[SCSI] qla2xxx: add support for NPIV

Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.

- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 164 insertions, 0 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8081b637d97e..b79c4dfc2a9c 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -6,8 +6,11 @@
  */
 #include "qla_def.h"
 
+#include <linux/kthread.h>
 #include <linux/vmalloc.h>
 
+int qla24xx_vport_disable(struct fc_vport *, bool);
+
 /* SYSFS attributes --------------------------------------------------------- */
 
 static ssize_t
@@ -959,6 +962,122 @@ qla2x00_get_host_port_state(struct Scsi_Host *shost)
 		fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
 }
 
+static int
+qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
+{
+	int	ret = 0;
+	scsi_qla_host_t *ha = (scsi_qla_host_t *) fc_vport->shost->hostdata;
+	scsi_qla_host_t *vha;
+
+	ret = qla24xx_vport_create_req_sanity_check(fc_vport);
+	if (ret) {
+		DEBUG15(printk("qla24xx_vport_create_req_sanity_check failed, "
+		    "status %x\n", ret));
+		return (ret);
+	}
+
+	vha = qla24xx_create_vhost(fc_vport);
+	if (vha == NULL) {
+		DEBUG15(printk ("qla24xx_create_vhost failed, vha = %p\n",
+		    vha));
+		return FC_VPORT_FAILED;
+	}
+	if (disable) {
+		atomic_set(&vha->vp_state, VP_OFFLINE);
+		fc_vport_set_state(fc_vport, FC_VPORT_DISABLED);
+	} else
+		atomic_set(&vha->vp_state, VP_FAILED);
+
+	/* ready to create vport */
+	qla_printk(KERN_INFO, vha, "VP entry id %d assigned.\n", vha->vp_idx);
+
+	/* initialized vport states */
+	atomic_set(&vha->loop_state, LOOP_DOWN);
+	vha->vp_err_state=  VP_ERR_PORTDWN;
+	vha->vp_prev_err_state=  VP_ERR_UNKWN;
+	/* Check if physical ha port is Up */
+	if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
+	    atomic_read(&ha->loop_state) == LOOP_DEAD) {
+		/* Don't retry or attempt login of this virtual port */
+		DEBUG15(printk ("scsi(%ld): pport loop_state is not UP.\n",
+		    vha->host_no));
+		atomic_set(&vha->loop_state, LOOP_DEAD);
+		if (!disable)
+			fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
+	}
+
+	if (scsi_add_host(vha->host, &fc_vport->dev)) {
+		DEBUG15(printk("scsi(%ld): scsi_add_host failure for VP[%d].\n",
+			vha->host_no, vha->vp_idx));
+		goto vport_create_failed_2;
+	}
+
+	/* initialize attributes */
+	fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
+	fc_host_port_name(vha->host) = wwn_to_u64(vha->port_name);
+	fc_host_supported_classes(vha->host) =
+		fc_host_supported_classes(ha->host);
+	fc_host_supported_speeds(vha->host) =
+		fc_host_supported_speeds(ha->host);
+
+	qla24xx_vport_disable(fc_vport, disable);
+
+	return 0;
+vport_create_failed_2:
+	qla24xx_disable_vp(vha);
+	qla24xx_deallocate_vp_id(vha);
+	kfree(vha->port_name);
+	kfree(vha->node_name);
+	scsi_host_put(vha->host);
+	return FC_VPORT_FAILED;
+}
+
+int
+qla24xx_vport_delete(struct fc_vport *fc_vport)
+{
+	scsi_qla_host_t *ha = (scsi_qla_host_t *) fc_vport->shost->hostdata;
+	scsi_qla_host_t *vha = fc_vport->dd_data;
+
+	qla24xx_disable_vp(vha);
+	qla24xx_deallocate_vp_id(vha);
+
+	down(&ha->vport_sem);
+	ha->cur_vport_count--;
+	clear_bit(vha->vp_idx, (unsigned long *)ha->vp_idx_map);
+	up(&ha->vport_sem);
+
+	kfree(vha->node_name);
+	kfree(vha->port_name);
+
+	if (vha->timer_active) {
+		qla2x00_vp_stop_timer(vha);
+		DEBUG15(printk ("scsi(%ld): timer for the vport[%d] = %p "
+		    "has stopped\n",
+		    vha->host_no, vha->vp_idx, vha));
+        }
+
+	fc_remove_host(vha->host);
+
+	scsi_remove_host(vha->host);
+
+	scsi_host_put(vha->host);
+
+	return 0;
+}
+
+int
+qla24xx_vport_disable(struct fc_vport *fc_vport, bool disable)
+{
+	scsi_qla_host_t *vha = fc_vport->dd_data;
+
+	if (disable)
+		qla24xx_disable_vp(vha);
+	else
+		qla24xx_enable_vp(vha);
+
+	return 0;
+}
+
 struct fc_function_template qla2xxx_transport_functions = {
 
 	.show_host_node_name = 1,
@@ -996,6 +1115,49 @@ struct fc_function_template qla2xxx_transport_functions = {
 
 	.issue_fc_host_lip = qla2x00_issue_lip,
 	.get_fc_host_stats = qla2x00_get_fc_host_stats,
+
+	.vport_create = qla24xx_vport_create,
+	.vport_disable = qla24xx_vport_disable,
+	.vport_delete = qla24xx_vport_delete,
+};
+
+struct fc_function_template qla2xxx_transport_vport_functions = {
+
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+
+	.get_host_port_id = qla2x00_get_host_port_id,
+	.show_host_port_id = 1,
+	.get_host_speed = qla2x00_get_host_speed,
+	.show_host_speed = 1,
+	.get_host_port_type = qla2x00_get_host_port_type,
+	.show_host_port_type = 1,
+	.get_host_symbolic_name = qla2x00_get_host_symbolic_name,
+	.show_host_symbolic_name = 1,
+	.set_host_system_hostname = qla2x00_set_host_system_hostname,
+	.show_host_system_hostname = 1,
+	.get_host_fabric_name = qla2x00_get_host_fabric_name,
+	.show_host_fabric_name = 1,
+	.get_host_port_state = qla2x00_get_host_port_state,
+	.show_host_port_state = 1,
+
+	.dd_fcrport_size = sizeof(struct fc_port *),
+	.show_rport_supported_classes = 1,
+
+	.get_starget_node_name = qla2x00_get_starget_node_name,
+	.show_starget_node_name = 1,
+	.get_starget_port_name = qla2x00_get_starget_port_name,
+	.show_starget_port_name = 1,
+	.get_starget_port_id  = qla2x00_get_starget_port_id,
+	.show_starget_port_id = 1,
+
+	.get_rport_dev_loss_tmo = qla2x00_get_rport_loss_tmo,
+	.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
+	.show_rport_dev_loss_tmo = 1,
+
+	.issue_fc_host_lip = qla2x00_issue_lip,
+	.get_fc_host_stats = qla2x00_get_fc_host_stats,
 };
 
 void
@@ -1004,4 +1166,6 @@ qla2x00_init_host_attr(scsi_qla_host_t *ha)
 	fc_host_node_name(ha->host) = wwn_to_u64(ha->node_name);
 	fc_host_port_name(ha->host) = wwn_to_u64(ha->port_name);
 	fc_host_supported_classes(ha->host) = FC_COS_CLASS3;
+	fc_host_max_npiv_vports(ha->host) = MAX_NUM_VPORT_FABRIC;
+	fc_host_npiv_vports_inuse(ha->host) = ha->cur_vport_count;
 }