Merge tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This round contains a couple of new drivers for the Marvell Berlin
  family of SoCs, various SoCs from Renesas and Broadcom as well as the
  backlight PWM present on MediaTek SoCs.

  Further existing drivers are extended to support a wider range of
  hardware.

  The remaining patches are minor fixes and cleanups across the board.

  Note that one of the patches included in this pull request is against
  arch/unicore32.  I've included it here because I couldn't get a
  response from Guan Xuetao and I consider the change low-risk.
  Equivalent patches have been merged and tested in Samsung and PXA
  trees.  The goal is to finally get rid of legacy code paths that have
  repeatedly been causing headaches"

* tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: sunxi: Fix whitespace issue
  pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro's
  pwm: sysfs: Remove unnecessary temporary variable
  unicore32: nb0916: Use PWM lookup table
  pwm: pwm-rcar: Revise the device tree binding document about compatible
  pwm: Return -ENODEV if no PWM lookup match is found
  pwm: sun4i: Add support for PWM controller on sun5i SoCs
  pwm: Set enable state properly on failed call to enable
  pwm: lpss: Add support for runtime PM
  pwm: lpss: Add more Intel Broxton IDs
  pwm: lpss: Support all four PWMs on Intel Broxton
  pwm: lpss: Add support for multiple PWMs
  pwm-pca9685: enable ACPI device found on Galileo Gen2
  pwm: Add MediaTek display PWM driver support
  dt-bindings: pwm: Add MediaTek display PWM bindings
  pwm: tipwmss: Enable on TI DRA7x and AM437x
  pwm: atmel-hlcdc: add sama5d2 SoC support.
  pwm: Add Broadcom BCM7038 PWM controller support
  Documentation: dt: add Broadcom BCM7038 PWM controller binding
  pwm: Add support for R-Car PWM Timer
  ...

1 files changed, 16 insertions, 4 deletions

diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 70448a6079b0..117fccf7934a 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -19,9 +19,11 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -297,7 +299,6 @@ static const struct regmap_config pca9685_regmap_i2c_config = {
 static int pca9685_pwm_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
-	struct device_node *np = client->dev.of_node;
 	struct pca9685 *pca;
 	int ret;
 	int mode2;
@@ -320,12 +321,12 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 
 	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
 
-	if (of_property_read_bool(np, "invert"))
+	if (device_property_read_bool(&client->dev, "invert"))
 		mode2 |= MODE2_INVRT;
 	else
 		mode2 &= ~MODE2_INVRT;
 
-	if (of_property_read_bool(np, "open-drain"))
+	if (device_property_read_bool(&client->dev, "open-drain"))
 		mode2 &= ~MODE2_OUTDRV;
 	else
 		mode2 |= MODE2_OUTDRV;
@@ -363,16 +364,27 @@ static const struct i2c_device_id pca9685_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca9685_id);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id pca9685_acpi_ids[] = {
+	{ "INT3492", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
+#endif
+
+#ifdef CONFIG_OF
 static const struct of_device_id pca9685_dt_ids[] = {
 	{ .compatible = "nxp,pca9685-pwm", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
+#endif
 
 static struct i2c_driver pca9685_i2c_driver = {
 	.driver = {
 		.name = "pca9685-pwm",
-		.of_match_table = pca9685_dt_ids,
+		.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
+		.of_match_table = of_match_ptr(pca9685_dt_ids),
 	},
 	.probe = pca9685_pwm_probe,
 	.remove = pca9685_pwm_remove,