diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/nsp32.c | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/nsp32.c')
| -rw-r--r-- | drivers/scsi/nsp32.c | 3585 |
1 files changed, 3585 insertions, 0 deletions
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c new file mode 100644 index 000000000000..acfead1e9f17 --- /dev/null +++ b/drivers/scsi/nsp32.c @@ -0,0 +1,3585 @@ +/* + * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver + * Copyright (C) 2001, 2002, 2003 + * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> + * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * Revision History: + * 1.0: Initial Release. + * 1.1: Add /proc SDTR status. + * Remove obsolete error handler nsp32_reset. + * Some clean up. + * 1.2: PowerPC (big endian) support. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ctype.h> + +#include <asm/dma.h> +#include <asm/system.h> +#include <asm/io.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_ioctl.h> + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) +# include <linux/blk.h> +#endif + +#include "nsp32.h" + + +/*********************************************************************** + * Module parameters + */ +static int trans_mode = 0; /* default: BIOS */ +module_param (trans_mode, int, 0); +MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M"); +#define ASYNC_MODE 1 +#define ULTRA20M_MODE 2 + +static int auto_param = 0; /* default: ON */ +module_param (auto_param, bool, 0); +MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)"); + +static int disc_priv = 1; /* default: OFF */ +module_param (disc_priv, bool, 0); +MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))"); + +MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>"); +MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module"); +MODULE_LICENSE("GPL"); + +static const char *nsp32_release_version = "1.2"; + + +/**************************************************************************** + * Supported hardware + */ +static struct pci_device_id nsp32_pci_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_IODATA, + .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_IODATA, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_KME, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_WORKBIT, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_WORKBIT_STANDARD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_PCI_WORKBIT, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_LOGITEC, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_PCI_LOGITEC, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_PCI_MELCO, + }, + { + .vendor = PCI_VENDOR_ID_WORKBIT, + .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = MODEL_PCI_MELCO, + }, + {0,0,}, +}; +MODULE_DEVICE_TABLE(pci, nsp32_pci_table); + +static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */ + + +/* + * Period/AckWidth speed conversion table + * + * Note: This period/ackwidth speed table must be in descending order. + */ +static nsp32_sync_table nsp32_sync_table_40M[] = { + /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */ + {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */ + {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */ + {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */ + {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */ + {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */ + {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */ + {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */ + {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */ + {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */ +}; + +static nsp32_sync_table nsp32_sync_table_20M[] = { + {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */ + {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */ + {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */ + {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */ + {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */ + {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */ + {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */ + {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */ + {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */ +}; + +static nsp32_sync_table nsp32_sync_table_pci[] = { + {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */ + {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */ + {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */ + {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */ + {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */ + {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */ + {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */ + {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */ + {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */ +}; + +/* + * function declaration + */ +/* module entry point */ +static int __devinit nsp32_probe (struct pci_dev *, const struct pci_device_id *); +static void __devexit nsp32_remove(struct pci_dev *); +static int __init init_nsp32 (void); +static void __exit exit_nsp32 (void); + +/* struct Scsi_Host_Template */ +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) +static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int); +#else +static int nsp32_proc_info (char *, char **, off_t, int, int, int); +#endif + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) +static int nsp32_detect (struct pci_dev *pdev); +#else +static int nsp32_detect (Scsi_Host_Template *); +#endif +static int nsp32_queuecommand(struct scsi_cmnd *, + void (*done)(struct scsi_cmnd *)); +static const char *nsp32_info (struct Scsi_Host *); +static int nsp32_release (struct Scsi_Host *); + +/* SCSI error handler */ +static int nsp32_eh_abort (struct scsi_cmnd *); +static int nsp32_eh_bus_reset (struct scsi_cmnd *); +static int nsp32_eh_host_reset(struct scsi_cmnd *); + +/* generate SCSI message */ +static void nsp32_build_identify(struct scsi_cmnd *); +static void nsp32_build_nop (struct scsi_cmnd *); +static void nsp32_build_reject (struct scsi_cmnd *); +static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char); + +/* SCSI message handler */ +static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short); +static void nsp32_msgout_occur (struct scsi_cmnd *); +static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short); + +static int nsp32_setup_sg_table (struct scsi_cmnd *); +static int nsp32_selection_autopara(struct scsi_cmnd *); +static int nsp32_selection_autoscsi(struct scsi_cmnd *); +static void nsp32_scsi_done (struct scsi_cmnd *); +static int nsp32_arbitration (struct scsi_cmnd *, unsigned int); +static int nsp32_reselection (struct scsi_cmnd *, unsigned char); +static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int); +static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short); + +/* SCSI SDTR */ +static void nsp32_analyze_sdtr (struct scsi_cmnd *); +static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char); +static void nsp32_set_async (nsp32_hw_data *, nsp32_target *); +static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *); +static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char); + +/* SCSI bus status handler */ +static void nsp32_wait_req (nsp32_hw_data *, int); +static void nsp32_wait_sack (nsp32_hw_data *, int); +static void nsp32_sack_assert (nsp32_hw_data *); +static void nsp32_sack_negate (nsp32_hw_data *); +static void nsp32_do_bus_reset(nsp32_hw_data *); + +/* hardware interrupt handler */ +static irqreturn_t do_nsp32_isr(int, void *, struct pt_regs *); + +/* initialize hardware */ +static int nsp32hw_init(nsp32_hw_data *); + +/* EEPROM handler */ +static int nsp32_getprom_param (nsp32_hw_data *); +static int nsp32_getprom_at24 (nsp32_hw_data *); +static int nsp32_getprom_c16 (nsp32_hw_data *); +static void nsp32_prom_start (nsp32_hw_data *); +static void nsp32_prom_stop (nsp32_hw_data *); +static int nsp32_prom_read (nsp32_hw_data *, int); +static int nsp32_prom_read_bit (nsp32_hw_data *); +static void nsp32_prom_write_bit(nsp32_hw_data *, int); +static void nsp32_prom_set (nsp32_hw_data *, int, int); +static int nsp32_prom_get (nsp32_hw_data *, int); + +/* debug/warning/info message */ +static void nsp32_message (const char *, int, char *, char *, ...); +#ifdef NSP32_DEBUG +static void nsp32_dmessage(const char *, int, int, char *, ...); +#endif + +/* + * max_sectors is currently limited up to 128. + */ +static struct scsi_host_template nsp32_template = { + .proc_name = "nsp32", + .name = "Workbit NinjaSCSI-32Bi/UDE", + .proc_info = nsp32_proc_info, + .info = nsp32_info, + .queuecommand = nsp32_queuecommand, + .can_queue = 1, + .sg_tablesize = NSP32_SG_SIZE, + .max_sectors = 128, + .cmd_per_lun = 1, + .this_id = NSP32_HOST_SCSIID, + .use_clustering = DISABLE_CLUSTERING, + .eh_abort_handler = nsp32_eh_abort, +/* .eh_device_reset_handler = NULL, */ + .eh_bus_reset_handler = nsp32_eh_bus_reset, + .eh_host_reset_handler = nsp32_eh_host_reset, +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,74)) + .detect = nsp32_detect, + .release = nsp32_release, +#endif +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2)) + .use_new_eh_code = 1, +#else +/* .highmem_io = 1, */ +#endif +}; + +#include "nsp32_io.h" + +/*********************************************************************** + * debug, error print + */ +#ifndef NSP32_DEBUG +# define NSP32_DEBUG_MASK 0x000000 +# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args) +# define nsp32_dbg(mask, args...) /* */ +#else +# define NSP32_DEBUG_MASK 0xffffff +# define nsp32_msg(type, args...) \ + nsp32_message (__FUNCTION__, __LINE__, (type), args) +# define nsp32_dbg(mask, args...) \ + nsp32_dmessage(__FUNCTION__, __LINE__, (mask), args) +#endif + +#define NSP32_DEBUG_QUEUECOMMAND BIT(0) +#define NSP32_DEBUG_REGISTER BIT(1) +#define NSP32_DEBUG_AUTOSCSI BIT(2) +#define NSP32_DEBUG_INTR BIT(3) +#define NSP32_DEBUG_SGLIST BIT(4) +#define NSP32_DEBUG_BUSFREE BIT(5) +#define NSP32_DEBUG_CDB_CONTENTS BIT(6) +#define NSP32_DEBUG_RESELECTION BIT(7) +#define NSP32_DEBUG_MSGINOCCUR BIT(8) +#define NSP32_DEBUG_EEPROM BIT(9) +#define NSP32_DEBUG_MSGOUTOCCUR BIT(10) +#define NSP32_DEBUG_BUSRESET BIT(11) +#define NSP32_DEBUG_RESTART BIT(12) +#define NSP32_DEBUG_SYNC BIT(13) +#define NSP32_DEBUG_WAIT BIT(14) +#define NSP32_DEBUG_TARGETFLAG BIT(15) +#define NSP32_DEBUG_PROC BIT(16) +#define NSP32_DEBUG_INIT BIT(17) +#define NSP32_SPECIAL_PRINT_REGISTER BIT(20) + +#define NSP32_DEBUG_BUF_LEN 100 + +static void nsp32_message(const char *func, int line, char *type, char *fmt, ...) +{ + va_list args; + char buf[NSP32_DEBUG_BUF_LEN]; + + va_start(args, fmt); + vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + +#ifndef NSP32_DEBUG + printk("%snsp32: %s\n", type, buf); +#else + printk("%snsp32: %s (%d): %s\n", type, func, line, buf); +#endif +} + +#ifdef NSP32_DEBUG +static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...) +{ + va_list args; + char buf[NSP32_DEBUG_BUF_LEN]; + + va_start(args, fmt); + vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + + if (mask & NSP32_DEBUG_MASK) { + printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); + } +} +#endif + +#ifdef NSP32_DEBUG +# include "nsp32_debug.c" +#else +# define show_command(arg) /* */ +# define show_busphase(arg) /* */ +# define show_autophase(arg) /* */ +#endif + +/* + * IDENTIFY Message + */ +static void nsp32_build_identify(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + int pos = data->msgout_len; + int mode = FALSE; + + /* XXX: Auto DiscPriv detection is progressing... */ + if (disc_priv == 0) { + /* mode = TRUE; */ + } + + data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++; + + data->msgout_len = pos; +} + +/* + * SDTR Message Routine + */ +static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt, + unsigned char period, + unsigned char offset) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + int pos = data->msgout_len; + + data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++; + data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++; + data->msgoutbuf[pos] = EXTENDED_SDTR; pos++; + data->msgoutbuf[pos] = period; pos++; + data->msgoutbuf[pos] = offset; pos++; + + data->msgout_len = pos; +} + +/* + * No Operation Message + */ +static void nsp32_build_nop(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + int pos = data->msgout_len; + + if (pos != 0) { + nsp32_msg(KERN_WARNING, + "Some messages are already contained!"); + return; + } + + data->msgoutbuf[pos] = NOP; pos++; + data->msgout_len = pos; +} + +/* + * Reject Message + */ +static void nsp32_build_reject(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + int pos = data->msgout_len; + + data->msgoutbuf[pos] = MESSAGE_REJECT; pos++; + data->msgout_len = pos; +} + +/* + * timer + */ +#if 0 +static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time) +{ + unsigned int base = SCpnt->host->io_port; + + nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time); + + if (time & (~TIMER_CNT_MASK)) { + nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow"); + } + + nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK); +} +#endif + + +/* + * set SCSI command and other parameter to asic, and start selection phase + */ +static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + unsigned int host_id = SCpnt->device->host->this_id; + unsigned char target = SCpnt->device->id; + nsp32_autoparam *param = data->autoparam; + unsigned char phase; + int i, ret; + unsigned int msgout; + u16_le s; + + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in"); + + /* + * check bus free + */ + phase = nsp32_read1(base, SCSI_BUS_MONITOR); + if (phase != BUSMON_BUS_FREE) { + nsp32_msg(KERN_WARNING, "bus busy"); + show_busphase(phase & BUSMON_PHASE_MASK); + SCpnt->result = DID_BUS_BUSY << 16; + return FALSE; + } + + /* + * message out + * + * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout. + * over 3 messages needs another routine. + */ + if (data->msgout_len == 0) { + nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); + SCpnt->result = DID_ERROR << 16; + return FALSE; + } else if (data->msgout_len > 0 && data->msgout_len <= 3) { + msgout = 0; + for (i = 0; i < data->msgout_len; i++) { + /* + * the sending order of the message is: + * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 + * MCNT 2: MSG#1 -> MSG#2 + * MCNT 1: MSG#2 + */ + msgout >>= 8; + msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24); + } + msgout |= MV_VALID; /* MV valid */ + msgout |= (unsigned int)data->msgout_len; /* len */ + } else { + /* data->msgout_len > 3 */ + msgout = 0; + } + + // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT)); + // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); + + /* + * setup asic parameter + */ + memset(param, 0, sizeof(nsp32_autoparam)); + + /* cdb */ + for (i = 0; i < SCpnt->cmd_len; i++) { + param->cdb[4 * i] = SCpnt->cmnd[i]; + } + + /* outgoing messages */ + param->msgout = cpu_to_le32(msgout); + + /* syncreg, ackwidth, target id, SREQ sampling rate */ + param->syncreg = data->cur_target->syncreg; + param->ackwidth = data->cur_target->ackwidth; + param->target_id = BIT(host_id) | BIT(target); + param->sample_reg = data->cur_target->sample_reg; + + // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg); + + /* command control */ + param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER | + AUTOSCSI_START | + AUTO_MSGIN_00_OR_04 | + AUTO_MSGIN_02 | + AUTO_ATN ); + + + /* transfer control */ + s = 0; + switch (data->trans_method) { + case NSP32_TRANSFER_BUSMASTER: + s |= BM_START; + break; + case NSP32_TRANSFER_MMIO: + s |= CB_MMIO_MODE; + break; + case NSP32_TRANSFER_PIO: + s |= CB_IO_MODE; + break; + default: + nsp32_msg(KERN_ERR, "unknown trans_method"); + break; + } + /* + * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits. + * For bus master transfer, it's taken off. + */ + s |= (TRANSFER_GO | ALL_COUNTER_CLR); + param->transfer_control = cpu_to_le16(s); + + /* sg table addr */ + param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr); + + /* + * transfer parameter to ASIC + */ + nsp32_write4(base, SGT_ADR, data->auto_paddr); + nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER | + AUTO_PARAMETER ); + + /* + * Check arbitration + */ + ret = nsp32_arbitration(SCpnt, base); + + return ret; +} + + +/* + * Selection with AUTO SCSI (without AUTO PARAMETER) + */ +static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + unsigned int host_id = SCpnt->device->host->this_id; + unsigned char target = SCpnt->device->id; + unsigned char phase; + int status; + unsigned short command = 0; + unsigned int msgout = 0; + unsigned short execph; + int i; + + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in"); + + /* + * IRQ disable + */ + nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); + + /* + * check bus line + */ + phase = nsp32_read1(base, SCSI_BUS_MONITOR); + if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) { + nsp32_msg(KERN_WARNING, "bus busy"); + SCpnt->result = DID_BUS_BUSY << 16; + status = 1; + goto out; + } + + /* + * clear execph + */ + execph = nsp32_read2(base, SCSI_EXECUTE_PHASE); + + /* + * clear FIFO counter to set CDBs + */ + nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER); + + /* + * set CDB0 - CDB15 + */ + for (i = 0; i < SCpnt->cmd_len; i++) { + nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]); + } + nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]); + + /* + * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID + */ + nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target)); + + /* + * set SCSI MSGOUT REG + * + * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout. + * over 3 messages needs another routine. + */ + if (data->msgout_len == 0) { + nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); + SCpnt->result = DID_ERROR << 16; + status = 1; + goto out; + } else if (data->msgout_len > 0 && data->msgout_len <= 3) { + msgout = 0; + for (i = 0; i < data->msgout_len; i++) { + /* + * the sending order of the message is: + * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 + * MCNT 2: MSG#1 -> MSG#2 + * MCNT 1: MSG#2 + */ + msgout >>= 8; + msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24); + } + msgout |= MV_VALID; /* MV valid */ + msgout |= (unsigned int)data->msgout_len; /* len */ + nsp32_write4(base, SCSI_MSG_OUT, msgout); + } else { + /* data->msgout_len > 3 */ + nsp32_write4(base, SCSI_MSG_OUT, 0); + } + + /* + * set selection timeout(= 250ms) + */ + nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); + + /* + * set SREQ hazard killer sampling rate + * + * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz. + * check other internal clock! + */ + nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg); + + /* + * clear Arbit + */ + nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR); + + /* + * set SYNCREG + * Don't set BM_START_ADR before setting this register. + */ + nsp32_write1(base, SYNC_REG, data->cur_target->syncreg); + + /* + * set ACKWIDTH + */ + nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth); + + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, + "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x", + nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH), + nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID)); + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x", + data->msgout_len, msgout); + + /* + * set SGT ADDR (physical address) + */ + nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr); + + /* + * set TRANSFER CONTROL REG + */ + command = 0; + command |= (TRANSFER_GO | ALL_COUNTER_CLR); + if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { + if (SCpnt->request_bufflen > 0) { + command |= BM_START; + } + } else if (data->trans_method & NSP32_TRANSFER_MMIO) { + command |= CB_MMIO_MODE; + } else if (data->trans_method & NSP32_TRANSFER_PIO) { + command |= CB_IO_MODE; + } + nsp32_write2(base, TRANSFER_CONTROL, command); + + /* + * start AUTO SCSI, kick off arbitration + */ + command = (CLEAR_CDB_FIFO_POINTER | + AUTOSCSI_START | + AUTO_MSGIN_00_OR_04 | + AUTO_MSGIN_02 | + AUTO_ATN ); + nsp32_write2(base, COMMAND_CONTROL, command); + + /* + * Check arbitration + */ + status = nsp32_arbitration(SCpnt, base); + + out: + /* + * IRQ enable + */ + nsp32_write2(base, IRQ_CONTROL, 0); + + return status; +} + + +/* + * Arbitration Status Check + * + * Note: Arbitration counter is waited during ARBIT_GO is not lifting. + * Using udelay(1) consumes CPU time and system time, but + * arbitration delay time is defined minimal 2.4us in SCSI + * specification, thus udelay works as coarse grained wait timer. + */ +static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base) +{ + unsigned char arbit; + int status = TRUE; + int time = 0; + + do { + arbit = nsp32_read1(base, ARBIT_STATUS); + time++; + } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 && + (time <= ARBIT_TIMEOUT_TIME)); + + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, + "arbit: 0x%x, delay time: %d", arbit, time); + + if (arbit & ARBIT_WIN) { + /* Arbitration succeeded */ + SCpnt->result = DID_OK << 16; + nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */ + } else if (arbit & ARBIT_FAIL) { + /* Arbitration failed */ + SCpnt->result = DID_BUS_BUSY << 16; + status = FALSE; + } else { + /* + * unknown error or ARBIT_GO timeout, + * something lock up! guess no connection. + */ + nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout"); + SCpnt->result = DID_NO_CONNECT << 16; + status = FALSE; + } + + /* + * clear Arbit + */ + nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR); + + return status; +} + + +/* + * reselection + * + * Note: This reselection routine is called from msgin_occur, + * reselection target id&lun must be already set. + * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation. + */ +static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int host_id = SCpnt->device->host->this_id; + unsigned int base = SCpnt->device->host->io_port; + unsigned char tmpid, newid; + + nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter"); + + /* + * calculate reselected SCSI ID + */ + tmpid = nsp32_read1(base, RESELECT_ID); + tmpid &= (~BIT(host_id)); + newid = 0; + while (tmpid) { + if (tmpid & 1) { + break; + } + tmpid >>= 1; + newid++; + } + + /* + * If reselected New ID:LUN is not existed + * or current nexus is not existed, unexpected + * reselection is occurred. Send reject message. + */ + if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) { + nsp32_msg(KERN_WARNING, "unknown id/lun"); + return FALSE; + } else if(data->lunt[newid][newlun].SCpnt == NULL) { + nsp32_msg(KERN_WARNING, "no SCSI command is processing"); + return FALSE; + } + + data->cur_id = newid; + data->cur_lun = newlun; + data->cur_target = &(data->target[newid]); + data->cur_lunt = &(data->lunt[newid][newlun]); + + /* reset SACK/SavedACK counter (or ALL clear?) */ + nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); + + return TRUE; +} + + +/* + * nsp32_setup_sg_table - build scatter gather list for transfer data + * with bus master. + * + * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time. + */ +static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + struct scatterlist *sgl; + nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; + int num, i; + u32_le l; + + if (SCpnt->request_bufflen == 0) { + return TRUE; + } + + if (sgt == NULL) { + nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null"); + return FALSE; + } + + if (SCpnt->use_sg) { + sgl = (struct scatterlist *)SCpnt->request_buffer; + num = pci_map_sg(data->Pci, sgl, SCpnt->use_sg, + SCpnt->sc_data_direction); + for (i = 0; i < num; i++) { + /* + * Build nsp32_sglist, substitute sg dma addresses. + */ + sgt[i].addr = cpu_to_le32(sg_dma_address(sgl)); + sgt[i].len = cpu_to_le32(sg_dma_len(sgl)); + sgl++; + + if (le32_to_cpu(sgt[i].len) > 0x10000) { + nsp32_msg(KERN_ERR, + "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len)); + return FALSE; + } + nsp32_dbg(NSP32_DEBUG_SGLIST, + "num 0x%x : addr 0x%lx len 0x%lx", + i, + le32_to_cpu(sgt[i].addr), + le32_to_cpu(sgt[i].len )); + } + + /* set end mark */ + l = le32_to_cpu(sgt[num-1].len); + sgt[num-1].len = cpu_to_le32(l | SGTEND); + + } else { + SCpnt->SCp.have_data_in = pci_map_single(data->Pci, + SCpnt->request_buffer, SCpnt->request_bufflen, + SCpnt->sc_data_direction); + + sgt[0].addr = cpu_to_le32(SCpnt->SCp.have_data_in); + sgt[0].len = cpu_to_le32(SCpnt->request_bufflen | SGTEND); /* set end mark */ + + if (SCpnt->request_bufflen > 0x10000) { + nsp32_msg(KERN_ERR, + "can't transfer over 64KB at a time, size=0x%lx", SCpnt->request_bufflen); + return FALSE; + } + nsp32_dbg(NSP32_DEBUG_SGLIST, "single : addr 0x%lx len=0x%lx", + le32_to_cpu(sgt[0].addr), + le32_to_cpu(sgt[0].len )); + } + + return TRUE; +} + +static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + nsp32_target *target; + nsp32_lunt *cur_lunt; + int ret; + + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, + "enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x " + "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x", + SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len, + SCpnt->use_sg, SCpnt->request_buffer, SCpnt->request_bufflen); + + if (data->CurrentSC != NULL) { + nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request"); + data->CurrentSC = NULL; + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } + + /* check target ID is not same as this initiator ID */ + if (SCpnt->device->id == SCpnt->device->host->this_id) { + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???"); + SCpnt->result = DID_BAD_TARGET << 16; + done(SCpnt); + return 0; + } + + /* check target LUN is allowable value */ + if (SCpnt->device->lun >= MAX_LUN) { + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun"); + SCpnt->result = DID_BAD_TARGET << 16; + done(SCpnt); + return 0; + } + + show_command(SCpnt); + + SCpnt->scsi_done = done; + data->CurrentSC = SCpnt; + SCpnt->SCp.Status = CHECK_CONDITION; + SCpnt->SCp.Message = 0; + SCpnt->resid = SCpnt->request_bufflen; + + SCpnt->SCp.ptr = (char *) SCpnt->request_buffer; + SCpnt->SCp.this_residual = SCpnt->request_bufflen; + SCpnt->SCp.buffer = NULL; + SCpnt->SCp.buffers_residual = 0; + + /* initialize data */ + data->msgout_len = 0; + data->msgin_len = 0; + cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]); + cur_lunt->SCpnt = SCpnt; + cur_lunt->save_datp = 0; + cur_lunt->msgin03 = FALSE; + data->cur_lunt = cur_lunt; + data->cur_id = SCpnt->device->id; + data->cur_lun = SCpnt->device->lun; + + ret = nsp32_setup_sg_table(SCpnt); + if (ret == FALSE) { + nsp32_msg(KERN_ERR, "SGT fail"); + SCpnt->result = DID_ERROR << 16; + nsp32_scsi_done(SCpnt); + return 0; + } + + /* Build IDENTIFY */ + nsp32_build_identify(SCpnt); + + /* + * If target is the first time to transfer after the reset + * (target don't have SDTR_DONE and SDTR_INITIATOR), sync + * message SDTR is needed to do synchronous transfer. + */ + target = &data->target[SCpnt->device->id]; + data->cur_target = target; + + if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) { + unsigned char period, offset; + + if (trans_mode != ASYNC_MODE) { + nsp32_set_max_sync(data, target, &period, &offset); + nsp32_build_sdtr(SCpnt, period, offset); + target->sync_flag |= SDTR_INITIATOR; + } else { + nsp32_set_async(data, target); + target->sync_flag |= SDTR_DONE; + } + + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, + "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n", + target->limit_entry, period, offset); + } else if (target->sync_flag & SDTR_INITIATOR) { + /* + * It was negotiating SDTR with target, sending from the + * initiator, but there are no chance to remove this flag. + * Set async because we don't get proper negotiation. + */ + nsp32_set_async(data, target); + target->sync_flag &= ~SDTR_INITIATOR; + target->sync_flag |= SDTR_DONE; + + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, + "SDTR_INITIATOR: fall back to async"); + } else if (target->sync_flag & SDTR_TARGET) { + /* + * It was negotiating SDTR with target, sending from target, + * but there are no chance to remove this flag. Set async + * because we don't get proper negotiation. + */ + nsp32_set_async(data, target); + target->sync_flag &= ~SDTR_TARGET; + target->sync_flag |= SDTR_DONE; + + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, + "Unknown SDTR from target is reached, fall back to async."); + } + + nsp32_dbg(NSP32_DEBUG_TARGETFLAG, + "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x", + SCpnt->device->id, target->sync_flag, target->syncreg, + target->ackwidth); + + /* Selection */ + if (auto_param == 0) { + ret = nsp32_selection_autopara(SCpnt); + } else { + ret = nsp32_selection_autoscsi(SCpnt); + } + + if (ret != TRUE) { + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail"); + nsp32_scsi_done(SCpnt); + } + + return 0; +} + +/* initialize asic */ +static int nsp32hw_init(nsp32_hw_data *data) +{ + unsigned int base = data->BaseAddress; + unsigned short irq_stat; + unsigned long lc_reg; + unsigned char power; + + lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE); + if ((lc_reg & 0xff00) == 0) { + lc_reg |= (0x20 << 8); + nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff); + } + + nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); + nsp32_write2(base, TRANSFER_CONTROL, 0); + nsp32_write4(base, BM_CNT, 0); + nsp32_write2(base, SCSI_EXECUTE_PHASE, 0); + + do { + irq_stat = nsp32_read2(base, IRQ_STATUS); + nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat); + } while (irq_stat & IRQSTATUS_ANY_IRQ); + + /* + * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is + * designated by specification. + */ + if ((data->trans_method & NSP32_TRANSFER_PIO) || + (data->trans_method & NSP32_TRANSFER_MMIO)) { + nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40); + nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40); + } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { + nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10); + nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60); + } else { + nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode"); + } + + nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x", + nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT), + nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT)); + + nsp32_index_write1(base, CLOCK_DIV, data->clock); + nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD); + nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */ + + /* + * initialize MISC_WRRD register + * + * Note: Designated parameters is obeyed as following: + * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set. + * MISC_MASTER_TERMINATION_SELECT: It must be set. + * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set. + * MISC_AUTOSEL_TIMING_SEL: It should be set. + * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set. + * MISC_DELAYED_BMSTART: It's selected for safety. + * + * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then + * we have to set TRANSFERCONTROL_BM_START as 0 and set + * appropriate value before restarting bus master transfer. + */ + nsp32_index_write2(base, MISC_WR, + (SCSI_DIRECTION_DETECTOR_SELECT | + DELAYED_BMSTART | + MASTER_TERMINATION_SELECT | + BMREQ_NEGATE_TIMING_SEL | + AUTOSEL_TIMING_SEL | + BMSTOP_CHANGE2_NONDATA_PHASE)); + + nsp32_index_write1(base, TERM_PWR_CONTROL, 0); + power = nsp32_index_read1(base, TERM_PWR_CONTROL); + if (!(power & SENSE)) { + nsp32_msg(KERN_INFO, "term power on"); + nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR); + } + + nsp32_write2(base, TIMER_SET, TIMER_STOP); + nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */ + + nsp32_write1(base, SYNC_REG, 0); + nsp32_write1(base, ACK_WIDTH, 0); + nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); + + /* + * enable to select designated IRQ (except for + * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR) + */ + nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ | + IRQSELECT_SCSIRESET_IRQ | + IRQSELECT_FIFO_SHLD_IRQ | + IRQSELECT_RESELECT_IRQ | + IRQSELECT_PHASE_CHANGE_IRQ | + IRQSELECT_AUTO_SCSI_SEQ_IRQ | + // IRQSELECT_BMCNTERR_IRQ | + IRQSELECT_TARGET_ABORT_IRQ | + IRQSELECT_MASTER_ABORT_IRQ ); + nsp32_write2(base, IRQ_CONTROL, 0); + + /* PCI LED off */ + nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF); + nsp32_index_write1(base, EXT_PORT, LED_OFF); + + return TRUE; +} + + +/* interrupt routine */ +static irqreturn_t do_nsp32_isr(int irq, void *dev_id, struct pt_regs *regs) +{ + nsp32_hw_data *data = dev_id; + unsigned int base = data->BaseAddress; + struct scsi_cmnd *SCpnt = data->CurrentSC; + unsigned short auto_stat, irq_stat, trans_stat; + unsigned char busmon, busphase; + unsigned long flags; + int ret; + int handled = 0; + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) + struct Scsi_Host *host = data->Host; + spin_lock_irqsave(host->host_lock, flags); +#else + spin_lock_irqsave(&io_request_lock, flags); +#endif + + /* + * IRQ check, then enable IRQ mask + */ + irq_stat = nsp32_read2(base, IRQ_STATUS); + nsp32_dbg(NSP32_DEBUG_INTR, + "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat); + /* is this interrupt comes from Ninja asic? */ + if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) { + nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat); + goto out2; + } + handled = 1; + nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); + + busmon = nsp32_read1(base, SCSI_BUS_MONITOR); + busphase = busmon & BUSMON_PHASE_MASK; + + trans_stat = nsp32_read2(base, TRANSFER_STATUS); + if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) { + nsp32_msg(KERN_INFO, "card disconnect"); + if (data->CurrentSC != NULL) { + nsp32_msg(KERN_INFO, "clean up current SCSI command"); + SCpnt->result = DID_BAD_TARGET << 16; + nsp32_scsi_done(SCpnt); + } + goto out; + } + + /* Timer IRQ */ + if (irq_stat & IRQSTATUS_TIMER_IRQ) { + nsp32_dbg(NSP32_DEBUG_INTR, "timer stop"); + nsp32_write2(base, TIMER_SET, TIMER_STOP); + goto out; + } + + /* SCSI reset */ + if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) { + nsp32_msg(KERN_INFO, "detected someone do bus reset"); + nsp32_do_bus_reset(data); + if (SCpnt != NULL) { + SCpnt->result = DID_RESET << 16; + nsp32_scsi_done(SCpnt); + } + goto out; + } + + if (SCpnt == NULL) { + nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened"); + nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); + goto out; + } + + /* + * AutoSCSI Interrupt. + * Note: This interrupt is occurred when AutoSCSI is finished. Then + * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are + * recorded when AutoSCSI sequencer has been processed. + */ + if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) { + /* getting SCSI executed phase */ + auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE); + nsp32_write2(base, SCSI_EXECUTE_PHASE, 0); + + /* Selection Timeout, go busfree phase. */ + if (auto_stat & SELECTION_TIMEOUT) { + nsp32_dbg(NSP32_DEBUG_INTR, + "selection timeout occurred"); + + SCpnt->result = DID_TIME_OUT << 16; + nsp32_scsi_done(SCpnt); + goto out; + } + + if (auto_stat & MSGOUT_PHASE) { + /* + * MsgOut phase was processed. + * If MSG_IN_OCCUER is not set, then MsgOut phase is + * completed. Thus, msgout_len must reset. Otherwise, + * nothing to do here. If MSG_OUT_OCCUER is occurred, + * then we will encounter the condition and check. + */ + if (!(auto_stat & MSG_IN_OCCUER) && + (data->msgout_len <= 3)) { + /* + * !MSG_IN_OCCUER && msgout_len <=3 + * ---> AutoSCSI with MSGOUTreg is processed. + */ + data->msgout_len = 0; + }; + + nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed"); + } + + if ((auto_stat & DATA_IN_PHASE) && + (SCpnt->resid > 0) && + ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) { + printk( "auto+fifo\n"); + //nsp32_pio_read(SCpnt); + } + + if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) { + /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */ + nsp32_dbg(NSP32_DEBUG_INTR, + "Data in/out phase processed"); + + /* read BMCNT, SGT pointer addr */ + nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx", + nsp32_read4(base, BM_CNT)); + nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx", + nsp32_read4(base, SGT_ADR)); + nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx", + nsp32_read4(base, SACK_CNT)); + nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", + nsp32_read4(base, SAVED_SACK_CNT)); + + SCpnt->resid = 0; /* all data transfered! */ + } + + /* + * MsgIn Occur + */ + if (auto_stat & MSG_IN_OCCUER) { + nsp32_msgin_occur(SCpnt, irq_stat, auto_stat); + } + + /* + * MsgOut Occur + */ + if (auto_stat & MSG_OUT_OCCUER) { + nsp32_msgout_occur(SCpnt); + } + + /* + * Bus Free Occur + */ + if (auto_stat & BUS_FREE_OCCUER) { + ret = nsp32_busfree_occur(SCpnt, auto_stat); + if (ret == TRUE) { + goto out; + } + } + + if (auto_stat & STATUS_PHASE) { + /* + * Read CSB and substitute CSB for SCpnt->result + * to save status phase stutas byte. + * scsi error handler checks host_byte (DID_*: + * low level driver to indicate status), then checks + * status_byte (SCSI status byte). + */ + SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN); + } + + if (auto_stat & ILLEGAL_PHASE) { + /* Illegal phase is detected. SACK is not back. */ + nsp32_msg(KERN_WARNING, + "AUTO SCSI ILLEGAL PHASE OCCUR!!!!"); + + /* TODO: currently we don't have any action... bus reset? */ + + /* + * To send back SACK, assert, wait, and negate. + */ + nsp32_sack_assert(data); + nsp32_wait_req(data, NEGATE); + nsp32_sack_negate(data); + + } + + if (auto_stat & COMMAND_PHASE) { + /* nothing to do */ + nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed"); + } + + if (auto_stat & AUTOSCSI_BUSY) { + /* AutoSCSI is running */ + } + + show_autophase(auto_stat); + } + + /* FIFO_SHLD_IRQ */ + if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) { + nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ"); + + switch(busphase) { + case BUSPHASE_DATA_OUT: + nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write"); + + //nsp32_pio_write(SCpnt); + + break; + + case BUSPHASE_DATA_IN: + nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read"); + + //nsp32_pio_read(SCpnt); + + break; + + case BUSPHASE_STATUS: + nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status"); + + SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); + + break; + default: + nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase"); + nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); + show_busphase(busphase); + break; + } + + goto out; + } + + /* Phase Change IRQ */ + if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) { + nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ"); + + switch(busphase) { + case BUSPHASE_MESSAGE_IN: + nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in"); + nsp32_msgin_occur(SCpnt, irq_stat, 0); + break; + default: + nsp32_msg(KERN_WARNING, "phase chg/other phase?"); + nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n", + irq_stat, trans_stat); + show_busphase(busphase); + break; + } + goto out; + } + + /* PCI_IRQ */ + if (irq_stat & IRQSTATUS_PCI_IRQ) { + nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred"); + /* Do nothing */ + } + + /* BMCNTERR_IRQ */ + if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) { + nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! "); + /* + * TODO: To be implemented improving bus master + * transfer reliablity when BMCNTERR is occurred in + * AutoSCSI phase described in specification. + */ + } + +#if 0 + nsp32_dbg(NSP32_DEBUG_INTR, + "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); + show_busphase(busphase); +#endif + + out: + /* disable IRQ mask */ + nsp32_write2(base, IRQ_CONTROL, 0); + + out2: +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) + spin_unlock_irqrestore(host->host_lock, flags); +#else + spin_unlock_irqrestore(&io_request_lock, flags); +#endif + + nsp32_dbg(NSP32_DEBUG_INTR, "exit"); + + return IRQ_RETVAL(handled); +} + +#undef SPRINTF +#define SPRINTF(args...) \ + do { \ + if(length > (pos - buffer)) { \ + pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \ + nsp32_dbg(NSP32_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\ + } \ + } while(0) +static int nsp32_proc_info( +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + struct Scsi_Host *host, +#endif + char *buffer, + char **start, + off_t offset, + int length, +#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + int hostno, +#endif + int inout) +{ + char *pos = buffer; + int thislength; + unsigned long flags; + nsp32_hw_data *data; +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + int hostno; +#else + struct Scsi_Host *host; +#endif + unsigned int base; + unsigned char mode_reg; + int id, speed; + long model; + + /* Write is not supported, just return. */ + if (inout == TRUE) { + return -EINVAL; + } + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + hostno = host->host_no; +#else + /* search this HBA host */ + host = scsi_host_hn_get(hostno); + if (host == NULL) { + return -ESRCH; + } +#endif + data = (nsp32_hw_data *)host->hostdata; + base = host->io_port; + + SPRINTF("NinjaSCSI-32 status\n\n"); + SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version); + SPRINTF("SCSI host No.: %d\n", hostno); + SPRINTF("IRQ: %d\n", host->irq); + SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); + SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); + SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); + SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff); + + mode_reg = nsp32_index_read1(base, CHIP_MODE); + model = data->pci_devid->driver_data; + +#ifdef CONFIG_PM + SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no"); +#endif + SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]); + + spin_lock_irqsave(&(data->Lock), flags); + SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); + spin_unlock_irqrestore(&(data->Lock), flags); + + + SPRINTF("SDTR status\n"); + for (id = 0; id < ARRAY_SIZE(data->target); id++) { + + SPRINTF("id %d: ", id); + + if (id == host->this_id) { + SPRINTF("----- NinjaSCSI-32 host adapter\n"); + continue; + } + + if (data->target[id].sync_flag == SDTR_DONE) { + if (data->target[id].period == 0 && + data->target[id].offset == ASYNC_OFFSET ) { + SPRINTF("async"); + } else { + SPRINTF(" sync"); + } + } else { + SPRINTF(" none"); + } + + if (data->target[id].period != 0) { + + speed = 1000000 / (data->target[id].period * 4); + + SPRINTF(" transfer %d.%dMB/s, offset %d", + speed / 1000, + speed % 1000, + data->target[id].offset + ); + } + SPRINTF("\n"); + } + + + thislength = pos - (buffer + offset); + + if(thislength < 0) { + *start = NULL; + return 0; + } + + + thislength = min(thislength, length); + *start = buffer + offset; + + return thislength; +} +#undef SPRINTF + + + +/* + * Reset parameters and call scsi_done for data->cur_lunt. + * Be careful setting SCpnt->result = DID_* before calling this function. + */ +static void nsp32_scsi_done(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + + /* + * unmap pci + */ + if (SCpnt->request_bufflen == 0) { + goto skip; + } + + if (SCpnt->use_sg) { + pci_unmap_sg(data->Pci, + (struct scatterlist *)SCpnt->buffer, + SCpnt->use_sg, SCpnt->sc_data_direction); + } else { + pci_unmap_single(data->Pci, + (u32)SCpnt->SCp.have_data_in, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); + } + + skip: + /* + * clear TRANSFERCONTROL_BM_START + */ + nsp32_write2(base, TRANSFER_CONTROL, 0); + nsp32_write4(base, BM_CNT, 0); + + /* + * call scsi_done + */ + (*SCpnt->scsi_done)(SCpnt); + + /* + * reset parameters + */ + data->cur_lunt->SCpnt = NULL; + data->cur_lunt = NULL; + data->cur_target = NULL; + data->CurrentSC = NULL; +} + + +/* + * Bus Free Occur + * + * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase + * with ACK reply when below condition is matched: + * MsgIn 00: Command Complete. + * MsgIn 02: Save Data Pointer. + * MsgIn 04: Diconnect. + * In other case, unexpected BUSFREE is detected. + */ +static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + + nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph); + show_autophase(execph); + + nsp32_write4(base, BM_CNT, 0); + nsp32_write2(base, TRANSFER_CONTROL, 0); + + /* + * MsgIn 02: Save Data Pointer + * + * VALID: + * Save Data Pointer is received. Adjust pointer. + * + * NO-VALID: + * SCSI-3 says if Save Data Pointer is not received, then we restart + * processing and we can't adjust any SCSI data pointer in next data + * phase. + */ + if (execph & MSGIN_02_VALID) { + nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid"); + + /* + * Check sack_cnt/saved_sack_cnt, then adjust sg table if + * needed. + */ + if (!(execph & MSGIN_00_VALID) && + ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) { + unsigned int sacklen, s_sacklen; + + /* + * Read SACK count and SAVEDSACK count, then compare. + */ + sacklen = nsp32_read4(base, SACK_CNT ); + s_sacklen = nsp32_read4(base, SAVED_SACK_CNT); + + /* + * If SAVEDSACKCNT == 0, it means SavedDataPointer is + * come after data transfering. + */ + if (s_sacklen > 0) { + /* + * Comparing between sack and savedsack to + * check the condition of AutoMsgIn03. + * + * If they are same, set msgin03 == TRUE, + * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at + * reselection. On the other hand, if they + * aren't same, set msgin03 == FALSE, and + * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at + * reselection. + */ + if (sacklen != s_sacklen) { + data->cur_lunt->msgin03 = FALSE; + } else { + data->cur_lunt->msgin03 = TRUE; + } + + nsp32_adjust_busfree(SCpnt, s_sacklen); + } + } + + /* This value has not substitude with valid value yet... */ + //data->cur_lunt->save_datp = data->cur_datp; + } else { + /* + * no processing. + */ + } + + if (execph & MSGIN_03_VALID) { + /* MsgIn03 was valid to be processed. No need processing. */ + } + + /* + * target SDTR check + */ + if (data->cur_target->sync_flag & SDTR_INITIATOR) { + /* + * SDTR negotiation pulled by the initiator has not + * finished yet. Fall back to ASYNC mode. + */ + nsp32_set_async(data, data->cur_target); + data->cur_target->sync_flag &= ~SDTR_INITIATOR; + data->cur_target->sync_flag |= SDTR_DONE; + } else if (data->cur_target->sync_flag & SDTR_TARGET) { + /* + * SDTR negotiation pulled by the target has been + * negotiating. + */ + if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) { + /* + * If valid message is received, then + * negotiation is succeeded. + */ + } else { + /* + * On the contrary, if unexpected bus free is + * occurred, then negotiation is failed. Fall + * back to ASYNC mode. + */ + nsp32_set_async(data, data->cur_target); + } + data->cur_target->sync_flag &= ~SDTR_TARGET; + data->cur_target->sync_flag |= SDTR_DONE; + } + + /* + * It is always ensured by SCSI standard that initiator + * switches into Bus Free Phase after + * receiving message 00 (Command Complete), 04 (Disconnect). + * It's the reason that processing here is valid. + */ + if (execph & MSGIN_00_VALID) { + /* MsgIn 00: Command Complete */ + nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete"); + + SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); + SCpnt->SCp.Message = 0; + nsp32_dbg(NSP32_DEBUG_BUSFREE, + "normal end stat=0x%x resid=0x%x\n", + SCpnt->SCp.Status, SCpnt->resid); + SCpnt->result = (DID_OK << 16) | + (SCpnt->SCp.Message << 8) | + (SCpnt->SCp.Status << 0); + nsp32_scsi_done(SCpnt); + /* All operation is done */ + return TRUE; + } else if (execph & MSGIN_04_VALID) { + /* MsgIn 04: Disconnect */ + SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); + SCpnt->SCp.Message = 4; + + nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect"); + return TRUE; + } else { + /* Unexpected bus free */ + nsp32_msg(KERN_WARNING, "unexpected bus free occurred"); + + /* DID_ERROR? */ + //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0); + SCpnt->result = DID_ERROR << 16; + nsp32_scsi_done(SCpnt); + return TRUE; + } + return FALSE; +} + + +/* + * nsp32_adjust_busfree - adjusting SG table + * + * Note: This driver adjust the SG table using SCSI ACK + * counter instead of BMCNT counter! + */ +static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + int old_entry = data->cur_entry; + int new_entry; + int sg_num = data->cur_lunt->sg_num; + nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; + unsigned int restlen, sentlen; + u32_le len, addr; + + nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", SCpnt->resid); + + /* adjust saved SACK count with 4 byte start address boundary */ + s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3; + + /* + * calculate new_entry from sack count and each sgt[].len + * calculate the byte which is intent to send + */ + sentlen = 0; + for (new_entry = old_entry; new_entry < sg_num; new_entry++) { + sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND); + if (sentlen > s_sacklen) { + break; + } + } + + /* all sgt is processed */ + if (new_entry == sg_num) { + goto last; + } + + if (sentlen == s_sacklen) { + /* XXX: confirm it's ok or not */ + /* In this case, it's ok because we are at + the head element of the sg. restlen is correctly calculated. */ + } + + /* calculate the rest length for transfering */ + restlen = sentlen - s_sacklen; + + /* update adjusting current SG table entry */ + len = le32_to_cpu(sgt[new_entry].len); + addr = le32_to_cpu(sgt[new_entry].addr); + addr += (len - restlen); + sgt[new_entry].addr = cpu_to_le32(addr); + sgt[new_entry].len = cpu_to_le32(restlen); + + /* set cur_entry with new_entry */ + data->cur_entry = new_entry; + + return; + + last: + if (SCpnt->resid < sentlen) { + nsp32_msg(KERN_ERR, "resid underflow"); + } + + SCpnt->resid -= sentlen; + nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", SCpnt->resid); + + /* update hostdata and lun */ + + return; +} + + +/* + * It's called MsgOut phase occur. + * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in + * message out phase. It, however, has more than 3 messages, + * HBA creates the interrupt and we have to process by hand. + */ +static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + //unsigned short command; + long new_sgtp; + int i; + + nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, + "enter: msgout_len: 0x%x", data->msgout_len); + + /* + * If MsgOut phase is occurred without having any + * message, then No_Operation is sent (SCSI-2). + */ + if (data->msgout_len == 0) { + nsp32_build_nop(SCpnt); + } + + /* + * Set SGTP ADDR current entry for restarting AUTOSCSI, + * because SGTP is incremented next point. + * There is few statement in the specification... + */ + new_sgtp = data->cur_lunt->sglun_paddr + + (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable)); + + /* + * send messages + */ + for (i = 0; i < data->msgout_len; i++) { + nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, + "%d : 0x%x", i, data->msgoutbuf[i]); + + /* + * Check REQ is asserted. + */ + nsp32_wait_req(data, ASSERT); + + if (i == (data->msgout_len - 1)) { + /* + * If the last message, set the AutoSCSI restart + * before send back the ack message. AutoSCSI + * restart automatically negate ATN signal. + */ + //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02); + //nsp32_restart_autoscsi(SCpnt, command); + nsp32_write2(base, COMMAND_CONTROL, + (CLEAR_CDB_FIFO_POINTER | + AUTO_COMMAND_PHASE | + AUTOSCSI_RESTART | + AUTO_MSGIN_00_OR_04 | + AUTO_MSGIN_02 )); + } + /* + * Write data with SACK, then wait sack is + * automatically negated. + */ + nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]); + nsp32_wait_sack(data, NEGATE); + + nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n", + nsp32_read1(base, SCSI_BUS_MONITOR)); + }; + + data->msgout_len = 0; + + nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit"); +} + +/* + * Restart AutoSCSI + * + * Note: Restarting AutoSCSI needs set: + * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL + */ +static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = data->BaseAddress; + unsigned short transfer = 0; + + nsp32_dbg(NSP32_DEBUG_RESTART, "enter"); + + if (data->cur_target == NULL || data->cur_lunt == NULL) { + nsp32_msg(KERN_ERR, "Target or Lun is invalid"); + } + + /* + * set SYNC_REG + * Don't set BM_START_ADR before setting this register. + */ + nsp32_write1(base, SYNC_REG, data->cur_target->syncreg); + + /* + * set ACKWIDTH + */ + nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth); + + /* + * set SREQ hazard killer sampling rate + */ + nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg); + + /* + * set SGT ADDR (physical address) + */ + nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr); + + /* + * set TRANSFER CONTROL REG + */ + transfer = 0; + transfer |= (TRANSFER_GO | ALL_COUNTER_CLR); + if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { + if (SCpnt->request_bufflen > 0) { + transfer |= BM_START; + } + } else if (data->trans_method & NSP32_TRANSFER_MMIO) { + transfer |= CB_MMIO_MODE; + } else if (data->trans_method & NSP32_TRANSFER_PIO) { + transfer |= CB_IO_MODE; + } + nsp32_write2(base, TRANSFER_CONTROL, transfer); + + /* + * restart AutoSCSI + * + * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ? + */ + command |= (CLEAR_CDB_FIFO_POINTER | + AUTO_COMMAND_PHASE | + AUTOSCSI_RESTART ); + nsp32_write2(base, COMMAND_CONTROL, command); + + nsp32_dbg(NSP32_DEBUG_RESTART, "exit"); +} + + +/* + * cannot run automatically message in occur + */ +static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, + unsigned long irq_status, + unsigned short execph) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + unsigned char msg; + unsigned char msgtype; + unsigned char newlun; + unsigned short command = 0; + int msgclear = TRUE; + long new_sgtp; + int ret; + + /* + * read first message + * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure + * of Message-In have to be processed before sending back SCSI ACK. + */ + msg = nsp32_read1(base, SCSI_DATA_IN); + data->msginbuf[(unsigned char)data->msgin_len] = msg; + msgtype = data->msginbuf[0]; + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, + "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x", + data->msgin_len, msg, msgtype); + + /* + * TODO: We need checking whether bus phase is message in? + */ + + /* + * assert SCSI ACK + */ + nsp32_sack_assert(data); + + /* + * processing IDENTIFY + */ + if (msgtype & 0x80) { + if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) { + /* Invalid (non reselect) phase */ + goto reject; + } + + newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */ + ret = nsp32_reselection(SCpnt, newlun); + if (ret == TRUE) { + goto restart; + } else { + goto reject; + } + } + + /* + * processing messages except for IDENTIFY + * + * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO. + */ + switch (msgtype) { + /* + * 1-byte message + */ + case COMMAND_COMPLETE: + case DISCONNECT: + /* + * These messages should not be occurred. + * They should be processed on AutoSCSI sequencer. + */ + nsp32_msg(KERN_WARNING, + "unexpected message of AutoSCSI MsgIn: 0x%x", msg); + break; + + case RESTORE_POINTERS: + /* + * AutoMsgIn03 is disabled, and HBA gets this message. + */ + + if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) { + unsigned int s_sacklen; + + s_sacklen = nsp32_read4(base, SAVED_SACK_CNT); + if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) { + nsp32_adjust_busfree(SCpnt, s_sacklen); + } else { + /* No need to rewrite SGT */ + } + } + data->cur_lunt->msgin03 = FALSE; + + /* Update with the new value */ + + /* reset SACK/SavedACK counter (or ALL clear?) */ + nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); + + /* + * set new sg pointer + */ + new_sgtp = data->cur_lunt->sglun_paddr + + (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable)); + nsp32_write4(base, SGT_ADR, new_sgtp); + + break; + + case SAVE_POINTERS: + /* + * These messages should not be occurred. + * They should be processed on AutoSCSI sequencer. + */ + nsp32_msg (KERN_WARNING, + "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS"); + + break; + + case MESSAGE_REJECT: + /* If previous message_out is sending SDTR, and get + message_reject from target, SDTR negotiation is failed */ + if (data->cur_target->sync_flag & + (SDTR_INITIATOR | SDTR_TARGET)) { + /* + * Current target is negotiating SDTR, but it's + * failed. Fall back to async transfer mode, and set + * SDTR_DONE. + */ + nsp32_set_async(data, data->cur_target); + data->cur_target->sync_flag &= ~SDTR_INITIATOR; + data->cur_target->sync_flag |= SDTR_DONE; + + } + break; + + case LINKED_CMD_COMPLETE: + case LINKED_FLG_CMD_COMPLETE: + /* queue tag is not supported currently */ + nsp32_msg (KERN_WARNING, + "unsupported message: 0x%x", msgtype); + break; + + case INITIATE_RECOVERY: + /* staring ECA (Extended Contingent Allegiance) state. */ + /* This message is declined in SPI2 or later. */ + + goto reject; + + /* + * 2-byte message + */ + case SIMPLE_QUEUE_TAG: + case 0x23: + /* + * 0x23: Ignore_Wide_Residue is not declared in scsi.h. + * No support is needed. + */ + if (data->msgin_len >= 1) { + goto reject; + } + + /* current position is 1-byte of 2 byte */ + msgclear = FALSE; + + break; + + /* + * extended message + */ + case EXTENDED_MESSAGE: + if (data->msgin_len < 1) { + /* + * Current position does not reach 2-byte + * (2-byte is extended message length). + */ + msgclear = FALSE; + break; + } + + if ((data->msginbuf[1] + 1) > data->msgin_len) { + /* + * Current extended message has msginbuf[1] + 2 + * (msgin_len starts counting from 0, so buf[1] + 1). + * If current message position is not finished, + * continue receiving message. + */ + msgclear = FALSE; + break; + } + + /* + * Reach here means regular length of each type of + * extended messages. + */ + switch (data->msginbuf[2]) { + case EXTENDED_MODIFY_DATA_POINTER: + /* TODO */ + goto reject; /* not implemented yet */ + break; + + case EXTENDED_SDTR: + /* + * Exchange this message between initiator and target. + */ + if (data->msgin_len != EXTENDED_SDTR_LEN + 1) { + /* + * received inappropriate message. + */ + goto reject; + break; + } + + nsp32_analyze_sdtr(SCpnt); + + break; + + case EXTENDED_EXTENDED_IDENTIFY: + /* SCSI-I only, not supported. */ + goto reject; /* not implemented yet */ + + break; + + case EXTENDED_WDTR: + goto reject; /* not implemented yet */ + + break; + + default: + goto reject; + } + break; + + default: + goto reject; + } + + restart: + if (msgclear == TRUE) { + data->msgin_len = 0; + + /* + * If restarting AutoSCSI, but there are some message to out + * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0 + * (MV_VALID = 0). When commandcontrol is written with + * AutoSCSI restart, at the same time MsgOutOccur should be + * happened (however, such situation is really possible...?). + */ + if (data->msgout_len > 0) { + nsp32_write4(base, SCSI_MSG_OUT, 0); + command |= AUTO_ATN; + } + + /* + * restart AutoSCSI + * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed. + */ + command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02); + + /* + * If current msgin03 is TRUE, then flag on. + */ + if (data->cur_lunt->msgin03 == TRUE) { + command |= AUTO_MSGIN_03; + } + data->cur_lunt->msgin03 = FALSE; + } else { + data->msgin_len++; + } + + /* + * restart AutoSCSI + */ + nsp32_restart_autoscsi(SCpnt, command); + + /* + * wait SCSI REQ negate for REQ-ACK handshake + */ + nsp32_wait_req(data, NEGATE); + + /* + * negate SCSI ACK + */ + nsp32_sack_negate(data); + + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit"); + + return; + + reject: + nsp32_msg(KERN_WARNING, + "invalid or unsupported MessageIn, rejected. " + "current msg: 0x%x (len: 0x%x), processing msg: 0x%x", + msg, data->msgin_len, msgtype); + nsp32_build_reject(SCpnt); + data->msgin_len = 0; + + goto restart; +} + +/* + * + */ +static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + nsp32_target *target = data->cur_target; + nsp32_sync_table *synct; + unsigned char get_period = data->msginbuf[3]; + unsigned char get_offset = data->msginbuf[4]; + int entry; + int syncnum; + + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter"); + + synct = data->synct; + syncnum = data->syncnum; + + /* + * If this inititor sent the SDTR message, then target responds SDTR, + * initiator SYNCREG, ACKWIDTH from SDTR parameter. + * Messages are not appropriate, then send back reject message. + * If initiator did not send the SDTR, but target sends SDTR, + * initiator calculator the appropriate parameter and send back SDTR. + */ + if (target->sync_flag & SDTR_INITIATOR) { + /* + * Initiator sent SDTR, the target responds and + * send back negotiation SDTR. + */ + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR"); + + target->sync_flag &= ~SDTR_INITIATOR; + target->sync_flag |= SDTR_DONE; + + /* + * offset: + */ + if (get_offset > SYNC_OFFSET) { + /* + * Negotiation is failed, the target send back + * unexpected offset value. + */ + goto reject; + } + + if (get_offset == ASYNC_OFFSET) { + /* + * Negotiation is succeeded, the target want + * to fall back into asynchronous transfer mode. + */ + goto async; + } + + /* + * period: + * Check whether sync period is too short. If too short, + * fall back to async mode. If it's ok, then investigate + * the received sync period. If sync period is acceptable + * between sync table start_period and end_period, then + * set this I_T nexus as sent offset and period. + * If it's not acceptable, send back reject and fall back + * to async mode. + */ + if (get_period < data->synct[0].period_num) { + /* + * Negotiation is failed, the target send back + * unexpected period value. + */ + goto reject; + } + + entry = nsp32_search_period_entry(data, target, get_period); + + if (entry < 0) { + /* + * Target want to use long period which is not + * acceptable NinjaSCSI-32Bi/UDE. + */ + goto reject; + } + + /* + * Set new sync table and offset in this I_T nexus. + */ + nsp32_set_sync_entry(data, target, entry, get_offset); + } else { + /* Target send SDTR to initiator. */ + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR"); + + target->sync_flag |= SDTR_INITIATOR; + + /* offset: */ + if (get_offset > SYNC_OFFSET) { + /* send back as SYNC_OFFSET */ + get_offset = SYNC_OFFSET; + } + + /* period: */ + if (get_period < data->synct[0].period_num) { + get_period = data->synct[0].period_num; + } + + entry = nsp32_search_period_entry(data, target, get_period); + + if (get_offset == ASYNC_OFFSET || entry < 0) { + nsp32_set_async(data, target); + nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET); + } else { + nsp32_set_sync_entry(data, target, entry, get_offset); + nsp32_build_sdtr(SCpnt, get_period, get_offset); + } + } + + target->period = get_period; + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit"); + return; + + reject: + /* + * If the current message is unacceptable, send back to the target + * with reject message. + */ + nsp32_build_reject(SCpnt); + + async: + nsp32_set_async(data, target); /* set as ASYNC transfer mode */ + + target->period = 0; + nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async"); + return; +} + + +/* + * Search config entry number matched in sync_table from given + * target and speed period value. If failed to search, return negative value. + */ +static int nsp32_search_period_entry(nsp32_hw_data *data, + nsp32_target *target, + unsigned char period) +{ + int i; + + if (target->limit_entry >= data->syncnum) { + nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!"); + target->limit_entry = 0; + } + + for (i = target->limit_entry; i < data->syncnum; i++) { + if (period >= data->synct[i].start_period && + period <= data->synct[i].end_period) { + break; + } + } + + /* + * Check given period value is over the sync_table value. + * If so, return max value. + */ + if (i == data->syncnum) { + i = -1; + } + + return i; +} + + +/* + * target <-> initiator use ASYNC transfer + */ +static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target) +{ + unsigned char period = data->synct[target->limit_entry].period_num; + + target->offset = ASYNC_OFFSET; + target->period = 0; + target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET); + target->ackwidth = 0; + target->sample_reg = 0; + + nsp32_dbg(NSP32_DEBUG_SYNC, "set async"); +} + + +/* + * target <-> initiator use maximum SYNC transfer + */ +static void nsp32_set_max_sync(nsp32_hw_data *data, + nsp32_target *target, + unsigned char *period, + unsigned char *offset) +{ + unsigned char period_num, ackwidth; + + period_num = data->synct[target->limit_entry].period_num; + *period = data->synct[target->limit_entry].start_period; + ackwidth = data->synct[target->limit_entry].ackwidth; + *offset = SYNC_OFFSET; + + target->syncreg = TO_SYNCREG(period_num, *offset); + target->ackwidth = ackwidth; + target->offset = *offset; + target->sample_reg = 0; /* disable SREQ sampling */ +} + + +/* + * target <-> initiator use entry number speed + */ +static void nsp32_set_sync_entry(nsp32_hw_data *data, + nsp32_target *target, + int entry, + unsigned char offset) +{ + unsigned char period, ackwidth, sample_rate; + + period = data->synct[entry].period_num; + ackwidth = data->synct[entry].ackwidth; + offset = offset; + sample_rate = data->synct[entry].sample_rate; + + target->syncreg = TO_SYNCREG(period, offset); + target->ackwidth = ackwidth; + target->offset = offset; + target->sample_reg = sample_rate | SAMPLING_ENABLE; + + nsp32_dbg(NSP32_DEBUG_SYNC, "set sync"); +} + + +/* + * It waits until SCSI REQ becomes assertion or negation state. + * + * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then + * connected target responds SCSI REQ negation. We have to wait + * SCSI REQ becomes negation in order to negate SCSI ACK signal for + * REQ-ACK handshake. + */ +static void nsp32_wait_req(nsp32_hw_data *data, int state) +{ + unsigned int base = data->BaseAddress; + int wait_time = 0; + unsigned char bus, req_bit; + + if (!((state == ASSERT) || (state == NEGATE))) { + nsp32_msg(KERN_ERR, "unknown state designation"); + } + /* REQ is BIT(5) */ + req_bit = (state == ASSERT ? BUSMON_REQ : 0); + + do { + bus = nsp32_read1(base, SCSI_BUS_MONITOR); + if ((bus & BUSMON_REQ) == req_bit) { + nsp32_dbg(NSP32_DEBUG_WAIT, + "wait_time: %d", wait_time); + return; + } + udelay(1); + wait_time++; + } while (wait_time < REQSACK_TIMEOUT_TIME); + + nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit); +} + +/* + * It waits until SCSI SACK becomes assertion or negation state. + */ +static void nsp32_wait_sack(nsp32_hw_data *data, int state) +{ + unsigned int base = data->BaseAddress; + int wait_time = 0; + unsigned char bus, ack_bit; + + if (!((state == ASSERT) || (state == NEGATE))) { + nsp32_msg(KERN_ERR, "unknown state designation"); + } + /* ACK is BIT(4) */ + ack_bit = (state == ASSERT ? BUSMON_ACK : 0); + + do { + bus = nsp32_read1(base, SCSI_BUS_MONITOR); + if ((bus & BUSMON_ACK) == ack_bit) { + nsp32_dbg(NSP32_DEBUG_WAIT, + "wait_time: %d", wait_time); + return; + } + udelay(1); + wait_time++; + } while (wait_time < REQSACK_TIMEOUT_TIME); + + nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit); +} + +/* + * assert SCSI ACK + * + * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1. + */ +static void nsp32_sack_assert(nsp32_hw_data *data) +{ + unsigned int base = data->BaseAddress; + unsigned char busctrl; + + busctrl = nsp32_read1(base, SCSI_BUS_CONTROL); + busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB); + nsp32_write1(base, SCSI_BUS_CONTROL, busctrl); +} + +/* + * negate SCSI ACK + */ +static void nsp32_sack_negate(nsp32_hw_data *data) +{ + unsigned int base = data->BaseAddress; + unsigned char busctrl; + + busctrl = nsp32_read1(base, SCSI_BUS_CONTROL); + busctrl &= ~BUSCTL_ACK; + nsp32_write1(base, SCSI_BUS_CONTROL, busctrl); +} + + + +/* + * Note: n_io_port is defined as 0x7f because I/O register port is + * assigned as: + * 0x800-0x8ff: memory mapped I/O port + * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly) + * 0xc00-0xfff: CardBus status registers + */ +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) +#define DETECT_OK 0 +#define DETECT_NG 1 +#define PCIDEV pdev +static int nsp32_detect(struct pci_dev *pdev) +#else +#define DETECT_OK 1 +#define DETECT_NG 0 +#define PCIDEV (data->Pci) +static int nsp32_detect(Scsi_Host_Template *sht) +#endif +{ + struct Scsi_Host *host; /* registered host structure */ + struct resource *res; + nsp32_hw_data *data; + int ret; + int i, j; + + nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); + + /* + * register this HBA as SCSI device + */ +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data)); +#else + host = scsi_register(sht, sizeof(nsp32_hw_data)); +#endif + if (host == NULL) { + nsp32_msg (KERN_ERR, "failed to scsi register"); + goto err; + } + + /* + * set nsp32_hw_data + */ + data = (nsp32_hw_data *)host->hostdata; + + memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data)); + + host->irq = data->IrqNumber; + host->io_port = data->BaseAddress; + host->unique_id = data->BaseAddress; + host->n_io_port = data->NumAddress; + host->base = (unsigned long)data->MmioAddress; +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,63)) + scsi_set_device(host, &PCIDEV->dev); +#else + scsi_set_pci_device(host, PCIDEV); +#endif + + data->Host = host; + spin_lock_init(&(data->Lock)); + + data->cur_lunt = NULL; + data->cur_target = NULL; + + /* + * Bus master transfer mode is supported currently. + */ + data->trans_method = NSP32_TRANSFER_BUSMASTER; + + /* + * Set clock div, CLOCK_4 (HBA has own external clock, and + * dividing * 100ns/4). + * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet. + */ + data->clock = CLOCK_4; + + /* + * Select appropriate nsp32_sync_table and set I_CLOCKDIV. + */ + switch (data->clock) { + case CLOCK_4: + /* If data->clock is CLOCK_4, then select 40M sync table. */ + data->synct = nsp32_sync_table_40M; + data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M); + break; + case CLOCK_2: + /* If data->clock is CLOCK_2, then select 20M sync table. */ + data->synct = nsp32_sync_table_20M; + data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M); + break; + case PCICLK: + /* If data->clock is PCICLK, then select pci sync table. */ + data->synct = nsp32_sync_table_pci; + data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci); + break; + default: + nsp32_msg(KERN_WARNING, + "Invalid clock div is selected, set CLOCK_4."); + /* Use default value CLOCK_4 */ + data->clock = CLOCK_4; + data->synct = nsp32_sync_table_40M; + data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M); + } + + /* + * setup nsp32_lunt + */ + + /* + * setup DMA + */ + if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) { + nsp32_msg (KERN_ERR, "failed to set PCI DMA mask"); + goto scsi_unregister; + } + + /* + * allocate autoparam DMA resource. + */ + data->autoparam = pci_alloc_consistent(PCIDEV, sizeof(nsp32_autoparam), &(data->auto_paddr)); + if (data->autoparam == NULL) { + nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); + goto scsi_unregister; + } + + /* + * allocate scatter-gather DMA resource. + */ + data->sg_list = pci_alloc_consistent(PCIDEV, NSP32_SG_TABLE_SIZE, + &(data->sg_paddr)); + if (data->sg_list == NULL) { + nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); + goto free_autoparam; + } + + for (i = 0; i < ARRAY_SIZE(data->lunt); i++) { + for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) { + int offset = i * ARRAY_SIZE(data->lunt[0]) + j; + nsp32_lunt tmp = { + .SCpnt = NULL, + .save_datp = 0, + .msgin03 = FALSE, + .sg_num = 0, + .cur_entry = 0, + .sglun = &(data->sg_list[offset]), + .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)), + }; + + data->lunt[i][j] = tmp; + } + } + + /* + * setup target + */ + for (i = 0; i < ARRAY_SIZE(data->target); i++) { + nsp32_target *target = &(data->target[i]); + + target->limit_entry = 0; + target->sync_flag = 0; + nsp32_set_async(data, target); + } + + /* + * EEPROM check + */ + ret = nsp32_getprom_param(data); + if (ret == FALSE) { + data->resettime = 3; /* default 3 */ + } + + /* + * setup HBA + */ + nsp32hw_init(data); + + snprintf(data->info_str, sizeof(data->info_str), + "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x", + host->irq, host->io_port, host->n_io_port); + + /* + * SCSI bus reset + * + * Note: It's important to reset SCSI bus in initialization phase. + * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when + * system is coming up, so SCSI devices connected to HBA is set as + * un-asynchronous mode. It brings the merit that this HBA is + * ready to start synchronous transfer without any preparation, + * but we are difficult to control transfer speed. In addition, + * it prevents device transfer speed from effecting EEPROM start-up + * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as + * Auto Mode, then FAST-10M is selected when SCSI devices are + * connected same or more than 4 devices. It should be avoided + * depending on this specification. Thus, resetting the SCSI bus + * restores all connected SCSI devices to asynchronous mode, then + * this driver set SDTR safely later, and we can control all SCSI + * device transfer mode. + */ + nsp32_do_bus_reset(data); + + ret = request_irq(host->irq, do_nsp32_isr, + SA_SHIRQ | SA_SAMPLE_RANDOM, "nsp32", data); + if (ret < 0) { + nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 " + "SCSI PCI controller. Interrupt: %d", host->irq); + goto free_sg_list; + } + + /* + * PCI IO register + */ + res = request_region(host->io_port, host->n_io_port, "nsp32"); + if (res == NULL) { + nsp32_msg(KERN_ERR, + "I/O region 0x%lx+0x%lx is already used", + data->BaseAddress, data->NumAddress); + goto free_irq; + } + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + scsi_add_host (host, &PCIDEV->dev); + scsi_scan_host(host); +#endif + pci_set_drvdata(PCIDEV, host); + return DETECT_OK; + + free_irq: + free_irq(host->irq, data); + + free_sg_list: + pci_free_consistent(PCIDEV, NSP32_SG_TABLE_SIZE, + data->sg_list, data->sg_paddr); + + free_autoparam: + pci_free_consistent(PCIDEV, sizeof(nsp32_autoparam), + data->autoparam, data->auto_paddr); + + scsi_unregister: + scsi_host_put(host); + + err: + return DETECT_NG; +} +#undef DETECT_OK +#undef DETECT_NG +#undef PCIDEV + +static int nsp32_release(struct Scsi_Host *host) +{ + nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; + + if (data->autoparam) { + pci_free_consistent(data->Pci, sizeof(nsp32_autoparam), + data->autoparam, data->auto_paddr); + } + + if (data->sg_list) { + pci_free_consistent(data->Pci, NSP32_SG_TABLE_SIZE, + data->sg_list, data->sg_paddr); + } + + if (host->irq) { + free_irq(host->irq, data); + } + + if (host->io_port && host->n_io_port) { + release_region(host->io_port, host->n_io_port); + } + + if (data->MmioAddress) { + iounmap(data->MmioAddress); + } + + return 0; +} + +static const char *nsp32_info(struct Scsi_Host *shpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata; + + return data->info_str; +} + + +/**************************************************************************** + * error handler + */ +static int nsp32_eh_abort(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + + nsp32_msg(KERN_WARNING, "abort"); + + if (data->cur_lunt->SCpnt == NULL) { + nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed"); + return FAILED; + } + + if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) { + /* reset SDTR negotiation */ + data->cur_target->sync_flag = 0; + nsp32_set_async(data, data->cur_target); + } + + nsp32_write2(base, TRANSFER_CONTROL, 0); + nsp32_write2(base, BM_CNT, 0); + + SCpnt->result = DID_ABORT << 16; + nsp32_scsi_done(SCpnt); + + nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success"); + return SUCCESS; +} + +static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt) +{ + nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; + unsigned int base = SCpnt->device->host->io_port; + + nsp32_msg(KERN_INFO, "Bus Reset"); + nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt); + + nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); + nsp32_do_bus_reset(data); + nsp32_write2(base, IRQ_CONTROL, 0); + + return SUCCESS; /* SCSI bus reset is succeeded at any time. */ +} + +static void nsp32_do_bus_reset(nsp32_hw_data *data) +{ + unsigned int base = data->BaseAddress; + unsigned short intrdat; + int i; + + nsp32_dbg(NSP32_DEBUG_BUSRESET, "in"); + + /* + * stop all transfer + * clear TRANSFERCONTROL_BM_START + * clear counter + */ + nsp32_write2(base, TRANSFER_CONTROL, 0); + nsp32_write4(base, BM_CNT, 0); + nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); + + /* + * fall back to asynchronous transfer mode + * initialize SDTR negotiation flag + */ + for (i = 0; i < ARRAY_SIZE(data->target); i++) { + nsp32_target *target = &data->target[i]; + + target->sync_flag = 0; + nsp32_set_async(data, target); + } + + /* + * reset SCSI bus + */ + nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST); + udelay(RESET_HOLD_TIME); + nsp32_write1(base, SCSI_BUS_CONTROL, 0); + for(i = 0; i < 5; i++) { + intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */ + nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat); + } + + data->CurrentSC = NULL; +} + +static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt) +{ + struct Scsi_Host *host = SCpnt->device->host; + unsigned int base = SCpnt->device->host->io_port; + nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; + + nsp32_msg(KERN_INFO, "Host Reset"); + nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt); + + nsp32hw_init(data); + nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); + nsp32_do_bus_reset(data); + nsp32_write2(base, IRQ_CONTROL, 0); + + return SUCCESS; /* Host reset is succeeded at any time. */ +} + + +/************************************************************************** + * EEPROM handler + */ + +/* + * getting EEPROM parameter + */ +static int nsp32_getprom_param(nsp32_hw_data *data) +{ + int vendor = data->pci_devid->vendor; + int device = data->pci_devid->device; + int ret, val, i; + + /* + * EEPROM checking. + */ + ret = nsp32_prom_read(data, 0x7e); + if (ret != 0x55) { + nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret); + return FALSE; + } + ret = nsp32_prom_read(data, 0x7f); + if (ret != 0xaa) { + nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret); + return FALSE; + } + + /* + * check EEPROM type + */ + if (vendor == PCI_VENDOR_ID_WORKBIT && + device == PCI_DEVICE_ID_WORKBIT_STANDARD) { + ret = nsp32_getprom_c16(data); + } else if (vendor == PCI_VENDOR_ID_WORKBIT && + device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) { + ret = nsp32_getprom_at24(data); + } else if (vendor == PCI_VENDOR_ID_WORKBIT && + device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) { + ret = nsp32_getprom_at24(data); + } else { + nsp32_msg(KERN_WARNING, "Unknown EEPROM"); + ret = FALSE; + } + + /* for debug : SPROM data full checking */ + for (i = 0; i <= 0x1f; i++) { + val = nsp32_prom_read(data, i); + nsp32_dbg(NSP32_DEBUG_EEPROM, + "rom address 0x%x : 0x%x", i, val); + } + + return ret; +} + + +/* + * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map: + * + * ROMADDR + * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) + * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M + * 0x07 : HBA Synchronous Transfer Period + * Value 0: AutoSync, 1: Manual Setting + * 0x08 - 0x0f : Not Used? (0x0) + * 0x10 : Bus Termination + * Value 0: Auto[ON], 1: ON, 2: OFF + * 0x11 : Not Used? (0) + * 0x12 : Bus Reset Delay Time (0x03) + * 0x13 : Bootable CD Support + * Value 0: Disable, 1: Enable + * 0x14 : Device Scan + * Bit 7 6 5 4 3 2 1 0 + * | <-----------------> + * | SCSI ID: Value 0: Skip, 1: YES + * |-> Value 0: ALL scan, Value 1: Manual + * 0x15 - 0x1b : Not Used? (0) + * 0x1c : Constant? (0x01) (clock div?) + * 0x1d - 0x7c : Not Used (0xff) + * 0x7d : Not Used? (0xff) + * 0x7e : Constant (0x55), Validity signature + * 0x7f : Constant (0xaa), Validity signature + */ +static int nsp32_getprom_at24(nsp32_hw_data *data) +{ + int ret, i; + int auto_sync; + nsp32_target *target; + int entry; + + /* + * Reset time which is designated by EEPROM. + * + * TODO: Not used yet. + */ + data->resettime = nsp32_prom_read(data, 0x12); + + /* + * HBA Synchronous Transfer Period + * + * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says + * that if auto_sync is 0 (auto), and connected SCSI devices are + * same or lower than 3, then transfer speed is set as ULTRA-20M. + * On the contrary if connected SCSI devices are same or higher + * than 4, then transfer speed is set as FAST-10M. + * + * I break this rule. The number of connected SCSI devices are + * only ignored. If auto_sync is 0 (auto), then transfer speed is + * forced as ULTRA-20M. + */ + ret = nsp32_prom_read(data, 0x07); + switch (ret) { + case 0: + auto_sync = TRUE; + break; + case 1: + auto_sync = FALSE; + break; + default: + nsp32_msg(KERN_WARNING, + "Unsupported Auto Sync mode. Fall back to manual mode."); + auto_sync = TRUE; + } + + if (trans_mode == ULTRA20M_MODE) { + auto_sync = TRUE; + } + + /* + * each device Synchronous Transfer Period + */ + for (i = 0; i < NSP32_HOST_SCSIID; i++) { + target = &data->target[i]; + if (auto_sync == TRUE) { + target->limit_entry = 0; /* set as ULTRA20M */ + } else { + ret = nsp32_prom_read(data, i); + entry = nsp32_search_period_entry(data, target, ret); + if (entry < 0) { + /* search failed... set maximum speed */ + entry = 0; + } + target->limit_entry = entry; + } + } + + return TRUE; +} + + +/* + * C16 110 (I-O Data: SC-NBD) data map: + * + * ROMADDR + * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) + * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC + * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync) + * 0x08 - 0x0f : Not Used? (0x0) + * 0x10 : Transfer Mode + * Value 0: PIO, 1: Busmater + * 0x11 : Bus Reset Delay Time (0x00-0x20) + * 0x12 : Bus Termination + * Value 0: Disable, 1: Enable + * 0x13 - 0x19 : Disconnection + * Value 0: Disable, 1: Enable + * 0x1a - 0x7c : Not Used? (0) + * 0x7d : Not Used? (0xf8) + * 0x7e : Constant (0x55), Validity signature + * 0x7f : Constant (0xaa), Validity signature + */ +static int nsp32_getprom_c16(nsp32_hw_data *data) +{ + int ret, i; + nsp32_target *target; + int entry, val; + + /* + * Reset time which is designated by EEPROM. + * + * TODO: Not used yet. + */ + data->resettime = nsp32_prom_read(data, 0x11); + + /* + * each device Synchronous Transfer Period + */ + for (i = 0; i < NSP32_HOST_SCSIID; i++) { + target = &data->target[i]; + ret = nsp32_prom_read(data, i); + switch (ret) { + case 0: /* 20MB/s */ + val = 0x0c; + break; + case 1: /* 10MB/s */ + val = 0x19; + break; + case 2: /* 5MB/s */ + val = 0x32; + break; + case 3: /* ASYNC */ + val = 0x00; + break; + default: /* default 20MB/s */ + val = 0x0c; + break; + } + entry = nsp32_search_period_entry(data, target, val); + if (entry < 0 || trans_mode == ULTRA20M_MODE) { + /* search failed... set maximum speed */ + entry = 0; + } + target->limit_entry = entry; + } + + return TRUE; +} + + +/* + * Atmel AT24C01A (drived in 5V) serial EEPROM routines + */ +static int nsp32_prom_read(nsp32_hw_data *data, int romaddr) +{ + int i, val; + + /* start condition */ + nsp32_prom_start(data); + + /* device address */ + nsp32_prom_write_bit(data, 1); /* 1 */ + nsp32_prom_write_bit(data, 0); /* 0 */ + nsp32_prom_write_bit(data, 1); /* 1 */ + nsp32_prom_write_bit(data, 0); /* 0 */ + nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */ + nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */ + nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */ + + /* R/W: W for dummy write */ + nsp32_prom_write_bit(data, 0); + + /* ack */ + nsp32_prom_write_bit(data, 0); + + /* word address */ + for (i = 7; i >= 0; i--) { + nsp32_prom_write_bit(data, ((romaddr >> i) & 1)); + } + + /* ack */ + nsp32_prom_write_bit(data, 0); + + /* start condition */ + nsp32_prom_start(data); + + /* device address */ + nsp32_prom_write_bit(data, 1); /* 1 */ + nsp32_prom_write_bit(data, 0); /* 0 */ + nsp32_prom_write_bit(data, 1); /* 1 */ + nsp32_prom_write_bit(data, 0); /* 0 */ + nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */ + nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */ + nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */ + + /* R/W: R */ + nsp32_prom_write_bit(data, 1); + + /* ack */ + nsp32_prom_write_bit(data, 0); + + /* data... */ + val = 0; + for (i = 7; i >= 0; i--) { + val += (nsp32_prom_read_bit(data) << i); + } + + /* no ack */ + nsp32_prom_write_bit(data, 1); + + /* stop condition */ + nsp32_prom_stop(data); + + return val; +} + +static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val) +{ + int base = data->BaseAddress; + int tmp; + + tmp = nsp32_index_read1(base, SERIAL_ROM_CTL); + + if (val == 0) { + tmp &= ~bit; + } else { + tmp |= bit; + } + + nsp32_index_write1(base, SERIAL_ROM_CTL, tmp); + + udelay(10); +} + +static int nsp32_prom_get(nsp32_hw_data *data, int bit) +{ + int base = data->BaseAddress; + int tmp, ret; + + if (bit != SDA) { + nsp32_msg(KERN_ERR, "return value is not appropriate"); + return 0; + } + + + tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit; + + if (tmp == 0) { + ret = 0; + } else { + ret = 1; + } + + udelay(10); + + return ret; +} + +static void nsp32_prom_start (nsp32_hw_data *data) +{ + /* start condition */ + nsp32_prom_set(data, SCL, 1); + nsp32_prom_set(data, SDA, 1); + nsp32_prom_set(data, ENA, 1); /* output mode */ + nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting + * SDA 1->0 is start condition */ + nsp32_prom_set(data, SCL, 0); +} + +static void nsp32_prom_stop (nsp32_hw_data *data) +{ + /* stop condition */ + nsp32_prom_set(data, SCL, 1); + nsp32_prom_set(data, SDA, 0); + nsp32_prom_set(data, ENA, 1); /* output mode */ + nsp32_prom_set(data, SDA, 1); + nsp32_prom_set(data, SCL, 0); +} + +static void nsp32_prom_write_bit(nsp32_hw_data *data, int val) +{ + /* write */ + nsp32_prom_set(data, SDA, val); + nsp32_prom_set(data, SCL, 1 ); + nsp32_prom_set(data, SCL, 0 ); +} + +static int nsp32_prom_read_bit(nsp32_hw_data *data) +{ + int val; + + /* read */ + nsp32_prom_set(data, ENA, 0); /* input mode */ + nsp32_prom_set(data, SCL, 1); + + val = nsp32_prom_get(data, SDA); + + nsp32_prom_set(data, SCL, 0); + nsp32_prom_set(data, ENA, 1); /* output mode */ + + return val; +} + + +/************************************************************************** + * Power Management + */ +#ifdef CONFIG_PM + +/* Device suspended */ +static int nsp32_suspend(struct pci_dev *pdev, u32 state) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + + nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host); + + pci_save_state (pdev); + pci_disable_device (pdev); + pci_set_power_state(pdev, state); + + return 0; +} + +/* Device woken up */ +static int nsp32_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; + unsigned short reg; + + nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host); + + pci_set_power_state(pdev, 0); + pci_enable_wake (pdev, 0, 0); + pci_restore_state (pdev); + + reg = nsp32_read2(data->BaseAddress, INDEX_REG); + + nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg); + + if (reg == 0xffff) { + nsp32_msg(KERN_INFO, "missing device. abort resume."); + return 0; + } + + nsp32hw_init (data); + nsp32_do_bus_reset(data); + + nsp32_msg(KERN_INFO, "resume success"); + + return 0; +} + +/* Enable wake event */ +static int nsp32_enable_wake(struct pci_dev *pdev, u32 state, int enable) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + + nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host); + + return 0; +} +#endif + +/************************************************************************ + * PCI/Cardbus probe/remove routine + */ +static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int ret; + nsp32_hw_data *data = &nsp32_data_base; + + nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); + + ret = pci_enable_device(pdev); + if (ret) { + nsp32_msg(KERN_ERR, "failed to enable pci device"); + return ret; + } + + data->Pci = pdev; + data->pci_devid = id; + data->IrqNumber = pdev->irq; + data->BaseAddress = pci_resource_start(pdev, 0); + data->NumAddress = pci_resource_len (pdev, 0); + data->MmioAddress = ioremap_nocache(pci_resource_start(pdev, 1), + pci_resource_len (pdev, 1)); + data->MmioLength = pci_resource_len (pdev, 1); + + pci_set_master(pdev); + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + ret = nsp32_detect(pdev); +#else + ret = scsi_register_host(&nsp32_template); +#endif + + nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s", + pdev->irq, + data->MmioAddress, data->MmioLength, + pci_name(pdev), + nsp32_model[id->driver_data]); + + nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret); + + return ret; +} + +static void __devexit nsp32_remove(struct pci_dev *pdev) +{ +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + struct Scsi_Host *host = pci_get_drvdata(pdev); +#endif + + nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) + scsi_remove_host(host); + + nsp32_release(host); + + scsi_host_put(host); +#else + scsi_unregister_host(&nsp32_template); +#endif +} + + + +static struct pci_driver nsp32_driver = { + .name = "nsp32", + .id_table = nsp32_pci_table, + .probe = nsp32_probe, + .remove = __devexit_p(nsp32_remove), +#ifdef CONFIG_PM + .suspend = nsp32_suspend, + .resume = nsp32_resume, + .enable_wake = nsp32_enable_wake, +#endif +}; + +/********************************************************************* + * Moule entry point + */ +static int __init init_nsp32(void) { + nsp32_msg(KERN_INFO, "loading..."); + return pci_module_init(&nsp32_driver); +} + +static void __exit exit_nsp32(void) { + nsp32_msg(KERN_INFO, "unloading..."); + pci_unregister_driver(&nsp32_driver); +} + +module_init(init_nsp32); +module_exit(exit_nsp32); + +/* end */ |