Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
new file mode 100644
index 000000000000..ff2554f4cb80
--- /dev/null
+++ b/drivers/scsi/arm/oak.c
@@ -0,0 +1,217 @@
+/*
+ * Oak Generic NCR5380 driver
+ *
+ * Copyright 1995-2002, Russell King
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+
+#include <asm/ecard.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "../scsi.h"
+#include <scsi/scsi_host.h>
+
+#define AUTOSENSE
+/*#define PSEUDO_DMA*/
+
+#define OAKSCSI_PUBLIC_RELEASE 1
+
+#define NCR5380_read(reg)		oakscsi_read(_instance, reg)
+#define NCR5380_write(reg, value)	oakscsi_write(_instance, reg, value)
+#define NCR5380_intr			oakscsi_intr
+#define NCR5380_queue_command		oakscsi_queue_command
+#define NCR5380_proc_info		oakscsi_proc_info
+
+#define NCR5380_implementation_fields	int port, ctrl
+#define NCR5380_local_declare()		struct Scsi_Host *_instance
+#define NCR5380_setup(instance)		_instance = instance
+
+#define BOARD_NORMAL	0
+#define BOARD_NCR53C400	1
+
+#include "../NCR5380.h"
+
+#undef START_DMA_INITIATOR_RECEIVE_REG
+#define START_DMA_INITIATOR_RECEIVE_REG (7 + 128)
+
+const char * oakscsi_info (struct Scsi_Host *spnt)
+{
+	return "";
+}
+
+#define STAT(p)   inw(p + 144)
+extern void inswb(int from, void *to, int len);
+
+static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
+              int len)
+{
+  int iobase = instance->io_port;
+printk("writing %p len %d\n",addr, len);
+  if(!len) return -1;
+
+  while(1)
+  {
+    int status;
+    while(((status = STAT(iobase)) & 0x100)==0);
+  }
+}
+
+static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
+              int len)
+{
+  int iobase = instance->io_port;
+printk("reading %p len %d\n", addr, len);
+  while(len > 0)
+  {
+    int status, timeout;
+    unsigned long b;
+    
+    timeout = 0x01FFFFFF;
+    
+    while(((status = STAT(iobase)) & 0x100)==0)
+    {
+      timeout--;
+      if(status & 0x200 || !timeout)
+      {
+        printk("status = %08X\n",status);
+        return 1;
+      }
+    }
+    if(len >= 128)
+    {
+      inswb(iobase + 136, addr, 128);
+      addr += 128;
+      len -= 128;
+    }
+    else
+    {
+      b = (unsigned long) inw(iobase + 136);
+      *addr ++ = b;
+      len -= 1;
+      if(len)
+        *addr ++ = b>>8;
+      len -= 1;
+    }
+  }
+  return 0;
+}
+
+#define oakscsi_read(instance,reg)	(inb((instance)->io_port + (reg)))
+#define oakscsi_write(instance,reg,val)	(outb((val), (instance)->io_port + (reg)))
+
+#undef STAT
+
+#include "../NCR5380.c"
+
+static Scsi_Host_Template oakscsi_template = {
+	.module			= THIS_MODULE,
+	.proc_info		= oakscsi_proc_info,
+	.name			= "Oak 16-bit SCSI",
+	.info			= oakscsi_info,
+	.queuecommand		= oakscsi_queue_command,
+	.eh_abort_handler	= NCR5380_abort,
+	.eh_device_reset_handler= NCR5380_device_reset,
+	.eh_bus_reset_handler	= NCR5380_bus_reset,
+	.eh_host_reset_handler	= NCR5380_host_reset,
+	.can_queue		= 16,
+	.this_id		= 7,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= 2,
+	.use_clustering		= DISABLE_CLUSTERING,
+	.proc_name		= "oakscsi",
+};
+
+static int __devinit
+oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+	struct Scsi_Host *host;
+	int ret = -ENOMEM;
+
+	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
+	if (!host)
+		goto out;
+
+	host->io_port = ecard_address(ec, ECARD_MEMC, 0);
+	host->irq = IRQ_NONE;
+	host->n_io_port = 255;
+
+	ret = -EBUSY;
+	if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
+		goto unreg;
+
+	NCR5380_init(host, 0);
+
+	printk("scsi%d: at port 0x%08lx irqs disabled",
+		host->host_no, host->io_port);
+	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
+		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
+	printk("\nscsi%d:", host->host_no);
+	NCR5380_print_options(host);
+	printk("\n");
+
+	ret = scsi_add_host(host, &ec->dev);
+	if (ret)
+		goto out_release;
+
+	scsi_scan_host(host);
+	goto out;
+
+ out_release:
+	release_region(host->io_port, host->n_io_port);
+ unreg:
+	scsi_host_put(host);
+ out:
+	return ret;
+}
+
+static void __devexit oakscsi_remove(struct expansion_card *ec)
+{
+	struct Scsi_Host *host = ecard_get_drvdata(ec);
+
+	ecard_set_drvdata(ec, NULL);
+	scsi_remove_host(host);
+
+	NCR5380_exit(host);
+	release_region(host->io_port, host->n_io_port);
+	scsi_host_put(host);
+}
+
+static const struct ecard_id oakscsi_cids[] = {
+	{ MANU_OAK, PROD_OAK_SCSI },
+	{ 0xffff, 0xffff }
+};
+
+static struct ecard_driver oakscsi_driver = {
+	.probe		= oakscsi_probe,
+	.remove		= __devexit_p(oakscsi_remove),
+	.id_table	= oakscsi_cids,
+	.drv = {
+		.name		= "oakscsi",
+	},
+};
+
+static int __init oakscsi_init(void)
+{
+	return ecard_register_driver(&oakscsi_driver);
+}
+
+static void __exit oakscsi_exit(void)
+{
+	ecard_remove_driver(&oakscsi_driver);
+}
+
+module_init(oakscsi_init);
+module_exit(oakscsi_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("Oak SCSI driver");
+MODULE_LICENSE("GPL");
+