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } } @@ -2205,8 +2200,7 @@ static int msi_ht_cap_enabled(struct pci_dev *dev) static void quirk_msi_ht_cap(struct pci_dev *dev) { if (dev->subordinate && !msi_ht_cap_enabled(dev)) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } } @@ -2230,8 +2224,7 @@ static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) if (!pdev) return; if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } pci_dev_put(pdev); @@ -2277,8 +2270,7 @@ static void nvenet_msi_disable(struct pci_dev *dev) if (board_name && (strstr(board_name, "P5N32-SLI PREMIUM") || strstr(board_name, "P5N32-E SLI"))) { - dev_info(&dev->dev, - "Disabling msi for MCP55 NIC on P5N32-SLI\n"); + dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); dev->no_msi = 1; } } @@ -2487,8 +2479,7 @@ static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) */ host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); if (host_bridge == NULL) { - dev_warn(&dev->dev, - "nv_msi_ht_cap_quirk didn't locate host bridge\n"); + dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); return; } @@ -2815,8 +2806,7 @@ static void quirk_intel_mc_errata(struct pci_dev *dev) */ err = pci_read_config_word(dev, 0x48, &rcc); if (err) { - dev_err(&dev->dev, "Error attempting to read the read " - "completion coalescing register.\n"); + dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); return; } @@ -2827,13 +2817,11 @@ static void quirk_intel_mc_errata(struct pci_dev *dev) err = pci_write_config_word(dev, 0x48, rcc); if (err) { - dev_err(&dev->dev, "Error attempting to write the read " - "completion coalescing register.\n"); + dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); return; } - pr_info_once("Read completion coalescing disabled due to hardware " - "errata relating to 256B MPS.\n"); + pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); } /* Intel 5000 series memory controllers and ports 2-7 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); @@ -2942,8 +2930,7 @@ static void disable_igfx_irq(struct pci_dev *dev) /* Check if any interrupt line is still enabled */ if (readl(regs + I915_DEIER_REG) != 0) { - dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; " - "disabling\n"); + dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); writel(0, regs + I915_DEIER_REG); } @@ -3110,8 +3097,8 @@ static int __init pci_apply_final_quirks(void) if (!tmp || cls == tmp) continue; - printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), " - "using %u bytes\n", cls << 2, tmp << 2, + printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", + cls << 2, tmp << 2, pci_dfl_cache_line_size << 2); pci_cache_line_size = pci_dfl_cache_line_size; } diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 2f053922dd5c..a5a63ecfb628 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -148,8 +148,7 @@ static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head) tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); if (!tmp) - panic("pdev_sort_resources(): " - "kmalloc() failed!\n"); + panic("pdev_sort_resources(): kmalloc() failed!\n"); tmp->res = r; tmp->dev = dev; @@ -859,9 +858,8 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, resource_size(b_res), min_align); if (!size0 && !size1) { if (b_res->start || b_res->end) - dev_info(&bus->self->dev, "disabling bridge window " - "%pR to %pR (unused)\n", b_res, - &bus->busn_res); + dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n", + b_res, &bus->busn_res); b_res->flags = 0; return; } @@ -872,10 +870,9 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size, if (size1 > size0 && realloc_head) { add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align); - dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window " - "%pR to %pR add_size %llx\n", b_res, - &bus->busn_res, - (unsigned long long)size1-size0); + dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n", + b_res, &bus->busn_res, + (unsigned long long)size1-size0); } } @@ -974,9 +971,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, if (order < 0) order = 0; if (order >= ARRAY_SIZE(aligns)) { - dev_warn(&dev->dev, "disabling BAR %d: %pR " - "(bad alignment %#llx)\n", i, r, - (unsigned long long) align); + dev_warn(&dev->dev, "disabling BAR %d: %pR (bad alignment %#llx)\n", + i, r, (unsigned long long) align); r->flags = 0; continue; } @@ -1003,9 +999,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, resource_size(b_res), min_align); if (!size0 && !size1) { if (b_res->start || b_res->end) - dev_info(&bus->self->dev, "disabling bridge window " - "%pR to %pR (unused)\n", b_res, - &bus->busn_res); + dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n", + b_res, &bus->busn_res); b_res->flags = 0; return 0; } @@ -1014,9 +1009,9 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, b_res->flags |= IORESOURCE_STARTALIGN; if (size1 > size0 && realloc_head) { add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align); - dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window " - "%pR to %pR add_size %llx\n", b_res, - &bus->busn_res, (unsigned long long)size1-size0); + dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n", + b_res, &bus->busn_res, + (unsigned long long)size1-size0); } return 0; } @@ -1274,8 +1269,8 @@ void __pci_bus_assign_resources(const struct pci_bus *bus, break; default: - dev_info(&dev->dev, "not setting up bridge for bus " - "%04x:%02x\n", pci_domain_nr(b), b->number); + dev_info(&dev->dev, "not setting up bridge for bus %04x:%02x\n", + pci_domain_nr(b), b->number); break; } } @@ -1312,8 +1307,8 @@ static void __pci_bridge_assign_resources(const struct pci_dev *bridge, break; default: - dev_info(&bridge->dev, "not setting up bridge for bus " - "%04x:%02x\n", pci_domain_nr(b), b->number); + dev_info(&bridge->dev, "not setting up bridge for bus %04x:%02x\n", + pci_domain_nr(b), b->number); break; } } diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 211b36f96ff3..caed1ce6facd 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -96,8 +96,8 @@ void pci_update_resource(struct pci_dev *dev, int resno) pci_write_config_dword(dev, reg + 4, new); pci_read_config_dword(dev, reg + 4, &check); if (check != new) { - dev_err(&dev->dev, "BAR %d: error updating " - "(high %#08x != %#08x)\n", resno, new, check); + dev_err(&dev->dev, "BAR %d: error updating (high %#08x != %#08x)\n", + resno, new, check); } } @@ -289,8 +289,8 @@ int pci_assign_resource(struct pci_dev *dev, int resno) res->flags |= IORESOURCE_UNSET; align = pci_resource_alignment(dev, res); if (!align) { - dev_info(&dev->dev, "BAR %d: can't assign %pR " - "(bogus alignment)\n", resno, res); + dev_info(&dev->dev, "BAR %d: can't assign %pR (bogus alignment)\n", + resno, res); return -EINVAL; } @@ -325,8 +325,8 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz res->flags |= IORESOURCE_UNSET; if (!res->parent) { - dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resource %pR " - "\n", resno, res); + dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resource %pR\n", + resno, res); return -EINVAL; } |