Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 276 insertions, 0 deletions

diff --git a/drivers/sbus/char/aurora.h b/drivers/sbus/char/aurora.h
new file mode 100644
index 000000000000..b8b5476d9860
--- /dev/null
+++ b/drivers/sbus/char/aurora.h
@@ -0,0 +1,276 @@
+/*	$Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $
+ *	linux/drivers/sbus/char/aurora.h -- Aurora multiport driver
+ *
+ *	Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro)
+ *
+ *	This code is based on the RISCom/8 multiport serial driver written
+ *	by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial
+ *	driver, written by Linus Torvalds, Theodore T'so and others.
+ *	The Aurora multiport programming info was obtained mainly from the
+ *	Cirrus Logic CD180 documentation (available on the web), and by
+ *	doing heavy tests on the board. Many thanks to Eddie C. Dost for the
+ *	help on the sbus interface.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *	Revision 1.0
+ *
+ *	This is the first public release.
+ *
+ *	This version needs a lot of feedback. This is the version that works
+ *	with _my_ board. My board is model 1600se, revision '@(#)1600se.fth
+ *	1.2 3/28/95 1'. The driver might work with your board, but I do not
+ *	guarantee it. If you have _any_ type of board, I need to know if the
+ *	driver works or not, I need to know exactly your board parameters
+ *	(get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *')
+ *	Also, I need your board revision code, which is written on the board.
+ *	Send me the output of my driver too (it outputs through klogd).
+ *
+ *	If the driver does not work, you can try enabling the debug options
+ *	to see what's wrong or what should be done.
+ *
+ *	I'm sorry about the alignment of the code. It was written in a
+ *	128x48 environment.
+ *
+ *	I must say that I do not like Aurora Technologies' policy. I asked
+ *	them to help me do this driver faster, but they ended by something
+ *	like "don't call us, we'll call you", and I never heard anything
+ *	from them. They told me "knowing the way the board works, I don't
+ *	doubt you and others on the net will make the driver."
+ *	The truth about this board is that it has nothing intelligent on it.
+ *	If you want to say to somebody what kind of board you have, say that
+ *	it uses Cirrus Logic processors (CD180). The power of the board is
+ *	in those two chips. The rest of the board is the interface to the
+ *	sbus and to the peripherals. Still, they did something smart: they
+ *	reversed DTR and RTS to make on-board automatic hardware flow
+ *	control usable.
+ *	Thanks to Aurora Technologies for wasting my time, nerves and money.
+ */
+
+#ifndef __LINUX_AURORA_H
+#define __LINUX_AURORA_H
+
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#ifdef __KERNEL__
+
+/* This is the number of boards to support. I've only tested this driver with
+ * one board, so it might not work.
+ */
+#define AURORA_NBOARD 1
+
+/* Useful ? Yes. But you can safely comment the warnings if they annoy you
+ * (let me say that again: the warnings in the code, not this define). 
+ */
+#define AURORA_PARANOIA_CHECK
+
+/* Well, after many lost nights, I found that the IRQ for this board is
+ * selected from four built-in values by writing some bits in the
+ * configuration register. This causes a little problem to occur: which
+ * IRQ to select ? Which one is the best for the user ? Well, I finally
+ * decided for the following algorithm: if the "bintr" value is not acceptable
+ * (not within type_1_irq[], then test the "intr" value, if that fails too,
+ * try each value from type_1_irq until succeded. Hope it's ok.
+ * You can safely reorder the irq's.
+ */
+#define TYPE_1_IRQS 4
+unsigned char type_1_irq[TYPE_1_IRQS] = {
+	3, 5, 9, 13
+};
+/* I know something about another method of interrupt setting, but not enough.
+ * Also, this is for another type of board, so I first have to learn how to
+ * detect it.
+#define TYPE_2_IRQS 3
+unsigned char type_2_irq[TYPE_2_IRQS] = {
+	0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) **
+	};
+unsigned char type_2_mask[TYPE_2_IRQS] = {
+	32, 64, 128
+	};
+*/
+
+/* The following section should only be modified by those who know what
+ * they're doing (or don't, but want to help with some feedback). Modifying
+ * anything raises a _big_ probability for your system to hang, but the
+ * sacrifice worths. (I sacrificed my ext2fs many, many times...)
+ */
+
+/* This one tries to dump to console the name of almost every function called,
+ * and many other debugging info.
+ */
+#undef AURORA_DEBUG
+
+/* These are the most dangerous and useful defines. They do printk() during
+ * the interrupt processing routine(s), so if you manage to get "flooded" by
+ * irq's, start thinking about the "Power off/on" button...
+ */
+#undef AURORA_INTNORM	/* This one enables the "normal" messages, but some
+			 * of them cause flood, so I preffered putting
+			 * them under a define */
+#undef AURORA_INT_DEBUG /* This one is really bad. */
+
+/* Here's something helpful: after n irq's, the board will be disabled. This
+ * prevents irq flooding during debug (no need to think about power
+ * off/on anymore...)
+ */
+#define AURORA_FLOODPRO	10
+
+/* This one helps finding which irq the board calls, in case of a strange/
+ * unsupported board. AURORA_INT_DEBUG should be enabled, because I don't
+ * think /proc/interrupts or any command will be available in case of an irq
+ * flood... "allirq" is the list of all free irq's.
+ */
+/*
+#define AURORA_ALLIRQ 6
+int allirq[AURORA_ALLIRQ]={
+	2,3,5,7,9,13
+	};
+*/
+
+/* These must not be modified. These values are assumed during the code for
+ * performance optimisations.
+ */
+#define AURORA_NCD180 2 /* two chips per board */
+#define AURORA_NPORT 8  /* 8 ports per chip */
+
+/* several utilities */
+#define AURORA_BOARD(line)	(((line) >> 4) & 0x01)
+#define AURORA_CD180(line)	(((line) >> 3) & 0x01)
+#define AURORA_PORT(line)	((line) & 15)
+
+#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT)
+
+/* Ticks per sec. Used for setting receiver timeout and break length */
+#define AURORA_TPS		4000
+
+#define AURORA_MAGIC	0x0A18
+
+/* Yeah, after heavy testing I decided it must be 6.
+ * Sure, You can change it if needed.
+ */
+#define AURORA_RXFIFO		6	/* Max. receiver FIFO size (1-8) */
+
+#define AURORA_RXTH		7
+
+struct aurora_reg1 {
+	__volatile__ unsigned char r;
+};
+
+struct aurora_reg128 {
+	__volatile__ unsigned char r[128];
+};
+	
+struct aurora_reg4 {
+	__volatile__ unsigned char r[4];
+};
+
+struct Aurora_board {
+	unsigned long		flags;
+	struct aurora_reg1	* r0;	/* This is the board configuration
+					 * register (write-only). */
+	struct aurora_reg128	* r[2];	/* These are the registers for the
+					 * two chips. */
+	struct aurora_reg4	* r3;	/* These are used for hardware-based
+					 * acknowledge. Software-based ack is
+					 * not supported by CD180. */
+	unsigned int		oscfreq; /* The on-board oscillator
+					  * frequency, in Hz. */
+	unsigned char		irq;
+#ifdef MODULE
+	signed char		count;	/* counts the use of the board */
+#endif
+	/* Values for the dtr_rts swapped mode. */
+	unsigned char		DTR;
+	unsigned char		RTS;
+	unsigned char		MSVDTR;
+	unsigned char		MSVRTS;
+	/* Values for hardware acknowledge. */
+	unsigned char		ACK_MINT, ACK_TINT, ACK_RINT;
+};
+
+/* Board configuration register */
+#define AURORA_CFG_ENABLE_IO	8
+#define AURORA_CFG_ENABLE_IRQ	4
+
+/* Board flags */
+#define AURORA_BOARD_PRESENT		0x00000001
+#define AURORA_BOARD_ACTIVE		0x00000002
+#define AURORA_BOARD_TYPE_2		0x00000004	/* don't know how to
+							 * detect this yet */
+#define AURORA_BOARD_DTR_FLOW_OK	0x00000008
+
+/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic
+ * hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you
+ * have a modem and the chip drops DTR, then the modem will drop the carrier
+ * (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and
+ * RTS, which makes the flow control usable. I hope that all the boards made
+ * by Aurora have these two signals swapped. If your's doesn't but you have a
+ * breakout box, you can try to reverse them yourself, then set the following
+ * flag.
+ */
+#undef AURORA_FORCE_DTR_FLOW
+
+/* In fact, a few more words have to be said about hardware flow control.
+ * This driver handles "output" flow control through the on-board facility
+ * CTS Auto Enable. For the "input" flow control there are two cases when
+ * the flow should be controlled. The first case is when the kernel is so
+ * busy that it cannot process IRQ's in time; this flow control can only be
+ * activated by the on-board chip, and if the board has RTS and DTR swapped,
+ * this facility is usable. The second case is when the application is so
+ * busy that it cannot receive bytes from the kernel, and this flow must be
+ * activated by software. This second case is not yet implemented in this
+ * driver. Unfortunately, I estimate that the second case is the one that
+ * occurs the most.
+ */
+
+
+struct Aurora_port {
+	int			magic;
+	int			baud_base;
+	int			flags;
+	struct tty_struct 	* tty;
+	int			count;
+	int			blocked_open;
+	long			event;
+	int			timeout;
+	int			close_delay;
+	unsigned char 		* xmit_buf;
+	int			custom_divisor;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	struct tq_struct	tqueue;
+	struct tq_struct	tqueue_hangup;
+	short			wakeup_chars;
+	short			break_length;
+	unsigned short		closing_wait;
+	unsigned char		mark_mask;
+	unsigned char		SRER;
+	unsigned char		MSVR;
+	unsigned char		COR2;
+#ifdef AURORA_REPORT_OVERRUN
+	unsigned long		overrun;
+#endif	
+#ifdef AURORA_REPORT_FIFO
+	unsigned long		hits[10];
+#endif
+};
+
+#endif
+#endif /*__LINUX_AURORA_H*/
+