rtc: ds1307: Add support for Epson RX8130CE

Add support for yet another RTC chip, Epson RX8130CE. This time around,
the chip has slightly permutated registers and also the register starts
at 0x10 instead of 0x0 .

So far, we only support the RTC and NVRAM parts of the chip, Alarm and
Timer is not supported.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 16ace2fb0c0a..3cbb7636b405 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -44,6 +44,7 @@ enum ds_type {
 	m41t00,
 	mcp794xx,
 	rx_8025,
+	rx_8130,
 	last_ds_type /* always last */
 	/* rs5c372 too?  different address... */
 };
@@ -169,6 +170,12 @@ static struct chip_desc chips[last_ds_type] = {
 	[ds_3231] = {
 		.alarm		= 1,
 	},
+	[rx_8130] = {
+		.alarm		= 1,
+		/* this is battery backed SRAM */
+		.nvram_offset	= 0x20,
+		.nvram_size	= 4,	/* 32bit (4 word x 8 bit) */
+	},
 	[mcp794xx] = {
 		.alarm		= 1,
 		/* this is battery backed SRAM */
@@ -192,6 +199,7 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "pt7c4338", ds_1307 },
 	{ "rx8025", rx_8025 },
 	{ "isl12057", ds_1337 },
+	{ "rx8130", rx_8130 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ds1307_id);
@@ -587,6 +595,165 @@ static const struct rtc_class_ops ds13xx_rtc_ops = {
 /*----------------------------------------------------------------------*/
 
 /*
+ * Alarm support for rx8130 devices.
+ */
+
+#define RX8130_REG_ALARM_MIN		0x07
+#define RX8130_REG_ALARM_HOUR		0x08
+#define RX8130_REG_ALARM_WEEK_OR_DAY	0x09
+#define RX8130_REG_EXTENSION		0x0c
+#define RX8130_REG_EXTENSION_WADA	(1 << 3)
+#define RX8130_REG_FLAG			0x0d
+#define RX8130_REG_FLAG_AF		(1 << 3)
+#define RX8130_REG_CONTROL0		0x0e
+#define RX8130_REG_CONTROL0_AIE		(1 << 3)
+
+static irqreturn_t rx8130_irq(int irq, void *dev_id)
+{
+	struct ds1307           *ds1307 = dev_id;
+	struct mutex            *lock = &ds1307->rtc->ops_lock;
+	u8 ctl[3];
+	int ret;
+
+	mutex_lock(lock);
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+	if (ret < 0)
+		goto out;
+	if (!(ctl[1] & RX8130_REG_FLAG_AF))
+		goto out;
+	ctl[1] &= ~RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+	if (ret < 0)
+		goto out;
+
+	rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	/* Read alarm registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_ALARM_MIN, ald, 3);
+	if (ret < 0)
+		return ret;
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+	if (ret < 0)
+		return ret;
+
+	t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
+	t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
+
+	/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
+	t->time.tm_sec = -1;
+	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+	t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
+	t->time.tm_wday = -1;
+	t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
+	t->time.tm_mon = -1;
+	t->time.tm_year = -1;
+	t->time.tm_yday = -1;
+	t->time.tm_isdst = -1;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
+		__func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
+
+	return 0;
+}
+
+static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+		"enabled=%d pending=%d\n", __func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
+		t->enabled, t->pending);
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+	if (ret < 0)
+		return ret;
+
+	ctl[0] &= ~RX8130_REG_EXTENSION_WADA;
+	ctl[1] |= RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+	if (ret < 0)
+		return ret;
+
+	/* Hardware alarm precision is 1 minute! */
+	ald[0] = bin2bcd(t->time.tm_min);
+	ald[1] = bin2bcd(t->time.tm_hour);
+	ald[2] = bin2bcd(t->time.tm_mday);
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_ALARM_MIN, ald, 3);
+	if (ret < 0)
+		return ret;
+
+	if (!t->enabled)
+		return 0;
+
+	ctl[2] |= RX8130_REG_CONTROL0_AIE;
+
+	return regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+}
+
+static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	int ret, reg;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	ret = regmap_read(ds1307->regmap, RX8130_REG_CONTROL0, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (enabled)
+		reg |= RX8130_REG_CONTROL0_AIE;
+	else
+		reg &= ~RX8130_REG_CONTROL0_AIE;
+
+	return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
+}
+
+static const struct rtc_class_ops rx8130_rtc_ops = {
+	.read_time	= ds1307_get_time,
+	.set_time	= ds1307_set_time,
+	.read_alarm	= rx8130_read_alarm,
+	.set_alarm	= rx8130_set_alarm,
+	.alarm_irq_enable = rx8130_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
  * Alarm support for mcp794xx devices.
  */
 
@@ -1402,6 +1569,14 @@ static int ds1307_probe(struct i2c_client *client,
 				     DS1307_REG_HOUR << 4 | 0x08, hour);
 		}
 		break;
+	case rx_8130:
+		ds1307->offset = 0x10; /* Seconds starts at 0x10 */
+		rtc_ops = &rx8130_rtc_ops;
+		if (chip->alarm && ds1307->irq > 0) {
+			irq_handler = rx8130_irq;
+			want_irq = true;
+		}
+		break;
 	case ds_1388:
 		ds1307->offset = 1; /* Seconds starts at 1 */
 		break;