rtc: make rtc-omap driver ioremap its register space

The rtc-omap driver currently assumes that the rtc's registers are at a
fixed address and already mapped into virtual memory space.  Remove those
assumptions so the same driver can be used for similar devices that reside
at different physical addresses (e.g., TI's DA8xx/OMAP-L13x SoC's).

Also allow the possibility for the timer and alarm interrupts to use the
same IRQ.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 26 insertions, 21 deletions

diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 0587d53987fe..64d9727b7229 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -87,9 +87,10 @@
 #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
 #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
 
+static void __iomem	*rtc_base;
 
-#define rtc_read(addr)		omap_readb(OMAP_RTC_BASE + (addr))
-#define rtc_write(val, addr)	omap_writeb(val, OMAP_RTC_BASE + (addr))
+#define rtc_read(addr)		__raw_readb(rtc_base + (addr))
+#define rtc_write(val, addr)	__raw_writeb(val, rtc_base + (addr))
 
 
 /* we rely on the rtc framework to handle locking (rtc->ops_lock),
@@ -330,32 +331,31 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	/* NOTE:  using static mapping for RTC registers */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res && res->start != OMAP_RTC_BASE) {
-		pr_debug("%s: RTC registers at %08x, expected %08x\n",
-			pdev->name, (unsigned) res->start, OMAP_RTC_BASE);
+	if (!res) {
+		pr_debug("%s: RTC resource data missing\n", pdev->name);
 		return -ENOENT;
 	}
 
-	if (res)
-		mem = request_mem_region(res->start,
-				res->end - res->start + 1,
-				pdev->name);
-	else
-		mem = NULL;
+	mem = request_mem_region(res->start, resource_size(res), pdev->name);
 	if (!mem) {
 		pr_debug("%s: RTC registers at %08x are not free\n",
-			pdev->name, OMAP_RTC_BASE);
+			pdev->name, res->start);
 		return -EBUSY;
 	}
 
+	rtc_base = ioremap(res->start, resource_size(res));
+	if (!rtc_base) {
+		pr_debug("%s: RTC registers can't be mapped\n", pdev->name);
+		goto fail;
+	}
+
 	rtc = rtc_device_register(pdev->name, &pdev->dev,
 			&omap_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		pr_debug("%s: can't register RTC device, err %ld\n",
 			pdev->name, PTR_ERR(rtc));
-		goto fail;
+		goto fail0;
 	}
 	platform_set_drvdata(pdev, rtc);
 	dev_set_drvdata(&rtc->dev, mem);
@@ -380,13 +380,14 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
 			dev_name(&rtc->dev), rtc)) {
 		pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
 			pdev->name, omap_rtc_timer);
-		goto fail0;
+		goto fail1;
 	}
-	if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
-			dev_name(&rtc->dev), rtc)) {
+	if ((omap_rtc_timer != omap_rtc_alarm) &&
+		(request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
+			dev_name(&rtc->dev), rtc))) {
 		pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
 			pdev->name, omap_rtc_alarm);
-		goto fail1;
+		goto fail2;
 	}
 
 	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
@@ -419,10 +420,12 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
 
 	return 0;
 
-fail1:
+fail2:
 	free_irq(omap_rtc_timer, NULL);
-fail0:
+fail1:
 	rtc_device_unregister(rtc);
+fail0:
+	iounmap(rtc_base);
 fail:
 	release_resource(mem);
 	return -EIO;
@@ -438,7 +441,9 @@ static int __exit omap_rtc_remove(struct platform_device *pdev)
 	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 
 	free_irq(omap_rtc_timer, rtc);
-	free_irq(omap_rtc_alarm, rtc);
+
+	if (omap_rtc_timer != omap_rtc_alarm)
+		free_irq(omap_rtc_alarm, rtc);
 
 	release_resource(dev_get_drvdata(&rtc->dev));
 	rtc_device_unregister(rtc);