Merge tag 'v5.4.80' into 5.4-2.3.x-imx

This is the 5.4.80 stable release

Conflicts (manual resolve):
- arch/arm64/boot/dts/freescale/imx8mn.dtsi:
Fix minor merge conflict where commit [8381af1b684c] in stable tree
removed one blank line.

- drivers/net/can/flexcan.c:
Fix merge fuzz during integration of stable commit [4c0a778fcf7b5].

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>

3 files changed, 41 insertions, 22 deletions

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 0c647c9d8777..5f10f99d6ba4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1275,7 +1275,6 @@ static int _regulator_do_enable(struct regulator_dev *rdev);
 /**
  * set_machine_constraints - sets regulator constraints
  * @rdev: regulator source
- * @constraints: constraints to apply
  *
  * Allows platform initialisation code to define and constrain
  * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
@@ -1283,21 +1282,11 @@ static int _regulator_do_enable(struct regulator_dev *rdev);
  * regulator operations to proceed i.e. set_voltage, set_current_limit,
  * set_mode.
  */
-static int set_machine_constraints(struct regulator_dev *rdev,
-	const struct regulation_constraints *constraints)
+static int set_machine_constraints(struct regulator_dev *rdev)
 {
 	int ret = 0;
 	const struct regulator_ops *ops = rdev->desc->ops;
 
-	if (constraints)
-		rdev->constraints = kmemdup(constraints, sizeof(*constraints),
-					    GFP_KERNEL);
-	else
-		rdev->constraints = kzalloc(sizeof(*constraints),
-					    GFP_KERNEL);
-	if (!rdev->constraints)
-		return -ENOMEM;
-
 	ret = machine_constraints_voltage(rdev, rdev->constraints);
 	if (ret != 0)
 		return ret;
@@ -1811,6 +1800,15 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	if (r == rdev) {
+		dev_err(dev, "Supply for %s (%s) resolved to itself\n",
+			rdev->desc->name, rdev->supply_name);
+		if (!have_full_constraints())
+			return -EINVAL;
+		r = dummy_regulator_rdev;
+		get_device(&r->dev);
+	}
+
 	/*
 	 * If the supply's parent device is not the same as the
 	 * regulator's parent device, then ensure the parent device
@@ -5025,7 +5023,6 @@ struct regulator_dev *
 regulator_register(const struct regulator_desc *regulator_desc,
 		   const struct regulator_config *cfg)
 {
-	const struct regulation_constraints *constraints = NULL;
 	const struct regulator_init_data *init_data;
 	struct regulator_config *config = NULL;
 	static atomic_t regulator_no = ATOMIC_INIT(-1);
@@ -5164,14 +5161,23 @@ regulator_register(const struct regulator_desc *regulator_desc,
 
 	/* set regulator constraints */
 	if (init_data)
-		constraints = &init_data->constraints;
+		rdev->constraints = kmemdup(&init_data->constraints,
+					    sizeof(*rdev->constraints),
+					    GFP_KERNEL);
+	else
+		rdev->constraints = kzalloc(sizeof(*rdev->constraints),
+					    GFP_KERNEL);
+	if (!rdev->constraints) {
+		ret = -ENOMEM;
+		goto wash;
+	}
 
 	if (init_data && init_data->supply_regulator)
 		rdev->supply_name = init_data->supply_regulator;
 	else if (regulator_desc->supply_name)
 		rdev->supply_name = regulator_desc->supply_name;
 
-	ret = set_machine_constraints(rdev, constraints);
+	ret = set_machine_constraints(rdev);
 	if (ret == -EPROBE_DEFER) {
 		/* Regulator might be in bypass mode and so needs its supply
 		 * to set the constraints */
@@ -5180,7 +5186,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		 * that is just being created */
 		ret = regulator_resolve_supply(rdev);
 		if (!ret)
-			ret = set_machine_constraints(rdev, constraints);
+			ret = set_machine_constraints(rdev);
 		else
 			rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
 				 ERR_PTR(ret));
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 0398b57692e9..f75b64e41faa 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -844,11 +844,14 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		 * the switched regulator till yet.
 		 */
 		if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
-			if (pfuze_chip->regulator_descs[i].sw_reg) {
-				desc->ops = &pfuze100_sw_disable_regulator_ops;
-				desc->enable_val = 0x8;
-				desc->disable_val = 0x0;
-				desc->enable_time = 500;
+			if (pfuze_chip->chip_id == PFUZE100 ||
+				pfuze_chip->chip_id == PFUZE200) {
+				if (pfuze_chip->regulator_descs[i].sw_reg) {
+					desc->ops = &pfuze100_sw_disable_regulator_ops;
+					desc->enable_val = 0x8;
+					desc->disable_val = 0x0;
+					desc->enable_time = 500;
+				}
 			}
 		}
 
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index 89b9314d64c9..016330f909c0 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -342,8 +342,17 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
 		return ret;
 	}
 
-	/* If data is exactly the same, then just update index, no change */
 	info = &abb->info[sel];
+	/*
+	 * When Linux kernel is starting up, we are'nt sure of the
+	 * Bias configuration that bootloader has configured.
+	 * So, we get to know the actual setting the first time
+	 * we are asked to transition.
+	 */
+	if (abb->current_info_idx == -EINVAL)
+		goto just_set_abb;
+
+	/* If data is exactly the same, then just update index, no change */
 	oinfo = &abb->info[abb->current_info_idx];
 	if (!memcmp(info, oinfo, sizeof(*info))) {
 		dev_dbg(dev, "%s: Same data new idx=%d, old idx=%d\n", __func__,
@@ -351,6 +360,7 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
 		goto out;
 	}
 
+just_set_abb:
 	ret = ti_abb_set_opp(rdev, abb, info);
 
 out: