sparc: Delete bare sbus char bpp driver, obsoleted by parport_sunbpp

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 0 insertions, 1064 deletions

diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig
index 400c65bfb8c7..9cd54ec63aef 100644
--- a/drivers/sbus/char/Kconfig
+++ b/drivers/sbus/char/Kconfig
@@ -30,14 +30,6 @@ config OBP_FLASH
 	  The OpenBoot PROM on Ultra systems is flashable. If you want to be
 	  able to upgrade the OBP firmware, say Y here.
 
-config SUN_BPP
-	tristate "Bidirectional parallel port support (OBSOLETE)"
-	depends on EXPERIMENTAL
-	help
-	  Say Y here to support Sun's obsolete variant of IEEE1284
-	  bidirectional parallel port protocol as /dev/bppX.  Can be built on
-	  x86 machines.
-
 config SUN_VIDEOPIX
 	tristate "Videopix Frame Grabber (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (BROKEN || !64BIT)
diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile
index 7ab060e9a5fe..d8b2d0c0ebd5 100644
--- a/drivers/sbus/char/Makefile
+++ b/drivers/sbus/char/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_WATCHDOG_RIO)		+= riowatchdog.o
 obj-$(CONFIG_OBP_FLASH)			+= flash.o
 obj-$(CONFIG_SUN_OPENPROMIO)		+= openprom.o
 obj-$(CONFIG_SUN_MOSTEK_RTC)		+= rtc.o
-obj-$(CONFIG_SUN_BPP)			+= bpp.o
 obj-$(CONFIG_SUN_VIDEOPIX)		+= vfc.o
 obj-$(CONFIG_TADPOLE_TS102_UCTRL)	+= uctrl.o
 obj-$(CONFIG_SUN_JSFLASH)		+= jsflash.o
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
deleted file mode 100644
index bba21e053a1b..000000000000
--- a/drivers/sbus/char/bpp.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/*
- * drivers/sbus/char/bpp.c
- *
- * Copyright (c) 1995 Picture Elements
- *      Stephen Williams (steve@icarus.com)
- *      Gus Baldauf (gbaldauf@ix.netcom.com)
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/smp_lock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#if defined(__i386__)
-# include <asm/system.h>
-#endif
-
-#if defined(__sparc__)
-# include <linux/init.h>
-# include <linux/delay.h>         /* udelay() */
-
-# include <asm/oplib.h>           /* OpenProm Library */
-# include <asm/sbus.h>
-#endif
-
-#include <asm/bpp.h>
-
-#define BPP_PROBE_CODE 0x55
-#define BPP_DELAY 100
-
-static const unsigned  BPP_MAJOR = LP_MAJOR;
-static const char *bpp_dev_name = "bpp";
-
-/* When switching from compatibility to a mode where I can read, try
-   the following mode first. */
-
-/* const unsigned char DEFAULT_ECP = 0x10; */
-static const unsigned char DEFAULT_ECP = 0x30;
-static const unsigned char DEFAULT_NIBBLE = 0x00;
-
-/*
- * These are 1284 time constraints, in units of jiffies.
- */
-
-static const unsigned long TIME_PSetup = 1;
-static const unsigned long TIME_PResponse = 6;
-static const unsigned long TIME_IDLE_LIMIT = 2000;
-
-/*
- * One instance per supported subdevice...
- */
-# define BPP_NO 3
-
-enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
-
-struct inst {
-      unsigned present  : 1; /* True if the hardware exists */
-      unsigned enhanced : 1; /* True if the hardware in "enhanced" */
-      unsigned opened   : 1; /* True if the device is opened already */
-      unsigned run_flag : 1; /* True if waiting for a repeate byte */
-
-      unsigned char direction; /* 0 --> out, 0x20 --> IN */
-      unsigned char pp_state; /* State of host controlled pins. */
-      enum IEEE_Mode mode;
-
-      unsigned char run_length;
-      unsigned char repeat_byte;
-};
-
-static struct inst instances[BPP_NO];
-
-#if defined(__i386__)
-
-static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
-
-/*
- * These are for data access.
- * Control lines accesses are hidden in set_bits() and get_bits().
- * The exception is the probe procedure, which is system-dependent.
- */
-#define bpp_outb_p(data, base)  outb_p((data), (base))
-#define bpp_inb(base)  inb(base)
-#define bpp_inb_p(base)  inb_p(base)
-
-/*
- * This method takes the pin values mask and sets the hardware pins to
- * the requested value: 1 == high voltage, 0 == low voltage. This
- * burries the annoying PC bit inversion and preserves the direction
- * flag.
- */
-static void set_pins(unsigned short pins, unsigned minor)
-{
-      unsigned char bits = instances[minor].direction;  /* == 0x20 */
-
-      if (! (pins & BPP_PP_nStrobe))   bits |= 1;
-      if (! (pins & BPP_PP_nAutoFd))   bits |= 2;
-      if (   pins & BPP_PP_nInit)      bits |= 4;
-      if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
-
-      instances[minor].pp_state = bits;
-
-      outb_p(bits, base_addrs[minor]+2);
-}
-
-static unsigned short get_pins(unsigned minor)
-{
-      unsigned short bits = 0;
-
-      unsigned value = instances[minor].pp_state;
-      if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
-      if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
-      if (value & 0x04)     bits |= BPP_PP_nInit;
-      if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
-
-      value = inb_p(base_addrs[minor]+1);
-      if (value & 0x08)     bits |= BPP_GP_nFault;
-      if (value & 0x10)     bits |= BPP_GP_Select;
-      if (value & 0x20)     bits |= BPP_GP_PError;
-      if (value & 0x40)     bits |= BPP_GP_nAck;
-      if (! (value & 0x80)) bits |= BPP_GP_Busy;
-
-      return bits;
-}
-
-#endif /* __i386__ */
-
-#if defined(__sparc__)
-
-/*
- * Register block
- */
-      /* DMA registers */
-#define BPP_CSR      0x00
-#define BPP_ADDR     0x04
-#define BPP_BCNT     0x08
-#define BPP_TST_CSR  0x0C
-      /* Parallel Port registers */
-#define BPP_HCR      0x10
-#define BPP_OCR      0x12
-#define BPP_DR       0x14
-#define BPP_TCR      0x15
-#define BPP_OR       0x16
-#define BPP_IR       0x17
-#define BPP_ICR      0x18
-#define BPP_SIZE     0x1A
-
-/* BPP_CSR.  Bits of type RW1 are cleared with writing '1'. */
-#define P_DEV_ID_MASK   0xf0000000      /* R   */
-#define P_DEV_ID_ZEBRA  0x40000000
-#define P_DEV_ID_L64854 0xa0000000      /*      == NCR 89C100+89C105. Pity. */
-#define P_NA_LOADED     0x08000000      /* R    NA wirtten but was not used */
-#define P_A_LOADED      0x04000000      /* R    */
-#define P_DMA_ON        0x02000000      /* R    DMA is not disabled */
-#define P_EN_NEXT       0x01000000      /* RW   */
-#define P_TCI_DIS       0x00800000      /* RW   TCI forbidden from interrupts */
-#define P_DIAG          0x00100000      /* RW   Disables draining and resetting
-                                                of P-FIFO on loading of P_ADDR*/
-#define P_BURST_SIZE    0x000c0000      /* RW   SBus burst size */
-#define P_BURST_8       0x00000000
-#define P_BURST_4       0x00040000
-#define P_BURST_1       0x00080000      /*      "No burst" write */
-#define P_TC            0x00004000      /* RW1  Term Count, can be cleared when
-                                           P_EN_NEXT=1 */
-#define P_EN_CNT        0x00002000      /* RW   */
-#define P_EN_DMA        0x00000200      /* RW   */
-#define P_WRITE         0x00000100      /* R    DMA dir, 1=to ram, 0=to port */
-#define P_RESET         0x00000080      /* RW   */
-#define P_SLAVE_ERR     0x00000040      /* RW1  Access size error */
-#define P_INVALIDATE    0x00000020      /* W    Drop P-FIFO */
-#define P_INT_EN        0x00000010      /* RW   OK to P_INT_PEND||P_ERR_PEND */
-#define P_DRAINING      0x0000000c      /* R    P-FIFO is draining to memory */
-#define P_ERR_PEND      0x00000002      /* R    */
-#define P_INT_PEND      0x00000001      /* R    */
-
-/* BPP_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* BPP_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* BPP_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* BPP_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* BPP_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* BPP_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-static void __iomem *base_addrs[BPP_NO];
-
-#define bpp_outb_p(data, base)	sbus_writeb(data, (base) + BPP_DR)
-#define bpp_inb_p(base)		sbus_readb((base) + BPP_DR)
-#define bpp_inb(base)		sbus_readb((base) + BPP_DR)
-
-static void set_pins(unsigned short pins, unsigned minor)
-{
-      void __iomem *base = base_addrs[minor];
-      unsigned char bits_tcr = 0, bits_or = 0;
-
-      if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
-      if (   pins & BPP_PP_nStrobe)          bits_tcr |= P_TCR_DS;
-
-      if (   pins & BPP_PP_nAutoFd)          bits_or |= P_OR_AFXN;
-      if (! (pins & BPP_PP_nInit))           bits_or |= P_OR_INIT;
-      if (! (pins & BPP_PP_nSelectIn))       bits_or |= P_OR_SLCT_IN;
-
-      sbus_writeb(bits_or, base + BPP_OR);
-      sbus_writeb(bits_tcr, base + BPP_TCR);
-}
-
-/*
- * i386 people read output pins from a software image.
- * We may get them back from hardware.
- * Again, inversion of pins must he buried here.
- */
-static unsigned short get_pins(unsigned minor)
-{
-      void __iomem *base = base_addrs[minor];
-      unsigned short bits = 0;
-      unsigned value_tcr = sbus_readb(base + BPP_TCR);
-      unsigned value_ir = sbus_readb(base + BPP_IR);
-      unsigned value_or = sbus_readb(base + BPP_OR);
-
-      if (value_tcr & P_TCR_DS)         bits |= BPP_PP_nStrobe;
-      if (value_or & P_OR_AFXN)         bits |= BPP_PP_nAutoFd;
-      if (! (value_or & P_OR_INIT))     bits |= BPP_PP_nInit;
-      if (! (value_or & P_OR_SLCT_IN))  bits |= BPP_PP_nSelectIn;
-
-      if (value_ir & P_IR_ERR)          bits |= BPP_GP_nFault;
-      if (! (value_ir & P_IR_SLCT))     bits |= BPP_GP_Select;
-      if (! (value_ir & P_IR_PE))       bits |= BPP_GP_PError;
-      if (! (value_tcr & P_TCR_ACK))    bits |= BPP_GP_nAck;
-      if (value_tcr & P_TCR_BUSY)       bits |= BPP_GP_Busy;
-
-      return bits;
-}
-
-#endif /* __sparc__ */
-
-static void snooze(unsigned long snooze_time, unsigned minor)
-{
-	schedule_timeout_uninterruptible(snooze_time + 1);
-}
-
-static int wait_for(unsigned short set, unsigned short clr,
-               unsigned long delay, unsigned minor)
-{
-      unsigned short pins = get_pins(minor);
-
-      unsigned long extime = 0;
-
-      /*
-       * Try a real fast scan for the first jiffy, in case the device
-       * responds real good. The first while loop guesses an expire
-       * time accounting for possible wraparound of jiffies.
-       */
-      while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
-      while ( (time_before(jiffies, extime))
-              && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-            pins = get_pins(minor);
-      }
-
-      delay -= 1;
-
-      /*
-       * If my delay expired or the pins are still not where I want
-       * them, then resort to using the timer and greatly reduce my
-       * sample rate. If the peripheral is going to be slow, this will
-       * give the CPU up to some more worthy process.
-       */
-      while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-
-            snooze(1, minor);
-            pins = get_pins(minor);
-            delay -= 1;
-      }
-
-      if (delay == 0) return -1;
-      else return pins;
-}
-
-/*
- * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
- * errno means something broke, and I do not yet know how to fix it.
- */
-static int negotiate(unsigned char mode, unsigned minor)
-{
-      int rc;
-      unsigned short pins = get_pins(minor);
-      if (pins & BPP_PP_nSelectIn) return -EIO;
-
-
-        /* Event 0: Write the mode to the data lines */
-      bpp_outb_p(mode, base_addrs[minor]);
-
-      snooze(TIME_PSetup, minor);
-
-        /* Event 1: Strobe the mode code into the peripheral */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Event 2: Peripheral responds as a 1284 device. */
-      rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
-                BPP_GP_nAck,
-                TIME_PResponse,
-                minor);
-
-      if (rc == -1) return -ETIMEDOUT;
-
-        /* Event 3: latch extensibility request */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
-
-        /* ... quick nap while peripheral ponders the byte i'm sending...*/
-      snooze(1, minor);
-
-        /* Event 4: restore strobe, to ACK peripheral's response. */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Event 6: Peripheral latches response bits */
-      rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
-      if (rc == -1) return -EIO;
-
-        /* A 1284 device cannot refuse nibble mode */
-      if (mode == DEFAULT_NIBBLE) return 0;
-
-      if (pins & BPP_GP_Select) return 0;
-
-      return -EPROTONOSUPPORT;
-}
-
-static int terminate(unsigned minor)
-{
-      int rc;
-
-        /* Event 22: Request termination of 1284 mode */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Events 23 and 24: ACK termination request. */
-      rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
-                BPP_GP_nAck,
-                TIME_PSetup+TIME_PResponse,
-                minor);
-
-      instances[minor].direction = 0;
-      instances[minor].mode = COMPATIBILITY;
-
-      if (rc == -1) {
-          return -EIO;
-      }
-
-        /* Event 25: Handshake by lowering nAutoFd */
-      set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Event 26: Peripheral wiggles lines... */
-
-        /* Event 27: Peripheral sets nAck HIGH to ack handshake */
-      rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-      if (rc == -1) {
-          set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-          return -EIO;
-      }
-
-        /* Event 28: Finish phase by raising nAutoFd */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-      return 0;
-}
-
-static DEFINE_SPINLOCK(bpp_open_lock);
-
-/*
- * Allow only one process to open the device at a time.
- */
-static int bpp_open(struct inode *inode, struct file *f)
-{
-      unsigned minor = iminor(inode);
-      int ret;
-
-      lock_kernel();
-      spin_lock(&bpp_open_lock);
-      ret = 0;
-      if (minor >= BPP_NO) {
-	      ret = -ENODEV;
-      } else {
-	      if (! instances[minor].present) {
-		      ret = -ENODEV;
-	      } else {
-		      if (instances[minor].opened) 
-			      ret = -EBUSY;
-		      else
-			      instances[minor].opened = 1;
-	      }
-      }
-      spin_unlock(&bpp_open_lock);
-      unlock_kernel();
-
-      return ret;
-}
-
-/*
- * When the process closes the device, this method is called to clean
- * up and reset the hardware. Always leave the device in compatibility
- * mode as this is a reasonable place to clean up from messes made by
- * ioctls, or other mayhem.
- */
-static int bpp_release(struct inode *inode, struct file *f)
-{
-      unsigned minor = iminor(inode);
-
-      spin_lock(&bpp_open_lock);
-      instances[minor].opened = 0;
-
-      if (instances[minor].mode != COMPATIBILITY)
-	      terminate(minor);
-
-      spin_unlock(&bpp_open_lock);
-
-      return 0;
-}
-
-static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
-{
-      unsigned long remaining = cnt;
-      long rc;
-
-      while (remaining > 0) {
-          unsigned char byte = 0;
-          int pins;
-
-          /* Event 7: request nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
-          /* Wait for event 9: Peripher strobes first nibble */
-          pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
-          if (pins == -1) return -ETIMEDOUT;
-
-          /* Event 10: I handshake nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
-          if (pins & BPP_GP_nFault) byte |= 0x01;
-          if (pins & BPP_GP_Select) byte |= 0x02;
-          if (pins & BPP_GP_PError) byte |= 0x04;
-          if (pins & BPP_GP_Busy)   byte |= 0x08;
-
-          /* Wait for event 11: Peripheral handshakes nibble */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-
-          /* Event 7: request nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
-          /* Wait for event 9: Peripher strobes first nibble */
-          pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-          /* Event 10: I handshake nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
-          if (pins & BPP_GP_nFault) byte |= 0x10;
-          if (pins & BPP_GP_Select) byte |= 0x20;
-          if (pins & BPP_GP_PError) byte |= 0x40;
-          if (pins & BPP_GP_Busy)   byte |= 0x80;
-
-          if (put_user(byte, c))
-		  return -EFAULT;
-          c += 1;
-          remaining -= 1;
-
-          /* Wait for event 11: Peripheral handshakes nibble */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-          if (rc == -1) return -EIO;
-      }
-
-      return cnt - remaining;
-}
-
-static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
-{
-      unsigned long remaining;
-      long rc;
-
-        /* Turn ECP mode from forward to reverse if needed. */
-      if (! instances[minor].direction) {
-          unsigned short pins = get_pins(minor);
-
-            /* Event 38: Turn the bus around */
-          instances[minor].direction = 0x20;
-          pins &= ~BPP_PP_nAutoFd;
-          set_pins(pins, minor);
-
-            /* Event 39: Set pins for reverse mode. */
-          snooze(TIME_PSetup, minor);
-          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
-            /* Wait for event 40: Peripheral ready to be strobed */
-          rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-      }
-
-      remaining = cnt;
-
-      while (remaining > 0) {
-
-            /* If there is a run length for a repeated byte, repeat */
-            /* that byte a few times. */
-          if (instances[minor].run_length && !instances[minor].run_flag) {
-
-              char buffer[128];
-              unsigned idx;
-              unsigned repeat = remaining < instances[minor].run_length
-                                     ? remaining
-                               : instances[minor].run_length;
-
-              for (idx = 0 ;  idx < repeat ;  idx += 1)
-                buffer[idx] = instances[minor].repeat_byte;
-
-              if (copy_to_user(c, buffer, repeat))
-		      return -EFAULT;
-              remaining -= repeat;
-              c += repeat;
-              instances[minor].run_length -= repeat;
-          }
-
-          if (remaining == 0) break;
-
-
-            /* Wait for Event 43: Data active on the bus. */
-          rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
-          if (rc == -1) break;
-
-          if (rc & BPP_GP_Busy) {
-                /* OK, this is data. read it in. */
-              unsigned char byte = bpp_inb(base_addrs[minor]);
-              if (put_user(byte, c))
-		      return -EFAULT;
-              c += 1;
-              remaining -= 1;
-
-              if (instances[minor].run_flag) {
-                  instances[minor].repeat_byte = byte;
-                  instances[minor].run_flag = 0;
-              }
-
-          } else {
-              unsigned char byte = bpp_inb(base_addrs[minor]);
-              if (byte & 0x80) {
-                  printk("bpp%d: "
-                         "Ignoring ECP channel %u from device.\n",
-                         minor, byte & 0x7f);
-              } else {
-                  instances[minor].run_length = byte;
-                  instances[minor].run_flag = 1;
-              }
-          }
-
-            /* Event 44: I got it. */
-          set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
-
-            /* Wait for event 45: peripheral handshake */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-             /* Event 46: Finish handshake */
-          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
-      }
-
-
-      return cnt - remaining;
-}
-
-static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
-{
-      long rc;
-      unsigned minor = iminor(f->f_path.dentry->d_inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-      switch (instances[minor].mode) {
-
-        default:
-          if (instances[minor].mode != COMPATIBILITY)
-            terminate(minor);
-
-          if (instances[minor].enhanced) {
-              /* For now, do all reads with ECP-RLE mode */
-              unsigned short pins;
-
-              rc = negotiate(DEFAULT_ECP, minor);
-              if (rc < 0) break;
-
-              instances[minor].mode = ECP_RLE;
-
-              /* Event 30: set nAutoFd low to setup for ECP mode */
-              pins = get_pins(minor);
-              pins &= ~BPP_PP_nAutoFd;
-              set_pins(pins, minor);
-
-              /* Wait for Event 31: peripheral ready */
-              rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-              if (rc == -1) return -ETIMEDOUT;
-
-              rc = read_ecp(minor, c, cnt);
-
-          } else {
-              rc = negotiate(DEFAULT_NIBBLE, minor);
-              if (rc < 0) break;
-
-              instances[minor].mode = NIBBLE;
-
-              rc = read_nibble(minor, c, cnt);
-          }
-          break;
-
-        case NIBBLE:
-          rc = read_nibble(minor, c, cnt);
-          break;
-
-        case ECP:
-        case ECP_RLE:
-          rc = read_ecp(minor, c, cnt);
-          break;
-
-      }
-
-
-      return rc;
-}
-
-/*
- * Compatibility mode handshaking is a matter of writing data,
- * strobing it, and waiting for the printer to stop being busy.
- */
-static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
-{
-      long rc;
-      unsigned short pins = get_pins(minor);
-
-      unsigned long remaining = cnt;
-
-
-      while (remaining > 0) {
-            unsigned char byte;
-
-            if (get_user(byte, c))
-		    return -EFAULT;
-            c += 1;
-
-            rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
-            if (rc == -1) return -ETIMEDOUT;
-
-            bpp_outb_p(byte, base_addrs[minor]);
-            remaining -= 1;
-          /* snooze(1, minor); */
-
-          pins &= ~BPP_PP_nStrobe;
-          set_pins(pins, minor);
-
-          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-
-          pins |= BPP_PP_nStrobe;
-          set_pins(pins, minor);
-      }
-
-      return cnt - remaining;
-}
-
-/*
- * Write data using ECP mode. Watch out that the port may be set up
- * for reading. If so, turn the port around.
- */
-static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
-{
-      unsigned short pins = get_pins(minor);
-      unsigned long remaining = cnt;
-
-      if (instances[minor].direction) {
-          int rc;
-
-            /* Event 47 Request bus be turned around */
-          pins |= BPP_PP_nInit;
-          set_pins(pins, minor);
-
-            /* Wait for Event 49: Peripheral relinquished bus */
-          rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-
-          pins |= BPP_PP_nAutoFd;
-          instances[minor].direction = 0;
-          set_pins(pins, minor);
-      }
-
-      while (remaining > 0) {
-          unsigned char byte;
-          int rc;
-
-          if (get_user(byte, c))
-		  return -EFAULT;
-
-          rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-          c += 1;
-
-          bpp_outb_p(byte, base_addrs[minor]);
-
-          pins &= ~BPP_PP_nStrobe;
-          set_pins(pins, minor);
-
-          pins |= BPP_PP_nStrobe;
-          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-          if (rc == -1) return -EIO;
-
-          set_pins(pins, minor);
-      }
-
-      return cnt - remaining;
-}
-
-/*
- * Write to the peripheral. Be sensitive of the current mode. If I'm
- * in a mode that can be turned around (ECP) then just do
- * that. Otherwise, terminate and do my writing in compat mode. This
- * is the safest course as any device can handle it.
- */
-static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
-{
-      long errno = 0;
-      unsigned minor = iminor(f->f_path.dentry->d_inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-      switch (instances[minor].mode) {
-
-        case ECP:
-        case ECP_RLE:
-          errno = write_ecp(minor, c, cnt);
-          break;
-        case COMPATIBILITY:
-          errno = write_compat(minor, c, cnt);
-          break;
-        default:
-          terminate(minor);
-          errno = write_compat(minor, c, cnt);
-      }
-
-      return errno;
-}
-
-static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
-		 unsigned long arg)
-{
-      int errno = 0;
-
-      unsigned minor = iminor(inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-
-      switch (cmd) {
-
-        case BPP_PUT_PINS:
-          set_pins(arg, minor);
-          break;
-
-        case BPP_GET_PINS:
-          errno = get_pins(minor);
-          break;
-
-        case BPP_PUT_DATA:
-          bpp_outb_p(arg, base_addrs[minor]);
-          break;
-
-        case BPP_GET_DATA:
-          errno = bpp_inb_p(base_addrs[minor]);
-          break;
-
-        case BPP_SET_INPUT:
-          if (arg)
-            if (instances[minor].enhanced) {
-                unsigned short bits = get_pins(minor);
-                instances[minor].direction = 0x20;
-                set_pins(bits, minor);
-            } else {
-                errno = -ENOTTY;
-            }
-          else {
-              unsigned short bits = get_pins(minor);
-              instances[minor].direction = 0x00;
-              set_pins(bits, minor);
-          }
-          break;
-
-        default:
-            errno = -EINVAL;
-      }
-
-      return errno;
-}
-
-static const struct file_operations bpp_fops = {
-	.owner =	THIS_MODULE,
-	.read =		bpp_read,
-	.write =	bpp_write,
-	.ioctl =	bpp_ioctl,
-	.open =		bpp_open,
-	.release =	bpp_release,
-};
-
-#if defined(__i386__)
-
-#define collectLptPorts()  {}
-
-static void probeLptPort(unsigned idx)
-{
-      unsigned int testvalue;
-      const unsigned short lpAddr = base_addrs[idx];
-
-      instances[idx].present = 0;
-      instances[idx].enhanced = 0;
-      instances[idx].direction = 0;
-      instances[idx].mode = COMPATIBILITY;
-      instances[idx].run_length = 0;
-      instances[idx].run_flag = 0;
-      if (!request_region(lpAddr,3, bpp_dev_name)) return;
-
-      /*
-       * First, make sure the instance exists. Do this by writing to
-       * the data latch and reading the value back. If the port *is*
-       * present, test to see if it supports extended-mode
-       * operation. This will be required for IEEE1284 reverse
-       * transfers.
-       */
-
-      outb_p(BPP_PROBE_CODE, lpAddr);
-      for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-            ;
-      testvalue = inb_p(lpAddr);
-      if (testvalue == BPP_PROBE_CODE) {
-            unsigned save;
-            instances[idx].present = 1;
-
-            save = inb_p(lpAddr+2);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            outb_p(save|0x20, lpAddr+2);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            outb_p(~BPP_PROBE_CODE, lpAddr);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            testvalue = inb_p(lpAddr);
-            if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
-                  instances[idx].enhanced = 0;
-            else
-                  instances[idx].enhanced = 1;
-            outb_p(save, lpAddr+2);
-      }
-      else {
-            release_region(lpAddr,3);
-      }
-      /*
-       * Leave the port in compat idle mode.
-       */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
-      printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
-            instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
-}
-
-static inline void freeLptPort(int idx)
-{
-      release_region(base_addrs[idx], 3);
-}
-
-#endif
-
-#if defined(__sparc__)
-
-static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
-{
-      return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
-}
-
-static int collectLptPorts(void)
-{
-	struct sbus_bus *bus;
-	struct sbus_dev *dev;
-	int count;
-
-	count = 0;
-	for_all_sbusdev(dev, bus) {
-		if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
-			if (count >= BPP_NO) {
-				printk(KERN_NOTICE
-				       "bpp: More than %d bpp ports,"
-				       " rest is ignored\n", BPP_NO);
-				return count;
-			}
-			base_addrs[count] = map_bpp(dev, count);
-			count++;
-		}
-	}
-	return count;
-}
-
-static void probeLptPort(unsigned idx)
-{
-      void __iomem *rp = base_addrs[idx];
-      __u32 csr;
-      char *brand;
-
-      instances[idx].present = 0;
-      instances[idx].enhanced = 0;
-      instances[idx].direction = 0;
-      instances[idx].mode = COMPATIBILITY;
-      instances[idx].run_length = 0;
-      instances[idx].run_flag = 0;
-
-      if (!rp) return;
-
-      instances[idx].present = 1;
-      instances[idx].enhanced = 1;   /* Sure */
-
-      csr = sbus_readl(rp + BPP_CSR);
-      if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
-            udelay(20);
-            csr = sbus_readl(rp + BPP_CSR);
-            if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
-                  printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
-            }
-      }
-      printk("bpp%d: reset with 0x%08x ..", idx, csr);
-      sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
-      udelay(500);
-      sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
-      csr = sbus_readl(rp + BPP_CSR);
-      printk(" done with csr=0x%08x ocr=0x%04x\n",
-         csr, sbus_readw(rp + BPP_OCR));
-
-      switch (csr & P_DEV_ID_MASK) {
-      case P_DEV_ID_ZEBRA:
-            brand = "Zebra";
-            break;
-      case P_DEV_ID_L64854:
-            brand = "DMA2";
-            break;
-      default:
-            brand = "Unknown";
-      }
-      printk("bpp%d: %s at %p\n", idx, brand, rp);
-
-      /*
-       * Leave the port in compat idle mode.
-       */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
-      return;
-}
-
-static inline void freeLptPort(int idx)
-{
-      sbus_iounmap(base_addrs[idx], BPP_SIZE);
-}
-
-#endif
-
-static int __init bpp_init(void)
-{
-	int rc;
-	unsigned idx;
-
-	rc = collectLptPorts();
-	if (rc == 0)
-		return -ENODEV;
-
-	rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
-	if (rc < 0)
-		return rc;
-
-	for (idx = 0; idx < BPP_NO; idx++) {
-		instances[idx].opened = 0;
-		probeLptPort(idx);
-	}
-
-	return 0;
-}
-
-static void __exit bpp_cleanup(void)
-{
-	unsigned idx;
-
-	unregister_chrdev(BPP_MAJOR, bpp_dev_name);
-
-	for (idx = 0;  idx < BPP_NO; idx++) {
-		if (instances[idx].present)
-			freeLptPort(idx);
-	}
-}
-
-module_init(bpp_init);
-module_exit(bpp_cleanup);
-
-MODULE_LICENSE("GPL");
-